Embed Size (px)
Citation preview
Dedicated to the volumetric reduction of drill solids waste and associated disposal expenses, ensuring environmental regulatory compliance while maximizing recovery of valuable base fluids.
CSI and the Environment
The WSM Vertical Centrifuge set the industry standards in field testing which meets the US EPA standards of Best Available Technology Economically Achievable (BAT) and Best Practical Control Technology Currently Available (BPT) establishing environmental parameters for allowable fluids discard on drill cuttings. Providing simultaneous reduction of operating cost and capital expense (substantially less than competitors), CSI’s Waste Solids Manage-ment (WSM) vertical centrifuges are internationally recognized for dramatic decreases in drill solids waste discharge and maximum recovery of drilling fluids (synthetic, oil, or ester based).
Improved Maintenance Characteristics for Less Downtime
All normal wear parts are conveniently accessible from the top of the ma-chine. Belts can be easily changed without removing the drive assembly and the entire drive assembly was thoughtfully designed to be removed with little effort.
CENTRIFUGAL SERVICES INC .
WSM-04 CONTINUOUS CENTRIFUGE
CSI’s Waste Solids Management (WSM) Continuous Vertical
Centrifuges can recover up to 95% of
drilling fluids.
The substantial reduction in liquid/oil adhesion
yields retort analysis of WSM discards ranging
from 6% to as low as 1% oil by weight.
DIMENSIONS Size:
L 99-1/16” x W 87-7/8” x H 67-1/4”
Weight:
7,700 lbs.
5595 Highway 34 North Raleigh, IL 62977
Phone: 618-268-4850 Fax: 618-268-4573
Email: [email protected]
Tore Rygh • Company Manager • [email protected] mob. +47 918 90 242 • phone +47 51 70 97 40 • fax +47 51 70 97 41Koppholen 20 4313 Sandnes Norway • www.ott-as.no
Office +47 51 70 97 40Fax +47 51 70 97 41www.ott-as.no
OTT asSkvadronvegen 22 4050 Sola Norway
CUTTINGs DRIER
INFORMATION:
Onsite Treatment Technologies AS has a large rental fl eet covering most aspects of the drill cuttings handling operations onshore & offshore. We also have other type of equipment as for example hydraulic power packs, generators, mud skips, vacuum skips, air compressors, tanks and storage capacities, vacuum systems, swarf removal systems, fi ltration systems, high pressure triplex pumps and more. We have equipment in operation in the North Sea, Norway, Denmark, United kingdom, Holland, United States, Ghana, Nigeria, Malaysia and more.
CUTTINGS DRIER
Dedicated to the volumetric reduction of drill solids waste and associated disposal expenses, ensuring environmental regulatory compliance while maximizing recovery of valuable base fl uids.The CSI Cuttings Drier type WSM – 04 Continuous Vertical Centrifuge (drier) can recover up to 96% of drilling fl uids on cuttings. The substantial reduction in liquid/oil adhesion yields retort analysis of WSM discards ranging from 6% to as low as 1% oil by weight.
Dedicated to the volumetric reduction of drill solids waste and associated disposal expenses, ensuring environmental regulatory compliance while maximizing recovery of valuable base fluids.
CSI and the Environment
The WSM Vertical Centrifuge set the industry standards in field testing which meets the US EPA standards of Best Available Technology Economically Achievable (BAT) and Best Practical Control Technology Currently Available (BPT) establishing environmental parameters for allowable fluids discard on drill cuttings. Providing simultaneous reduction of operating cost and capital expense (substantially less than competitors), CSI’s Waste Solids Manage-ment (WSM) vertical centrifuges are internationally recognized for dramatic decreases in drill solids waste discharge and maximum recovery of drilling fluids (synthetic, oil, or ester based).
Improved Maintenance Characteristics for Less Downtime
All normal wear parts are conveniently accessible from the top of the ma-chine. Belts can be easily changed without removing the drive assembly and the entire drive assembly was thoughtfully designed to be removed with little effort.
CENTRIFUGAL SERVICES INC .
WSM-04 CONTINUOUS CENTRIFUGE
CSI’s Waste Solids Management (WSM) Continuous Vertical
Centrifuges can recover up to 95% of
drilling fluids.
The substantial reduction in liquid/oil adhesion
yields retort analysis of WSM discards ranging
from 6% to as low as 1% oil by weight.
DIMENSIONS Size:
L 99-1/16” x W 87-7/8” x H 67-1/4”
Weight:
7,700 lbs.
5595 Highway 34 North Raleigh, IL 62977
Phone: 618-268-4850 Fax: 618-268-4573
Email: [email protected]
Office +47 51 70 97 40Fax +47 51 70 97 41www.ott-as.no
OTT asSkvadronvegen 22 4050 Sola Norway
CUTTINGs DRIER
CENTRIFUGAL SERVICES INC .
WSM-04 CONTINUOUS CENTRIFUGE
5595 Highway 34 North Raleigh, IL 62977
Phone: 618-268-4850 Fax: 618-268-4573
Email: [email protected]
Technical Specifications: SCREENS Screen Area: 13.3 sqft Screen Type: Profile wire (opening depends on requirement) 0.020” is standard, unless specified Requires Approx. 8 gals. E.P. Gear Oil ISO 68
(Shipped With)
Pennzoil—Maxol EP 68
Shell —Omala 68
Texaco —Meropa 68
Mobil —Mobil Gear 626
Exxon —Spartan EP68
Amoco —Perma Gear EP68
Chevron —Ultra Gear 68
Oil Pump Motor Specifications: Weight: 27 lbs. Horsepower: 1/2 Classification: Explosion proof Class 1 Division 1 Voltage/Frequency: Variable
Main Drive Motor Specifications: Weight: 1,100 lbs. Horsepower: 75 Classification: Explosion proof Class 1 Division 1 Voltage/Frequency: Variable
The WSM Vertical Centrifuge set the industry standards in field operations which meets the standards of Best Available Technology Eco-nomically Achievable (BAT) and Best Practical Control Technology Currently Available (BPT) establishing environmental parameters for allowable fluids discard on drill cuttings. Providing simultaneous reduction of operating cost and capital expense (substantially less than competitors), vertical centrifuges are internationally recognized for dramatic decreases in drill solids waste discharge and maximum recovery of drilling fluids (synthetic, oil, or ester based). Improved maintenance characteristics for less downtime. All normal wear parts are conveniently accessible from the top of the machine. Belts can be easily changed without removing the drive assembly and the entire drive assembly was thoughtfully designed to be removed with few efforts.
The unit comes with a stand, the starter panel and a set spare screen 1 off.
Tore Rygh • Company Manager • [email protected] mob. +47 918 90 242 • phone +47 51 70 97 40 • fax +47 51 70 97 41Koppholen 20 4313 Sandnes Norway • www.ott-as.no
