Power Distributors

FURUTECH

The Daytona 303 Multi-Mode AC Filter/Power Distributor

Featuring Resonance-Damped Receptacles and Locking Plates

EMI-Absorbing Formula GC-303

• 4 unfiltered outlets (FT-D15A (R) X 2)

o Power amplifiers (Direct 1 / Zone 3)

o Preamplifiers, analog devices (Direct 2 / Zone 2)

• 6 Digital filtered outlets (FP-15A-N1(R) X 3)---Transparent

Cover (Zone 1)

o DVD and DVR (Filter 1)

o CD、Cable and SAT(Filter 2)

o TV and Projector (Filter 3)

• All Furutech Pure Transmission Receptacles feature

nonmagnetic

rhodium-plated α (Alpha) phosphor bronze fittings

• Beautifully-crafted highest-grade aluminum panels and painted

steel chassis

o Effectively shields against RFI (Radio Frequency Interference)

• Layer of EMI-absorbing Formula GC-303 bonded to bottom plate

o Effectively shields against EMI (Electro Magnetic Interference)

• Internal wiring: Furutech Alpha-10, 5.5 sq. mm (10 AWG) for low

electrical resistance

• Conductors insulated with resonance-absorbing tubing

• Front panel • 8 indicators for abnormal operation

o Abnormal voltage indicator • Red

o Zone 1, 2, 3 • Green

o Correct path indicator for wiring • Green

o Breaker indicator • Red

o Digital voltage meter • Red

o Digital amperage meter • Red

• Rear panel

o Attachable LED lamp for easy viewing

o Three sets of surge-protected coaxial terminals

o Surge-protected 3-way phone connections 2.5GHz coaxial

connections Input x 1 • Output x 2

o 3 Remote control triggers

AC 100~120V In/DC 3~30V In/DC 12V Out

o Standard rack mounting plates

o Sequence switch

o Voltage selector switch for 120V AC (60Hz) or 100V AC

(50/60Hz)

o Display Dimmer switch for Display panel Light or Normal

• All conductors treated with Furutech’s α (Alpha) Cryogenic

and Demagnetizing Process

Daytona 303

(120V NEMA)

168,000.-

Daytona 303

(230V NEMA)

168,000.-

e-TP309

156,000.-

AC Power Distributor e -TP309

Featuring Axial Locking System and EMI-absorbing GC-303

• All conductors treated with Furutech’s α (Alpha) Cryogenic and

Demagnetizing Process

• FT-D15A(R) X1 and FT-S15A(R) X 2 nonmagnetic rhodium-plated α

(Alpha) phosphor bronze Pure Transmission Receptacles feature

nylon/fiberglass bodies incorporating carbon particles forming an

extremely effective nonresonant connector body

• FI-09(R) Rhodium-plated α (Alpha) pure copper IEC Inlet to ensure

Pure Transmission

• Furutech’s Axial Locking System lowers receptacle resonance by a

factor of 10

• Beautifully-crafted highest grade aluminum Carbon fiber finished

cover plate.

• Highest-grade aluminum chassis effectively shields against RFI

(Radio Frequency Interference)

• A layer of Formula GC-303 bonded to the bottom plate effectively

shields against EMI (Electro Magnetic Interference)

• Star-wired conductors using Furutech α (Alpha)-10, 5.5 sq. mm (10

AWG) for low electrical resistance, conductors insulated within

resonance-absorbing tubing

• Dimension: 297(L) X131(W) X70(H) mm ± 1mm (Including feet)

f-TP615

46,100.-

AC Power Filter/Distributor

Featuring Axial Locking System and EMI-Absorbing GC-303

• All conductors treated with Furutech’s α (Alpha) Cryogenic and

Demagnetizing Process

• Nonmagnetic 24k gold-plated α (Alpha) phosphor bronze Pure

Transmission Receptacles feature nylon/fiberglass bodies

incorporating nano-size ceramic particles forming an extremely

effective nonresonant body

• Furutech’s Axial Locking System lowers receptacle resonance by a

factor of 10

• AC-1501 noise-filter inlet features 24k gold-plated α (Alpha) brass

conductors

• Beautifully-crafted highest-grade aluminum chassis effectively

shields against RFI (Radio Frequency Interference)

• Piezo ceramic and nano-carbon damping spikes

• Layer of Formula GC-303 bonded to the bottom plate effectively

shields against EMI (Electro Magnetic Interference)

• Star-wired conductors of Furutech α (Alpha)-22, 3.8 sq. mm (12

AWG) for low electrical resistance insulated inside resonance-

absorbing tubing

e-TP80

35,500.-

GC-303 EMI-Absorbing Internal Coating plus EMI noise filter.

*2 sets EMI noise filter for each of the two duplex Receptacles.

*GC-303 EMI-Absorbing for each of the four duplex Receptacles.

BODY MATERIAL AL. ALLOY PLATE (PAINTED)

OUTWARD SIZE 400X130X60 mm

WEIGHT 1.72Kgs

Formula GC-303

GC-303 is a special material that Furutech layers and bonds to the

interior bottom-plate of the chassis. It actually absorbs EMI

(Electromagnetic Interference) generated by the internal fittings of the

unit. The e-TP80 uses no other filtering besides GC-303 so AC

resistance is kept to a minimum, allowing a more resolving, powerful,

dynamic, and colorful performance from your components.

Power Distributors

FURUTECH

Power 6 AC Power

Distributor

584,000.-

FURUTECH PURE TRANSMISSION POWER 6

LUXURIOUSLY ENGINEERED POWER DISTRIBUTOR

ELIMINATES EMI & RFI

Chassis: CNC machined aerospace-grade aluminum alloy

AC Input/Output:15A IEC input/3 UL-Rated duplex receptacles

Materials Processing: Metal parts treated with α (Alpha)

Cryogenic and Demagnetizing Process

Ground/Earth connection: Chassis Grounding Post

IEC Rhodium-Plated IEC Input

Receptacles:3 High Performance FP-20A (R) Duplex Receptacles

Internal wiring: 3 gauges of high quality twisted-multigauge Teflon-

shielded high-purity silver-plated Alpha-OFC

Solder: Special alloy solder

Size: 8”/250mm W x 8”/250mm H x 3”/95mm D

Weight: 22lbs/10kgs

e-TP4+4

108,800.-

e-TP4+4 Twin Power + GC-303

• A xial Locking System • GC-303 Technology

• Chassis CNC machined from solid aluminum and equipped

With mounting spikes • Special Vibration Dampener Coating

• Output 8 Outlets (4/20A + 4/15A) • Inputs 20A IEC and

Separate 15A IEC

• Dimension 297 mm (W) x 130mm (D) x56mm (H)

• Rated 20A/125V and 15A/125V

• Net Weight 3.15 kgs

e-TP609

71,000.-

e-TP609 Power Distributor

•Features Axial Locking System

•GC-303 EMI-Absorbent Internal Coating

•Chassis CNC machined from solid block aluminum and

equipped with mounting spikes

•Outputs: 6 Outlets "Starwired"

•Input: 15A/125V IEC

e-TP60/20

43,500.-

e-TP60/20 Power Distributor

• Features Axial Locking System

• G-762-18 Power Cord with 15A/20A Rating

• GC-303 EMI-Absorbing Internal Coating

• All Metal Parts Treated with Furutech’s

• Cryogenic and Demagnetizing Alpha Process

• RATING:125V AC 50/60Hz • CURRENT:20 A

• OUTLETS:6 Holes • FILTER TYPE: Passive GC-303 Absorbs

EMI noise • MOVEMENT TEMP.:-10

℃

~40

℃• PRESERVATIVE TEMP.:-20

℃

~50

℃

Power Distributors

FURUTECH

e-TP60

20,300.-

e-TP60 Power Distributor

• GC-303 EMI-Absorbing Internal Coating.

Dimensions 200X130X60 mm

WEIGHT 0.94Kgs

Formula GC-303

GC-303 is a special material that Furutech layers and bonds to

the interior bottom-plate of the chassis. It actually absorbs EMI

(Electromagnetic Interference) generated by the internal fittings of

the unit. The e-TP80E uses no other filtering besides GC-303 so

AC resistance is kept to a minimum, allowing a more resolving,

powerful, dynamic, and colorful performance from your

components

FP-1363-D Box

25,700.-

FP-1363-D(R) Power Distributor

High Performance Duplex UK Mains Power Distributor

• The beautifully crafted special grade aluminum chassis

effectively shields against RFI (Radio Frequency

Interference).Material thickness: chassis and side plates 5.0mm

• Nonmagnetic Rhodium plated FP-1363-D(R) Schuko socket star-

wired to a FI-10(R) IEC Inlet. .

• Piezo ceramic and nano-carbon damping spikes.

• A layer of Formula GC-303 bonded to the bottom plate

effectively shields against EMI (Electro Magnetic Interference)

• Star-wired Furutech α (Alpha) -14, 2.0 sq. mm (14 AWG)

conductors for low electrical resistance, conductors insulated

within resonance-absorbing tubing.

• Dimensions: 159.0mm (L) x 108.0mm (W) x 60.0mm (H) without

FP-1363-D and spikes.

e-TP309E

(Europeversion)

156,000.-

AC Power Distributor e -TP309E

• All conductors treated with Furutech’s α (Alpha) Cryogenic and

Demagnetizing Process

• FT-SDS(R) X4 nonmagnetic rhodium-plated α (Alpha) pure

copper Pure Transmission schuko outlets feature nylon/fiberglass

bodies incorporating carbon particles forming an extremely

effective nonresonant connector body

• FI-09(R) Rhodium-plated α (Alpha) pure copper IEC Inlet to

ensure Pure Transmission

• Furutech’s Axial Locking System lowers receptacle resonance

by a factor of 10

• Beautifully-crafted highest grade aluminum Carbon fiber finished

plate.

• Highest-grade aluminum chassis effectively shields against RFI

(Radio Frequency Interference)

• A layer of Formula GC-303 bonded to the bottom plate

effectively shields against EMI (Electro Magnetic Interference)

• Star-wired conductors using Furutech α (Alpha)-10, 5.5 sq. mm

(10 AWG) for low electrical resistance, conductors insulated

within resonance-absorbing tubing

• Dimension: 298(L) X141(W) X80(H) mm ± 1mm (Including feet)

Power Distributors

FURUTECH

f-TP615E

(Europeversion)

50,000.-

f－TP 615E AC Power Filter/Distributor

• All conductors treated with Furutech’s α (Alpha) Cryogenic and

Demagnetizing Process

• Nonmagnetic Rhodium-plated α (Alpha) pure copper Pure

Transmission schuko sockets

• Piezo ceramic and nano-carbon damping spikes

• Furutech’s Axial Locking System lowers receptacle resonance

by a factor of 10

• AC-1501 noise filter inlet features Rhodium-plated α (Alpha)

Copper Alloy conductors

• Beautifully-crafted highest-grade aluminum chassis effectively

shields against RFI (Radio Frequency Interference)

• A layer of Formula GC-303 bonded to the bottom plate

effectively shields against EMI (Electro Magnetic Interference)

• Star-wired conductors using Furutech α (Alpha)-22, 3.8 sq. mm

(12 AWG) for low electrical resistance, conductors insulated

within resonance-absorbing tubing

e-TP609E

(Europeversion)

71,000.-

e-TP 609E Power Distributor

•Features Axial Locking System

•GC-303 EMI-Absorbent Internal Coating

•Chassis CNC machined from solid block aluminum

and equipped with mounting spikes

• Outputs: 6 Outlets star wired

• 10A/250V IEC

•Dimensions: 266mm (W) x 130mm (D) x 56mm (H)

•Net Weight: 2.85Kgs

•Rated:10A/250V

e-TP60E

(Europeversion)

20,300.-

e-TP 60E Power Distributor

GC-303 EMI-Absorbing Internal Coating.

BODY MATERIAL AL. ALLOY PLATE (PAINTED)

Dimensions: 200X130X60 mm

WEIGHT 0.95Kgs

Formula GC-303

VOLTAGE AC 250V 50/60Hz

CURRENT 10A

LOADING WATT. 2500 W

Outlets:6 holes

FP-SWS-D(R)

9,100.-

FP-SWS-D(R) Power Distributor

High Performance Duplex SCHUKO Power Distributor

• The beautifully crafted special grade aluminum chassis

effectively shields against RFI (Radio Frequency Interference).

Material thickness: chassis and side plates 5.0mm

• Nonmagnetic Rhodium plated FP-SWS-D(R) Schuko socket

star-wired to a FI-10(R) IEC Inlet.

• Piezo ceramic and nano-carbon damping spikes.

• A layer of Formula GC-303 bonded to the bottom plate

effectively shields against EMI (Electro Magnetic Interference)

• Star-wired Furutech α (Alpha) -14, 2.0 sq. mm (14 AWG)

conductors for low electrical resistance, conductors insulated

within resonance-absorbing tubing.

• Dimensions: 159.0mm (L) x 108.0mm (W) x 60.0mm (H) without

FP-SWS-D and spikes

Power Distributors

FURUTECH

e-TP80E

(Europeversion)

35,500.-

e-TP80E AC Power Filter

GC-303 EMI-Absorbing Internal Coating plus EMI noise filter.

*2 sets EMI noise filter for four schuko sockets.

*GC-303 EMI-Absorbing for each of the eight schuko sockets

VOLTAGE AC 250V 50/60Hz

CURRENT 10A

LOADING WATT. 2500 W

GROUNDING SCHUKO socket 8 outlets

OVERLODE PROTECTIVE TYPE AUTOMATIC CIRCUIT

BREAKER

INSULATION VOLT. AC 1500V 1 MINUTE 5mA

LEAKAGE CURRENT UNDER 1.0mA

INSULATION RESISTANCE 300MΩ ABOVE DC 500V

BODY MATERIAL AL. ALLOY PLATE (PAINTED)

DIMENSIONS: 400X130X60 mm

WEIGHT 1.72Kgs

Power Distributors

FURUTECH

Power Distributors

FURUTECH

Daytona 303E Multi Mode Power Filter

The Daytona 303E Multi-Mode AC Filter/Power Distributor

Featuring Resonance-Damped sockets and EMI-Absorbing

Formula GC-303

• All conductors treated with Furutech’s α (Alpha) Cryogenic and

Demagnetizing Process

• 4 unfiltered SCHUKO outlets

o Power amplifiers (Direct 1 / Zone 3) (FI-E30 (R) X 2)

o Preamplifiers, analog devices (Direct 2 / Zone 2) (FI-E30 (R) X

2)

• 4 Digital filtered SCHUKO outlets (Zone 1)

o DVD (Filter 3) (FI-E30 (R) X 1)

o CD (Filter 2) (FI-E30 (R) X 1)

o TV and Projector (Filter 1) (FI-E30 (R) X 2)

• Pure Transmission High Performance Receptacles

o Nonmagnetic Rhodium-plated α (Alpha) phosphor bronze

• Beautifully-crafted highest grade aluminum panel and painted

steel chassis

o Effectively shields against RFI (Radio Frequency Interference)

• Layer of Formula GC-303 bonded to bottom plate

o Effectively shields against EMI (Electro Magnetic Interference)

• Internal wiring: INPUT/Furutech Alpha-10, 5.5 sq. mm (10 AWG),

OUTPUT/

Furutech Alpha-12, 3.5 sq. mm (12 AWG) for low electrical

resistance

• PCB with Nonmagnetic 24k gold-plated

• WIMA High Performance Main Capacitors

• Front panel --- Eight indicators for effective check of abnormal

voltage or

amperage ---

o abnormal voltage indicator (Red)

o Zone 1、2、3 (Green)

o Correct path indicator for wiring (Green)

o Breaker indicator (Red)

o Digital voltage meter(Red)

o Digital amperage meter(Red)

• Rear panel ---

o Attachable LED Lamp for easy check or change of connections

o Three sets of surge protected 2.5GHz coaxial terminals

o Surge protected 3-way (Input x 1 + Output X 2) phone

connections

o 3 Remote control AC 230V In / DC 3~30V In / DC 12V Out

(attachment)

o Sequence Switch

o Display Dimmer switch for Display panel Light or Normal

Daytona 303E

(Europe version)

168,000.-