10
FABRICATION PLANT - 15 ACRES UNDER ROOF SHEET METAL QUALITY CONTROL FURTHERQUALITYCONTROL BYUSINGOUROWNTUBEMILL LEADING THE TECHNOLOGY RACE Although Priefert has been a mainstay in the US Equine Industry since 1964, Priefert Aus- tralia has now been serving the Australian horseman and woman for over four years. Priefert has worked its way to being the leader of its industry with its technology, ingenuity, and craftsmanship. Priefert’s products and expertise are the result of many years of hands-on experience within the Equine Industry. All of our key staff have each spent the last thirty years of their lives learning and growing within the industry, working with horses in many different disci- plines. They have all travelled the world and seen the best and worst of horse equipment, bringing that experience into the company, ensuring that your needs and concerns are met by all staff. It has been Priefert’s consistent production of higher quality equipment that has raised the bar in the Australian Horse Industry. Priefert has been identified as “first class quality and design” by Australia’s leading architects, de- signers and firms. Our product has shined through as being well ahead of the accepted standard in Powder Coating, and our welding and design techniques set the example for others to follow. Horse Safety has become more important than ever and Priefert has surpassed its com- petitors with special safety features from qual- ity welding (with no spikes and slag through) to our door latches and rounded-edge prod- ucts. For too long, Australians have been given a lack of variety in equipment, and as a result, been left to settle for nothing more than sec- ond rate worksmanship, poor design, and overpriced equipment. When nothing but the best will do for your farm or complex, Priefert Australia is simply the solution. We can ac- commodate any budget, any design, and any size. Whether you have one horse, or one hundred, at Priefert, you can rest assured that their needs for safety and quality are met. After all, every owner deserves first class serv- ice, without the first class pricetag.

Full Priefert Equine Products 2011

Embed Size (px)

DESCRIPTION

Horse broschure

Citation preview

Page 1: Full Priefert Equine Products 2011

FABRICATION PLANT - 15 ACRES UNDER ROOF

SHEET METAL QUALITY CONTROL

FURTHER QUALITY CONTROL BY USING OUR OWN TUBE MILL

LEADING THE TECHNOLOGY RACE

Although Priefert has been a mainstay in the US Equine Industry since 1964, Priefert Aus-tralia has now been serving the Australian horseman and woman for over four years. Priefert has worked its way to being the leader of its industry with its technology, ingenuity, and craftsmanship.

Priefert’s products and expertise are the result of many years of hands-on experience within the Equine Industry. All of our key staff have each spent the last thirty years of their lives learning and growing within the industry, working with horses in many diff erent disci-plines. They have all travelled the world and seen the best and worst of horse equipment, bringing that experience into the company, ensuring that your needs and concerns are met by all staff .

It has been Priefert’s consistent production of higher quality equipment that has raised the bar in the Australian Horse Industry. Priefert has been identifi ed as “fi rst class quality and design” by Australia’s leading architects, de-signers and fi rms. Our product has shined through as being well ahead of the accepted standard in Powder Coating, and our welding and design techniques set the example for others to follow.

Horse Safety has become more important than ever and Priefert has surpassed its com-petitors with special safety features from qual-ity welding (with no spikes and slag through) to our door latches and rounded-edge prod-ucts.

For too long, Australians have been given a lack of variety in equipment, and as a result, been left to settle for nothing more than sec-ond rate worksmanship, poor design, and overpriced equipment. When nothing but the best will do for your farm or complex, Priefert Australia is simply the solution. We can ac-commodate any budget, any design, and any size. Whether you have one horse, or one hundred, at Priefert, you can rest assured that their needs for safety and quality are met.

After all, every owner deserves fi rst class serv-ice, without the fi rst class pricetag.

Page 2: Full Priefert Equine Products 2011

AELEC TAMWORTH 478 STALLS BELOW STALL PANELS

PREMIER PANEL W/VERTICAL RAIL

PREMIER FRONT W/VERTICAL RAIL & POLY BOTTOMPREMIER FRONT W/WIRE TOP & POLY BOTTOM

PREMIER FRONT W/WIRE TOP

PREMIER WIRE FRONT PREMIER WIRE PANEL

PREMIER FRONT CENTRE W/WIRE TOP

PREMIER SERIESPriefert’s Premier Series Stalls have been a mainstay in the equine industry for decades. These stalls are currently used in thousands of barns across the globe.

Premier stalls are safe, attractive and aff ordable with several options to choose from. We off er a variety of styles to meet the needs and desires of even the most selective equine enthusiasts.

• All stall fronts come standard with your choice of a feeder or win-dow. (Optional feeder includes hay rack and grain bucket). • No tools required! Standard connectors allow for free-standing stalls. Special connectors available for stall-to-wall or post connection.

• Slide Action Door Latch - Just pull downward on the fi rst vertical bar of the door and the door is ready to roll out of the way for full width opening. Roll fully shut and the spring loaded bar will latch in place.

H BLOCK INGLIS OAKLAND BELOW 2000 STALL COMPLEX

WINDOW AND

FEEDER OPTIONS

PREMIER FRONT W/VERTICAL RAIL

• Using our standard connectors, assembled stalls will be on

3.05m (10ft ) or 3.66m (12ft ) centers and 2.13m (7ft ) high.

• Actual stable panel length 10ft (3m) 12ft (3.6m).

• Doorway is 1.2m (4ft ) wide when fully opened.

• Spacing between bars is 55mm. Wire mesh is 50mm x

50mm heavy 4 gauge (5.89mm) wire.

• Poly is 6.45mm (1/4 inch) thick High Density Polyethylene.

• Timber is pre-cut, stained 2” x 8” (50mm x 200mm) tongue

and grooved ti mber.

• Priefert premier stalls are horse safe and are one of the

most aff ordable producti on stalls on the market.

Page 3: Full Priefert Equine Products 2011

HUNTER KENTUCKY

CHURCHILL HERMITAGE

WINSTAR PRESIDENT’E

SONRISE PINK CROWN

DIAMOND SERIESPriefert’s Diamond series is the crème de la crème of horse stables. There is simply no other stall manufacturer in the world that can compete with the combination of style, ingenuity, design, functionality, durability, or beauty of the Diamond series. The horse stalls in this series are true works of art.

Designed by horse people, developed by engineers and built by master craftsmen, the Diamond Series has no rival in overall quality and aesthet-ics. Each component is hand crafted in Priefert’s custom shop and no de-tail is left unchecked. Attention to detail is the key to great looking stalls. In order to maintain our standards of quality control, we own and operate our own in-house electroplating line. You can customise your Diamond Series stable with a variety of accents and fi nishes.

Some of our accents include: post toppers, name plates, stall numbers, signs and plaques. Various fi nishes are also available such as: painted, painted w/ brush fi nish, aluminium highlights, bright brass, antique brass, and bright aluminium.

Unlike other fabricators, Priefert allows you to choose your own tubing style, whether it be hammered or smooth square, or the traditional round tubing. Multiple powder coating colours are also available with a choice of fl at, gloss, or textured options.

Our attention to detail doesn’t stop there. To ensure maximum quality in every stable, we even manufacture our own hinges in-house to custom fi t your stall. Each stall is then powdercoated with an architectural grade of powder (many colors to choose from) and baked on for a furniture-like fi nish that will endure the elements for years to come.

Many types of exotic woods from around the world are available as well as traditional pine and hardwood, and now bamboo.

Looking for something custom? Work with our craftsman to design your own!

STABLE PANELS ON PRE CAST CONCRETE

STABLE PANELS BETWEEN CUSTOM BRICK WORK

STABLE PANELS BETWEEN EXISTING STEEL COLUMNS

Page 4: Full Priefert Equine Products 2011

Available in a variety of sizes, colors and styles, these structures are ideal for protecting horses, livestock, hay, or equipment from the elements. The pre-engineered design allows room to grow and change with your needs. Optional shelter skids are available making individual shelters easy to move from one location to another. The versatility of the new Priefert Shelters and Utility Barns make them a great choice for future growth.

Like all Priefert Products, the Priefert Shelters and Utility Barns begin with strong steel construction. Add to that a great powder coat fi nish and a 160km wind rating and you have the durable, dependable product that you expect Priefert to provide. These shelters combine easily with our Priefert Panels and Stable Fronts to create custom confi nement areas for horses and livestock.

SINGLE OPEN SHELTER SHK#01 UTILITY BARN WITH BREEZEWAY SHK#22

DOUBLE SHELTER SHK#19 3 BAY CLOSED SHELTER SHK#18

RAISED CENTRE AISLE BARN 3 BAY STABLE & FEED ROOM RASIED CENTRE AISLE BARN

RAISED CENTRE AISLE BARN WITH AWNING, OFFICE, FEED ROOM, TACK ROOM & EIGHT STABLES

SHELTERS & UTILITY BARNS

4 BAY SHELTER SHK#07

SINGLE CLOSED SHELTER SHK#13

2 STABLE 1 TACK ROOM SHELTER SHK#15

Shelters come complete with everything you need

to get started including: 26 gauge sheet metal roof,

mounti ng hardware, and wood- as designated by kits.

Shelter roofs have a 1:12 roof pitch and are 3m

(10ft ) tall at the front and 2.7m (9ft ) tall at the back.

(Heights of uti lity barns depend on the design.)

All stables/bays are 3.6m x 3.6m (12ft x 12ft ).

Opti ons of poly, ti mber or bamboo stable available..

Various feeders, waters and auto waters available.

Choice of ply board, poly or rubber internal linings.

Three fixing options; ground anchors,

concrete clips and skid kits

♦♦♦♦♦

Page 5: Full Priefert Equine Products 2011

THE ONLYREMOTE CONTROLWALKER ON THE MARKET

SERIOUS “HORSE POWER” - The power of a Siemens 3 horse power motor has the strength, speed, and torque to withstand 910kg of downward pull while conditioning up to eight horses at once. (Three phase power not required. All walkers have an emergency shutoff .)

PLANETARY GEAR BOX - Never worry about burning belts again! Priefert Horse Walkers run on a planetary gear box system for years of virtually maintenance free, reliable operation.

WIRELESS REMOTE OR CONTROL BOX OPERATED - The convenient pocket-sized remote control allows you to alter speed and direction at the touch of a button. Bring your horses from a slow walk to a fast trot, then switch to reverse for a complete workout. The walker also comes with a master control box featuring large labeled buttons or an optional touch screen, for easy operation and programmable, customized workouts.

SIX HORSE LEAD WALKER

THREE SIZE AND PANEL TYPES TO CHOOSE FROM

WALKERS

6 STANDARD COLOURS TO CHOOSE FROM

The Priefert Panel Walker is the Rolls Royce of walkers. There is no other horse walker on the market that is as advanced as the Priefert Panel Walker system. It is the walker used by the leading horsemen and women of many diff erent disciplines.

With independent electrically charged, free-swinging divider panels, horses that have a tendency to lag behind are encouraged to keep pace. Each of these divider panels is made of heavy duty 2”x 2” (50mm x 50mm) gauge wire mesh and the electrical charge is optionally activated at the control box. All divider panel have adjustable heights.

OPTIONAL ADJUSTABLE DRAG & SPRINKLER

PANEL CAN BE ELECTRIFIED WITH A FLICK OF A SWITCH

WALKERS CAN BE EASILY PLACED UNDER A ROOF

12 MOST COMMON WALKER PROBLEMS OTHER PRIEFERT 1 Burning & stretching belts 2 Stretching & snapping chains 3 Electric tape pulled off 4 Rubber pulling off 5 Horses going under dividers 6 Guide/drive wheels rattling off 7 Walker won’t run in damp wet conditions 8 Have to push start walker 9 Horses hipping gate10 Motor blowing up or burning out11 Maintance12 Noise Note: Only service required is one grease nipple twice per annum

N/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/A

Page 6: Full Priefert Equine Products 2011

1

2

3

4

5

Inner bevel provides superior stability

1.

Outer bevel allows pipe to conform to various terrains

1.

Drilled and pressure treated for long life and durability

1.FENCING IS ABLE TO CURVE AT CORNERS

ONE TO FOUR RAILS AVAIIABLE

STUD FARM FENCINGWOOD POSTSAll wood posts are dense American Pine and pressure treated before all holes are drilled. They are then treated agin to ensure the longevity of the wood. Every wood post comes with a domed top for safety and water shed.

DRILLED for VERSATILITYThe holes drilled for tubing are coned shaped for fl exibility over terrain and in and around curves. This innovative design fi ts the outer diameter of the tubing in the center of the hole while allowing the tubing freedom of movement towards the outer dimensions of the drilled post.

STEEL RAILAll steel rail is Galvanized Pipe Powder Coated for longevity and durability. Two sizes to choose from 48mm and 61mm diameter. Many colours available.

EASY END ASSEMBLY(1) Galvanized Pipe (2)

Phosphate Adhesion Wash (3) Conversion Coating (4) UV Inhibitor (5) Powder Coating

AVAIIABLE WIRE CABLE

ENTRANCE TO THE BACK PADDOCK

SAVE $$$$$ON FAST, EASYINSTALLATION!!!!

Page 7: Full Priefert Equine Products 2011

PANELS CAN BE PERMANENT OR PORTABLE

GATES BUILT INTO THE PANELS ALLOW FOR SAFER AND AFFORDABLE OPTIONS

PANELS CAN BE ATTACHED TO EXISTING POSTS

PREMIER PANELS - Horse-Safe®For over 25 years Priefert’s Premier Panels have proven to be the best there is in performing their original objective to be “Tough Enough for Cattle, Safe Enough for Horses”! This is our “fi rst” panel and the one that provides the most versatility, superior durability, and arguably the best value of any panel on the market. Our unique “Quadraform” tubing off ers increased fl exibility while providing amazing capacity for remaining upright should an animal try to go over it. The single-piece vertical stay through drilled rails adds even more strength and safety. These panels are a wise investment for the welfare of your animals.

PANELS

UTILITY PANELS - Horse-Safe® Our #1 Horse Panel for round pens and other enclosures where heavy pressure is not expected. Priefert’s Utility Panels are versatile and safe for the vast majority of horse owners’ needs. “Fishhook” tops combined with oval end frames and chain connectors help insure a snug fi t with no space left between panels. J-Legs help keep panels from sinking in soft ground and allow panels to be slid when portability is required

PREMIER PANEL

SOLID BOTTOM ROUND YARDS

BUILT IN GATE IS 4FT 1.2M WIDE

UTILITY WALK-THRU PANEL

Page 8: Full Priefert Equine Products 2011

The Horse Paddock feeder is the ultimate paddock feeder. It has an optional 8ft x 9ft (2.4m x 2.7m) roof so the feed will stay dry in nearly all conditions. It also disperses water away from the feeder.

With the feeder’s broad stance, it has a high wind rating, but the feeder can be pinned down if needed. Designed to be movable on skids so that you can move around frequently so as not to ‘camp out’ your paddocks. To move, simply hook onto quad bike or vehicle and move away, or two people can simply push around.

Very popular among stud stock owners due to the complete safety design.

PADDOCK FEEDERS HORSE CRUSHThis Priefert Horse Crush is designed to fi t in with your existing barn or stables. It can be bolted to a concrete pad or it can come with its own plat-form so it is not a permanent structure if that suits your facility.

Built with safety fi rst, this crush is liked very much by the veterinary world. The diff erence with our crush is that you can see and have access to the whole horse. As the vast majority of horse injuries are to the leg, the Priefert crush will allow good safe access to the whole limb....not just the rear end!

When used properly, our crush can help reduce the dangers for staff when x-raying horses. Emergency side exits on both sides of the crush

We are also able to provide you with horsesafe mare and foal crushes.• Easy to assemble, comes with simple assembly instructions.

• Powder coat on Galvanized legs, Solid Steel Construction

• Galvanized Sheet Metal Roof spreads 8’ x 9’ 4” (2.4m

x 2.7m) and measures 8’4” (2.5m) from the ground to the

low eave

• Rounded Roof allows for appropriate watershed

• Can come as a single pack or for a deal we offer a 5 pack rate.

• Architectural Grade Powder Coat Finish Frame

• Anchors for Feeder Legs Included

• Economical, yet safe for restraint of horses during groom-

ing or veterinary procedures• Heavy duty/durable and optional heavy duty rubber platform• Adjustable rear & front door height• Exits on both sides. Architectural grade powder coat finish

• Includes swing down Tie Bar for IV drips, dental work and

other vetting procedures• Completely assembled in 15 minutes.

Page 9: Full Priefert Equine Products 2011

Priefert's saddle racks come in multiple confi gurations to hold one to eight saddles. Every saddle rack includes blanket bars and horseshoe holders to hold bridles and halters. Spinning "carousel style" saddle racks provide easy access to saddles without taking up much space in your tack room. Add-on sections and wall mounting kits are also available.

The Horse Round Bale Feeder is especially designed for feeding round baled hay to horses SAFELY - no top bars (tombstones) creating potential hazard, will not rub manes out.

Priefert’s Hay Grain Feeder is the most durable and safest, single horse hay and/or grain feeder. It can withstand physical abuse commonly infl icted by stalled horses on the market.

For convenient feeding without entering the stable, choose Priefert’s Premier Stall Feeder as an option with the Priefert Premier Stable Front.

• Bolt on brackets hang feeder on panels or 2” (50mm) timber rails.• Adjustable height that mounts fl ush to wall without• Architectural grade powder coat fi nish which will give the feeder protection from corrosive pre-mix feeds.• Guaranteed to last years longer than plastic varieties at the same or less price.

ACCESSORIES

Automatic waters is all steel with fl oat and valve system plus drain plug. (6, 10 and 15 litre avaliable)

Dirt fl oors are diffi cult to manage and keep clean. Digging out “problem areas” is a constant nui-sance. Tender Foot Rubber Mats eliminate ‘digging’ by giving you an even fl oor that provides stress-relieving qualities for your horse while reducing cleaning time. No more digging out wet spots.

TENDER FOOT RUBBER MATS

A small amount of bedding used in conjunction with the mats absorb the wet spots on top of the mat, allowing you to clean nearly 100% of waste and odour. With Tender Foot Rubber Mats, the amount of cleaning and maintenance re-quired is greatly reduced.

Mats are 4ft x 6ft (1.2m x 1.8m) in size, 19mm (3/4 inch) thick and weight 43kg

Horse Feeder with hay rack is our most eco-nomical, and one of our most popular feed-ers.Designed to handle 1-2 bales of hay, this Feeder will catch the valuable leaf in the basin which can also hold grain or feed mix.The liner is poly so that your feeder does not rust out as feeds these days have a high salt content

WHY PRIEFERT POWDER COAT?

SADDLE RACKS

1

2

3

4

5

(1) BLACK STEEL OR GALVANIZED PIPE. (2) PHOSPHATE ADHESION WASH (3)

CONVERSION COATING (4) UV INHIBITOR (5) POWDER COATING

CAN YOU AFFORD THE RISK......

PRIEFERT ARCHITECTURAL GRADE POWDER COATING IS LEADING THE WAY IN POWDER COATING TECHONOLGY.

BEFORE POWDER COATING ALL ITEMS GO THROUGH A MULTI POINT QUALITY AS-SURANCE TEST AFTER THEY HAVE BEEN FABRICATED.

THE PRODUCT THEN GOES THROUGH SEVERAL PREPARATION STAGES (SOME STAGES STILL REMAIN CONFIDENTIAL) TO CLEAN THE STEEL PRODUCT OF ALL HARMFUL IMPURITIES AND TO ENSURE THE PAINT ADHERES SOUNDLY.

ONCE IN THE POWDER COAT ROOM, THE POWDER PAINT IS APPLIED USING ELEC-TROSTATIC PAINT GUNS AND IS THEN BAKED ON FOR APPROXIMATELY TWENTY MINUTES TO ENSURE THE TOUGHEST ADHESION HAS TAKEN PLACE.

THE PAINT DEPTH ON ALL PRODUCTS IS THEN MEASURED ELECTRONICALLY TO ENSURE THE PRESCRIBED AMOUNT OF PAINT HAS ADHERED. ALL THIS ENSURES THAT YOU ARE LEFT WITH A QUALITY PRODUCT THAT WILL STAND THE TEST OF TIME AND WORK WHILE BEING AESTHETICALLY PLEASING & SAFE.

HOWEVER, IF HOT DIPPED GAL IS WHAT YOU PREFER, WE DO IT AS WELL.

WATERS

TM

Page 10: Full Priefert Equine Products 2011

At Priefert Australia, all of our key staff members have each spent the last thirty years of their lives learning and growing within the Equine Industry and working with horses in many diff erent disciplines. What we bring to your table is a library of ideas, technology and designs from all over the world.

Our industry is like most industries where technology marches forward, and while the “wheel” can’t be reinvented, it can continually be improved. At Priefert, we will off er you choice, options, and our expertise. We will help you avoid unnecessary and costly decisions and select the most suitable design and equipment for your purposes.

Our directors have a close, personal relationship with some of the world’s leading equine architects, who are ready to help you build your dream. If you are working on a more modest scale, or simply wish to improve your existing facility, we have all the resources to help you not only create a plan, but help you build it. Planning from a horse person’s perspective will ensure that your requirements are met and understood.

A horse needs to be able to move freely through your facility, doorways, and wash bays without having to negotiate blind corners, bad surfaces, danger-ous equipment, and “spooky spots”. A horse can’t express what is best for it, but we can. Our one-on-one consultations will cater to your horse’s needs, and to yours.