ELTE2.3 Wireless Access Device EA660 Configuration GuideV1.0(20140414)

eLTE2.2 Wireless Access Device eA660 Configuration Guide

Issue V1.0

Date 2014-04-14

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

iii

Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.

No part of this document may be reproduced or transmitted in any form or by any means without

prior written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective

holders.

Notice

The purchased products, services and features are stipulated by the contract made between Huawei and

the customer. All or part of the products, services and features described in this document may not

be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all

statements, information, and recommendations in this document are provided "AS IS" without warranties,

guarantees or representations of any kind, either express or implied.

The information in this document is subject to change without notice. Every effort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute a warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base

Bantian, Longgang

Shenzhen 518129

People's Republic of China

Website: http://www.huawei.com

Email: [email protected]

http://www.huawei.com/

mailto:[email protected]

eLTE2.3 Wireless Access Device eA660

Configuration Guide Contents

Contents

1 Change History ........................................................................................................................... 1-1

2 Overview ...................................................................................................................................... 2-1

2.1 About This Document ................................................................................................................................... 2-1

2.2 Purpose .......................................................................................................................................................... 2-1

2.3 Product Features ............................................................................................................................................ 2-1

3 Configuration Overview ........................................................................................................... 3-1

3.1 Device Configurability .................................................................................................................................. 3-1

3.2 Introduction to the CPEs ............................................................................................................................... 3-1

3.2.1 Introduction to Wireless Access CPEs ................................................................................................. 3-1

3.3 Configuration Principles and Instructions ..................................................................................................... 3-2

4 Material Configuration ............................................................................................................. 4-1

4.1 Configuration Overview ................................................................................................................................ 4-1

4.2 Configuration of Wireless Access CPEs........................................................................................................ 4-1

4.2.1 Configuration of the CPE Host ............................................................................................................ 4-1

4.2.2 Configuration of PoE Power Adapters ................................................................................................. 4-3

4.2.3 Configuration of CPE Installation Materials ........................................................................................ 4-5

5 Appendix ..................................................................................................................................... 5-1

5.1 Acronyms and Abbreviations ........................................................................................................................ 5-1

5.2 PoE Power Adapter Cables for Different Countries ....................................................... 错误！未定义书签。



1 Change History

Date Version Change Description Author

2014/4/14 V1.0 Released the first version. Zeng Xianqin



2 Overview

2.1 About This Document

This document provides guidelines for the configuration of eLTE2.3 wireless access products.

It introduces Huawei's current supply capability to marketing and supply chain personnel and

describes the components and configuration principles and instructions of eLTE2.3 wireless

access products.

2.2 Purpose This document is for internal use only. It provides instructions for actual sales and shipment.

2.3 Product Features

Platformization and serialization

The eLTE2.3 wireless access CPEs are based on the same platform. They support updates,

quick customization, and quick delivery.

The outdoor CPE adopts architecture of router plus modem, the two of which are connected

through a standard mini PCIe interface. By applying modems of different standards and bands

can be selected, we can ensure the quick delivery of product series and update of the wireless

access technology used.

3 Configuration Overview

3.1 Device Configurability The eLTE2.3 wireless access CPEs are sold by set. Customers can choose CPE hosts with

different standards and bands, as well as different accessories. The CPE hosts cannot be

configured during sales. This guide is used mainly to provide lists of products that can be

quoted and shipped.

3.2 Introduction to the CPEs

3.2.1 Introduction to Wireless Access CPEs

The eA660 series wireless products are LTE outdoor CPEs. They can be deployed outdoors to

convert between LTE wireless data and Ethernet data.

The eA660 series support LTE R8. They provide both wired and wireless Internet access and

the following services:

Data services

Security services

Maintenance and management

Data routing

Figure 3-1 shows the appearance of an eA660 outdoor CPE.

Figure 3-1 eA660 outdoor CPE

The eA660 mainly features the following:

Support for LTE and band customization

Dynamic Host Configuration Protocol (DHCP) and Network Address Translation (NAT)

IEEE 802.11 b/g/n WLAN(unavailable when LTE works at B40)

Routing behind MS

Firewall functions

Support for Windows XP, Windows Vista, Linux, and MAC

Compatible with IE, Firefox, Chrome, and Safari

Management over the web UI

Device management using TR-069

Built-in LTE high-gain antennas for great portability

External antennas ports

LED indicators that show device status

Exposed antenna ports

3.3 Configuration Principles and Instructions The CPE hosts themselves do not have configuration items. This document is used to help

realize the quotation and shipment of wireless access CPEs though the configurator

(CFG) without site survey.

The CFG lists the CPE host standards and bands, as well as accessory types and

quantities, which provides reference for quotation and shipment. The accessories selection

should be based on market demands.

Promptly and accurately convey product customization requirements to the headquarters

through an RM workflow (http://rm.huawei.com) and communicate with the headquarters to

determine the customization fees. The customization fees are manually added to the

configurator.

The configurator shows the sales parts and their unique list prices. For different projects, the

discount may vary. Refer to the supply chain opinions during contract review to

confirm whether the order quantity meets the order condition.

4 Material Configuration

The part numbers are for your reference only. They need further confirmation and update.

4.1 Configuration Overview The top layer for eLTE2.3 wireless access CPEs' part numbers is 01060602. The BOM list is

structured as follows:

Part Number Description

01060602 Wireless Access Unit

02230QKP eA660,Wireless Access Unit Main Equipment

02230QKQ eA660,POE Power

02230QKR eA660 Site Materials

4.2 Configuration of Wireless Access CPEs

4.2.1 Configuration of the CPE Host

Part number: 02230QKP

Description: eA660,Wireless Access Unit Main Equipment

External Model No.

B-Part Number

Description Quantity (Piece)

Configuration Principle

eA660-

118 V1R2

51070HLB Wireless user

Equipment,eA660-

118,TDD LTE Band 62

Band 39,Gray,Customer

Premises

Equipment,External

antenna

1 Mandatory, built-in antenna

LTE TDD:

1785 MHz to 1805 MHz


The product works with a SIM card, which is

sold separately in principle. To meet different

customer demands, the CFG provides blank

SIM cards, card burners, and the card-burning

service. For details, see the configuration

principles and instructions of the external CFG.

Sales part; this part number can be used

for quotation and shipment.

eA660-

160 V1R2

51070HLM Wireless user

Equipment,eA660-

160,TDD LTE Band 38

Band40,Gray,Customer

Premises

Equipment,External

antenna


LTE TDD:











eA660-

135 V1R2

51070FUF Wireless user

Equipment,eA660-

160,TDD LTE Band 42

Band43,Gray,Customer

Premises

Equipment,External

antenna


LTE TDD:











External Model No.

B-Part Number



eA660-

208V1R1

51070NRE Wireless user

Equipment,eA660-208

ews,LTE FDD

800M,Gray,Customer

Premises

Equipment,External

1 Mandatory. No built-in antenna, external

antenna only, the type and the code of

BOM should be selected by R&D

according to the site requirement.

LTE FDD:

(uplink: 832 MHz to 862 MHz;

downlink:791 MHz to 821 MHz)

(uplink: 824 MHz to 849 MHz;

downlink:869 MHz to 894 MHz)









4.2.2 Configuration of PoE Power Adapters

Part number: 02230QKQ

Description: eA660,POE Power

External Model No.

B-Part Number



W0ACPSE

00

02220015 Adapter,-10degC-

45degC,90V-

264V,54V/650mA,A

C 2pin/RJ45

8pin,CE/CCC,

Terminal Dedicated

1 Optional

If this PoE power adapter is required, a 2 m

external power cable is required for each

piece. The external power cable varies by

country.

Sales part; this part number can be used for

quotation and shipment.

C0C7EU20

0

04044216 Power

Cable,European AC

Power Cable

250V2.5A,2.0m,PCS

M,H03VVH2-F-

0.5mm^2(2C),C7SF,

Black

1 Optional

Used with 02220015; select the correct style

based on the country

One power cable for each 02220015.



External Model No.

B-Part Number



C0C7NA20

0

04044497 Power

Cable,America AC

Power Cable

125V7A,2.0m,PAS

M,18NISPT-

1(2C),C7SF,Black

The attachment below lists the types of the

power cable accepted by varied countries.

You can learn from the list that many

countries accept many types of power cable.

So the exact type should be decided by site

survey or the custom’s demand. if the exact

type cannot be confirmed for some reason,

the local sales can choose the first type

accepted by the country in the list, the local

sales should accept the risk of wrong

delivery.

Type of power cable accepted by varied countries.xlsx

C0C7AU20

0

04044577 Power

Cable,America AC

Power Cable

125V7A,2.0m,PAS

M,18NISPT2(2C),C

7SF,Black

C0C7UK20

0

04044533 Power Cable, Britain

AC Power Cable

250V2.5A,2.0m,PG

AM,H05VVH2-F-

0.75mm^2(2C),C7S

F,Black

C0C7JP200

04044496 Power Cable,Japan

AC Power Cable

125V7A,2.0m,PAS

M,VCTFK-

0.75mm^2(2C),C7S

F,Black

CPC7SF201

04043491 Power Cable,China

AC Power Cable

250V2.5A,2.0m,PA

SM,227IEC53(RVV

)0.75mm^2(2C),C7S

F,Black

0405G025 Power Cords

Cable,South Africa

AC Power

250V2.5A,2m,PDA

M,H03VVH2-F-

0.75^2(2C),C7SF

04050956 Power Cord

Cable,Brazil AC

Power

Cable,250V2.5A,2m

,PCSM,H05VVH2-F

2*0.75^2(2C),C7SF

External Model No.

B-Part Number



04050956 Power Cord

Cable,Brazil AC

Power

Cable,250V2.5A,2m

,PCSM,H05VVH2-F

2*0.75^2(2C),C7SF

04045094 Power Cords

Cable,India AC

Power

250V2.5A,2.0m,PCS

M-I,IS 694-

0.75^2(2C),C7S,Bla

ck

4.2.3 Configuration of CPE Installation Materials

Part number: 02230QKR

Description: eA660 Site Materials

Part Number Description

02230QKR eA660 Site Materials

02230UXF eA660 Cable and site installation

accessories materials

No sales part indication; middle-layer

part number

02230UXK eA660 Electric power cable No sales part indication; middle-layer

part number

02230UXM eA660 Installation parts No sales part indication; middle-layer

part number

Configuration of Network Cables and Site Installation Accessories

Part number: 02230UXF

Description: eA660 Cable and site installation accessories materials

External Model No.

B-Part Number

Description Quantity


STWICAB

SFTP5

25050238 Symmetry Twist

Cable,100ohm,SFTP

CAT5E,0.53mm,24

AWG,4Pairs,Black,

Outdoor Cable

10 m Used with 51079289, 51079286, or 51079282;

optional

By default, the cables for the PoE and Ethernet

ports are 10 m in total.

Frontline personnel can change the cable length

based on the project requirement.

Deployed outdoors; for countries with Low

Smoke Zero Halogen (LSZH) requirements,

purchased locally. If the cable cannot be

purchased locally, report using the OR workflow.

Shipped in rolls



EDSABA

G00

14080232 Network Interface

Connector,8PIN,8bit

,Shielded,Crystal

Model

Connector,23-

24AWG Single

Solid Wire,CAT6

5 pcs Shielded network port connector

Used with the network cable 25050238

By default, five pieces are provided for the PoE

and Ethernet ports in total.

When only applied on the PoE or Ethernet port,

provide three pieces.

The frontline personnel determine what to apply

based on customer requirements.



E000CMC

00

30040055 Plastic

Bag,Q/DKBA88400

070,Dual-Layer

Squeezing Antistatic

Self-Sealing Bag

1 pc Applicable to all countries

Used with the cable tie 21101259, naked

crimping terminal 14170023, or network port

connector 14080232



CBLTIEG

T00

21101259 DKBA0.480.0457,C

able

Tie,300*3.6mm,Blac

k,PA66,Anti-

Ultraviolet And

Anti-Freeze,(GT-

300IUV)

50 pcs Deployed outdoors

Used with the network cable 25050238



XELECB

W07

14170023 Naked Crimping

Terminal,OT,6mm^2

,M6,Tin

Plating,Insulated

Ring

Terminal,12~10AW

G,yellow

3 pcs Ground OT terminal

Used with the CPE host



Configuration of Electric Power Cables

Part number: 02230UXK

Description: eA660 Electric power cable

External Model No.

B-Part Number

Description Quantity Configuration Principle

C1006YG0

0

25030191 Wire,450/750V,6022

7 IEC 02(RV)

6mm^2,Yellow/Gree

n,44A

1 m The 25030191 is a ground cable deployed

outdoors in markets adopting non-American

standards; one cable for each eA660

The 25030576 is a power cable deployed

outdoors in markets adopting the American

standards; one cable for each eA660

By default, the ground cable is 1 m long and

used with the eA660 (51079289, 51079286, or 51079282).

Shipped in rolls



C10006G0

0

25030576

Power

Cable,600V,UL1015

,5.261mm^2,10AW

G,Green,42.5A

P-6mm^2-

YellowGre

en-LSZH

25030699 Power

Cable,450V/750V,H

07Z-

K&UL3386,6mm^2,

10AWG,Yellow/Gre

en,58A,Low Smoke

Zero Halogen Cable

1 m Applicable to all countries except China;

meets LSZH requirements.

Shipped in rolls

One cable for each eA660 (51079289,

51079286, or 51079282)



Configuration of the Installation Parts

Part number: 02230UXM

Description: eA660 Installation parts

External Model No.

B-Part Number


E00DKBA00 21150800 Engineering

Installation

Kit,DKBA0480280

0_48_140,quick-

lock hoop,Suitable

for installing the

pole(diameter 48 ~

114mm),pole

mounting,Hexagon

fastening

2 pcs Installation part for pole-mounted

installation. Selected based on the

diameter of the pole, For details, see the

"Description" column.

Used with the pole-mounted and wall-

mounted installation parts. Two pieces of

21150800, 21150804, or 21150810 for

one 21150905.

By default, the 21150800 is provided.


for quotation and shipment. E00DKBA04 21150804 Engineering

Installation

Kit,DKBA0480280

0_114_400,quick-

lock hoop,Suitable

for installing the

pole(diameter 114

~ 381mm),pole

mounting,Hexagon

fastening

E00DKBA10 21150810 Engineering

Installation

Kit,DKBA0480280

0_114_220,quick-

lock hoop,Suitable

for installing the

pole(diameter 114

~ 220mm),pole

mounting,Hexagon

fastening

ESCACSS00 21150905 Engineering

Installation

Kit,DKBA4070384

5.ASM,Small Cell

Al Casting

Support

Solid ,Small

Cell,Multifunctiona

l

Installation,Wedge

connection

1 pc Optional

One 21150905 for each eA660.



External Model No.

B-Part Number


ESCACAS0

0

21150903 Engineering

Installation

Kit,DKBA4070392

3.ASM,Small cell

Al Casting

Adjustable-degree

solid,Small

cell,Multifunctional

Installation,Wedge

connection.

1 pc Angle-adjusting installation part.

Optional.

The 21150903 must be used with the

21150905.

One 21150903 for each eA660.



5 Appendix

5.1 Acronyms and Abbreviations

Acronym and Abbreviation Full Spelling

DHCP Dynamic Host Configuration Protocol

DNS Domain Name Server

IP Internet Protocol

LAN Local Area Network

LED Light Emitting Diode

LTE Long Term Evolution

NAT Network Address Translation

CPE Customer Premises Equipment

WLAN Wireless Local Area Network

OR Offering Requirement

POE Power Over Ethernet

SIM Subscriber Identity Module

http://3ms.huawei.com/term/docMaintain/termOperate.do?method=listTermAndDefinition&f_id=20110429000099&fd_id=70393&node_id=1-9&searchType=fulltext&searchValue=SIM&caseSensitive=&language_t=cn

Documents

ELTE2.3 Wireless Access Device EA660 Configuration GuideV1.0(20140414)