El Aletleri

HAND TOOLS

CRIMPINGTOOLS

2

CRIMPER 6 - 562113

Cable Cross-Section 0,25-6,0mm² (AWG 24-10)

Crimping Technic Linear

Terminal Insertion Front

Self-Adjustment Automatic

• Automatic adjustment to the wire cross-sections

• Continuous precision crimp over the full length of the ferrule

• Full cycle ratchet operation (with release) assuring a complete crimp

• Perfect fit to hand ergonomics

• Patented crimping technology

Terminal / Connector Type

Crimping Profile

CRIMPINGTOOLS

3

CRIMPER F 10 R - 562125

Cable Cross-Section 0,08-10 mm² (28-8 AWG)

Crimping Technic Linear

Terminal Insertion Side

Self-Adjustment Automatic

• Crimping of wire end ferrules with or without insulation

• High-precision crimping results

• Ergonomically designed soft handles with non-slip grip material for comfortable

working.

Terminal / Connector Type

Crimping Profile

CRIMPINGTOOLS

4

CRIMPER F 10 L - 562126

Cable Cross-Section 0,5-10 mm² (20-8 AWG)

Crimping Technic Linear

Terminal Insertion Front

• Automatic adjustment to the wire cross-sections

• High precision crimping

• Releasable ratchet ensures the complete crimping process

• Ergonomically designed soft handles with non-slip grip material for comfortable

working.

Terminal / Connector Type

Crimping Profile

CRIMPINGTOOLS

5

CRIMPER N 16 H - 562124

Cable Cross-Section 0,08-16 mm²

Crimping Technic Linear

Terminal Insertion Side

• Automatic adjustment between 0,08 - 16 mm²

• Required hand force reduced by 30%

• Hexagonal crimping

• Releasable ratchet ensures the complete crimping process

• Ergonomically designed soft handles with non-slip grip material for comfortable

working.

Terminal / Connector Type

Crimping Profile

CRIMPINGTOOLS

6

CRIMPER N 16 L - 562117

Cable Cross-Section 0,14-16,0 mm²

(26-20;18-16; 14; 12; 10; 8; 6 AWG)

• Releasable ratchet ensures the complete crimp process

• Special-designed ergonomic handles prevents slipping

• Ergonomically designed soft handles with non-slip grip material for comfortable

working.

Terminal / Connector Type

Crimping Profile

CRIMPINGTOOLS

7

CRIMPER N 50 L - 562119

Cable Cross-Section 10,0-50,0 mm² (8;6;4;2;1 AWG)

• Releasable ratchet ensures the complete crimping process

• Ergonomically designed soft handles with non-slip grip material for comfortable

working.

Terminal / Connector Type

Crimping Profile

CRIMPINGTOOLS

8

CRIMPER IT 6 S - 562120

Crimping Range Red 0,5-1,0 ( 20-18 AWG)

Blue 1,5-2,5 (16-14 AWG)

Yellow 4,0-6,0(12-10 AWG)

• Red/blue/yellow round type DIN cable lugs, pin cable lugs, female FASTON

cable lugs, male FASTON cable lugs, male terminals, cable joints

• Ergonomically designed soft handles with non-slip grip material for comfortable

working.

Terminal / Connector Type

Crimping Profile

9

CABLESTRIPPERS

STRIPPER 16 - 562114

Cable Cross-Section 0,03-16 mm²

Terminal Insertion Front

• Striping and cutting of stranded and solid wires with PVC insulation of 0,03 to 16 mm²

• Self-adjustment for all cross-sections with POWER PLUS feature

• Adjustable stripping length 3 - 21 mm

• Ergonomically designed soft handles with non-slip grip material for comfortable working.

SPARE KNIFE SET - 562127

9

10

CABLESTRIPPERS

STRIPPER 28 C - 562123

Cable Diameter Ø4,5 – 29 mm

• Cable stripping as lane with patented stripping mode

• Maximum performance with less effort

• High strength special steel

10

1111

CABLECUTTING TOOLS

CUTTER 16 - 562110

Cable Cross-Section 0,03 to 70 mm²

• For burr-free cutting of standard wire cables

• Wide application range from 0,03 up to 70 mm²

• Blades with serrated edge

• Low hand force

• Soft-grips

12

CABLECUTTING TOOLS

CUTTER 32 - 562122

Cable Cross-Section Solid:max. 25/15 mm AL/CU diameter

Stranded:max. 32 mm diameter or 300 mm²

• High tempered special steel

• Locking lever

• Step-wise and burr-free cutting

• Unlocking possibility in every position

• Hand tool model

• Ergonomically designed soft handles with non-slip grip material for comfortable

working.

13

HAND TOOL SET STRIP & CRIMP SET 1 - 562128

Cable Cross-Section 0,03-16 mm²

Terminal Insertion Front

Cable Cross-Section 0,08-16 mm²

Crimping Technic Linear

Terminal Insertion Side

CRIMPER N 16 H - 562124

STRIPPER 16 - 562114

CRIMPER N 16 H - 562124

STRIPPER 16 - 562114

WIRING DUCTCUTTING TOOLS

RAILCUTTING TOOL

KKMR553230

KMK 1002553220

KRKM500650

• Burr-free cutting of

wiring ducts and wiring

duct covers

• Straight or 45º cutting

options

• Equal force distribution

across blades helps

homogenous cutting

• Cutting up to 100 mm

width

• 3 different cutting slots

• Clean Cut

• Lossless cutting

• Non-blunting knife

• Length adjustment

guide

• Cover cutting

• Burr-free cutting

• Non-blunting knife

• Length adjustment

guide

• Cutting up to 125 mm

width

Cutting Type Straight

Max. Width 125 mm

LengthAdjustment

100 cm

CuttingThickness

1.5 mm

CuttingCapacity

7.5x35 mm15x35 mm Tij Ø8mm

LengthAdjustment 100 cm

14

SCREWDRIVERS

15

NON-ISOLATEDSCREWDRIVERS

Order. No. Type Description

561 010 IKT 1 2,5x75 - Flat

561 020 IKT 2 3,0x100 - Flat

561 030 IKT 3 3,5x100 - Flat

561 040 IKT 4 4,0x125 - Flat

561 050 IKT 5 5,5x150 - Flat

561 060 IKT 6 6,5x200 - Flat

Order. No. Type Description

561 110 KK 1 140 mm.

561 120 KK 2 180 mm.

Order. No. Type Description

560 010 KT1 2,5x75 - Flat

560 020 KT2 3,0x100 - Flat

560 030 KT3 3,5x100 - Flat

560 040 KT4 4,0x125 - Flat

560 050 KT5 5,5x150 - Flat

560 060 KT6 6,5x200 - Flat

ISOLATEDSCREWDRIVERS

MAINS TESTER

EL ALETLERI BROSUR EN

293475616075826576000001

6.6.4.2.2.00249

Revis

ion

No:

171

1201

6

FactoryKemalpaşa Yolu 3. km 35170İzmir / TURKEYTel : +90 232 877 08 00Fax: +90 232 877 08 06

OVERSEAS OFFICES

Sales Head OfficeMaslak Mah. Ahi Evran Cad. Ata Center İş Merkezi No: 9 Kat: 4Maslak, Sarıyer - Istanbul / TURKEY Tel : +90 212 222 52 00Fax: +90 212 222 66 55

Russian Federation141400, Khimki, Zavodskaya 2 - MoscowTel: +7 495 644 02 21

ChinaRm. 1707, No. 218, Hengfeng Road, Morden Traffic Business Building, Zhabei District, Shanghai. 200070Tel : +86 21 62260338Fax: +86 21 62263983

USA525 N. Tryon St.Suite 1600 Charlotte, NC 28202Tel: +1 980 226 06 88

U.A.EZ Building Z 57 Saif Zone, SharjahTel : +971 6 - 557 37 10Gsm: +971 56 - 760 28 37

Ukraine6 - 8A, Yaroslava Ivashkevicha Str.Office 7 - 8 04074, KievTel: +380 637 217 185

ColombiaGsm: +57 304 427 73 59

IndonesiaGsm: +62 8787 100 40 99

MexicoGsm: +52 55 4511 8809

IranNo. 592 - 594 Corner of Aghabalazadeh St. South Kargar Ave. TehranTel : +9821 55425407-9Fax: +9821 55425407-9

Thailand30 - 68 Soi Rawadee 29 TiwanonRoad Nonthaburi ThailandTel: +66 83 299 5465

www.klemsan.com