Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
VOYAGER MOTORS & DRIVES
DRIVE SYSTEMS GROUP
www.drivesystemsgroup.ca
DRIVE SYSTEMS GROUP
DRIVE SYSTEMS GROUP INC. PH:905 405-0310 FAX:905 405-0313 www.drivesystemsgroup.ca
Closed loop hMTechnology / servo motor performance
Integrated Motor electronics with motion control & 8 I/O
High Torque at starting and low speeds
No tuning required / Stiffness at standstill / Built in encoder
EtherNet—CANopen—ProfiNET-RS232-RS485 & standalone
Connectors: Pluggable or IP65 screw type
Voyager Series VB1
Belt Slide
Motor Option [M] Nema 34 Intelligent Motor
FEATURES:
GLOBAL DIMENSIONS
Motor Part number LMDCM853
Motor Type Stepper— 1.8 degree
Nema 34
Voltage 24-48 vdc
Holding Torque 57 lb-in
Current 4 amps
SPECIFICATIONS
LMDCM853
CATALOG NUMBER
SPEED TORQUE CHARACTERISTICS
The free Lexium MDrive Software Suite includes
a user interface GUI for product commissioning
and programming via a PC. Programming is
with MCode, simple 1 to 2 character instruc-
tions. Equipped with a 1000 line (4000 count/
rev) encoder internal to the unit. The Encoder
performs stall detection, position maintenance
and index mark homing. It also monitors motor
shaft position for real time closed loop feedback
via hMTechnology.
SOFTWARE
*For Canadian Customers: This product must be used in conjunction with a CSA approved Class 2 power supply.
DRIVE SYSTEMS GROUP
DRIVE SYSTEMS GROUP INC. PH:905 405-0310 FAX:905 405-0313 www.drivesystemsgroup.ca
Nema 34 Stepper Motor
High Torque Design
Japanese NSK 6002 Bearings
Half Inch Diameter output shaft
High Reliability
Voyager Series VB1
Belt Slide
Motor Option [S] Nema 34 Stepper
FEATURES:
GLOBAL DIMENSIONS
Motor Part number DY-VB07VWK19-
6226D 332219247
Motor Type Stepper— 1.8 degree
Nema 34
Voltage 24-48 vdc
Holding Torque 60 lb-in
Current 4 amps
SPECIFICATIONS
DY-VB07VWK19-6226D 332219247
CATALOG NUMBER
*For Canadian Customers: This product must be used in conjunction with a CSA approved Class 2 power supply.
DRIVE SYSTEMS GROUP
DRIVE SYSTEMS GROUP INC. PH:905 405-0310 FAX:905 405-0313 www.drivesystemsgroup.ca
Bi-Polar two phase Micro-Stepping Driver
Pure Sinusoidal current control provides reduced noise
24-48vdc Supply Voltage
Output current adjustable from 1-4.2 Amps
Idle Current reduction reduces motor heating at standstill
Selectable Micro-Step resolutions upto 25000 steps per rev
Voyager Series VB1
Belt Slide
Control Option [S] Stepper Driver
FEATURES:
GLOBAL DIMENSIONS
Drive Part number DY-CP-4K726*
Type 2-phase Bipolar
Micro-stepping
Voltage 24-48 vdc
Micro-Step Range 400-25000
Current 1-4.2 amps
SPECIFICATIONS
DY-CP-4K726
CATALOG NUMBER
WIRING
A cost effective, high performance bi-polar two
phase micro-stepping drive utilizing pure-
sinusoidal current control. Suited for the appli-
cations that require low noise and reduced mo-
tor heating. Pure-sinusoidal control eliminates
current ripple, which causes vibration, noise
and motor heating. With close to zero vibration
and noise, performance is close to a servo sys-
tem, allowing the motor to operate smoothly.
OVERVIEW
*For Canadian Customers: This product must be used in conjunction with a CSA approved Class 2 power supply.
DRIVE SYSTEMS GROUP
DRIVE SYSTEMS GROUP INC. PH:905 405-0310 FAX:905 405-0313 www.drivesystemsgroup.ca
Miniature Bi-Polar two phase Stepping Driver
Dual full H-bridge with constant current control
12-40vdc Supply Voltage
Output current adjustable from 1.5-4 Amps
Die Cast Aluminum Enclosure
Selectable resolutions from 200 - 3200 steps per rev
Voyager Series VB1
Belt Slide
Control Option [M] Mini Stepper Driver
FEATURES:
GLOBAL DIMENSIONS
Drive Part number TXI24004*
Type 2-phase Bipolar step
driver
Voltage 12-40 vdc
Step Range 1-Full,1/2,1/4,1/16
Current 1.5-4 amps
SPECIFICATIONS
TXI24004
CATALOG NUMBER
WIRING
A cost effective, high performance miniature bi-
polar two phase drive. Suited for applications
that where electrical panel space is limited.
Mixed decay current control reduces the back
EMF effect under high motor speeds and im-
proves performance. Enclosure is made of die
cast aluminium which provides a rugged pack-
age and improved heat dissipation.
OVERVIEW
*For Canadian Customers: This product must be used in conjunction with a CSA approved Class 2 power supply.
DRIVE SYSTEMS GROUP
DRIVE SYSTEMS GROUP INC. PH:905 405-0310 FAX:905 405-0313 www.drivesystemsgroup.ca
Rare Earth DC Servo Motor
Externally Replaceable Brushes
500 Line Quadrature Encoder
Encoder is Sealed with input Ball Bearing in Aluminum Can
Voyager Series VB1
Belt Slide
Motor Option [V] Nema 23 DC Servo Motor
FEATURES:
GLOBAL DIMENSIONS
Motor Part number DY-F6-384L-0B222-
249/ HO50I722C70
8.57A5SU
Motor Type 150watt DC Servo
Motor with 500 line
Encoder
Voltage [Rated] 24-75vdc [48vdc]
Speed @ [Rated voltage] 4500 rpm
Torque: Continuous / Peak 3.1 / 24.8 lb-in
Current: Rated / Peak 4.66 / 44.3 amps
SPECIFICATIONS
DY-F6-384L
CATALOG NUMBER
ENCODER INFORMATION
*This product is not for sale in Canada. This product is
for Export only.
DRIVE SYSTEMS GROUP
DRIVE SYSTEMS GROUP INC. PH:905 405-0310 FAX:905 405-0313 www.drivesystemsgroup.ca
Compact Design
Surface mount technology
24-48vdc Supply Voltage
Fast Response Output
Encoder Feedback
Voyager Series VB1
Belt Slide
Control Option [V] DC Servo Drive
FEATURES:
GLOBAL DIMENSIONS
Drive Part number MCS 060-6/12-NS-
xxx/E*
Type DC Servo Drive with
Encoder Feedback
Voltage 20-82 vdc
Current: Cont / Peak 6/12 amps
Diff. Analogue Input Ref +/- 10vdc
SPECIFICATIONS
MCS 060 6/12
CATALOG NUMBER
WIRING
*This product is not for sale in Canada. This product is
for Export only.
DRIVE SYSTEMS GROUP
DRIVE SYSTEMS GROUP INC. PH:905 405-0310 FAX:905 405-0313 www.drivesystemsgroup.ca
Rare Earth, Sinusoidal AC Servo Motor
Hybrid Single Cable For both feedback and Power
High Inertia Rotors
Serial Encoder good in High Electrical Noise Environments
Optional Holding Brake & IP65
Voyager Series VB1
Belt Slide
Motor Option [L] 325Watt AC Servo Motor
FEATURES:
GLOBAL DIMENSIONS
Motor Part number MKM-70s
Motor Type 325Watt AC Servo
Voltage [Rated] 220vac
Speed @ [Rated voltage] 3000 rpm
Torque: Continuous / Peak 8.85 / 2-3x lb-in
Current: Rated / Peak 1.2 / 2-3x amps
SPECIFICATIONS
MKM-70s
CATALOG NUMBER
MOTOR CABLES
MKCH-BCH/00-030 – 3Mt/9.8ft preassembled hybrid cable
MKCH-BCH/00-050 – 5Mt/16.4ft preassembled hybrid cable
MKCH-BCH/00-070 – 7Mt/22.9ft preassembled hybrid cable
MKCH-BCH/00-100 – 10Mt/32.8ft preassembled hybrid cable
*For Canadian Customers: This product is supplied as a component of the MACK Servo System which is provided with ESA Special Inspection Certification.
DRIVE SYSTEMS GROUP
DRIVE SYSTEMS GROUP INC. PH:905 405-0310 FAX:905 405-0313 www.drivesystemsgroup.ca
For use with customer supplied controller or PLC
Supplied chassis mount or as optional prewired rack
Compact Design—Several drives powered by single power
supply unit
230VAC Input with Built in EMC Line filter
USB - single access point for setting and monitoring of all
drives
Single HYBRID cable for motor connection
Voyager Series VB1
Belt Slide
Control Option [L] AC Servo Drive Two Axis package
FEATURES:
GLOBAL DIMENSIONS
Drive Part number Mack Two Axis
325watt control
Type AC Servo Drive with
Serial Encoder
Voltage 230vac 1or3 phase
Current: Cont / Peak 6/12 amps
Diff. Analogue Input Ref +/- 10vdc [step&dir]
SPECIFICATIONS
MACK TWO AXIS 325WATT CONTROL PKG
CATALOG NUMBER
STANDARD TWO AXIS CONFIGU-RATION
OPTIONAL RACK CONFIGURATION
Note: 4-axis Mack Rack Pictured
OPTIONAL RACK ENCLOSURE
*For Canadian Customers: This product is supplied with ESA Special Inspection Certification.
DRIVE SYSTEMS GROUP
DRIVE SYSTEMS GROUP INC. PH:905 405-0310 FAX:905 405-0313 www.drivesystemsgroup.ca
Supplied as ready use package, prewired Rack with program-
mable controller. Optional Enclosure.
Can be programmed using TRIO Motion Perfect or with optional
DY-UDB-CNC, G-code Software Suite. [Includes 3-axis CNC type front end and functionality, complete with Touchscreen.]
Compact Design—Several drives powered by single power
supply unit
230VAC Input with Built in EMC Line filter
USB - single access point for setting and monitoring of all
drives
Voyager Series VB1
Belt Slide
Control Option [T] Two Axis system with TRIO Controller
FEATURES:
GLOBAL DIMENSIONS
Drive Part number Mack Rack + Trio
Two Axis 325watt
control package*
Type AC Servo Drive with
Serial Encoder
Voltage 230vac 1or3 phase
Current: Cont / Peak 6/12 amps
TRIO E-404
SPECIFICATIONS
MACK RACK + TRIO TWO AXIS 325WATT CONTROL
CATALOG NUMBER
STANDARD CONFIGURATION
Note: 4-axis Mack Rack Pictured
OPTIONAL RACK
ENCLOSURE
*For Canadian Customers: This product is supplied with ESA Special Inspection Certification.
DRIVE SYSTEMS GROUP
DRIVE SYSTEMS GROUP INC. PH:905 405-0310 FAX:905 405-0313 www.drivesystemsgroup.ca
Supplied with MACK RACK + TRIO TWO AXIS 325WATT CON-
TROL PACKAGE
Motion Coordinator E404 is supplied as a programmable two
axis servo motor positioner. It can be programmed with Trio- BASIC, IEC61131-3 or RAYCNC standard languages uses a PC. It can be set to run as standalone or with an external computer as necessary.
16 built in 24vdc Inputs / 8 built in output channels
Ethernet port, one RS-232 port and one RS-485 port. Modbus
protocol for PLC or HMI interfacing. Built in CAN channel for extending I/O
Expandable I? module on CAN
Interpolation modes: Linear, Circular and helical,
Removable Storage by Micro SD card up to 16Gbytes
Includes Motion Perfect Programming suite and programming
cables
Analogue inputs: 2 x 12bit 0-10v
Analogue outputs: 4 isolated 12 bit +/- 10v
Position resolution: 64 bit position count
Servo Cycle: 125us minimum, 1ms default, 2ms max.
Voyager Series VB1
Belt Slide
Control Option [T] TRIO E404 Two axis Controller
FEATURES:
Drive Part number E404
Type Motion Coordinator
Voltage 5vdc
Current: Cont / Peak 600 mA
TRIO E-404
SPECIFICATIONS
E404
CATALOG NUMBER
GLOBAL DIMESNIONS
*For Canadian Customers: This product is supplied with ESA Special Inspection.
STANDARD CONFIGURATION
DRIVE SYSTEMS GROUP
DRIVE SYSTEMS GROUP INC. PH:905 405-0310 FAX:905 405-0313 www.drivesystemsgroup.ca
Voyager Series VB1
Belt Slide
Control Option [T] TRIO E404 Accessories
Trio’s unique UNIPLAY HMI system is a revolutionary way to
make operator interfaces better, easier and more secure! The UNIPLAY series boasts a 7" and 10" colour display. The UNIPLAY range has built-in power isolation technology making it more reliable in noisy environments.
No additional software is required; Uniplay HMI’s work with the
Trio E404 Motion Coordinator. Motion Perfect v3 is used to create operator HMI screens which are transferred to the UNIPLAY HMI by the Motion Coordinator at runtime
CREATING SCREENS………...EASY!
UNIPLAY HMI (P483, P484)
CAN 16 Out I/O Digital module (P317)
CAN 16 IN I/O Digital module (P318)
CAN 16 I/O Digital programmable bi-directional module (P319)
CAN 8 IN - 4 Out I/O 12 bit ANALOGUE module (P326)
CAN 8 Out Lo Power RELAY module (P327)
CAN Expansion Modules
GLOBAL DIMENSIONS
GLOBAL DIMENSIONS
DRIVE SYSTEMS GROUP
DRIVE SYSTEMS GROUP INC. PH:905 405-0310 FAX:905 405-0313 www.drivesystemsgroup.ca
This software is FREE. Supplied with MACK RACK + TRIO TWO
AXIS 325WATT CONTROL PACKAGE
Motion Perfect v3 is designed to make setup, diagnostics, com-
missioning and using the E404 Motion Coordinator as simple as possible. It provides the user with an easy to understand Win-dows based interface for rapid application development, con-troller configuration and monitoring of controller processes.
TrioBASIC is a multi-tasking programming language used by
the E404 Motion Coordinator. The syntax is similar to that of other BASIC family languages.
BASIC Program Editor. Simultaneously edits the controller
program and a copy on disk - programs do not need to be downloaded after editing. Windows style editor with Cut, Copy & Paste - uses the Windows clipboard so information may be pasted between programs2 axis Delta systems are programmed in familiar Cartesian coordinates while the complex axis position calculations are taken care of by the E404 Motion Coordinator.
Comprehensive set of move types supporting multiple axis
coordination as well as simple single axis moves. This includes linear, circular and spherical interpolation as well as cam pro-files and software gearboxes.
IEC 61131-3 Program Editor. Function Block, Structured Text,
Ladder and Sequential Function Chart methods. (IL not sup-ported) Run IEC and BASIC programs at the same time.
CAD2Motion is a program designed to allow users to translate
CAD generated two dimensional motion paths into TrioBASIC programs.
The Trio ActiveX component provides a direct connection to the
Trio Motion Coordinators. Expandable I/O modules on CAN.
Trio MCLoader is a Windows ActiveX control which can load
projects (produced with Motion Perfect) and programs onto a Trio Motion Coordinator. Removable Storage by Micro SD card up to 16Gbytes.
Support for hardware position capture
Support for high speed outputs
Voyager Series VB1
Belt Slide
Control Option [T] Motion Perfect v3 Software Suite
FEATURES:
Drive Part number Motion Perfect v3
Type Programming Inter-
face
TRIO E-404
SPECIFICATIONS
Motion Perfect v3
CATALOG NUMBER
DRIVE SYSTEMS GROUP
DRIVE SYSTEMS GROUP INC. PH:905 405-0310 FAX:905 405-0313 www.drivesystemsgroup.ca
Supplied Optionally with MACK RACK + TRIO
TWO AXIS 325WATT CONTROL PACKAGE
DY-UDB-CNC combines CNC G-code operation
together with Automation features. It pro-vides a complete solution with operator inter-face and File or recipe handling and storage. For OEM’s it can be tailored for a specific application.
Up to 4 axis
G-code programming
CNC look front end
Tool path look ahead with GRAPH View
Spindle on/off + Speed control
AUTO - MANUAL Speed Control with override
Tool Change
I/O control
Customization provides only the features that
are required for the application
Built in 24vdc Inputs / 8 built in output chan-
nels
USB/Local & Wireless Control and file handling
Voyager Series VB1
Belt Slide
Control Option [T] DY-UDB-CNC
FEATURES:
Part number DY-UDB-CNC
Type CNC OPERATOR
INTERFACE
SPECIFICATIONS
DY-UDB-CNC
CATALOG NUMBER
G CODE Debug BLOCK STEP
GRAPH VIEW
SUPPORTED G & M
CODES
G0 M0
G1 M1
G2 M2
G4 M3
G17 M4
G18 M5
G19 M6
G20 M7
G21* M8
G28 M9
G53 M30
G54 M48
G55 M49
G60 M100
G61 M101
G64
G90
G91
*Metric is stand-ard Imperial op-tional.
MANUAL MODE
www.drivesystemsgroup.ca
7150 Torbram Rd. Unit 1&2 Mississauga - Ontario L4T 3Z8 Canada
Phone: 905.405.0310 Fax: 905.405.0313