FLOK TEK INDUSTRIL PRINT 26-12-15 - Flowtek Valves

C O M P A N Y P R O F I L E

www.flowtekvalves.com

HISTORY

MISSION STATEMENT

VISION

VALUES

REGISTRATION & CERTIFICATION

The story of Flow-Tek Valves & Controls Inc began more than 20 years ago, when

founder Mr. K.B. Patel decided to expand his existing machine shop to begin designing

and manufacturing control valves in Ahmedabad, India. He established his company with

a vision of commitment to quality and reliability.

Since its modest beginning, Flow-Tek Valves & Controls Inc has maintained that vision

while becoming a worldwide leader along with India in the valve industry.

To be recognized as one of the world's most trusted and innovative manufacturer of fire

protection equipments by providing our customers highest quality products that combine

performance and advance technology with value pricing achieving 100% customer

satisfaction.

Continue to offer customers top quality products to meet or exceed customer's needs.

We focus on:

Customer service - Product quality - Product design - Delivery reliability.

For more than 20 years, FLOW-TEK VALVES & CONTROLS INC Control Valves has

maintained a family-like atmosphere in the workplace that goes hand in hand

with family values.Company founder Mr. K. B. Patel had a mission to produce a quality

product in a quality work environment.

Today his son Mr. Hemal Patel and Mr. Jatin Patel continue that mission and uphold

several important values both in the workplace and among their client base

FLOW-TEK VALVES & CONTROLS INC is dedicated to quality, as evidenced by their

ISO Quality System, UL Listings, IBR Approvals, NSIC registered, CE.

The company is also dedicated to continual improvement, as proven by their in-house

continual improvement department and constant pursuit of new industry approvals.

ISO 9001:2008 SSI CERTIFICATE

IBR APPROVAL

CE CERTIFICATE

NSIC CERTIFICATE

UL CERTIFICATE FOR DELUGE VALVE

IEC CERTIFICATE

QUALITY POLICY

FACTORY ACT LICENSE

FPAI CERTIFICATE

[email protected]

INDEX

1.

5.

6.

7.

8.

10.

12.

13.

16.

17.

18.

18.

19.

20.

21.

KNIFE EDGE GATE VALVES

BALL VALVES

GATE VALVES

GLOBE VALVES

NON-RETURN VALVES

BUTTERFLY VALVES

DIAPHRAGM VALVES

STRAINERS / FILTERS

PLUG VALVES

FLUSH BOTTOM VALVES

BLOW-DOWN VALVES

FOOT VALVES

PINCH VALVES

MOISTURE SEPARATOR

STEAM TRAP

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

SR. NO. VALVES NAME PAGE NO.


<;< 6BG881.H.64CGM.H,G.*,GH"38"BHKB"G.*,G!"4C.HOG3"!.G881.H.64G,"4G'K11GH.*,H4"CCG.CG46HGB"=K.B"!<

77< 93"H1F3"H1:6BG881.H.64CGM.H,G.*,GH"38"BHKB"G.*,G!"4C.HOG3"!.G881.H.64G,"4G'K11GH.*,H4"CCG.CG46HGB"=K.B"!

G"81"1"G!"C.*4GM.H,6KHG!.C34H1.4*H,"GL1L"<<

77G"'1"HCG H,"G 3"!.GMO G 'B63G4 O

.4H"B41G "N86C"!G 8BHCG 6'G H,"G L1L"CK,GCG*H"G*K.!"C GC"H G"H;G.''"B"4HG HO8"CG 6'G 3H"B.1GL. 11"

CK,GCG GI7EGCH.41"CC G 7( G.-B! G"H;"

GH6G'"G!.3"4C.64G.4B"C"GGG(QGH6GGJ(QGGGG&GGG533GIQQGH6GGEQQGG &G7J33B

*"BG!.3"H"BCG64GB"=K"CH;

7 7<GH4 <<!B!GB"C.1."4HGC"H;G

"38"BHKB"G1.3.HH.64CG6B!.4*GH6C"HG3H"B.1GC"1"H"!;64CK1HGH,"

6L"G,BHG6BG6KBGH",4.1G!"8BH3"4H'6BG36B"G.4'6B3H.64;G"

81"1"GC"HGB"H.4"BGB.4*;<

77< <9B"C.1."4H:G"38"BHKB"G1.3.HH.64CG6B!.4*GH6

C"HG3H"B.1GC"1"H"!;G64CK1HGH,"6L"G,BHG6BG6KBGH",4.1G!"8BH3"4H

'6BG36B"G.4'6B3H.64;G"81"1"G4!GB".4'6B"!GC"HGB.4*

L.11"G.4G!.''"B"4HG3H"B.1CGCK,GCCH.41"CCGCH""1 G 7( G.GB! $

“Flow-Tek” can offer MSS SP-81 applies to bonnet less metal seated Knife

Edge Gate Valves, 2” To 24” size, 150 psi CWP, Sizes above 24” are not covered

under this standard. Additionally, resilient seated Knife Edge Gage Valves and

Slide Knife Edge Gate Valves are also not covered under MSS SP-81. These

products are subject to the individual manufacturer's internal testing & design

standard.

KNIFE EDGE GATE VALVE

“Flow-Tek” Knife Edge Gate Valve are designed for Isolation, On-Off and Throttling services in Paper and Pulp Industries, Power

Plants, Steel Plants, Cement Plants, Sugar Industries, Chemical and Textile Processing Industries, Mining, Food & Beverages, Bulk

Handling, Water and sewage Plants to handle Slurries, Slag, Pulp and Fibrous Materials, Fly Ash, Powders, Clean or Corrosive gases.

“Flow-Tek” product Knife Edge Gate Valves can be operated by Hand wheel (rising & non-rising stem), Lever also available

automated with Bevel Gear, Electric or Pneumatic Actuator for remote operation, Chain Wheels or Floor Stands can be used for

inaccessible areas. When needed, Lock-Out Devices can be provided to prevent accidental opening or closing of the valve. All

automated valves can be also provided accessories like Mechanical Stop Switches, Proximity Switches, Manual Override, Positioners,

Extended Stem and Solenoid Valves.

OVER VIEW

DESIGN & TESTING:

VALVE SIZE

2"

2.5"

3"

4"

5"

6"

8"

10"

12"

14"

16"

18"

20"

24"

26"

28"

30"

36"

40"

150 # F TO F

48

51

51

51

57

57

70

70

76

76

89

89

114

114

117.34

117.34

117.34

117.34

127

FACE TO FACE

Sizes: DN 32 (1.25”) to DN 1200 (48”)

(larger diameter on request)

TECHNICAL INFORMATIOAN:

50 mm

300 mm

450 mm

500 mm

700 mm

to

to 400 mm

to 600 mm

to 1200 mm

250 mm = 140 psi

= 85 psi

= 70 psi

= 50 psi

= 30 psi

MAXIMUM WORKING PRESSURE:

Face to face dimension increase: DN 50 to DN 250 X = 9mm

DN 300 to DN 600 X = 12mm

Larger diameters on request

MSS SP-81 has specified Face to Face dimensions and tolerances for each

valve size to assure ease of installation for the consumer, regardless of the

valve manufacturer

[email protected]

KNIFE EDGE GATE VALVEKNIFE EDGE GATE VALVE

SELECTION CHARTS FOR SEAT / SEALS & PACKING

>482

248

248

392

482

482

High Temp. Low Tightness

A cids and non-mineral oils

Resistance to petroleum products

General chemical service, High Temperature

Food Service / High Temperature

Corrosion Resistance

MATERIAL APPLICATIONSMAX. OTEMP. ( F)

Note: More details and other materials under request

TEMPERATURE CHARTS / PACKING

MATERIAL

PTFE Impregnate,

System, Fiber

Braided PTFE

Graphited Asbestor

0MAX. TEMP. ( F)

464

500

1112

pH

2 - 13

0 - 14

0 - 14

F/F F/F

NUT & BOLT

BODY

CLAMPING RING

PLATE

SEAT RING

CLAMPING RING SCREW

GLAND PACKING

GLAND

PATA

SPINDLE

BLOCK

SPINDLE NUT

WHEEL

WHEEL NUT

BLOCK NUT

CONNECTOR BOLT

BI-DIRECTIONAL DESIGN UNI-DIRECTIONAL DESIGN

STANDARD PART DETAILS

“Flow-Tek” Knife Edge Gate valves available designs are in Uni-Directional, Bi-Directional, “V” Notch Type & Square /

Rectangular Type designs & also as per client requirement tailor-made design.

MSS SP-81 requires the valve body (pressure vessel and related structure) to be designed for and hydrostatically pressure

tested to 1.5 times the rated working pressure.

*Valve rated pressure – 150 psi

*Body test pressure – 225 psi

MSS SP-81 requires the gate to be designed for and hydrostatically pressure tested to 1.1 times the rated working pressure.

*Valve rated pressure – 150 psi

*Gate test pressure – 225 psi

MSS SP-81 has an allowable leakage rate (for metal to metal seated valves) of 40 cc per inch of diameter, per minute at 40

psi pressure. On a 12” valve this would be equal to 40 times 12, or 480 cc per minute at 40 psi. Maximum allowable leakage

of 06 GPM when tested with water at 40 psi applied in the normal flow direction. No visible leakage when tested with water

at 40 psi (for soft seated valves only.)

Body:

Type :

Gate:

Seat:

Metal / Metal

EPDM (E)

Nitrile (N)

Viton (V)

Silicon (S)

PTFE (T)



Full Port Bi-Directional Shutoff

Hardened Beveled gate and hardened seat for shearing and sealing

Close tolerance machining between bodies

Precision ground gate chrome plated

Removable insert ring for ease of repair

Two piece cavity free body eliminates jamming

Four post stainless steel stanchions

Live loaded Teflon packing

Adjustable stainless steel packing gland

High Performance cylinder with safety lock-out system and limit switch brackets

Sizes range from 2” To 24” (inquire for larger sizes)

Typical applications: OCC recycle, lime mud, liquors, plastics, polymers,

cement powder and other slurry and abrasive services

Full port confirms to MSSP SP-81

Face To Face confirms to MSSP SP-81

Flange ends meet Standard Flange connection: DIN PN 10 and ANSI B 16.5 (Class 150)

FEATURES

METAL / METALFor applications with:• High temperature• High density media application• When full tightness is not required

TYPE "B" SEAT (metal/metal)For applications with:• High temperature• High density media application• When full tightness is not required• Replaceable design without dismantlingthe valve

DEFLECTION CONE "C"• Deflects the media away from anyinternal exposed parts of the valvesuch as gate guides, seat, etc.• Different types of material availablesuch as AISI 316 stainless, CA15, Ni-Hard, etc.

RESILIENT, TYPE "A" • Standard resilient seat.• Temperature limitations according toseat material selected. Consult theabove chart or our technical departmentfor more information.• Replaceable seat retainer ring.

TYPE "B" SEAT (resilient)• Temperature limitations according toseat material selected. Consult theabove chart or our technical departmentfor more information.• Replaceable and reinforced seat ringavailable in different materials such as:stainless steel, CA15, Ni Hard,…

SEAT TYPES

“V” NOTCH TYPE SQUAR TYPE PURGING SYSTEM

[email protected]

4www.flowtekvalves.com

AVAILABLE ACCESSORIES FOR OPERATIONS:

HAND WHEEL

CHAIN WHEEL

FABRICATED LEVER

WORM GEAR

BEVEL GEAR

DOUBLE ACTING

SINGLE ACTING (SPRING RETURN)

DOUBLE ACTING


DOUBLE ACTING

SINGLE ACTING

1 PHASE

3 PHASE

LEVER (ROLLER) TYPE

3X2 WAY, 5X2 WAY

NORMAL, WEATHER PROOF, FLAME PROOF

LINEAR TYPE

LINEAR TYPE

SMART (HEART) TYPE / LINEAR TYPE

TYPEACCESSORIES:

WHEEL

LEVER

GEAR BOX

PNEUMATIC CYLINDER

PNEUMATIC CYLINDER WITH MANUAL OVERRIDE

HYDRAULIC CYLINDER

ELECTRICAL ACTUATOR

LIMIT SWITCH

SOLENOID VALVE

SOLENOID VALVE COIL

VALVE POSITIONER

I/P CONVERTER

ELECTRO PNEUMATIC VALVE POSITIONER


BALL VALVE

“Flow-Tek” Valves & Controls manufactures high performance Quarter-Turn Ball Valve, widely use in the Process Industries.

These Valves are basically Soft Seated, gives 100% Leak Proof tight shut off at Temperature ranging from - 20°c to 200°c.

The Valves are provided with Self Lubricated & Replaceable PTFE Moulded Seat & Mirror finished polished Stainless Steel Ball,

Reduces Friction which gives very smooth operation, So the valves becomes free from maintenance gives the long life.

OVER VIEW

DESIGN TYPE

SIZE RANGE

STRUCTURE

MATERIAL

1 Piece / 2 Piece / 3 Piece / Multiport Ball Valve

15mm (1/2") to 300mm (12") (Higher size - contact to us.)

End Connection Flanged End / Screwed End (BSP/NPT) F / Socket Weld / RTJ

Operation Manual Hand Lever / Gear / Electrical Actuator, Pneumatic

Shell CI, WCB, CF8, CF8M, CF3, …more material on request available

Trim 13% Cr Steel, 304 , 304L, 316, 316L, 321, 347, F51, Monel

Design Standard

Testing Standard

Face To Face

End Connection

Pressure – Temperature Chart

Fire Safe

BS 5351 / API 6D / API 608 / ISO 10434 / ISO 14313

API 598 / API 6D / BS 5146

ASME B 16.10

Flanged End - ASME B 16.5

Butt Weld End – ASME B 16.25

ASME B 16.34

API 607

Design Standard

Testing Standard

Face To Face

End Connection


Fire Safe

BS 5351 / API 6D / API 608 / ISO 10434 / ISO 14313

API 598 / API 6D / BS 5146

ASME B 16.10

Flanged End - ASME B 16.5, Socket End - ASTM B 16.11

Butt Weld End - ASME B 16.25, Screwed End - ASTM B 16.11

ASME B 16.34

API 607

TYPE OF BALL VALVES

Trunion-Mounted Ball Valves for High Pressure

Double Block and Bleed Ball Valves

Lined Ball Valves

Power Actuated Ball Valves

Rising Stem Ball Valves

Three Piece Floating Ball Valve

Flanged Floating Ball Valve

Multiports - 3-way, 4-way, ‘T’, ‘L’ Port available

Flexible lip seats compensate for wear and changes in pressure

Valve available in single piece, 2 piece and 3 piece design, with floating ball

Blow out proof stem construction

Antistatic devices ensure electrical continuity between ball, stem & body

Triple stem sealing

Simplified gear/actuator mounting

Extended stem Ball Valve

Partial / Full Jacketed Ball Valve

Flow Pats Diagram for Multiport Valves

FEATURES

TECHNICAL DETAILS

APPLICABLE STANDARD

[email protected]

TECHNICAL DETAILS

DESIGN TYPE

SIZE RANGE

STRUCTURE

MATERIAL

RISING / NON RISING AND IN ANY OTHER ALLOY STEEL

15 mm (1/2") to 600mm (24")

End Connection Flanged End Raised Face, screwed end, Butt Weld End, RTJ,. ETC

Operation Hand wheel, Gear Operator, Electrical Actuator, Pneumatic, Hydraulic

Body WCB, CF8, CF8M…more material on request available


API 600 / BS1414 / BS5352

API 598 / BS EN 12266-1

ASME B 16.10



ASME B 16.34

Design Standard

Testing Standard

Face To Face

End Connection


APPLICABLE STANDARD

“Flow-Tek” offer Gate Valve with Pneumatic / Electrically (Motorized) / Gear Operation with Limit Switches and suit specific requirements.Extended Bonnets with sufficient gas column length, usually specified by customer, are supplied for all valves to keep stem packing at sufficient distance away from the cold fluid to remain functional.

FEATURES

“Flow-Tek” High Pressure Gate Valve offer high performance, reliability and safety. The Gate Valve are especially suitable for high

pressure and high temperature application in steam, oil and gas processing, power industries, in chemical and petrochemical industries.

“Flow-Tek” can offer a series of Gate Valve are heavy duty Outside Screwed & Yoke Type bolted bonnet, rising stem with non rising

hand wheel. Straight through bore design assures minimum turbulence, erosion and resistance to flow. The most advance design futures

provides the ultimate in dependable, economic flow control they are available in wide range of sizes and weights. These are widely suited

for high pressure and temperature and variety of fluids. All the valves are manufacturing as per international Design and standards to get

the Total Interchangeable, Finest Quality and Workmanship.

Double flanged / butt weld end, outside crew rising

stem, yoke type bonnet.

Back seating bush arrangement to enable

repacking under pressure.

Rigid and sturdy design.

Low pressure loss across the valve.

Long service life and leak tightness.

CAST STEEL GATE VALVE

Outside screw and yoke type bolted bonnet

construction.


Long service life with leak tightness.

Back seating surfaces provided integral to bonnet.

Ends - socket weld able / screwed.

FORGED STEEL GATE VALVE

GATE VALVE

Valves can be supplied with actuator, pad lock and other accessories like limit switch, position indicator, and solenoid valve as per

requirement.

Stem extension, underground service features are available.

Design standard up to 24" is API 600 and above 24" is BS 1414.

NOTE:

OVER VIEW


DESIGN TYPE

SIZE RANGE

STRUCTURE

MATERIAL

Forged Steel / Cast Steel Globe Valve And in any other ALLOY STEEL

15mm (1/2") to 600mm (24")

End Connection Flanged End Raised Face, screwed end, Butt Weld End, RTJ,. ETC


Body WCB, LCB,CF8, CF8M, Hastelloy, Inconel, Duplex Stainless Steel,

Forge A105, F11, F22 …more material on request available


Design Standard

Testing Standard

Face To Face

End Connection


API 602 / API 6D / BS 1873 / BS 6464 / BS 5352

API 598 / API 6D

ASME B 16.10 / DIN STD.



ASME B 16.34

Valves can be supplied with actuator, pad lock and other accessories like limit switch, position indicator, and solenoid valve as

perrequirement.


NOTE:

“Flow-Tek” High Pressure Globe Valve offer high performance, reliability and safety. The Globe Valve are especially suitable for

high pressure and high temperature application in steam, oil and gas processing, power industries, in chemical and petrochemical

industries. “Flow-Tek” can offer a series of Globe Valve are heavy duty Outside Screwed & Yoke Type bolted bonnet, rising stem with hand

wheel. Globe valves are highly efficient for services requiring frequent operation and throttling. The internal passage within the valve

diverts flow through 90o changes of direction resulting in pressure drop and turbulence. The most advanced design features provides the

ultimate in dependable, economic flow control. They are available in wide range of sizes and weights, Globe Valves are generally where

moderate control or regulation of flow is required.

All the valves are manufacturing as per international Design and standards to get the Total Interchangeable, Finest Quality and

Workmanship.

GLOBE VALVE

“Flow-Tek” offer Globe Valve equipped with Pneumatic Actuator, Electrically (Motorized) Actuator, Pneumatic Cylinder Operation

along with accessories like solenoid, Limit Switches, Manual Override in Two Way & Three Way Design to get an extra edge for your

specific application. Extended Bonnets with sufficient gas column length, usually specified by customer, are supplied for all valves to

keep stem packing at sufficient distance away from the cold fluid to remain functional.

FEATURES

OVER VIEW

FORGED STEEL GATE VALVE

Outside screw and yoke type bolted bonnet construction.


Long service life with leak tightness.

Back seating surfaces provided integral to bonnet.

Ends - socket weld able / screwed.

CAST STEEL GATE VALVE

Double flanged / butt weld end, outside screw

rising stem, yoke type bonnet

Back seating bush arrangement to enable

repacking under pressure

Rigid and sturdy design

Long service life

TECHNICAL DETAILS

APPLICABLE STANDARD

[email protected]

NON RETURN VALVE

“Flow-Tek” Valves & Controls - Manufacturer Of industrial valves offers conventional Check Valves / Non Return Valves

ideally suitable for both Vertical & Horizontal Application.

OVER VIEW

DESIGN TYPE

STRUCTURE

MATERIAL

Swing Type Check Valve / Wafer Type Check Valve / Non Slam Disc Type

Check Valve / Dual Plate Check Valve/ Lift Check Valve / Ball Check Valve

Type Check Valve.

End Connection Flanged End / Socket Weld End, Buttweld End

Body CI, S.G.IRON , WCB, CF8, CF8M, CF3, CF3M …more material on

request available


TECHNICAL DETAILS

SWING TYPE CHECK VALVE:-

“Flow-Tek” Swing Type Check Valves are heavy duty, bolted cover, renewable seat ring, and body mounted disc swing type.

Valves are straight through flow which works automatically. They are opened by the force of velocity pressure closed by the force of

gravity and back pressure. The valves are single direction flow and restrains flow in opposite direction. Distortion, wear and noisy

operation of the valve can be avoided by selecting the size of the basis of flow conditions.

“Flow-Tek” Dual Plate Check Valves developed by us consists of a wafer type Body, Plates equipped with inlayed seal in dove tail

groove on body seat, corrosion spring and pin provided internally. The valve is so compact, that the face to face may be reduced to about

25% and weight to about 20% when compared to convention Swing Type Check Valves, which are not only bulky, expensive and difficult

to maintain, but also less durable.


Workmanship.

DUAL PLATE CHECK VALVE

SWING CHECK VALVE - APPLICABLE STANDARD:

Design Standard

Testing Standard

End Connection


API 6D / BS 1868

API 598 / API 6D, BS EN 12266-1

Flanged End - ASME B 16.5,

Buttweld End - ASME B 16.25,

ASME B 16.34

Design Standard

Testing Standard


API 6D / API 594

API 598 / API 6D

ASME B 16.34

DUAL PLATE CHECK VALVE - APPLICABLE STANDARD:


NON RETURN VALVE

LIFT CHECK VALVE - APPLICABLE STANDARD:

Design Standard

Testing Standard

End Connection


BS 5352

API 598 / BS 5146

ASME B 16.34


Socket End - ASTM B 16.11

Butt Weld End - ASME B 16.25,

Screwed End - ASTM B 16.11

DISC TYPE CHECK VALVE (NON-SLAM CHECK VALVE / SINGLE DISC CHECK VALVE)

“Flow-Tek” Disc Type Check Valve is spring loaded normally closed. The center guided disc is spring loaded. The once patented

feature that results in silent shut off is the relation of the disc to the seat when in the open position. This distance is approximately ¼ of the

valve size. It is the short disc travel distance coupled with the spring force that results in silent shut-off.

“Flow-Tek” makes wafer design Disc Type Check Valve utilizes for wide range of applications. Wafer check valve approaches the

best pressure drop performance available in any check valves on the market. Compact design wafer type check valves are for silent

operations in essential. Wafer check valves are suitable to install in any position between ANSI 150# and 300# flanges

Design Standard

Testing Standard


DIN 3230

API 598

ASME B 16.34

DISC CHECK VALVE - APPLICABLE STANDARD:

LIFT TYPE CHECK VALVE:

“Flow-Tek” make Forged Steel Lift Type Check Valves are available with bolted covers having spiral wound gaskets made of

Stainless Steel/graphite. The check valves are available in Piston Check or Swing Check valve designs.

“Flow-Tek” make short face to face dimensions and the low weight guarantee a simple and space saving installation between bolts

of connecting flanges.

WAFER TYPE CHECK VALVE:

FEATURES

Compact Design

Short Face To Face

Low Weight, Lowest Cost

Lower Pressure Drops one Valve

For 150# or 300# Mounting

Easy Installation

Silent In any Position Size : ½” To 4” For 150# or 300# Mounting

Swing Type, Anti-Rotation Disc

Renewable Seat Rings

Non-Penetrate Disc Shaft

Horizontal or Vertical Service

[email protected]

BUTTERFLY VALVE

“Flow-Tek” Butterfly Valve make an excellent choice by combining the balance of an economical valve with the

performance you expect in a commercial. The wafer style body has universal design to fit between pipe flanges of

almost all popular flange standards, also available with Flanged End connection.

OVER VIEW

DOUBLE / TRIPLE ECCENTRIC OFFSET

TECHNICAL DETAILS

DESIGN TYPE

SIZE RANGE

STRUCTURE

MATERIAL

TEMPERATURE

PRESSURE RATINGS

Offset Disc / Double Eccentric / Triple Eccentric Butterfly Valve

65 mm (2-1/2”) to 1500 mm (60") – Larger sizes on request

End Connection - Wafer Type, Lug Type, Etc.

Body Carbon Steel, Stainless Steel, Nickel Aluminum Bronze …Etc.

Disc Stainless Steel, Nickel Aluminum Bronze

Seat Standard - RTFE with Resilient Energizer, PTFE with Resilient Energizer

Fire Safe - RTFE and Inconel with Resilient Energizer

Stem Stainless Steel, Monel K500

-20°F to 500°F (-29°C to 260°C)

ASME Class 150, 300 and 600

DESIGN TYPE

SIZE RANGE

STRUCTURE

MATERIAL

TEMPERATURE

PRESSURE RATINGS

Center Disc

25 mm (1”) to 500 mm (20") – Larger sizes on request

End Connection - Wafer Type, Lug Type, Etc.

Body CI, Ductile Iron, Stainless Steel, Aluminum …more material on request available

Trim Stainless Steel, EPDM Molded over SS, BUNA-N Molded over SS Seat

Seat BUNA-N, EPDM, PTFE Lined, FKM* Polyurethane

-20°F to 400°F (-29°C to 204°C)

Bidirectional Bubble-tight Shutoff

CENTER DISC VALVE

TECHNICAL DETAILS

TYPE OF BUTTERFLY VALVES

Center Disc :- Rubber and PTFE Seated

Offset Disc (Double eccentric Type)

Rubber Seated

PTFE Seated

SEAT TEMPERATURE RATINGS:

(For Resilient Seated Butterfly Valves)

MATERIAL

EPDM

PTFE

BUNA-N

NEOPRENE

HYPALON

VITON

PTFE

O OTEMPERATURE RATINGS C ( F)

-34 To 107 (-30 to 225)

4 To 121 (40 to 250)

-12 to 82 (10 to 180)

-6 to 93 (20 to 200)

-17 to 135 (0 to 275)

-12 to 135 (10 to 275)

18 TO 200 ( 0 TO 392)


AVAILABLE ACCESSORIES FOR OPERATIONS:

[email protected]

BUTTERFLY VALVE

APPLICABLE STANDARD

Design Standard

Testing Standard

Face To Face

End Connection


BS 5155 / API 609 -CAT-“A” AND CAT-“B”/ IS 13095

BS 5155 / BS 6755 P-I / API 589 / IS 13095

BS 5155 / API 609 / IS 13095 (Wafer Short)

Wafer type suitable to mount between Flanged

End - ASME B 16.5

ASME B 16.34

Longer Life

Tight Sealing, and Consistent Low Torque

Assured Shaft Sealing

Lower Resistance to Flow - Disc design

Ease of Installation

One-piece blowout-proof Shaft

Reliable Drive

FEATURES

ACCESSORIES

WHEEL

LEVER

GEAR BOX

PNEUMATIC CYLINDER

PNEUMATIC CYLINDER WITH MANUAL

OVERRIDE

HYDRAULIC CYLINDER

ELECTRICAL ACTUATOR

LIMIT SWITCH

SOLENOID VALVE

SOLENOID VALVE COIL

VALVE POSITIONER

I/P CONVERTER

ELECTRO PNEUMATIC VALVE POSITIONER

PNEUMATIC ACTUATOR

TYPE

HAND WHEEL

CHAIN WHEEL

FABRICATED LEVER

WORM GEAR

BEVEL GEAR

DOUBLE ACTING


DOUBLE ACTING


SINGLE ACTING

DOUBLE ACTING

1 PHASE

3 PHASE

ROTARY TYPE

3X2 WAY, 5X2 WAY

NORMAL WEATHER PROOF, FLAME PROOF

SMART (HERT) TYPE /

ROTARY TYPE

ROTARY TYPE

ROTARY TYPE

SINGLE ACTING

DOUBLE ACTING

Valves can be supplied with actuator, pad lock and other accessories like limit switch, position indicator, and

solenoid valve as per requirement.


NOTE:

FEATURES

Housing: WCB Steel, Stainless Steel with epoxy coated.

Diaphragm: PTFE diaphragm with NBR backing cushion.

Nominal Diameter: DN 15 to 250 mm.

Temperature range: -80~200 oC

Pressure: 0.6, 1.0, 1.6 MPa.

Connection: Flange (DIN or ANSI Class 150 & Class 300).

Inspection: 20 KV Spark Testing.

“Flow-Tek" PTFE Lined Diaphragm Valve. We have attained the maximum satisfaction of our clients by offering an superior array

of PTFE Lined Diaphragm Valve to our esteemed clients. Highly suitable for various corrosive and abrasive applications, our

valves are designed to suit the needs of various chemical and pharmaceutical industries. We manufacture PTFE Lined Diaphragm

Valve by using optimum grade of materials and advance technology at our state of art machining facility. Durability, compact design

and superior functionality are some of the characteristics of our valves. FEP Coating :- Upto Temperature 195° , PFA Coating:- Upto

Temperature 260°

PTFE LINED VALVE

“Flow-Tek” Diaphragm Valves have been developed to satisfy market demand for a valve to handle sludge, slurries and give high

flow performance with minimum turbulence, while giving 100% leak tight closure. A wide choice of materials, methods of operation and

body connections meet the needs of most industrial applications. Extended life, reliability, safety and ease of use, combined with

essentially simple design, result in low maintenance for minimum running costs. “Flow-Tek” straight through bore Diaphragm Valves (DN

15 To DN 350) positively benefit your company with a unique range of features.


Workmanship.

TYPE OF DIAPHRAGM VALVE

PTFE LINED

RUBBER LINED

UN LINED

DIAPHRAGM VALVE

OVER VIEW

GRADE MATERIAL TYPICAL SERVICES

A

WA

N

E

B

WB

H

R

S

V

EP

T

Natural Rubber

White Natural Rubber

Neoprene

Ethylene Propylene

Black Butyl

White Butyl

Hypalon

Buna – N

Soft Natural Rubber

Viton

EPDM

PTFE (With Neoprene)

Water, Gases, Sewage, Slurry Sludge, Brine, Acids, Alkalis,

Salts

Pigments Pharmaceuticals

Weak Chemicals, Hot Compressed Air, Acids, Alkalis, Oils

Chemicals, Acids, Abrasives

Chemicals, Gases, Strong Acids, Chlorine

Foods, Beverages

Oxidizing Agents, Concentrated Sulphuric Acid,

Phosphoric Acid, Chlorine

Animal, Vegetable and Mineral Oils, Paraffin, Kerosene

Abrasive Fluids

Hydro Carbons, Strong Acids, Solvents, Chlorine

Radio Active Fluid, Chemical resistance similar to 'BG'

All Chemicals and Foods

-30

-10

-25

-30

-25

-25

-15

-10

-15

-25

-20

-30

80

80

95

150

120

105

105

80

80

165

110

175

OTEMP CMIN. MAX.

RUBBER LINED VALVE

Interchangeable, Finest Quality and Workmanship.

DIAPHRAGM MATERIALS AND CONFIGRATIONS

Design Standard

Testing Standard

Face To Face

End Connection


BS 5156

BS 5156

ASME B 16.10


ASME B 16.34

Screwed End - ASTM B 16.11

APPLICABLE STANDARD


“Flow-Tek” Strainers are typically used in applications where the amount of solids to be removed is small, and where

frequent clean-out is not required. They are most often installed in gaseous services such as steam, air, nitrogen, natural gas, etc.

The compact, cylindrical shape of the Y-strainer is very strong and can readily accommodate the high pressures that are common in

this type of service. Pressures up to 6000 psi are not unusual. When steam is being handled, high temperature can be an additional

complicating factor. A steam pressure of 1500 psi will often be found at temperatures of 1000°F.

Strainer has the advantage of being able to be installed in either a horizontal or vertical position. However, in both cases, the

screening element or "leg" must be on the "downside" of the strainer body so the entrapped solids can be properly collected and

held for disposal. Eaton heavy-duty Model 85 Y Strainers are furnished with high quality stainless steel screens that are carefully

fabricated to fit the strainer body perfectly. This, coupled with the precision machined screen seat on the body of the strainer,

protects against any bypass.

OVER VIEW

DESIGN TYPE

SIZE RANGE

STRUCTURE

MATERIAL

Y-Type Strainer / POT Type Strainer / Bucket Strainer / Duplex Strainer /

T-Type Strainer / Conical Type

15mm (1/2") to 600mm (24") **Higher size on request available

End Connection Flanged / Butt Weld / Screwed / Socket Weld. Etc.

Body WCB, LCB,CF8, CF8M, Hastelloy, Inconel, Duplex

Stainless Steel, …more material on request available


APPLICABLE STANDARD

Design Standard

Testing Standard

Face To Face

End Connection


MFG Standard

MFG Standard

ASME B 16.10

ASME B 16.34



TECHNICAL DETAILS

Y TYPE STRAINERS

“Flow-Tek” Y Type Strainers are one of the most common strainers present in the pipelines to handle small particles of dust. It is

suitable for removing the debris away from the pipeline in a systematic manner without causing any harm to the pipeline. As the

name highlights, Cast Y Type strainers are basically made up of cast steel. Apart from it, stainless steel or alloy steel acts as the

alternative for each other on several occasions. When it comes to dimensions of Cast Y Type strainers, its screwed ends/socket

weld ends is 0.5 inch to 2 inches whereas flanged ends/butt-weld ends ranges from 0.5 inch to 14 inches. Therefore, it has a

compact size that can fit various types of pipelines comfortably. Pressure rating of Cast Y Type strainers lies in between 150# and

1500#. This type of strainer is famous for its wall thickness which is as per API 600 and the ease of installation it renders due to

compact size and design.

ADVANTAGES

Low Cost

Low Weight

Compact

Effective Filtration Area

Debris are collected away from

the process stream

Blow Down purging of the debris

is possible in the middle of an

operation through the drain connection.

DISADVANTAGES

Limited Dirt Holding Capacity

Isolation of the process required

during the cleaning of the element

Available in casted, Forged, and Fabricated

STRAINER

[email protected]


“Flow-Tek” simplex basket strainer, fabricated simplex basket strainers have a basket shaped design with huge capacity of storing

debris. Made up of stainless steel or carbon steel, this type of strainers has a slant top basket design. The design helps the flow of

fluid technically because the slant top maintains low pressure drops. When it comes to the weight, fabricated simplex basket

strainers weigh lesser than other basket strainers. Due to low weight, labours find it easier to remove the slant top for cleaning

purposes.

A major turn on of this basket strainer is the optional presence of back -flush or backwash option. It works in a systematic way

without shutting down the system when there are heavy solid particles in the pipeline. An on/off back-flush valve is installed in the

strainer' bottom area and this opens when huge amount of debris gets accumulated at the bottom. Apart from back-flush, we also

offer various other modifications on basket strainers to provide the most suitable product to our clients.

SIMPLEX BASKET STRAINERS

DUPLEX BASKET STRAINERS :

“Flow-Tek” Duplex Basket strainer with three way ball valves is a member of the double basket strainers family. Like all the double basket

strainers, this strainer changes its basket when one gets heavy with the collected debris or dirt. It is, sometimes, called the advanced form

of double basket strainers because of the presence of 3 way ball valves. The valves are used to control the flow of fluids so that the

pressure can be maintained and the solid particles mixed with the fluid gets collected in the preferred basket

The three way ball valves can be controlled manually as well as electronically as per the convenience and preferences of our clients. We

offer various modifications in double basket strainers to meet the “blueprint” of our customers. The three way ball valves play a vital role in

connection of ports, however connection of all ports together at one point of time is not possible. The pressure is effectively maintained

between 150# and 300#.

DUPLEX STRAINER IS AVAILABLE WITH BUTTERFLY VALVES / WITH 3 WAY BALL VALVES

Straight through flow design

Low Pressure Loss

Slant top basket design

Basket perforations from 1/32”to 1”

20 to 400 mesh linings for fine straining

applications

FEATURES:

ANSI Class 150, 300, 600, 900, or 1500 flanges

Hinged cover or davit assembly for

easier maintenance

Alloy construction for body and baskets

RTJ-style connections

Vent valves

Drain valves

Gauge taps

Back-flushing system for manual or

automated cleaning

Pressure differential gauge and switches

Steam jacket for highly viscous fluids

Rotated or offset nozzle placement

High pressure capabilities

ASME Code construction

Brazilian NR-13 available

European standards - DIN/PED available

Coatings and linings available upon request

Also available in casted, fabricated.

OPTIONS:

STRAINER

[email protected]

ADVANTAGES

Quick Filtration

Easy to install

Low cost

Multiple designs available

DISADVANTAGES

Temporary in nature

Only suitable for start-ups

Ineffective in long term

Dynamic designs

Effective in initial stages

Made from perforates sheets and mesh lining

Pervasively applicable

Temporary application

FEATURES

304 stainless steel

316 stainless steel

OPTIONS:

“Flow-Tek”

Conical strainers are perfect examples of utility tools for new system start-up. These strainers are

shaped in the form a cone that tapers towards the end and provides a channel where by damage by

contamination can be ceased. Though temporary in use, this strainer acts as a filter for pipes before

they initially cleaned.

offers a wide variety of conical strainers, more commonly known as Temporary

Strainers, which are based on various designs and modern day technology. As inputs these strainers

are easily replaceable in a pipe and are considered ideal for escalating the flow in pipe joints. The

organization takes special care while manufacturing conical strainers by using perforated sheets

and mesh lining. Temporary pipes which are manufactured from our house acts as a symbol of trust

and quality for people as a result of which they have been constantly under great demand. The

variations start from NB 20.

CONICAL STRAINERS

T TYPE STRAINERS

“Flow-Tek” is one of the top contributors for Flanged end “T” type strainers in India. Quality control comes as an implied subject matter

here as they are produced using stainless steel that offers maximum resistance against daily wear and tear. The “T” type structure allows

these strainers to operate with greater efficiency as they are open to multiple outputs. These types of strainers are usually required for

diversification from a single source.

There are two distinct forms of “T” type strainers, namely, “T” type bucket flanged end strainers and mesh “T” type flanged end strainers.

ADVANTAGES

Custom made

Easy to install

Permanent fittings

Easy to maintain

DISADVANTAGES

Regular maintenance

Low effective filtering

Debris collection

Crafted from Stainless steel

“T” type flanged ends

Bottom plug for waste disposal

Protecting fluid handling systems

Hydraulic Test Pressure – 15kg/ cm^2

FEATURES

Size 2inch to 24inch

Pressure Class Range: 150 inch to 2500 inch

OPTIONS:

STRAINER


PLUG VALVE

Plug Valves are from high quality cast iron and cast carbon steel. "Flow-Tek" Plug Valves are 90 degree action from

open to close, protected seats, positive shut off, simple in line maintenance, minimum flow resistance, simple construction, and finally,

rugged construction ensuring long life.

“Flow-Tek" Plug valves can be operated manually by wrench, Hand wheel through gear box, or quarter-turn actuator drive

pneumatically or electrically. Our company is renowned as one amidst the reliable Plug Valves Manufacturers and Suppliers.

“Flow-Tek"

Plug Valves are Designed for high-performance and efficient operation. It uses silicon based grease for lubrication AND easily operates

at all pressures and temperatures while requiring only occasional lubrication. Low-torque operation results in the need for a less

expensive actuator and less maintenance.

Valves are also supplied with PTFE Sleeved And Materials Available In Cast Iron, Cast Steel, SS 304 & SS 316 Any Special

Material Required Please Contact Us.

OVER VIEW

DESIGN TYPE

SIZE RANGE

STRUCTURE

MATERIAL

Lubricated/Non-Lubricated Plug Valve/Eccentric Plug Valve/Expanding Plug Valve

15mm (1/2") to 300mm (12")

End Connection Screwed End / Flanged End / Butt Weld End BSP / BSPT/ NPT (F) /

Socket Weld Ends

Operation Hand wheel, Gear Operator, Electrical Actuator, Pneumatic

Shell CI, WCB, LCB,CF8, CF8M, Hastelloy, Inconel, Duplex

Stainless Steel, …more material on request available


TECHNICAL DETAILS

API 599/API 6D

API 598/API 6D

ASME B 16.10

ASME B 16.34



Design Standard

Testing Standard

Face To Face

End Connection


APPLICABLE STANDARD

FEATURES

Plug - heavy-duty fully rubber encapsulated

Welded nickel seat - robotically welded 1/8in thick

Grit-Guard shaft seals - prevents bearing wear and shaft seizing

V-type packing - self adjusting and replaceable while under pressure

Stainless steel radial upper and lower bearings - permanently lubricated for extended life

Upper and lower thrust bearings - to assure plug centering

Packing overload protection (Pop) Shims - ease of adjustment, extends packing life

Full access cover - allows inline maintenance

"Flow-Tek" offer Plug Valve in Jacketed Design, Trunion Mounted Design, Teflon Lined and Multi Port Designs with Pneumatic Actuator, Electrical Actuator and Pneumatic Cylinder operated along with extra accessories like Manual Gear, Solenoid and Limit Switches etc.

[email protected]

DESIGN TYPE

SIZE RANGE

STRUCTURE

MATERIAL

Y-Type Flush Bottom Valve / Angle Type Flush Bottom Valve / Ball Type Flush

Bottom Valve, Jacket Type Flush bottom valve ,

15mm (1/2") to 300mm (12")

End Connection Flanged End, Screwed End, Socket Weld End, Etc.

Operation Hand wheel, Gear Operator, Electrical Actuator, Pneumatic Actuator ,

with accessories

Body CI, S.G.IRON , WCB, CF8, CF8M, CF3, CF3M, …more

material on request available


TECHNICAL DETAILS

FLUSH BOTTOM VALVES

OVER VIEW

“Flow-Tek” Flush Bottom Tank Valves, widely used for discharging materials from processing tanks, are designed so as to

completely seal off the outlet nozzle at the inner vessel wall. This prevents solids from accumulating and solidifying in the outlet nozzle

neck and stopping discharge of the vessel contents. It also prevents the collection of un-reacted material in the nozzle.Flush Bottom Tank Valves have a modified 'Y' type body and Angel type design - with the stem being located in the vertical branch of the

valve. Seat and disc design is similar to that of a globe valve with metal to metal seating. The disc can lift up from the seat and open into

the vessel, or the disc can pull down from the seat and open into the valve.


Workmanship.

APPLICABLE STANDARD:

Design Standard

Testing Standard

End Connection


MFG Standard

MFG Standard


ASME B 16.34

FEATURES

“Flow-Tek” offer Flush bottom valve in Jacketed Design, Teflon Lined and inside tank Or inside valve opening depend upon the

design of vessel. With Pneumatic Actuator, Electrical Actuator and Pneumatic Cylinder operated along with extra accessories like

Manual Gear, Solenoid and Limit Switches etc.

Unique design of "Flow-Tek" flush bottom valves assure "Zero- Hold Up" in the bottom pad of the

tank. And facilitate the free flow and quick discharge of the liquid or slurry through the valves.

Casted and fabricated in all available metallurgy, Carbon Steel, S.S 304, S.S 316, S.S 304L, S.S

316L, Alloy 20, Hast alloy and as per special specifications.

Conical Metal to Metal disc seating/ PTFE seating with option of fixed or Renewable seat. Further

metal seating can be hard faced by Satellite TM where distortion of seat by aggressive liquid or

slurry is common.

Valves available in the size range of 15 NB to 250 NB in BS, ANSI & DIN standards.

Available in the design of Jacketed, Actuated & Lined.

Offered for Sanitary aseptic application

Outlet discharge angle available in 450and can also be tailored made to 600.

Flush Bottom vales can also be provided with the temperature sensors to measure

the temperature in the vessel

Bolted Stuffing Box (Gland), easily adjustable & with Replaceable service.

Rinsing & Non Rinsing stem with outside ACME thread.

End Connections - Screwed, flange, Socket weld, TCV joints etc.

"Flow-Tek"

BLOW-DOWN VALVE

“Flow-Tek” Boiler Blow Down Valves are based on ASME boiler and pressure vessel section 1 codes and ANSI B16.31 power

piping codes. Application include steam boiler blow down, surface blow down, water column drain, and shut-off, and stop valves stop

valves.

SIZE RANGE

STRUCTURE

MATERIAL

15 mm (1/2”) to 65 mm (2-1/2")

End Connection Flanged End

Body WCB, …more material on request available

Trim 13% Cr Steel, 304

TECHNICAL DETAILS

Available in Welded Bonnet for rating #300.

Available in Forgings of Carbon Steel (A105) / ASTN A 216 GR. WCB

Sizes upto 2-1/2” (10mm - 65mm).

End Connections Butt Weld, Socket Weld, Flanged End (ANSI /DIN)

available as standard. Special Flange connections offered against request.

Can be offered with Electrical Actuators.

Angle Pattern Design (Inlet and outlet at right angles to each other).

Offered with IBR Certificate Format III-C when offered for Steam Service.

Lever / Gear operated

Steam boiler application

FEATURES

OVER VIEW

"Flow-Tek" Foot valve is also known as swing type valve. These valves are designed with perfect flat seating for better sealing.

With a pressure rating of PN 0.2 these valves are widely used in suction side of pump to avoid flow reversal.

TYPE OF FOOT VALVES

PVC Foot Valves Valves

Bronze Foot Valves

Pedal Foot Valves

FEATURES

Rigid and sturdy design with minimum loss of head across the valve

Perfectly flat seating surfaces for good sealing

Preventing entry of foreign body to pump through suction pipe

Long service life

Manufacturing Standard IS 4038

Size Range 50 to 600 mm

Pressure Rating PN 2

Easy installation

Sturdy design

Precise dimensions

Rust resistance

Full Flow

FOOT VALVES

DESIGN

SIZE RANGE

STRUCTURE

MATERIAL

MFG Standard

25mm (1") to 600mm (24")

End Connection Flanged End, Screwed End.

Body CI, S.G.IRON , WCB, CF8, CF8M, CF3, CF3M

more material on request available

Trim Cr Steel, 304 , 304L, 316, 316L, 321, 347, F51, Monel13%

TECHNICAL DETAILS

OVER VIEW


[email protected]

PINCH VALVE

FEATURES

Straight Full Flow

No liquid hammering

Can handle most corrosive and abrasive material.

The only replaceable part is rubber sleeve.

Split casting ensures quick maintenance of the valve.

Design Standard

Testing Standard

Face To Face

End Connection


APPLICABLE STANDARD

API 599/API 6D

API 598/API 6D

ASME B 16.10



ASME B 16.34

“Flow-Tek” The pinch valve is particularly suited for applications of slurries or liquids with large amounts of suspended solids.

It seals by means of one or more flexible elements, such as a rubber tube, that can be pinched to shut off flow.

“Flow-Tek” make Pinch Valves offer a cost-effective solution to flow control problems. The secret is in the rubber sleeve - the

valve's only wetted part. Actuation of the valve, the pinching action, is accomplished by air or hydraulic pressure placed directly

on the elastomer sleeve. A rubber sleeve also known as rubber muff or tube is protected under a cast iron or aluminum body.

The inside of this rubber sleeve has no crevices or indentations to allow slurry compound to collect and dry into hard, sharp material.

Pinch valves resist clogging and are best suited for tough applications which clog in the pipeline. Pinch valves being glandless and

seat less with smooth interior construction lessen the chances of clogging considerably. Pinch valves can be operated by hand

wheels, pneumatic actuators, hydraulic actuators or electrical actuators.

Aluminum Body / Cast Iron, Pinch valves having Rubber Sleeves are extra heavy with full covering flanges preventing corrosion

on body and four reinforced pulling lugs for positive operation. The sleeve is internally completely reinforced.

OVER VIEW

SIZE RANGE

STRUCTURE

MATERIAL

25mm (1") to 300mm (12")

End Connection Flanged End Raised Face


Body CI ,WCB, LCB,CF8, CF8M, Duplex Stainless Steel, …more

material on request available


TECHNICAL DETAILS


FEATURES

To remove suspended water particles from steam line and supply

dry steam to equipment increasing their operational efficiency.

High efficiency removes up to 95% of moisture particles.

Dry steam increases process equipment efficiency.

Thoroughly engineered design ensures maximum dryness fraction.

Wide variety of sizes.

Internals designed for minimum re-entrainment.

Easily Removable Filtering Element

Adequate Strength

Removing Particles, Lumps, Debris Etc.

Heavy Gauge Baskets

Large Basket Holds sufficient Solids

Dimension can be modified to suit customer requirements.

Notes: Available with IBR test certificate

MOISTURE SEPARATOR

“Flow-Tek" Moisture in steam blocks heat transfer. In compressed air, it fouls your application. Moisture separators are a

simple and effective way to improve both your processes. Installation upstream of pressure reducing valves and steam meters

ensures accuracy and a long mechanical life.

It s always advisable to use steam with the maximum possible dryness fraction. Wet steam is a causeofmanyproblems including

corrosion, water hammer etc. Wet steam can also damage costly equipment like flow meters, control valves etc.

“Flow-Tek” moisture separators effectively remove the moisture from steam ensuring the highest dryness fraction at the outlet.

These moisture separators are available with IBR test certifications if required.

“Flow-Tek” offers a wide range of moisture separators in different materials and a large variety of sizes. Thorough engineering

and precise manufacturing ensure complete removal of entrained moisture particles. Moisture separators can be cast or fabricate

as required.

“Flow-Tek” Moisture Separator is a carbon steel baffle type separator used for the removal of entrained liquids in steam, so that

they can be drained away as condensate.

TECHNICAL DETAILS

DESIGN TYPE

SIZE RANGE

STRUCTURE

MATERIAL

T-Type Moisture Separator

25mm (1") to 200mm (8")

End Connection Flanged End.

Body CI, S.G.IRON , WCB, CF8, CF8M, CF3, CF3M, .......

more material on request available


APPLICABLE STANDARD

Design Standard

Testing Standard

End Connection


MFG Standard

API 598


ASME B 16.34

OVER VIEW

[email protected]

INVERTED BUCKET STEAM TRAPS

In different body materials depending upon the pressure range - C.I., Cast

Steel, Forge Steel or Alloy Steel.In Vertical or Horizontal execution.

In ½”, ¾”, 1”, 1 ½”, or 2” sizes.

IBR approved or Non- IBR.

Quality controlled sensitive components like lever, valve, valve seat, etc.

made to ensure optimum operational value.

Very economical as performs for long periods of time with minimum attention.

Each size of “Flow-Tek” inverted bucket steam trap is available with different

Valve seat Assemblies at different pressure intervals so that the capacity of

any- one size is maintained at its optimum level.

Suitable for pressure up to 200 psi. The series IB3, IB6 and IB9 Vertical Traps

are suitable for pressure up to 300 psi, 600 psi and 900 psi respectively.

In quality and performance, equivalent to the best known and yet

economically priced.

Spares readily available.

All spares and even a trap as a whole, fully interchangeable with known

makes.

Approved and in run by various industries throughout the country.

Can offer also Auto Drain Traps

BALL FLOAT STEAM TRAPS

In C.I., Cast Steel, etc. body material.

In different piping configuration - Vertical and Horizontal - permits flexibility in

employing the right Trap to meet with specific needs.

In sizes - 15, 20, 25, 40 and 50 mm.

Having big discharge capacities for their size, they handle high starting loads

and low running loads equally well and also take pressure fluctuations. They

continuously discharge condensate as it forms.

Choice of Threaded and Flanged Ends in Cast Iron and Cast Steel body

materials and Socket Weld Ends in Cast Steel construction.

Steam Lock Release (SLR) incorporated as a standard feature.

The float and other internals are of Stainless Steel.

Cover removable both in Horizontal and Vertical type for in-line maintenance.

Pressure range up to 14 bar for BF 10 & BF 11 Series and up to 32 bar for BF

20 & BF 21 Series.

All spares fully interchangeable with known makes.

Can offer also Auto Drain Traps

CONTROLLED DISC STEAM TRAPS ( THERMODYNAMIC)

MODEL – CD3; ½” & ¾” Size.

IBR approved or Non-IBR.

Are generally used on low pressure steam lines.

Being very compact, ensure minimum loss of energy through radiation from

the trap body.

Have only one moving part-a hardened Stainless Steel disc - thus requiring

minimum of maintenance.

Are of Stainless Steel construction so as to withstand thermal shock.

Available having screwed or socket weld connection ends.

All spares fully interchangeable with known makes.

Model CDR3 with exclusive feature of renewable seat is also available.

STEAM TRAPS


APLICATION

BALL VALVE

OVER VIEW

Suitable for wide range of working conditions of pressure and

temperature ratings.

Wastewater treatment plants

Chemical plants

Food and Beverage

Oil refineries.

Water, steam, air, gas and liquids having corrosive properties.


Process Chemicals

Pharmaceuticals

Refineries and Petrochemicals Plants

Paper and Sugar Plants

Drilling Rig

GATE VALVE

Oil refineries.


Refineries and Petrochemical Industries.

Fertilizer Plant.

Thermal Power Plant.

Other Process Industries.

GLOBE VALVE

Refineries and petrochemical Industries.

Fertilizer Plant.



NON RETURN VALVE

Chemicals Industries

Pharmaceuticals

Refineries and Petrochemicals Plants

Paper and Sugar Plants

Drilling Rig

Oil refineries.


Refineries and petrochemical Industries.

Fertilizer Plant.



BUTTERFLY VALVE

Chemical Industries

Fossil Power Plants

Pharmaceutical

Mining

Nuclear Power Plants

Water treatments...

DIAPHRAGM VALVE

OVER VIEW

Thermal Refineries

Fertilizers

Chemical

Pharmaceutical

Water

Steam industries

Petrochemical, Power, Energy

PLUG VALVE

OVER VIEW

Process Industries, Pharmaceutical

Bio And Food Grad Products

Fertilizer, Resin

Chemicals or other Abrasive

Corrosive Slurry

FLUSH BOTTOM VALVES

OVER VIEW

Steam boiler

BLOW-DOWN VALVE

OVER VIEW

Used in suction side of pump to avoid flow

reversal from pump to sump with

monoblock pumps

FOOT VALVE

OVER VIEW

Wastewater (effluent)

Iron

Cement

Caustic

Lime

Sand

Chemicals or other abrasive

Corrosive slurry

Liquid with solid suspensions and many others media

which are difficult to handle with seat valve.

PINCH VALVE

OVER VIEW

STEAM APPLICATION

MOISTURE SEPARATOR

OVER VIEW

Steam Distribution Piping

Steam-heated Equipment

Tracer Lines

Power-drive Equipment

STEAM TRAP

Chemical processing, Petroleum

Power generation, Marine, Water

Oil & Gas, Offshore, Iron & Steel, Automotive

HVAC, Pulp & Paper

Food & Beverage

Pharmaceutical

STRAINERS / FILTERS

C L I E N T S L I S T

[email protected]

Plot No. 172-173, Road - 4, G.I.D.C., Kathwada,Ahmedabad - 382 430. Gujarat, India.Phone : 079-2290 0219, 2290 0220.Mobile : +91 98240 80899, 98245 39702, 97251 04304E-mail : [email protected] / [email protected] : www.flowtekvalves.com, www.delugecontrolvalve.com

RANGE OF PRODUCT

DELUGE VALVES AND SKID - UL LISTED

AUTOMATIC CONTROL VALVES

PNEUMATIC CONTROL VALVES

DIGITAL CONTROL VALVE

PRESSURE REDUCING VALVES

SAFETY VALVES & THERMAL RELIEF VALVE

PRESSURE REDUCING STATION AND

DESUPERHEATERS

AUTOMATION VALVES

KNIFE EDGE GATE VALVES

BALL VALVES

GATE VALVES

GLOBE VALVES

NON-RETURN VALVES

DIAPHRAGM VALVES

BUTTERFLY VALVES

STRAINERS / FILTERS

FLUSH BOTTOM VALVES

BLOW-DOWN VALVES

PLUG VALVES

FOOT VALVES

PINCH VALVES

MOISTURE SEPARATOR

STEAM TRAPE

RUBBER AND PTFE LINED VALVES

AND MANY MORE ON REQUEST

INDUSTRIAL VALVES

Documents

FLOK TEK INDUSTRIL PRINT 26-12-15 - Flowtek Valves