Filtros Quincy

7/29/2019 Filtros Quincy

1/12

QUINCY AIR SYSTEMS

FILTERS

COALESCERS

ABSORBERS

ELEMENTS

The Science of Compressed Air


2/12

C O M P R E S S E D A I R F I LT E R S

STANDARD FILTERS

Particulate Coalescer Absorber

Our Standard Filtration lineup consists of the threemost common types of filters used in compressedair systems.

THE QUINCY DCN SERIES

Particulate/Coarse Coalescer is designed to removesolids, burnt oil and bulk liquids.

THE CSN, CPN, CXN SERIES

Coalescers remove various levels of liquid aerosolsand mist.

THE ACN SERIES

Activated Carbon Absorbers remove vapors andodors.

10 scfm to 16,500 scfm

230 psig max. working pressurefor threaded filters

150 psig max. working pressurefor flanged filters

Aluminum housing (12" to 3" NPT)

Steel housing (3" to 12" FLG)

MOISTURE SEPARATORS

20 to 1500 scfm, 230 psig

Aluminum housing ( 14" to 3" NPT)

OVER & UNDER

COALESCER/ABSORBER

COMBINATION

10 to 50 scfm/230 psig

Two-in-one design

BREATHABLE AIR SYSTEMS

FOR PAINT OR SANDBLAST

APPLICATIONS(Will not remove certain types ofgases, including CO or CO2 )

15 cfm two-port manifold

30 scfm, four-port manifold

230 psig max. working pressure

Floor stand or wallmounting brackets Air pressure regulator

Air pressure gauge

Available air heater

HIGH-TEMPERATURE

DUST FILTER

+450F/150 psig

15 to 1600 scfm

Quincy Filters protect pneumatic equipment and processes from the harmful effectsof contaminated compressed air by removing dirty water, burnt oil and solid pollutants

before they can do any damage. Clean compressed air will result in improved productionand reduced operating costs. World class, state-of-the-art material and design make QuincyCompressed Air Filters the standard to which all others must be compared.

QuincyCompressor.com | Made in the U.S.A. | The Science of Compressed Air2


3/12

The Science of Air Treatment

ELEMENT CONSTRUCTION

Push-to-Fit Design Aluminum Filters

Easy element replacement

Fit integrity eliminates leaks,saving energy

Stainless Steel Support Core Provides strength

Eliminates corrosion

Protects element from burstingunder high differential pressure

1st Stage Pre-Filtration Support Layer

Captures larger contaminates

Protects 2nd Stage filtration media

Extends service life

Multiwrap 2nd Stage

High void volume minimizespressure drop, saving energy

Increased surface area ensuresmaximum contaminant retention

Extended life construction

Deep bed provides optimumcoalescing efficiency

Selected media combinationsprovide precise filtration solutions

3rd Stage Interceptor Layer

Provides additional strength

Optimizes interception process

4th Stage Outer Stainless Steel Support

Ensures total element integrity

Inside to Out Flow

Prolongs element life andimproves drain performance

Polyester Needle Felt Drainage Layer

Optimum oil removal

High temperature tolerance

Maximum durability

Will not disintegrate Suitable foruse with mineral

and synthetic oils

Tolerant in aggressive environments

Glass-Filled Nylon End Caps

Color-coded for simple elementgrade identification

Easy element replacement

Will not corrode

Quincys Layered Multiwrap design employs a specially blended borosilicate glassmicrofiber media to produce strong, durable and efficient filter elements. The filtrationmedia combines high flow rates and high dirt-holding capacities without compromising

element service life. Easy to identify and easy to install, these highly advanced productsoffer the best performance available

ELEMENTS


4/12


STANDARD LINE PARTICULATE COALESCER ABSORBER

Quincys Standard Filtration lineup consists of the three most common types of filters used

in compressed air systems. Aluminum housings with threaded NPT connections are usedfor flows up to 1530 cfm and steel housings with flanged connections are used for flowsup to 16,500 cfm.

Push-to-fit designused on threaded filters for easy

filter element replacement

Multiwrap element construction ensures optimum

performance

Modular design saves energy and allows for easy

installation of multiple threaded filters

Aluminum housings feature electrophoretic coating

to prevent corrosion 10-year housing guarantee on aluminum housings

Standard pressure differential indicator

Standard automatic condensate drain

STEEL HOUSINGS,

FLANGED CONNECTIONS 1500 TO 16,000 CFM

SERIES DCNF, CSNF, CPNF, CXNF AND ACNF

DCNT SERIES

Designed to remove highconcentrations of solids,burnt oil and bulk liqu id s

DCNT 5 micron, 5 ppm

CSNT, CPNT, CXNT SERIES

Designed to coalesce variouslevels of liqu id aerosols. The1 micron CSN is also an ideal

afterfilter for desiccant dryers.

CSNT 1 micron, 0.1 ppm

CPNT .01 micron, .01 ppm

CXNT .01 micron, .001 ppm

ACNT SERIES

Activated Carbon Absorberdesigned to remove vaporsand odors. Installed imme-

diately downstream ofeither a CPNT or a CXNTcoalescer, itwill reduceoil carryoverto .003 ppm.

Same filtration grade as aluminum filters

Identified with an F suffix

U stamped for the USA and CRN approved for Canada

Housings are freestanding and top loading for easy element replacement

All grades of filter element end caps are molded, providing strength,

durability and long life

ALUMINUM HOUSINGS,

THREADED CONNECTIONS 10 TO 1530 CFM



5/12


Grade 10 14 10 17 Grade E 10 1 3 112 8 3 1.43 0.65 72 35 210 75Grade 20 14 20 33 Grade E 20 1 3 112 8 3 1.43 0.65 72 35 210 75Grade 30 38 30 50 Grade E 30 1 3 112 8 3 1.43 0.65 72 35 210 75Grade 60 12 60 100 Grade E 60 1 312 114 13 4 2.87 1.30 88 32 315 100Grade 125 34 125 208 Grade E 125 1 5 112 15 4 5.95 2.70 125 39 365 100Grade 150 1 150 250 Grade E 150 1 5 112 15 4 5.95 2.70 125 39 365 100Grade 200 1 200 333 Grade E 200 1 5 112 21 6 7.72 3.50 125 39 515 150Grade 300 114 300 500 Grade E 300 1 5 112 21 6 7.72 3.50 125 39 515 150Grade 425 112 425 708 Grade E 425 1 512 2 22 6 9.70 4.40 135 50 545 150Grade 500 2 500 833 Grade E 500 1 512 2 22 6 9.70 4.40 135 50 545 150Grade 650 2 650 1083 Grade E 650 1 512 2 30 6 11.00 5.00 135 50 745 150Grade 800 212 800 1333 Grade E 800 1 8 2 34 32 8 25.40 11.50 200 68 805 200Grade 1000 3 1000 1667 Grade E 1000 1 8 2 34 32 8 25.40 11.50 200 68 805 200Grade 1300 3 1300 2167 Grade E 1300 1 8 2 34 37 8 34.20 15.50 200 68 925 200Grade 1525 3 1525 2542 Grade E 1525 1 9 212 42 12 41.90 19.00 230 65 1050 300

STANDARD LINE SPECIFICATIONS & ENGINEERING DATA

MetricElement Number Dimensions DimensionsFilter Model Pipe Size Flow Rate Model of A B C D Weight A B C D(Grade) NPT scfm Nm3/hr (Grade) Elements In. In. In. In. lb. kg. mm mm mm mm

Complete Filter Assemblies

Grade 1503 3 1500 2550 Grade 1500 1 58 15 48 10 165 74 1472 381 1219 254Grade 1504 4 1500 2550 Grade 1500 1 58 1718 48 612 175 80 1473 435 1219 165Grade 2004 4 2000 3400 Grade 2000 1 58 2138 4814 13 320 145 1473 543 1226 330Grade 2006 6 2000 3400 Grade 2000 1 5914 2512 48 712 360 163 1505 648 1219 191Grade 3004 4 3000 5100 Grade 3000 1 72 2138 6214 13 385 175 1829 543 1581 330Grade 3006 6 3000 5100 Grade 3000 1 7514 25.5 64 712 420 191 1911 648 1626 191Grade 4506 6 4500 7650 Grade 1500 3 8312 2514 6812 2312 580 263 2121 641 1740 597Grade 6008 8 6000 10200 Grade 1500 4 8634 25 68 23 650 295 2203 635 1727 584Grade 10510 10 10500 17850 Grade 1500 7 100 31 80 30 800 363 2540 787 2032 762Grade 16512 12 16500 28050 Grade 1500 11 11334 4412 87 16 1000 454 2889 1130 2210 406

MetricElement Number Dimensions Dimensions

Filter Model Pipe Size Flow Rate Model of A B C D Weight A B C D(Grade) Flg. scfm Nm3/hr (Grade) Elements In. In. In. In. lb. kg. mm mm mm mm

DCNE 3 4 5 5.0 5.0 248 120 1 40 1 75 6 400 232 16 GreenCSNE 2 2 1 0.1 0.1 248 120 1 75 2 150 6 400 232 16 RedCPNE 1 1 0.01 0.01 0.01 248 120 2 100 4 300 6 400 232 16 BlueCXNE 1 1 0.01 0.001 0.001 248 120 2 140 5 350 6 400 232 16 BlackACNE 1 1 0.01 0.003 0.003 77 25 1 75 Min.every 6 months 232 16 Black

Max. Pressure Loss Max. ElementMax. Particle Oil Carryover Max. Change Working End Cap

Filter Max. Particle Size Oil Content Class Removal at 68F at 20C Temperature Clean & Dry Wet Element Pressure ColorElement to ISO 8573-1:2001 to ISO 8573-1:2001 in Microns ppm mg/m3 F C psi mbar psi mbar psi mbar psig barg Code

Specs

Steel Housings Flanged

Operating psig 4 9 15 29 44 58 72 87 100 115 130 145 160 174 189 203 218 232Pressure barg 0.3 0.6 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16Correction Factor 0.21 0.29 0.38 0.53 0.65 0.76 0.84 0.92 1 1.07 1.13 1.19 1.25 1.31 1.36 1.41 1.46 1.51

For maximum flow rate, multiply model flow rate shown in the above table by the correction factor corresponding to the working pressure.

Correction Factor

Model Grades 10, 20 & 30 Model Grades 601525

Model Grades 1503, 1504& 2004

Model Grades 200616512

A

C

D

A

C

B

B

D


6/12


HIGH TEMPERATURE 1 MICRON DUST FILTERS, 450F, 150 PSIG

Features a high-temperature dust filter

with heavy-duty bowl

Ribbed bowl facilitates removal when

changing elements

NOTE: Alloy filters shipped loose will have a special

high-temperature black powder coat paint.

Nomex outer layer is provided for high-temperature operation

Push-to-fit designused on threaded filters for easy filter element replacement

Multiwrap element construction provides optimum performance

ALUMINUM HOUSINGS,

THREADED NPT CONNECTIONS

15 TO 650 CFM,

SERIES HTDT

Same filtration grade as aluminum filters

Identified with an F suffix

U stamped for the USA and CRN approvedfor Canada

Differential pressure indicators are standard

Housings are freestanding and top-loading

for easy element replacement

All grades of filter element end caps are

molded, providing strength, durability

and long life

STEEL HOUSINGS,

FLANGED CONNECTIONS

1500 TO 16,000 CFM,

SERIES HTDF



7/12


HTDT 15 14 15 25 HTDE 15 1 212 12 6 2 0.5 0.25 63 15 150 50HTDT 30 38 30 50 HTDE 30 1 212 12 712 2 0.6 0.27 63 15 190 50HTDT 65 12 65 108 HTDE 65 1 412 112 12 6 5.7 2.60 114 38 305 150HTDT 75 34 75 125 HTDE 75 1 412 112 12 6 5.7 2.60 114 38 305 150HTDT 150 1 150 250 HTDE 150 1 412 112 1512 6 7.3 3.30 114 38 395 150HTDT 300 112 300 500 HTDE 300 1 534 2 21 7 16.5 7.50 146 50 435 170HTDT 450 2 450 750 HTDE 450 1 534 2 21 7 16.5 7.50 146 50 435 170HTDT 650 2 650 1084 HTDE 650 1 534 2 25 7 22.0 10.00 146 50 635 170

HIGH TEMPERATURE SPECIFICATIONS & ENGINEERING DATA

MetricElement Number Dimensions DimensionsFilter Pipe Size Flow Rate Model of A B C D Weight A B C DModel NPT scfm Nm3/hr (Grade) Elements In. In. In. In. lb. kg. mm mm mm mm

Dust Filters Threaded

HTDF 1503 3 1500 2550 HTDE 1500 1 58 15 48 10 165 74 1473 381 1219 254HTDF 1504 4 1500 2550 HTDE 1500 1 58 1718 48 612 175 80 1473 435 1219 165HTDF 2004 4 2000 3400 HTDE 2000 1 58 2138 4814 13 320 145 1473 543 1226 330HTDF 2006 6 2000 3400 HTDE 2000 1 5914 25.5 48 712 360 163 1505 648 1219 191HTDF 3004 4 3000 5100 HTDE 3000 1 72 2138 6214 13 385 175 1829 543 1581 330HTDF 3006 6 3000 5100 HTDE 3000 1 7514 2512 64 712 420 191 1911 648 1626 191HTDF 4506 6 4500 7650 HTDE 1500 3 8312 2514 6812 2312 580 263 2121 641 1740 597HTDF 6008 8 6000 10200 HTDE 1500 4 8634 25 68 23 650 295 2203 635 1727 584HTDF 10510 10 10500 17850 HTDE 1500 7 100 31 80 30 800 363 2540 787 2032 762HTDF 16512 12 16500 28050 HTDE 1500 11 11334 4412 87 16 1000 454 2889 1130 2210 406


Filter Pipe Size Flow Rate Model of A B C D Weight A B C DModel Flg. scfm Nm3/hr (Grade) Elements In. In. In. In. lb. kg. mm mm mm mm

Dust Filters Flanged

High-temperature dust filter element gradeHTDE 1 2 2 450 250 1.1 75 NA NA 6 400 150 10 Brick Red

Max. Pressure Loss Max. ElementParticle Oil Carryover Max. Change Working End Cap

Filter Removal at 68F at 20C Temperature Clean & Dry Wet Element Pressure Color

Element in Microns ppm mg/m3 F C psi mbar psi mbar psi mbar psig barg Code

Specs

ModelsHTDT 15 & 30

ModelsHTDT 65650

Operating psig 145 290 435 580 725Pressure barg 10 20 30 40 50Correction Factor 0.34 0.57 0.71 0.86 1.0

For maximum flow rate, multiply model flow rateshown in the above table by the correction factorcorresponding to the working pressure.

Correction Factor

ModelsHTDF 1503, 1504 and 2004

Models HTDF 200616512

A

C

D

A

C

B

B

D


8/12

BREATHABLE AIR SYSTEMS

15 TO 30 CFM

Quincy Breathable Air Packages are completesystems designed to provide, clean, odor-free,taste-free, particle and liquid oil-free compressed

air for sand blasting and/or painting hoods. The15-cfm system has two outlet ports and can

accommodate two suits. The 30-cfm packagehas four outlet ports and can accommodate four

suits. The system provides absolute filtrationdown to 0.01 micron and oil removal down to0.003 ppm. Special non-shedding, high-speed

carbon granules increase vapor-holding capacity.

The System Includes:

Aluminum housings with electrophoretic

coating to prevent corrosion

WSNT moisture separator

CSNT 1 micron, 0.1 ppm Coalescer

QUDT with CPNT 0.01 micron, 0.01 ppm

and .003 ppm activated carbon absorber

Wallmounting or floor-mounting

configuration

The System includes:

Combination Coalescer and Activated Carbon Absorber

Two functions in one unit

Space-saving Over & Under configuration

Push-to-fit design for easy filter element replacement

Multiwrap element construction ensures

optimum performance

Non-shedding, high-speed carbon granules

increase vapor-holding capacity

Aluminum housings with electrophoretic

coating to prevent corrosion.

Standard pressure differential indicator


Using a unique two-sided head, Quincys Over & Under Duplex filtercombines a CPN Series (0.01-micron, 0.01-ppm) coalescer with an

ACN Series (.003-ppm) activated carbon absorber. This compact, two-stage, single-piece filtration system saves space, is easy to install and

delivers ISO 8573.1 class 1 compressed air. The Over & Under is idealfor food and beverage, instrumentation and pharmaceutical applications.

OVER & UNDER DUPLEX

10 TO 50 CFM, SERIES OUDT


Push-to-fit design

PNF drain layer

Pressure differential

indicator

Multiwrap construction

Air pressure regulator

and gauge

Activated carbon element impregnated

with red dye oil indicator

Color-coded end caps

Compressed air heater option



9/12


WARNING: The Breathable air systems described in this brochurewill not remove certain types of gases, including Carbon Mon-oxide (CO) and Carbon Dioxide (CO2). These Breathable AirSystems are designed to offer the user protection in potentiallyharmful environments. It is therefore imperative the products be

correctly installed and properly controlled by a competent person.Properly controlled means the equipment installed should befully checked prior to every use. Should any fault be discovered,it must be repaired or the failed component replaced to guaran-tee full working order before use.

Wallmounted Breathable Air PackagesBWST 15 14 2 15 25 BAEK 15 1 Kit 1014 1234 1234 3 0.50 0.25 280 360 323 77BWHT 15 14 2 15 25 BAEK 15 1 Kit 1534 18 1314 4 0.60 0.27 418 498 337 100BWST 30 38 2 15 25 BAEK 30 1 Kit 1014 1234 1234 3 5.70 2.60 280 360 323 77BWHT 30 38 2 15 25 BAEK 30 1 Kit 1534 18 1314 4 5.70 2.60 418 498 337 100

Frame-Mounted Breathable Air PackagesBFST 15 14 4 30 50 BAEK 15 1 Kit 1934 NA 1734 1934 2.35 1.05 500 NA 450 500BFHT 15 14 4 30 50 BAEK 15 1 Kit 1934 NA 1734 1934 2.35 1.05 500 NA 450 500BFST 30 38 4 30 50 BAEK 30 1 Kit 1934 NA 1734 1934 2.35 1.05 500 NA 450 500BFHT 30 38 4 30 50 BAEK 30 1 Kit 1934 NA 1734 1934 2.35 1.05 500 NA 450 500

MetricPipe Air Element Number Dimensions Dimensions

Filter Size Outlet Flow Rate Model of A B C D Weight A B C DModel NPT Ports scfm Nm3/hr (Grade) Elements In. In. In. In. lb. kg. mm mm mm mm

Breathable Air Packages

Operating psig 4 9 15 29 44 58 72 87 100 115 130 145 160 174 189 203 218 232Pressure barg 0.3 0.6 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16Correction Factor 0.21 0.29 0.38 0.53 0.65 0.76 0.84 0.92 1.0 1.07 1.13 1.19 1.25 1.31 1.36 1.41 1.46 1.51

For maximum flow rate, multiply model flow rate shown in the above table by the correction factor corresponding to the working pressure.

Correction Factor

Breathable Air Package KitBAEK 1 1 >0.01 >0.003 >0.003 77 25 3.7 250 6.6 950 Min.every 6 months 145 10 Red/Blue/Black

Duplex Filter Kit (OUDK)CPNE 1 1 0.01 0.01 0.01 248 120 2.2 150 4.4 300 6 400 232 16 BlueACDE 1 1 0.01 0.003 0.003 77 25 1.1 75 NA NA Min.every 6 months 232 16 Black

Max. Pressure Loss Max. ElementMax. Particle Oil Carryover Max. Change Working End Cap

Filter Max. Particle Size Oil Content Class Removal at 68F at 20C Temperature Clean & Dry Wet Element Pressure ColorElement to ISO 8573-1:2001 to ISO 8573-1:2001 in Microns ppm mg/m3 F C psi mbar psi mbar psi mbar psig barg Code

Specs

OUDT 10 14 10 17 OUDK 10 1 Kit 3 6 7 3 1.90 0.85 72 150 173 75OUDT 15 14 15 25 OUDK 15 1 Kit 3 6 7 3 1.90 0.85 72 150 173 75OUDT 30 38 30 50 OUDK 30 1 Kit 3 6 7 3 1.90 0.85 72 150 173 75OUDT 50 12 50 83 OUDK 50 1 Kit 312 8 9 4 2.75 1.25 90 200 225 100


Filter Pipe Size Flow Rate Model of A B C D Weight A B C D

Model NPT scfm Nm3

/hr (Grade) Elements In. In. In. In. lb. kg. mm mm mm mm

Over & Under Duplex

ModelsBWST 15 & 30

ModelsBFST 15 & 30

ModelsOUDT 1050

BREATHABLE AIR, OVER & UNDER DUPLEX SPECIFICATIONS & ENGINEERING DATA


10/12


MECHANICAL MOISTURE SEPARATORS

20 TO 1500 CFM, 230 PSIG, SERIES WSNT

Quincy Mechanical Moisture Separators are designed to remove bulk liquids andlarge volumes of water. They are typically installed downstream of aftercoolers, air

receivers, refrigerated air dryers and at strategic points of use throughoutthe compressed air distribution system. The design employs an

internal spinner to create a centrifugal action that effectivelyremoves large quantities of water.

Large sump and quiet zone to prevent moisture

re-entrainment

Modular design allows for easy installation

of multiple housings and saves energy

Annular seal and captive Oring prevent leaks

Aluminum housings (14" to 3 NPT) feature

electrophoretic coating to prevent corrosion

Aluminum housings (14" to 3" NPT) carry

a 10-year housing guarantee


WSNT 20 14 20 35 3 114 814 3 1.45 0.65 72 35 210 75WSNT 30 38 30 50 3 114 814 3 1.45 0.65 72 35 210 75WSNT 63 12 63 112 312 114 814 4 2.90 1.30 88 32 210 100WSNT 127 34 127 216 5 112 12 4 5.95 2.70 125 39 300 100WSNT 176 1 176 300 5 112 12 4 5.95 2.70 125 39 300 100WSNT 318 114 318 540 5 112 12 4 5.95 2.70 125 39 300 100WSNT 427 112 427 725 512 2 19 6 9.70 4.40 135 50 480 150WSNT 675 2 675 1150 512 2 19 6 9.70 4.40 135 50 480 150WSNT 1000 212 1000 1700 8 234 24 8 25.5 11.5 200 68 590 200WSNT 1500 3 1500 2550 8 234 24 8 25.5 11.5 200 68 590 200

MetricDimensions Dimensions

Filter Pipe Size Flow Rate A B C D Weight A B C DModel NPT scfm Nm3/hr In. In. In. In. lb. kg. mm mm mm mm

Moisture Separators

Operating psig 4 9 15 29 44 58 72 87 100Pressure barg 0.3 0.6 1 2 3 4 5 6 7Correction Factor 0.21 0.29 0.38 0.53 0.65 0.76 0.84 0.92 1

Operating psig 115 130 145 160 174 189 203 218 232Pressure barg 8 9 10 11 12 13 14 15 16Correction Factor 1.07 1.13 1.19 1.25 1.31 1.36 1.41 1.46 1.51

For maximum flow rate, multiply model flow rate shown in the above table by thecorrection factor corresponding to the working pressure.

Correction Factor

WSNT 248 120 35 1.5 0.7 50 232 16

Max. Min. Typical Max.Recommended Recommended Pressure Loss Working

Filter Operating Temp. Operating Temp. At Rated Flow PressureModel F C F C psi mbar psig barg

Specs

SPECIFICATIONS & ENGINEERING DATA



11/12


QUINCY SYSTEM PRESSURE TRANSMITTERS

Quincy System Pressure Transmitters sense pressure, differential pressure or both

at specific points throughout a compressed air system. Accurate to half of 1%,a 4 to 20 mA signal continuously transmits readings to the systems main

control station.

Continuous and accurate pressure tracking facilitates periodic

compressed air audits and enables the automation and/or operatorto monitor the system and adjust controls for optimum efficiency.

Reduce energy and filtration costs

Improve air treatment efficiency

Monitor critical applications

24/7 operation

Simple and cost-effective installation

Guaranteed for 5 years

Rugged NEMA 4/IP65 rating

ACCESSORIES

Quincy filtration products come standard with mechanicalcondensate drains and are available with

Optional electronic timer drains

Optional pneumatic no-loss drains

Optional electronic no-loss drains

Quincy Filters are equipped standard with top-mounted pressure indicators.

Pop-up for 10 cfm through 30 cfm

( 12" NPT & 3/8" NPT)

Gauge for 50 cfm through 16,500 cfm

( 12" NPT through 12" FLG)

Multiple filters can be ganged together using the available two- and three-unit

connecting kits.

Eliminates leaks, saving energy

Easy and space-saving installation

Aluminum Alloy filters can be wallmounted using the available wallmounting brackets.

Provides easy and flexible installation

1


12/12

quincycompress or.com

QGV-100quincycompressor.com

QPNC-500quincycompressor.com

QDHT-1000quincycompressor.com

Air Quality ClassificationISO 8573.1

Quincy Rotary Screw WSNBulk

LiquidDP1

WetReceiver

1gal/CFMDP2

DryReceiver

5gal/CFM

CSN1 Micron0.1 PPM

DP3

CPN0.01 Micron

0.01 PPMDP5

ACN0.003 PPMVapor &

Odors

Solids

Micron ISO PDP ISO PPM ISO

0.01 1 +38F 4 0.01 1 10.7 738

0.01 1 +38F 4 0.003 1 11.8 814

1 2 -40F 2 0.01 1 9.2 634

0.01 1 -40F 2 0.003 1 10.3 710

1 2 +50F 6 0.01 2 7.8 538

0.01 1 +50F 6 0.003 1 10.0 689

1 2 -40F 2 0.01 1 9.2 634

0.01 1 -100F 1 0.001 1 14.2 979

Moisture Oil

psi Mbar

Refrigerated Air DryerQPNC Non-Cycling

QPCD CyclingDP4

WetSystemAvg. P

Quincy Reciprocating AC

WSN Moisture Separator

DCN Particulate/Coarse Coalescer

CSN STD 0.1 PPM Coalescer, 1 Micron

CPN Polishing 0.01 PPM Coalescer

CXN Xtra 0.001 PPM Coalescer

ACN Activated Carbon Absorber

OUD Over + Under Duplex

HTD High Temperature,1 Micron

QPNC Non-Cycling Refrigerated Dryer

QPCD Cycling Refrigerated Dryer

QDTS Small Heatless Dryer

QDTH Industrial Heatless Dryer

QDHP Heated Purge Dryer

QDBP Blower Purge Dryer

QPHT High Temp. Refrigerated Dryer

WOS Water/Oil Separator

AC After Cooler

DP Drain Point

WSNBulk

LiquidDP6

DryReceiver

5gal/CFM

CPN0.01 Micron0.01 PPM

DP7

CSN (NPT)HTD (FLG)1 Micron

Particulate

ACN0.003 PPMVapor &

Odors

0.01 1 -40F 2 0.003 1 10.3 710

ACN0.003 PPMVapor &

Odors

Desiccant Heatless Air DryerQDTSSmall

QDTHIndustrial-40F PDP

DCN5 Micron

5 PPMDP9

WOSWater/OilSeparator

CSN1 Micron0.1 PPM

DP11 CPN0.01 Micron

0.01 PPM

ACN0.003Micron

OUD

High Temperature/Refrigerated Air DryerQPHTHigh Temp.

DP10

DryReceiver

5gal/CFM

CPN0.01 Micron0.01 PPM

DP8

Desiccant Heated Air DryerQDHPHeated PurgeQDBPBlower Purge

-40F PDP

QDHP-1000quincycompressor.com

Approximate Liquid Removal100 CFM, 100 psi, 80F, 4000 hrs./yr., 2 PPM

DrainPoint

1234

30002000305

1300

Gallonsper Year

DrainPoint

5678

1403000310310

Gallonsper Year

DrainPoint

91011

3004320120

Gallonsper Year

QPHT-40quincycompressor.com

NOTE: Requires CXN (.001 PPM) filter in

series with standard CPN prefilter.

CSN1 Micron

Particulate

701 North Dobson Avenue | Bay Minette, AL 36507 | Phone 251.937.5900 | Fax 251.937.7182 | Nearest Distributor: 888.424.7729 | Email: [email protected]

2005 Quincy Compressor anEnPro IndustriescompanyAll rights reserved. Litho in U.S.A. (QATF-001 03/05)


COMPRESSED AIR SYSTEMS BEST PRACTICE

Documents

Filtros Quincy