filtec Asia Ltd Flat 4-6, 3/F, Block B, Shatin Industrial
Centre, 5-7 Yuen Shun Circuit, Shatin, Hongkong.
Tel.+852 2637 7100 Fax +852 2637 7411 www.filtec-asia.com
FMS Training Assessment
1) What are the functions of the Filler Management System
perform a. Detect Low fill, High fill & Missing cap bottle and
reject it b. Monitor Low fill & High fill valves; detect
problem valves in earlier state and
correct the problem immediately, so to prevent product loss
during the production.
c. Perform filler and capper sampling during high speed
production. d. All above answer a, b & c ..( )
2) The X-Ray System is use for .. a. Low fill inspection b. Over
fill inspection c. Both Low & Over fill inspection d. None of
the above .( )
3) The RF System is use for a. Low fill inspection b. Over fill
inspection c. Both Low & Over fill inspection d. None of the
above .( )
4) State all types of sampling function the FMS can provide a.
Consecutive and Random sampling for both filler and capper b.
Consecutive and Random sampling for filler only c. Consecutive and
Random sampling for capper only d. Consecutive sampling for both
filler and capper ..( )
5) N1 is the sensor offset setting from a. Capper head one to
outfeed sensor b. Valve one sensor to outfeed sensor c. Outfeed
sensor to Trigger sensor d. Valve one sensor to head one sensor (
)
filtec Asia Ltd Flat 4-6, 3/F, Block B, Shatin Industrial
Centre, 5-7 Yuen Shun Circuit, Shatin, Hongkong.
Tel.+852 2637 7100 Fax +852 2637 7411 www.filtec-asia.com
Name all the above items 1 to 8
1) _____________________________ 2)
_____________________________
3) _____________________________ 4)
_____________________________
5) _____________________________ 6)
_____________________________
7) _____________________________ 8)
_____________________________
