Upload
amondey666
View
69
Download
3
Tags:
Embed Size (px)
DESCRIPTION
How to CAR2PC E46
Citation preview
Geekmatica - HOWTO: Car2PC Install in 2000 E46 BMW 323i http://www.geekmatica.com/modules.php?name=News&file=article&sid=23
1 of 13 04.05.2007 08:40
Search Topics All Topics 6All Topics
Create an account Home Topics Downloads Your Account Submit News Top 10 May 4, 2007
Modules
Home
Feedback
Journal
OmniFi
Private Messages
Recommend Us
Search
Statistics
Stories Archive
Submit News
Top 10
Topics
Web Links
Your Account
Who's Online
There are currently, 5
guest(s) and 0 member(s)
that are online.
You are Anonymous user.
You can register for free
by clicking here
Languages
Select Interface Language:
English 6English
HOWTO: Car2PC Install in 2000 E46 BMW 323iPosted on Monday, November 07 @ 10:39:54 PST by lincomatic
I recently found out about the Car2PC line of USB to head unit (HU) adapters from indashpc.org.
They allow you to interface your Car PC or other USB-compatible device to your head unit. The
Car2PC emulates a CD changer. It supplies an aux in for your analog audio input, and a USB
interface to allow you to read the HU btns from your computer. While it's kind of pricey, it's not
much more expensive than other CD changer emulators, and gives you the USB interface as well.
I decided to use this device to interface my Omnifi DMP1 MP3 player to my head unit and steering
wheel buttons. The idea is to be able switch tracks with the steering wheel buttons of my Bimmer,
and maybe add some shortcuts to playlists, etc via the HU's buttons. Since Openfi,a replacement
firmware for the DMP1 is open source, it was possible to add the functionality to the DMP1.
My E46 2000 BMW 323i has the stock BMW Business cassette player head unit installed, which uses IBUS.
Therefore, I obtained the Car2PC-USB adapter. There is also a model available for MBUS-compatible HU's, and
Toyota/Lexus/Honda/Acura support is in beta testing. Here is what the unit looks like:
The 4 thin wires go to the head unit for power/ground, and IBUS connection. The black 10-pin connector is for CD
changer emulation. Audio input is via a 1/8" stereo miniplug, and USB connector goes to your PC or other
USB-compatible device. On the host side, the device looks like a USB->Serial adapter. There are two ways to
program it: VCP (virtual comm port) mode, and FT (FTDI mode). I will be getting into more specifics in a future
programming article.
At this point, I've already crimped on the connectors. The wire with the red wrap is twisted together with the
unmarked wire before crimping.
The first step in removing the radio is to pry off the dash trim on the right:
Login
Nickname
Password
Login
Don't have an account yet?
You can create one. As a
registered user you have
some advantages like
theme manager,
comments configuration
and post comments with
your name.
Related Links
More about Audio & Video Tips
News by lincomatic
Most read story about
Audio & Video Tips:
HOWTO: Car2PC Install in
2000 E46 BMW 323i
Article Rating
Average Score: 5
Votes: 6
Please take a second and
vote for this article:
nmlkj
nmlkj
Continuous screenchangerExtrude without interruption ? Get a quote ! www.cofit.com
Pneumatic ComponentsFree catalogs online & by mail. Free 2D/3D Models. Immediate Quote. www.techno-sommer.com
BlitzSafe HON/AUX DMX V1BlitzSafe Audio Input $59.99 enfig.com
DVD player for your car$149 DVD Get one today and pimp it Touch screen, Nav, GPS, multi zone www.tadibrothers.com
Geekmatica - HOWTO: Car2PC Install in 2000 E46 BMW 323i http://www.geekmatica.com/modules.php?name=News&file=article&sid=23
2 of 13 04.05.2007 08:40
Use a suitable flat plastic blade to pry it loose, then pull it straight out. I just wrapped my flat-bladed screwdriver
with electrical tape. Here is what the dash looks like with it removed:
Note that there are 3 pink plastic receivers for the 3 pegs which protrude from the back of the trim (in my photo,
the rightmost one is missing). Here is a backside view of the right side trim. Note the 3 large securing pegs:
nmlkj
nmlkj
nmlkj
Cast my Vote!
Options
Printer Friendly
Send to a Friend
Geekmatica - HOWTO: Car2PC Install in 2000 E46 BMW 323i http://www.geekmatica.com/modules.php?name=News&file=article&sid=23
3 of 13 04.05.2007 08:40
Next, pry up the center trim from the right side:
This is the backside of the center trim:
Geekmatica - HOWTO: Car2PC Install in 2000 E46 BMW 323i http://www.geekmatica.com/modules.php?name=News&file=article&sid=23
4 of 13 04.05.2007 08:40
With the center trim removed, there are 2 screws exposed, one on each side of the head unit. Mine were just
Philips head, but I've heard that some cars have Allen or Torx screws.
Remove the screws, and pull out your head unit:
Geekmatica - HOWTO: Car2PC Install in 2000 E46 BMW 323i http://www.geekmatica.com/modules.php?name=News&file=article&sid=23
5 of 13 04.05.2007 08:40
What's nice is these newer head units don't need to have the code entered when you reconnect the power, so that's
one less nuisance to deal with. Here is what the back of the head unit looks like:
Pry up on the black harness connector to pop it off:
Geekmatica - HOWTO: Car2PC Install in 2000 E46 BMW 323i http://www.geekmatica.com/modules.php?name=News&file=article&sid=23
6 of 13 04.05.2007 08:40
Here is the connector:
and the plug:
Geekmatica - HOWTO: Car2PC Install in 2000 E46 BMW 323i http://www.geekmatica.com/modules.php?name=News&file=article&sid=23
7 of 13 04.05.2007 08:40
If you have a CD changer harness attached to the plug, you will need to remove it, because the audio input
connector connects in its place. Pull out the blue clip to release it:
T-Taps are supplied with the Car2PC to connect into the harness:
Geekmatica - HOWTO: Car2PC Install in 2000 E46 BMW 323i http://www.geekmatica.com/modules.php?name=News&file=article&sid=23
8 of 13 04.05.2007 08:40
Crimp them on to the following wires:
Function Car2PC Harness
GND Black Brown 15
+12V Red Red/Green stripe 9
IBUS Blue White/Red stripe 7
Be extra careful with the IBUS wire ... it's rather thin gauge, and I had to crimp T-Tap may not get a good tight
connection unless you first tighten it up before crimping it on.
Geekmatica - HOWTO: Car2PC Install in 2000 E46 BMW 323i http://www.geekmatica.com/modules.php?name=News&file=article&sid=23
9 of 13 04.05.2007 08:40
Make sure you have good solid connections by testing them with a continuity tester:
Snap the black harness connector back on to the back of the HU. Here is a closeup of the 10-pin audio connector:
Geekmatica - HOWTO: Car2PC Install in 2000 E46 BMW 323i http://www.geekmatica.com/modules.php?name=News&file=article&sid=23
10 of 13 04.05.2007 08:40
It connects to where the CD changer's 10-pin harness used to be. Make sure the silver stripe part is on top, and
insert it firmly:
At this point, you should turn on the HU. Press the CD button. If all the connections are good, you should see it
switch to CD changer mode:
Geekmatica - HOWTO: Car2PC Install in 2000 E46 BMW 323i http://www.geekmatica.com/modules.php?name=News&file=article&sid=23
11 of 13 04.05.2007 08:40
Notice that at this point, my cassette audio adapter is gone (goodbye, Coby cassette adapter... you served me well,
but the constant grinding of your gears was too noisy at traffic lights). Connect an audio source to the mini phone
plug jack and see if you are getting audio. You might want to run the supplied Winamp plugin with your PC, as well,
to make sure everything is working as expected before you start putting everything back together. The Car2PC unit
fits inside the dash, but the most difficult part of the install is getting it to fit in. I crammed it behind the bracket
that receives the big center pin in the rear of the HU. Next, you need to get the USB and audio input wires into your
glove box. Open your glove box. There are two tabs, one on each side, on the top:
Twist the tabs a quarter turn, and the fuse box door will swing down. I used a pair of nabbergrabbers purchased
from a 99 Cent store to pull the wires through. Feed in the nabbergrabber from the top left of the fuse box
compartment:
Geekmatica - HOWTO: Car2PC Install in 2000 E46 BMW 323i http://www.geekmatica.com/modules.php?name=News&file=article&sid=23
12 of 13 04.05.2007 08:40
and then pull each wire through to the glove box:
There is enough space on the left side of the fuse box door to allow you to close it when the wires are coming
through:
Geekmatica - HOWTO: Car2PC Install in 2000 E46 BMW 323i http://www.geekmatica.com/modules.php?name=News&file=article&sid=23
13 of 13 04.05.2007 08:40
Push your radio back in, replace the two securing screws, and reattach the two dash trim pieces. Your install is
done!
I will be posting the code for installing my Openfi to Car2PC interface in the next few days. It allows your HU and
steering wheel buttons to control your Omnfifi DMP1!
Associated Topics
Re: HOWTO: Car2PC Install in 2000 E46 BMW 323i (Score: 1)
by Scott_H on Tuesday, January 10 @ 17:28:34 PST
(User Info | Send a Message)
Hey, i was just wondering if you hadthe full pin diagram of the headunit plug. You labeled a few of the pins
(http://www.geekmatica.com/car2pc/scheme_ibus.gif), but i need to know all of them, think you can help me out?
Re: HOWTO: Car2PC Install in 2000 E46 BMW 323i by lincomatic on Tuesday, February 28 @ 21:57:24 PST
All logos and trademarks in this site are property of their respective owner. The comments are property of their posters, all the rest ? 2005 by lincomatic.
You can syndicate our news using backend.php
PHP-Nuke Copyright 2004 by Francisco Burzi. This is free software, and you may redistribute it under the GPL. PHP-Nuke comes with absolutely no warranty, for details, see the
license.