Ficha Tecnica Termoencogible

5/20/2018 Ficha Tecnica Termoencogible

1/33

CYGheatshrink.co

201C A T A L O

POLYOLEFIN SINGLE WALL TUBING POLYOLEFIN DUAL WALL TUBING

SPECIAL DESIGN SINGLE WALL TUBING EXTRUSION TUBE

CYGUSA| 5185 N. US 31 | Eastport, MI 49627 | T 231.599.9956 | F 231.599.2965 | WWW.CYGHEATSHRINK.C

HEAT SHRINK

TUBING

CYG AGENT


2/33

CYG Electronics (Shenzhen) Co. Lt. (CYG) is the leaing manufacturer of heat shrinabl

proucts in China. With more than 15 years eperience in inustry research an evelopmen

CYG is the 3r largest heat shrin manufacturer in the worl. CYG now has si sub-factorie

an went public with a successful Chinese stoc maret launch in 2002. [Shanghai Stoc

Echange Coe: 600525]

CYG prouces a comprehensive range of heat shrinable tubing in various colors an shrin

raos, Teon tubing proucts an PVC tubing. All proucts are manufacture uner TS1694

Quality System an ISO9001 Environment System cercaons an are prouce to mee

or ecee UL224 or MIL approval requirements. They are wiely use in els such a

automove, communicaons, construcon, electrical, energy an logiscs.

Environmentally responsible proucon is a requirement at CYG. As both a Samsung an

Sony Green Partner, our proucts not only meet Sonys environment substance requirement

but are also EU ROHS compliant.

Toay, CYG enjoys an ecellent reputaon for eporng high quality proucts to Europe

North America, South America , Australia, an South East Asia.

Being a ey supplier of electrical insulaon an protecon proucts, it is our mission to elive

safe, reliable an innovave new proucts that combine opmal value with high quality. W

bac everything we manufacture with eceponal customer service to our partners.


3/33


4/33

- 4 -

CYGUSA| 5185 N. US 31 | Eastport, MI 49627 | T 231.599.9956 | F 231.599.2965 | WWW.CYGHEATSHRINK.COM

To place an order or for any uesons,

call customer service at:

231.599.9956

[email protected]


5/33


TABLE OF CONTENTS

CBHFT 600, 2:1 NONAdHESIVE UL ANd CSA APPROVEd HEAT SHRINk ............................................

CBTM, 2:1 OR 3:1 NONAdHESIVE MIL STANdARd, UL

ANd CSA APPROVEd HEAT SHRINk MARkER MATERIAL

IN BULk OR FORMATTEd .........................................................................................................................CBHFT3x/4x, 3:1 OR 4:1 NONAdHESIVE UL

ANd CSA APPROVEd HEAT SHRINk .........................................................................................................

CBHFT1000, 2:1 NONAdHESIVE MIL STANdARd,

UL ANd CSA APPROVEd HEAT SHRINk ...................................................................................................

CBdWT2x,3xOR4x 2:1, 3:1 OR 4:1 dUAL WALL AdHESIVE

LINEd UL ANd CUL APPROVEd HEAT SHRINk TUBING .........................................................................

CBdWT10003x 3:1 dUAL WALL AdHESIVE LINEd MIL STANdARd,

UL ANd CSA APPROVEd HEAT SHRINk TUBING .....................................................................................

CBdWT3000 4:1 dUAL WALL AdHESIVE LINEd MIL STANdARd,

UL ANd CSA APPROVEd HEAT SHRINk TUBING ....................................................................................

CBdWTFR 4:1 dUAL WALL FLAME RETARdANT AdHESIVE LINEd

MIL STANdARd, UL ANd CSA APPROVEd HEAT SHRINk TUBING .........................................................

CYGkYNAR 175C 2:1 FLAME RETARdANT PVdF MIL STANdARd,

UL ANd CSA APPROVEd HEAT SHRINk TUBING .....................................................................................

CYGPTFE 1.8:1 HIGH TEMPERATURE, HIGH FLAME RETARdANT

MIL STANdARd, UL ANd CSA APPROVEd HEAT SHRINk TUBING .........................................................

CBTT NON SHRINkABLE PTFE TUBING UL APPROVEd .........................................................................

CBPVC 300/600 NONSHRINkABLE PVC TUBING UL ANd CSA APPROVEd ........................................

CBSRS FIBERGLASS TUBING WITH SILICONE RUBBER COATEd

UL ANd CSA APPROVEd ........................................................................................................................

CBSGS FIBERGLASS TUBING WITH SILICONE RESIN COATEd

UL ANd CSA APPROVEd ...........................................................................................................................

EqUIPMENT FOR THE PROCESSING OF HEAT SHRINK

HEAT SHRINk PRINTER CAB A4+M FOR PRINTING

ON ONE SIdE OF HEAT SHRINk.................................................................................................................

dUAL HEAd HEAT SHRINk PRINTER CAB xdM4 FOR PRINTING ON BOTH SIdES OF HEAT SHRINk ..

HEAT SHRINk PROCESSING MACHINES THAT USE HALOGEN LIGHT SOURCE .....................................

HEAT GUNS ................................................................................................................................................


6/33

- 6 -


CBHFT600 UL/CUL NONADHESIVE

HEAT SHRINKABLE TUBING

CB-HFT(600) is UL/CUL rate halogen-free, e-

ible, ame-retarant polyolen 2:1 heat shrinable

tubing. This tubing is low smoe generang, abra-sion resistant an in case of burning, prouces no

ioin. CB-HFT tubing is wiely use in enclose

areas where a ame-retarant, halogen-free envi-

ronment is require. It is perfect for electrical an

electronics applicaons an has uses in els such

as aerospace, automove, construcon, power e-

livery, an mass transit vehicles incluing buses,

trains, airplanes, an marine vessels.

Cercaons: UL, CUL, F-mark,Sony Green Partner

SPECIFICATIONS

Specicaons of HFT(600):

Item Specicaons

Shrin Temperature (C) 90C

Operang Temperature Range (C) 125C

Raial Shrining Rao (%) 50

Longituinal Change (%) 5

Tensile Strength (Mpa) 10.4

Elongaon at brea (%) 200

Aging in Circulang-air Oven 158.01.0C, 168hrs

Aer agingTensile Strength (Mpa) 7.3


Volume Resistance ( .cm) 1014

dielectric Strength at 1 min, AC2500V No breaown

Heat shoc No cracing

Flammability VW-1

Concentricity (%) 70


7/33


SIzING

Size (Inches)

(Reel Size in feet)

As Supplie (inches) Aer Recovery (inches)

MIN Id WALL MAx Id WALL

1/16 (500 ) .062 .0078.003 .0313 .0157.0024

3/32 (500 ) .093 .0078.003 .0469 .0165.0032

1/8 (500 ) .125 .0098.004 .0625 .0181.0032

3/16 (250 ) .187 .0098.004 .0938 .0196.0039

1/4 (250 ) .25 .0110.004 .125 .0220.0039

5/16 (250 ) .313 .0118.004 .157 .0228.0039

3/8 (200 ) .375 .0118.004 .1875 .0236.0039

1/2 (200 ) .50 .0141.005 .25 .0256.0047

5/8 (200 ) .625 .0141.005 .313 .0275.0047

3/4 (100 ) .75 .0157.006 .375 .0295.0047

1 (100 ) 1 .0157.006 .50 .0354.0059

11/2 (100 ) 1.5 .0216.009 .75 .0433.0098

2 (100 ) 2 .0236.009 1 .0472.0098

3 (100 ) 3 .0275.012 1.5 .0571.0098

4 (100 ) 4 .0275.012 2 .0571.0098

Other sizes are available upon special orer.

Part numbers for above proucts are CB-HFT600-(dia. Size)-(Color)-(Reel Size), for eample,

CB-HFT600-1/2-Bk-200 woul be HFT600 series, in a iameter, in blac, on a stanar 200

foot reel. 1/8 through 3/8 are available in a Flat style (opon) for easier use with printers.


8/33

- 8 -


CBHFTTM HEATSHRINKABLE INDENTIFICATION MARKER SLEEVES

CB-HFT(TM)-L is our laer material. CB-HFT(TM)-B

is our bul material on a reel. CB-HFT(TM) is use to

ienfy wire an cable, tools, hoses an equipment

in operang environments where temperatures

range from 55 to 135. It can withstan abrasion

an eposure to cleaning solvents an other inus-

trial uis. Sleeves are ame-retarant an can be

use for electrical insulaon.

This tubing can be custom printe with wors an

symbols on both sies by thermal transfer equip-

ment an all marings are permanent aer prinng.

Available in 2:1 an 3:1 shrin raos an in many

ierent sizes an shapes.

Cercate: UL, CUL, F-mark, Sony Green PartnerStanar: UL224, AMS-dTL-23053/5, SAE-AS81531, MIL-STd-202

Stanar color: at white an yellow

SPECIFICATIONS

Specicaons:Item Specicaons

Physical performance

Operaon temp. -55C~135C

Tensile strength (M Pa) 10.3Mpa

Ulmate elongaon rao(%) 200%

Fleibility (-55C, 4hrs) No cracing

Heat shoc No cracing, ripping, owing

Print performance

UL 224, 50 Rubber erasure , iencaon

MIL-M-81531-4.6.2 50 Rubber erasure , iencaon

MIL-STd-202 30 Rubber erasure , iencaon

Electrical performance

dielectric strength 19.7kV/mm

Volume Resistance 1014cm

Flammability as per AMS-dTL-23053 Average burn me is


9/33


SIzING C BHFT TM 3X

SIZE Inch Min Epane iameter as

supplie (mm)

Ma iameter Aer

recovery (mm)

Recommene use range

(mm)

3/32 2.4 0.80 0.9-2.0

1/8 3.2 1.07 1.1-2.7

3/16 4.8 1.60 1.8-4.1

1/4 6.4 2.11 2.3-5.5

3/8 9.5 3.2 3.5-8.0

1/2 12.7 4.2 4.7-10.8

3/4 19.1 6.35 7-16.3

1 25.4 8.46 9.3-21.6

1-1/2 38.1 12.7 13-33.5

2 50.8 16.9 17-48

SIzING C BHFT TM 2X

SIZE Inch Min Epane iameter

as supplie (mm)

Ma iameter Aer

recovery (mm)

Recommene use

range(mm)

3/32 2.4 1.2 1.3-2.0

1/8 3.2 1.6 1.7-2.73/16 4.8 2.4 2.5-4.1

1/4 6.4 3.2 3.3-5.5

3/8 9.5 4.8 4.9-8.0

1/2 12.7 6.4 6.5-10.8

3/4 19.1 9.5 9.6-16.3

1 25.4 12.7 12.8-21.6

1-1/2 38.1 19.1 19.2-33.5

2 50.8 25.4 25.5-48


10/33

- 10 -


CBHFT3X ,CBHFT4X UL/CUL

NONADHESIVE HEAT SHRINKABLE TUBING

CB-HFT(3x) 3:1 shrin rao an CB-HFT(4x) 4:1

shrin rao are UL/CUL rate, non-ahesive, halo-

gen-free, eible, ame-retarant polyolen heatshrinable tubing. This tubing can be use in areas

where larger than the stanar 2:1 shrin rao are

neee. It is also use for protecon an maring

of special shape objects, such as wire terminaons

an electrical connecons, cables an electronic

components.

Cercate: UL, CUL, F-mark,

Sony Green Partner

SPECIFICATIONS

Specicaons of HFT(3X) and HFT(4X):Item Specicaons

Shrin Temperature (C) 90C

Operang Temperature Range (C) 125C

Shrining Rao 3:1, 4:1



Elongaon at brea(%) 200

Aging in Circulang-air Oven 158.01.0, 168hrs



Volume Resistance ( cm) 1014

dielectric Strength at 1 min, AC2500V No breaown

Flammability VW-1

Concentricity (%) 65


11/33


SIzE OF HF T 4X

SIzE OF HF T 3X

Size (mm)

As Supplie (mm) Aer Recovery (mm)

Min. Insie

diameter

Nominal

Wall-thicness

Ma. Insie

diameterWall-thicness

1.5/0.5 1.5 0.180.08 0.5 0.40.1

3/1 3.0 0.200.08 1.0 0.550.1

4.5/1.5 4.5 0.200.08 1.5 0.550.1

6/2 6.0 0.220.0 2.0 0.60.15

9/3 9.0 0.250.0 3.0 0.70.15

12/4 12.0 0.250.1 4.0 0.70.15

15/5 15.0 0.250.1 5.0 0.70.15

18/6 18.0 0.30.12 6.0 0.80.2

24/8 24.0 0.360.15 8.0 1.00.2

30/10 30.0 0.360.15 10.0 1.00.2

33/11 33.0 0.360.15 11.0 1.00.2

39/13 39.0 0.450.15 13.0 1.250.2

Size (mm)

As Supplie (mm) Aer Recovery (mm)

Insie

iameter

Nominal

Wall-thicnessInsie iameter Wall-thicness

8/2 8.50.5 0.300.15 2.0 0.950.15

10/2.5 10.50.5 0.300.15 2.5 1.000.15

12/3 12.50.5 0.300.15 3.0 1.000.15

16/4 16.50.5 0.300.15 4.0 1.000.15

18/4.5 18.50.5 0.300.15 4.5 1.000.15

20/5 20.50.5 0.300.15 5.0 1.000.15

24/6 25.50.5 0.400.20 6.25 1.400.20


12/33

- 12 -


CBHFT1000 MIL/UL NONADHESIVE HEAT SHRINKABLE TUBING

CB-HFT(1000) is MIL Spec, non-ahesive, low-

smoing, halogen-free 2:1 polyolen cross-line

heat shrinable tubing that is esigne to meet the

specialize requirements of the automove inus-

try. It has goo resistance to oil an is an ecellent

insulator. This material is very eible an has e-

cellent mechanical strength, so it is suitable for a

wie range of applicaons incluing automove oil

pipes, electronics insulaon, wire protecon, an

any place protecon is neee in etreme environ-

ments.

Cercate: UL, CUL, F-mark, Sony Green

Partner Standard: UL224, AMS-DTL-23053/5

SPECIFICATIONS

Specicaons of HFT(1000):Item Test metho Stanar Specicaons

Operang Temperature Range -55C - +135C

Shrin Temperature +100 C - +140C

Tensile Strength (MPa) ASTM d638 10.4MPa 14.1MPa

Elongaon at Brea ASTM d638 200% 329%

dielectric Strength ASTM d2671 19.7v/mm 26v/mm

Volume Resistance ASTM d876 11012 3.61014

Longituinal Change -5% ~ +5% -4%

Raial Shrin Rao 50% 66%

Concentricity 50% 73%

Aging in Circulang

Air Oven1752C, 168hrs

Tensile Strength ASTM d638 6.9MPa 9.5MPa


Heat Shoc 25034hrs No ropping, No ow,

No cracing

pass

Copper corrosion ASTM d2671 1752168hrs No corrosion


13/33


SIzE OF HFT 1000

Size in inches

(Reel size in )

Insie iameter Wall thicness aer

recovery

(in inches)Min Id As supplie (ininches) Ma Id Aerrecovery (in inches)

1/16 (500 ) .0625 0.3125 0.0170.003

3/32 (500 ) .09375 0.046875 0.020.003

1/8 (500 ) .125 .0625 0.020.003

3/16 (250 ) .1875 .09375 0.020.003

1/4 (250 ) .25 .125 0.0250.003

3/8 (200 ) .375 .1875 0.0250.003

1/2 (200 ) .5 .25 0.0250.003

3/4 (100 ) .75 .375 0.030.003

1 (100 ) 1 .5 0.0350.005

11/2 (100 ) 1.5 .75 0.040.006

2 (100 ) 2 1 .04490.007


14/33

- 14 -


CB DWT 2X3X4X UL/CUL ADHESIVE LINED HEAT SHRINKABLE TUBING

CB-dWT(2x)(3x)(4x) is 2:1, 3:1 an 4:1, UL/CUL

rate, ahesive-line, eible, halogen-free an

ame-retarant polyolen heat shrinable tubing

which is ROHS compliant an meets Sonys environ-

ment relate substance requirements. This tubing

has goo mechanical strength an provies protec-

on from uis, moisture an corrosion. CB-dWT

is use in a wie variety of electrical applicaons,

incluing bac en connector sealing, breaouts,

an connector-to-cable transions. High epansion

rao maes it possible to repair most amage ca-

ble jacets without removing connectors.

Cercate: UL, CUL, F-mark, Sony Green Partner

SPECIFICATIONS

Specicaons of

DWT(2X), DWT(3X) and DWT(4X):Item Specicaons

Shrin Temperature(C) 110C

Operang Temperature Range(C) -55C125C



Raial shrining rao (%) 50


Aging in Circulang-air Oven 158.01.0C, 168hrs

Aer Aging Tensile Strength (Mpa) 7.3


dielectric Strength at 1min, AC2500V No breaown


Flammability VW-1

Water Absorpon (%) Less than 0.4%

Flui Resistance Ecellent

(Copper Corrosion) (No Corrosion)

Soening Point of Meltable Liner (C) 1205

Peel Strength of Meltable Liner (N/25mm) >80


15/33


SIzE OF DWT 2X

Size(Inch)

As Supplie Aer Recovery

Min Id (inches)Nominal Wall

(inches)

Ma Id

(inches)Total Wall (inches)

Nominal Ahesive

Wall(inches)

1/16 .0625 .0118 .03125 .0177.0047 .0078

3/32 .09375 .01378 .046875 .02165.0047 .0118

1/8 .125 .01575 .0625 .02362.006 .0118

3/16 .1875 .01575 .09375 .02953.006 .01378

1/4 .25 .01575 .125 .02953.006 .01378

3/8 .375 .01575 .1875 .0315.0079 .01378

1/2 .5 .01575 .25 .0315.0079 .01378

3/4 .75 .01969 .375 .0374..0110 .01578

1 1 .01969 .5 .04528.0110 .0177

1 -1/2 1.5 .0256 .75 .04921.0161 .0177

SIzE OF DWT 3X

Size (Inch)

As Supplie Aer Recovery

Min Id

(inches)

Nominal Wall

(inches)

Ma Id

(inches)Total Wall (inches)

Nominal Ahesive Wall

(inches)

1/8 .125 .01575 .04167 .03346.011 .01378

3/16 .1875 .01575 .0625 .04134.011 .01772

1/4 .25 .0177 .08333 .04331.011 .01772

3/8 .375 .0236 .125 .05709.011 .01772

1/2 .5 .0236 .1667 .05906.0145 .01772

3/4 .75 .0295 .25 .07874.0217 .02559

1 1 .0295 .3333 .07874.0217 .02559

1 1/4 1.25 .0315 .4167 .08661.0217 .02953

1 1/2 1.5 .03346 .5 .10.0217 .03937

2 2 .03937 .6667 .10.0217 .03937

SIzE OF DWT 4X

Size (mm)

As Supplie (Epane) Aer Recovery (Recovere)

Min Id(mm) Ma Id(mm) Total Wall (mm)Nominal Ahesive Wall

(mm)

4/1 4 1 1.100.3 0.50

8/2 8 2 1.100.3 0.50

12/3 12 3 1.400.3 0.61

16/4 16 4 1.80.3 0.76

24/6 24 6 2.250.55 0.76

32/8 32 8 2.540.55 1.02

52/13 52 13 2.600.55 1.02


16/33

- 16 -


CB DWT1000 ADHESIVELINED HEAT SHRINKABLE TUBING

CB-dWT(1000) is a 3:1, MIL Spec, ahesive-line,

eible, ame-retarant polyolen heat-shrinable

ual-wall tubing. This tubing has goo mechanical

strength, oil-resistance an bio resistance when

use for etreme environments an specialize

protecon. CB- dWT(1000) is wiely use in jacet-

ing for wire bunles an harnesses.

Standard: UL224 and MIL - SAE-AMS-

DTL23053/4, F Mark, Sony Green Partner

SPECIFICATIONS

Specicaon of DWT(1000):

Item Test methos Specicaons Typical value

Operang Temperature Range -55C +135C

Shrin Temperature +100C + 140C

Shrin Rao 3:1

Tensile Strength ASTM d638 10.4MPa 14.1MPa *1

Elongaon At Brea (%) ASTM d638 200% 329%

2% Scan Moulus ASTM d882 172MPa 153MPa

Heat Shoc 2503 , 4hrs No cracing, ripping, owing Pass

Col Shoc ASTM d745, -552 No cracing Pass


Volume Resistance ASTM d876 11012 3.61013

Aging 1752 , 168hrs Ahesive, no ripping

Sleeving, no cracing Pass

Oil Resistant 243 , 24hrs

Tensile Strength Aer Aging ASTM d638 6.9MPa 9.5MPa

dielectric Strength Aer Aging ASTM d2671 15.8v/mm 24v/mm

SIzE OF DWT 1000

SizeInsie diameter (inches) Wall Aer Recovery (inches)

Min. as supplie Ma. aer recovery Total wall Ahesive wall

1/8 .125 .04167 .0382.0060 .02

3/16 .1875 .0625 .0429.0060 .025

1/4 .25 .08333 .0469.0070 .027

3/8 .375 .125 .0500.0070 .03

1/2 .5 .1667 .0551.0070 .035

3/4 .75 .25 .0650.0070 .04

1 1 .3333 .0752.0070 .04


17/33


CBDWT3000 SEMIRIGID HEAT SHRINKABLE TUBINGS

WITH MELTABLE LINER

CB-dWT(3000) is a 4:1, MIL Spec, semi-rigi, ame-

retarant, ahesive-line polyolen heat shrin-

able tubing. It is esigne to meet automoverequirements for sealing an electrical insulaon

when use for covering wire splices, terminaons

an components. It provies abrasion protecon

for wire splices, an is ui-resistant an moisture-

proof, to guar against corrosion.

Standard: UL224, MIL - SAE-AMS-

DTL-23053, F mark, Sony Green partner

SPECIFICATIONS

Specicaons of DWT(3000):Item TEST METHOd Specicaons

Operang temperature range (C) -40C to 135C

Min. shrin temperature (C) 110C

Longituinal Change (%) ASTM d 2671 0~10%

Tensile Strength (M Pa) ASTM d 2671 10.3

Elongaon at brea(%) ASTM d 2671 250

Scant Moulus at 2%

(epane)* (M Pa)ASTM d 2671 137

Heat Shoc 4 hours at 250C (437) ASTM d 2671 No ripping, owing or cracing of outerjacet

dynamic Cut Through (kG) ASTM d 3032

Volume Resistance (ohm-cm ) ASTM d 2671 1.0 1012

Flammability ASTM-d2671 Self-enguishing within 30 secons

Tensile Strength(M Pa) aer aging ASTM d 2671

Oil-resistance: 97# oil at 233 , 24h 1003 , , 1h

IRM 902#

IRM903# No cracing

SIzE OF DWT 3000

P/N

As supplie (mm) Aer recovery

Min. insie

iameter

Ma. insie

iameterTotal wall

Min. ahesive

wall

CB-dWT(3000)-1 5.72 1.27 1.20 0.56

CB-dWT(3000)-2 7.44 1.65 1.52 0.76

CB-dWT(3000)-3 10.85 2.41 1.91 1.02

CB-dWT(3000)-4 17.78 4.45 2.41 1.37


18/33

- 18 -


CBDWTFR HEAT SHRINKABLE DUALWALL TUBING

WITH FLAMERETARDANT ADHESIVE

CB-dWT(FR) is a 4:1, MIL spec, ahesive line, eible,

ame-retarant ahesive an polyolen heat shrin

ual-wall tubing. It is special esigne for automovewire harnesses an features goo mechanical strength,

sealing, oil-resistance an insulaon properes. CB-

dWT(FR) is wiely use for all ins of automove wire

harnesses, an is especially useful in harsh environ-

ments or where special protecon is require.

Standard: UL224, MIL - SAE-AMS-DTL-23053,

F mark, Sony Green partner

SPECIFICATIONS

Specicaons of DWT(FR):Item Specicaons

Shrin Temperature(C) 100C - 150C

Operang Temperature Range(C) -55C - 135C


Elongaon at Brea (%) 200

Raial Shrining Rao (%) 50


Aging in Circulang-Air Oven 158.01.0C, 168hrs

Aer AgingTensile Strength (Mpa) 7.3

Elongaon at brea(%) 100dielectric Strength at 1min, AC2500V No breaown


Flammability VW-1

Water Absorpon (%) Less than 0.4%

Flui Resistance Ecellent

(Copper Corrosion) (No Corrosion)

Soening Point of meltable Liner(C) 1205

Peel Strength of Meltable Liner(N/25mm) >80

SIzE OF DWT FR

SizeAs supplie Aer full recovery

Id (mm) Id (mm) Total Wall Ahesive Wall

7.6 7.6 1.65 1.50.3 0.70

9.0 9.0 2.30 1.50.4 0.70

11.6 11.6 2.54 2.30.4 1.20

17.8 17.8 4.45 2.50.4 1.20


19/33


CBKYNAR175C FLAMERETARDANT PVDF HEAT SHRINKABLE TUBING

CB-kYNAR(175C) is 2:1, MIL Spec, clear, thin wall,

semi-rigi, ame-retarant heat-shrinable tubing

with both high temperature an chemical resistance.

This is especially suitable for applicaons requiring

high temperature performance, outstaning abrasion

resistance an cut-through resistance, or superior

chemical an solvent properes. Provies electrical

insulaon an strain relief of mulpoint connectors

an soler joints. CB-kYNAR(175C) is ieal for appli-

caons that require ense pacing of components or

visual inspecon of covere components.

Standard: UL224, SAE-AMS-DTL25053/8

SPECIFICATIONS

Specicaons of KYNAR(175):

Item Test Metho UnitSpecicaons

For CYG-kYNAR(150C)

Specicaons

For CYG-kYNAR(175C)

Min. Shrin Temperature C 140C 155C

Operaon Temperature Range C -55C ~150C -55C ~175C

Specic Gravity ASTM d792 g/cm3 1.78 1.78

Tensile Strength ASTM d2671 M Pa 30 34.5

Elongaon at Brea ASTM d2671 % 150 150

Elongaon at Brea aer Aging 225,168h % 100 50

Heat Shoc 275,4h - -No Cracing- -No Cracing-Col Ben -55,4h - -No Cracing- -No Cracing-

dielectric Strength ASTM d2671 V/mm 15.7 30

Volume Resistance ASTM d257 .cm 1013 1013

Flammability UL-224 VW-1 Pass Pass

SIzE O F KYNAR 175

Size

Min. insie

iameter as

supplie(mm)

Ma. Insie

diameter

aer recov-

ery (mm)

Recovere

Wall Thic-

ness (mm)

3/64 1.2 0.6 0.25 0.05

1/16 1.6 0.8 0.25 0.05

3/32 2.4 1.2 0.25 0.05

1/8 3.2 1.6 0.25 0.05

3/16 4.8 2.4 0.25 0.05

1/4 6.4 3.2 0.33 0.05

Size

Min. insie

iameter as

supplie(mm)

Ma. Insie

diameter

aer recov-

ery (mm)

Recovere

Wall Thic-

ness (mm)

3/8 9.5 4.8 0.33 0.05

1/2 12.7 6.4 0.33 0.05

4/3 19.1 9.5 0.43 0.08

1 25.4 12.7 0.48 0.08

1 1/2 38.1 19.1 0.48 0.08


20/33

- 20 -


SPECIFICATIONS

CBPTFE HEAT SHRINKABLE TUBING

CB-PTFE is a 1.8:1, MIL Spec, high temperature, highly

ame-retarant PTFE tubing with ecellent chemical

resistance. It is esigne to provie insulaon an me-

chanical protecon in severe chemical an thermal en-

vironments. CB-PTFE is normally use to cover hyrau-

lic hoses an couplings to prevent contaminaon an

corrosion. The high mechanical strength an etremely

low coecient of fricon mae it ieal for reucing

amage to bearing shas an similar applicaons.

Standard: UL224 and MIL - SAE-AMS-

DTL-23053/12

Specicaons of PTFE:Item Test Metho Unit Specicaons

Specic Gravity ASTM d792 g/cm3 2.16

Operang Temperature C -55C to+260C

Min. Melng Temperature: C 327C

Tensile Strength ASTM d638 M Pa 24.5

Elongaon at brea ASTM d638 % 350

Bening Moulus ASTM d790 M Pa 490

Impact Strength ASTM d256+23-54j/m No crac

Harness (shore) ASTM d2240 Shore d 55

Coecient of dynamic Fricon 0.1

Flammability UL-224 VW-1

dielectric Constant 103-106Hz ASTM d150 2.1

dielectric dissipaon

Factor 106Hz ASMT d150 0.0002

Arc Resistance ASMT d495 S >300

Linear Coecient of Epansion ASTM d257 /cm >1018

Weather Resistance Weather-o-meter(2000h) No crac

Flui resistance ASTM d543 Ecellent

Chemical resistance ASTM d543 Ecellent


21/33


SIzE OF PTFE

SIZE

Insie iameterWall thicness Aer

recovery (mm)Min. supplie insieiameter Ma. Recovere insieiameter

AWG 30 0.8 0.38 0.23

AWG 28 0.9 0.46 0.23

AWG 26 1.1 0.53 0.25

AWG 24 1.2 0.66 0.25

AWG 22 1.4 0.81 0.30

AWG 20 1.5 0.97 0.30

AWG 18 1.9 1.17 0.30

AWG 16 2.3 1.47 0.30

AWG 14 3.0 1.83 0.30AWG 12 3.8 2.31 0.30

AWG 10 4.8 2.84 0.30

AWG 8 6.1 3.53 0.38

AWG 6 7.6 4.41 0.38

AWG 4 9.4 5.53 0.38

AWG 2 10.9 6.93 0.38

AWG 0 11.9 8.69 0.38

Stanar Color: Clear (Natural)

*Other colors an sizes are available upon special orer


22/33

- 22 -


CBTTL/S/T PTFE NONHEAT SHRINKABLE TUBING

CB-TT series PTFE is a UL Rate tubing that fea-

tures high temperature (260C) resistance, corro-

sion resistance, ecellent insulaon an mechani-

cal strength properes. This tubing is wiely use

throughout the electrical an chemical inustries,

an its high temperature rang allows aerospace,

military, computer an power transmission appli-

caons. This prouct is UL liste uner le number

E180908. All are F mar.

SPECIFICATIONS

Specicaons of TT:Item Test Metho Unit Specicaons

Specic Gravity ASTM d792 g/cm3 2.16

Tensile strength ASTM d638 M Pa 24.5

Elongaon at brea ASTM d638 % 350

Fleural Moulus ASTM d790 M Pa 490

Impact Strength ASTM d256+23-54j/m -No brea- 107

Harness ASTM d2240 Shore d 55

Coecient of dynamic Fricon 0.1

Melng Point C 327C

Service Temperature 20000h with

50% Retenon Of Elongaon at breaC 260C

Flammability UL-224 VW-1

dielectric Constant At 103-106Hz ASTM d150 2.1

dissipaon Factor At 106Hz ASTM d150 0.0002

Arc Resistance ASTMd495

(Stainless steel electroes) S >300

Volume Resistance ASTM d257 cm >1018

Weather Resistance Weather-o-meter(2000h) No brea

Solvent Resistance ASTM d543 Ecellent

Chemical Resistance ASTM d543 Ecellent


23/33


SIzE OF TT

PTFE Insulaon Tubing

Size Id(mm) Od(mm)AWG MIN NOR MAx CB-TT(S) CB-TT(T) CB-TT(L)

30 0.25 0.30 0.38 0.76 0.76 0.60

28 0.33 0.38 0.46 0.84 0.84 0.68

26 0.41 0.46 0.53 0.92 0.92 0.76

24 0.51 0.56 0.66 1.16 1.06 0.86

23 0.58 0.66 0.74 1.26 1.16 0.96

22 0.66 0.71 0.81 1.31 1.21 1.01

21 0.74 0.81 0.89 1.41 1.31 1.11

20 0.81 0.86 0.97 1.66 1.46 1.16

19 0.91 0.96 1.07 1.76 1.56 1.26

18 1.01 1.07 1.17 1.87 1.67 1.37

17 1.14 1.19 1.32 1.99 1.79 1.49

16 1.29 1.34 1.47 2.14 1.94 1.64

15 1.45 1.50 1.65 2.30 2.10 1.80

14 1.62 1.68 1.83 2.48 2.28 2.08

13 1.83 1.93 2.05 2.73 2.53 2.33

12 2.05 2.16 2.31 2.96 2.77 2.56

11 2.31 2.41 2.57 3.21 3.01 2.81

10 2.59 2.69 2.84 3.49 3.29 3.09

9 2.90 3.00 3.15 4.00 3.76 3.40

8 3.28 3.38 3.53 4.38 4.14 3.78

7 3.65 3.76 3.94 4.76 4.52 4.16

6 4.11 4.22 4.41 5.22 4.98 4.72

5 4.62 4.72 4.95 5.72 5.48 5.22

4 5.18 5.28 5.53 6.28 6.04 5.78

3 5.81 5.94 6.20 6.94 6.70 6.44

2 6.55 6.68 6.93 7.68 7.44 7.18

1 7.34 7.46 7.75 8.46 8.22 7.96

0 8.26 8.38 8.69 9.38 9.14 8.88

Stanar color: clear(natural)


24/33

- 24 -


CBPVC300/CBPVC600 PVC TUBING

CB-PVC300/CB-PVC600 is a UL/CUL Rate PVC e-

ible, ame-retarant, non-heat shrinable tubing

which has ecellent electrical an physical proper-

es, incluing ecellent aci fastness an corrosion

resistance. This tubing is suitable for insulaon use

in automove electronics, terminal lugs, small elec-

trical parts, lea wires of toy motors an transform-

ers etc. This prouct is UL liste uner le number

E180908 for blac, an E250610 for clear. All are F

mar.

SPECIFICATIONS

Specicaon of PVC300/ PVC600:Item Specicaons

Temperature Rang (C) 105C

Longituinal Change 5%

Tensile Strength (MPa) 10.4

Elongaon at brea % 100

Aging in Circulang-air Oven 136.01.0, 168hrs



Potenal Rang (V) 300V, 600V


dielectric Strength (V) 2500(60s),No breaown

Corrosion of Bare Copper No corrosion

Heat Shoc No cracing

Col Ben No cracing


25/33


SIzE OF PVC300/PVC600

AWG size Insie iameter

(mm)

Average Wall-thicness (mm)

For CB-300 For CB-600

5/8 16.00.70.18 0.70.18

9/16 14.3

1/2 12.7

0.570.15

0.570.1

7/16 11.1

3/8 9.53

5/16 7.92

0# 8.38

0.450.1

1# 7.47

2# 6.68

3# 5.94

4# 5.28

5# 4.72

6# 4.22

7# 3.87

8# 3.38

9# 3.00

10# 2.69

0.350.1

11# 2.41

12# 2.16

13# 1.93

14# 1.68

15# 1.50

16# 1.34

17# 1.19

18# 1.07

0.450.1519# 0.96

20# 0.86

21# 0.79

Insie diameter tolerance 5%

Other sizes are available upon special orer.


26/33

- 26 -


CBSGS FIBERGLASS TUBING

CB-SGS series tubing is a UL rate, eible, ame-

retarant, halogen-free an comprise of silicone

resin connuously coate on electrical grae brai-

e berglass tubing. CB-SGS is wiely use in many

consumer appliances, lighng tures, stoves, oven

an furnace controls, relays, breaer panels, switch-

gear an other commercial an inustrial equip-

ment.

Cercaons: UL1441

SPECIFICATIONS

Specicaons of SGS:

Proucts No. dielectric graeMin. Ave.

breaownMin. Iniviual

Operaon

temperature

SGS-15 C-2 1500V 1000V -10C~200C

SGS-25 C -1 2500V 1800V -10C~200C

SGS-40 B 4000V 3000V -10C~200C

SGS-70 A 7000V 5000V -10C~200C

SIZE of SGS Fiberglass Tubing: SGS SERIES are available in size 0.5mm though 25mm.


27/33


CBSRS SERIES FIBERGLASS TUBING

CB-SRS series tubing is a UL rate, eible, ame-

retarant, halogen-free an is coate with silicone

rubber uner high temperature. It has goo electri-

cal insulaon properes an is wiely use in many

consumer appliances, lighng tures, stoves, oven

an furnace controls, relays, breaer panels, switch-

gear an other commercial an inustrial equip-

ment.

Cercaon: UL1441

Remars:

CB-SRS1 is Silicone rubber berglass (ber insie

an rubber outsie)

CB-SRS2 is Silicone rubber berglass (rubber insie an ber outsie)

SPECIFICATIONS

Specicaons of SRS:Proucts No. dielectric grae Min. Ave. breaown Min. Iniviual Operaon temperature

SRS1 A 7000V 5000V -10C~200C

SRS2 A 7000V 6000V -10C~200C

SIZE of SRS: SRS SERIES are available in size 1.0mm though 12mm.

OTHER CYG PRODUCTS AVAILABLE

Laer Style Marer Material Printable Heat Shrin Marer Material on a carrier strip

PET Heat Shrinable Film thin lm use for baery, capacitor an light bulb encapsulaon

Heat Shrinable Bu Splice Connectors Plasc covere heat shrinable splice connectors

Heat Shrinable Bus Bar Tubing Heat shrin use specically for Bus Bars

Nylon Cable Ties

Col Shrin Col shrinable tubing use in power line applicaons

Heat Shrinable Boots Specialize heat shrinable boots an en caps

Many Specialize Heat Shrin applicaon proucts

Please call for addional informaon.


28/33

- 28 -


XD4 Dual Head Heat

Shrink Printer

Prints on both sides

of heat shrink

A4+M Heat Shrink Printer

Prints on one side

of heat shrink

HEAT SHRINK PRINTER

Heat Shrink Printer Ribbons

Black White

HEAT SHRINK RELATED

EqUIPMENT


29/33


FOCUSLITE80

SpecicaonsShrin Length: up to 8.0

Largest Wor Piece diameter: 5/8

Inclues: dimmer Switch, AjustableTimer, Glare Shiel, 6 power cor w/GFCI

Acvaon: Foot peal

Energy Use: 300 was (avg.) / 125VAC

Bulb: Commercial quality Quartz Halogen

Avg. Shrin Time: 2-4 Secons (polyolen)

Ship Weight: 40lbs.

C on ta ct f a ct or yf o r e xa ct d i me ns io ns ands pecification

IN

18.00

8.0

8.50

.625

9.25

FOCUSLITE 10



Includes:dimmer Switch, Ajustable

Timer, Glare Shiel, 6 power cor w/GFCI

Acvaon: Foot pealEnergy Use: 146 was (avg.) / 125VAC



Ship Weight: 20lbs.

FOCUSLITE30



Inclues: dimmer Switch, Ajustable

Timer, Glare Shiel, 6 power cor w/GFCI

Acvaon: Foot peal




Ship Weight: 40lbs.

C on ta ct f a ct or yf o r e xa ct d i me ns io ns ands pecificatio

I

8.90

12.25

9.25

1.00

.625

C on ta ct f a ct or yf o r e xa ct d i me ns io ns ands pecification

IN

8.50

.625

18.00

9.25

2.25

HEAT SHRINK PROCESSING

MACHINES THAT USE HALOGEN

LIGHT SOURCE


30/33

- 30 -


FOCUSLITE 160

SpecicaonsShrin Length: From 1.0 - 16.0


Inclues: dimmer Switch, Ajustable

Timer, Glare Shiel, 6 power cor w/GFCIAcvaon: Foot peal




Ship Weight: 25lbs. to 40lbs.C on ta ct f a ct or yf o r e xa ct d i me ns io ns .ands pecifications

INCH

24.00

8.50

.625

9.25

FOCUSLITEG2


Largest Wor Piece diameter: 1.5

Inclues: dimmer Switch, Ajustable Timer,Glare Shiel, 6 power cor w/GFCI

Acvaon: Foot peal




Ship Weight: 40lbs.

FOCUSLITE G3

HAND HELD

SpecicaonsShrin Length: up to 1.375Largest Wor Piece diameter: 5/8

Inclues: dimmer Switch, Ajustable Timer,

6 power cor w/GFCI

Acvaon: Trigger switch




Ship Weight: 4lbs.

C ont ac tf ac to ry f or e xa ct d i men si ons .ands pecifications

INCH

18.00

9.25

10.25

1.50

C on ta ct f a ct or yf o r e xa ct d i me ns io ns .ands pecifications

INCH

6.50

8.50

1.375

3.59

.55


31/33


SPECIFICATIONS

ULTRAHEAT II

SV 803 - Variable Temperature Heat Gun

STEINELs Ultra Heat II is a variable temperature heat gun featuring 3 airow sengs for maimum usertrol. This moel also has a so grip hanle for comfortable operaon.

SPECIFICATIONS

Item Specicaons

Variable Temperature: Up to 1050F

3-Stage Airow: Cool air, 140F

Low air

High air

Power Cor: Rubber construcon, ouble insulate for safety

Output: 1400 was

Voltage: 120 VAC / 60 Hz

Cercaons: UL/C-UL

Warranty: Full One Year

Item Number: 34103

HB 1750 STEINEL HEAT BLOWERS

Item No. 34750 Moel HB 1750 (Inclues all 5 eys )

34751 HB 1750 B Blower w/ Blue ey

34752 HB 1750 G Blower w/ Gray ey

34753 HB 1750 Y Blower w/ Yellow ey

34754 HB 1750 O Blower w/ Orange ey

34755 HB 1750 R Blower w/ Re ey

dimensions (h w ) 9 1/2 5 9 1/2

Weight 2.4 lbs

Voltage 120 VAC / 60 Hz

Output 1750 WTemperature 200 F - 1200 F (all ve eys )

Airow rate Up to 23 CFM, ajustable with bae

Power cor Inustrial grae rubber, length: 6 .

SPECIFICATIONS

Color key Moel Temperature Ra

HB 1750 200 F - 1200

Blue HB 1750 B 200 F - 300

Gray HB 1750 G 300 F - 500

Yellow HB 1750 Y 500 F - 750

Orange HB 1750 O 750 F - 1000

Re HB 1750 R 1000 F - 1200

HEAT GUNS


32/33

- 32 -



33/33


Documents

Ficha Tecnica Termoencogible