Fabricators Gear 2017 - Supagassupagas.com.au/wp-content/uploads/2017/08/FabGear... · Fabricators Gear 2017 ... MIG: 25 – 200A, TIG: 10 - 200A, STICK: 10 - 200A Input Power Lead

FabGear quality products are especially designed for the Metal Fabrication, Welding, Sheetmetal and Engineering trades.

Fabricators Gear 2017

abMASK©©

abGLOVE©©

©©

®®

®®

abPLAS®®

©abDISC©

abPROTEC©©

©©

abSPEC©©

®®

®®

©©

abFLASH©

ab ab

w w w. f a b g e a r . c o m . a uGear

Gear

®

2

Index

Machine Quick Selector Chart ..............................................................................................................................................................Page 3

Multi Process (MIG/STICK/TIG - MST) Machines .............................................................................................................................. Page 4 - 5

GMAW (MIG) Machines .................................................................................................................................................................. Page 6 - 7

FabFINISH ..........................................................................................................................................................................................Page 7

PAC (PLASMA) Machines .....................................................................................................................................................................Page 8

MMAW (STICK) Machines and Products ................................................................................................................................................Page 9

GTAW (TIG) Machines and Products ........................................................................................................................................... Page 10 - 11

MultiLINERS ......................................................................................................................................................................................Page 12

FabDISCS .........................................................................................................................................................................................Page 13

FabWIRE ..........................................................................................................................................................................................Page 14

FabROD ................................................................................................................................................................................... Page 14 - 15

FabSAFE ....................................................................................................................................................................................Page 15, 19

FabGLOVE Welding Gloves and General Gloves ........................................................................................................................... Page 16 - 17

FabSHIELD Welding Helmets ...................................................................................................................................................... Page 18 - 19


ab ab


Gear

®

3

Machine Quick Selector

®abARC 185i LT Stick & Lift-TIG Inverter Welder

MMAW (STICK)

®abPLAS 15.20 Air Plasma Cutter

®abPLAS 14.18 Combi Inbuilt Compressor

Plasma Cutter

PAC (PLASMA)

®abTIG Mini 200P AC/DC Pulse TIG

Welder

®abTIG Midi 203P AC/DC Pulse TIG

Welder

GTAW (TIG)

abMIG 200i Inverter MIG Welder


GMAW (MIG)

Multi Process (MST)


©MultiARCMIG•STICK•TIG Mini

195i MST Inverter Multi Process Welder

©MultiARCMIG•STICK•TIG 205i MST

Inverter Multi Process Welder

©MultiARCMIG•STICK•TIG 255i MST Inverter Multi Process Welder

Wireless RemoteTechnology

Built in

with Wireless Remote

Technology

®abTIG Maxi 320P AC/DC Pulse TIG Welder


with Wireless Remote

Technology

P/C FG205iMST

S/C 11205

©MultiARCMIG•STICK•TIG 205i MST

Inverter Multi Process Welder

©MultiARCMIG•STICK•TIG Mini 195i MST Inverter

Multi Process Welder

P/C FG195iMST

S/C 11195

Welding Processes MIG, STICK and LIFT TIG-DC

Amperage Range (MIG)MIG: 25 – 200A, TIG: 10 - 200A, STICK: 10 - 200A

Input Power Lead & Plug supplied for commissioning only!

240 Volt 2.5mm2 with 15A Plug Top

Supply Current (I1eff

) 14.9A in MIG, 18.5A in STICK

Recommended Fuse for Maximum Current & Duty Cycle

20A

Duty Cycles @ 40OC200 Amps @ 40%, 165 Amps @ 60%, 130 Amps @ 100%

Recommended Maximum Welding Thickness 12mm Fillet or Butt

Wire Size Range 0.6 - 1.0mm Steel, 0.9 - 1.0mm Alloy

Warranty Period 2 Years

Weight & Dimensions (LxWxH) 16Kg & 505mm x 210mm x 330mm

• Built-in Synergic programs for Aluminium, Stainless and Mild Steel

• Spool Gun compatible (sold separately)

• EcSET for quick and easy Electronic Control Setting

• 200 Amp maximum output• Multi Process; MIG, STICK and Lift TIG-DC• Intuitive Colour LCD interface• LCD Digital screen, easy to use• Adjustable Burn Back control• 2T/4T Trigger Selection• Wire Inch and Gas Check Controls• MIG/TIG Pre & Post Flow Gas Controls• TIG Downslope Time Control• STICK Hot start & Arc Force Controls• 1Kg or 5Kg Wire Spools• Fan Cooled• Gas or Gasless operation• Quick Fit Euro MIG Gun Connection• Creep-feed (slow run in speed) for soft starts in MIG with no lumps• Optional TIG Torch allows control of Pre/Post Flow and Downslope• Supplied with MIG-Gun, Electrode Holder and Lead, Earth Clamp and Lead,

plus Argon Gas Regulator• Heavy Duty Metal 2-Roll Drive system • Comprehensive Owner’s Manual






) 14.9A


15A






• The smallest Multi Process MST machine on the market

• Mini in size, but packs awesome welding power

ab ab


Gear

®

4

Approximately 2 Coke cans high x 3-cans wide!

240V

Single Phase

AC240V

Single Phase

AC

• 200 Amp maximum output• Multi Process; MIG, STICK and Lift TIG-DC• 200A in MIG, 170A in TIG/MMA• Welds Steel, Aluminium and Stainless• Digital Amp & Volt Meters• Latest Inverter Technology• Basic controls, easy to use• Quick Fit Euro MIG Gun Connection• 1Kg or 5Kg Wire Spools• Fan Cooled• Gas or Gasless operation• Metal 2-Roll Drive system• Ideal for light commercial and maintenance work• Simple to use, with an easy set up guide provided• Supplied with spare Feed-Rollers to enable MIG Welding of all metals• Light weight and easy to carry, even with MIG Wire installed• Excellent welding results on pipes, tube, RHS & SHS• Supplied with MIG-Gun, TIG-Torch, Electrode Holder and Lead, Earth Clamp

and Lead, plus Argon Gas Regulator • Comprehensive Owner’s Manual

©MultiARCMIG•STICK•TIG

©

Spool Gun(sold separately)

10mm

Recommended PlateThickness (Max)

W

AR R A N

TY2

YEARW

AR R A N

TY

240 Volt

15A

For Maximum Output

12mm


W

AR R A N

TY2

YEARW

AR R A N

TY

240 Volt

20A

For Maximum Output


P/C FG255iMST

S/C 11255

©MultiARCMIG•STICK•TIG 255i MST Inverter Multi Process Welder

with EcSET for quick and easy Electronic Control Setting






) 19.9A in MIG, 20.6A in STICK


25A






16mm


• Supplied with Synergic and Basic Controls

• Save over 50 User Programs

• Spool Gun compatible (sold separately)

• EcSET for quick and easy Electronic Control Setting

• 250 Amp maximum output• Multi-process; MIG, STICK and Lift TIG-DC• Digital Amp & Volt Meters• Synergic & Basic controls, easy to use• Fine Tuning (Inductance) control• Adjustable Burn Back control• 2T/4T Trigger Selection• Wire Inch Control• Gas Check Control• MIG/TIG Pre & Post Flow Gas Controls• TIG Downslope Time Control• STICK Arc Force Control• Creep-feed (slow run in speed) for soft starts in MIG with no lumps• Quick Fit Euro MIG Gun Connection• 5Kg or 15Kg Wire Spools• Welds Steel, Aluminium and Stainless• Fan Cooled• Gas or Gasless operation

• Supplied with MIG-Gun, Electrode Holder and Lead, Earth Clamp and Lead, plus Argon Gas Regulator

• Heavy Duty Metal Geared 4-Roll Drive system • Comprehensive Owner’s Manual

W

AR R A N

TY2

YEARW

AR R A N

TY

ab ab


Gear

®

5

240V

Single Phase

AC

©MultiARCMIG•STICK•TIG

©

Spool Gun(sold separately)

Inside of machine

240 Volt

25A

For Maximum Output


• 200 Amp maximum output• Compact & lightweight• Digital Amp & Volt Meters• Latest Inverter Technology• Basic controls, easy to use• Fine Tuning (Inductance) control• Adjustable Burn Back control• 2T/4T Trigger Selection• Quick Fit Euro MIG Gun Connection• 1Kg or 5Kg Wire Spools• Welds Steel, Aluminium and Stainless• Fan Cooled• Gas or Gasless operation• Supplied with MIG-Gun, Earth Clamp and Lead, plus Argon Gas Regulator• Heavy Duty Metal 2-Roll Drive system • Comprehensive Owner’s Manual

ab ab


Gear

®

P/C FG230iMIG

S/C 11230



P/C FG200iMIG

S/C 11200

Welding Processes Gas Metal Arc Welding (MIG)

Amperage Range (MIG) 40 – 200 Amps




) 18.6A


20A

Duty Cycles @ 40OC for MIG200 Amps @ 30%, 145 Amps @ 60%, 110 Amps @ 100%





• 230 Amp maximum output• Portable MIG with grunt!• Digital Amp & Volt Meters• Latest Inverter Technology• Basic controls, easy to use• Fine Tuning (Inductance) control• Wire Inch Control• Gas Check Control• Quick Fit Euro MIG Gun Connection• 5Kg or 15Kg Wire Spools• Welds Steel, Aluminium and Stainless• Fan Cooled• Gas or Gasless operation• Supplied with MIG-Gun, Earth Clamp and Lead, plus Argon Gas Regulator• Heavy Duty Metal 2-Roll Drive system • Comprehensive Owner’s Manual






) 24.7A


25A






• Basic Controls for repeatable easy to use, day-in day-out welding!

• Rugged Reliability!

• Generator Friendly!

• Basic Controls for repeatable easy to use, day-in day-out welding!



6

240V

Single Phase

AC240V

Single Phase

AC

®®

14mm


W

AR R A N

TY2

YEARW

AR R A N

TY

240 Volt

25A

For Maximum Output

12mm


W

AR R A N

TY2

YEARW

AR R A N

TY

240 Volt

20A

For Maximum Output


ab ab


Gear

®

7

®®

P/C FG260iMIG

S/C 11260


• 250 Amp maximum output• Portable MIG with grunt!• Digital Amp & Volt Meters• Latest Inverter Technology• Basic controls, easy to use• Fine Tuning (Inductance) control• Wire Inch Control• Gas Check Control• Quick Fit Euro MIG Gun Connection• 5Kg or 15Kg Wire Spools• Welds Steel, Aluminium and Stainless• Fan Cooled• Gas or Gasless operation• Supplied with MIG-Gun, Earth Clamp and Lead, plus Argon Gas Regulator• Heavy Duty Metal Geared 4-Roll Drive system • Comprehensive Owner’s Manual






) 27.9A


32A






• Heavy Duty welding from 240v single phase, with a high duty cycle: 250A @ 50%!



240V

Single Phase

AC

P/C FGFINISH.EP

S/C 14143

• Invented to clean & passivate, polish and mark (etch) on most austenitic & ferritic grades of stainless steels

• Can be used to clean up most welds made on Stainless Steel with the MIG, STICK or TIG processes

• Sealed cabinet construction designed to keep dust and moisture out of harm’s way to IP54 level

• No more pickling paste – easy water-based clean-up for a safer environmentally friendly workplace

• Made in Australia by the market leader in Electro Cleaning technology

• 2 Year Warranty on power unit

The Control Panel:Easy to use, the power mode offers three steps, off, half-power and full power. The function mode offers three steps clean, polish and marking (etching). Coloured coded output terminals make hook-up and setting a breeze.

The Accessories:The FabFINISH system comes complete and is backed up by a whole range of additional accessories.

Before After

Suitable Welding Processes for CleaningGMAW (MIG), SMAW (STICK) and GTAW (TIG)

Input Power 240V x 2.2A 50/60Hz

Rated Output Range 14-35V @ 35-65 Amps

Output CurrentAC and DC dependant on “function mode” selected

Duty Cycle @40oC 100%

Safe Operating Service Temperature -5oC to +55oC

Construction MaterialImpact resistant Polyamide, one piece cabinet, sealed to IP54

Width of Cleaning < 40mm

Thickness of Metal to be Cleaned < 12mm

Maximum Reach with Extension Cables 12m

Country of Manufacture Australia


SS300

ab ab


Gear

®

POWERMODE

FUNCTIONMODE

abFINISH

Electro Clean, Polish and Marking machine for Stainless Steels

HALF

FULL

OFF

POLISH

CLEAN

MARK

abFINISH Clean, Polish and Marking Machine for

Stainless Steels

W

AR R A N

TY2

YEARW

AR R A N

TY

©©

16mm


W

AR R A N

TY2

YEARW

AR R A N

TY

240 Volt

32A

For Maximum Output


®abPLAS 15.20 Air Plasma Cutter

®abPLAS 14.18 Combi In-built Compressor Plasma Cutter

P/C FG1316iPLAS

S/C 49891

P/C FG1418PLAS.COMBi

S/C 14135

• Cuts; Mild & Carbon Steels, Aluminium, Brass, Bronze, Copper and Stainless

• The plasma stream runs off clean compressed air• Lightweight and easy to use• Back striking ignition• No HF interference• High Voltage stable cutting arc• Fast cutting speed• Simple Operation, easy to understand

control panel• Drop down protection cover• Small size; compact, lightweight, &

portable• Easy torch fitting, Quick fit gas connections• Built in warning systems• Distance, Drag & Extended consumable options available• Wide Input voltage range• Supplied with a 6m Plasma cutting torch – Surecut PT60• Comprehensive Owner’s Manual

©20

17 S

upag

as

20mmMaximum Severance Cut

Arc Process Plasma Arc Cutting (PAC)

Power Supply (Voltage) 1-Phase 216 - 264 Volts

Frequency Hertz 50/60 Hz

Rated Input Power (kW) 6.0kW (240v), 4.7 (220v)




) 19.4A

Power Factor 0.75

Amperage Range 20 – 40 Amps

Duty Cycles @ 40OC40Amps @ 60%, 35Amps @ 80%,31Amps @ 100%

Pierce Hole Cutting 8mm

Quality Cutting 14mm

Maximum Cutting (Severance Cut) 18mm

Recommended Air Pressure 115L/min @ 5.5Bar

Max. Open Circuit Voltage 220V


©20

17 S

upag

as

18mmMaximum Severance Cut

• A truly portable Air-Plasma metal cutting machine

• Plasma Arc Cutting (PAC) of Steels and Alloys from 240V single-phase power

• Cuts; Mild & Carbon Steels, Aluminium, Brass, Bronze, Copper and Stainless

• The FabPLAS 14.18 Combi is designed to go the places you go; on site, up stairs, in lifting platforms/scissor-lifts and around the work site, all without the hassle of having to connect up to an air compressor unit

• Built in warning systems• Distance, Drag & Extended consumable options available• Wide Input voltage range• Supplied with a 6m Plasma cutting torch – Surecut PT60• Increase your cutting performance even further, by connecting to an external

air supply to increase the cutting speed. This feature overrides the built-in compressor making it a combination air supplied machine - Combi!

• Comprehensive Owner’s Manual

240 Volt

15A

240 Volt

20A

abPLAS 15.20 AIR

AMPS (A)

ON

SET

25 30

35

40 THICKTHIN 20

W

AR R A N

TY2

YEARW

AR R A N

TY

W

AR R A N

TY2

YEARW

AR R A N

TY

ab ab


Gear

®

8

240V

Single Phase

AC240V

Single Phase

AC• Generator Friendly• Quality Cutting

15mm• Maximum Cutting

20mm

• COMBI = Combination Air Supply, - In-built Compressor - Also runs off External Air Compressors

• Quality Cutting 14mm

• Maximum Cutting 18mm

abPLAS®®

For Maximum OutputFor Maximum Output

COMING SOON

Arc Process Plasma Arc Cutting (PAC)

Power Supply (Voltage) 1-Phase 90 - 275 Volts


Rated Input Power (kW) 4.6kW (240v), 4.9 (220v)




) 14.7A

Power Factor 0.99


Duty Cycles @ 40OC40Amps @ 60%, 35Amps @ 80%,31Amps @ 100%

Pierce Hole Cutting 8mm

Quality Cutting 15mm

Maximum Cutting (Severance Cut) 20mm

Recommended Air Pressure 110L/min @ 5.0Bar

Max. Open Circuit Voltage 320V

Weight & Dimensions (LxWxH) 7.5Kg & 510mm x 150mm x 280mm


®abARC 185i LT Stick & Lift-TIG Inverter Welder

P/C FG185iARC

S/C 14102

Welding Processes GTAW (TIG) and MMAW (STICK)





) 15.8A (STICK), 10.0A (TIG)


20A


Recommended Maximum Welding Thickness

16mm Fillet or Butt

MMAW Electrode Sizes 2.0mm, 2.5mm, 3.2mm and 4.0mm



16mm


240 Volt

20A

W

AR R A N

TY2

YEARW

AR R A N

TY

• 185 Amp maximum output• High welding power from 240V single phase• Electronic current control for accurate step-

less adjustment of the welding amperage• Digital Amperage meter for accurate &

repeatable settings• Constant current DC+ or DC- output• Process Selection Switch for STICK and TIG• Suitable for Manual Metal Arc Welding (MMAW)

and DC Lift-Arc Tungsten Inert Gas (TIG) welding• Can be used with 2.0/2.5/3.2mm and 4.0mm

electrodes sizes• Built-in automatic Hot-Start, Arc-Force and

Anti-sticking in MMA mode• Fan Cooled• TIG Torch sold separately• Generator Friendly• Comprehensive Owner’s Manual

ab ab


Gear

®

9

240V

Single Phase

AC• Digital Amperage Meter

®®

For Maximum Output

abREG 300 Argon+ Compact Style, Multi-Entry, Type 10 Regulator

30Lpm Bobbin Flowmeter

P/C FG300AR+REG

S/C 50295

• Side or Bottom Entry• Suitable for MIG or TIG applications• Compact design with integrated

flowmeter• Flowmeter can be viewed from all

angles• Shatter resistant Poly Carbonate

tube flowmeter• Body forged from Class A brass bar• Inlet protected by sintered bronze

filter• External relief valve ensures safety

in use• High quality and robust design

The 3% Mixed Oxide Tungsten’s are universal and suitable for all applications in the whole range of DC and AC welding for non-alloyed and high-alloyed steel, aluminium, titanium, nickel, copper and magnesium alloys etc.

Benefits:• Electrode tip remains “cooler” than Thoriated types• Superior repeatable ignition characteristics• Increased arc stability• Reduced burn off• Higher current carrying capacity• Lower degradation to the electrode tip• Increased application flexibility

3% Mixed Oxide Tungsten’s for TIG Welding

Purple Tip

Product Code Short Code Description

TE3-1.6 51619 1.6mm

TE3-2.4 51620 2.4mm

TE3-3.2 51621 3.2mm

TE3-4.0 51622 4.0mm

TE3-MP 51623 Mixed Sized (pk10) - 4pcs x 1.6mm, 4pcs x 2.4mm, 2pcs x 3.2mm


Carry Bag included

®abTIG Mini 200P AC/DC Pulse TIG Welder

P/C FG200PmTIG

S/C 12200

ab ab


Gear

®

10

240V

Single Phase

AC

®®

®abTIG Midi 203P AC/DC Pulse TIG Welder

P/C FG203PmTIG

S/C 12203

MMA HF LIFT

SCUS

PC

Pre

BC DSEC

Post

2T 4T

% A HzSec Power Alarm Memory

ARC FORCE

HOTSTART WELD AMPS

MMA PULSE

STD

PULSE FREQUENCY

WIDTH

f

CHOICE PARAMETER

ADJUST

21 3 DC

BALANCE % AC FREQUENCY

abTIG Midi 203P AC/DC


Built in

240V

Single Phase

AC

Welding Processes GTAW (TIG)

Power Supply (Voltage) 1-Phase 198-264V


Rated Input Power (kW) 6.1kW (TIG), 8.5kW (MMA)

Power Factor 0.7

Amperage Range 10 - 200 Amps

Duty Cycles on AC-TIG @ 40OC200 Amps @ 35%, 153 Amps @ 60%, 118 Amps @ 100%

Max Open Circuit Voltage 52V


The FabTIG Mini 200P AC/DC is an inverter welding machine designed for TIG (GTAW) welding Aluminium, Stainless and Carbon Steels and also STICK (MMAW) welding of a wide range of ferrous metals. The machine features a basic easy-to-use design that allows both tradespeople and serious hobbyists to weld all sorts of exotic metals in the workshop, on-site or at home. The FabTIG Mini 200P is powerful with a strong 35% duty cycle for serious all day TIG & MMA welding yet light enough to carry around work sites and climb up stairs and ladders.

Mini in size with powerful output:• Designed for Tungsten Inert Gas (TIG) welding in AC-HF or DC-HF and DC

Lift-Arc modes. Also well suited to STICK Welding (MMAW) of a wide range of ferrous metals

• Perfect for TIG welding of Aluminium & Alloys, Stainless & Chrome-Nickel Steels plus Carbon & Low-alloy Steels

• Powerful 200A welding; can run 4.0mm Tungsten electrodes and successfully weld 6mm to 8mm Aluminium

• TIG duty cycle = 35% @ 200A for serious all day on-site welding• Simple to use electronic controls for accurate & easy adjustment of the

welding parameters• Control Panel English symbols and abbreviations; SC = Start Current, US = Up Slope, PC = Peak Current, BC = Base Current, DC = Down Slope, EC = End Current

MMA LIFT HF AC DC 2T 4T

S

%

Hz

CHOICE PARAMETER

FREQUENCY BALANCE

WIDTH

A V

ADJUST

MMA

%

PULSE

STDSC

USPC

Pre

BC DS

EC

Post

HOTSTART

WELDAMPS

ARCFORCE

abTIG Mini 200P AC/DC

Carry Bag included

Approximately 2 Coke cans

high

240 Volt

15A

W

AR R A N

TY2

YEARW

AR R A N

TY

The FabTIG Midi 203P AC/DC is a professional series inverter welding machine designed for High Frequency and Lift-Arc TIG (GTAW) welding plus STICK Electrode (MMAW) arc welding of a wide range of metals. Aluminium, Aluminium-Alloys, Brass, Bronzes, Stainless Steels, Nickel Alloys, Low-Alloy and regular Carbon Steels are all easily weldable with the FabTIG Midi. The machine features an advanced but easy-to-use design that helps turn you into the TIG expert. You can put your FabTIG Midi to work in many ways including; welding and repair work on; fuel tanks, bull-bars, boats, ships, balustrading, pipe work, food grade preparation equipment and furniture, architectural hand railings, pressure vessels and motor racing vehicles etc.

Mid-sized professional AC/DC TIG welder:• 9 Memory Control Settings as standard• Designed for Tungsten Inert Gas (TIG)

welding in AC-HF or DC-HF and DC Lift-Arc modes. Also well suited to STICK Welding (MMAW) of a wide range of ferrous metals

• Multiple AC-Waves, 1) Square Wave, 2) Sine Wave and 3) Triangular Wave

• For immaculate TIG welding of Aluminium & Alloys, Stainless & Chrome-Nickel Steels plus Carbon & Low-alloy Steels

• Powerful 200A welding; can run 4.0mm Tungsten electrodes and successfully weld 6mm to 8mm Aluminium

• TIG duty cycle = 40% @ 200A for serious all day welding

• Simple to use electronic controls for accurate & easy adjustment of the welding parameters

• AC Frequency adjustment and control 50-250Hz• 240V single phase supply

240 Volt

15A

W

AR R A N

TY2

YEARW

AR R A N

TY

Welding Processes GTAW (TIG)

Power Supply (Voltage) 1-Phase 198-264V


Rated Input Power (kW) 5.6kW (TIG), 8.8kW (MMA)

Power Factor 0.7

Amperage Range 10 - 200 Amps

Duty Cycles on AC-TIG @ 40OC200 Amps @ 40%, 163 Amps @ 60%, 126 Amps @ 100%




Built in

CORDLESS Remote and Foot Pedal available as optional extras

S/C: 10477S/C: 53590

For Maximum OutputFor Maximum Output


®abTIG TCK01 TIG Consumables Kit

All the right stuff in all the right places

P/C FG.TCK01

S/C 52607

Even if you are starting out in TIG welding or you’ve being TIG welding for a while, the TIG Consumables Kit is a handy little TIG Tool Kit that keeps all the Collets, Collet Bodies, Back Caps, Insulators, Nozzles and Tungsten’s in one easy to find location. It allows the user to tackle most TIG welding applications with professional ease.

The TCK01 TIG Tool Kit also offers plenty of room to add more spare parts and consumables such as, spare Torch-heads, TIG Pen, TIG-Gloves and other spare gear, etc.

Features:• The TIG Consumables Kit is supplied in a sturdy

little plastic toolbox that features two fold out parts trays with laser-cut, high density foam inlays to hold the parts supplied

• The laser-cut, high density foam inlays make your job easy. The parts all have a home and it’s easy to see what’s missing or being used

• Suits 17, 18 and 26 model LINDE* Style TIG Torch heads.

• The kit is supplied with a standard consumables set (collet, collet-body and gas nozzles) plus two sized sets of gas lenses (1.6mm and 2.4mm) for improved gas shielding when welding reactive metals such as stainless steel, high carbon and low-alloy steel and titanium alloys

Why use Gas Lenses:Gas lenses provide more shielding gas coverage and exclude the air from the weld zone. If you’re getting black, dull coloured welds on stainless steel, low alloy steels or other reactive metals, then use a gas lens.

* The trade names listed are for reference, identification and customer convenience only and remain the intellectual property of the respective trade mark/name owners.

TIG

ab ab


Gear

®

11

®®

®abTIG Maxi 320P AC/DC Pulse TIG Welder

P/C FG320PmTIG

S/C 12320

CHOICE PARAMETER

abTIG Maxi 320P AC/DC

2T

4T

WIDTH

PULSE FREQUENCYf

AC FREQUENCYBALANCE

%

SC

US

PC

Pre

BC

DS

EC

Post

PULSE

STD

S

%

Hz

MMA

MEMORYH20 ALARM

SINE

SQUARE

TRI

DC

HF TIG

LIFT TIG

MMA

POWER

ALARM

GAS

H20

WELD AMPS

HOT START

ARC FORCE

AMPS

M

415V

Three Phase

AC

The FabTIG Maxi 320P AC/DC is a 415V three phase, high duty cycle Tungsten Inert Gas (TIG) welder. Employing AC-HF or DC-HF and DC Lift-Arc modes this machine is well suited to welding a wide range of ferrous (magnetic) and non-ferrous metals. This machine can be used for professional level TIG welding of Aluminium & Alloys, Stainless & Chrome-Nickel Steels plus Carbon & Low-alloy Steels. The FabTIG Maxi features a powerful 320Amps of welding power at an impressive 60% duty cycle for serious all day production welding.

A Compact industrial series AC/DC TIG:• 9 Memory Control Settings as standard• Powerful 320A welding; can run the largest

Tungsten electrodes and successfully weld 10mm to 15mm Aluminium

• Digital display with a logical easy-to-use control panel

• AC-High Frequency mode for TIG welding Aluminium and Aluminium-Alloys

• Multiple AC-Waves, 1) Square Wave, 2) Sine Wave and 3) Triangular Wave• DC-HF or DC-LIFT modes for TIG welding Stainless and Carbon Steels• AC and DC+/- modes for STICK welding with MMAW electrodes including

Hot-Start and Arc-Force controls• Pulse TIG mode for control of penetration

and weld shape• Pulse TIG Width and Frequency

adjustments• 2T and 4T TIG Torch trigger modes• Balance adjustment for penetration/cleaning

control and Tungsten shape control• AC Frequency adjustment and control 50-250Hz• Pre and Post Gas Flow adjustment

W

AR R A N

TY

W

AR R A N

TY

3YEAR

Welding Processes GTAW (TIG) and MMA (Stick)

Power Supply (Voltage) 3-Phase 374-457 Volts


Rated Input Power (kW) 11.4kW (TIG) 16.5 (MMA)

Power Factor 0.75


Duty Cycles on AC-TIG @ 40OC320Amps @ 60%, 277Amps @ 80%, 248Amps @ 100%



CORDLESS Remote and Foot Pedal available as optional extras

S/C: 10477S/C: 53590


COMING SOON

MultiLINER - One liner to fit them all

• If you need a MIG Gun liner and are not too sure what brand MIG Gun you have, then Multiliner is the solution - one liner to fit them all©

• Stock one liner and multiple collets to suit the individual MIG Gun brand you are using.

• Reduce your inventory, great for workshops where multiple brands of MIG Guns are used.

• Stock one liner and the correct MultiLINER Collet and liner stocks can be reduced by 66% on average, when three different brands of MIG Guns are used in the one work-place.

Description:The MultiLINER concept has been designed to reduce the complexity and amount of stock quantities held for different brand MIG gun liners.

Some workshops have three, sometimes four different brand MIG Guns on different brand MIG Welders, keeping track of all the spare parts for the MIG guns becomes a big task.

MultiLINER helps eliminate stock-outs and over stocks of the wrong liners plus brings peace of mind to welding and fabrication operations that rely on MIG Welding.

0.6 - 0.9mm Solid & Cored Wires



0.9 - 1.2mm Aluminium

MultiLINER - Triple Collet Packs

These liners are supplied with the three most popular MIG gun liner collets on the Australian market; Binzel, Tweco and Bernard Styles. This kit provides peace of mind to most users of common MIG Guns, so you don’t get caught out ordering in the wrong brand liner.

BERNARDSTYLE

BINZELSTYLE

TWECOSTYLE


MLKS50609 52796 0.6 - 0.9mm - 5.1m - Blue

MLKS50912 52797 0.9 - 1.2mm - 5.1m - Red

MLKS51216 52798 1.2 - 1.6mm - 5.1m - Yellow

MLKA40912 52800 0.9 - 1.2mm - 4.5m - Grey

MLKA60912 52801 0.9 - 1.2mm - 6.5m - Grey

MLKA80912 52802 0.9 - 1.2mm - 8.5m - Grey

MLKS - Steel, Solid and Cored Wires

MLKA - Polycarbon for Aluminium and Soft Wires

MultiLINER - Singles and Collets

The trade names listed are for reference, identification and customer convenience only and remain the intellectual property of the respective trade mark/name owners.

TREGASKISS STYLE

P/C MLC.TRG S/C 52820TWECO STYLE

P/C MLC.TWC S/C 52821

BERNARD STYLE

P/C MLC.BND S/C 52814BINZEL STYLE

P/C MLC.BZL S/C 52815

ESAB STYLE

P/C MLC.ESB S/C 52816KEMPPI STYLE

P/C MLC.KMP S/C 52817

OTC STYLE

P/C MLC.OTC S/C 52818PANASONIC STYLE

P/C MLC.PNA S/C 52819

With the choice of the correct style Liner Collet. Choose your Collet from the eight (8) most popular style MIG Gun brands on the market. Add this to the correct wire sized liner and simply screw on the collet to make up your new liner.

Collets are available from the eight (8) most popular style MIG Gun brands on the market.


MLS50609 52805 0.6 - 0.9mm - 5.1m - Blue

MLS50912 52806 0.9 - 1.2mm - 5.1m - Red

MLS51216 52807 1.2 - 1.6mm - 5.1m - Yellow

MLA40912 52809 0.9 - 1.2mm - 4.5m - Grey

MLA60912 52810 0.9 - 1.2mm - 6.5m - Grey

MLA80912 52811 0.9 - 1.2mm - 8.5m - Grey

MultiLINER©©

ab ab


Gear

®

12 FabGear quality products are especially designed for the Metal Fabrication, Welding, Sheetmetal and Engineering trades.

ab ab


Gear

®

13

125mm x 1.0mm Thins

Main Features: The FabCUT Thin disc produces a small cutting width of just over 1mm wide and ensures heat input is drastically reduced to the cutting area which minimizes distortion, particularly in thin sheet metals.

Contains no iron and is suitable for use on stainless steel, carbon steel and all alloys.

The specially designed abrasive compounds cut faster and last longer than most other comparable competitive discs – we compare the best in a special purpose test rig that takes out the “human-factor” in the testing.

• Quality, long lasting, fast cutting disc, suitable for Stainless Steels and Carbon Steels.

• Supplied standard with metal reinforcing ring.

Standards: Manufactured to and complies with AS1788.1-1987 and EN12413

P/C FGCDT125i

S/C 51499

125mm Zirc-Inox Flap Disc

Main Features: The FabFLAP discs use European made zirconium abrasive cloth and the strips are W:20mm x L:30mm and on a 40G Disc contain 75 flaps, compared to some “standard 40G discs” who measure up at only W:15mm x L:24mm x 65 Flaps.

These discs are thick and durable, and the zirconium grit breaks down readily and stays sharp ensuring quality cutting all the way through to the end of the disc.

• Quality, long lasting, zirconia oxide grit, suitable for Stainless Steels and Carbon Steels.

• Thick large flaps ensure excellent stock removal.


40G - P/C FGFD125z40 S/C 5196860G - P/C FGFD125z60 S/C 5196980G - P/C FGFD125z80 S/C 51970

125mm x 6mm Dual Layer

Main Features: FabGRIND Wheels have been designed with the latest Dual Layer (DL) Technology.

These wheels can be used in exacting applications where the operator needs to remove vast amounts of stock quickly (the harder you push the harder it grinds) and then conversely be able to finish off the job, almost to the level of a Flap-Disc, by simply taking the pressure off and it almost becomes the equivalent of a file.

• NEW - Dual Layer Technology• The harder you push the harder it grinds, take the

pressure off and it almost becomes a file.


P/C FGGW125DL

S/C 51508

©abDISC©


MS SS

abWIRE MS756 Mild Steel MIG Wire

AWS A5.18: ER70S-6

• PLW = Precision Layer Wound wire for improved feeding

• Drawn to tight diameters for consistent and reliable feedability

• Manufactured with precise alloy chemistries

• Suitable for Gas Metal Arc Welding (GMAW) also known as Metal Inert Gas (MIG) Welding

Classifications:AS/NZS ISO: 14341: BG 49A 3U C1/M21 S6AWS A5.18: ER70S-6


MW.MS756.250.09 51543 0.9mm x 250kg

MW.MS756.250.10 51544 1.0mm x 250kg

MW.MS756.250.12 51545 1.2mm x 250kg

MW.MS756.15.06 51527 0.6mm x 15kg

MW.MS756.15.08 51528 0.8mm x 15kg

MW.MS756.15.09 51529 0.9mm x 15kg

MW.MS756.15.10 51530 1.0mm x 15kg

MW.MS756.15.12 51531 1.2mm x 15kg

MW.MS756.05.06 51532 0.6mm x 5kg

MW.MS756.05.08 51533 0.8mm x 5kg

MW.MS756.05.09 51534 0.9mm x 5kg

MW.MS756.05.10 51535 1.0mm x 5kg

ab ab


Gear

®

14

©©

abWIRE SS316LSi Stainless Steel MIG Wire

AWS A5.9: ER316LSi

FabWIRE SS316LSi is designed for welding low carbon stainless steels with molybdenum, such as acid resisting 316L austenitic stainless steels and other grades of similar composition, including 304L type and grades containing Nb or Ti.• The main uses include welding and surfacing applications to matching and

similar non-stabilized – austenitic CrNi(N) and CrNiMo(N) steels and cast steel grades such as; 301, 302, 304/304L, 316/316L, 318, 321, 347, 410, 430, and 444 stainless steels.

• The perfect MIG/GMAW filler wire for welding 18% Cr + 8%Ni + 3%Mo (known as 18/8) type Stainless Steels.

Classifications:AS/NZS ISO 14343-B: SS316LSiEN/ISO 14343-A: G 19 12 3L SiAWS A5.9: ER316LSi


MW.SS316L.13.08 53563 0.8mm x 12.5kg

MW.SS316L.13.09 53564 0.9mm x 12.5kg

MW.SS316L.13.10 53565 1.0mm x 12.5kg

MW.SS316L.13.12 53566 1.2mm x 12.5kg

MW.SS316L.05.08 53561 0.8mm x 5kg

MW.SS316L.05.09 53562 0.9mm x 5kg

For welding of mild and low alloy steels in all positions.

abWIRE MS756

Classifications & Quality Approvals:AWS A5.18: ER70S-6AS/NZS ISO: 14341: BG 49A 3U C1/M21 S6 Approvals: ABS, DB, CE, GL, LR and TUVISO9001: 2000 – Quality Approved Process by Bureau Veritas

Batch No:

Spool Size:300mm

Net Weight:15Kg

P/C

: MW

.MS7

56.1

5.06

0.6mm

S/C: 51527

934

6277

0252

94

MIG/GMAW wire for welding 300 and 400 Series stainless steels such as 301, 302, 304/304L, 316/316L, 318, 321, 347, 410 and 430 grades.

Classifications & Quality Approvals:AWS A5.9: ER316LSiAS/NZS ISO 14343-A: G 19 12 3 L SiAS/NZS ISO 14343-B: SS316LSiApprovals: CE and DBISO9001: 2000 – Quality Approved Process by Bureau Veritas

Batch No:

Spool Size:300mm

Net Weight:12.5Kg

P/C

: MW

.SS3

16L.

13.0

8

0.8mm

S/C: 53563abWIRE SS316LSi

934

6277

0043

81

abROD SS316L Stainless Steel TIG Rod

AWS A5.9: ER316L

• TIG/GTAW & Oxy Welding rod for welding 300 and 400 Series stainless steels such as 301, 302, 304/304L, 316/316L, 318, 321, 347, 410 and 430 grades.

• The perfect MIG/GMAW filler wire for welding 18% Cr + 8%Ni + 3%Mo (known as 18/8) type Stainless Steels.

Classifications:AS/NZS ISO 14343-B: SS316LEN ISO 14343-W 19 12 3LAWS A5.9: ER316L


TR.SS316L.05.12 53285 1.2mm x 5kg

TR.SS316L.05.16 53286 1.6mm x 5kg

TR.SS316L.05.24 53287 2.4mm x 5kg

TR.SS316L.01.12 53280 1.2mm x 1kg

TR.SS316L.01.16 53281 1.6mm x 1kg

TR.SS316L.01.24 53282 2.4mm x 1kgP/C: TR.SS316L.05.12

S/C: 53285abROD SS316L

9 346277 004794

1.2mm5kg

TIG/GTAW & Oxy Welding rod for welding300 and 400 Series stainless steels such as 301,

302, 304/304L, 316/316L, 318, 321, 347, 410and 430 grades.

Size:

Weight:

Classifications: AWS A5.9: ER316L AS/NZS ISO 14343-W 19 12 3 L AS/NZS ISO 14343-B: SS316LApprovals: DB, CE and TUVBatch No:

abROD MS752 & MS756 Mild Steel TIG Rod

• MS752 is a mild steel filler rod suitable for oxy-acetylene and TIG welding of carbon steel and wrought iron. It is triple deoxidised for superior weld deposit quality and resistance to porosity.

• MS756 is a general purpose mild steel filler rod suitable for oxy-acetylene and TIG welding of carbon steel and wrought iron, it is double oxidised suitable for high integrity TIG welding or Mild and Medium Tensile steels.

P/C: TR.MS752.01.16

S/C: 53320abROD MS752

1.6mm1kg

Mild steel filler rod suitable for oxy-acetyleneand TIG welding of carbon steel and

wrought iron. Triple deoxidised for superiorweld deposit quality and resistance to porosity.

Size:

Weight:

Classifications: AWS A5.18: ER70S-2AS: 1167.2: R6Approvals: ABS, DB, CE, GL, LR and TUVBatch No:

9 346277 024990

abROD©

Classifications:MS752 - AWS A5.18: ER70S-2 AS: 1167.2: R6MS756 - AWS A5.18: ER70S-6 AS: 1167.2: R6

ER70

S-2

ER70

S-6


TR.MS752.05.16 53324 1.6mm x 5kg

TR.MS752.05.24 53325 2.4mm x 5kg

TR.MS752.01.16 53320 1.6mm x 1kg

TR.MS752.01.24 53321 2.4mm x 1kg

TR.MS756.05.16 53336 1.6mm x 5kg

TR.MS756.05.24 53337 2.4mm x 5kg

TR.MS756.01.16 53333 1.6mm x 1kg

TR.MS756.01.24 53334 2.4mm x 1kg

5kg

1kg

5kg

1kg


abROD AL5356 Aluminium TIG Rod

AWS A5.10: ER5356


TR.AL5356.18.16 53310 1.6mm x 1.8kg

TR.AL5356.18.24 53311 2.4mm x 1.8kg

TR.AL5356.18.32 53312 3.2mm x 1.8kg

TR.AL5356.01.16 53307 1.6mm x 1kg

TR.AL5356.01.24 53308 2.4mm x 1kg

TR.AL5356.01.32 53309 3.2mm x 1kg

abWIRE AL5356 Aluminium MIG Wire

AWS A5.10: ER5356

FabWIRE AL5356 is an Aluminium-5% Magnesium solid MIG wire for welding similar grade 500/5000 series and selected other grade aluminium and aluminium alloys to themselves and other lower strength aluminium materials.• Double Diamond Shaved outer diameter for tight dimensional consistency

for reliable feedability• PLW = Precision Layer Wound wire for improved feeding, every layer on the

spool is the same, layer after layer, so reducing the possibility of tangles and poor feedability

• Suitable for Gas Metal Arc Welding (GMAW) and Metal Inert Gas (MIG) welding

Classifications:AS/NZS ISO: 18273:2006 – S AL5356 (ALMg5Cr)AWS A5.10: ER5356


MW.AL5356.02.09 52330 0.9mm x 2kg

MW.AL5356.02.10 52331 1.0mm x 2kg

MW.AL5356.06.09 52332 0.9mm x 6kg

MW.AL5356.06.10 52333 1.0mm x 6kg

MW.AL5356.06.12 52334 1.2mm x 6kg

MW.AL5356.06.16 52335 1.6mm x 6kg

General Purpose Aluminium wire containing 5% Magnesium, giving excellent corrosion resistance and high strength.

abWIRE AL5356

Classifications & Quality Approvals:AWS A5.10: ER5356AS/NZS ISO: 18273:2006 – S AL5356 (ALMg5Cr)Approvals: CE and DBISO9001: 2000 – Quality Approved Process by Bureau Veritas

Batch No:

Spool Size:300mm

Net Weight:6Kg

P/C

: MW

.AL5

356.

06.1

0

AL 1.0mm

S/C: 52333

934

6277

0044

80

ab ab


Gear

®

15

abSAFE©©

P/C: TR.AL5356.01.16

S/C: 53307abROD AL5356

1.6mm1kg

Classifications: AWS A5.10: ER5356 AS/NZS ISO: 18273:2006 – S AL5356 (ALMg5Cr)Approvals: DB, CE and TUVBatch No:

TIG/GTAW & Oxy Welding GP Aluminium rod containing 5% Magnesium, giving

excellent corrosion resistance and high strength.

Size:

Weight:

9 346277 005753

abROD©

abPROTEC Leather Welding Blanket

P/C FGPRO.WB

S/C 51631

• Heavy Duty split leather construction for durability

• 100% Kevlar Stitching for resistance to heat, cuts and abrasion

• Continuous working temperature of 80˚C

• Packaged in a reusable bag

Size:• 1.8 x 1.8m

Applications:• Ideally suited for protecting

sensitive items such as glass windows, timber, cardboard, plastic materials and paint work on car panels etc, from welding and grinding sparks and other thermal generated heat sources.

FabPROTECLeather Welding Blanket

P/C: FGPRO.WBS/C: 51631

©

abGear G

abFLASH Welding Curtains and Frame

• Translucent, standards approved polyvinyl curtain• Designed to protect other workers from the welding arc• Reduces light transfer to other work areas• Curtain available in green or red


SP.F1818 11652 Frame Kit - 1.8 x 1.2/1.8 x 1.8

SP.C1818G 13207 Green - 1.8 x 1.8m

SP.C1818R 14710 Red - 1.8 x 1.8m

• FabROD AL5356 is an Aluminium-5% Magnesium solid TIG rod for welding similar grade 500/5000 series and selected other grade aluminium and aluminium alloys to themselves and other lower strength aluminium materials.

Classifications:AS/NZS ISO: 18273:2006 – S AL5356 (ALMg5Cr)AWS A5.10: ER5356

1.8kg

1kg


©abGLOVE Venus Leather Welding Gloves

P/C FGVEN.GWL S/C 53463

©abGLOVE Neptune Leather Welding Gloves

©abGLOVE Mars Leather Welding Gloves

P/C FGMAR.GWL S/C 53465

ab ab


Gear

®

16

abGLOVE©©

P/C FGNEP.GWL S/C 53464

The Venus welding gloves are a DELUXE level hand protector that have been designed to take the all-day punishment that welders and fabricators dish out whilst welding on the big jobs. If you’re serious about your welding and tough is what you’re after then the FabGLOVE Venus Welding Gloves are the ones to grab.

Length: 410mm long

Suitable Welding Processes:• Gas Metal Arc Welding (GMAW) aka MIG• Manual Metal Arc Welding (MMAW) aka STICK

Construction: • Made from deluxe AB-Grade cowhide side leather• Double skinned palm reinforcement is double

line stitched with Kevlar® sewing thread for added heat protection when handling hot components

• Reinforced thumb and knuckle guards for added radiated heat protection when working up close to the welding arc

Standards: Manufactured to and complies with EN388/EN12477 and meets the requirements of the European Conformity regulations.

©abGLOVE Saturn Leather Welding Gloves

P/C FGSAT.GWL S/C 53467

The Saturn welding gloves offer a STANDARD level of hand protection at a value rate and are designed along traditional welding gloves styles for people who weld. The FabGLOVE Saturn Welding Gloves provide sufficient protection against heat generated by the welding arc, the ultra-violet and infra-red rays plus all the spatter and sparks encountered whilst welding.

Length: 410mm long


Construction: • Made from standard cowhide split shoulder leather• Seamless index finger for added comfort• Reinforced thumb and knuckle guards

for added radiated heat protection when working up close to the welding arc

• FabRIC-Cool inner lining for superior comfort• Great value, long wearing gloves for people who weld!


The Neptune welding gloves are a PREMIUM level hand protector that have been designed with EXTRA heat resistant padding “HeatFOAM” for the professional welder. When premium comfort whilst welding is the prime concern then the FabGLOVE Neptune Welding Gloves are the ones to specify.

Length: 410mm long


Construction: • Made from premium A-Grade pig skin leather for the hand area and

premium grey leather for the arm-end of the glove• Elastic mid cuff “triangular stitched” at the wrist area with Kevlar® thread to

provide a secure fit onto the hands• HeatFOAM heat-resistant hand lining for

the ultimate in comfort, radiated heat protection and moisture absorption


The Mars welding gloves offer SUPERIOR level hand protection at a reasonable price level, without sacrificing the overall glove quality level. FabGLOVE Mars Welding Gloves stand up to the tough conditions that welders, fabricators, fitters and tradespeople face on the job, be it on-site or in the workshop.

Length: 410mm long


Construction: • Made from superior AB-Grade cowhide shoulder leather• Double skinned palm reinforcement is double line stitched with Kevlar®

sewing thread for added heat protection when handling hot components

• Reinforced thumb and knuckle guards for added radiated heat protection when working up close to the welding arc

• FabRIC-Cool inner lining for superior comfort


Welting FeatureFully welted construction. A thin piece of leather

is sewn into the seam towards the outside of the glove to protect the seams from abrasion

and sparks so reducing burn-through.


©abGLOVE 5-Star General Riggers Gloves

M - P/C FG5SG.RL09 S/C 51625

L - P/C FG5SG.RL10 S/C 51626

XL - P/C FG5SG.RL11 S/C 51627

• General purpose utility work glove• ‘A’ grade beige premium cow leather• Wing thumb for stitch-free palm• Double stitched for strength, elastic back• Colour-coded cuff for size identification

Recommended and Industry Uses:• Truck and Transport Industries• Farm and Agricultural applications• Mining and Construction Industries• Building Industry• Civil Construction• Timber and Forestry• Oil Rigs and Oil Fields

Standards: Manufactured to EN388 standard

©abGLOVE Gemini GoatSkin TIG Welding Gloves

P/C FGGEM.GWT S/C 53468

ab ab


Gear

®

17

abGLOVE©©

©abGLOVE Jupiter Goat & CowSkin TIG Welding Gloves

P/C FGJUP.GWT S/C 53471

©abGLOVE Mercury Leather Welding Gloves

P/C FGMER.GWL S/C 53462

The Mercury welding gloves are the ULTIMATE level in hand protection, they have been designed with the professional welder in mind. When ultimate comfort and arc protection is the prime concern then the FabGLOVE Mercury Welding Gloves are the ones to use.

Length: 380mm long


Construction: • Made from ultimate A-Grade cowhide buttocks leather• Double skinned palm reinforcement is cross stitched with Kevlar®

sewing thread for added heat protection when handling hot components

• Elastic rear cuff “wave stitched” at the ¾ length mark with Kevlar thread to provide a secure fit and reduce the chances of any spatter ingress onto the hands


The Jupiter welding gloves offer the ULTIMATE level of hand protection in TIG welding and have been designed with the professional in mind. The FabGLOVE Jupiter TIG Welding Gloves deliver the ultimate feel of the TIG Rod and they provide exceptional comfort and style. The white goat-skin leather on the hand top reflects the arc rays away from the hand, helping to keep the operator’s hand cooler. With a padded palm support these gloves are awesome to wear and use – as they should be for welding experts.

Length: 320mm long

Suitable Welding Processes:• Gas Tungsten Arc Welding (GTAW) aka TIG• Gas Metal Arc Welding (GMAW) aka MIG – light duty• Manual Metal Arc Welding (MMAW) aka STICK – light duty

Construction: • Seamless index finger for added

comfort• Wing thumb construction

Standards:Manufactured to and complies with EN388/EN12477 and meets the requirements of the European Conformity regulations.

The Gemini welding gloves offer a SUPERIOR level of hand protection and have been designed for general and specialised TIG welding. The FabGLOVE Gemini TIG Welding Gloves deliver a superior feel of the TIG Rod compared to standard “hard leather” gloves. They provide super comfort and protection for light duty welding operations.

Length: 330mm long

Suitable Welding Processes:• Gas Tungsten Arc Welding (GTAW) aka TIG• Gas Metal Arc Welding (GMAW) aka MIG – light duty• Manual Metal Arc Welding (MMAW) aka STICK – light

duty

Construction: • Made from superior A-Grade Goat-

skin leather on the palm with a cowhide gauntlet leather cuff and top

• Seamless index finger for added comfort• Wing thumb construction

Standards:Manufactured to and complies with EN388/EN12477 and meets the requirements of the European Conformity regulations.


®

FabGear quality products are especially designed for the Metal Fabrication, Welding, Sheetmetal and Engineering trades.ab ab


Gear

®

18

®

®abSHIELD MAGNESIUM Welding Helmets

®abSHIELD VANADIUMWelding Helmets

The important stuff:• Variable Shade, Dual Range 5-8 and 9-13 Auto Darkening Filter (ADF)

with Grinding Mode• Fully automatic on/off power.• Modern and compact external controls so you don’t have to take off the

helmet when adjusting• Graphic wrapped for maximum attention• Low weight for comfortable all-day welding = 520g• 2-Year Warranty on ADF

Package Contents:• FabSHIELD Magnesium Graphic Helmet shell• FabGear ADF Lens FG10050M1• FG1000 Head harness• One spare inside and two outside cover lenses• Instruction and Operation Manual

Standards Compliance AS/NZS:1338.1

EN379 Quality Rating 1/1/1/2

Welding Process Suitability MIG, STICK & TIG

Suitable for TIG Low Amp 10A

Suitable for PLASMA (PAC) Yes

Grinding Mode Yes

No of Sensors 4

Welding Shade Range/Level 5-8 / 9-13

Light Shade 4

Switching Speed 1/25,000 sec

Viewing Area LxH 100 x 50mm

Viewing Area 5,000mm2

Viewing Area Square Root 70.71mm


Weight 520g





Suitable for PLASMA (PAC) Yes

Grinding Mode Yes

No of Sensors 4

Welding Shade Range/Level 5-8 / 9-13

Light Shade 4






Weight 595g

Magnesium-1 Vanadium-2Vanadium-1Magnesium-2

Vanadium-1 Red Flames - P/C FGVANAD1.AWH S/C 52542

Vanadium-2 Devil 666 - P/C FGVANAD2.AWH S/C 52543

Magnesium-1 Silver-Line - P/C FGMAGNE1.AWH S/C 52538

Magnesium-2 Arcinator - P/C FGMAGNE2.AWH S/C 52539

PLASMASTICK MIG TIG PLASMASTICK MIG TIG

FabGear FG10050M1 ADF Lens

View from inside

View from inside

FabGear FG9888V1 ADF Lens

The important stuff:• Variable Shade, Dual Range 5-8 and 9-13 Auto Darkening Filter (ADF)

with Grinding Mode• Fully automatic on/off power• Extra Large Viewing area = 98 x 88mm = 8,624mm2• Excellent on TIG down to 5 Amps• Graphic wrapped for maximum attention• Low weight for comfortable all-day welding = 595g• 2-Year Warranty on ADF

Package Contents:• FabSHIELD Vanadium Graphic Helmet shell• FabGear ADF Lens FG9888V1• FG1000 Head harness• Two spare inside and three outside cover lenses• Instruction and Operation Manual

abGLOVE©

abSPEC iSpec Safety Specs

Clear - P/C FGiSC.SS S/C 51629

Smoke - P/C FGiSS.SS S/C 51630

Description:Sleek styling with an ultra-light weight wraparound lens shape which allows these specs to fit a wide variety of face shapes.

The lenses are specially treated with:• Hard-coat lense for anti-scratch • Anti-fog coatings• iSpec safety glasses offer 99.9% Ultra Violet (UV) protection

Standards: Manufactured and certified to Australian & New Zealand Standard AS/NZ 1337:1992.

Charcoal

abMASK P2-Valved Disposable Respirators

Standard - P/C FGP2V.MASK S/C 51566

Charcoal - P/C FGP2VC.MASK S/C 51567

Description:Pre-shaped, half-face, disposable respirators for Level-2 Particulates, valved for use with most dusts, mists and cellousic based organic fumes. The masks offer a pre-shaped nose cushion with a soft inner layer ensuring excellent fit to most facial shapes. The Exhalation Valve makes breathing easier and aids in comfort for the user. • No metal parts used in construction• Charcoal reduces smell and odours• Single use only

Standards: Manufactured and certified to Australian & New Zealand Standard AS/NZS 1716:2012, Licence No: SMKH20566.

Standard

abSAFE©

®abSHIELD CHROMIUM-1 Welding Helmet

P/C FGCHROM1.AWH S/C 52534

• Variable Shade, 9-13 Auto Darkening Filter (ADF) with Grinding Mode

• Fully automatic on/off power• Adjustable light sensitivity and delay time control• Two independent light sensors• Easy to use external controls so you don’t have

to take off the helmet when adjusting• Graphic wrapped for maximum attention• 2-Year Warranty on ADF

®abSHIELD FLIP Welding Helmet

P/C FGFLIP.AWH S/C 52532





Suitable for PLASMA (PAC) No

Grinding Mode Yes - Flip Up

No of Sensors 2

Welding Shade Range/Level Auto Shade 11

Light Shade 3






Weight 495g

• Shade 11 Auto Darkening Filter (ADF) with a flip lid• Grinding is completed easily by flipping up the lid• Clear grinding lens• Two independent light sensors• Solid construction to take day-in-day-out

punishment• No frills, no big bills• Built in lithium-ion battery with solar assist

and back-up• 2-Year Warranty on ADF





Suitable for PLASMA (PAC) No

Grinding Mode Yes

No of Sensors 2

Welding Shade Range/Level 9-13

Light Shade 4



Viewing Area mm2 3,864



Weight 485g

FabGear quality products are especially designed for the Metal Fabrication, Welding, Sheetmetal and Engineering trades. ab ab


Gear

®

19

©

FabGear FG9242A1 ADF Lens

View from inside

FabGear FG9843C1 ADF Lens

View from inside


FabricatorsGear

Victoria841 Mountain Highway

Bayswater 3153 Ph: 03 9720 0504

130 Herald Street Cheltenham 3192 Ph: 03 9555 1744

23 Commercial Drive Dandenong South 3175

Ph: 03 9706 6262

16 Dalton Street Geelong South 3220 Ph: 03 9720 0504

9A King Drive Horsham 3400

Ph: 03 5381 1282

95 Hume Highway Somerton 3062

Ph: 03 9308 8122

126 Fairbairn Road Sunshine West 3020

Ph: 03 9364 8311

212 Liddiard Street Traralgon 3844

Ph: 03 5176 1085

22 Kane Road Wodonga 3690

Ph: 02 6056 3055

South AustraliaAdelaide

13-15 Bellchambers RoadEdinburgh North 5113

Ph: 08 8252 7472

Lonsdale 29 Hales Drive Lonsdale 5160

Ph: 08 8326 3491

TasmaniaHobart

28 Crooked Billet Drive Bridgewater 7030 Ph: 03 6263 6422

Launceston 1 Gatty Street

Western Junction 7212 Ph: 03 6391 9342

Western AustraliaPerth

6 Dampier RoadWelshpool 6106

Ph: 08 6350 1077

Northern TerritoryDarwin

54 Dawson Street, East ArmBerrimah 0828

Ph: 08 8947 3130

Supagas Locations

FabGear products are available from:

The Story Behind FabGear

The FabGEAR brand has been developed over the years as an alternative to the expensive

well-known brands used by people working in metal.

When you purchase a FabGEAR product YOU are getting value for money, reliability and products that

perform.

The product developers at FabGEAR spend a lot of time with the USERS, people like yourself. We

spec-up our products based on what fabricators, welders and engineering trades people tell us

they need!

Our products are developed, by us, to take in the uniqueness of what we do and how we do it here in

Australia.

We are proud to offer a 2-Year Warranty on most of our machinery and goods range.

FabGear Short Catalogue v3_29062017

13 SUPA13 78 72

www.supagas.com.au*CONDITIONS APPLY

FREEDELIVERY*

Documents

Fabricators Gear 2017 - Supagassupagas.com.au/wp-content/uploads/2017/08/FabGear... · Fabricators Gear 2017 ... MIG: 25 – 200A, TIG: 10 - 200A, STICK: 10 - 200A Input Power Lead