Diesel smoke tester / OP-160, OP-160EOpacimeter

Diesel Smoke Tester

Opacimeter

Gas Analyzer

B-806, TWINTECH, 345-9 GASAN DONG, GEUMCHEON GU, SEOUL, KOREA.(Tel)+82-2-838-6300 (Fax)+82-2-6292-6292/+82-2-839-4700E-mail : export@koeng.com

http://www.koeng.com Koeng Co., Ltd.

Koeng Co., Ltd.

• The manufacture reserves the right to change the product specifications without notice and liability.

RPM Measurement (Optional)It measures the revolution of engines by use of an acoustic sensor that is chosen and suitable for local vehicles.

Oil Temperature Measurement (Optional) The measured values of smoke may vary by the temperature of engine oil. For accuracy, the oil temperature is measured.

Portability and simple installationOP-160 is easy to install, easy to use, and by attaching a wheeled base to the measuring part it is easy to carry.

The product can be used in a harsh climate (such as at the temperature of -10°C) to conform to the local environment regulations and the local climates. A special feature by the patent technology is implemented to heat up the anti-pollution air to 80°C and the sampling line to 180°C.It offers excellent logic in diagnosis of veering in probes by measuring the sample gas temperate inside the chamber.

Selectable DisplayDisplay options are available to cater for various measurement envi-ronments. The hand-terminal enables one person to install and test simultaneously.

Display unit (Type A) The hand terminal for checks at any time -Vehicle number, telephone number, chassis number can be entered by use of the remote controller.-Korean, English and numbers are entered in the same way as for a mobile phone.-A built-in compact printer is provided (as default).-Time and date of measurement can be shown on the printed output.-One can conduct test on his own on the driver’s seat.-Data including vehicle information, test results and time is saved as a set of information .-999 sets of measurements can be saved.-Additional data storage is enabled by connecting to a PC.-Suitable for irregular checks at any time.

Display unit (Type B)-Such data as vehicle number, telephone number, chassis number can be entered.-A compact printer supporting both Korean and English can be con-nected to the product (optional)-Time and date of measurement can be shown on the printed output.-10 measurement results can be saved.-The measurement results can be shown in graph as the product uses the 320*240 pixel graphic LCD. -Suitable for precise test centers and R&D centers.

AccuracyThe zero drift and the linearity conform to 0.1% which is stricter than the international standard (of ‘less than 1%’). It is trouble free in aspects of reliability and repeatability.

Design Features OP-160

Special Features OP-160

Example of an outdoor use

B

Light source Light emitting diode of 563nmDetector Silicon photodiodeDisplay Graphic LCD to one decimal placeAccuracy 0.1%Measuring range 0.0 ~ 100.0%The2ndBessel response 1.0 secondPhysical response 0.01 secondZero drift 0.1 ~ 0.2%Thermal stability 0.1 ~ 0.2%Warm-up tim eLess than 3 minutesRecord output 0~4 voltPower 220V AC, 12V DC (optional)

Display type is selectable A or B

Model for engine Generator

Model. OP-160E

A

Real-Time Smoke Measurement

Excellent Korean Technology Award by the Ministry of Science and Technology. Registered with the Public Procurement Service as an excellent product.

The product has been approved by major automakers in their development of DPF performances and in the Euro IV overseas certifications. The product conforms to the international standard (ISO11614), the EU standard (ECER24) and the US standard (SAE J1667).

CO,HC,CO2:NDIR Method O2,NOX:Electrochemical Cell

Resolution Measuring range Resolution Measuring range Resolution Measuring range Resolution Repeatability Less than ±2% FS Response time Within 10 seconds (more than 90%) Warming up time About 2 ~ 6 minutes Sample collecting quantity 4 ~ 6 L/min Power AC110V / AC220V ±10%, 50 / 60Hz Power consumption About 50 W Operation temperature 0°C~ 40°C Dimensions Packing dimensions Net Weight(Gross weight) 4.5 kg (9.2 kg)

INFRARED MULTI-FUNCTION AUTOMOTIVEGAS ANALYZER

- Outstanding accuracy, stability and durability- NOx measurement upgradable(option)- Response time of less than 10 seconds- Stand-by for low power consumption when unit is not in use- Automatic adjustment of warming-up time (2~8minutes.)- Six LED indicators- internal printer- RS232 PC program- Elegant appearance- Portable (compact size, light weight)- Extra filters and printer paper- For professional use of engine tune-up- Compatible with chassis dynamo and engine tune-up

• Air leakage check• Hold : temporary pause to measurement• The zero/span calibration•The selection of fuel type : 1.Gasoline 2.LPG 3.CNG 4.Alcohol• Hcv and Ocv conversation• Printing of data

Features KEG-500(4GAS)

- Semi-permanent life time guaranteed- Indication of the value in decimal point to enhance the accuracy- Rapid and accurate service system provided to realize the best customer service, regardless of service period

Features DS-2000

Smoke sampling Air cylinder Sampling Volume 330 ±15cc Display digital display Testing method standard contamination paper Measurement range 0.0~100 % Min, Scale Value 0.1% (1/1000) Degree of indication Max, indication 2% Power supply AC 220V / 50~60 Hz Net dimension 330 x 360 x 370 Packing dimension 360 x 380 x 380 (mm) Net weight (Gross weight) 15 kg (18 kg )

Specification DS-2000

Specification

Function KEG-500(4GAS)

-Portable (compact size, light weight)-Outstanding accuracy, stability and durability-Response time of less than 10 seconds-Stand-by for low power consumption when unit is not in use-Automatic adjustment of warming-up time (2-8minutes.)-Two LED indicators-Extra filters and printer paper-Elegant and simple appearance

• Air leakage check

• The zero/span calibration

Features KEG-200(2GAS)

Function

285 (W) X 410 (D) X 155 (H) mm530 (W) X 430 (D) X 350 (H) mm

Measuring method

RS232Communication cable, Printer, Printer paper(2gas opional)

Basic accessories

Measuring item

CO, HC : NDIR

Measuring range

CO, HC, CO2, O2, λ (air surplus rate), AFR,

NOX (optional)CO, HC

CO HC

CO2 O2

λ

NOx

AFR

0.00~9.99%

0.01%

0.1%0~2.000

0.0010-5000ppm

1ppm

0.0~20.0%

0~9999ppm0~20,000ppm(optional)

Probe, Probe hose, Spare fuse, Leak test cap, Spare filter, Operation manual, Power cord,Ground cable, Calibration controller nipple,

Calibration connecting hose

1ppm

0.01%0.0~99.0

0.1

0.00~25.00%

KEG-200(2GAS) KEG-500(4GAS) Model

KEG-200(2gas)

KEG-500(4gas)

DS-2000

DIESEL SMOKE TESTER / DS2000

DIESEL SM

OK

E TESTER / DS2000

Realizing Perfect Quality with the Principie Aiming toward the Best Technology

Measurement principle Reflection photometry

MODEL

Diesel smoke tester / OP-160, OP-160EOpacimeter

• The test mode

Snap Acceleration TestA snap acceleration test can be conducted on a non-moving vehicle. Follow-up mode TestBy connecting to a notebook computer the prolonged data recording of measurements on the chassis dynamometer, the engine dynamometer and the actual driving test is enabled.

• Design Features

Data measurement and recordingData such as smoke density, engine RPM, temperature of engine oil can be transmitted to a PC for a continuous recording. Continuous use on the road for irregular checks, for visiting tests or for driving tests is enabled without a main power.

Controller Installation, moving and measurement is easy any where. Key buttons at the front panel ensure user-friendliness.

DisplayUse of a graphic LCD ensures easy read-outs. Help is provided with the measurement values. Brightness can be adjusted for night use.

The test mode OP-160 Design Features OP-160 The Measuring Unit Model. OP-160

Real-Time Smoke Measurement

Excellent Korean Technology Award by the Ministry of Science and Technology. Registered with the Public Procurement Service as an excellent product.

The product has been approved by major automakers in their development of DPF performances and in the Euro IV overseas certifications. The product conforms to the international standard (ISO11614), the EU standard (ECER24) and the US standard (SAE J1667).

CO,HC,CO2:NDIR Method O2,NOX:Electrochemical Cell

Resolution Measuring range Resolution Measuring range Resolution Measuring range Resolution Repeatability Less than ±2% FS Response time Within 10 seconds (more than 90%) Warming up time About 2 ~ 6 minutes Sample collecting quantity 4 ~ 6 L/min Power AC110V / AC220V ±10%, 50 / 60Hz Power consumption About 50 W Operation temperature 0°C~ 40°C Dimensions Packing dimensions Net Weight(Gross weight) 4.5 kg (9.2 kg)

INFRARED MULTI-FUNCTION AUTOMOTIVEGAS ANALYZER

- Outstanding accuracy, stability and durability- NOx measurement upgradable(option)- Response time of less than 10 seconds- Stand-by for low power consumption when unit is not in use- Automatic adjustment of warming-up time (2~8minutes.)- Six LED indicators- internal printer- RS232 PC program- Elegant appearance- Portable (compact size, light weight)- Extra filters and printer paper- For professional use of engine tune-up- Compatible with chassis dynamo and engine tune-up

• Air leakage check• Hold : temporary pause to measurement• The zero/span calibration•The selection of fuel type : 1.Gasoline 2.LPG 3.CNG 4.Alcohol• Hcv and Ocv conversation• Printing of data

Features KEG-500(4GAS)

- Semi-permanent life time guaranteed- Indication of the value in decimal point to enhance the accuracy- Rapid and accurate service system provided to realize the best customer service, regardless of service period

Features DS-2000

Smoke sampling Air cylinder Sampling Volume 330 ±15cc Display digital display Testing method standard contamination paper Measurement range 0.0~100 % Min, Scale Value 0.1% (1/1000) Degree of indication Max, indication 2% Power supply AC 220V / 50~60 Hz Net dimension 330 x 360 x 370 Packing dimension 360 x 380 x 380 (mm) Net weight (Gross weight) 15 kg (18 kg )

Specification DS-2000

Specification

Function KEG-500(4GAS)

-Portable (compact size, light weight)-Outstanding accuracy, stability and durability-Response time of less than 10 seconds-Stand-by for low power consumption when unit is not in use-Automatic adjustment of warming-up time (2-8minutes.)-Two LED indicators-Extra filters and printer paper-Elegant and simple appearance

• Air leakage check

• The zero/span calibration

Features KEG-200(2GAS)

Function

285 (W) X 410 (D) X 155 (H) mm530 (W) X 430 (D) X 350 (H) mm

Measuring method

RS232Communication cable, Printer, Printer paper(2gas opional)

Basic accessories

Measuring item

CO, HC : NDIR

Measuring range

CO, HC, CO2, O2, λ (air surplus rate), AFR,

NOX (optional)CO, HC

CO HC

CO2 O2

λ

NOx

AFR

0.00~9.99%

0.01%

0.1%0~2.000

0.0010-5000ppm

1ppm

0.0~20.0%

0~9999ppm0~20,000ppm(optional)

Probe, Probe hose, Spare fuse, Leak test cap, Spare filter, Operation manual, Power cord,Ground cable, Calibration controller nipple,

Calibration connecting hose

1ppm

0.01%0.0~99.0

0.1

0.00~25.00%

KEG-200(2GAS) KEG-500(4GAS) Model

KEG-200(2gas)

KEG-500(4gas)

DS-2000

DIESEL SMOKE TESTER / DS2000

DIESEL SM

OK

E TESTER / DS2000

Realizing Perfect Quality with the Principie Aiming toward the Best Technology

Measurement principle Reflection photometry

MODEL

Diesel smoke tester / OP-160, OP-160EOpacimeter

• The test mode

Snap Acceleration TestA snap acceleration test can be conducted on a non-moving vehicle. Follow-up mode TestBy connecting to a notebook computer the prolonged data recording of measurements on the chassis dynamometer, the engine dynamometer and the actual driving test is enabled.

• Design Features

Data measurement and recordingData such as smoke density, engine RPM, temperature of engine oil can be transmitted to a PC for a continuous recording. Continuous use on the road for irregular checks, for visiting tests or for driving tests is enabled without a main power.

Controller Installation, moving and measurement is easy any where. Key buttons at the front panel ensure user-friendliness.

DisplayUse of a graphic LCD ensures easy read-outs. Help is provided with the measurement values. Brightness can be adjusted for night use.

The test mode OP-160 Design Features OP-160 The Measuring Unit Model. OP-160

Diesel smoke tester / OP-160, OP-160EOpacimeter

Diesel Smoke Tester

Opacimeter

Gas Analyzer

B-806, TWINTECH, 345-9 GASAN DONG, GEUMCHEON GU, SEOUL, KOREA.(Tel)+82-2-838-6300 (Fax)+82-2-6292-6292/+82-2-839-4700E-mail : export@koeng.com

http://www.koeng.com Koeng Co., Ltd.

Koeng Co., Ltd.

• The manufacture reserves the right to change the product specifications without notice and liability.

RPM Measurement (Optional)It measures the revolution of engines by use of an acoustic sensor that is chosen and suitable for local vehicles.

Oil Temperature Measurement (Optional) The measured values of smoke may vary by the temperature of engine oil. For accuracy, the oil temperature is measured.

Portability and simple installationOP-160 is easy to install, easy to use, and by attaching a wheeled base to the measuring part it is easy to carry.

The product can be used in a harsh climate (such as at the temperature of -10°C) to conform to the local environment regulations and the local climates. A special feature by the patent technology is implemented to heat up the anti-pollution air to 80°C and the sampling line to 180°C.It offers excellent logic in diagnosis of veering in probes by measuring the sample gas temperate inside the chamber.

Selectable DisplayDisplay options are available to cater for various measurement envi-ronments. The hand-terminal enables one person to install and test simultaneously.

Display unit (Type A) The hand terminal for checks at any time -Vehicle number, telephone number, chassis number can be entered by use of the remote controller.-Korean, English and numbers are entered in the same way as for a mobile phone.-A built-in compact printer is provided (as default).-Time and date of measurement can be shown on the printed output.-One can conduct test on his own on the driver’s seat.-Data including vehicle information, test results and time is saved as a set of information .-999 sets of measurements can be saved.-Additional data storage is enabled by connecting to a PC.-Suitable for irregular checks at any time.

Display unit (Type B)-Such data as vehicle number, telephone number, chassis number can be entered.-A compact printer supporting both Korean and English can be con-nected to the product (optional)-Time and date of measurement can be shown on the printed output.-10 measurement results can be saved.-The measurement results can be shown in graph as the product uses the 320*240 pixel graphic LCD. -Suitable for precise test centers and R&D centers.

AccuracyThe zero drift and the linearity conform to 0.1% which is stricter than the international standard (of ‘less than 1%’). It is trouble free in aspects of reliability and repeatability.

Design Features OP-160

Special Features OP-160

Example of an outdoor use

B

Light source Light emitting diode of 563nmDetector Silicon photodiodeDisplay Graphic LCD to one decimal placeAccuracy 0.1%Measuring range 0.0 ~ 100.0%The2ndBessel response 1.0 secondPhysical response 0.01 secondZero drift 0.1 ~ 0.2%Thermal stability 0.1 ~ 0.2%Warm-up tim eLess than 3 minutesRecord output 0~4 voltPower 220V AC, 12V DC (optional)

Display type is selectable A or B

Model for engine Generator

Model. OP-160E

A