Full Circle® Cuttings Reinjection Baroid’s Drilling Waste Management Solutions

Full Circle® Cuttings Reinjection

Baroid’s Drilling Waste Management Solutions

http://www.halliburton.com/

2 © 2014 HALLIBURTON. ALL RIGHTS RESERVED.

Why Baroid?

1925 Filed patent for first barite-based drilling fluid

1930 First mud school

1932 First mud-testing procedures and kit

1939 First mud-logging service

1940s Pioneers service by air and sea

1950s Invents foam drilling technology

1960s Invents oil-based fluid, Invermul® system

1970s Develops new fluids for hostile geology

1980s Develops mud loop testing, improves waste management

1990s Pioneers biodegradable invert drilling fluids

2000s Rolls out first families of clay-free syntheticand high performance water-based fluids

2010s Introduces automated mud monitoring equipment to industry


customer CHALLENGE

Dispose of drilling waste economically, safely,

compliantly


customer CHALLENGE Maximize oil recovery for re-use in system

Reduce disposal volumes

Safe transportation of drilling associated waste

Environmental compliance

Improve environmental leadership image through reduction of waste disposal, resource consumption, GHG emissions, transportation exposure

Minimization of environmental liabilities when disposing


Baroid’sSOLUTION

Baroid’s FullCircle® cuttings reinjection (CRI) service for treatment and downhole injection of drill cuttings helps to: Lower costs Eliminate steps – such as

transportation (annular injection)

Meet environmental requirements


Baroid’s FullCircle® injection system delivers significant advantages to operators. It requires no transportation and handling.

value PROPOSITION


Cuttings Reinjection applications: Onshore operations Offshore operations

APPLICATIONS


offshore APPLICATIONS

Conveyance/Transport Cuttings Processing Injection


offshore Peripheral Equipment

Honeycomb base tanks SupaVac – Vacuum Transfer System


onshore APPLICATIONS

Transportation Cuttings Processing Injection


onshore Peripheral Equipment

Hammermill SupaVac – Vacuum Transfer System


comparativeOffshore vs. Onshore

Offshore OnshorePower • Limited Power Availability from

the Rig Generators• Can be provided from the main

grid or from Generators

Footprint • Minimum Possible • No Restrictions

Electrical • Must comply with stringent offshore regulations

• Can comply with General Industrial Regulations

Throughput • To allow injection in real time • Limited with formation

Contingency Storage • Bulk Tanks• Skips

• Pits• Bulk Tanks• Skips

Redundancy • 100% requirement • Depending on the remoteness of the locations

Real time injection • Required • Can be done in both offline and in real time

Most common injection type • Annular • Both Annular and Dedicated Well


keyFEATURES

• Small Footprint

• Modular Lifting System

• All equipment is provided in “plug and play” mode

• All electrical equipment on the skids should be suitable for Zone II area use

• Slurry unit can be integrated Cuttings Bulk Tanks and Pneumatic Cuttings Conveyance Systems

• System can include Hammermill for Cuttings Grinding if required


Slurrification UnitSlurrification Unit: Minimal footprint Compact designs requirement Good overview on operations Avoid any NPT and drilling

interruption 100% redundancy Real time injection while drilling Should be easily Mobilized and

Demobilized when needed High Capital Cost


customer BENEFITS• Modular design allows addition or replacement of modules

as required,• Compact design provides lowest footprint for the

installations with limited deck space,• 100% redundancy provided with twin pump system

provided for each module,• Interchangeable parts allows ease and quick

maintenance,• Can be installed anywhere on the deck where space is

available,• Process Cuttings in the Real Time while drilling


consistent QUALITY


laboratorySUPPORT

Analytical technical support Bioassay technical support Reservoir fluids technical services Drilling fluids technical services Industrial drilling products lab Quality assurance Research and development

Baroid’s Laboratory Services include:

Baroid scientists and engineers work with state of the art equipment and an extensive global database in order to perform comprehensive testing analysis on a global scale.


Discover Baroid’sECOSYSTEM

http://www.halliburton.com/ps/default.aspx?navid=1004&pageid=2424

Documents

Full Circle® Cuttings Reinjection Baroid’s Drilling Waste Management Solutions