EIVA SOFTWARE PROFILE WITH PRICESnavglobalng.com/wp-content/uploads/2020/10/EIVA-SOFTWARE... · 2020. 10. 5. · The EIVA NaviSuite Uca dredging software offers you a 3D solution

EIVA SOFTWARE PROFILE WITH PRICES

NaviSuite Nardoa Advanced 3D pipeline & cable route inspection software

The NaviSuite Nardoa is a cutting-edge, completely integrated 3D software solution for acquisition and processing of data during subsea pipeline and cable route inspections. This proven, off-the-shelf software bundle allows you to save man-hours and money while delivering high-quality, thorough and comprehensive inspection results to your customers. It encompasses the following software products – and can be upgraded with our NaviSuite Deep Learning option for high-performance, automatic data processing with both classification and segmentation of images and videos during subsea pipeline inspections.

SUBSCRIPTION

€13,165.00 excl VAT, excl shipping fee

PARMANENT


NaviSuite Uca Dredging monitoring software with real-time volume calculation

Developed in close collaboration with dredging sensor specialists and customers, this user-friendly 3D software brings an array of features for efficient and precise dredging operations, volume calculations and reporting. This means less time spent in the cab and creating reports. The result is a reduced time-frame of your operations, from pre-survey to end-report. 3D dredging software By combining pre-survey multi-beam data with GPS, and data from sensors added to the clamshell, suction tube, or bucket, the 3D reconstruction of the dredge site virtually gives operators underwater vision. You can easily combine the NaviSuite Uca 3D software with a number of optional extras to create a customised solution that will match your dredging setup for heightened precision.

The EIVA NaviSuite Uca dredging software offers you a 3D solution that will streamline your dredging operations by as much as 50%, saving both time and money.

SUBSCRIPTION


PARMANENT


NaviSuite Beka Efficient software solution for anchor/riser handling and cable/flexpipe lay operations NaviSuite Beka is our software bundle for everything that has to do with operations involving catenaries, that is, operations involving anchors, cables, flexpipes, risers, etc. It combines anchor handling and catenary data acquisition, ROV inspection, and reporting in a single tool that covers both operation planning and execution. This simplifies the work process and reduces the risk of calculation errors that comes with using multiple

software tools.

What's included in the NaviSuite Beka anchor handling and catenary solution NaviSuite Beka comes with the following software components:

• NaviPac Pro • Rig move and tug management option • Catenary and Lay option

SUBSCRIPTION


PARMANENT


NaviSuite Kuda Acquisition Affordable software with deep feature list for shallow water surveys Benefit from the advanced features of the NaviSuite products that are bundled in the NaviSuite Kuda solution, dedicated to shallow water surveys. It aims to offer you all the necessary tools to carry out time-efficient bathymetry operations that result in extensive end reports with high-quality data.

NaviSuite Kuda Acquisition allows for navigation, survey planning and data acquisition with multi-beam echo sounders, sidescan sonars, subsea lasers, LiDAR scanners, magnetometers, etc in connection with hydrographic surveys.

SUBSRIPTION


PARMANENT


NaviSuite Kuda Acquisition Pro Affordable software with deep feature list for shallow water surveys Benefit from the advanced features of the NaviSuite products that are bundled in the NaviSuite Kuda solution, dedicated to shallow water surveys. It aims to offer you all the necessary tools to carry out time-efficient bathymetry operations that result in extensive end reports with high-quality data.

NaviSuite Kuda Acquisition Pro allows for navigation, survey planning and data acquisition with multi-beam echo sounders, sidescan sonars, subsea lasers, LiDAR scanners, magnetometers, etc in connection with hydrographic surveys. Moreover, in contrast to NaviSuite Kuda Acquisition, this Pro version allows for unlimited, complex underwater objects and remote displays.

SUBSCRIPTION €5,998.00 excl VAT, excl shipping fee

PARMANENT €17,995.00 excl VAT, excl shipping fee

NaviPac Pro

NaviPac provides positioning and navigation features for surface and/or subsea vehicles. It comes in four variants: NaviPac Pro, the variant you see here: • NaviPac Single User, which offers all the features of NaviPac

Pro, limited to a single network/remote client and a single subsea object

• NaviPac Lite, which is tailored to vessel-based surveys with a single beam echo sounder

• NaviPac Tug, which is dedicated to the tug boat during anchor handling operations, rig moves and similar jobs

With NaviPac Pro, you get the most elaborate variant of the three and can thus benefit from the entire range of features offered by NaviPac for surveys carried out with multi-beam echo sounders, side-scan sonars and/or lasers.



Catenary and Lay option for NaviPac Pro or NaviModel The Catenary and Lay option product offers advanced anchor, riser and cable simulation for planning or real-time monitoring purposes. This includes:

Real-time calculation of anchor/riser position in water based on materials, actual positions and water current measurements

Real-time calculation of tensions using actual rig/barge position and known anchor positions. Useful for monitoring of anchored structures without need tension measurement sensors

Real-time estimation of cable lay touch down based on cable tension and departure angle

The algorithm uses a physics emulation engine for material’s behavior in water, and is configured to the actual cable/chain/riser parameters, buoys and water currents.

For planning purposes, the catenary features offer an excellent way of defining anchors patterns and positions based on desired tensions. Due to the instant recalculation, changes to a plan can easily be made during an operation as well.



Rig Move and Tug Management Option

For Navipac Pro The Rig move and tug management option for NaviPac Pro is a planning and real-time solution for rig moves, anchor handling and tug boat control. This option is to be installed on the rig/barge, typically used together with a number of tug boats with their own NaviPac Tug licence on board.

It is included in NaviSuite Beka and available for purchase for existing NaviPac Pro customers who wish to upgrade their solution with rig move and tug management features.

Features include:

• Anchor handling (up to 16 anchors)

• Mid-line buoys positioning and visualisation

• Vessel data exchange via WIFI or telemetry

• Automated tug control (zoom, pan, anchor control (assignment, pick-up/drop, de-assignment), runlines, waypoints, messaging)

• After-operation RIGCrawl utility


PARMANENT


NaviPac Lite NaviPac provides positioning and navigation features for surface and/or subsea vehicles. It comes in four variants:

• NaviPac Lite, the variant you see here

• NaviPac Pro, the most elaborate variant

• NaviPac Single User, which offers all the features of NaviPac Pro, limited to a single network/remote client and a single subsea object


NaviPac Lite is tailored to vessel-based surveys with a single beam echo sounder. Thereby, it allows you to benefit from the advanced features of NaviPac without compromising your budget if your setup does not include lasers or additional sonars.

You get the same features as NaviPac Pro in terms of quality control, display options and navigation management, minus the features dedicated to laser, side-scan sonar and multi-beam echo sounder data. Interface is limited to two GPS receivers or similar, one gyro, one motion sensor, one single beam echo sounder and one output for annotation, etc.

SUBSCRIPTION €998.00 excl VAT, excl shipping fee


NaviPac Single User

NaviPac provides positioning and navigation features for surface and/or subsea vehicles. It comes in four variants:

• NaviPac Single User, the variant you see here

• NaviPac Pro, the most elaborate variant

• NaviPac Lite, which is tailored to vessel-based surveys with a single beam echo sounder


With NaviPac Single User, you get all the advanced features of NaviPac Pro, limited to a single network/remote client (one master and one remote Helmsman's Display) and a single subsea object (for example a towfish or an ROV).

PARMANENT


SUBSCRIPTION


NaviPac Tug NaviPac provides positioning and navigation features for surface and/or subsea vehicles. It comes in four variants:

NaviPac Tug, the variant you see here

NaviPac Pro, the most elaborate variant

NaviPac Single User, which offers all the features of NaviPac Pro, limited to a single network/remote client and a single subsea object

NaviPac Lite, which is tailored to vessel-based surveys with a single beam echo sounder

NaviPac Tug is dedicated to the tug boat during anchor handling operations, rig moves and similar jobs and can only be applied in operations controlled centrally from a barge that has NaviPac Pro and the Rig move and tug management option on board. NaviPac Tug offers all the relevant features for this type of job for the crew members on the tug with focus on features revolving around data exchange and remote control, among others. By limiting the features for survey operations and the use of remote licences, we are able to offer you a NaviPac variant which allows you to benefit from the advanced features of NaviPac without compromising your budget.



NaviScan

NaviScan acquires data from all major pipe/cable trackers and sonars on the market, including multibeam echo sounders, scanning and profiling sonars and conventional side-scan sonars. Features include:

• Laser/LiDAR, side-scan and multi-beam acquisition

• Real-time sensor monitoring

• Sensor-compensated real-time digital terrain model

• Sonar coverage display

• Sonar waterfall display

• 2D and 3D real-time display



Workshop Licence The Workshop Licence is the optimal tool if you wish to have a test platform for NaviScan/NaviPac Pro at your company’s premises.

It allows you to have a fully operational software installation, at reduced cost compared to licences used at sea. This means that you can test interfacing of new equipment, trouble shoot and plan new mobilisations, without having to move your other licence dongles around.

The Workshop Licence comes with the same features as the NaviScan and NaviPac Pro licences, but is restricted for use within 50 meters of the location of its initial installation.

PARMANENT €995.00 excl VAT, excl shipping fee


NaviSuite Perio – Redundant Rack This is one out of four hardware packages to choose from for the NaviSuite Perio software ensuring higher uptime and for failover, and includes the following:

• Rack with built-in display, keyboard, etc.

• 2 industry rack computers

• EIVA software installed and configured

• EIVA AIS transmitter

• UPS rack unit

• 2 AIS antennas

• 2 GPS antennas

• Standard mounting brackets

• 2 100 m antenna cables

Please note that power and mounting of antenna are not included. Nor is the NaviSuite Perio software, but when the software is purchased together with the redundant rack, a back-up licence is included free of charge.

PRICE: €27,995.00 excl VAT, excl shipping fee

NaviSuite Perio – Software NaviSuite Perio allows you to accurately deploy multiple virtual buoys (up to 250 via a single transmitter) for AIS navigation aids at a fraction of the cost of physical buoys.

NaviSuite Perio offers a unique approach to navigational aiding, by enabling you to deploy a high number of any buoy type as virtual buoys so they appear correctly on AIS displays on nearby vessels. This is an alternative or a supplement to the deployment of physical buoys.

Typical use includes:

• Marking the deepest part of the sailing channel for extra large vessels approaching

• Marking temporary construction areas, cable lay areas, etc

• Marking subsea equipment such as towed seismic equipment or the EIVA ScanFish

ANNUAL SUBSCRIPTION ONLY €5,995.00excl VAT, excl shipping fee

NaviSuite Mobula Core (VideoRay Pro 4) A complete software solution for ROV operations

Benefit from the advanced features of the NaviSuite products that are bundled in the NaviSuite Mobula solution, which is a complete topside software for your ROV. NaviSuite Mobula comes in different variants, allowing you to upgrade if you want to make use of sonar features.

NaviSuite Mobula is available in two variants for owners of VideoRay Pro 4 ROVs:

• NaviSuite Mobula Core (VideoRay Pro 4), which is described here

• NaviSuite Mobula Core + Sonar (VideoRay Pro 4), which adds capabilities for integration with a forward-looking sonar

Please note that NaviSuite Mobula is also available in variants dedicated to BlueROV units. If your ROV model is not supported,

EIVA will happily work with the producer to integrate it.

ANNUAL SUBSCRIPTION ONLY €499.00excl VAT, excl shipping fee

NaviSuite Mobula Core + Sonar

(VideoRay Pro 4)

A complete software solution for ROV operations


NaviSuite Mobula is available in two variants for owners of VideoRay Pro 4 ROVs:

• NaviSuite Mobula Core (VideoRay Pro 4), which is the basic variant

• NaviSuite Mobula Core + Sonar (VideoRay Pro 4), described here and which adds capabilities for integration with a forward-looking sonar

Please note that NaviSuite Mobula is also available in variants dedicated to BlueROV units. If your ROV model is not supported, EIVA will happily work with the producer to integrate it.


NaviSuite Mobula Core (BlueROV2) A complete software solution for ROV operations


Variants

NaviSuite Mobula is available in two variants for owners of BlueROV2 units:

• NaviSuite Mobula Core (BlueROV2), which is described here

• NaviSuite Mobula Core + Sonar (BlueROV2), which adds capabilities for integration with a forward-looking sonar

Please note that NaviSuite Mobula is also available in variants dedicated to VideoRay Pro 4 ROVs. If your ROV model is not supported, EIVA will happily work with the producer to integrate it.

ANNUAL SUBSCRIPTION ONLY €299.00 excl VAT, excl shipping fee

NaviSuite Mobula Core + Sonar (BlueROV2) A complete software solution for ROV operations


Variants:

NaviSuite Mobula is available in two variants for owners of BlueROV2 units:

• NaviSuite Mobula Core (BlueROV2), which is the basic variant

• NaviSuite Mobula Core + Sonar (BlueROV2), described here and which adds capabilities for integration with a forward-looking sonar

Please note that NaviSuite Mobula is also available in variants dedicated to VideoRay Pro 4 units. If your ROV model is not supported, EIVA will happily work with the producer to integrate it.


NaviSuite Deep Learning – Pipeline Inspection

Let software do the eventing work for you

The NaviSuite Deep Learning – Pipeline Inspection software is able to automatically detect objects during subsea pipeline inspection and survey jobs – ensuring you high-quality data and a massive reduction in man-hours.

The deep learning technology allows for high-performance data processing with both classification and segmentation of images and videos. NaviSuite Deep Learning can identify many different object types, including pipes, anodes, joints, damages, boulders and debris.

It is an add-on software product for the NaviSuite Nardoa bundle for pipeline inspections. It is offered as an annual subscription on the use of the deep learning features available in the NaviSuite products NaviPac (dedicated to navigation and positioning) and NaviModel (dedicated to 3D/4D modelling and visualisation, which are included in NaviSuite Nardoa.


NaviSuite Kuda Acquisition and Processing

NaviSuite Kuda Acquisition and Processing allows for navigation, survey planning and hydrographic data acquisition/processing with multi-beam echo sounders, side scan sonars, subsea lasers, LiDAR scanners, magnetometers, etc. in connection with hydrographic operations.

Please note: For every licence purchased, you get a single dongle or a single subscription licence with NaviPac Single User, NaviScan, NaviEdit Pro, NaviModel Producer (including EC-3D cleaning and Workflow Manager – Desktop) and NaviPlot.

Get a free 30-day trial package

EIVA offers all shallow water survey professionals who are new to the EIVA NaviSuite software world a 30-day free trial package on the NaviSuite Kuda software, no strings attached.

SUBSRIPTION €6,332.00 excl VAT, excl shipping fee


NaviSuite Kuda Single Beam Acquisition and Processing

NaviSuite Kuda Single Beam Acquisition and Processing allows for navigation, survey planning and hydrographic data acquisition/processing with single beam echo sounders, magnetometers and other single source input sensors.

Please note: For every licence purchased, you get a single dongle or a single subscription licence with NaviPac Lite, NaviEdit Lite, NaviModel Single Beam (special version for this NaviSuite Kuda variant), and NaviPlot.

Get a free 30-day trial package

EIVA offers all shallow water survey professionals who are new to the EIVA NaviSuite software world a 30-day free trial package on the NaviSuite Kuda software, no strings attached.



NaviModel Producer NaviModel offers high-performance digital terrain models in 2D and 3D and high-tech tools for model analyses and manipulations.

This includes carrying out comparison over time by visualizing the development between different datasets from the same site, acquired at different points in time – what we call 4D.

NaviModel comes in three variants:

• NaviModel Producer – the variant you see here

• NaviModel Analyzer

• NaviModel Free Viewer

With the NaviModel Producer variant, you get the complete software solution comprising all the features of NaviModel for data processing, cleaning, modelling and reporting.



NaviModel Analyser

NaviModel offers high-performance digital terrain models in 2D and 3D and high-tech tools for model analyses and manipulations.

This includes carrying out comparison over time by visualizing the development between different datasets from the same site, acquired at different points in time – what we call 4D.

NaviModel comes in three variants:

• NaviModel Analyzer – the variant you see here

• NaviModel Producer

• NaviModel Free Viewer

The NaviModel Analyzer variant allows you to process, combine, visualize and analyze the delivered data from subsea inspection service companies. It is tailored to companies who would like to obtain and record as much information as possible from the data they have on their offshore sites and structures.



3D pipe option for NaviModel Producer

The 3D pipe option for NaviModel Producer allows for efficient, model- and scan-based pipeline and cable route inspection, eventing and editing carried out with ROVs, ROTVs, AUVs and vessels.

The 3D pipe option for NaviModel Producer allows for efficient, model- and scan-based pipeline and cable route inspection, eventing and editing carried out with ROVs, ROTVs, AUVs and vessels.

Features include

• Digital and mathematical identification of pipe and cable

• Integration of pipe and cable tracker data

• Creation of pipe/cable, trench and seabed markers

• Export to GIS and various oil companies' formats

• Integration of video

• Full eventing package



Workflow Manager – Server The Workflow Manager is a configurable workflow process automation tool. In other words, it allows you to automate the small steps you normally go through when processing subsea data.

The software is designed to enable a previously unseen degree of automatic data processing of massive amounts of subsea sensor data and comes in three variants:

• Workflow Manager – Server, which is described here

• Workflow Manager – Desktop, which is available for free when purchasing NaviEdit Pro and NaviModel Producer licences and is limited to being able to run one NaviEdit and one NaviModel task in parallel

• Workflow Manager – Onboard computer, which is a small Microsoft Windows electronics board suitable for integration into AUVs, USVs, etc

Workflow Manager – Server can run an unlimited number of NaviEdit and NaviModel workflow steps (the NaviSuite products dedicated to navigation/positioning and data modelling/visualization respectively) in parallel, typically 30-100.

The result is a significant parallelization of processing for large data sets, and significant savings in terms of man-hours spent on data processing.

Please note: This product is only available as annual subscription.


NaviEdit Pro Survey data editing

NaviEdit allows for editing of overall survey settings, raw sensor data and geodetic settings. This applies to data recorded with NaviSuite products as well as third-party software products, such as Kongsberg SIS, Hypack, GSF, etc.

The software comes in two variants:

• NaviEdit Lite, which is restricted to import of single source input data types

• NaviEdit Pro, the variant described here, which offers the most extensive list of features.

NaviEdit Pro enables import of various types of laser and sonar data, including multi-beam echo sounders and side-scan sonars. Moreover, it can be used for seismic streamer positioning.

Please note that the software requires a Microsoft SQL database. The free version, SQL Server Express, is included in the software. For NaviEdit to use a data base larger than 10 GB would require a SQL Server Standard (or Enterprise) version.

Let software do the hard data processing work

Among other features, NaviEdit Pro includes the Workflow Manager – Desktop tool, which you can learn more about below.



NaviEdit Lite Survey data editing

NaviEdit allows for editing of overall survey settings, raw sensor data and geodetic settings. This applies to data recorded with NaviSuite products as well as third-party software products, such as generic ASCII readers.

The software comes in two variants: NaviEdit Pro and the variant described here, NaviEdit Lite, which is restricted to import of single source input data types, such as data from single beam echo sounders and magnetometers, as well as positioning solutions.

Please note that the software requires a Microsoft SQL database. The free version, SQL Server Express, is included in the software.

SUBSRIPTION €665.00 excl VAT, excl shipping fee


QuickStitch powered by EIVA

The QuickStitch software solution is a NaviModel variant made for Teledyne BlueView. It is a point cloud viewing, cleaning, and alignment software package, specifically designed to streamline the cleaning and alignment of multiple point clouds based on all XYZ data. This includes point clouds created by the BV5000 3D Multibeam Scanning Sonars with overlapping data.

After the 3D point cloud data is collected in the field, the data is processed into the final deliverable point cloud: a clean aligned mosaic of the areas scanned.

Features

Editing data/cleaning noise

• Manual drag and drop registration

• Point to point registration

• Surface to surface registration

• Auto-registration

• Profile mode for registration quality checks

• Enhanced display modes for easier data viewing, including combination of multiple 3D views in a single display and different lighting techniques


OFFICIAL EIVA REPRESENTATIVE IN EAST AND WEST AFRICA

CONTACT US

Head Office: 2 Chief Anyiebe Str, Trans Amadi, Port-Harcourt, Nigeria, PMB 049.

Mobile: 084-555-528, 09065848065

Email: [email protected]

Web: www.navglobalng.com

Documents

EIVA SOFTWARE PROFILE WITH PRICESnavglobalng.com/wp-content/uploads/2020/10/EIVA-SOFTWARE... · 2020. 10. 5. · The EIVA NaviSuite Uca dredging software offers you a 3D solution