Efficient solutions – 50 Hz Wilo General Overview 2018...technologies user-friendly, simple to operate, energy- efficient and powerful for our customers. In the end, the main focus

DISCOVER ADDITIONAL

DIGITAL CONTENT

Wilo General Overview 2018Efficient solutions – 50 Hz

Our product and system solutions for Heating, Air conditioning, Cooling, Water supply as well as Drainage and sewage.

The Wilo-Stratos MAXO delivers the easiest solution for increasingly complex market demands. The pump sets new standards for system efficiency, convenience and flexibility: the perfect fit for every application, it also ensures optimal efficiency in building complexes thanks to its innovative energy saving functions. Installation and operation are also incredibly easy with the Wilo-Stratos MAXO. Experience the future of pump technologies which we are harnessing to make your life easier today.

NOW. PUMP TECHNOLOGY OF THE FUTURE.

WILO-STRATOS MAXO, THE WORLD´S FIRST SMART-PUMP*.

Wilo – Technology of the future ........................................................................... 4 – 9Smart solutions for a better tomorrow.

Heating, air conditioning, cooling .....................................................................10 – 27Networked solutions for an optimal indoor climate.

Water supply ........................................................................................................28 – 49Intelligent technologies to combat water shortages.

Drainage and sewage ..........................................................................................50 – 65Reliable waste water systems for growing cities.

Service and support ............................................................................................66 – 69Practical support for your daily work.

* Weunderstandasmart-pumpasanewcategoryofpumps,whichgoesfarbeyondourhigh-efficiencypumpsorpumpswithpumpintelligence.Onlythecombination of the latest sensor technology and innovative control functions (e.g. Dynamic Adapt plus and Multi-Flow Adaptation), bidirectional connectivity (e.g. Bluetooth, integrated analogue inputs, binary inputs and outputs, Wilo Net interface), software updates and excellent usability (e.g. thanks to the Setup Guide, the preview principle for predictive navigation and the tried and tested Green Button Technology) make this pump a smart-pump.

Wilo –Technologyofthefuture4

SMART SOLUTIONS FOR A BETTER TOMORROW.

Wilo is a premium supplier for building services, water management and industrial applications. We make complex technologies user-friendly, simple to operate, energy- efficientandpowerfulforourcustomers.Intheend,themain focus of everything we do is people. We offer them outstanding products, system solutions and services. Founded in Dortmund in 1872 as a factory for copper and brass goods, Wilo has evolved from being a local specialist to a global player in the course of its long and successful history.

We are well-acquainted with questions that will shape our future and we develop technologies that provide answers. Global megatrends are having a profound and lasting im-pact on our lives. As we address these trends, we concen-trate on globalisation, urbanisation, climate change, energy shortage, water shortage as well as digital transforma-tion –importantissuesforyourday-to-daywork.Whichmakes them important to us, too.

Amongst these megatrends, digital transformation is a prime topic. Digitalisation is having a fundamental impact onconsumerdemands,productionmethods,workflowsand production routes. It provides new possibilities in terms of functions and applications that were unthinkable just a few short years ago. We recognise the opportunities that digitalisation brings and leverage them to make the future a better place and enhance people’s daily lives. In the process, we have emerged as a digital pioneer in the industry.

Big data is the valuable raw material of digitalisation and we harness its power. To tap the incredible potential of this exponential resource, we are transforming our processes inthedigitalworld –forforward-looking,networkedandvaried results. We analyse relevant data and conduct spe-cificevaluations.Basedonthesystematicassessmentofexisting data, we develop new business models as well as customised digital product features for our pumps, applica-tions and services.

We do it all with a precise objective: through the intelli-gent networking of people, products, services, factories and machines, we effectively harness the potential of digitalisation to create smart solutions. Every day, around 7,600 employeesworldwideworktomakethatclaimareal-ity.At16 productionsitesinmorethan60 subsidiariesin60 countries.Theresult:pioneeringnewproducts,systemsand services. Making life easier for our customers and the future a better place.

5

SMART SOLUTIONS FOR A BETTER TOMORROW. W

ilo –

Tec

hnol

ogy

of th

e fu

ture

INNOVATIONS FOR A BRAND-NEW WORLD.

In a globalised world, the economy is growing at an incred-iblepace –andwithitmiddleclassconsumersandtheirpurchasing power. Competition for raw materials and re-sources is intensifying. Energy shortage and water short-ages are two major consequences. In addition, outdated power infrastructures, growing water pollution and highly inefficientusagepatternsaggravatethesituation.ThatiswhyWilofocusesondevelopingbothflexible,high- efficiencysolutionsthatadapttotheirenvironmentandhighlyefficienttechnologiesthatconserveresources.Ourdevelopment activities consider the entire process from energyproductionorwaterpurificationtotransportationandconsumption.Ourinnovativeproductsletyousatisfyrequirementsforhighsystemefficiencyandthesustaina-ble use of precious resources.

Ultimately,theefficientuseofenergyandwaterisbecom-ing more and more important everywhere you look. This is especially true since urbanisation continues as a steady trend and worldwide the number of megacities with more than ten million inhabitants continues to grow. In these increasingly dense urban centres, supplying clean water to private households as well as industry and agriculture has been a major challenge for some time. How can the demand for fresh water be reduced? And how can water purificationbemadeasefficientaspossibleintermsofcapacity and energy consumption?

Megatrend –it’sacommonbuzzword.Butwhatexactlydoes it mean? Megatrends change the world. Lasting and profound in their effect, they are often closely related and reciprocallylinkedintheirdevelopment.Theinfluenceofmegatrends extends throughout all areas of our lives: from society, economy and politics to science, technology and culture.Wiloidentifiedsixmegatrendsthatareespeciallyimportant to you as our customers and therefore to us in our work:

ƒ Globalisation ƒ Energy shortage ƒ Water shortage ƒ Urbanisation ƒ Climate change ƒ Digital transformation

We engage intensely with these six trends to study their effects and develop solutions that make the future a better place and enhance the quality of life.

Onecross-cuttingmegatrendthathasbroughtmanymorechanges is globalisation. We all feel its effects, most of all at the workplace. The worldwide availability of products, information, services, raw materials, technologies and pro-cedures has heightened competition. Wilo develops solu-tions that give you an edge in regional and local markets. And in turnkey quality, since our distributed production network enables short delivery routes for our customers around the world.

6 Wilo –Technologyofthefuture

7

INNOVATIONS FOR A BRAND-NEW WORLD.

Thesequestionsareonyourmind –andours.Withourefficientproductsforwatersupply,wastewaterandsewagedisposal, we offer you great potential to conserve water resources while lowering costs.

Urbanisation is also a trend with close links to climate change. Rising temperatures, more frequent extreme weather events, along with air and water pollution, above allincities,increasethedemandforeffectivefiltrationandpumpsystemsthatalsoensureefficientenergyuse.

Solutions to many of these problems can be found in digital transformation. Extensive networking of supply and disposal systems and the intelligent distribution of water and energy are key to greater sustainability. Wilo is working to improve the integration of information and communicationtechnologiesandtoenablerapid,efficientdataanalysis.Ourproductsandsystemsfeaturemaximumconnectivity –makingthemincreasinglycost-efficient,intelligent, durable and simple. So they can easily live up to the demands of tomorrow.

Wilo

– T

echn

olog

y of

the

futu

re

DISCOVER WILO SOLUTIONS.

We offer a wide variety of intelligent pumps and systems to make our users’ everyday lives simplymorepleasant.Ourenergy-efficientsolutionsaresuitableforresidential,publicand commercial properties. Wilo products are used in heating, air conditioning, cooling and water supply applications as well as for drainage and sewage.

Click “Play”, learn more about our system solutions and which advantages Wilo products have for you.

3 DRAINAGE AND SEWAGE Wilo pumps and lifting units ensure safe and reliable operation in wastewater and sewage disposal.

2 WATER SUPPLY Innovative products and systems from Wilo support applications in rainwater utilisation, water supply and pressureboosting,firefightingandrawwaterintake.

1 HEATING, AIR CONDITIONING, COOLING Wilodeliversindividualsolutionsandhighlyefficient technology for applications in heating, air conditioning, cooling and domestic hot water.

DISCOVER WILO SOLUTIONS.

Wilo

– T

echn

olog

y of

the

futu

re

https://goo.gl/jZwXAM

Heating, air conditioning, cooling10

PUMPS AND SYSTEMS FOR HEATING, AIR CONDITIONING, COOLING AND DOMESTIC HOT WATER.

NETWORKED SOLUTIONS FOR AN OPTIMAL INDOOR CLIMATE.

Photo: DFM/Hannappel. Courtesy of DFB-Stiftung Deutsches Fußballmuseum gGmbH.

11

EFFICIENT AIR CONDITIONINGLarge buildings that house a variety of applications require highly sophisticated technology and intelligent network-ing. The German Football Museum in Dortmund is a prime example. In addition to the exhibition areas, the building contains a multifunctional arena, several dining areas and a separate floor for events, together extending over 7,700 squaremetres.Theimposingglassfrontoftenservesas a canvas for multimedia images and therefore must remainfreeofcondensation.Optimalairconditioningisprovidedby21 highlyefficientcirculators,fullycontrolledby the building management system. These Wilo pumps ensure resource-efficient operation while maximising potential savings.

VERSATILEOursolutionsmakeitpossibletosupplyvarioustypesofbuildings with a pleasant indoor climate and domestic hot water. From single-family houses to rental, administrative and commercial properties such as hospitals, office spaces or hotels.

Digital transformation is at the core of the megatrends that are fundamentally changing our lives. It makes it possible to interlink products to create powerful, efficient systems. Advanced sensors and analytics evaluate the collected data on the spot and implement appropriate modifications. Pumps are one component of these intelligent infrastructures: they play an important part in energy and drinking water management. For all types of buildings, from single-family houses to large industrial parks. Wilo pumps are highly efficient, individually adaptable and easy to integrate into building automa-tion systems. Communication with surrounding systems and adjusting to dynamic requirements for smart infrastructures will be key challenges in the future.

NETWORKED SOLUTIONS FOR AN OPTIMAL INDOOR CLIMATE.

Please click “Play” and discover Wilo-Stratos MAXO, our smart-pump.

Heat

ing,

air

cond

ition

ing,

coo

ling

https://goo.gl/e8ttqw

Volume flow Q max.

Product range

Series

Field of application

Design

Application

Delivery head H max.

Technical data

Equipment/function

Special features

Duty chart

Glandless premium high-efficiency pumps

Wilo-StratosPICO

Heating, air conditioning, cooling

15, 25, 30/1-4

42 310 Q/m³/h

1

2

3

4

5

6

0

H/m Wilo-Stratos PICO

15, 25, 30/1-6

Glandless circulation pump with screwed connection, EC motor and automatic power adjustment

Hot-water heating systems of all kinds, air-conditioning applications, industrial circulation systems

4 m3/h

6 m

ƒ Fluidtemperature+2 °Cto+110 °C ƒ Mainsconnection1~230V,50 Hz ƒ EnergyEfficiencyIndex(EEI)≤0.20 ƒ ScrewedconnectionRp ½,Rp1,Rp1¼ ƒ Max. operating pressure 10 bar

ƒ Controlmode:Δp-candΔp-v(Dy-namic Adapt)

ƒ Automatic setback operation ƒ Automatic venting routine ƒ Automatic restart and dry running detection

ƒ Display of the current power con-sumptionorflowandcumulativekWh

ƒ Reset function for the electricity meter or to factory settings

ƒ Hold function (Key lock) ƒ Wilo-Connector ƒ Options:stainlesssteelpumphousing;port-to-portlength130 mm

ƒ Maximumenergyefficiencythanksto the combination of the EC motor, Dynamic Adapt and precise settings

ƒ High reliability through self-protecting automatic routines

ƒ Intuitive setting/maintenance by activating functions and modes shown on LC display

ƒ Monitoring of current power con-sumptionorflowandcumulatedkWh

ƒ Tool-free electrical connection using the Wilo-Connector

Glandless standard high-efficiency pumps

Wilo-YonosPICO


0 1 2 3 4 Q/m³/h0

1

2

3

4

5

6

7H/m

25, 30/1-8

Wilo-Yonos PICO

15, 25, 30/1-4

15, 25, 30 /1-6



4.5 m3/h

8 m

ƒ Fluidtemperature-10 °Cto+95 °C ƒ Mainsconnection1~230V,50 Hz ƒ EnergyEfficiencyIndex(EEI)≤0.20 ƒ ScrewedconnectionRp ½,Rp1,Rp1¼ ƒ Max. operating pressure 10 bar

ƒ Controlmode:Δp-c,Δp-vandcon-stant speed (3 curves)

ƒ Setting the operating mode by appli-cation

ƒ Setting of delivery head or constant speed

ƒ Automatic deblocking function ƒ Manual re-start and venting function ƒ LED display for setting the setpoint and displaying actual consumption

ƒ Wilo-Connector ƒ Options:port-to-portlength130 mm

ƒ Maximum set-up comfort with new smart settings, self-explanatory inter-face and new functions

ƒ OptimisedenergyefficiencythankstoEC motor technology, precise settings by 0.1 m

ƒ Quick installation/replacement thanks to the improved compact design

ƒ Easier maintenance due to automati-cally and manually activated restart or air venting function

ƒ Maximum reliability and operational safety thanks to proven technology


Wilo-YonosPICO-D


Wilo-Yonos PICO-D

Yonos PICO-D

5420 31 Q/m³/h01

345678

2

H/m



7 m3/h

8 m

ƒ Fluidtemperature-10 °Cto+95 °C ƒ Mainsconnection1~230V,50 Hz ƒ EnergyEfficiencyIndex(EEI)≤0.20 ƒ ScrewedconnectionRp1¼ ƒ Max. operating pressure 6 bar

ƒ Controlmode:Δp-candΔp-v ƒ Setting of delivery head ƒ Automatic venting function ƒ Automatic deblocking function ƒ Main/standby mode and parallel operation

ƒ LED display for setting the setpoint and displaying actual consumption

ƒ Wilo-Connector

ƒ LED display for setting the setpoint in 0.1 m steps and for showing the current consumption

ƒ Tool-free electrical connection using the Wilo-Connector

ƒ Unique pump venting function per pump

ƒ Doublepumpforindividual(Δp-candΔp-v)orparalleloperation(Δp-c)

ƒ Very high starting torque for safe start-up

General Overview – Edition 2018 – 50 Hz – Subject to change without prior notice.

Heating, air-conditioning, cooling12 13

Heat

ing,

air

cond

ition

ing,

coo

ling

Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart


Wilo-VariosPICO


Wilo-Varios PICO

0 1 2 3 Q/m³/h

Varios PICO 15,25/1-7

01234567

H/m



3.5 m3/h

7 m

ƒ Fluidtemperature-10 °Cbis+95 °C ƒ Mainsconnection:1~230V,50 Hz ƒ EnergyEfficiencyIndex(EEI)≤0,20 ƒ ScrewedconnectionRp ½,Rp1 ƒ Max. operating pressure 10 bar

ƒ Controlmode:Δp-c,Δp-vandcon-stant speed

ƒ External control (PWM and iPWM) ƒ Sync function (manual manual pro-gramming mode)

ƒ Air venting function ƒ Manual re-start ƒ LED display and 2 push buttons for settings and functions activation

ƒ Dual electrical connection (Molex and Wilo-Connector)

ƒ Front access to motor screws

ƒ A highly compatible replacement solution for all applications thanks to compact dimensions, new control modes e.g. iPWM and the new Sync function

ƒ Highest comfort in handling with one push button for control mode and one for preset curves and the LED-display

ƒ Easy installation through adaptable connections and maintenance func-tions like air venting

ƒ Highest reliability and operational safety thanks to proven technology


Wilo-YonosECO...-BMS


Wilo-Yonos ECO BMS

0

1

2

3

4

5H/m

0 1,00,5 1,5 2,52,0 Q/m³/h

Yonos ECO 25, 30/1-5 BMS


Hot-water heating systems of all kinds, air-conditioning systems, closed cooling circuits, industrial circulation systems

3 m³/h

5 m

ƒ Fluidtemperature-10 °Cto+110 °C ƒ Mainsconnection:1~230V,50 Hz ƒ EnergyEfficiencyIndex(EEI)≤0.20 ƒ ScrewedconnectionRp1,Rp1¼ ƒ Max. operating pressure 10 bar

ƒ Controlmodes:Δp-c,Δp-vandmanu-al control mode (n = constant)

ƒ Control input “Analog In 0 - 10 V” (remote speed control)

ƒ Collective fault signal (potential-free NC contact)

ƒ Control cable (4-core, 1.5 m) for con-necting SSM and 0-10 V

ƒ Wilo-Connector ƒ Deblocking function

ƒ Potential-free collective fault signal (SSM) for connection to external moni-toring unit (e.g. building automation) andcontrolinput0-10 V

ƒ Control cable (4-core, 1.5 m) for connecting SSM and 0-10 V

ƒ Wilo-Connector ƒ Thermal insulation as standard ƒ Pump housing with cataphoretic coating protects against corrosion due to condensation formation

Glandless premium smart pumps

Wilo-StratosMAXOWilo-StratosMAXO-D


Wilo-Stratos MAXOWilo-Stratos MAXO-D

Stratos MAXO Stratos MAXO-D

8040 10060200 Q/m³/h0

468

2

10121416

H/m

Smart glandless circulator with screwed connectionorflangeconnection,ECmo-tor with integrated power adjustment


120 m3/h

16 m

ƒ Fluidtemperature-10 °Cto+110 °C ƒ Mainsconnection:1~230 V,50 Hz ƒ NominaldiameterRp 1toDN 100 ƒ Max.operatingpressure10 bar(specialversion:16 bar)

ƒ Control mode: Dynamic Adapt plus, ∆p-c,∆p-v,n-const,T-const,∆T-constandQ-const

ƒ Automatic switch-off the pump with No-Flow Stop

ƒ Multi-Flow Adaptation ƒ Remote control via Bluetooth interface ƒ Selection of application range with Setup Guide

ƒ Heat and cold metering ƒ Dual pump management ƒ Retrofitableinterfacemodulesforcommunication

ƒ Intuitive operation by guided applica-tion settings with the Setup Guide

ƒ Optimisedenergy-savingfunctionssuch as No-Flow Stop

ƒ Innovative and intelligent controlling functions such as Dynamic Adapt plus and Multi-Flow Adaption

ƒ Bluetooth interface for connection to mobile devices and direct pump networking for multiple pump control via Wilo Net

ƒ Maximum electric installation comfort by the optimised Wilo-Connector



Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart


Wilo-StratosWilo-Stratos-D


9080604020 705030100 Q/m³/h02

68

10121416

4

H/m Wilo-StratosWilo-Stratos-D

Stratos-DStratos

Glandless circulator with screwed con-nectionorflangeconnection,ECmotorand automatic power adjustment


109m3/h

17 m

ƒ Fluidtemperature-10 °Cto+110 °C ƒ Mainsconnection1~230 V,50 Hz ƒ EnergyEfficiencyIndex(EEI)≤0.20(EEI≤0.23fordoublepumps)

ƒ NominaldiameterRp 1toDN 100 ƒ Max.operatingpressure10 bar(specialversion:16 bar)

ƒ Controlmodes:∆p-c,∆p-v,∆p-T ƒ VolumeflowlimitationwithQ-Limitfunction (via IR-Stick)

ƒ Automatic setback operation ƒ Dual pump management ƒ Graphical pump display ƒ Remote control via infrared interface (IR-Stick/IR-Monitor)

ƒ Retrofitableinterfacemodulesforcommunication

ƒ CombinationflangesPN6/PN10(DN 32toDN 65)

ƒ Energy savings through greater system efficiencywiththeQ-Limitfunction

ƒ ImprovedEnergyEfficiencyIndex(EEI)≤0.20forallsinglepumps.

ƒ Optimiseddisplayforbetterreadability ƒ Space-saving installation due to com-pact design and location-dependent LC display

ƒ Retrofitableinterfacemodulesforcommunication (e.g. Modbus, BACnet, CAN,LONandPLR)

ƒ Tried and tested quality and reliability


Wilo-YonosMAXOWilo-YonosMAXO-D


242016 363228 484440124 80 Q/m³/h02

68

10121416

4

H/m

Yonos MAXO-D

Yonos MAXO

Wilo-Yonos MAXO,Wilo-Yonos MAXO-D

Glandless circulator with screwed con-nectionorflangeconnection,ECmotorand automatic power adjustment


55 m3/h

16 m

ƒ Fluidtemperature-20 °Cto+110 °C ƒ Mainsconnection1~230V,50 Hz ƒ EnergyEfficiencyIndex(EEI)≤0.20(EEI≤0.23fordoublepumps)

ƒ NominaldiameterRp 1toDN 100 ƒ Max. operating pressure 10 bar

ƒ Controlmodes:Δp-c,Δp-v,3speedstages

ƒ LED display for setting the required delivery head

ƒ Quick electrical connection with Wilo plug

ƒ Motor protection, fault signal light and contact for collective fault signal

ƒ CombinationflangesPN6/PN10(forDN 40toDN 65)

ƒ LED display for indication of set deliv-ery head and fault codes

ƒ Quick setting when replacing an un-controlled standard pump with pre-set speedstages,e.g.TOP-S

ƒ Electrical connection with Wilo plug ƒ Collective fault signal ensures system availability

ƒ Pump housing with cataphoretic (KTL) coating protects against corrosion due to condensation

Glanded high-efficiency pumps in in-line design

Wilo-Stratos GIGAWilo-Stratos GIGA-D

Heating, air conditioning, cooling, indus-trial process

100 150 20050 250 3000 Q/m³/h0

H/m

2010

4030

506070

Wilo-Stratos GIGA

High-efficiencyin-linepump(assingleordouble pump) with EC motor, electron-ically controlled, in glanded design with flangeconnectionandmechanicalseal

Pumping of heating water, cold water and water-glycol mixtures without abrasive substances in heating, cold water and cooling systems

375 m3/h

65 m

ƒ Fluidtemperature-20°Cto+140°C ƒ Mainsconnection:3~380V-3~480 V(±10 %),50/60 Hz

ƒ Minimumefficiencyindex(MEI)≥0.7 ƒ Nominal diameter DN 40 up to DN 100 ƒ Max. operating pressure 16 bar

ƒ Controlmodes:Δp-c,Δp-v,PIDcon-trol, n=constant

ƒ Manual functions: E.g. differential pressure setpoint setting, manual con-trol mode, error acknowledgement

ƒ External control functions: E.g OverridingOff,externalpumpcycling(double pump operation), analogue input 0-10 V/0-20 mA for constant speed (DDC)

ƒ Remote control via infrared interface (IR-Stick/IR-Monitor), plug-in position for IF-Modules for connection to building automation

ƒ Safety functions

ƒ Innovativehigh-efficiencypumpformaximumoverallefficiency

ƒ High-efficiencyECmotorwitheffi-ciency class IE5 acc. IEC 60034-30-2

ƒ OptionalIF-moduleinterfacesforbus communication with building automation

IE

Series extension



Heat

ing,

air

cond

ition

ing,

coo

ling

Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart

Glanded high-efficiency pumps in mon-obloc design

Wilo-Stratos GIGA B


0

10

20

30

40

H/m

20 40 60 8010 30 50 70 900 Q/m³/h

Wilo-Stratos GIGA B

High-efficiencymonoblocpumpwithECmotor and electronic power adjustment inglandedpumpdesign,withflangeconnection and mechanical seal


120 m3/h

44 m

ƒ Fluidtemperature-20 °Cto+140 °C ƒ Mainsconnection:3~380V-3~480 V(±10%),50/60 Hz

ƒ Minimumefficiencyindex(MEI)≥0.7 ƒ Nominal diameter DN 32 to DN 80 ƒ Max. operating pressure 16 bar



ƒ External control functions: E.g. OverridingOff,Externalpumpcycling,analogue input 0-10 V/0-20 mA for constant speed (DDC)


ƒ Safety functions

ƒ Innovativehigh-efficiencypumpformaximumtotal-systemefficiency,with principal dimensions in accord-ance with EN 733

ƒ High-efficiencyECmotor(efficiencyclass IE5 acc. IEC 60034-30-2)

ƒ OptionalIF-moduleinterfacesforbus communication with building automation

IE

Glanded energy-saving pumps in in-line design

Wilo-VeroLine-IP-EWilo-VeroTwin-DP-E


60 8020 40 100 120 1400 Q/m³/h0

H/m

5

10

20

15

25Wilo-VeroLine-IP-EWilo-VeroTwin-DP-E

VeroLine-IP-EVeroTwin-DP-E

Energy-saving in-line pump/in-line double pump in glanded construction. Version as single-stage low-pressure centrifugalpumpwithflangeconnectionand mechanical seal

Pumping of heating water, cold water and water-glycol mixtures without abrasivesubstances in heating, cold water andcooling systems

170 m3/h

30 m

ƒ Fluidtemperature-20 °Cto+120 °C ƒ Mains connection: 3~440 V ±10 %,50/60 Hz3~400V±10 %,50/60 Hz3~380V-5 %/+10 %,50/60 Hz

ƒ Minimumefficiencyindex(MEI)≥0.4 ƒ NominaldiameterDN 32toDN 80 ƒ Max. operating pressure 10 (16) bar



ƒ Externalcontrolfunctions:E.g.Over-ridingOff,externalpumpcycling(ef-fective only in double pump operation mode), analogue input 0-10 V/ 0-20 mA for constant speed (DDC)


ƒ Safety functions

ƒ Energy savings due to integrated electronic control

ƒ Optionalinterfacesforbuscommuni-cation using plug-in IF-Modules

ƒ Simple operation with green button technology and display

ƒ Integrated dual pump management ƒ Integrated full motor protection with trip electronics

ƒ MotorswithefficiencyclassIE4

Glanded energy-saving pumps in in-line design

Wilo-CronoLine-IL-EWilo-CronoTwin-DL-E


600200 400 500100 3000 Q/m³/h0

H/m

10

20

30

40

50

60Wilo-CronoLine-IL-EWilo-CronoTwin-DL-E

CronoLine-IL-E

CronoTwin-DL-E

Energy-saving in-line pump/in-line double pump in glanded construction. Version as single-stage low-pressure centrifugalpumpwithflangeconnectionand mechanical seal


800 m3/h

65 m

ƒ Fluidtemperature-20 °Cto+140 °C ƒ Mains connection: 3~440 V ±10 %,50/60 Hz3~400V±10 %,50/60 Hz3~380V-5 %/+10 %,50/60 Hz

ƒ Minimumefficiencyindex(MEI)≥0.4 ƒ NominaldiameterDN 40toDN 80 ƒ Max. operating pressure 16 bar



ƒ Externalcontrolfunctions:E.g.Over-ridingOff,externalpumpcycling(ef-fective only in double pump operation mode), analogue input 0-10 V/ 0-20 mA for constant speed (DDC)


ƒ Safety functions



ƒ Simple operation with green button technology and display

ƒ Integrated dual pump management ƒ Integrated full motor protection with trip electronics


Series modification



Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart

Glanded energy-saving pumps in mon-obloc design

Wilo-CronoBloc-BL-E


250200 300100 150500 Q/m³/h0

H/m

20

40

60

80

10

30

50

70

Wilo-CronoBloc-BL-E

Energy-saving pump in monobloc design in glanded construction. Version as sin-gle-stage low-pressure centrifugal pump withflangeconnectionandmechanicalseal


380 m3/h

84 m

ƒ Fluidtemperature-20 °Cto+140 °C ƒ Mains connection:3~440 V ±10 %,50/60 Hz3~400V±10 %,50/60 Hz3~380V-5 %/+10 %,50/60 Hz

ƒ Minimumefficiencyindex(MEI)≥0.4 ƒ NominaldiameterDN 32toDN 125 ƒ Max. operating pressure 16 bar



ƒ Externalcontrolfunctions:E.g.Over-ridingOff,analogueinput0-10V/0-20mA for constant speed (DDC)


ƒ Safety functions



ƒ Easy operation due to tried and tested green button technology and display

ƒ Integrated full motor protection with trip electronics

ƒ Meets user requirements due to performance and main dimensions in accordance with EN 733


Glanded standard pumps in in-line design

Wilo-VeroLine-IPLWilo-VeroTwin-DPL


50 100 150 2000 Q/m³/h0

H/m

20

10

40

30

50Wilo-VeroLine-IPLWilo-VeroTwin-DPL

VeroLine-IPL

VeroTwin-DPL

Glanded pump/double pump in in-line designwithscrewedconnectionorflangeconnection


245 m3/h

52 m

ƒ Fluidtemperature-20 °Cto+120 °C ƒ Mainsconnection3~400 V,50 Hz ƒ Minimumefficiencyindex(MEI)≥0.4 ƒ NominaldiameterRp 1toDN 100 ƒ Max.operatingpressure10 bar(specialversion:16 bar)

ƒ Single-stage, low-pressure centrifugal pump in in-line design with

ƒ Mechanical seal ƒ Flange connection with pressure measuringconnectionR ⅛

ƒ Motor with one-piece shaft ƒ DPL with switchover valve ƒ MotorswithefficiencyclassIE3formotors≥0.75kW

ƒ High standard of corrosion protection thanks to cataphoretic coating

ƒ Standard condensate drainage holes in the motor housings and lanterns

ƒ Series design: motor with one-piece shaft

ƒ Version N: Standard motor B5 or V1 with stainless steel plug shaft

ƒ Bidirectional,force-flushed mechanical seal

ƒ DPL: Main-/standby operation or peak-load operation (via additional external device)

Glanded standard pumps in in-line design

Wilo-CronoLine-ILWilo-CronoTwin-DL


800600 1000200 4000 Q/m³/h0

H/m

20

40

60

80

100Wilo-CronoLine-ILWilo-CronoTwin-DL

CronoLine-IL

CronoTwin-DL

Glanded pump/double pump in in-line designwithflangeconnection


1,170 m3/h

108 m

ƒ Fluidtemperature-20 °Cto+140 °C ƒ Mainsconnection3~400 V,50 Hz ƒ Minimumefficiencyindex(MEI)≥0.4 ƒ NominaldiameterDN 32toDN 250 ƒ Max.operatingpressure16 bar(25 baron request)



ƒ Lantern ƒ Coupling ƒ IEC standardmotor ƒ DL with switchover valve ƒ MotorswithefficiencyclassIE3formotors≥0.75kW

ƒ Reduced life cycle costs thanks to optimisedefficiency

ƒ Canbeusedflexiblyinair-condition-ing and cooling systems, with applica-tionbenefitsduetodirectdrainingofcondensate

ƒ High standard of corrosion protection ƒ Worldwide availability of standard mo-tors(accordingtoWilospecifications)and standard mechanical seals

ƒ Main/standby mode or peak-load op-eration (by means of external auxiliary device)

Series modification



Heat

ing,

air

cond

ition

ing,

coo

ling

Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart

Special glanded pumps in in-line design

Wilo-VeroLine-IPH-WWilo-VeroLine-IPH-O


5040 6020 30100 Q/m³/h0

H/m

20

105

3025

15

35Wilo-VeroLine-IPH-O/-W

Glanded pump in in-line design with flangeconnection

IPH-W: For hot water in closed industrial circulation systems, district heating, closed heating systemsIPH-O:Forheattransferoilinclosedindustrial circulation systems

80 m3/h

38 m

ƒ FluidtemperatureIPH-W:-10 °Cto+210 °C(atmax.23bar)

ƒ FluidtemperatureIPH-O:-10 °Cto+350 °C(atmax.9bar)

ƒ Mainsconnection3~400 V,50 Hz ƒ NominaldiameterDN 20toDN 80


ƒ Mechanical seal ƒ Flange connection ƒ Lantern ƒ Motor with special shaft

ƒ Self-cooled mechanical seal, inde-pendent of direction of rotation

ƒ Great variety of applications due to a widefluidtemperaturerangewithoutadditional wearing parts

Glanded monobloc pumps

Wilo-CronoBloc-BL


0

H/m

2030

10

405060

8090

70

100

600200 4000 Q/m³/h

Wilo-CronoBloc-BL

Glanded pump in monobloc design with flangeconnection


710 m3/h

104 m

ƒ Fluidtemperature-20 °Cto+140 °C ƒ Mainsconnection3~400 V,50 Hz ƒ Minimumefficiencyindex(MEI)≥0.4 ƒ NominaldiameterDN 32toDN 150 ƒ Max.operatingpressure16 bar(25 baron request)

ƒ Single-stage low-pressure centrifugal pump in monobloc design, with axial suction port and radially arranged pressure port with


ƒ Lantern ƒ Coupling ƒ MotorswithefficiencyclassIE3formotors≥0.75kW

ƒ Reduced life cycle costs through opti-misedefficiencylevels

ƒ High corrosion protection through cataphoresis coating of the cast iron components

ƒ Standard condensate drainage holes in the motor housings

ƒ High worldwide availability of standard motors(accordingtoWilospecifica-tions) and mechanical seals

ƒ Performance and main dimensions in accordance with EN 733

Glanded monobloc pumps

Wilo-BAC


40 6020 50 7030100 Q/m³/h0

5

10

25

20

15

H/m Wilo-BAC

Glanded pump in monobloc design with screwed connection or Victaulic connection

For pumping of cooling water, cold water, water-glycolmixturesandotherfluidswithout abrasive substances

87 m3/h

26 m

ƒ Fluidtemperature-15 °Cto+60 °C ƒ Mainsconnection3~400 V,50 Hz ƒ Minimumefficiencyindex(MEI)≥0.4 ƒ NominaldiameterG2/G1½(onlyBAC 40…/S) or Victaulic connec-tion∅ 60.3/48.3 mm(BAC40…/R)∅ 76.1/76.1 mm(BAC70…/R)

ƒ Max.operatingpressure6.5 bar

ƒ Single-stage low-pressure centrifugal pump in monobloc design, with axial suction port and radially arranged pressure port


ƒ Reduced life cycle costs through opti-misedefficiencylevels

ƒ Pump housing in plastic design ƒ Version with Victaulic or threaded connection (BAC 70/135... only with Victaulic connection)



Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart

Standard glanded pumps

Wilo-CronoNorm-NL

Heating, air conditioning, cooling, water supply, industrial process

200 300 400100 5000 Q/m³/h0

H/m

20406080

140120100

Wilo-CronoNorm-NL

Single-stage low-pressure centrifugal pump with axial suction, according to EN 733andISO 5199,mountedonabaseplate

Pumping of heating water, cold water and water-glycol mixtures without abrasive substances. Applications in municipal water supply, irrigation, general industry, power stations etc.

650 m3/h

150 m

ƒ Fluidtemperature-20 °Cto+120 °C ƒ Mainsconnection3~400V,50 Hz ƒ Minimumefficiencyindex(MEI)≥0.4 ƒ Nominaldiameter:DN 50toDN 500(suctionside),DN 32toDN 500(pressure side)

ƒ Operatingpressure:dependingontypeandapplication–upto16bar

ƒ Single-stagehorizontalspiralhousingpump with bearing bracket and exchangeable casing wear rings in process design

ƒ Shaft sealing with mechanical seals in accordancewithEN 12756orpackingstuffingbox

ƒ Spiral housing with cast pump bases ƒ Shaft coupling with spacer coupling ƒ MotorswithefficiencyclassIE3formotors≥0.75kW

ƒ Reduced life-cycle costs through optimisedefficiencylevels

ƒ Bidirectional,force-flushedmechan-ical seal

ƒ Low NPSH values, best cavitation properties

ƒ Shaft coupling with or without spacer coupling


Wilo-CronoNorm-NLGWilo-VeroNorm-NPG


200015005000 Q/m³/h0

H/m

20406080

140120100

1000

Wilo-VeroNorm-NPGWilo-CronoNorm-NLG

NPGNLG

Single-stage low-pressure centrifugal pump with axial suction, according to ISO 5199,mountedonabaseplate


2,800 m3/h

140 m

ƒ Fluidtemperature-20 °Cto+120 °C(depending on type)

ƒ Mainsconnection3~400V,50 Hz ƒ Minimumefficiencyindex(MEI)≥0.4 ƒ Nominaldiameters:DN 150toDN 500(depending on type)


ƒ Single-stagehorizontalspiralhousingpump with bearing bracket and exchangeable casing wear rings (NLG only) in process design

ƒ Shaft sealing with mechanical seals in accordancewithEN 12756orpackingstuffingbox

ƒ Spiral housing with cast pump bases ƒ Greased grooved ball bearings for bearing of pump shaft


ƒ NLG: - Reduced life cycle costs through optimisedefficiency

- Mechanical seal independent of the direction of rotation

- Interchangeable casing wear ring - Permanently lubricated, generously dimensioned roller bearings

ƒ NPG: ƒ Suitablefortemperaturesupto140 °C ƒ Back pull-out version

Axially split case pumps

Wilo-SCP

Cooling, air conditioning, water distribu-tion/boosting, industrial process

1000100 5005010 Q/m³/h4

H/m

10

50

100

200Wilo-SCP

Low-pressure centrifugal pump with axi-ally split housing mounted on a baseplate

Pumping heating water, water-glycol mixtures, cooling/cold water and process waterApplications in municipal water supply, irrigation, building services, general industry, power stations, etc.3,400 m3/h

245 m

ƒ Fluidtemperature-8 °Cto+120 °C ƒ Mainsconnection3~400V,50 Hz ƒ Nominal diameters - Suction side: DN 65 to DN 500

ƒ Pressure side: DN 50 to DN 400 ƒ Max.operatingpressure:16or25 bar,depending on type

ƒ 1- or 2-stage, low-pressure centrifu-gal pump in monobloc design

ƒ Deliverable as complete unit or with-out motor or only pump hydraulics

ƒ Shaft sealing with mechanical seal or stuffingboxpacking

ƒ 4-pole and 6-pole motors ƒ Materials: ƒ Pump housing: EN-GJL-250 ƒ Impeller: G-CuSn5 ZnPb ƒ Shaft: X12Cr13

ƒ Highercapacitiesupto17,000 m3/h on request

ƒ Special motors and other materials on request



Heat

ing,

air

cond

ition

ing,

coo

ling

Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart

Glanded energy-saving pumpsMulti-pump systems

Wilo-SiFlux


SiFlux 21 SiFlux 31

2001000 150 350400250 30050 Q/m³/h0

10

30

40

50

20

H/m Wilo-SiFlux50 Hz

Highlyefficient,fullyautomatic,readyforconnection multi-pump system for high volumeflowsinheating,coldwaterandcooling water systems. 3 to 4 electron-ically controlled glanded in-line pumps switched in parallelFor pumping heating water, water-gly-col mixtures and cooling and cold water without abrasive substances in heating, cold water and cooling water systems

490m3/h

55 m

ƒ Pump type: VeroLine-IP-E or Crono-Line-IL-E

ƒ 3~230/400V,50 Hz±10 % ƒ Fluidtemperature:0 °Cto+120 °C ƒ Pipe connections: DN 125 to DN 300 ƒ Flanges:PN16,accordingEN1092-2 ƒ Max. permissible operating pressure: 10 bar (IP-E), 16 bar (IL-E)

ƒ Automatic pump control via Wilo-SCe ƒ Parts that come in contact with the fluidarecorrosion-resistant

ƒ Base frame made of galvanised steel, with height-adjustable vibration absorbers for insulation against struc-ture-borne noise

ƒ Distributor steel, with corrosion- resistant coating

ƒ Shut-off valves, non-return valve, pressure gauge and premounted seals

ƒ Differential pressure sensor

ƒ Number of pumps: 2+1 or 3+1 (2 or 3 pumps in operation, 1 standby pump each)

ƒ Quick and easy installation ƒ Energy-saving:Operationinpartialload area according to current needs

ƒ Reliable system thanks to optimally matched components

ƒ Compact design, good accessibility to all components

Condensate lifting units

Wilo-Plavis …-C


Wilo-Plavis 011-C, 013-C, 015-C

0

H/m

2

1

4

5

3

100 150 20050 250 3000 Q/l/hAutomatic condensate lifting unit

For pumping condensate out ofHeat generators with condensing boiler technology, Air-conditioning and cooling systems (such as refrigerators, refrigerat-ed display cases and evaporators)

330 l/h

4 m

ƒ Mains connection 1 ~ 100-240 V, 50/60 Hz

ƒ Max.fluidtemperature60 °C ƒ ProtectionclassIP X4 ƒ Inletconnections18/40 mm ƒ Tank volume 0.7 l to 1.6

ƒ Electric connecting cable with plug (1.5 m,versionsavailablewithUKplug)

ƒ 011-Cand013-C:Pressurehose(5 m,Ø 8);Alarmcable(1.5m);Adjustablerubberguide,Ø 2toØ 32;Detachableslide valve for maintenance

ƒ 015-C: Granulated chamber wall for neutralisation

ƒ Low-noiseoperation(≤40 dB[A]) ƒ Energy saving through low power consumption

ƒ Easy installation thanks to adaptable inlet

ƒ Quick and easy maintenance thanks to removable service cap and integrated non-return valve

Particle separator systems for closed HVAC loops

Wilo-SiClean


Compact particle separator kit, consisting of mechanical and hydraulic components. Manual emptying of the system

Removes magnetic and non-magnetic particles from heating systems via nat-ural physical phenomena in commercial properties and for district heating

4 m3/h

–

ƒ Fluidtemperature0 °Cto+95 °C ƒ Mainsconnection:1~230V,50 Hz

ƒ Anti-corrosive, hydraulic components ƒ Fabric-reinforced hoses connected to inlet and outlet of the particle separator

ƒ Pre-assembled venting unit for expul-sion of microbubbles

ƒ Movable magnetic rods for separation of iron oxide particles

ƒ Volumeflowlimiter ƒ Manual purge valve for draining of collected particles

ƒ Switchbox for monitoring the circu-lator

ƒ Removal of magnetic and non-mag-netic particles from the medium, venting of micro bubbles

ƒ Highcleaningefficiencyduetophysi-caleffects(gravity,filtration…)

ƒ Easy to use due to ease of installation, maintenance,andsimplifiedsettings

ƒ Corrosion-resistant thanks to stainless steel particle separator

no illustration



Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart

Particle separator systems for closed HVAC loops

Wilo-SiClean Comfort


Fully-automatic, compact particle sep-arator, provided as “Plug & Play” version, consisting of mechanical and hydraulic components. The system is drained automatically

SiClean Comfort removes particles from heating systems using natural physical phenomena. For installation in commer-cial properties and heating/air-condi-tioning systems for district heating

47 m3/h

–

ƒ Fluidtemperature0 °Cto+95 °C ƒ Mainsconnection:3~400V,50 Hz

ƒ Corrosion-resistant, hydraulic com-ponents

ƒ Fabric-reinforced hoses connected to inlet and outlet of the particle separator

ƒ Pre-assembledflushingdeviceinclud-ing electronic drain valve and addition-al safety valve

ƒ Automatic draining of the particle collection chamber

ƒ SC switchgear ƒ Separator for removing magnetic and non-magnetic particles

ƒ Highefficiencyviacombinationofphysical effects

ƒ Fully automated operation ƒ “Plug & Play” design ƒ Fully automated and adjustable disposal of collected particles in the desludging tank

ƒ Highly functional thanks to removal of all magnetic and non-magnetic particles, free air and micro bubbles in thefluid,supportforthedegasifica-tion process

Control devices(Comfort controller CC..., Vario control-ler VR..., Smart controller SC...)

Wilo-CC/CC-FC/CCe-HVAC systemWilo-SC/SC-FC/SCe-HVAC systemWilo-VR-HVAC system


Switchgear for controlling 1 to 6 pumps

–

–

–

ƒ CC-HVAC: Control system for 1 to 6 pumpswithfixedspeed

ƒ CCe-HVAC: Control system for 1 to 6 pumps with integrated electronics/speed control or external frequency converter control

ƒ VR-HVAC: Controller for 1 to 4 pumps with integrated speed control

ƒ SC-HVAC: Controller for 1 to 4 pumps ƒ SC and SC-FC versions for standard pumpswithfixedspeed

ƒ SCeversionforinfinitelyvariable,elec-tronically controlled pumps or pumps with integrated frequency converter

ƒ Special versions on request

External Frequency Converter

Wilo-EFC

All water applications in Building Ser-vices, Water Management and Industry, especially: heating, air conditioning and pressure boosting, etc.

Stand-alone frequency converter

Wall-mounted frequency converter for fixed-speedpumpsequippedwithasyn-chronous or permanent magnet motors

–

–

ƒ Max.ambienttemperature:55°C(50°Cwithoutderating)upto90kW,50°C(45°Cwithoutderating)from110kW

ƒ Environment protection class: IP55 up to90kW,IP54from110kW

ƒ IF-modulesasanoption:Profibus,Ethernet,DeviceNet,Profinet,Modbus

ƒ Flexible and safe application ƒ Compact design with energy-saving cooling concept to reduce tempera-ture losses

ƒ Integratedenergy-efficientharmonicreduction

ƒ Additional energy-saving function in the partial load range of the pump

ƒ Versatile use in pump applications thanks to several connection options and different control modes

NEW

no illustration no illustration no illustration



Heat

ing,

air

cond

ition

ing,

coo

ling

Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart

Pump control

Wilo-IR-Stick, IR-MonitorWilo-IF-Module Stratos/Wilo-IF-Module


Wilo-Control products for connecting pumps to building automation

–

–

–

ƒ Wilo-IR-Stick/IR-Monitor ƒ Remote control with infrared interface for electronically controlled Wilo pumps

ƒ Wilo-IF-Modules Stratos/IF-Modules ƒ Plug-in modules for BA connection of Stratos, Stratos GIGA/-D/-B, IP-E, DP-E, IL-E/DL-E, BL-E, MHIE, MVIE, Helix VE...

–

Glandless high-efficiency pumps

Wilo-YonosPICO-STG

Solar thermal and geothermal energy

Wilo-Yonos PICO-STG

15/1-13

420 31 Q/m³/h0

2

68

10

12

4

H/m

15, 25, 30/1-7,5

Glandless circulator with screwed con-nection, EC motor and automatic power adjustment

Circulation in solar thermal and geother-mal energy systems

4.5 m³/h

13 m

ƒ Fluidtemperature0 °Cto+110 °C ƒ Mainsconnection1~230V,50 Hz ƒ EnergyEfficiencyIndex(EEI)≤0.23 ƒ ScrewedconnectionRp½,Rp1,Rp1¼ ƒ Max. operating pressure 10 bar

ƒ Controlmodes:Δp-v,manualcontrolmode (n = constant), external speed control with PWM 1 or PWM 2 signal

ƒ Interface for PWM 1 or PWM 2 signal ƒ Wilo-Connector ƒ Automatic deblocking function ƒ Pump housing with cataphoretic coating

ƒ Green button for setting the control modeΔp-vorthefixedspeed

ƒ External speed control via integrated interface PWM 1 (geothermal) and PWM 2 (solar)

ƒ Flexible connection cable with Wilo-Connector

ƒ Pump housing with cataphoretic coating protects against corrosion due to condensation formation

ƒ OperationandfaultdisplayviaringLED

Submersible pumps

Wilo-Sub TWU 4 ...-GT

Geothermal energy systems

0 21 43 5048

1216202428

Submersible pump, multistage

Water supply from boreholes, wells and rainwater storage for geothermal applications

6 m3/h

33 m

ƒ Mainsconnection:3~400 V,50 Hz ƒ Immersed operating mode: S1 ƒ Fluidtemperature:3-30 °C ƒ Minimumflowrateatmotor:0.08 m/s ƒ Max.sandcontent:50 g/m³ ƒ Up to 20 starts per hour ƒ Max.immersiondepth:200 m ƒ MinimumefficiencyindexMEI:≥0.7

ƒ Multistage submersible pump with radial or semi-axial impellers

ƒ Integrated non-return valve ƒ NEMA coupling ƒ Three-phase motor ƒ Hermetically sealed motors

ƒ Performance-optimised motors for geothermal applications

ƒ Partsincontactwiththefluidarecorrosion-resistant

ƒ Integrated non-return valve ƒ Lowwearduetofloatingimpellers

no illustration



Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart


Wilo-Star-ZNOVA

Domestic hot water

Q/m³/h

H/m

0 0,1 0,2 0,3 0,40

0,2

0,4

0,6

0,8

1,0

1,2Wilo-Star-Z NOVA

Glandless circulator with screwed connection and blocking-current proof synchronous motor

Domestic hot water circulation systems in industry and in building services

0.4 m3/h

1.1 m

ƒ Fluid temperature: drinking water uptowaterhardness3.56 mmol/l(20 °dH):max.+65 °C(NOVAT:+95 °C)

ƒ Mainsconnection1~230V,50 Hz ƒ ScrewedconnectionRp½ ƒ Max. operating pressure 10 bar

ƒ Wilo-Connector ƒ Ball shut-off valve on suction side and non-return valve on pressure side (Star-ZNOVAA,C,T)

ƒ Including plug-in time switch, 1.8 m connectioncable(Star-ZNOVAC)

ƒ Star-ZNOVATincl.timer,thermo-static valve and detection of thermal desinfection, LC display with symbolic language

ƒ Hygienically safe thanks to proven technology

ƒ Improvedenergyefficiencydueto synchronous motor with power consumption of only 3-6 watts and thermal insulation shell as standard

ƒ Quick, easy installation and re-placement of common pump types thankstoflexibleservicemotorandWilo-Connector


Wilo-StratosPICO-Z

Domestic hot water

Wilo-Stratos PICO-Z

0 1 2 3 Q/m³/h

6

5

4

3

2

1

0

H/m

20, 25/1-4

20, 25/1-6

Glandless circulator with screwed con-nection, EC motor and automatic power adjustment


3.5 m³/h

6 m

ƒ Fluid temperature: drinking water up to water hardness 3.57 mmol/l (20 °dH)max.+70 °C

ƒ Mainsconnection1~230V,50 Hz ƒ Screw connection Rp ¾, Rp 1 ƒ Max. operating pressure 10 bar

ƒ Controlmode:Δp-c,tempera-ture-controlled mode

ƒ Temperature control for constant return temperature in drinking water circulation systems

ƒ Thermal disinfection routine ƒ Reset function for resetting the elec-tricity counter or to factory settings

ƒ “Hold” function (key lock) ƒ Wilo-Connector ƒ Automatic deblocking function

ƒ Manual and temperature-controlled mode for optimum operation

ƒ Identificationofthethermaldisinfec-tion of the drinking water tank

ƒ Display of the current consumption in Watts and the cumulative kilowatt hoursorofthecurrentflowandthetemperature

ƒ Stainless steel pump housing protects against bacteria and corrosion

ƒ Wilo-Connector

Glandless premium smart pumps

Wilo-StratosMAXO-Z

Domestic hot water

20 30 40100 Q/m³/h0

4

6

8

2

10

12H/m Wilo-Stratos MAXO-Z

Smart glandless circulator with screwed connectionorflangeconnection,ECmo-tor with integrated power adjustment

Domestic hot water circulation systems and similar systems in industry and in building services

45 m3/h

12 m

ƒ Fluid temperature: drinking water max. +80 °C

ƒ Heatingwater-10 °Cto+110 °C ƒ Mainsconnection1~230 V,50 Hz ƒ NominaldiameterRp 1toDN 65 ƒ Max. operating pressure 10 bar

ƒ Control mode: Dynamic Adapt plus, ∆p-c,∆p-v,n-const,T-const,∆T-constandQ-const

ƒ Multi-Flow Adaptation ƒ Remote control via Bluetooth interface ƒ Selection of application range with Setup Guide

ƒ Heat meatering ƒ Desinfection detection ƒ Air-venting function ƒ Retrofitableinterfacemodulesforcommunication

ƒ Intuitive operation by guided applica-tion settings with the Setup Guide

ƒ Maximum drinking water hygiene and energyefficiencybythenew,innovativeand intelligent control function T-const.

ƒ Optimumhygienesupportthankstothermal disinfection.

ƒ Bluetooth interface for connection to mobile devices.

ƒ Maximum electric installation comfort by the optimised Wilo-Connector

ƒ Corrosion-resistant pump housing in stainless steel

Series extension



Heat

ing,

air

cond

ition

ing,

coo

ling

Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart


Wilo-Stratos-ZWilo-Stratos-ZD

Domestic hot water

20 3010 25 351550 Q/m³/h0

4

6

8

2

10

12H/m Wilo-Stratos-Z

Wilo-Stratos-ZD

Stratos-ZDStratos-Z

Glandless circulator with screwed con-nectionorflangeconnection,ECmotorwith automatic power adjustment

Domestic hot water circulation systems and similar systems in industry and in building services

41 m3/h

12 m

ƒ Fluid temperature: drinking water max. +80 °C

ƒ Heatingwater-10 °Cto+110 °C ƒ Mainsconnection1~230 V,50 Hz ƒ EnergyEfficiencyIndex(EEI)≤0.20(EEI≤0.23fordoublepumps)

ƒ NominaldiameterRp 1toDN 65 ƒ Max. operating pressure 10 bar

ƒ Controlmodes:∆p-c,∆p-v,∆p-T ƒ VolumeflowlimitationwithQ-Limitfunction (via IR-Stick)

ƒ Pre-selectable speed for constant operation

ƒ Automatic setback operation ƒ Graphical pump display ƒ Remote control via infrared interface (IR-Stick/IR-Monitor)

ƒ Retrofitableinterfacemodulesforcommunication

ƒ CombinationflangesPN6/PN10(forDN 40andDN 65)

ƒ Energy savings through greater system efficiencywiththeQ-Limitfunction

ƒ Space-saving installation due to com-pact design and location-dependent LC display

ƒ Retrofitableinterfacemodulesforcommunication (e.g. Modbus, BACnet, CAN,LONandPLR)

ƒ Corrosion-resistant pump housing in red brass for systems where oxygen entry is possible

ƒ Tried and tested quality and reliability


Wilo-YonosMAXO-Z

Domestic hot water

Wilo-Yonos MAXO-Z

2010 1550 Q/m³/h0

4

6

8

2

10

12H/m

Glandless circulator with screwed con-nectionorflangeconnection,ECmotorwith automatic power adjustment


22 m3/h

12 m

ƒ Permissible temperature range drink-ing water up to a water hardness of 3.57 mmol/l(20 °dH)max. +80 °C

ƒ Mainsconnection1~230 V,50 Hz ƒ NominaldiameterRp 1toDN 50 ƒ Max. operating pressure 10 bar

ƒ Controlmodes:Δp-c,Δp-v,3speedstages

ƒ LED display for setting the required delivery head

ƒ Quick electrical connection with Wilo plug

ƒ Motor protection, fault signal light and contact for collective fault signal

ƒ Corrosion-resistant pump housing in red brass

ƒ CombinationflangesPN6/PN10(forDN 40toDN 65)

ƒ LED display for indication of set deliv-ery head and fault codes

ƒ Quick setting when replacing an un-controlled standard pump with pre-set speedstages,e.g.TOP-Z

ƒ Electrical connection with Wilo plug ƒ Collective fault signal ensures system availability

ƒ Corrosion-resistant pump housing in red brass for systems where oxygen entry is possible

Standard glandless pumps

Wilo-Star-ZWilo-Star-ZD

Domestic hot water

6 82 40 Q/m³/h0

H/m

1

2

3

4

6

5

Wilo-Star-ZWilo-Star-ZD

Star-Z

Star-ZD

Glandless circulator with screwed con-nection


8.5 m3/h

6.0 m

ƒ Fluid temperature: drinking water up towaterhardness3.2 mmol/l(18 °dH)max.+65 °C

ƒ Mainsconnection1~230 V,50 Hz (DM=3~400 V,50 Hz)

ƒ ScrewedconnectionRp ½,Rp 1 ƒ Max.operatingpressure10 bar

ƒ Constant speed or 3 selectable speed stages (Star-Z 25/6),

ƒ Quick electrical connection with spring clips

ƒ Star-ZD version as double pump

ƒ All plastic parts that come into contact withthefluidfulfilKTWrecommen-dations



Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart


Wilo-TOP-Z

Domestic hot water

504020 30100 Q/m³/h0

2

4

6

8

H/m Wilo-TOP-Z

Glandless circulator with screwed con-nectionorflangeconnection


65 m3/h

9 m

ƒ Fluid temperature: drinking water max. +80 °C(+65°CforTOP-Z20/4andTOP-Z25/6)

ƒ Mains connection: ƒ 1~230V,50 Hz(dependingontype) ƒ 3~400V,50 Hz ƒ NominaldiameterRp 1toDN 65 ƒ Max.operatingpressure10 bar

ƒ Pre-selectable speed stages ƒ Thermal insulation as standard ƒ All plastic parts that come into contact withthefluidfulfilKTWrecommen-dations

ƒ CombinationflangePN6/PN10(DN 40toDN 65)

ƒ Thermal winding contact (WSK) as potential-free contact (depending on type)

ƒ Rotation control lamp indicates the correct direction of rotation (only for 3~)

ƒ Thermal insulation as standard

Glanded special pumps

Wilo-VeroLine-IP-Z

Domestic hot water

1 2 3 4 500

2

3

1

5

4

H/m

Q/m³/h

Wilo-VeroLine-IP-Z

Glanded circulator in in-line design with screwed connection

For pumping drinking water, cold and hot water without abrasive substances, in heating, cold water and cooling water systems

5 m3/h

4.5 m

ƒ Fluid temperature: drinking water up toawaterhardnessof4.99 mmol/l(28 °dH)max. +65 °C

ƒ Heatingwater-8 °Cto+110 °C ƒ Mainsconnection1~230 V,50 Hz,3~400 V,50 Hz

ƒ NominaldiameterRp 1 ƒ Max.operatingpressure10 bar


ƒ Mechanical seal ƒ Screwed connection ƒ Motor with one-piece shaft

ƒ Highresistancetocorrosivefluidsdueto stainless steel housing and Noryl impeller

ƒ Wide range of applications due to suitability for water hardness up to 5 mmol/l(28°dH)

ƒ All plastic parts that come into contact withthefluidfulfilKTWrecommen-dations


Heating, air-conditioning, cooling24 MF

Standard glandlesscirculatorsfor non-EU markets

Inside the EU* AccordingtotheErPDirective(2009/125/EG)withordinances(EG)641/2009and(EG)622/2012,uncontrolledstandard glandless circulators are no longer allowed to be sold in the EU from 1 January 2013 on.

Exceptions to this rule are products, like for example, glandless circulators which are integrated in heat generators. These excep-tions apply until the Directive prescribes also the replacement of newly installed heat generators or solar stations from August 2015 on.

Outside the EUPumps of the following series are allowed to be further distri-buted outside the EU, however in compliance with the legislation in force in these countries.

Star-RS/RSDTOP-S/SDTOP-RLStar-STG

NoteAnenergyefficiencyevaluationandaCEconformitydeclaration(CE mark) do no longer exist for these products.

*Austria,Belgium,Bulgaria,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France,Germany,Greece,Hungary,Ireland, Italy, Latvia, Lithuania, Luxemburg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Great Britain + Croatia (EU member from 2013 on), + Turkey (candidate country), + Serbia (candidate country) +4countriesoftheEFTA(EuropeanFreeTradeAssociation)Iceland,Norway,Liechtenstein,Switzerland

25

Heat

ing,

air

cond

ition

ing,

coo

ling

Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart


Wilo-Star-RSWilo-Star-RSD


3 41 2 50 Q/m³/h0

H/m

1234

67

5

Wilo-Star-RSWilo-Star-RSDStar-RS

Star-RSD


Hot-water heating systems of all kinds, industrial circulation systems, cold water and air-conditioning systems

6.0 m3/h

8.0 m

ƒ Fluidtemperature-10 °Cto+110 °C ƒ Mainsconnection1~230 V,50 Hz ƒ ScrewconnectionRp ½,Rp 1,Rp 1½ ƒ Max.operatingpressure10 bar

ƒ 3 manually selectable speed stages ƒ Wrench attachment point on pump body

ƒ Cable inlet possible from both sides - for easy installation


ƒ RSD version as double pump

ƒ Suitable for any installation position withhorizontalshaft;terminalboxin3-6-9-12o’clockposition

ƒ Three pre-selectable speed stages for load adaptation

ƒ Easy and safe installation with prac-tical wrench attachment point on the pump housing

ƒ Simplifiedelectricalconnectionthanksto a terminal box where the threaded cable connection can be taken out and usedfrombothsides;quickconnec-tion with spring clips


Wilo-TOP-SWilo-TOP-SD


20 40 60 80 1000 Q/m³/h0

4

8

16

12

H/m Wilo-TOP-SWilo-TOP-SD

TOP-S TOP-SD

Glandless circulator with screwed or flangedconnection


77 m3/h

19 m

ƒ Fluidtemperature-20 °Cto+130 °C ƒ Mains connection: ƒ 1~230V,50 Hz(dependingontype) ƒ 3~400V,50 Hz ƒ NominaldiameterRp 1toDN 100 ƒ Max operating pressure 10 bar (op-tional: 16 bar)

ƒ Preselectable speed stages for perfor-mance adaptation

ƒ CombinationflangesPN6/PN10(DN40 to DN 65)

ƒ Pump housing is KTL-coated ƒ Thermal insulation shells for heating applications as standard

ƒ Extendable motor protection

ƒ Rotation control lamp indicates the correct direction of rotation (only for 3~)

ƒ Manual power adjustment with 3 speed stages

ƒ Pump housing with cataphoretic (KTL) coating protects against corrosion due to condensation formation


Wilo-TOP-RL


981 2 3 4 5 6 700

23

1

567

4

H/m

Q/m³/h

Wilo-TOP-RL

Glandless circulator with screwed or flangedconnection


10 m3/h

7.0 m

ƒ Fluidtemperature-20 °Cto+130 °C ƒ Mainsconnection1~230 V,50 Hz,3~400 V,50 Hz

ƒ Nominal diameter Rp 1 to DN 40 ƒ Max operating pressure 10 bar (op-tional: 16 bar)

ƒ Preselectable speed stages for perfor-mance adaptation

ƒ Pump housing is KTL-coated ƒ CombinationflangePN6/PN10(DN40)

ƒ Collective fault signal as potential-free contact (depending on type)

ƒ Pump housing with cataphoretic (KTL) coating protects against corrosion due to condensation formation



Heat

ing,

air

cond

ition

ing,

coo

ling

VolumeflowQmax.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart


Wilo-Star-STG

Solar thermal and geothermal energy

2 310 Q/m³/h0

4

6

8

2

10H/m Wilo-Star-STG


Circulation in solar thermal and geother-mal energy systems

3.8 m3/h

11 m

ƒ Fluidtemperature-10 °Cto+110 °C,inshort-termduty(2h)+120°C

ƒ Mainsconnection1~230 V,50 Hz ƒ ScrewedconnectionRp ½,Rp1 ƒ Max.operatingpressure10 bar

ƒ 3 manually selectable speed stages ƒ Wrench attachment point on pump housing

ƒ Blocking-current proof motor, motor protection not required

ƒ Cable inlet on both sides for simple installation


ƒ Pump housing with cataphoretic coating

ƒ Special hydraulics for use in solar ther-mal and geothermal energy systems

ƒ Pump housing with wrench attach-ment point

ƒ Pump housing with cataphoretic (KTL) coating protects against corrosion due to condensate formation



Water supply 28

PUMPS AND SYSTEMS FOR RAINWATER UTILISATION, WATER SUPPLY AND PRESSURE BOOSTING, FIREFIGHTING, WATER PURIFICATION, RAW WATER INTAKE, DESALINATION AND PROFESSIONAL IRRIGATION/AGRICULTURE.

INTELLIGENT TECHNOLOGIES TO COMBAT WATER SHORTAGES.

29

RELIABLE CLEAN WATER SUPPLYThere are countries where the supply of clean water poses an enormous challenge. Jordan, for example, is one of the most arid countries in the world. Fresh water is pumped into the major cities from the Jordan Valley over a vertical distanceof1,400 metres.Thegrowingpopulationandold,leaky pipe systems further aggravate the problem. Wilo provided new equipment and above all expertise for the drinking water pumping station in Ebquoreyeh. Equipped with two efficient Wilo-EMU K pressure shroud pumps, energy saving systems and new monitoring, the pumping stationnowreliablysuppliesdrinkingwaterto50,000 in-habitants.Anditsavesmorethan1.5 millionkilowatthours,1,100 tonnesofCO2andover110,000 eurosinelectricity costs per year.

FLEXIBLE SOLUTIONS GUARANTEEDWhether rental, administrative or commercial buildings, dams, desalination plants, pumping stations or reservoirs for drinking water, Wilo creates individual water supply systems for a wide variety of constructions.

Water is one of the most precious resources on the planet. With a growing world population, more and more water is required for drinking, cleaning and hygiene, in agriculture and industry. Insufficient access to water is an urgent problem worldwide –andamajorsourceofpotentialconflict.Theextractionandsupplyofwaterarethereforeamongthemostimportant challenges of the future. Wilo develops pumps and systems that enable the use and optimisation of new sourcesandmethodsofwatercollection.Ourflexiblesolutionsensureareliablesupplywhileadaptingtotherequire-ments of buildings that range from multi-family houses, schools to industrial parks. With individual concepts and highly efficient technologies, we advance the construction of intelligent networks as well as the availability of decentralised water purification systems.

INTELLIGENT TECHNOLOGIES TO COMBAT WATER SHORTAGES.

Wat

er s

uppl

y

Please click “Play” and discover Wilo-Actun ZETOS-K8, our submersible pump with maximum efficiency.

https://goo.gl/ZHAvDb

Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart

Rainwater utilisation systems

Wilo-RainSystem AF BasicWilo-RainSystem AF Comfort

Rainwater utilisation

2 41 30 Q/m³/h

H/m

10

20

30

40

50

Wilo-RainSystemAF Basic AF Comfort

Ready-to-plug rainwater utilisation sys-tem with 1 MultiCargo MC self-priming centrifugal pump

Rainwater utilisation for saving drinking water in conjunction with rainwater storage tanks or reservoirs

5 m3/h

52 m

ƒ Mainsconnection1~230 V,50 Hz ƒ Suctionheadmax.8 m ƒ Fluidtemperaturemax.+5 °Cto+35 °C

ƒ Max.operatingpressure8 bar ƒ Replenishmentreservoir11 lwithfloatvalve

ƒ ProtectionclassIP 42/IP54

ƒ Connection-ready module mounted on a non-corroding base frame

ƒ Pressure-side pipework Rp 1 ƒ 1.8/3.0 m connection cable and mains plug

ƒ Switchgear Rain Control Basic RCB/ Economy RCE with control electronics

ƒ Monitoring of rainwater storage levels ƒ Connectionforoverflowwarning

ƒ Low-noise, due to encapsulated sys-tem (Comfort) and multistage pump

ƒ SystemfulfillsDIN 1989andEN 1717 ƒ Demand-oriented,flow-andnoise-optimised fresh water replen-ishment

ƒ Media-touched components are corrosion-free

ƒ Automatic support function for evacu-ation of air (Comfort)


Wilo-RainSystem AF 150


4 6 8 10 12 1420 Q/m³/h0

H/m

20

10

40

30

50Wilo-RainSystem AF 150

Automatic rainwater utilisation system with 2 MultiCargo MC self-priming cen-trifugal pumps

Rainwater utilisation in multi-family houses and small businesses for saving drinking water in conjunction with rain-water storage tanks or reservoirs

16 m3/h

55 m

ƒ Mainsconnection1~230 V,50 Hz ƒ Suctionheadmax.8 m ƒ Fluidtemperaturemax.+5 °Cto+35 °C

ƒ Max.operatingpressure8 bar ƒ Replenishmentreservoir150 lwithfloatvalve

ƒ ProtectionclassIP 41

ƒ Connection-ready module on vibra-tion-insulated tubular frame

ƒ PressuresidedjointtubingR1½withtransmitter unit, diaphragm pressure vessel, shut-off device

ƒ Pressure gauge 0-10 bar ƒ Ball valve on suction/pressure sides ƒ Central switchgear (RCP) with control electronics, level sensor

ƒ Menu-prompted operation and display ƒ Pump cycling and test run ƒ Automatic fault-actuated switchover, peak-load operation plus water ex-change in the replenishment reservoir

ƒ Low-noise due to multistage pumps ƒ Media-touched components are corrosion-free

ƒ Maximum operational reliability due to fully electronic controller (RCP)

ƒ Demand-oriented fresh water replen-ishment

ƒ Highreliabilityduetoflow-optimisedand noise-optimised replenishment reservoir


Wilo-RainSystem AF 400


4 6 8 10 12 1420 Q/m³/h0

H/m

20

10

40

30

50Wilo-RainSystem AF 400

Automatic rainwater utilisation system with run-down tank and 2 MultiPress MP non self-priming centrifugal pumps

Hybrid system for commercial and indus-trial rainwater utilisation for saving drink-ing water in conjunction with rainwater storage tanks or reservoirs

16 m3/h

55 m

ƒ Mainsconnection3~400 V,50 Hz ƒ Fluidtemperaturemax.+5 °Cto+35 °C

ƒ Max.operatingpressure10 bar ƒ Replenishmentreservoir400 l ƒ ProtectionclassIP 54

ƒ Connection-ready module on vibra-tion-insulated baseplate

ƒ PressuresidedjointtubingR1½withtransmitter unit, diaphragm pressure vessel, shut-off device

ƒ Pressure gauge 0-10 bar ƒ Ball valve on suction/pressure sides, non-return valve

ƒ Hybrid tank with all connections, calmedinletsandoverflowwithsiphon

ƒ Central switchgear (RCH) with control electronics

ƒ Pump cycling and test run ƒ Automatic fault-actuated switchover, peak-load operation plus water ex-change in the replenishment reservoir

ƒ Low-noiseduetoflow-andnoise-op-timised overall concept with multi-stage pumps

ƒ Media-touched components are corrosion-free

ƒ Maximum operational reliability due to a fully electronic controller (RCH)

ƒ Demand-oriented fresh water replen-ishment

ƒ Automatic control of the feeding pump

ƒ System/level control in the low-volt-age range


Water supply30 31

Wat

er s

uppl

y

Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart

Self priming pumps, self-priming multi-stage pumps and pump systems

Wilo-Jet WJWilo-Jet HWJWilo-Jet FWJ/FWJ SmartHome

Rainwater utilisation, water supply/pres-sure boosting, raw water intake

3 4 5210 Q/m³/h0

H/m

20

10

40

30

Wilo-Jet WJ / HWJ / FWJ

Self-priming single-stage centrifugal pumps

Forpumpingwaterfromwellsforfilling,pumping empty, transferring by pumping, irrigation and sprinklingAsemergencypumpforoverflows

5 m3/h

50 m

ƒ Mainsconnection1~230 V,50 Hz/3~400 V,50 Hz

ƒ Inletpressuremax.1 bar ƒ Fluidtemperaturemax.+5 °Cto+35 °C

ƒ Max.operatingpressure6 bar ƒ ProtectionclassIP 44

ƒ With or without carrying frame, de-pending on the version (WJ, FWJ)

ƒ Forsingle-phaseACmotor(1~230 V) ƒ Connection cable with plug ƒ On/Offswitch ƒ Thermal motor protection switch

ƒ Ideal for portable outdoor applications (hobby, garden)

ƒ HWJ version with diaphragm pressure vessel and pressure switch

ƒ FWJversionwithfluidcontrolforsystem control

ƒ FWJ SmartHome version with addi-tional adapter plug which enables the integration of the pump into a Smart Home system. A wibutler app allows controlling pump operation via a smartphone and customising it (e.g. combination with a moisture sensor)

Self- and non self-priming multistage pumps and pump systems

Wilo-HiMulti 3 (P)Wilo-HiMulti 3 C (P)Wilo-HiMulti 3 H (P)


0 2 31 4 5 6 Q/m³/h0

10

20

30

40

50H/m Wilo-HiMulti 3 /..C /..H

Self-priming (version P) and non self-priming multistage pumps and pump systems

For domestic potable water supply, sprin-kling, irrigation, spraying and rainwater utilisation

7 m3/h

55 m

ƒ Mainsconnection1~230V,50 Hz ƒ Inlet pressure max. 3 bar ƒ Fluidtemperaturemax.0 °Cto ƒ +40 °C(+55 °Cformax.10minutes) ƒ Operatingpressuremax.8bar ƒ Protection class IP X4, IP 54

ƒ Directlyflangedmotor ƒ Thermal motor protection switch for 1~230 V version

ƒ Version HiMulti 3 C (P): Automatic pump control, low-water level switch

ƒ Version HiMulti 3 H (P): Pressure switch, diaphragm pressure vessel 50 l/100 l

ƒ Easy:Electricalquickconnector,On/Offswitch,capforfillinganddraining,enlarged foot fastening

ƒ Efficientandeconomical:highlyeffi-cient hydraulics, extremely compact

ƒ HiMulti 3 C (P): Automation and dry-running protection, automation rotatableby360°foreasierinstallation

ƒ HiMulti 3 H (P): Automation and water hammer protection

Non self-priming peripheral pump

Wilo-HiPeri 1

Water supply/ pressure boosting, raw water intake, rainwater utilisation

Wilo-HiPeri

0 5 10 15 20 25 30 35 Q/l/min

HiPeri 1-5

HiPeri 1-4

30

40

50

20

10

0

H/m

Non self-priming peripheral pump

For water supply/pressure boosting, raw water intake, sprinkling and spraying, rainwater utilisation

50 m3/h

3 m

ƒ Mainsconnection1~230V,50 Hz ƒ Inlet pressure max. 1.5 bar ƒ Fluidtemperaturemax.+5 °Cto+60 °C

ƒ Max. operating pressure 6.5 bar ƒ Protection class IP x4 ƒ Suction/pressure side connections: Rp 1"

ƒ Single-stage displacement pump with a radial impeller

ƒ Can be supplemented by the Wilo-FluidControl resp. HiControl 1

ƒ Simple handling thanks to low weight, perfectly suited for permanent oper-ation

ƒ Brassimpellerforfluidsupto60 °Candambienttemperaturesupto40 °C

ƒ Efficientthankstolowpowercon-sumption at a high maximum delivery headandhighmaximumvolumeflow

ƒ Expandable with the electronic pump control Wilo-Fluidcontrol/HiControl 1


Water supply30 31

Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart

Non self-priming water-supply unit with frequency converter

Wilo-EMHIL


4 62 3 5 710 Q/m³/h0

H/m

20

10

40

30

50Wilo-EMHIL

Non self-priming water-supply unit with frequency converter

Water supplyRainwater utilisationIrrigation and spraying

8 m3/h

55 m

ƒ Max. operating pressure: 10 bar ƒ Max.fluidtemperature:40 °C ƒ Min.fluidtemperature:0 °C ƒ Max.ambienttemperature:50 °C ƒ Mainsconnection:1~230V,50/60 Hz

ƒ Including 1.4 m mains connection and plug

ƒ IncludingEMCfilter ƒ Withbuilt-inpressureandflowcon-trollers

ƒ Heavy-duty multistage pump with stainless steel hydraulics

ƒ Easy operation and adjustment: ƒ Large display screen ƒ LEDs for status display ƒ Plug & Pump ƒ Functions: PID, frost protection, restart after a fault

ƒ Float switch can be connected as an option

Cistern pumps

Wilo-Sub TWI 5/TWI 5-SEWilo-Sub TWI 5-SE PnP


4 6 8 10 12 1420 Q/m³/h0

H/m

40

20

80

60

Wilo-Sub TWI 5

Submersible pumps

For domestic water supply from wells, rainwater storage tanks, and reservoirs. For irrigation, sprinkling, rainwater utili-sation or for pumping out water

16 m3/h

88 m

ƒ Mains3~400Vor1~230 V±10%50 Hz

ƒ Fluidtemperaturemax.+40 °C ƒ Max.operatingpressure10 bar ƒ ProtectionclassIP 68 ƒ Pressure-sideRp 1¼ ƒ Suction-side(SEversion)Rp 1¼

ƒ Connectioncable,20 m ƒ TWI 5 version with standard intake strainer

ƒ Variants: ƒ SE: with lateral inlet connecting piece ƒ FS:withbuilt-infloatswitch ƒ Thermal motor protection for EM version(1~230 V)

ƒ Ready-to-plug in EM version (1~230 V)

ƒ Pump (housing, stages, impellers) made entirely of stainless steel 1.4301 (AISI 304)

ƒ Self-cooling motor enables installation outside water

Non self-priming water-supply unit

Wilo-EconomyCOE-2TWI5

Water supply/pressure boosting

0 4 8 12 16

Wilo-COE 2 TWI 5

Q/m³/h0

20

30

40

10

50

60H/m

Pressure boosting system with two paral-lel submersible pumps

Pressure boosting and water supply in residential applications and for small commercial installations that require compact construction and a low noise level

17 m3/h

68 m

ƒ Mains3~400Vor1~230 V±10%50 Hz

ƒ Fluidtemperaturemax:+40°C ƒ Operatingpressuremax:10bar ƒ Nominal connection diameters G 2"

ƒ Intakeandoutflowcollectorpipes ƒ Ball shut-off valves on the suction side and pressure side

ƒ Non-return valve on the pressure side ƒ 1 manometer ƒ 2 pressure switches ƒ BC switchgear

ƒ Pumps in the TWI 5 series with low noise due to water-cooled motor, between 51 dB (A) and 61 dB (A)

ƒ 2-pump pressure boosting system in compact design due to vertical pump layout

ƒ Economical system, based on the basic functions of the BC switchgear

ƒ Long service life due to the stainless steel construction of the pumps and the piping


Water supply32 33

Wat

er s

uppl

y

Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart

Vertical, multistage centrifugal pumps

Wilo-Helix EXCEL


50 604020 30100 Q/m³/h0

H/m

40

80

120

160

200

240Wilo-Helix EXCEL

Nonself-priming,highlyefficient,fullystainless steel high-pressure multistage centrifugal pump with EC motor and integratedhigh-efficiencydrive

Water supply and pressure boostingIndustrial circulation systemsProcess waterClosed cooling circuitsWashing systems, Irrigation

80 m3/h

240 m

ƒ Fluidtemperature:-30to+120 °CwithEPDM(-10to+90 °CwithFKM)

ƒ Max. operating pressure: 16/25 bar ƒ Protection class IP 55 ƒ MinimumefficiencyindexMEI≥0.7(HelixEXCEL16:MEI≥0.5)

ƒ Impellers, stage chambers and pump housing made of stainless steel 1.4301/1.4404 (AISI 304L/AISI 316L)

ƒ Helix EXCEL 2 - 16, PN 16 with oval flanges,PN25withroundflanges

ƒ Helix EXCEL 22 - 36, with round flanges

ƒ EC IE5 Motor ƒ Integrated electronic control

ƒ High-efficiencyECmotor(energyefficiencyclassIE5acc.toIEC60034-30-2)

ƒ Integrated electronic control “High EfficiencyDrive”

ƒ Easy operation thanks to proven Green Button Technology and clear display

ƒ User-friendly cartridge mechanical seal “X-Seal” and spacer coupling (from 5.5 kW)

ƒ Flexible connection to building auto-mation

ƒ Drinking water approval


Wilo-Helix VE


0

H/m

60 70504020 30100 Q/m³/h

40

80

120

160

200

240Wilo-Helix VE

Non self-priming multistage pump with integrated frequency converter


80 m3/h

240 m

ƒ Fluidtemperature-30to+120 °CwithEPDM(-10to+90°CwithFKM)

ƒ Max. operating pressure 16/25 bar ƒ Max. inlet pressure 10 bar ƒ Protection class IP 55 ƒ MinimumefficiencyindexMEI≥0.7(HelixVE16:MEI≥0.5)


ƒ HelixVE2-16,PN16withovalflang-es,PN25withroundflanges

ƒ HelixVE22-36,withroundflanges ƒ IEC standard motor ƒ Integrated frequency converter

ƒ Multistage,speed-configurablestain-lesssteelhigh-efficiencypumpwith2D/3D hydraulics

ƒ Optimiseddesignforeasyoperation,transportation and installation with handles, lantern adjustment and rotat-ablefreeflanges

ƒ User-friendly display with Green But-ton Technology and full text menu

ƒ IF plug-in module for quick communi-cation with the BMS



Wilo-Helix V

Water supply/pressure boosting, profes-sional irrigation/agriculture

0

H/m

60 70504020 30100 Q/m³/h

4080

120160200240280

Wilo-Helix V

Non self-priming multistage pump


80 m3/h

280 m

ƒ Fluidtemperature-30to+120 °CwithEPDM(-10to+90°CwithFKM)

ƒ Max.operatingpressure16/25/30 bar ƒ Max. inlet pressure 10 bar ƒ Protection class IP 55 ƒ MinimumefficiencyindexMEI≥0.7(HelixV16:MEI≥0.5)


ƒ HelixV2-16,PN16withovalflanges,PN25withroundflanges

ƒ HelixV22-36,withroundflanges ƒ IEC standard motor

ƒ Efficiency-optimised,laser-welded2D/3Dhydraulics,flowanddegassingoptimised

ƒ Corrosion-resistant impellers, guide vanes and stage housings

ƒ Maintenance-friendly design with particularly robust coupling guard


IE


Water supply32 33

Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart


Wilo-Helix FIRST V


40 50 60 7020 30100 Q/m³/h0

H/m

4080

240200

120160

280Wilo-Helix FIRST V


Water distribution and pressure boostingIndustrial circulation systemsProcess waterClosed cooling circuitsWashing systems, Irrigation

80 m3/h

280 m

ƒ Fluidtemperaturerange:-20to120 °C ƒ Max. operating pressure: 16/25/30 bar ƒ Protection class: IP 55 ƒ MinimumefficiencyindexMEI≥0.7(HelixFIRSTV16:MEI≥0.5)


ƒ Helix FIRST V 2 - 16, PN 16 with oval flanges,PN25withroundflanges

ƒ Helix FIRST V 22 - 36, with round flanges

ƒ IEC standard motor

ƒ Efficiency-optimised,laser-welded,optimised 2D/3D hydraulics


ƒ Flow and degassing-optimised hy-draulic parts

ƒ Reinforcedpumphousing,flowandNPSH-optimised

ƒ Space-saving and easy maintenance thanks to compact design

Vertical and horizontal, multistage centrifugal pumps

Wilo-Zeox FIRST HWilo-Zeox FIRST V


Zeox FIRST V

Zeox FIRST H

Wilo-Zeox FIRST

0 50 100 150 200 250 Q/m³/h

300

400

200

100

0

H/m

Non-self-priming,high-efficiencymulti-stage high-pressure centrifugal pump in verticalorhorizontaldesignwithoff-lineconnections

Professional irrigation/agricultureWater supply/pressure boostingFirefightingHeatingair-conditioning, cooling

280 m3/h

495 m

ƒ Fluidtemperature:-5 °Cto+90 °C ƒ Max. suction pressure: Zeox FIRST .. V/ .. H: 6/16 bar Max. operating pressure: Zeox FIRST V: 27 bar Zeox FIRST H (DN 65toDN100):50bar;ZeoxFIRSTH(DN 150): 40 bar

ƒ Protection class: IP 55

ƒ IE3high-efficiencymotorasstandard ƒ Flushing by-pass device to ensure a long service life

ƒ Packing gland on request, exchangea-ble without disassembling the pump

ƒ High-efficiencyhydraulicsandhigh-efficiencyIE3motor

ƒ Standard rinsing device for the sealing system

ƒ Additionalflangealignmentsandstuffingboxpackingonrequest

ƒ Bronzeimpelleronrequest


Wilo-Multivert MVIE


Wilo-Multivert MVIEH/m

0

20

40

60

80

100

Q/m³/h0 20 40 60 80 100 120 140



145 m3/h

100 m

ƒ Fluidtemperature-15to+120 °C ƒ Max.operatingpressure16 bar/25 bar ƒ Max. inlet pressure 10 bar ƒ Protection class IP 55 ƒ MinimumefficiencyindexMEI≥0.4

ƒ Stainless steel hydraulics with pump housing made of cast iron

ƒ MVIE70..to95..PN16/25withroundflange

ƒ IEC standard motor ƒ Integrated frequency converter with Green Button Technology and LCD display for status indication

ƒ Easy commissioning ƒ Integrated frequency converter with large control range

ƒ Full motor protection


Water supply34 35

Wat

er s

uppl

y

Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart


Wilo-Multivert MVI


0

H/m

1008040 60200 Q/m³/h

40

80

120

160

200Wilo-Multivert MVI



155 m3/h

240 m

ƒ Fluidtemperature-15to+120 °C ƒ Max. operating pressure 16/25 bar ƒ Max. inlet pressure 10 bar ƒ Protection class IP 55 ƒ MinimumefficiencyindexMEI≥0.4

ƒ MVI70..to95..PN 16/PN 25withroundflange

ƒ IEC standard motor, 2-pole

ƒ MVI70..-95..instainlesssteelwithpump housing made of cataphoret-ic-coated cast iron

Sectional pumps

SeriesRN,HS,IPB,PJ,STDPLURO,FG/FH

Industrial process

Multistage high-pressure multistage centrifugal pump in sectional construc-tion, mounted on baseplate

Metal industry, mine dewatering, desali-nationplants,boilersupply,firefighting,high-pressure cleaning, water supply

1,000 m3/h

1800 m

ƒ Permitted temperature range up to +80 °C,orupto+160 °Conrequest

ƒ Max. operating pressure 180 bar ƒ Nominal diameter on pressure side DN 32toDN 250

ƒ 2-or4-pole50 Hzmotors,60 Hzonrequest

ƒ 2 to 15-stage industrial version ƒ Screwed segments ƒ Hydraulic axial compensation ƒ Shaft sealing with mechanical seal or stuffingboxpacking

ƒ Optionallywithmultiplepressureoutletsfore.g.fireextinguishingapplications

ƒ Supplied as a complete unit: with pump, coupling, motor mounted on baseplate or without motor or as pump only, with free shaft end

ƒ Modular design ensures pump versions in a variety of materials and versions which can be adapted to meet cus-tomer demands precisely

ƒ Hydraulic pressure compensation relieves load on bearings and ensures a longer service life

ƒ Multiple optional pressure connec-tions allow different pressures to be supplied from a single pump


Wilo-Multivert MVISE


0

H/m

121084 620 Q/m³/h

20

40

60

80

100Wilo-Multivert MVISE-2G

Non self-priming multistage pump with glandless pump motor and integrated frequency converter

Water supply and pressure boosting

14 m3/h

110 m

ƒ Fluidtemperature-15to+50 °C ƒ Max.operatingpressure16 bar ƒ Max.inletpressure16 bar ƒ ProtectionclassIP 44

ƒ Multistage, non-self-priming, vertical high-pressure centrifugal pump in in-line design

ƒ Glandless three-phase motor with integral water-cooled frequency converter

ƒ HydraulicconnectionwithovalflangesPN16.Counterflangesmadeofstain-less steel with female thread, screws and gaskets (scope of delivery)

ƒ Glandless pump technology ƒ Virtually noiseless operation (up to 20dB[A]quieterthanconventionalpumps)

ƒ Space-saving, compact design ƒ Virtually maintenance free thanks to a design which does not feature any mechanical seals

ƒ Drinking water approval for all com-ponents that come in contact with the fluid(EPDMversion)

no illustration


Water supply34 35

Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart


Wilo-Multivert MVIS


0

H/m

1084 620 Q/m³/h

20

40

60

80

100Wilo-Multivert MVIS

Non self-priming multistage pump with glandless pump motor

Water supply and pressure boosting

14 m3/h

110 m

ƒ Fluidtemperature-15to+50 °C ƒ Max. operating pressure 16 bar ƒ Max.inletpressure10 bar ƒ ProtectionclassIP 44

ƒ Multistage, non-self-priming, vertical high-pressure centrifugal pump in in-line design

ƒ Glandless three-phase motor ƒ HydraulicconnectionwithovalflangesPN16.counterflangesmadeofstain-less steel with female thread, screws and gaskets (scope of delivery)

ƒ Glandless pump technology ƒ Virtually noiseless operation (up to 20dB[A]quieterthanconventionalpumps)

ƒ Space-saving, compact design ƒ Virtually maintenance free thanks to a design which does not feature any mechanical seals

ƒ Drinking water approval for all com-ponents that come in contact with the fluid(EPDMversion)

Horizontal, multistage centrifugal pumps

Wilo-Economy MHIE


0

H/m

20 24168 1240 Q/m³/h

20

40

60

80

Wilo-Economy MHIE


Water supply and pressure boostingIndustrial circulation systemsProcess engineeringCooling water circulation systemsWashing and sprinkling systems

32 m3/h

88 m

ƒ Fluidtemperature-15to+110 °C ƒ Max.operatingpressure10 bar ƒ Inletpressuremax.6 bar ƒ ProtectionclassIP 54

ƒ Stainless steel in monobloc design ƒ Threaded connection ƒ Integrated frequency converter ƒ Single-phase or three-phase AC motor ƒ Three-phase version with LCD ƒ display for status indication ƒ Integrated thermal motor protection

ƒ Easy commissioning ƒ All parts that come in contact with the fluidaremadeofstainlesssteel

ƒ Compactdesign ƒ Integrated frequency converter ƒ Full motor protection ƒ WRAS/KTW/ACS approval for all parts thatcomeincontactwiththefluid(EPDM version)


Wilo-Economy MHI


0

H/m

208 104 5320 Q/m³/h

20

40

6070

10

30

50

Wilo-Economy MHI


Water supply and pressure boostingCommerce and industryCooling water circulation systemsWashing and sprinkling systems

25 m3/h

70 m


ƒ Stainless steel pump in monobloc design

ƒ Threaded connection ƒ Single-phase or three-phase AC motor ƒ Single-phase AC motor with integrat-ed thermal motor protection

ƒ All parts that come in contact with the fluidaremadeofstainlesssteel

ƒ Compact design ƒ WRAS/KTW/ACS approval for all parts thatcomeincontactwiththefluid(EPDM version)


Water supply36 37

Wat

er s

uppl

y

Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart


Wilo-Economy MHIL


0

H/m

6 8 10420 Q/m³/h

20

40

60

10

30

50

Wilo-Economy MHIL


Water supply and pressure boostingCommerce and industryWashing and spraying systemsRainwater utilisationCooling and cold water circulation systems

13 m3/h

68 m


ƒ Pump in monobloc design ƒ Threaded connection ƒ Single-phase or three-phase AC motor ƒ Single-phase AC motor with integrat-ed thermal motor protection

ƒ Impellers and stage chambers made of 1.4301 stainless steel (AISI 304)

ƒ Pump housing made of grey cast iron EN-GJL-250, with cataphoretic coating


Wilo-Multivert MVIL


0

H/m

10 1284 620 Q/m³/h

20

40

60

80

120

100

Wilo-Multivert MVIL


Water supply and pressure boostingCommerce and industryWashing and spraying systemsRainwater utilisationCooling and cold water circuits

13 m3/h

135 m

ƒ Fluidtemperature-15to+90 °C ƒ Max. operating pressure or max. 10 or 16 bar, depending on type

ƒ Max. inlet pressure 6 or 10 bar, de-pending on type

ƒ Protection class IP 54 ƒ MinimumefficiencyindexMEI≥0.4

ƒ Pump in in-line design ƒ Hydraulics in 1.4301, pump housing in EN-GJL-250

ƒ Ovalflange ƒ Single-phase or three-phase AC motor

ƒ Space-saving, compact block design

Single-pump pressure boostingsystems with speed-controlled pump

Wilo-Comfort-N-VarioCOR-1MVISE…Wilo-Comfort-VarioCOR-1MVIE…Wilo-SiBoost Smart 1 Helix VE ...Wilo-Comfort-VarioCOR-1MHIE...Water supply/pressure boosting

0

H/m

60 80 100 120 14040200 Q/m³/h

2040

8060

120100

140

Water-supply units with a non self-prim-ing, high-pressure multistage centrifugal pump with integrated speed control of the series MVISE, MVIE, Helix VE or MHIE

Fully automated water supply in inlet mode from the public water supply net-work or a reservoirFor pumping drinking/process water, coolingwater,waterforfire-fighting

165 m3/h

142 m

ƒ Mainsconnection3~400 V,50 Hz ƒ Max.fluidtemperature50 °C ƒ Operatingpressure10/16 bar ƒ Inletpressure6/10 bar ƒ ProtectionclassIP 44/IP54

ƒ All parts that come in contact with the fluidarecorrosion-resistant

ƒ Pipework made of stainless steel 1.4571

ƒ Shut-off device, on the pressure side ƒ Non-return valve, on the pressure side ƒ Diaphragm pressure vessel 8 l, PN 16

ƒ For systems with MVISE pump applies: Up to 20 dB(A) quieter than compara-ble systems

ƒ ForsystemswithHelix VEpump ƒ Optimisedhydraulics ƒ Cartridge mechanical seal ƒ IE4 standard motor


Water supply36 37

Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart

Single-pump pressure boosting systems

Wilo-EconomyCO-1MVIS…/ERWilo-EconomyCO-1MVI…/ERWilo-EconomyCO-1Helix V…/CE+


0

H/m

60 80 10040200 Q/m³/h

2040

8060

120100

160140

Water supply systems with a non self-priming, high-pressure multistage centrifugal pump of the series MVIS, MVI or Helix V

Fully automated water supply in inlet mode from the public water supply net-work or a reservoirFor pumping drinking/process water, coolingwater,waterforfire-fighting

135 m3/h

160 m

ƒ Mainsconnection3~230 V/400 V,50 Hz

ƒ Max.fluidtemperature50 °C ƒ Operatingpressure10/16 bar ƒ Inletpressure6/10 bar ƒ Switching pressure stages 6 / 10 / 16 bar

ƒ ProtectionclassIP 41/IP54

ƒ Components that come in contact withfluidarecorrosion-resistant

ƒ Base frame made of stainless steel 1.4301 with height-adjustable vibra-tion absorbers for insulation against structure-borne noise


ƒ Shut-off device, on the pressure side ƒ Non-return valve, on the pressure side ƒ Diaphragm pressure vessel 8 l, PN 16, on pressure side

ƒ For systems with MVIS pump applies: Up to 20 dB(A) quieter than compara-ble systems

ƒ ForsystemswithHelix Vpump ƒ Optimisedhydraulics ƒ Cartridge mechanical seal ƒ IE3 standard motors for Helix V

Single-pump pressure boostingsystem with system separation

Wilo-EconomyCO/T-1HelixV…/CEWilo-Comfort-VarioCOR/T-1HelixVE… -GE


6 8 10420 Q/m³/h0

H/m

20

40

80

60

100

Water supply systems with system sepa-ration and a non self-priming, high-pres-sure multistage centrifugal pump of the Helix V or VE series

Fully automated water supply in inlet mode from the public water supply networkFor pumping drinking/process water, coolingwater,waterforfire-fighting

10 m3/h

120 m

ƒ Mainsconnection3~230 V/400 V,50 Hz(otherversionsonrequest)

ƒ Max.fluidtemperature40 °C ƒ Operatingpressure16 bar ƒ Inletpressure6 bar ƒ ProtectionclassCO/T=IP54, COR/T=IP55

ƒ PE break tank, atmospherically venti-lated (150 l)



ƒ Shut-off device, on the pressure side ƒ Non-return valve, on the pressure side ƒ Breaktankincludingfloatvalveandfloatswitch

ƒ Diaphragmpressurevessel8 l,PN16,on pressure side

ƒ Low-water cut-out switchgear

ƒ Compact system, ready for connec-tion, for all applications that require system separation

ƒ High-efficiencypumphydraulics ƒ Helix V with IE3 standard motors ƒ Helix VE with IE4 standard motors

Multi-pump pressure boostingsystems with speed-controlled pumps

Wilo-SiBoost Smart (FC) Helix VWilo-SiBoost Smart Helix VEWilo-SiBoost Smart Helix EXCEL


0

H/m

150 200 300250100500 Q/m³/h

2040

8060

120100

140

Highlyefficientpressureboostingsystemwith 2 to 4 stainless steel, non self-prim-ing, high-pressure multistage centrifugal pumps (Helix V, VE or EXCEL) switched in cascade or as synchronous motor speed

Fully automatic water supply/pressure boostinginresidential/officebuildingsand in industrial systemsFor pumping drinking/process water, coolingwater,waterforfire-fighting

360 m3/h

158 m

ƒ Mains connection: - HelixV:3~230V/400V,50 Hz - HelixVEandEXCEL:3~400V,50 Hz

ƒ Max.fluidtemperature70 °C ƒ Operatingpressure16bar(25baroptional)

ƒ Inlet pressure 10 bar ƒ Protection class IP 54

ƒ Automatic pump control via Smart Controller SC

ƒ New innovative pressure-variable control for Helix VE and EXCEL

ƒ Componentsincontactwithfluidarecorrosion-resistant

ƒ Shut-off device on suction and pres-sure sides of each pump

ƒ Non-return valve, pressure sensor, diaphragm pressure vessel 8 l, PN 16, on pressure side

ƒ Low-water sensor standard for VE and EXCEL

ƒ High-efficiencypumphydraulics ƒ Helix V with IE3 standard motors, Helix VE with IE4, Helix EXCEL with High- efficiencyECmotor(energyefficiencyclass IE5 acc. to IEC 60034-30-2)

ƒ Hydraulics of entire system are pres-sure-loss optimised

ƒ Integrated dry-running detection and low water cut-out switch

IE

NEW NEW

IE


Water supply38 39

Wat

er s

uppl

y

Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart


Wilo-Comfort-Vario-COR2-4MHIE…/VRWilo-Comfort-N-Vario-COR2-4MVISE…/VRWilo-Comfort-Vario-COR2-4MVIE…/VR


0

H/m

200 300100 5004000 Q/m³/h

2040

8060

120100

140

Pressure boosting system with 2 to 4 non self-priming, stainless steel, high-pres-sure, multistage centrifugal pumps switched in parallel, with integrated speed control


650 m3/h

110 m

ƒ Mainsconnection3~400 V,50/60 Hz,dependingontypealso1~230 V,50/60 Hz

ƒ Max.fluidtemperature70 °C ƒ Operatingpressure10/16 bar ƒ Inletpressure6/10 bar ƒ ProtectionclassIP 54

ƒ Continuous auto control due to pumps with integrated frequency converters



ƒ Shut-off device at each pump, on the suction and pressure sides

ƒ Non-return valve, on the pressure side ƒ Diaphragmpressurevessel8 l,PN16,on pressure side

ƒ Pressure sensor, on the discharge side

ƒ Compact system due to high-pressure, multistage centrifugal pumps with integrated frequency converters

ƒ Integrated full motor protection via PTC

ƒ Integrated dry-running detection and low water cut-out switch

ƒ For systems with MVISE pumps applies: Up to 20 dB(A) quieter than comparable systems


Wilo-Comfort-N-COR2-6MVIS…/CCWilo-Comfort-COR2-6MVI…/CCWilo-Comfort-COR2-6Helix V…/CCWilo-Comfort-COR2-6Helix VE…/CCeWater supply/pressure boosting

0

H/m

200 300100 500 7006004000 Q/m³/h

2040

8060

120100

160140

Pressure boosting system with speed control and 2 to 6 non self-priming, stainless steel, high-pressure, multistage centrifugal pumps switched in cascade


800 m3/h

160 m

ƒ Mainsconnection3~230/400 V,50 Hz


ƒ Continuous auto control of the base-load pump via frequency converter integrated in the CC controller






ƒ Compact system in accordance of DIN 1988(EN 806)

ƒ SerieswithHelix VEintegratedfre-quency converter

ƒ For systems with MVIS pumps applies: Up to 20 dB(A) quieter than compara-ble systems

Multi-pump pressure boosting systems

Wilo-EconomyCO2-4MHI…/ERWilo-EconomyCO2-4Helix…/CEWilo-Comfort-N-CO2-6MVIS…/CC Wilo-Comfort-CO2-6MVIorHelix V…/CCWater supply/pressure boosting

0

H/m

200 300100 500 7006004000 Q/m³/h

2040

8060

120100

160140

Pressure boosting system with 2 to 4 respectively 2 to 6 non self-priming, stainless steel, high-pressure, multistage centrifugal pumps switched in cascade


800 m3/h

160 m

ƒ Mainsconnection3~230 V/400 V,50 Hz







ƒ Compact system in accordance of DIN 1988(EN 806)

ƒ For systems with MVIS pumps applies: Up to 20 dB(A) quieter than compara-ble systems


Water supply38 39

Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart

Fire-fighting systems for wall hydrant installations according to DIN 14462

Wilo-FLA

Firefighting

0

H/m

40 50 60 70 80 9020 30100 Q/m³/h

20406080

120100

140Wilo-FLAHelix V, MVI

Pressureboostingsystemforfireextinguishing applications with 1 to 2 au-tonomously operating, non self-priming, stainless steel, high-pressure, multistage centrifugal pumps

ForsupplyoffireextinguishingwaterfromfirehosereelsinaccordancewithDIN 14462from04/2009

100 m3/h

159 m

ƒ Mainsconnection3~400V,50 Hz ƒ Max.fluidtemperature50 °C ƒ Max.operatingpressure16 bar ƒ Inlet pressure 6 bar ƒ Protection class IP 54




ƒ Non-return valve, on the pressure side ƒ Diaphragm pressure vessel 8 l, PN 16, on pressure side

ƒ Pressure switch, on the discharge side

ƒ Compact system in accordance of DIN 14462

ƒ Variants ƒ Single-pump system ƒ Double-pump system with redundant single-pump systems in a base frame

ƒ Comes as standard with pump pro-tection by means of minimum volume discharge via bypass circuit without auxiliary energy

Fire fighting systems for wall hydrant installations according to DIN 14462

Wilo-FLA Compact

Firefighting

20 2510 1550 Q/m³/h0

H/m

20406080

120100

140160

Wilo-FLA CompactHelix V

Pressureboostingsystemforfirefightingapplications with 1 to 2 autonomously operating, non self-priming, stainless steel, high-pressure, multistage centrifu-gal pumps with break tank

Forsupplyoffire-fightingwaterfromfirehose reels in accordance withDIN14462from04/2009

30 m3/h

142 m

ƒ Mainsconnection3~400V,50 Hz ƒ Fluidtemperaturemax.50 °C ƒ Operatingpressureupto16bar ƒ Inlet pressure from break tank < 1 bar ƒ Protection class of operating device IP 54

ƒ Round break tank (540 l)

ƒ Componentsincontactwiththefluidare corrosion-resistant


ƒ Ball shut-off valve on pressure side ƒ Gate valve between pump and break tank with free outlet according to

ƒ EN 13077, type AB according to ƒ DIN EN 1717 ƒ Non-return valve, on pressure side ƒ Diaphragm pressure vessel 8 l, PN16, arranged on the pressure side

ƒ Pressure switch, on pressure side

ƒ Compact system with break tank in accordance with DIN 14462

ƒ Variants ƒ Single-pump system ƒ Double-pump system with two redundant single-pump systems on a base frame

ƒ Comes as standard with pump pro-tection by means of minimum volume discharge via bypass circuit without auxiliary energy

Fire fighting systems for sprinkler sys-tems according to EN 12845

Wilo-SiFire ENWilo-SiFire Easy

Firefighting

400 500 600200 3001000 Q/m³/h0

H/m

20

40

60

80

120

100

Wilo-SiFire

Pressure boosting system for the supply offire-fightingwaterwith1or2pumpsonhorizontalbaseframe–EN733–with spacer coupling, electro- or diesel motor and a multistage, electrical, verti-cal jockey pumpFully automatic water supply of fire-fightingsystemswithsprinklersys-tem in accordance with EN 12845

750 m3/h

128 m

ƒ Mainsconnection3~400V,50 Hz(1~230V,50 Hzpaneldieselpump)

ƒ Fluidtemperaturemax.+40 °C ƒ Max. operating pressure 10 bar or 16 bar

ƒ Max. inlet pressure 6 bar ƒ Protection class of the switch cabinet IP54

ƒ A circuit with double pressure switch, pressure gauge, non-return valve, valve for the main and standby pump for an automatic start

ƒ Pipeworkinsteel;paintedwithepoxyresin.Distributorwithflanges

ƒ Shutting gate with safety lock on the pressure side of the pump

ƒ Non-return valve on the pressure side of every pump

ƒ DN2" connection for the break tank of the pumps

ƒ Pressure measuring on pressure side

ƒ Compact system (just one base frame) in accordance with EN 12845

ƒ Jockey pump for maintaining the requiredpressureinthesystem;withautomatic start/stop function

ƒ Sizeddiaphragmatthepumpoutletfor a minimum bypass line so that the pump is protected at a low volume flow

ƒ The cables are hidden in the con-struction and are thus protected from shocks or cuts

Series modification


Water supply40 41

Wat

er s

uppl

y

Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart

Certified fire fighting systems for hy-drant and sprinkler systems according to EN 1717, EN 12056, DIN 14462 or EN 12845Wilo-GEP Fire

Firefighting

Wilo-GEP Fire

0 200 400 600 800 1000 Q/m³/h

150

100

200

250

50

0

H/m

Pressureboostingsystemforfirefightingapplications with 1 to 12 multistage cen-trifugal pumps with/without break tank, with/without housing

Fire-fightingwaterwithexteriorhydrantsandfirehosereelsparticularlyforhigh-rise buildings and large properties - with-out using valves for pressure reduction - for sprinkler and water spray systems

certifiedupto1000 m3/h

250 m, up to 450 m on request

ƒ Certifiedsystem-TÜV,DEKRA,DVGW,SVGW

ƒ Hygienic safety due to free outlet (EN 1717)

ƒ Stainless steel run-down tank ƒ Automatic function test up to redun-dancy stage 3

ƒ Smallinstallationsurfacemin.0.64 m²

ƒ Drainage or pump emergency drainage (EN12056)fortotalvolumeflow

ƒ Installationpossiblebelowbackflowlevel

ƒ No valves for reducing pressure in the mainflowofthefireextinguishingsystem

ƒ Effective maintenance management and permanent information on the operation via smartphone, tablet or PC

ƒ Room air cooling ƒ Split version for installation/transport ƒ Pressure maintaining pump or pilot pump as an option

ƒ Combination with industrial water system

ƒ Real pressure method and VR control-ler for high-rise buildings and large properties

ƒ Monitoring of the switchgear and the equipment environment temperature

ƒ Complete unit casing

Submersible pumps

Wilo-Sub TWU 3Wilo-Sub TWU 3-...-HS

Rainwater utilisation, raw water intake

053 4210

20

40

60

80

100

TWU 3TWU 3..HS


Water supply: boreholes, wells and rainwatertanks;domesticwatersupply,sprinklingandirrigation;pumpingofwaterwithoutlong-fibreorabrasivecomponents

6.5 m3/h

130 m

ƒ Mainsconnection:1~230V,50 Hzor3~400V,50 Hz

ƒ Fluidtemperature:3-35 °C ƒ Minimumflowrateatmotor:0.08 m/s ƒ Max. sand content: 50 g/m³ ƒ Max. number of starts: 30/h ƒ Max. immersion depth: 150 m ƒ Pressure connection: Rp 1

ƒ Multistage submersible pump with radial impellers

ƒ Integrated non-return valve ƒ NEMA coupling ƒ Single-phase or three-phase AC motor ƒ Thermal motor protection for ƒ single-phase motor ƒ HS variant including external or inter-nal frequency converter


ƒ Integrated non-return valve ƒ Supply security with constant pressure thanks to extended pump performance due to a higher speed of up to 8,400 rpm (TWU 3/HS)

ƒ Frequency converter with integrated and menu-guided control

ƒ (TWU 3/HS)

Submersible pumps

Wilo-Sub TWU 4 …Wilo-Sub TWU 4 …-QCWilo-Sub TWU 4 ...-GT


40

80

120

160

200

240

280

01053 421 14


Water supply: boreholes, wells, rainwater tanks;sprinkling,irrigation,pressureboosting;loweringgroundwaterlevel;pumpingofwaterwithoutlong-fibreorabrasive components

22 m3/h

322 m

ƒ Mainsconnection:1~230 V,50 Hzor3~400 V,50 Hz

ƒ Fluidtemperature:3-30 °C ƒ Minimumflowrateatmotor:0.08 m/s ƒ Max.sandcontent:50 g/m³ ƒ Up to 20 starts per hour ƒ Max.immersiondepth:200 m ƒ MEI:upto≥0.7


ƒ Integrated non-return valve ƒ NEMA coupling ƒ Single-phase or three-phase AC motor ƒ Integrated thermal motor protection for single-phase motor

ƒ Hermetically sealed motors


ƒ Integrated non-return valve ƒ Lowwearduetofloatingimpellers ƒ Maintenance-friendly motor


Water supply40 41

Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart

Submersible pumps

Wilo-ActunOPTI-MS


Q/m³/h

0

4

2

6

8

10

12

0 400 800 1200 2000 2400 28001600 P1/kW

Wilo-Actun OPTI-MS


Water supply: boreholes, wells, rainwater tanks;sprinkling,irrigation;pumpingofwaterwithoutlong-fibreorabrasivecomponents

11 m3/h

230 m

ƒ Operatingvoltagerange:90-400VDCor90-265VAC

ƒ Fluidtemperaturemax.:35 °C ƒ Minimumflowrateatmotor:0.2 m/s ƒ Max.sandcontent:50 g/m³ ƒ Max.immersiondepth:150 m

ƒ Type MSI: Multistage submersible pump with radial impellers in jacket design

ƒ Type MSH: Hydraulics with helical rotor within double helix rubber stator

ƒ Integrated non-return valve ƒ AC permanent magnet motor, capsu-lated, water-cooled

ƒ Powered by renewable energy sources ƒ Allpartsincontactwiththefluidaremade of stainless steel

ƒ Integrated non-return valve ƒ Lowwearduetofloatingimpellers ƒ Types with helical rotor for high head at low speed

ƒ AC permanent magnet motor ƒ Built-in inverter module with MPPT function

Submersible pump system

Wilo-Sub TWU 3 … Plug & PumpWilo-Sub TWU 4 … Plug & Pump


0 1 2 3 4 50

20

40

60

80

Water-supply unit with submersible pump, control and complete accessories

Water supply system for water supply from boreholes, wells and rainwater tanks;domesticwatersupply,sprinklingandirrigation;pumpingofwaterwithoutlong-fibreorabrasivecomponents

6 m3/h

88 m

ƒ Mainsconnection:1~230 V,50 Hz ƒ Fluidtemperature:3-30 °C ƒ Minimumflowrateatmotor:0.08 m/s ƒ Max.sandcontent:50 g/m³ ƒ Up to 20 starts per hour ƒ Max. immersion depth TWU 3/TWU 4: 150/200 m

ƒ MEI:≥0.7(TWU4)

ƒ Multistage submersible pump with radial impellers

ƒ Integrated non-return valve ƒ NEMA coupling ƒ Single-phase AC motor ƒ Integrated thermal motor protection ƒ Dry-running protection (only for TWU 4- … -P&P with Wilo-Sub-I package)

ƒ Easy installation thanks to pre-mount-ed and pre-wired components


ƒ Integrated non-return valve

Submersible pumps

Wilo-Sub TWI 4/6/8/10 …

Water supply/pressure boosting, clean water treatment, rainwater utilisation, raw water intake, desalination, irrigation

20 20010510

400

120

200

280

360

440


Water supply (also drinking water): bore-holes,rainwatertanks;municipal/industrial;sprinkling,irrigation;pressureboosting;loweringgroundwater;pumpingofwaterwithoutlong-fibreorabrasivecomponents

165 m3/h

500 m

ƒ Mains:1~230 V,50 Hz ƒ (onlyTWI4…)or3~400 V,50 Hz ƒ Immersed operating mode: S1 ƒ Fluidtemperature:3-20 °Cor3-30 °C ƒ Min.flowrateatmotor:0.08-0.5 m/s ƒ Max.sandcontent:50 g/m³ ƒ Up to 10 or 20 starts per hour ƒ Max.immersiondepth:100-350 m


ƒ Integrated non-return valve ƒ NEMA coupling ƒ Single-phase or three-phase ƒ AC motor

ƒ Corrosion-resistant thanks to stainless steel version

ƒ Flexible installation thanks to vertical andhorizontalinstallation

ƒ Easy installation due to integrated non-return valve

ƒ Large performance range ƒ ACS approval for TWI 4 for drinking water application

NEW


Water supply42 43

Wat

er s

uppl

y

Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart

Submersible pumps

Series MMI 50 V

Industrial process

10 15 20 2550 Q/m³/h0

H/m

80

40

160

120

Wilo-MMI 50 V

Multistage submersible pump

Pumping clean/slightly contaminated water (industrial process or clean water treatment), for small installation spaces. Installation in tanks, vessels, rainwater storage tanks and chambers

30 m3/h

180 m

ƒ Permittedtemperaturerange-20 °Cto+120 °C

ƒ Nominal diameter on pressure side DN 32toDN 100

ƒ Max.operatingpressurePN 10orPN 16

ƒ Mainsconnection3~400V,50 Hz ƒ Max. viscosity 150 cSt

ƒ VCS:adjustablebaseandfixedcou-pling

ƒ VEM:castironsupportandfixedcoupling

ƒ VTM: bearing block and semi-elastic coupling

ƒ VTMRI: bearing block and semi-elastic coupling with internal drain (shaft seal) for small installation spaces

ƒ VRI:castironsupport,fixedcouplingand internal drain (shaft seal) for small installation spaces

ƒ Low maintenance ƒ No mechanical seal ƒ Noise-free suction ƒ Replaceable IEC standard motor ƒ VTM with semi-elastic coupling ƒ VTMRI/VRI: internal seal for pressure side and mechanical seal

ƒ Allpartsincontactwithfluidaremadeof stainless steel

ƒ For high-pressure applications

Sprinkler pumps with VdS approval

Wilo-EMU sprinkler pumps

Firefighting

020406080

100120

30 50 70 100 200 300

Submersible pump with sectional con-struction

Supplying sprinkler systems

580 m3/h

140 m

ƒ Mainsconnection:3~400V/50 Hz ƒ Max.fluidtemperature:25 °Coronrequest

ƒ Minimumflowrateatmotor:0.1 m/s ƒ Max.sandcontent:35 g/m³ ƒ Up to 10 starts per hour ƒ Max.immersiondepth:100 mor300 m

ƒ Multistage submersible pump ƒ Radial or semi-axial impellers ƒ NEMA coupling (depending on type) ƒ Three-phase motor for direct or star-delta start

ƒ Rewindable motors

ƒ VdScertification ƒ Sturdyversionincastironorbronze ƒ Pressure shroud in corrosion-resistant and hygienic stainless steel version with rubber bearing for minimising noise and vibrations

ƒ VdScertifiednon-returnvalveisavail-able as an accessory

Submersible pumps

Wilo-EMU 6" seriesWilo-EMU 8" seriesWilo-EMU 10"…24" seriesWilo-ActunZETOSWater supply/pressure boosting, clean water treatment, raw water intake, desal-ination, professional irrigation/agriculture

5 10 20 50 1000

80

160

240

320

400

480

1 2 3

Submersible pump with sectional con-struction

Potable and other water from boreholes, rainwatertanks;processwater;municipal/industrialwatersupply;sprinkling/irrigation;pressureboosting;loweringthegroundwaterlevel;geothermalandoffshoreapplications

2,400 m3/h

600 m

ƒ Mainsconnection:3~400 V,50 Hz ƒ Max.fluidtemperature:20...30 °C ƒ Minimumflowrateatmotor:0.1...0.5m/s ƒ Max. sand content: ƒ 35 g/m³or150 g/m³ ƒ Up to 10 starts per hour ƒ Max.immersiondepth:100/300/350 m ƒ MEI:upto≥0.7

ƒ Multistage submersible pump ƒ Radial or semi-axial impellers ƒ Hydraulics and motor freely ƒ configurableaccordingtopowerrequirements

ƒ Integrated non-return valve ƒ (depending on type) ƒ NEMA coupling or standardised ƒ connection ƒ Three-phase motor for direct or star-delta start

ƒ Pressure shroud in corrosion-resistant and hygienic stainless steel version

ƒ Hydraulic in stainless steel precision casting(ActunZETOS-K8)

ƒ Maintenance-friendly motors ƒ OptionallywithCeramCTcoatingforincreasingtheefficiency

ƒ OptionallywithACSapprovalfordrinking water application

NEW


Water supply42 43

Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart

Submersible pumps

Wilo-EMU polder pumps

Water supply/pressure boosting, clean water treatment, raw water intake, desal-ination, dewatering, industrial process

0

140120100

20406080

10 20 30 40 50 100 160Polder pump

Potable and process water from tanks orshallowbodiesofwater;municipal/industrialwatersupply;sprinkling,irri-gation;loweringthegroundwaterlevel;geothermal and offshore applications

1,200 m3/h

160 m

ƒ Mainsconnection:3~400 V,50 Hz ƒ Max.fluidtemperature:20 °C ƒ Minimumflowacrossoutsideshroud:not necessary

ƒ Max.sandcontent:35 g/m3

ƒ Up to 10 starts per hour ƒ Max.immersiondepth:300 m

ƒ Multistage submersible pump ƒ Semi-axial impellers ƒ Hydraulics and motor freely ƒ configurableaccordingtopowerrequirements

ƒ Three-phase motor for direct or star-delta start

ƒ Motors rewindable as standard

ƒ Deep water lowering thanks to self-cooling motors

ƒ Sturdyversionincastironorbronze ƒ Compact construction ƒ Maintenance-friendly, rewindable motors

ƒ OptionallywithCeramCTcoatingforincreasingtheefficiency

Vertical turbine pumps

Series VMF, CNE, VAF

Water supply/pressure boosting, indus-trial process

Vertical turbine pumps for dry well instal-lation with submerged axial or semi-axial hydraulics

Industrial or municipal water supplyirrigation,firefightingCooling water supplyDewatering,floodcontrol

40,000 m3/h

450 m

ƒ Permitted temperature range up to 80 °C,orupto105 °Conrequest


ƒ For types of installation with pressure port,forconcealedfloor,floor-mount-ed or twin-ceiling installation

ƒ Design: - As removable or permanent - installation - With axial or semi-axial, single or multistage hydraulics

- With open shaft for bearing lubrica-tionwiththefluid,orwithshafttrimfor separate bearing lubrication

ƒ Drive options: Electric motor, diesel motor or steam turbine

ƒ Minimum surface area needed ƒ Highhydraulicefficiency ƒ Submerged pump hydraulics ƒ Design to order as per customer specifications


Wilo-CronoNorm-NL


200 300 400100 5000 Q/m³/h0

H/m

20406080

140120100

Wilo-CronoNorm-NL

Single-stage low-pressure centrifugal pump with axial suction, according to EN 733andISO 5199,mountedonabaseplate


650 m3/h

150 m

ƒ Fluidtemperature-20 °Cto+120 °C ƒ Mainsconnection3~400V,50 Hz ƒ Minimumefficiencyindex(MEI)≥0.4 ƒ Nominaldiameter:DN 50toDN 500(suctionside),DN 32toDN 500(pressure side)


ƒ Single-stagehorizontalspiralhousingpump with bearing bracket and exchangeable casing wear rings in process design

ƒ Shaft sealing with mechanical seals in accordancewithEN 12756orstuffingbox packing

ƒ Spiral housing with cast pump support feet

ƒ Shaft coupling with spacer coupling ƒ MotorswithefficiencyclassIE3formotors≥0.75kW

ƒ Reduced life-cycle costs through optimisedefficiencylevels

ƒ Bidirectional,force-flushedmechan-ical seal

ƒ Low NPSH values, best cavitation properties

ƒ Shaft coupling with or without spacer coupling

no illustration


Water supply44 45

Wat

er s

uppl

y

Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart


Wilo-CronoNorm-NLGWilo-VeroNorm-NPG


200015005000 Q/m³/h0

H/m

20406080

140120100

1000

Wilo-VeroNorm-NPGWilo-CronoNorm-NLG

NPGNLG

Single-stage low-pressure centrifugal pump with axial suction, according to ISO 5199,mountedonabaseplate


2,800 m3/h

140 m

ƒ Fluidtemperature-20 °Cto+120 °C(depending on type)

ƒ Mainsconnection3~400V,50 Hz ƒ Minimumefficiencyindex(MEI)≥0.4 ƒ Nominaldiameters:DN 150toDN 500(depending on type)


ƒ Single-stagehorizontalspiralhousingpump with bearing bracket and exchangeable casing wear rings (NLG only) in process design

ƒ Shaft sealing with mechanical seals in accordancewithEN 12756orstuffingbox packing

ƒ Spiral housing with cast pump bases ƒ Greased grooved ball bearings for bearing of pump shaft


ƒ NLG: - Reduced life cycle costs through optimisedefficiency

- Bidirectional mechanical seal - Replaceable casing wear ring - Permanently lubricated, generously dimensioned roller bearings

ƒ NPG: - Suitable for temperatures up to 140 °C

- Back pull-out version

Axially split case pumps

Wilo-SCP

Cooling, air-conditioning, water supply/pressure boosting, industrial process

1000100 5005010 Q/m³/h4

H/m

10

50

100

200Wilo-SCP

Low-pressure centrifugal pump with axi-ally split housing mounted on a baseplate

Pumping of heating water in accordance withVDI 2035,water-glycolmixtures,cool-ing/cold water and process water, municipal water supply, irrigation, building services, general industry, power stations etc.

3,400 m3/h

245 m

ƒ Fluidtemperature-8 °Cto+120 °C ƒ Mainsconnection3~400V,50 Hz ƒ Protection class IP 55 ƒ Nominal diameters - Suction side: DN 65 to DN 500

ƒ Pressure side: DN 50 to DN 400 ƒ Max. operating pressure: ƒ 16or25 bar,dependingontype

ƒ 1- or 2-stage, low-pressure centrifu-gal pump in monobloc design

ƒ Deliverable as complete unit or with-out motor or only pump hydraulics

ƒ Shaft sealing with mechanical seal or stuffingboxpacking

ƒ 4-pole and 6-pole motors ƒ Materials:

- Pump housing: EN-GJL-250 - Impeller: G-CuSn5 ZnPb - Shaft: X12Cr13

ƒ Highervolumeflowsupto17,000 onrequest

ƒ Special motors and other materials on request

Standard pumps in accordancewith EN 733

SeriesNOLH

Industrial process

10 50 100 200052 Q/m³/h5002

5

H/m

10

150100

50

20

Wilo-NOLH

Single-stage low-pressure centrifugal pump with axial suction connection and radial, upwards-facing pressure con-nec-tion, mounted on a baseplate

Industrial process, non-hygienic food industry, power generation, water cir-culation in the metals industry, heating, cold water and cooling water systems

1,800 m3/h

140 m

ƒ Permittedtemperaturerange-20 °Cto+120 °C

ƒ Mainsconnection3~400V,50 Hz ƒ Nominal diameter on pressure side DN 32toDN 125

ƒ Max.operatingpressurePN 16

ƒ Dimensions and hydraulic output as perEN 733

ƒ Hydraulics made from cast iron (ML) or stainless steel (MX) depending on version

ƒ Sealed by uncooled mechanical seal ƒ Version with or without spacer cou-pling

ƒ 2or4-poleIEC standardmotor ƒ Baseplate made from steel or cast iron ƒ Supplied as a complete unit: with pump, coupling, coupling guard, motor and baseplate or without motor or pump only, with free shaft end

ƒ Impeller diameter is adjusted to the desired duty point

ƒ Many version options for the shaft seal ƒ 60 HzorATEXversiononrequest ƒ Pumping of clean or slightly muddy fluidswithoutsolidmaterial


Water supply44 45

Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart

Standard pumps in accordancewith EN 733 and EN 22858

Series NESDSeries NESE

Industrial process

10 50 100 50050 Q/m³/h0

5

H/m

10

100

50

20

Wilo-NESD / NESE

Single-stage low-pressure centrifugal pump with axial suction connection and radial, upwards-facing pressure connec-tion mounted on a baseplate

For heat transfer or circulating hot water in industrial processes, for power genera-tion or in building services

600 m3/h

90 m

ƒ Max.permittedfluidtemperature - NESD:207 °C - NESE:0 °C...120 °C(40bar),120 °C…200 °C(35bar),200 °C...230 °C(32bar)

ƒ Minimumfluidtemperature:170 °C ƒ Nominal-Øpressureside:DN 32 - 125 ƒ Max. operating pressure ƒ NESD:PN 25;NESE:PN 40


ƒ Hydraulics in spheroidal cast iron EN-GS400 (MG version)

ƒ Flange version in accordance with EN 1092-1

ƒ With or without spacer coupling ƒ 2or4-poleIEC standardmotor50 Hz ƒ Baseplate steel or cast iron ƒ Supplied as a complete unit: with pump, coupling, coupling guard, motor and baseplate or without motor or pump only, with free shaft end


ƒ 60 HzorATEXversiononrequest ƒ Special self-cooling design allows use of an uncooled shaft seal. Additional or external cooling devices are not required

Standard pumps in accordancewith EN 733

Series NFCH

Industrial process

10 50 100 50052 Q/m³/h2

5

H/m

10

100

50

20

Wilo-NFCH

Single-stage low-pressure centrifugal pump with axial suction connection and radial, upwards-facing pressure con-nec-tion, mounted on a baseplate

For pumping mineral or synthetic heat-carrierfluidsupto350 °C,e.g.:inindustrial processes or power generation

1,000 m3/h

90 m

ƒ Permittedtemperaturerange:0 °C...120 °C(16bar),120 °C…300 °C(13bar),300 °C...350 °C(16bar)


ƒ Max.operatingpressurePN 16


ƒ Standard mechanical seal correspond-ingtotheheat-carrierfluid

ƒ Version with or without spacer cou-pling

ƒ 2or4-poleIEC standardmotor50 Hz ƒ Supplied as a complete unit: with pump, coupling, coupling guard, motor and baseplate or without motor or pump only, with free shaft end


ƒ 60 HzorATEXversiononrequest ƒ Self-cooling design with double temperature barrier allows the use of an uncooled shaft seal and reduces heat loss

Self-priming drainage pumps

Wilo-Drain LPWilo-Drain LPC

Water supply/pressure boosting, profes-sional irrigation/agriculture, dewatering/floodcontrol

4020 5030100 Q/m³/h0

5

10

25

30

20

15

H/m Wilo-Drain LP / LPC

Self-priming drainage pumps for dry well installation

For pumping wastewater with small amounts of solid matter for excavation pits and ponds, sprinkling/spraying of gardens and green areas, drainage of seepage water and mobile drainage

60 m3/h

29 m

ƒ Mainsconnection:1~230 V,50 Hz,3~400 V,50 Hz

ƒ Fluidtemperature3 °Cto35 °C ƒ Freeballpassage5to12 mm, ƒ depending on type ƒ ConnectionRp 1½toG3

ƒ Portable self-priming centrifugal pump

ƒ Long service life ƒ Sturdy construction ƒ Easy operation ƒ Flexible use


Water supply46 47

Wat

er s

uppl

y

Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart

Pedestal pumps

Wilo-Drain VC

Professional irrigation/agriculture, special applications,dewatering/floodcontrol,industrial process

0 2 4 6 8 10 120

4

8

12

16

Vertical drainage pumps

Pumping of wastewater and condensate upto95 °Cfrompumpsumpsandfromcellarsatriskofflooding

14 m3/h

20 m

ƒ Mainsconnection:1~230 V,50 Hzor3~400 V,50 Hz

ƒ ProtectionclassIP 54 ƒ Fluidtemperature+5 °Cto+95 °C ƒ Freeballpassage5or7 mm, ƒ depending on type ƒ PressureportRp 1orRp 1½ ƒ depending on type

ƒ Attachedfloatswitch

ƒ Forfluidsupto95 °C ƒ Long service life ƒ Easyoperationwithattachedfloatswitch

ƒ Long standstill times possible ƒ Integrated motor protection with thermal relay

Submersible sewage pumps

Wilo-EMU KPR …

Raw water intake, wastewater treatment, dewatering/floodcontrol

500 1000 1500 20000

2

4

6

0

Axial submersible pump with dry motor for use in pipe chambers

Pumping cooling or rainwater, cleaned sewage and for irrigation and pumping sludge

9,500 m3/h

8.4 m

ƒ Mainsconnection:3~400 V,50 Hz ƒ Immersed operating mode: S1 ƒ Protectionclass:IP 68 ƒ Max.fluidtemperature:40 °C ƒ Freeballpassageof85to130 mm ƒ Short common pump/motor shaft ƒ Permanently lubricated roller bearings ƒ Max.immersiondepth:20 m

ƒ Heavy-duty version made of cast iron

ƒ Installation directly in the pressure pipe

ƒ Angle of propeller blades adjustable ƒ Process security thanks to extensive monitoring devices

ƒ Low vibrations and long standstill times thanks to high-quality compo-nents

Hot-water pressure-boosting pumps

Wilo-PB


42 310 Q/m³/h0

H/m

5

10

15

20

25Wilo-PB

Circulator

Domestic water supply from a water tank

4.8 m3/h

3 m

ƒ Mainsconnection:1~230V,50/60 Hz(depending models)

ƒ Fluidtemperaturefrom5°Cto+80°C(depending models)

ƒ Ambienttemperaturefrom0°Cto+40°C ƒ Max suction pressure: From 0.4 bars up to 1.4 bars

ƒ Protection class 1~: IP X4

ƒ Directlyflangedmotor ƒ Thermal motor protection switch for 1~230V version

ƒ Flow sensor for automatic pump start PB-…A

ƒ Flow sensor, pressure switch and pres-surised tank for automatic pump start and protection of versions PB-…S…A

ƒ Easy: …S…A versions for all in one water booster

ƒ Efficient:High-efficiencymotor(IE2orIE3 depending on versions)


Water supply46 47

VolumeflowQmax.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart

Horizontal centrifugal pumps

Wilo-PUN


Wilo-PUN

4,82,4 3,61,20 Q/m³/h0

H/m

5

10

15

20

25

Small jet and block pumps

Water supply from a water tankSprinkling from a water tankIrrigation and spraying from a water tankRainwater utilisation from a water tank

5.8 m3/h

22 m

ƒ Mainsconnection1~230V,50/60 Hz(depending models)

ƒ Fluidtemperaturefrom+0°Cto+60°C ƒ Ambienttemperaturefrom0°Cto+40°C

ƒ Max suction pressure: From 1.0 bar up to 1.4 bar



ƒ Easy: PU-S… versions for salt water ƒ Efficient:Self-primingautomaticperipheral pumps up to 8m

ƒ Efficient:High-efficiencymotor(IE2orIE3 depending on versions)

Peripheral pumps

Wilo-PW

Water supply

4,82,4 3,61,20 Q/m³/h0

H/m

10203040

506070

Wilo-PW

PW-750 EPW-252 EA

PW-175 EPW-175 EA

Peripheral pump

Water supply from a water tankSprinkling from a water tankIrrigation and spraying from a water tankRainwater utilisation from a water tank

2.4 m3/h

35 m

ƒ Mainsconnection1~230V,50/60 Hz(depending models)

ƒ Fluidtemperaturefrom+5°Cto+40°C ƒ Ambienttemperaturefrom0°Cto+40°C

ƒ Max suction pressure: From 0.7 bar up to 1.4 bar



ƒ Pressure switch and pressurised tank for automatic pump start PW-…S…A

ƒ Easy: S…A versions for all in one water booster

ƒ Efficient:Self-primingautomaticperipheral pumps up to 8m

ƒ Efficient:Highefficiencymotor(IE2orIE3 depending on versions)


Water supply48

WILO BRINGS THE FUTURE.

Water management worldwide faces complex tasks. Scarcity of resources and urbani-sation require efficient systems to reliably transport and treat water. The key question is: what might the sustainable, effective water infrastructure of tomorrow look like? We donothavejusttheoneanswer,butawholerange –eachindividuallytailoredtoeachproject. As a solutions provider we assist our customers in a holistic manner, from plan-ning to maintenance and support them with intelligent networking during digitisation.

For more information visit www.wilo.com

Ground-breaking solutions for an ever more complex world.

Wat

er s

uppl

y

Drainage and sewage50

PUMPS AND SYSTEMS FOR WASTEWATER COLLECTION AND TRANSPORT, SEWAGE TREATMENT, DRAINAGE AND FLOOD CONTROL.

RELIABLE WASTEWATER SYSTEMS FOR GROWING CITIES.

51

MODULAR WATER INFRASTRUCTURE Nowhere are intelligent technology concepts so ur-gently necessary as in the rapidly growing metropolises of Latin America, Africa and Asia. In cooperation with TU Darmstadt,Wiloisworkingtodevelopaflexibleinfrastructure approach as part of the research project “Semizentral”.Semizentralgrowswithcitiesandintegratessewage and organic waste streams into a modular solution concept.AtthepilotplantinQingdao,China,56 ofourhigh-tech pumps are in operation. They help to generate industrial water and energy from sewage and organic waste. The highly energy-efficient submersible mixers and pumps as well as pressure-boosting and fire-extinguishing systems enable the energy self-sufficient operation of the system.

POWER AND RELIABILITYThe efficient lifting units and sewage pumps from Wilo are suitable for a wide variety of construction settings, from rental, administrative and commercial buildings to waste-water treatment plants, pumps stations and collective pumping stations.

Moreandmorepeopleliveincitiesandthesehabitatsofthefutureposeusmajorchallenges.Oneofthesechallengesis the disposal of wastewater and sewage to comply with hygiene standards and prevent unpleasant odours. Wherever sewage does not simply flow into the sewer system via gravity, efficient sewage pumps and lifting units come into play. The powerful and particularly economical products and systems from Wilo collect and transport sewage reliably and in a resource-friendly way. And with the development of effective solutions for sewage treatment, we help protect the environmentandcontributetosustainableuseofwater –oneoflife’smostvaluableresources.

RELIABLE WASTEWATER SYSTEMS FOR GROWING CITIES.

Please click “Play” and discover Wilo-EMUport CORE, our solids separation system with maximum operational reliability.

Drai

nage

and

sew

age

https://wilo.cdn.mediamid.com/resources/video/video_embed.html?url=/cdnvid/wilo56759/434633/wilo56759_434633_playlistsz.js&autostart=false&defaultquality=1&skin=skin&primary=html5

Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart

Self-priming drainage pumps

Wilo-Drain LPWilo-Drain LPC

Water distribution/boosting, dewatering/floodcontrol

4020 5030100 Q/m³/h0

5

10

25

30

20

15

H/m Wilo-Drain LP / LPC

Non-submersible self-priming drainage pump

Pumping of ƒ Wastewater ƒ Process water

60 m3/h

29 m

ƒ Mainsconnection:1~230 Vor3~400 V ƒ Fluidtemperature:max.35 °C ƒ Operationmode:S1

ƒ Portable self-priming centrifugal pump

ƒ Long service life ƒ Sturdy construction ƒ Easy operation ƒ Flexible use

Submersible drainage pumps

Wilo-Drain TMT

Dewatering/floodcontrol,industrialprocess

0 8 124 16 200

468

2

10121416

Submersible drainage pump

Pumping of ƒ Wastewater ƒ Industrial wastewater

22 m3/h

15.5 m

ƒ Mainsconnection:3~400 V ƒ Immersed operating mode: S1 ƒ Non-immersed operating mode: S3 25 %

ƒ Protectionclass:IP 68 ƒ Max.immersiondepth:7 m ƒ Fluidtemperature:max.95 °C

ƒ Housing and impeller made of grey cast iron

ƒ Thermal motor monitoring

ƒ Forfluidsupto95°C ƒ Sealed cable inlet

Pedestal pumps

Wilo-Drain VC


0 2 4 6 8 10 120

4

8

12

16

Non-submersible pedestal pump with standard motor

Pumping of ƒ Wastewater ƒ Industrial wastewater

14 m3/h

20 m

ƒ Mainsconnection:1~230 Vor3~400 V ƒ Operationmode:S1 ƒ Protectionclass:IP 54 ƒ Fluidtemperature:max.95 °C

ƒ Attachedfloatswitch

ƒ Forfluidsupto95°C ƒ Long service life ƒ Easy operation thanks to attached floatswitch

ƒ Long standstill times possible ƒ Integrated motor protection with thermal relay


Drainage and sewage52 53

Drai

nage

and

sew

age

Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart


Wilo-Drain TM/TMW/TMR 32Wilo-Drain TS/TSW 32

Wastewater collection and transport, dewatering/floodcontrol

42 8 10 1260 Q/m³/h0

4

6

8

2

10H/m Wilo-Drain TS / TSW

TM / TMR / TMW


Pumping of ƒ Pre-cleaned sewage without faeces andlong-fibrecomponents

ƒ Wastewater

16 m3/h

12 m

ƒ Mainsconnection:1~230 V,50 Hz ƒ ProtectionclassIP 68 ƒ Max. immersion depth TM/TMW/TMR =1 m,TS/TSW=7m

ƒ Fluidtemperature3 °Cto35 °C, ƒ for short periods up to 3 min. ƒ max.90 °C

ƒ Motor monitoring via temperature ƒ Sheathflowcooling ƒ Hose connection ƒ Turbulator (TMW, TSW) ƒ Float switch (depending on type)

ƒ TMW, TSW with turbulator for ƒ constantly clean pump chamber ƒ Nogenerationoffluid-relatedodours ƒ Easy installation ƒ High operational reliability ƒ Easy operation


Wilo-Drain TS 40


4

0

8

1210

6

2

14

0 4 8 122 6 10 14


Pumping of ƒ Pre-cleaned sewage without faeces andlong-fibrecomponents

ƒ Wastewater

18 m3/h

14 m

ƒ Mainsconnection:1~230 Vor3~400 V ƒ Immersed operating mode: S1 ƒ Non-immersed operating mode: S3 25 %

ƒ Protectionclass:IP 68 ƒ Immersion depth: 5 m ƒ Fluidtemperature:max.35 °C

ƒ Ready-to-plugversionsalsowithfloatswitch

ƒ Thermal motor monitoring ƒ Integrated non-return valve ƒ Hose connection

ƒ Low weight ƒ Sealing chamber ƒ Easy operation thanks to attached floatswitchandplug(Aversion)


Wilo-Padus UNI


0

5

0 6 82 4 Q/l/s

10

15

20

25H/m Wilo-Padus UNI

1210


Pumping of ƒ Pre-cleaned sewage without faeces andlong-fibrecomponents(EN12050-2)

ƒ Wastewater

46 m3/h

24,5 m

ƒ Mainsconnection:1~230 Vor3~400 V ƒ Immersed operating mode: S1 ƒ Non-immersed operating mode: S2-15,S310 %

ƒ Protectionclass:IP 68 ƒ Immersion depth: 7 m ƒ Fluidtemperature:max.40 °C

ƒ Single-phase variant with internal capacitor

ƒ A-modelwithplugandfloatswitch ƒ VA-modelwithplugandverticalfloatswitch

ƒ P-model with plug ƒ Thermal motor monitoring

ƒ Outstandingreliability,thankstocorrosion-free hydraulics for universal applicationsandvariousfluids

ƒ Easy installation due to its low weight andthreadedflange

ƒ Quick maintenance facilitated by direct access to the pump housing

ƒ Long maintenance intervals thanks to the double mechanical seal and large-volume sealing chamber

NEW



Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart


Wilo-EMU KS


0 50 100 1500

10

20

30

40


Pumping of ƒ Wastewater

165 m3/h

62 m

ƒ Mains connection: 1~230 V or 3~400 V ƒ Immersed operating mode: S1 ƒ Non-immersed operating mode: S1 ƒ Fluidtemperature:max.40 °C ƒ Protectionclass:IP 68 ƒ Immersion depth: 20 m

ƒ Heavy-duty design ƒ Slurping operation

ƒ Long service life ƒ Sturdy construction ƒ Slurping operation possible ƒ Suitable for continuous duty (S1) ƒ Ready-to-plug


Wilo-PadusPRO


00 50 7525 Q/m3/h

10

20

30

H/m Wilo-Padus PRO


Pumping of ƒ Wastewater

85 m3/h

31 m

ƒ Mains connection: 1~230 V or 3~400 V ƒ Immersed operating mode: S1 ƒ Non-immersed operating mode: S1 ƒ Fluidtemperature:max.40 °C ƒ Protectionclass:IP 68 ƒ Immersion depth: 20 m

ƒ Sheathflowcooling ƒ Slurping operation

ƒ High reliability in abrasive media thanks to rubber-coated hydraulics and impeller made of hardened chrome steel

ƒ Easy installation thanks to low weight andflexiblepressureconnection(ver-tical/horizontal)

ƒ Active cooling for reliable continuous duty, particularly in slurping operation

ƒ Easy maintenance thanks to quick access to wearing parts

ƒ Equippedwithenergy-efficientIE3motor technology as standard


Wilo-Rexa CUT

Wastewater collection and transport

0 84 12 16048

121620242832

Submersible sewage pump with mac-erator

Pumping of ƒ Sewage containing faeces ((DIN) EN 12050-1)

ƒ Wastewater

21 m3/h

41 m

ƒ Mainsconnection:1~230 Vor3~400 V ƒ Immersed operating mode: S1 ƒ Non-immersed operating mode: S2 or S3

ƒ Protectionclass:IP 68 ƒ Fluidtemperature:max.40 °C ƒ Immersion depth: 7 or 20 m

ƒ Internal or external macerator ƒ Unimpededflowtotheimpeller ƒ Maceration of substances being conveyed

ƒ Sealing chamber with optional external monitoring

ƒ ATEX approval (Rexa CUT GE)

ƒ Low-weight version with stainless steel motor

ƒ Sturdy version in cast iron ƒ Sealing with two mechanical seals ƒ Longitudinal watertight cable inlet

NEWSmart solution: This product is connectable to pressure drainage systems with Nexos Intelligence.



Drai

nage

and

sew

age

Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart


Wilo-Drain TC 40


8 10 12 144 620 Q/m³/h0

H/m

2

4

6

8

12

10

Wilo-Drain TC 40

Submersible sewage pump


ƒ Wastewater

22 m3/h

10 m

ƒ Mainsconnection:1~230 V ƒ Immersed operating mode: S1 ƒ Non-immersed operating mode: S3 25 %

ƒ Protectionclass:IP 68 ƒ Fluidtemperature:max.40 °C ƒ Max. immersion depth: 2 m

ƒ Ready-to-plug ƒ Includingfloatswitch ƒ Thermal motor monitoring

ƒ Heavy-duty hydraulic housing made of cast iron

ƒ Easy operation due to the attached floatswitch

ƒ Integrated stainless steel pump sup-port foot for easy installation

ƒ Freeballpassage:40 mm


Wilo-Drain STS 40


42 8 10 14 161260 Q/m³/h0

4

6

8

2

10H/m Wilo-Drain STS 40



ƒ Wastewater

20 m3/h

10 m

ƒ Mainsconnection:1~230 Vor3~400 V ƒ Immersed operating mode: S1 ƒ Non-immersed operating mode: S3 25 %


ƒ AC variant ready-to-plug ƒ A-modelincludingfloatswitch ƒ Thermal motor monitoring

ƒ Connection cable detachable ƒ Stainless steel surface-cooled motor ƒ Attachedfloatswitch(A-model)ena-bles easy operation

ƒ Integrated pump support foot for easy installation

ƒ Freeballpassage:40 mm ƒ No switchgear required for thermal fuse protection

ƒ Integrated thermal motor protection (1~/3~) and phase failure protection (3~)


Wilo-Rexa UNI


0 20 30 40100

4

8

1216

20

24


Pumping of ƒ Sewage containing faeces (EN 12050-1)

ƒ Wastewater

54 m3/h

23.5 m

ƒ Mainsconnection:1~230 Vor3~400 V ƒ Immersed operating mode: S1 ƒ Non-immersed operating mode: S2-15 min,S310 %


ƒ AC variant with internal capacitor ƒ A-modelwithplugandfloatswitch ƒ P-model with plug ƒ Thermal motor monitoring

ƒ High reliability due to corrosion-free hydraulics for universal applications andvariousfluids

ƒ Easy installation thanks to low weight of composite, integrated capacitor in single-phase motor and integrated fixationsinflanges

ƒ Quick maintenance by direct access to sealing chamber and to pump housing

ƒ Larger inspection interval thanks to double sealing with large sealing chamber



Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart


Wilo-Drain TP 80Wilo-Drain TP 100

Wastewater collection and transport, de-watering/floodcontrol,industrialprocess

0 20 40 60 80 100 120 1401600

4

8

12

16

20


Pumping of ƒ Sewage containing faeces (DIN EN 12050-1)

ƒ Process water ƒ Wastewater

180 m3/h

21 m

ƒ Mainsconnection:3~400 V ƒ Immersed operating mode: S1 ƒ Non-immersed operating mode: S1 ƒ Protectionclass:IP 68 ƒ Fluidtemperature:max.40 °C ƒ Max.immersiondepth:20 m

ƒ Thermal motor monitoring ƒ Motor chamber monitoring ƒ ATEX approval ƒ Sheathflowcooling

ƒ Self-cooling motor for the use in wet well and dry well installations

ƒ Corrosion-resistant stainless steel motor housing in 1.4404

ƒ Patented non-clogging hydraulics ƒ Longitudinal watertight cable inlet ƒ Low weight


Wilo-Rexa FITWilo-RexaPRO

Wastewater collection and transport, wastewatertreatment,dewatering/floodcontrol

0 40 60 10020 80 120140 180160048

1216202428


Pumping of ƒ Sewage containing faeces ((DIN) EN 12050-1)

ƒ Wastewater

186 m3/h

32 m

ƒ Mains connection: 1~230 V or 3~400 V ƒ Immersed operating mode: S1 ƒ Non-immersed operating mode: S1, S2 or S3 (depending from motor type)

ƒ Protection class: IP 68 ƒ Fluidtemperature:max.40 °C ƒ Max. immersion depth: 7 or 20 m

ƒ Thermal motor monitoring ƒ Motorchambermonitoring(RexaPRO) ƒ Sealing chamber with optional external monitoring

ƒ ATEXapproval(RexaPRO)

ƒ Low-weight version with stainless steel motor or sturdy version in cast iron

ƒ Also with IE3 motor technology ƒ (on the basis of IEC 60034-30)

Sewage pumps

Wilo-RexaBloc RE


0 80 160 240 320048

1216202428

DN 80

DN 100

DN 150

Non submersible sewage pump in mon-obloc design

Pumping of ƒ Sewage containing faeces (EN 12050-1) ƒ Pre-cleaned sewage without faeces andlong-fibrecomponents

ƒ Wastewater

440 m3/h

26 m

ƒ Mainsconnection:3~400 V ƒ Operatingmode:S1 ƒ Protectionclass:IP 55 ƒ Fluidtemperature:max.70 °C ƒ Ambienttemperature:max.40 °C ƒ Motorefficiencyclass:IE3,IE4

ƒ Optionalexternalsealingchambermonitoring

ƒ Highreliabilityduetooil-filledsealingchamber and additional leakage chamber

ƒ Easy impeller replacement due to “back pull-out” design. This means the motor and the impeller can be removed without needing to dismantle the hydraulics

ƒ Closed bearing bracket design. This means that no oil needs to be drained during dismantling



Drai

nage

and

sew

age

Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart

Sewage pumps

Wilo-RexaNorm RE

Wastewater collection and transport, wastewatertreatment,dewatering/floodcontrol, industrial process

0 400 600 800 1000 1200200048

12162024283236

Non submersible sewage pump with standard motor, fully mounted on baseplate

Pumping of ƒ Untreated sewage with faeces and long-fibrecomponents

ƒ Sewage containing faeces (EN 12050-1) ƒ Process water, Wastewater

1150 m3/h

33 m

ƒ Mainsconnection:3~400 V ƒ Operatingmode:S1 ƒ Protectionclass:IP 55 ƒ Fluidtemperature:max.70 °C ƒ Ambienttemperature:max.40 °C ƒ Motorefficiencyclass:IE3,IE4

ƒ Optionalthermalmotormonitoring ƒ Optionalexternalsealingchambermonitoring

ƒ Easy impeller replacement due to “back pull-out” design and spacer coupling as standard. This makes it possible to uninstall the impeller without dismantling the hydraulics from the pipeline and the motor from the baseplate

ƒ Shut “Back pull-out” unit: Dismantling without draining the oil in the sealing chamber


Wilo-EMU FA 08 … to FA 15 … (standard pumps)


0 50 100 150 200 250 300

8

16

24

0

40

32

48


Pumping of ƒ Sewage containing faeces ((DIN) EN 12050-1) ƒ Pre-cleaned sewage without faeces andlong-fibrecomponents

ƒ Wastewater

380 m3/h

51 m

ƒ Mainsconnection:3~400 V ƒ Immersed operating mode: S1 ƒ Non-immersed operating mode: S2-15 or S2-30

ƒ Protectionclass:IP 68 ƒ Fluidtemperature:max.40 °C ƒ Max.immersiondepth:20 m


ƒ OperationallyreliablethankstoVortexhydraulics and single-channel hydrau-lics with large, free ball passage

ƒ Process reliability thanks to optional monitoring for the sealing chamber


Wilo-EMU FA 08 … to FA 60 …


1 101

102040

500100Submersible sewage pump


ƒ Sewage containing faeces ((DIN) EN 12050-1) ƒ Process water, wastewater

7,840 m3/h

100 m

ƒ Mainsconnection:3~400 V ƒ Immersed operating mode: S1 ƒ Non-immersed operating mode: S1 with self-cooling motor, S2 with sur-face-cooled motors


ƒ Heavy-duty version made of cast iron ƒ Optionalmonitoringformotorbearingtemperature, motor winding tempera-ture and tightness of motor, terminals and sealing chamber

ƒ Self-cooling motors for the use in wet well and dry well installation

ƒ Process security thanks to extensive monitoring devices

ƒ Special versions for abrasive and corrosivefluids

ƒ Low vibrations and long service life thanks to high-quality components

ƒ Customised versions are possible



Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart


Wilo-RexaSOLID


0

10

20

30

40

0 20 40 60 80 100

H/m

Q/l/s

Wilo-Rexa SOLID



ƒ Sewage containing faeces ((DIN) EN 12050-1) ƒ Process water, wastewater

396m³/h

40 m

ƒ Mainsconnection:3~400 V ƒ Immersed operating mode: S1 ƒ Non-immersed operating mode: S1 with self-cooling motor, S2 with sur-face-cooled motors


ƒ OptionalNexosIntelligence: - Reduced downtime and service call-outs thanks to automatic detection and removal of clogging

- Lower energy costs due to the integrat-ed automatic control for the optimal operatingmodeofthespecificsystem

- Convenient control and connectiv-ity with the local network via the integrated web server and Ethernet interface with established protocols in the pump

- Increased operational reliability in the event of a failure thanks to the integrated pump control in multiple execution

ƒ Highest operational reliability and reduced service costs, especially for pumping untreated sewage thanks to the self-cleaning characteristics

ƒ Corrosion protection with the optional Ceram coating for a long service life in aggressive media

ƒ OptionalDigitalDataInterface(DDI)with integrated vibration monitor, data logger, web server and digital rating plate for convenient monitoring and system integration

ƒ Integration of Nexos Intelligence


Wilo-EMU FA…RF

Wastewater collection and transport, industrial process

1 2 3 41

5

10

20

40

10 155Submersible sewage pump made of cast stainless steel

Pumping of highly abrasive sewage containing faeces (EN 12050-1) without long-fibrecomponents

70 m3/h

30 m



ƒ Sturdy version completely in stainless steel casting 1.4581 for the use in corrosivefluids

ƒ Longitudinal watertight cable inlet ƒ Low vibrations and long service life thanks to high-quality components


Wilo-EMU FA…WR

Wastewater collection and transport, wastewater treatment

00 20 40 60 80 100

10

20

30

40

50

Submersible sewage pump with mechan-ical stirring apparatus

Pumping of highly abrasive and fae-ces-containing sewage (EN 12050-1) withoutlong-fibrecomponents

466 m3/h

36 m


ƒ Heavy-duty version made of cast iron ƒ Mechanical stirring apparatus is fas-tened directly to the impeller

ƒ Mixer head made of Abrasit (chilled cast iron)


ƒ Mechanical mixing device made of Abrasit material to avoid deposits in the pump chamber



NEWSmart solution: Sewage pump with built-in Nexos Intelligence.



Drai

nage

and

sew

age

Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart


Wilo-EMU KPR …

Raw water intake, wastewater treatment, dewatering/floodcontrol

500 1000 1500 20000

2

4

6

0

Axial submersible pump for use in pipe chambers

Pumping of ƒ Pre-cleaned sewage without faeces and long-fibrecomponents(EN12050-2)

ƒ Process water ƒ Wastewater

9,500 m3/h

8.4 m

ƒ Mainsconnection:3~400 V ƒ Immersed operating mode: S1 ƒ Protectionclass:IP 68 ƒ Fluidtemperature:max.40 °C ƒ Max.immersiondepth:20 m

ƒ Heavy-duty version made of cast iron

ƒ Installation directly in the pressure pipe

ƒ Angle of propeller blades adjustable ƒ Process security thanks to extensive monitoring devices



Pedestal pumps

Norma V

Industrial process

10 50 100 20051 Q/m³/h30202

5

H/m

10

100150

50

20

Wilo-Norma V

Non-submersible pedestal pump with standard motor, discharge bend with axial suction

Pumping of ƒ Cleanorslightlycontaminatedfluidsinindustrial processes

ƒ Lightweight mineral oil products

200 m3/h

100 m

ƒ Permitted temperature range up to 120 °C

ƒ Nominal-ØonpressuresideDN 32toDN 100

ƒ Max.operatingpressurePN 16 ƒ Mainsconnection3~400V,50 Hz ƒ Max. viscosity 150 cSt

ƒ Connection on pressure side above or optionally also below the connection plate

ƒ Flange version in PN 10/16/25 ƒ Basic versions VCS: adjustable base-plate/fixedcoupling

ƒ Basic version VEM: cast iron support/fixedcoupling

ƒ Basic version VTM: bearing block/semi-elastic coupling

ƒ Optional:explosion-prooffloatswitch ƒ Optional:externallubricationofbearingorlubricationprovidedbyfluid(default)

ƒ Low maintenance ƒ No shaft sealing ƒ Noise-free suction ƒ ReplaceableIEC standardmotor ƒ Semi-elastic coupling with the VTM version

ƒ Installation in tanks, vessels, rainwater storage tanks and chambers

Sewage lifting unit

Wilo-HiDrainlift 3

Waste water collection and transport

H/m

5678

43210

3-24 3-35 3-37Q/m³/h0 1 2 3 4 5

Wilo-HiDrainlift 3

Sewage lifting unit

Pumping of pre-cleaned sewage without faeces(DIN EN 12050-2)thatcannotbepiped to the sewer system through the use of natural falls.

6 m3/h

8 m

ƒ Mains connection: 1~230 V ƒ Operationmode:S3 ƒ Fluidtemperature:35 °C,upto60/75 °Cforshortperiods(5min)

ƒ Pressureport:Ø 32mm ƒ Inletconnection:Ø 40mm ƒ Tankvolume:3.9l;16l;15.5l ƒ SwitchingVolume:0.7l;2l;2l

ƒ Ready-to-plug (except HiDrainlift 3-24)

ƒ Thermal motor monitoring ƒ Level control with pneumatic pressure transducer

ƒ Integrated non-return valves ƒ Activecarbonfilter

ƒ Very compact design for the installa-tion into a wet cell or under a shower tray (HiDrainlift 3-24)

ƒ Low-noise operation and integrated activecarbonfilterforahighusercomfort

ƒ Reliable performance and low power consumptionforanefficientwastewa-ter disposal

ƒ Easyinstallationwithflexibleconnec-tion possibilities

ƒ Systems ready for connection ƒ (HiDrainlift 3-35 and HiDrainlift 3-37)



Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart

Sewage lifting unit

Wilo-DrainLift Box... DWilo-DrainLift Box... DS


42 8 10 141260 Q/m³/h0

4

6

8

2

10H/m Wilo-DrainLift Box

Sewageliftingunitforconcealedfloorinstallation

Pumping of pre-cleaned sewage without faeces(DIN EN 12050-2)thatcannotbepiped to the sewer system through the use of natural falls

18 m3/h

10.5 m

ƒ Mainsconnection:1~230 V ƒ Operationmode:S3 ƒ Fluidtemperature:max.35/40 °C ƒ Pressureport:Ø 40mm ƒ Inlet connection: DN100 ƒ Gross volume: 113 l ƒ Switchingvolume:22…31 l

ƒ Single and double-pump system ƒ Ready-to-plug system ƒ Lifting unit with ready-mounted pump, level control, pressure pipe and integrated non-return valve

ƒ Mains connection cable with shock-proof plug

ƒ Thermal motor monitoring ƒ Double pump system with switch gear

ƒ Easy to install due to integrated pump and non-return valve

ƒ Large tank volume ƒ Easy maintenance ƒ Pumps with pressure pipe removable ƒ Stainless steel tile frame with trap

Sewage lifting unit

Wilo-HiSewlift 3

Waste water collection and transport

H/m

5678

43210

Wilo-HiSewlift 33-15, 3-35, 3-I 35

Q/m³/h0 1 2 3 4 5

Sewage lifting unit

Pumping of sewage containing faeces (DIN EN 12050-1)thatcannotbepipedto the sewer system through the use of natural falls

5 m3/h

8 m

ƒ Mains connection: 1~230 V ƒ Operationmode:S3 ƒ Fluidtemperature:max.35°C ƒ Pressureport:Ø 32mm ƒ Inletconnection:Ø 40mm ƒ Grossvolume:14.4l;17.4l ƒ SwitchingVolume:1 l

ƒ Ready-to-plug ƒ Thermal motor monitoring ƒ Level control with pneumatic pressure transducer

ƒ Integrated non-return valves ƒ Activecarbonfilter

ƒ HiSewlift 3-I35 in particularly narrow design(<149mmwidth)foraneasyfront-wall installation

ƒ Low-noise operation and integrated activecarbonfilterforahighusercomfort

ƒ Reliable performance and low power consumptionforanefficientsewagedisposal

ƒ Easyinstallationwithflexibleconnec-tion possibilities

ƒ Ready for connection

Sewage lifting unit

Wilo-DrainLift S


0 5 10 15 20 25 300

1

2

3

4

5

6

Sewage lifting unitSingle-pump system

Pumping of sewage containing faeces (DIN EN 12050-1) that cannot be re-turned to the sewer system using natural falls,andbackflowresistantdrainageofdischargepointsbelowthebackflowlevel

35 m3/h

6 m

ƒ Mainsconnection:1~230 Vor3~400 V ƒ Operationmode:S3 ƒ Pressure port: DN80 ƒ Inlet connection: DN100, DN40 ƒ Fluidtemperature:max.40 °C ƒ Grossvolume:45 l ƒ Switchingvolume:21 l

ƒ Ready-to-plug ƒ Thermal motor monitoring ƒ Levelcontrolwithfloatswitch ƒ Mains-independent alarm ƒ Potential-free contact ƒ Non-return valve (RV version) ƒ Inlet seal ƒ Keyhole saw for inlet borehole ƒ Hose connection for venting ƒ Kit for pressure pipe connection ƒ Fixation material ƒ Soundproofingmaterial ƒ Switchgear

ƒ Space-saving installation ƒ Installation-friendly due to low weight and large scope of delivery incl. non-return valve

ƒ Flexible thanks to freely selectable inlets

ƒ Operationalreliabilitythankstointe-grated thermal motor protection and mains-independent alarm for SSM and high water



Drai

nage

and

sew

age

Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart

Sewage lifting unit

Wilo-DrainLift MWilo-RexaLift FIT L


0 5 10 15 20 25 30 350

4

8

12

16

20

Sewage lifting unitSingle and double-pump system

Pumping of sewage containing faeces (DIN EN 12050-1) that cannot be re-turned to the sewer system using natural falls

40 m3/h

22 m

ƒ Mainsconnection:1~230 Vor3~400 V ƒ Operationmode:S3 ƒ Fluidtemperature:max.40 °C ƒ Pressure port: DN80 ƒ Inlet connection: DN40/50, DN100, DN150

ƒ Grossvolume:62to140 l ƒ Switchingvolume:24to50 l

ƒ Ready-to-plug ƒ Thermal motor monitoring ƒ Levelcontrolwithfloatswitch ƒ Mains-independent alarm ƒ Potential-free contact ƒ Pump cable detachable ƒ Non-return valve (RV version) ƒ Inlet seal ƒ Keyhole saw for inlet borehole ƒ Hose connection for venting ƒ Kit for pressure pipe connection ƒ Fixation material ƒ Soundproofingmaterial ƒ Switchgear

ƒ Low system weight for an easy instal-lation

ƒ Integrated non-return valve ƒ Flexible thanks to freely selectable inlets

ƒ Operationallyreliablethankstointe-grated thermal motor protection and mains-independent alarm for SSM and high water

Sewage lifting unit

Wilo-DrainLift XL


0 5 10 15 20 25 30 350

4

8

12

16

20

Sewage lifting unitDouble-pump system


40 m3/h

22 m

ƒ Mainsconnection:3~400 V ƒ Operatingmode:S1 ƒ Fluidtemperature:max.40 °C ƒ Pressure connection: DN80 ƒ Inlet connection: DN100, DN150 ƒ Gross volume: 380 l ƒ Switchingvolume:260 l

ƒ Thermal motor monitoring ƒ Level control with level sensor ƒ Potential-free contact ƒ Pump cable detachable ƒ InletsealDN 150 ƒ Keyhole saw for inlet seal ƒ Non-return valve ƒ Hose connection for venting ƒ Hose connection for diaphragm hand pump

ƒ Kit for pressure pipe connection ƒ Fixation material ƒ Switchgear with breakdown barrier

ƒ Flexible thanks to height-adjustable and swivel-mounted inlet connection

ƒ Easy operation with menu-guided switchgear

ƒ Integrated non-return valve ƒ Operationallyreliableduetohighswitching volume and reliable level detection

ƒ Continuous duty (S1) possible thanks to the use of self-cooling motors

Sewage lifting unit

Wilo-DrainLift XXL


0 20 40 60 80 100 1200

4

8

12

16

Sewage lifting unitDouble-pump system


140 m³/h

21 m

ƒ Mainsconnection:3~400 V ƒ Operatingmode:S1 ƒ Fluidtemperature:max.40 °C ƒ Pressure port: DN80, DN100 ƒ Inlet connection: DN100, DN150 ƒ Grossvolume:400/800 l ƒ Switchingvolume:305...630 l

ƒ Sheathflowcooling ƒ Thermal motor monitoring and leakage detection

ƒ Level control with level sensor ƒ Potential-free contact ƒ Hose connection for venting ƒ Hose connection for diaphragm hand pump

ƒ Kit for pressure pipe connection ƒ Fixation material ƒ Switchgear with breakdown barrier

ƒ Flexible use thanks to one or two tanks ƒ Optimumtankdrainagewithdeepsuction function

ƒ Operationallyreliablethankstolargeperformance range and a reliable level detection

ƒ Continuous duty (S1) possible due to the use of self-cooling motors



Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart

Sewage lifting unit

Wilo-EMUportCOREWilo-EMUport FTS


Q/m³/h0 10 20 30 40 50 60 70

H/m

048

1216202428

Wilo-EMUportCORE

Sewage lifting unit with solid separation system according to DIN EN 12050-1 for installation in a building or manhole chamber (outdoor)

Pumping of sewage containing faeces or pre-cleaned sewage that cannot be returned to the sewer system using natural falls

80 m³/h

28 m

ƒ Mains connection: 3~400 V ƒ Max. inlet: 60 m³/h ƒ Operationmode:S1 ƒ Fluidtemperature:max.40 °C ƒ Pressure port: DN80, DN100 ƒ Inlet connection: DN200 ƒ Gross volume: 440 or 1200 l ƒ Usabletankvolume:295or900l

ƒ Sewage lifting unit with solid sapara-tion system

ƒ Collection reservoir ƒ 2x solids separation reservoir ƒ 2x sewage pump ƒ Complete pipework including inlet and pressure connection and non-return valve

ƒ Long service life and corrosion resist-ance thanks to PE/PUR material

ƒ Maintenance-friendly as all parts are accessible from outside

ƒ High operational reliability thanks to apre-filteringofsolidmatter,thepumps deliver only the cleaned sewage

ƒ Retrofitsystemfortheeconomicreconstruction of old pump stations

Sewage lifting unitPump chamber

Wilo-DrainLift WS 40 BasicWilo-DrainLift WS 40/50


Pump chamber as concealed pumping stationorfloor-mountedliftingunit


10 m3/h

8 m

ƒ Mainsconnection:1~230Vor3~400 V ƒ Operatingmode:S3 ƒ Fluidtemperature:max.40 °C ƒ Pressureport:Ø 40/50mm ƒ Inlet connection: DN100, DN150 ƒ Grossvolume:255/400 l ƒ Switchingvolume:90/130 l

ƒ Wilo-DrainLift WS 40 Basic including sewage pump Drain TC 40

ƒ For Wilo-DrainLift WS 40/50 following sewage pumps can be used:

- Rexa UNI - Rexa CUT

ƒ Pressure-tight pump chamber for floor-mountedorconcealedfloorinstallation

ƒ Flexible thanks to freely selectable inlets

ƒ Large tank volume ƒ Including pipework, level control, switchgear and pump (basic version)

Pump chamber

Wilo-Port 600Wilo-Port 800


Pump chamber with synthetic tank, as single or double pump system


ƒ Diameter: 600/800 mm ƒ Pressureport:R1¼,R1½ ƒ Inlet connection: DN100, DN150, DN200

ƒ Tank heights: 1500, 1800, 2250 mm ƒ covers: class A15, B125, D400 ƒ Telescopic chamber extension: 500 mm

ƒ Wilo sewage pumps which can be used:

- Drain TMW 32 - Drain TS 40 - Drain TC 40 - Drain STS 40 - Drain MTC - Rexa CUT

ƒ Universal use thanks to continuous pump chamber extension up to 2.75 m

ƒ Anti-buoyant without weights for ground water levels up to the surface of the ground for maximum operation-al reliability

ƒ covers up to load class D 400 ƒ Easy maintenance thanks to surface coupling

ƒ Long service life thanks to pump chamber body made of corrosion-free polyethylene

no illustration no illustration

Smart solution: This product is connectable to pressure drainage systems with Nexos Intelligence.



Drai

nage

and

sew

age

Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart

Pump chamber

Wilo-DrainLift WS 1100


Pump chamber with synthetic tank, as single- or double-pump system


–

–

ƒ Diameter: 1500 mm ƒ Pressureport:Rp1½,Rp2,Rp2½,DN80

ƒ Inlet connection: DN150 ƒ Tank height: 1800 mm ƒ Pumpchambercovers:5kN/m²(inaccordance with DIN EN 124, Group 1)

ƒ Wilo sewage pumps which can be used:

- Drain TS 40 - Rexa UNI - Drain TP 80 - RexaFIT/PRO - Drain MTC - Rexa CUT

ƒ Flexible installation ƒ Anti-buoyant ƒ High stability

Submersible pumps

Wilo-EMU polder pump

Water distribution/boosting, clean water treatment, raw water intake, dewatering, industrial process

0

140120100

20406080

10 20 30 40 50 100 160Polder pump

Potable and process water from tanks or shallowbodiesofwater;municipalandindustrialwatersupply;sprinklingandirrigation

1,200 m3/h

160 m

ƒ Mainsconnection:3~400 V ƒ Fluidtemperature:max.20 °C ƒ Minimumflowacrossoutsideshroud:not necessary

ƒ Max.sandcontent:35 g/m3 ƒ Immersed operating mode: S1 ƒ Max.immersiondepth:300 m

ƒ Multistage submersible pump ƒ Semi-axial impellers ƒ Hydraulicsandmotorfreelyconfigur-able according to power requirements

ƒ Three-phase motor for direct or star-delta start

ƒ Motors rewindable as standard

ƒ Deep water lowering thanks to self-cooling motors

ƒ Sturdy construction in cast iron or bronze

ƒ Compact construction ƒ Maintenance-friendly, rewindable motors

ƒ OptionallywithCeramCTcoatingforincreasingtheefficiency

Recirculation pump

Wilo-EMU RZP 20 to RZP 80-2

Wastewater treatment

0,150

0,5

0,2

1

2

100 200 500 1000

Submersible mixers with housing unit, directly driven or with single-stage planetary gear

Pumping of Wastewater and sewage with low delivery heads and large volume flowsFlow generation in water channels

6,800 m3/h

1.1 m


ƒ Stationary installation directly on the flowpipe

ƒ Flexible installation via lowering device ƒ Vertical or in-line installation ƒ possible

ƒ Vertical or in-line installation possible ƒ Self-cleaning propeller to avoid clogging

ƒ Propeller in steel or PUR

no illustration



Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart

Submersible mixer

Wilo-FlumenOPTI-TRWilo-Flumen EXCEL-TRE


Direct driven submersible mixer

Turbulation of deposits and solids in stormwater retention tank and pump sump;destructionoffloatingsludgelayers

Thrust: 180 - 1,131 N

–


ƒ Stationaryinstallationonwallandfloor ƒ Flexible installation through the use of lowering device or special pipe attachment

ƒ Can be swivelled vertically and hori-zontallywheninstalledwithaloweringdevice

ƒ Low clogging rate and reliable opera-tion thanks to optimised hydraulics

ƒ Low-wearing, due to the use of stain-less steel precision-cast propellers with the lowest cavitation tendency

ƒ Reduction of the energy and operating costs due to the use of IE3 motors for thebestpossiblethrustcoefficient

Submersible mixer

Wilo-EMU TR 50-2 to TR 120-1Wilo-EMU TRE with IE3 motor


Submersible mixer with single-stage planetary gear

Use in activated sludge tanks and sludge tanksforflowgeneration,suspensionofsolids, homogenisation and prevention of floatingsludgelayers

Thrust: 160 - 6620 N

–


ƒ Stationary installation on walls ƒ Flexible installation via lowering device ƒ Canbeswivelledhorizontallywheninstalled with a lowering device

ƒ Installation with stand allows free placement in basin

ƒ Single-stage planetary gear

ƒ Secure your processes. The planetary gear is dimensioned on a large scale so that the mixing forces are absorbed efficiently.

ƒ Efficientenergyusage.Theinnovativeblade geometry ensures the best pos-siblespecificthrustcoefficient.Atthesame time, this reduces your energy and operating costs.

ƒ Reliable operation. Clogging-free operation with backward-curved incomingflowedge.

Submersible mixer

Wilo-EMU TR 212 to TR 326-3Wilo-EMU TRE with IE3 motor


Submersible mixer with two-stage planetary gear

Energetically optimised mixing and circu-lationofactivatedsludge;generationofflowratesincirculationchannels

Thrust:390-4250N

–


ƒ Installation with stand allows free placement in basin

ƒ Flexible installation ƒ Two-stage planetary gear with exchangeable second planetary gear speed

ƒ Efficientenergyusage.Theinnovativebladegeometryandenergy-efficientIE3/IE4 motors ensure the best possi-blespecificthrustcoefficient.Atthesame time, this reduces your energy and operating costs.

ƒ Consistently reliable. The low-wear-ing GFK/PA6 propeller is durable and scores with its self-cleaning effect.

ƒ Smooth running thanks to the balanced propeller load, even in high thrustrangesandwhenincomingflowconditions are unfavourable.

NEW




Drai

nage

and

sew

age

Volume flow Q max.

Product range

Series


Design

Application


Technical data

Equipment/function

Special features

Duty chart

Vertical mixer

Wilo-Vardo WEEDLESS


Vertical mixer with standard gear motor

Energetically optimised mixing and circu-lation of activated sludge

Thrust: max. 6000 N

–

ƒ Mainsconnection:3~230/400 V, 50/60 Hz

ƒ Operatingmode:S1 ƒ Protectionclass:IP 55 ƒ Fluidtemperature:max.40 °C ƒ Efficiencyclass:IE3,IE4

ƒ Versionwithfloatforfloatinginstal-lation

ƒ Version with 2 propellers ƒ Version with Ex-rating ƒ Version with integrated frequency converter

ƒ Efficientenergyusage.Theener-gy-efficientIE3/IE4motorsreduceyour energy and operating costs.

ƒ Consistently reliable. The low-wear-ing full-material PUR propeller is durable and and can be adapted to the system requirments with an angular adjustment.

Treatment process

Wilo-Sevio ACT

Wastewater treatment, industrial process

Solids diffuser

Gentle mixing process of biomass parti-clesinthepumpedfluid

Circulationcapacity3300–4000m3/h

–

ƒ Mains connection: 3~400 V ƒ Immersed operating mode: S1 ƒ Protection class: IP 68 ƒ Fluidtemperature:max.40 °C ƒ Max. immersion depth: 20 m

ƒ Height-adjustable suction pipe due to lowering device

ƒ Suction pipe with telescopic extension

ƒ Careful introduction of the biomass carrierparticlesintothefluid

ƒ Higher volume penetration for opti-mising the cleaning process

ƒ Reduced energy costs thanks to an improved cleaning performance

ƒ Also with IE3 motor technology (on the basis of IEC 60034-30)

ƒ Retrofitoptionforexistinginstalla-tions

Aeration

Wilo-Sevio AIRWilo-SevioELASTOX

Sewage treatment

Aeration system with panel, tube or disc diffusers

Forfine-bubbleaerationofaqueousme-dia such as water, wastewater or sludge, for the purposes of supplying oxygen

–

–

–

ƒ Aeration system including pipework made from PVC or stainless steel

ƒ High operational reliability thanks to integrated non-return valve

ƒ Highsystemefficiencyduetoin-creased ventilation capacity

ƒ Optimisedventilationprocessduetoselection of the appropriate diffuser - panel, tube or disc diffuser

ƒ Optimisationoftheventilationprocessin combination with submersible mixers

Series extension


NEW



66 Service and support

PRACTICAL SUPPORT FOR YOUR DAILY WORK.

We work hard to make your life easier. That is why our range is not only limited to high-quality products and systems that you can count on at any time. We also provide intelligent services for all project phases, from design and configurationthroughtocommissioningandmaintenance.We keep you informed about the very latest technologies and trends and provide attractive options for project financing.Wearealwaysavailable –withpersonal,compe-tentandlocalservicesinover60 countriesandmore than2,500 Wiloengineersworldwide.

ALWAYS AT YOUR SIDE: WILO SERVICES.

67

PRACTICAL SUPPORT FOR YOUR DAILY WORK.

OUR SERVICE FOR YOU – FROM CONSULTING TO MAINTENANCE.

Wilo-Energy Solutions For greater economy and sustainability: Wilo-Energy Solutions helps customers be proactive in replacing un-controlled pumps that are currently in operation with Wilo high-efficiencypumps.Thisallowsyoutoreduceelectric-itycostsforpumpsinyourbuildingsbyupto90 percent.We offer targeted consulting and analysis to give you an overview of potential savings, necessary investments and amortisation periods. And we provide comprehensive supportduringthetransitiontohigh-efficiencytechnologysolutions.

Wilo-Financial Services Whenitcomestoprojectfinancing,wealsogladlyprovideassistance. With Wilo-Financial Services you can combine the best pumps with matching services and then receive asuitablefinancingoffer,allfromasinglesource.Ourpackages revolve around energy savings and do not require additionalinvestments.Benefitfromourenergy-efficientproducts, optimise the climate footprint of your building and save money instantly. We work with you to develop a financingofferthatmeetsyourneedswhileofferingplentyofflexibility.

Try & BuyInvestments require a great deal of planning. Product re-liabilityandefficientoperationarealwayscentralconsid-erations. But how do you make the right decision? Wilo’s unique service can help. Try & Buy allows you to experience the quality of Wilo products for yourself before buying. Test our products* in your own system, and invest reliably in the future. Please note that Try & Buy is not available in all sub-sidiaries. Enquire with your local Wilo partner about options for using this service.

WiloCareWith WiloCare your cost security and operational reliability are ensured. The service package provides you with month-ly reports on the current status of your system, energy consumption, possible optimisation measures and pending maintenance intervals. Individual options can be adjusted preciselytoyourrequirements,allatafixedmonthlyprice.Choosetheversionthatfitsyoubest:Basic,ComfortorPremium.

*Ask us what series are available. Serv

ice

und

Supp

ort

68 Service and support

OUR TOOLS AND TRAINING: COMPREHENSIVE AND PRACTICE-ORIENTATED.

Wearethereforyouworldwide,365 daysayear.Withover2,500 technicians,ourteamsassistyouinover60 countries –not just to meet your needs and requirements but to exceed them whenever possible. A phone call is all it takes and we’ll initiateallthenecessarysteps –quickly,professionallyandindirectcoordinationwithyou.Ourservicepledgeholdsforthe entire life cycle of your Wilo products. Because you can always rely on Wilo.

DESIGN AND SELECTIONWe want you to find the perfect solution for your require-ments. That’s why we provide personal consulting before your purchase to help you find the best and most economi-cal product solution.

Our services at a glance:ƒ On-sitesupportƒ Wilo-Select pump design softwareƒ Installation drawingsƒ Convenient integration of our product data into the

BIM model for optimal consulting supportƒ Efficiency checks to determine the economic efficiency

of existing pumps and suitable replacement pumps

PLACEHOLDER69

SERVICEWilo has a long tradition of collaborating with installers and plant engineers. Service is an essential component of this partnership. We collaborate to develop a service concept tailoredtoyourindividualneeds –withourexpertiseandpersonal consulting, we make sure that the operation of your systems is as energy-efficient, reliable and econom-ical as possible. All the while, our competent Wilo service technicians are ready to assist you with fast, reliable and on-time support.

Our services at a glance:ƒ Rapid repair serviceƒ Commissioningƒ Customised, reliable maintenance conceptsƒ Optimisationandreplacementƒ Fast spare parts solutionsƒ Service packages

TRAINING AND SEMINARSWe want you to be able to use innovative technologies and products from Wilo optimally and integrate them perfectly into your working process. With this goal in mind, we offer expert-led seminars designed for the specific needs and applications of your industry. Expand your knowledge andputourexpertisetoworkforyou.Ourseminarsalsogive you the opportunity to exchange ideas with industry colleagues. We also develop company seminars for your particular requirements.

Our services at a glance:ƒ Practically orientated product and system seminarsƒ Instructors with long-term practical experienceƒ Ideal space for meeting colleagues and exchanging ideasƒ Dialogue-based training concepts for active learningƒ Wilo-Brain qualificationƒ System consulting

Serv

ice

and

supp

ort

NOW. PUMP TECHNOLOGY OF THE FUTURE. THE FUTURE IS

NOW.

More contact details at www.wilo.com

WILO SENortkirchenstraße 100D-44263 DortmundGermanyT +49 231 4102-0F +49 231 [email protected]

2200591/5T/1805/EN/FRO

Documents

Efficient solutions – 50 Hz Wilo General Overview 2018...technologies user-friendly, simple to operate, energy- efficient and powerful for our customers. In the end, the main focus