20TH INTERNATIONAL CONFERENCE ON RESEARCH AND EDUCATION IN MECHATRONICS

www.fh-ooe.at/rem2019

23rd – 24th May 2019University of Applied Sciences Upper Austria Wels Campus

REM 2019

PROGRAMME & GUIDEBOOK

2

REM 2019 is held in the city of Wels in Austria, located near Linz, the capital of the state ofUpper Austria, and approx. 120 km from Salzburg and 200 km from Vienna. The REM Conference is a 2-day annual event dedicated to research and education in advanced Mechatronics.The conference is organized by the the University of Applied Sciences Upper Austria in Welsand is promoted by the International Network of Mechatronics Universities with the goal tostimulate the exchange of experiences in Mechatronics research and education.Submit your full paper and participate at the International Conference on Research andEducation in Mechatronics! Especially outstanding papers will be selected as key notes formore detailed elaboration.

All accepted papers will be published in IEEE Xplore!

WELCOME TO THE 20TH INTERNATIONAL CONFERENCE ON RESEARCH AND EDUCATION IN MECHATRONICS

Within this conference the current state-of-the-art and new developments in the following areas will be published:

» Mechatronics systems design » Actuators and motion control » Robotics and applications » Haptic systems » 2D and 3D vision systems » Machine learning » Mechatronic measurement systems » Autonomous vehicles » Transportation and automotive » Modeling and simulation » Systems engineering » Optomechatronics » Human Assist Techn. » Bio/nano-mechatronics » Smart Industry, Industry 4.0 » Mechatronics project education » Trends in teaching mechatronics » Engineering Education (e.g. CDIO) » Mechatronics and Creative Development

Scientific Organising Committee » Reiner Dudziak (Bochum University of Applied Sciences, Germany): Honorary President

» Peter Hehenberger (University of Applied Sciences Upper Austria, Wels/Austria): Conference General Programme Chair

» Hidde Duivenvoorden (The Hague University of Applied Sciences, The Netherlands): Co-Chair

» Mario Jungwirth (University of Applied Sciences Upper Austria, Wels/Austria): Co-Chair

» Krzysztof Kluszczynski (Cracow Universi-ty of Technology, Poland): Co-Chair

3

ORGANISERUniversity of Applied Sciences Upper Austria, Wels Campus In cooperation with the DGM (Deutsche Gesellschaft für Mechatronik e.V.) mechatronics association Germany

VENUEUniversity of Applied Sciences Upper Austria, Stelzhamerstr. 23, 4600 Wels/AustriaConference Language: English

International Programme Committee

» Bradley David (Abertay University Dundee, United Kingdom)

» Choley Jean-Yves (Supméca, France) » Fraanje Rufus (The Hague University of Applied Sciences, The Netherlands)

» Gadeyne Klaas (FlandersMake, Belgium) » Gołdasz Janusz (Cracow University of Technology, Poland)

» Habib Maki (The American University in Cairo, Egypt)

» Hallewell Jean (University of Applied Sciences Upper Austria, Wels, Austria)

» Hammadi Moncef (Supméca, France) » Hanson Mats (KTH Royal Institute of Technology, Sweden)

» Hendorfer Günther (University of Applied Sciences Upper Austria, Wels, Austria)

» Ivakhiv Orest (L‘viv Polytechnic National University, Ukraine)

» Krawczyk Damian (Silesian University of Technology, Poland)

» Le Mair Anita (The Hague University of Applied Sciences, The Netherlands)

» Leitao Paulo (Instituto Politécnico de Bragança, Portugal)

» Lohöfener Manfred (Hochschule Merseburg, Germany)

» Matzka Stephan (Hochschule für Technik und Wirtschaft Berlin, Germany)

» Mersha Abeje Y. (Saxion University of Applied Sciences, The Netherlands)

» Montazeri Allahyar (Lancaster University, United Kingdom)

» Noskievic Petr (VSB-Technical University of Ostrava, Czech Republic)

» Pautzke Friedbert (Hochschule Bochum, Germany)

» Penas Olivia (Supméca, France) » Petit Laurent (Université de Technologie de Compiègne, France)

» Pfeiffer Martin (Hochschule Pforzheim, Germany)

» Pöhlau Frank (Technische Hochschule Nürnberg Georg Simon Ohm, Germany)

» Rabl Michael (University of Applied Sciences Upper Austria, Wels, Austria)

» Roskam Rolf (Ostfalia Hochschule, Germany)

» Schmidt Marco (Hochschule Bochum, Germany)

» Stadlmann Burkhard (University of Applied Sciences Upper Austria, Wels, Austria)

» Tamre Mart (Tallinn University of Technology, Estonia)

» Torbati Mohamed Moshrefi (University of Southampton, United Kingdom)

» Tutunji Tarek (Philadelphia University, Jordan)

» van Duijsen P.J. (Caspoc, The Nether-lands)

» Witters Maarten (FlandersMake, Belgium)

4

Floorplan (Building A)Ground Floor FH

OÖ

Wels C

ampus, B

uilding A, Ground Floor

R3

Aula

PARALLEL SESSIO

NPAR

ALLEL SESSION

HS-010

TRAC

KS

Foyer EG

Main Entrance

Audimax

REG

ISTRATIO

N

Stage, Speaker, Desk, 1 Microfone

HS 7BU

FFETHS 8

LUN

CH

RO

OM

Beverages

HS-009

TRAC

KS

Internet AccessIf internet access required please find an extra sheet providing the access code for the wireless internet connection at the Registrati-on / Information Desk

Registration and Information DeskThe REM registration & information desk will be situated near the main entrance. Occupied: 23rd May: 08:00 am - 06:00 pm24th May: 08:00 am - 05:00 pm

Contact Person during the conferenceNicola Spitzer: +43 664 80484 54106

5

PROGRAMME OVERVIEWThursday 23rd May 201908:00 am – 09:00 am Registration Foyer

09:00 am – 10:30 am Welcome & Keynote Speakers Aula

10:30 am – 11:00 am Coffee Break Foyer

11:00 am – 12:30 pm Paralellsessions I (Track 1 & 2) Aula & HS-009

12:30 pm – 01:30 pm Lunch Break

01:30 pm – 03:00 am Paralellsessions II (Track 3 & 4) HS-009 & HS-010

NUCLEI FINAL CONFERENCE Part 1: The NUCLEI-Approach 01:30 pm – 03:00 pm Aula

03:00 pm – 03:30 pm Coffee Break

03:30 pm – 05:15 pm Paralellsessions III (Track 5 & 6) HS-009 & HS-010

NUCLEI FINAL CONFERENCE Part 2: Trends & Challenges 03:30 pm – 05:15 pm Aula

06:00 pm Bustransfer & Conference Dinner

Friday 24th May 201909:00 am – 10:30 am Paralellsessions IV (Track 7 & 8) HS-009 & HS-010

10:30 am – 11:00 am Coffee Break Foyer

11:00 am – 12:30 pm Paralellsessions V (Track 9 & 10) HS-009 & HS-010

12:30 pm – 01:30 pm Lunch Break Foyer

01:30 pm – 03:15 pm Paralellsessions VI (Track 11 & 12) HS-009 & HS-010

03:15 pm Closing Ceremony & Farewell Party

6

PROGRAMMEThursday 23rd May 2019

08:00 am – 09:00 am Registration

09:00 am – 09:10 am Welcome Address Room: Aula

09:10 am – 09:50 am Scientific Keynote Room: Aula Bioinspired Design: Creativity and Sustainability MAKI HABIB, The American University in Cairo, Egypt

09:50 am – 10:30 am Industrial Keynote Room: Aula Mechatronic product plattforms: an intralogistics case study ALFRED SADLAUER, TGW Mechanics GmbH, Austria

10:30 am – 11:00 am Coffee Break

7

PARALLEL SESSION I 11:00 am - 12:30 pm

Track 1: Mechatronic System Design 1 Chair: J.-Y. Choley Co-Chair: O. Penas Room: Aula

» Robust Backstepping Control for Tracked Vehicles Under the Influence of Slipping and Skidding Mohammad Salah, Ahmad Al-Jarrah; The Hashemite University, JO

» Cascaded LQ and Field-Oriented Control of a Mobile Inverse Pendulum (Segway) with Permanent Magnet Synchronous Machines Fabian Schiffer, Michael Bragard; FH Aachen University, DE

» Orienting product performance improvement: application to mechatronics Pierre Couturier, Abdelhak Imoussaten, Jacky Montmain; IMT Mines Ales, FR

» An Implementation of AutomationML for an Industry 4.0 Case Study: RoboCup@Work Esmaeil Najafi, Tico R.B.H. Laugs, Pablo C. Negrete Rubio, Sjriek H.M. Alers; Fontys University of Applied Sciences, NL

Track 2: Special Session on Project-based Education for Mechatronics Chair: M. JungwirthCo-Chair: J. Hallewell Haslwanter Room: HS-009

» Using State-of-the-Art Methodological Approaches to Enhance Interdisciplinary Synergies in STEM Subjects Mathew Docherty, Kurt Gaubinger; University of Applied Sciences Upper Austria, AT

» Involving Mechatronic Students in Business Innovation using Project-Based Learning: a case-study Moncef Hammadi, Mohamed El-Idrissi, Régis Plateaux, Olivia Penas, Antoine Lanthony; Supmeca, FR | Ilmars Viksne; Riga Technical University, LV

» Building a self-driving and self-following robot (towards project based learning in a part time study program) Markus Jäger, Harald Kirchsteiger, Franz Auinger, Mario Jungwirth; University of Applied Sciences Upper Austria, Campus Wels, AT

» A Novel Design of Virtual Laboratory Luis Soriano, Pedro Ponce, Arturo Molina, ITESM, MX

12:30 am – 13:30 am Lunch Break

8

PARALLEL SESSION II 01:30 pm - 03:00 pmTrack 3: Robotics and Applications Chair: E. Najafi Room: HS-009

» Inverse Dynamics of an Industrial Robot using Motion Constraints Thomas Lauß, Stefan Oberpeilsteiner, Karim Sherif, Wolfgang Steiner; University of Applied Sciences Upper Austria, AT

» PSO-based Algorithm for Inverse Kinematics Solution of Robotic Arm Manipulators Alkayyali, Malek; Tutunji, Tarek A.; Philadelphia University, JO

» Model-based industrial robot programming with MATLAB/Simulink Jan Rehbein, Tim Wrütz, Rolf Biesenbach; Hochschule Bochum, DE

» How Recognition of Human Facial Expression can be incoporated in Robot Control Naoya Hasegawa, Yoshihiko Takahashi; Kanagawa Institute of Technology, JP

Track 4: Mobile Vehicles Chair: M. Edin Grimheden Room: HS-010

» Controlling a Skid-Steered Tracked Mobile Robot with Slippage Using Various Control Schemes Ahmad Al-Jarrah, Mohammad Salah, Fadwa Almomani; The Hashemite University, Hashemite Kingdom of Jordan, JO

» Vision-based Detection of Road Users and Infrastructure Elements for Automated Driving Stefan Müller-Schneiders; Bochum University of Applied Sciences, DE

» A Potential Field Simulation Study for Mobile Robot Path Planning in Dynamic Environments Mohammad Hamdan Garibeh, Nathir A. Rawashdeh; German Jordanian University, JO Mohammad Abdel Kareem Jaradat, American University of Sharjah, JO

» Sensor fusion of odometry and a single beacon distance measurement Rufus Fraanje, Fidelis Theinert, Bolte, John; The Hague University of Applied Sciences, Delft, NL | René Beltman; Lely, Maassluis, NL | Michiel van Osch, Teade Punter; Fontys, Eindhoven, NL

NUCLEI FINAL CONFERENCE Part 1: 01:30 pm -03:00 pm The NUCLEI-Approach Room: Aula

03:00 am – 03:30 am Coffee Break

9

PARALLEL SESSION III 03:30 pm - 05:15 pm Track 5: Special Session on Mechatronics and Creative DevelopmentChair: Maki K. Habib Room: HS-009

» Realization of a Small IIoT Node. A Greenfield Approach Horatiu Pilsan, Robert Amann, Markus Gerstenberg; FH Vorarlberg, AT

» Design of a Two-Tier WSN-based IoT Surveillance System with Cloud Integration Chimsom Isidore Chukwuemeka, Maki K. Habib; Robotics, Control and Smart Systems, The American University in Cairo, EG

» Industry 4.0: Sustainability and Design Principles Maki K. Habib, Chimsom Isidori Chukwuemeka; The American University in Cairo, EG

» Design and Control of Electromagnetic System Naviganting micro/nano Robots Mostafa Abdelaziz, Maki K. Habib; American University in Cairo (AUC), EG

» 50 years of Mechatronics - what’s next? Martin Edin Grimheden; Elias Flening; KTH, SE

Track 6: Mechatronic System Design 2Chair: A. Sadlauer Room: HS-010

» Simulation Tool for Lightweight Pedal-driven Vehicles Lennard Brunnert, Gerhard Edmound Stebner; Ostfalia University of Applied Sciences – Hochschule Braunschweig/Wolfenbüttel, DE

» Using the method of pairwise comparisons for the multifactor selection of infographics design alternatives Oleksandr Tymchenko; University of Warmia and Mazury , PL Svitlana Vasiuta, Orest Khamula, Olha Sosnovska; Ukrainian Academy of Printing, PL Marek Dudzik; Cracow University of Technology, PL

» Ecodesign Methods for Mechatronic Systems: A Literature Review and Classification Simon Merschak, Peter Hehenberger; University of Applied Sciences Upper Austria, AT

» A semantic dictionnary to support multidisciplinary design collaboration in an extended enterprise context Régis Plateaux, Olivia Penas; Supmeca, Laboratoire Quartz, EA7393, FR Matthieu Bricogne, Julia Guerineau; UTC, Laboratoire Roberval, FRE UTC-CNRS 2012, Sorbonne universités, FR | Harvey Rowson, DeltaCAD, FR | Kevin Maquin; Digital Product Simulation, FR

10

» Product-Process MBSE and Dysfunctional Analysis Approach Applied to a Production Line Mourad Chibane, Faïda Mhenni, Jean-Yves Choley; Supméca, FR

NUCLEI FINAL CONFERENCE Part 2: 03:30 pm -05:15 pm Trends & Challenges Room: Aula

06:00 pm & 06:30 am Buses to the Conference Dinner

07:00 pm Conference Dinner

10.00 pm & 10.30 pm Busses back

11

PROGRAMMEFriday 24th May 2019

PARALLEL SESSION IV 09:00 am - 10:30 am Track 7: Special Session on Mechatronics and Creative DevelopmentChair: J. Hallewell Haslwanter Co-Chair: M. Docherty Room: HS-009

» Introducing an Inverted Classroom Concept for an Undergraduate Course in Power Electronics – Implementation, Evaluation and Experiences Burkhard Ulrich, DHBW Stuttgart Campus Horb, DE

» Introducing a Cross-University Bachelor‘s Programme with Orientation Semester - Enabling a Permeable Academic Education System Michael Bragard, Maike Schneider; FH Aachen University, DE Maike Sube; Christoph Jungemann; RWTH Aachen University, DE

» Research Skills Enhancement through Research-Based Wit Learning Methodology Luis Ibarra, Arturo Soriano, Pedro Ponce, Arturo Molina; Tecnologico de Monterrey, MX

» Redesigning an Introductory Programming Lecture for Mechatronics Students Jean D. Hallewell Haslwanter; University of Applied Sciences Upper Austria, AT

Track 8: Mechatronics Special Topics 1Chair: H. Duivenvoorden Room: HS-010

» Single Axis Attitude Controller Design Using Pulse Width Modulated Thruster Yusuf Silik, Roketsan Inc., TR; Ulas Yaman, Middle East Technical University, TR

» Data Acquisition for Simulation Based Predictive Energy Calculation Martin Hellwig, Stefan Rohkämper, Wolf Ritschel; University of Applied Sciences Bochum, DE

» Optimal Q-Learning Approach for Tuning the Cavity Filters Even Sekhri, Mart Tamre; Tallinn University of Technology, Estonia Rajiv Kapoor; Delhi Technological University, New Delhi, IN

» User-Friendly Programming of Flexible Assembly Applications with Collaborative Robots Witters, Maarten; Tirmizi, Asad; De Cat, Broes; Janssen, Karel; Pane, Yudha; Leconte, Patricia; Flanders Make, BE

12

Track 10: Session Mechatronics Special Topics 2Chair: L. Ibarra Room: HS-010

» Magnetostatic Study of a Dual-Gap MR Valve Janusz Gołdasz, Cracov University of Technology, PL

» Generalized model of hybrid three-module launcher allowing for different configurations Part 1: General simulation studies Krzysztof Kluszczynski, Tomasz Makowski, Cracow University of Technology, PL

» AHRS based anti-sway tower crane controller Dawid Kruk, Maciej Sułowicz; Cracow University of Technology, PL

» Model-based Multi-Attribute Collaborative Production Cell Layout Optimization Pieter Lietaert, Niels Billen, Sofie Burggraeve; Flanders Make, BE

10:30 am – 11:00 am Coffee Break

PARALLEL SESSION V 11:00 am - 12:30 pmTrack 9: Actuators and Motion controlChair: R. Roskam Room: HS-009

» An Adaptive Charge Estimator for Piezoelectric Actuators, a Radial Basis Function Approach Morteza Mohammadzaheri, Mohammadreza Emadi, Hamidreza Ziaiefar, Mojtaba Ghodsi, Issam Bahadue, Ashraf Saleem, Musaab Zarog; Sultan Qaboos University, OM

» Identification of Linear Hydraulic Actuator using Self-excited Oscillations Petr Noskievic; VŠB-Technical University of Ostrava, CZ

» A model-based approach to enhance performance in high-end laser-positioning systems Edward Kikken, Nathan Dwek, Merwan Birem, Abdellatif Bey-Temsamani, Anke Van Campen; Flanders Make, BE

» Modeling and Master-Slave Control of an Upper-Limb Exoskeleton Suit Driven by Pneumatic Muscles Ghaith Aljallad, Yousef Qafisheh, Jumana Mahmoud Abu-Khalaf; German Jordanian University, JO

13

12:30 am – 13:30 am Lunch Break

PARALLEL SESSION VI 01:30 pm - 03:15 pmTrack 11: Measurement systemsChair: T. Tutunji Room: HS-009

» Assessment of Convergence of the Algorithm for Determining the Upper Bound of Dynamic Error on the Example of Acceleration Sensors Krzysztof Tomczyk; Cracow University of Technology, PL

» Influence of Illumination Sources on Hyperspectral Imaging Ali Zahavi, Andrei Palshin, Dhanushka Chamara Liyanage, Mart Tamre; Tallinn University of Technology, EE

» An autonomous and self-locating handling device for reverse engineering systems Ferdinando Vitolo, Andrea Rega, Stanislao Patalano, Antonio Lanzotti; Fraunhofer J-Lab IDEAS, Dept. of Industrial Engineering University of Naples Federico II, IT

» The Use of Artificial Neural Networks to Solve the Problem of Settings for Circulation of Self-Circulators in Booklet Collectors Oleh Kazmirovych; Ukrainian academy of printing, Lviv, UA Adam Jagiello; Cracow University of Technology, PL

Track 12: Modelling and SimulationChair: P. Noskievic Room: HS-010

» Effect of Magnetostrictive Properties on the Performance of Velocity-Driven Harvester Mojtaba Ghodsi, Morteza Mohammadzaheri, Hamidreza Ziaiefar, Amur Al-Yahmedi; Sultan Qaboos University-Oman, OM

» Model Reduction of A Real Time Multidisciplinary Mechatronic System Haiyan Henry Zhang, Qiong Li; Purdue University, US

» Design and modeling of SRM for scooter application Adam Warzecha, Dominik Rudek, Tomasz Wegiel; Cracow University of Technology, PL

» MR multi disc clutches - construction, parameters and field model. Krzysztof Kluszczynski, Zbigniew Pilch; Cracow University of Technology, PL

» Implementation Challenges in Transition of a Sequential Real Time Embedded Application to a Real Time Operating System Kashif Shahzad, Muhammad Zeeshan, Muhammad Waqas Khan; NUST College of EME, PK

03:15 pm & 03:45 am Closing Ceremony Room: Aula

03:45 pm Farewell Party

14

Conference DinnerThursday, 23-- May 2019The University of Applied Sciences Upper Austria invites you to a traditional Austrian farmhouse „Moar in Grünbach“ where you may enjoy a delicious dinner providing you with the perfect environment in a relaxing pleassant atmosphere to network and have interesting conversations with your companions.

Shuttle Transfers We have organised a shuttle transfer to take you to and from the venues. Do not miss it!

SOCIAL PROGRAMME

ADDRESS CONFERENCE DINNERGrünbach 13, 4623 Gunskirchen

Shuttle to Moar in Grünbach » Bus 1: ~ 06.00 pm» Bus 2: ~ 06.30 pm

Shuttle back to conference venue » Bus 1: ~ 10.00 pm» Bus 2: ~ 10.30 pm

Pho

tos:

Moa

r in

Grü

nbac

h

15

A | Hotel Bayrischer Hof *** & Hotel Alexandra ****Doktor-Schauer-Strasse 21-23 | 4600 Wels, Austria

B | Hotel KremsmünstererhofStadtplatz 62-63 | 4600 Wels, Austria

C | Hotel Best Western Ploberger GmbHKaiser-Josef-Platz 21 | 4600 Wels, Austria

ACCOMMODATION

Hotel Alexandria

Hotel Kremsmünstererhof

Hotel Ploberger

A

B

C

Map

FH Upper Austria

CONFERENCE VENUEFH Upper AustriaStelzhamerstraße 234600 Wels

16

Venue & AccommodationThe conference will be held at the University of FH Upper Austria Wels Campus – Stelzhamer-straße 23 in 4600 Wels. Accommodations have been reserved with special rates for your convenience. You will find relevant contact details and full information on our conference website: https://www.fh-ooe.at/en/kongresse/2019/rem-2019/accommodation/

ParkingUnderground parking of FH Upper Austria Wels Campus is possible but limited. Therefore further parking is available in the Traunparkgarage or at underground parking Kaiser-Josef-Platz. Further parking with costs is available in the Traunpark garage or at underground parking Kaiser-Josef-Platz (see map on the back-side). For the Wels Campus underground parking there are free parking-exit-tickets available at the registration desk.

Currency and BankingThe official currency of Austria is Euro (EUR, €). Therewith, Austria belongs to the 19 European countries that use the common European money. Banks are located in the surrounding of the congress area. Opening hours (depend on the Bank): >> Monday-Friday: 09:00 am - 12:00, 02:00 pm - 03:00 pm>> Saturday and Sundays: closed

ATMYou may find ATMs within a bank or right outside of the bank building. Entering a bank during closing hours is usually possible with bank cards with a chip. In order to find an ATM see the sign underneath. ATMs closest to the cogress area:>> Wels Campus, Outside Entrance Building A>> Volksbank Wels, Pfarrgasse 5>> Raiffeisenbank Wels, Kaiser-Josef-Platz 58

Power and Electrical PlugsElectricity is 220-230V, 50 Hz. – Austrian plugs have two round pins.

Calling Codes >> Austria country code : +43 (or 00 43) >> Wels: +43 (0)7242

IMPORTANT INFORMATION

Pho

tos

© F

H U

pp

er A

ustr

ia, i

mb

ilde.

at B

. Pla

nk

CONTACTNicola Spitzer Phone: +43 5 0804 54106 E-mail: congress@fh-ooe.at

Peter HehenbergerPhone: +43 5 0804 43265E-mail: peter.hehenberger@fh-wels.at

17

Emergency Numbers>> European Emergency Number 112>> Austrian Police Department 133>> Austrian Ambulance 144>> Austrian Fire Department 122

Climate and ClothingIn May the season of warmer temperatures begins in Austria. We may characterise the weather as comfortable with plenty of sunsine and occasional rain shower. So dont forget your rain jacket. The average temperature is around 15°C.

Store Opening HoursThe opening hours of shops vary in Austria. Mostly though, the opening hours during the week are Monday – Friday, from 09:00 am - 06:00 pm and on Saturday, they are open until 01:00 pm or 05:00 pm. Smoking areaNo smoking in public buildings (e.g. airports, train stations, schools, universities, government administration buildings) and on public transport (e.g. trains). At the conference venue you may smoke in the inner courtyard of the Wels Campus. In general smoking is allowed in restaurants, bars and cafes, if there are seperated smoking and non-smoking areas.

Pharmacies in WelsSTERNapotheke: www.sternapotheke.at>> Bahnhofstraße 11 | Phone: +43 (0)7242 46711>> Open: Mon-Fri: 8:30 am to 06:00 pm, Sat 8:30 am to 12:30Einhorn-Apotheke: www.einhorn-apotheke.at>> Plobergerstraße 7 | Phone: +43 (0)7242 464880>> Open: Mon-Fri 8:30 am to 06:00 pm, Sat 8:30 am to 12:00

Attractions in WelsShould you be intersted in seeing touristic sights please visit the following websites for more information: www.wels.at

Public BusWels has a tight bus route network. Intersection of all bus routes is the traffic island at the Kaiser-Joseph-Platz. For more information on bus schedules see www.liniewels.at/de/stadtlinien and +43 (0)7242 / 44 212.

Cabs>> City Taxi Wels: +43 (0)7242 / 911 811 >> Funktaxi Wels: +43 (0) 7242 / 234>> Hailed shared taxi: +43 (0)7242 / 20 69 69

18

SMART AUTOMATION MAKEATHON

On the 24 May 2019, the NUCLEI Project organizes it́ s first SMART AUTOMATION MAKEATHON in Wels.

Would you like to create and invent your own innovative idea focused on IoT, Robotics, Automation and Connected Systems???

Then join us now and be part of our INNOVATION NETWORK COMMUNITY!

When? 24 May 2019 Time? From 09:00 till 18:00 Where? Campus Wels, 4600 Wels, AustriaLocation? Room C|HS-106, Stelzhamertrasse 23

GET MORE INFORMATION & JOIN US NOW!

www.itq.de/smart-automation-makeathon

CREATE, MAKE & HAVE FUN!

19

SMART AUTOMATION MAKEATHON

On the 24 May 2019, the NUCLEI Project organizes it́ s first SMART AUTOMATION MAKEATHON in Wels.

Would you like to create and invent your own innovative idea focused on IoT, Robotics, Automation and Connected Systems???

Then join us now and be part of our INNOVATION NETWORK COMMUNITY!

When? 24 May 2019 Time? From 09:00 till 18:00 Where? Campus Wels, 4600 Wels, AustriaLocation? Room C|HS-106, Stelzhamertrasse 23

GET MORE INFORMATION & JOIN US NOW!

www.itq.de/smart-automation-makeathon

CREATE, MAKE & HAVE FUN!

SMART AUTOMATION MAKEATHON

08:15 – 09:00 Registration 09:00 – 09:15 Welcome speech09:15 - 09:45 Presentation of the challenge09:45 - 10:15 Team building (4 or 5 teams)10:15 - 10:30 Presentation of the teams10:30 - 10:45 “How to pitch” presentation

10:45 - 11:00 Coffee break

11:00 - 11:20 Prototyping speech11:20 - 15:00 Development of prototypes

12:30 - 13:30 Lunch

15:00 - 17:00 Finishing prototypes & presentations 17:00 - 17:45 Presentation of the prototypes17:45 - 18:00 Concluding words

Parallel from 11:00 – 17:00

Quick instructions on technologies and software for students!

All required material will be available — Just bring your laptop!

HAGENBERG | LINZ | STEYR | WELS

University of Applied Sciences Upper AustriaSchool of Engineering

Stelzhamerstraße 234600 Wels/AustriaPhone: +43 5 0804 43265peter.hehenberger@fh-wels.atwww.fh-ooe.at/campus-wels

Villach

Innsbruck

Graz

Salzburg

Hagenberg

EnnsVIENNA

SteyrWels

Linz

A1

A9A12

A10

A8

A2

FH OÖWels Campus

PassauEXITWels NORD

Direction Wels(EXITWels OST)

Direction Linz

Direction SattledtSalzburg/Wien/Graz

Public garageTraunpark

PublicgarageKJ-Platz

Kaiser-Josef-PlatzStelzhamerstr.

Roseggerstr.

Dr.-S

chauer-Str.

Magazinstr.

Hans-Sachs-Str.

Linzer Straße

A1 A9

A25

A25

Herrengasse

Ringstr.

Roseggerstr.

Bahnhofstr.

Pfarrgasse

Rainerstr.

Karl-Loy-S

tr.

Linzer Straße

RAILWAYSTATION

CITY

Bus-station

Railway station

Ad

lerstr.

B1

B1

B137

B1

B1

B138

Busstation

© F

H U

pp

er A

ustr

ia