-
MANN+HUMMEL ENTARONThe new two-stage filter flexible anddesigned
for compact installation spaces
Entaron en:Entaron en 30.06.2011 11:38 Uhr Seite 1
-
The housing of the new ENTARON is made from
fibre-glassreinforced plastic. This means the filter is able to
handleextreme physical conditions. At the same time the designhas
the advantage that it is resistant to corrosion.
The housing consists of three parts with the casing attachedto
the ports using a special welding process. This weldingensures
robust and reliable joining and at the same timeenables practically
every required orientation of the port tothe integrated bracket.
The result is high flexibility and easyadaptation of the filter to
almost all installation situations.
2
Housing made from fibre-glass reinforced plastic
Raw air inlet
Service cover withlocking device
ENTARON: developed for the highest requirements
Dust discharge valve
MANN+HUMMEL has developed a new two-stage filter forapplications
with heavy dust loads: the ENTARON. Thecompact design of the new
filter combines high performancewith a small installation space and
so takes into account therequirements of next generation machines
and vehicles. TheENTARON 10 is the first product of a new series
designedfor flow rates from 2 to 10 m/min. Further sizes are
currentlyunder development.
Advantages at a glance:
excellent flexibility through variable modular system
corrosion-free and robust housing through use offibre-glass
reinforced plastic
easy handling with tool-free element replacement excellent
reliability through robust elements andpatented sealing system
eco-friendly disposal through metal-free filter element(fully
incinerable)
easy adaptation to different machines throughdifferent port
positions
quick first installation on vehicle through screwthreads
integrated in housing
Robust housing
A high separation efficiency of over 88% makes the newENTARON
ideal for applications with heavy dust loads. Thishigh value also
enables a more compact filter design withoutshortening service
life. In its class, the new ENTARON re-presents the current
benchmark for small installation spacesand service life.
Naturally the standard version is equipped with an
integratedconnection point for a service switch or indicator.
Connection forservice switchor indicator
Integrated mounting pointsM8 or 9 mm (0.35)
Entaron en:Entaron en 30.06.2011 11:39 Uhr Seite 2
-
3ENTARONDimensions and part numbers
Part no.without
secondary element
40 450 92 951
40 450 92 950
40 450 92 952
withsecondary element
40 450 92 941
40 450 92 940
40 450 92 942
MANN-FILTERmain element
C 19 450
MANN-FILTERsecondary element
CF 450
MANN-FILTER replacement elementFig.
1
2
3
Size
ENTARON 10
Nominalflow rate[m/min]
7.5 - 10
ENTARON 10
Size Dimensions in mm [Dimensions in inches]
d1
102(4.02)
d2
256(10.08)
h1
383(15.08)
h2
210(8.27)
h3
27,6(1.09)
h4
130(5.12)
h5
145(5.71)
h6
88(3.46)
b1
52(2.05)
b2
100(3.94)
b3
250(9.84)
b4
280(11.02)
b5
124(4.88)
b6
91(3.58)
t1
63(2.48)
Fig. 1 Fig. 2 Fig. 3
Port size corresponds to
114.3 mm (4.5)
b5
d 2
b 6
h 5h 4
h 6
h1 h3
t1
b1b2
h2
b3
b4
d 1
Entaron en:Entaron en 30.06.2011 11:39 Uhr Seite 3
-
4ENTARONFlow characteristics and specifications
... for flow rates as per ISO 5011ENTARON 10
Flowrateresistance
[mbar]
Volume flow V [m3/min]0 2 4 6 8 10 12
50
40
30
20
10
0
with secondary elementwithout secondary element
... for dust capacity as per ISO 5011ENTARON 10
Flowrateresistance
[mbar]
Dust capacity [g]0 1000 2000 3000 4000 5000 6000 7000 8000
80
70
60
50
40
30
20
10
0
with secondary elementwithout secondary element
Volume flow: 10 m3/min
Further specifications
Operating temperature -30 C to +90 Cwith continuous duty
+110 C for a short time
Tightening torque for 25 Nmmounting screws
Tightening torque for hose max. 6 Nmclamp (on the clean air
side)
Housing material PP GF 30
Replacement parts
MANN-FILTERmain element
C 19 450
MANN-FILTERsecondary element
CF 450
Replacement filter elementSize
ENTARON 10
Cover
40 450 17 999
Dust valve
39 000 40 731
Filter elements
Cover
Dust valve
Entaron en Klapp:Entaron en Klapp 30.06.2011 11:36 Uhr Seite
1
-
The ENTARON was developed especially to meet the re-quirements
of next generation machines. The increasingcomplexity of exhaust
systems today makes the availableinstallation space more and more
important.
In fact installation space is not just important when fitting
thefilter to the machine. The task of servicing the filter in a
tightand hot engine compartment makes efficient use of the
instal-lation space a must. In addition, replacement of the filter
ele-
5
The filter elements of the new ENTARON are designed tohandle
demanding applications:
A patented sealing system ensures reliable sealing
betweenelements and housing.
A robust middle tube made from plastic reinforces the
filterelement and therefore protects the machine.
The safety element in the ENTARON is screwed to thehousing to
prevent the possibility of unintentional removaland to ensure
reliable function of the filter.
High performance filter elements
Filter servicing
Step 1Open the locking devices andremove the cover.
Step 2Remove the used element and insert the new one.
Pleasenote: the ENTARON filter elements are firmly screwed
insidethe housing. When removing the element turn anti-clockwiseto
unscrew and take out the element. When fitting the newelement,
manually screw the element clockwise screw intothe housing until it
locks.
Step 3Replace the cover in thecorrect position and closethe
plastic locking devices.The locking devices will onlyclose if the
cover is in itscorrect position.
ment has to be easy and quick to carry out. The ENTARONfilter
from MANN+HUMMEL solves this problem using anewly-developed system
to combine use of well-establishedconcepts (e.g. tie rods) with
modern handling (e.g. lockingdevice on the service cover). This
enables filter servicing fromthe end of the filter without having
to grip around the filter.Field trials and tests with service
technicians in the constructi-on industry have confirmed the
effectiveness of the concept!
open open
close
close
Entaron en Klapp:Entaron en Klapp 30.06.2011 11:36 Uhr Seite
2
-
W994120801en0711PrintedinGermany
MANN+HUMMELGMBH
MANN+HUMMEL Group
The MANN+HUMMEL Groupis an international companywith its
headquarters inLudwigsburg, Germany.The group employs approx.13,200
people worldwide atmore than 41 locations.
The company develops, pro-duces and sells technicallycomplex
components for theautomotive and other
industries. A key area is highquality filtration productsfor
vehicles, engines andindustrial applications. TheOEM business with
globalmarket leaders and pro-ducers of vehicles, machinesand
installations defines thequality and performanceof the group.
Filters for theinternational aftermarket aresold under numerous
inter-
national brands as well asunder the MANN-FILTERbrand.
MANN+HUMMELIndustrial Filters
The Industrial Filters BusinessUnit with its headquarters
inSpeyer, Germany is spe-cialised in meeting therequirements of
off-highway
vehicle and engine appli-cations, compressed airand vacuum
technology,mechanical engineering andplant construction. For
theseand other industrial fieldsMANN+HUMMEL IndustrialFilters
offers high perform-ance products for the fil-tration and
separation of air,gases and liquids.
MANN+HUMMEL company
Joint venture company
MANN+HUMMEL GMBH, Business Unit Industrial Filters67346 Speyer,
Germany, Telephone +49 (62 32) 53-80, Fax +49 (62 32) 53-88 99
E-Mail: [email protected], Internet:
www.mann-hummel.com
Entaron en:Entaron en 30.06.2011 11:39 Uhr Seite 4
