Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
1977
Ehrler & BeckStuttgart /
Leonberg
Warmbronn /
Renningen
1983
Ehrler PrüftechnikEchterdingen /
Steinenbronn
1999 / 2000
Move to
Zaisenhausen
2008
Move to
Niederstetten
2011 & 2012
Expansion of
the
mounting
surfaceNiederstetten
2016
Laboratory relocation &
expansion of the office spaceNiederstetten
2015
Expansion of the
software department &
the mounting surfaceNiederstetten
EP-E history
2018
Takeover of the business
shares of EPE and EPI by Dr.
Ing. Födisch Environment AG
5
EP-E Range
Measuring and calibration
systems for flow
(air/gas/fluids)
LabVIEW, SPS S7,
Wonderware, C Sharp
Calibration, In-house/On-site,
spare parts, maintenance &
service
Test systems for flow,
leakage, pressure and
temperature
6
Measurement & Calibration systems for:
Air Flow
Gas Flow
Fluid Flow
Standard solutions
Full service provider
in measurement technology
Different levels of accuracy:
Primary standards (NMI)
Laboratory standards (DAkkS)
Industry standards
7
Flow measurement and calibration systems for air and gases
EP LMF® - LaminarMasterFlow®
High precision flow measurement of gases and air
• Flow range up to 700 m³/h (opt. 4000 m³/h)
• Variable system configuration
• Fast and accurate measurement
• Calibration of gas meters, MFM, MFC, LFE,
venturi nozzles
LMF®-Konfigurator on our website!
8
Calibration standards - Flow
BP250 – Bell Prover | System PTB
Primary standard 250 m³/h
• Flow calibration with air
• Traceable to SI units length and time
• Uncertainty ≤ 0.06% (k = 2)
9
Calibration standards - Flow
SMF®6500 - SonicMasterFlow®
Calibration stand with sonic nozzles
• Calibration stand with up to 13 critical nozzles
• Flow generation up to 6500 m³/h
• Highest accuracy - up to 0.12% MV
• Flexible adaptation of nozzles to customer requirements
• Gas meter calibration up to G 4000
10
EP systems for natural gas
GMC - G1,6..G400 Calibration of domestic gas meters
Calibration stand with sonic nozzles
• Modular system design
• Optional SMF® system with 9 nozzles
• Test bench type A: G1,6 to G10
• Test bench type B: G10 to G65
• Test bench type C: G65 to G400
• Fast and stable regulation of the volume flow
• Modular system structure for 1 to 24 test pieces
11
BTB Blower Test Bench
BTB10.000 – Fan test rig
Characteristic line test bench
for suction operation according to DIN EN ISO 5801
• Flow measuring system with 2 LFE measuring sections and
beta sensor (Wilson-Staugitter) up to 10.000 m³/h
• Pressures up to -100 Pa
• Measuring accuracy up to ± 1% MV
• Universal clamping plate for testing various test specimens
• Optional: Switch from suction to blowing operation
12
Calibration pyramid
National Standards
EP Bell Prover (0.06 % unc.)
EP Nozzle test bench
SMF4000 (0.15 % unc.)
EP BTB - Blower test bench (0.5 % unc.)
Blower (1…x % acc.)
SI unitsm, s
13
Test systems forFlow
Test systems forLeakage
Test systems forPressure
Test systems forTemperature
Special solutions
Full service provider
in measurement technology
14
Calibration standards - Flow
HPPP480 - High Pressure Piston Prover
Primary standard with integrated nozzle register
for natural gas up to 100 bar / volumetric flow 480 m³/h
• Nozzle register for flow stabilization
• Reference gas meters and nozzle registers as secondary standards
• High-precision calibration standard: Uncertainty up to ≤ 0.07% (k = 2)
• Calibration pressure variable up to 100 bar
• Traceability to the SI units length and time
15
Endurance test rig, pressure and temperature
PTCB6000 - Pressure & Temperature Change Test Bench
• Test with different pressure curves: trapezoid, sine, triangle
• Pressure change test from -0.8 to 6 bar rel.
• Media temperature up to 300 ° C
• Environmental simulation from -40 to 200 ° C
Examples of test pieces:
Intercooler, heat exchangers, pressurized housing, reservoir for oil and water, valves, filter housing
16
VTB - Valve Test Bench
VTB550B - Function test bench for high pressure valves
Functional test, internal & external leak test
• Test medium: pressure & air
• Test pressure: 2 ... 550 bar
• Volume flow: 0.1 ... 1000 cm³/min
• Use of laminar flow elements (LFE)
• High measuring accuracy
• Flexible device adaptation
17
Measurement & Calibration
DAkkS certification
Standards ISO 17025 & ISO 9001
Training & WorkshopsAt EP-site & In-house at customer
Calibration & Service
Full service provider
in measurement technology
Maintenance & Services
18
Services / Engineering & Consulting
Services from consulting & project planning to
construction & maintenance!
• We analyze, advise & support!
• Technical advice
• Process planning & construction
• Maintenance & service
• On-site support
19
Program system LabVIEW
Industrial software
Wonderware
C-Sharp
Software solutions
Program system PLC / SPS
Full service provider
in measurement technology
20
PC/LabView system
Complete system control, data capturing,
evaluation and visualization using LabView
by National Instruments
PLC systems
Complete system control, data capturing
and evaluation using PLC controls:
• Siemens S7
• Siemens LOGO
• Wago
Optional visualization solutions using
• Siemens WinCC
• Intouch by Wonderware
(Schneider Electric)