8
Facing for Facing for Unfaced Batts Unfaced Batts

Facing for Unfaced Batts. Where will I see applications of Facing for Unfaced Batts, requiring Class A (Flame Spread of 25 or less) ratings? Educational,

Embed Size (px)

Citation preview

Page 1: Facing for Unfaced Batts. Where will I see applications of Facing for Unfaced Batts, requiring Class A (Flame Spread of 25 or less) ratings? Educational,

Facing for Unfaced BattsFacing for Unfaced Batts

Page 2: Facing for Unfaced Batts. Where will I see applications of Facing for Unfaced Batts, requiring Class A (Flame Spread of 25 or less) ratings? Educational,

Where will I see applications of Facing for Unfaced Batts, requiring Class A (Flame Spread of 25 or less) ratings?

Educational, Retail, Office…other Commercial Buildings; in Plenum Area and wall applications.

What is the typical solution provided by Architects?

FSK-faced Batts

Facing for Unfaced Batts

Page 3: Facing for Unfaced Batts. Where will I see applications of Facing for Unfaced Batts, requiring Class A (Flame Spread of 25 or less) ratings? Educational,

What is FSK Shield Insulation Facing?

Unfaced fiberglass and

Fi-Foil’s FSK Shield™ is lower

cost and more readily available

than FSK-faced Batts

FSK stands for Foil Scrim Kraft or aluminum foil bonded to kraft paper with a flame retardant adhesive and reinforced with fiberglass scrim.

Page 4: Facing for Unfaced Batts. Where will I see applications of Facing for Unfaced Batts, requiring Class A (Flame Spread of 25 or less) ratings? Educational,

FSK Shield was tested with R11, R19, and R30 unfaced batts in accordance with ASTM E-84.Primarily to provide a lower-cost alternative to FSK-faced batts, as well as, meet Class A (Flame Spread of 25 or less) requirements in ceiling and wall applications.

It is also used to insure that unfaced fiberglass batt insulation is fully aligned with the air barrier or drywall.

FACING FOR UNFACED BATTS FACING FOR UNFACED BATTS WALL APPLICATIONWALL APPLICATION

When and where is it used?

Page 5: Facing for Unfaced Batts. Where will I see applications of Facing for Unfaced Batts, requiring Class A (Flame Spread of 25 or less) ratings? Educational,

When you substitute FSK Shield + Unfaced Batts, for FSK-faced Batts…

Save MONEY and TIME Save MONEY and TIME TOTAL COST SAVINGS = 22%*

*Note: Example is based on Retail Pricing for all products.

Page 6: Facing for Unfaced Batts. Where will I see applications of Facing for Unfaced Batts, requiring Class A (Flame Spread of 25 or less) ratings? Educational,

Another Benefit: VAPOR RETARDER

ASTM E-96 Water Vapor Permeance of 0.02

Can be used as an effective vapor retarder.All seams should be taped with Fi-Foil’s FSK Tape.

Building Standard in:

Page 7: Facing for Unfaced Batts. Where will I see applications of Facing for Unfaced Batts, requiring Class A (Flame Spread of 25 or less) ratings? Educational,

Thermal Performance

The Low Emittance High Reflective surface facing an Air Film adds R-value to the insulation system

• Ceilings: R- 4.6

• Walls: R- 1.7Reference: Surface Conductances and Resistances for Air, ASHRAE Fundamentals Handbook.

Page 8: Facing for Unfaced Batts. Where will I see applications of Facing for Unfaced Batts, requiring Class A (Flame Spread of 25 or less) ratings? Educational,

Another Solution: PLENUM AREA APPLICATION

FSK Shield™ can be installed in the Plenum Area as FACING FOR UNFACED BATTS or as a facing for Fi-Foil’s Masonry Wall insulation - AA2 Vapor Shield, to achieve a Class A rating.

A Plenum Area is often the air return for an air conditioning system. In some buildings, the area above a drop ceiling is used as the air return (source of air) for the air conditioning.