8/10/2019 ElectricalCircuits Laboratory

1/4

Electrical Circuits (1:30- 3:30 pm)

Thursday, October 2, 2014

General Instructions:

Rewrite the experiment format below with the complete data and the needed parts to be filled up

(objectives, data tables, pertinent calculations, results and discussions & conclusion) in A4, handwritten.

The INDIVIDUAL output will be collected this coming Monday, October 5, 2014.

Laboratory Experiment No. 1

Kirchhoffs Laws

Objectives

(provide at least 3)

Materials Needed:

20 connecting leads (add more if the need arises)

Digital Multitester

Circuit Trainer

Set-up:

Data Table:

Table 1. Measured and Calculated Values

Resistor Measured Current Value Calculated Current Value Percent Error

R1

R2

R3

R4

R5

Note: Use another sheet to show the calculations of current in each resistor using KVL/KCL.

Interpretation of Data

(1 paragraph with at least 5 sentences)

Results and Discussions

(Must contain at least 2 paragraphs each with at least 5 sentences.

Cite at least 2 references properly using the appropriate format.)

Conclusion

(1 paragraph with at least 5 sentences)

References

Cite at least 2 references properly using the APA format.

8/10/2019 ElectricalCircuits Laboratory

2/4

Electrical Circuits (1:30- 3:30 pm)

Thursday, October 2, 2014

General Instructions:

Rewrite the experiment format below with the complete data and the needed parts to be filled up

(objectives, data tables, pertinent calculations, results and discussions & conclusion) in A4, handwritten.

The INDIVIDUAL output will be collected this coming Monday, October 5, 2014.

Laboratory Experiment No. 2

Maxwells Method

Objectives

(provide at least 3)

Materials Needed:

20 connecting leads (add more if the need arises)

Digital Multitester

Circuit Trainer

Set-up:

Data Table:

Table 1. Measured and Calculated Values

Resistor Measured Current Value Calculated Current Value Percent Error

R1

R2

R3

R4

R5

Note: Use another sheet to show the calculations of current in each resistor using Maxwells Method.

Interpretation of Data

(1 paragraph with at least 5 sentences)

Results and Discussions

(Must contain at least 2 paragraphs each with at least 5 sentences.

Cite at least 2 references properly using the appropriate format.)

Conclusion

(1 paragraph with at least 5 sentences)

References

Cite at least 2 references properly using the APA format.

8/10/2019 ElectricalCircuits Laboratory

3/4

Electrical Circuits (1:30- 3:30 pm)

Friday, October 3, 2014

General Instructions:

Rewrite the experiment format below with the complete data and the needed parts to be filled up

(objectives, data tables, pertinent calculations, results and discussions & conclusion) in A4, handwritten.

The INDIVIDUAL output will be collected this coming Monday, October 5, 2014.

Laboratory Experiment No. 3

Nodal Method

Objectives

(provide at least 3)

Materials Needed:

20 connecting leads (add more if the need arises)

Digital Multitester

Circuit Trainer

Set-up:

Data Table:

Table 1. Measured and Calculated Values

Resistor Measured Current Value Calculated Current Value Percent Error

R1

R2

R3

R4

R5

Note: Use another sheet to show the calculations of current in each resistor using Nodal Method.

Interpretation of Data

(1 paragraph with at least 5 sentences)

Results and Discussions

(Must contain at least 2 paragraphs each with at least 5 sentences.

Cite at least 2 references properly using the appropriate format.)

Conclusion

(1 paragraph with at least 5 sentences)

References

Cite at least 2 references properly using the APA format.

8/10/2019 ElectricalCircuits Laboratory

4/4

Electrical Circuits (1:30- 3:30 pm)

Friday, October 3, 2014

General Instructions:

Rewrite the experiment format below with the complete data and the needed parts to be filled up

(objectives, data tables, pertinent calculations, results and discussions & conclusion) in A4, handwritten.

The INDIVIDUAL output will be collected this coming Monday, October 5, 2014.

Laboratory Experiment No. 4

Superposition Method

Objectives

(provide at least 3)

Materials Needed:

20 connecting leads (add more if the need arises)

Digital Multitester

Circuit Trainer

Set-up:

Data Table:

Table 1. Measured and Calculated Values

Resistor Measured Current Value Calculated Current Value Percent Error

R1

R2

R3

R4

R5

Note: Use another sheet to show the calculations of current in each resistor using Nodal Method.

Interpretation of Data

(1 paragraph with at least 5 sentences)

Results and Discussions

(Must contain at least 2 paragraphs each with at least 5 sentences.

Cite at least 2 references properly using the appropriate format.)

Conclusion

(1 paragraph with at least 5 sentences)

References

Cite at least 2 references properly using the APA format.