F IRSTLY IS THE OVERVIEW OF THE COMPLETE ASSEMBLY, SHOWN RIGHT. T HE OVERALL PROCESS FOR DESIGNING THIS WAS FAIRLY SIMPLE. E ACH PERSON HAD ONE OR MORE PARTS THAT THEY WERE RESPONSIBLE FOR DESIGNING, WHICH WE THEN COLLECTIVELY TURNED IN AND COMBINED IN TO THE ASSEMBLY. T HE 2 X 8 FLAT PIECE WAS CREATED BY K OMAIL. T HIS DESIGN WASN T ANY MORE CHALLENGING THAN THE REST, OTHER THAN THE FACT THAT SOME OF THE DESIGN PARAMETERS WERE CHANGED IN ORDER TO ACCOMMODATE FOR THE THINNESS OF THE PIECE. T HE 4 X 2 S TANDARD L EGO WAS DESIGN AND CONTRIBUTED BY A HMED. T HIS PIECE WAS ESPECIALLY CONFUSING AND ANNOYING TO DEAL WITH IN THE BEGINNING BECAUSE WE CHOSE FOR THIS PIECE TO BE OUR STARTER PIECE FROM WHICH ALL OTHER PIECES WERE MODELLED AFTER. T HIS 4 X 2 S TANDARD L EGO WAS DESIGNED BY M OHAMMED A LMAKKI. T HIS PIECE WAS ALSO A FAIRLY SIMPLE DESIGN SINCE THERE WAS ALREADY A 2 X 2 PIECE CREATED. B ECAUSE OF THIS M OHAMMED JUST DOUBLED THE LENGTH AND CREATED A MIRROR ACROSS THE CENTER AXIS. T HIS PIECE WAS CREATED BY Z ACH. T HIS PIECE ALSO SEEMED TO PRESENT NO CHALLENGE WHEN DESIGNING BECAUSE WE ALREADY HAD THE 4 X 2 PIECE DONE. S O ONCE AGAIN, WE JUST DOUBLED THE LENGTH AND CREATED A MIRROR ACROSS THE CENTER AXIS. T HE TIRES WERE DESIGNED AND CONTRIBUTED BY J ACOB. T HESE WERE QUITE A CHALLENGE BECAUSE, WHEN LOOKING AT A L EGO, THE PARTS ARE GENERALLY SQUARED AND EASY TO MEASURE. B UT WITH THE WHEEL THERE REALLY WERE NO PREVIOUS MEASUREMENTS THAT COULD HELP IN ANY WAY. T HE AXLE WHICH HOLDS THE TIRES TO THE BODY WAS CREATED BY M OHAMMED A LSAEEDI. T HIS PART WAS VERY STRAIGHT - FORWARD AND EASY TO DESIGN. J UST TAKE THE MEASUREMENTS FROM THE L EGO S INNER CONNECTING HOLES AND DESIGN A STEM BASED OFF OF THOSE MEASUREMENTS. T HE ANTENNA WAS A COLLABORATION PART THOUGHT OF BY THE ENTIRE GROUP AND CREATED BY J ACOB. T HIS PART WAS A FREE - BASED CREATIVE PART. S O THE ONLY KEY TO CREATION WAS GETTING THE INTER - LOCK SIZING RIGHT. O THER THAN THAT, IT WAS SIMPLE.