Staggs and Fisher Consulting Engineers, Inc

3264 Loch Ness DriveLexington, Kentucky 40517Phone 859-271-3246Fax 859-271-3246Email info@sfengineering.com

The following comments are in response to Staggs and Fisher’s review of the attached shop drawing submittal.

Description of Submittal:

Job Name:

Job No:

Date:

Reviewed By:

Gregory G. Carter, P.E. Daniel H. Bransom, P.E.

Christopher C. Keath, P.E.John R. Mason, P.E. William P. Wilson, P.E. Greg W. Kraeszig, P.E.

Member of the Consulting Engineers Council

Remarks (if applicable):

X REVIEWED FURNISH AS CORRECTED

REJECTED REVISE AND RESUBMIT

DATE:

Checking is only for general conformance with the design concept of the project and general compliance with the information given in the contract documents. Any action shown is subject to the requirements of the drawings and specification. Contractor is responsible for : Quantities, dimensions which shall be confirmed and correlated at the job site, and fabrication processes and techniques of construction.

BY: _______________________________________________

Medium Voltage Cables

UK Chemistry Physics - Replace Existing Switchgear

13522

May 19, 2017

Bill Wilson

May 19, 2017

UK CHEMISTRY PHYSICS

SWITCHGEAR REPLACEMENT

CCK-2200-17

CONTRACTOR: GLENWOOD ELECTRIC INC.

SPEC SECTION: Spec. Section: 260513

Medium Voltage Cables

5/12/2017

Phone: 888-593-3355www.generalcable.com

Product Construction:Conductor:

• 2 AWG thru 1000 kcmil annealed bare copper compact Class B strand

Extruded Strand Shield (ESS):• Extruded thermoset semi-conducting stress-

control layer over conductor

Insulation: • Lead-free Ethylene Propylene Rubber (EPR)

insulation, contrasting in color to the black semi-conducting shield layers

Extruded Insulation Shield (EIS):• Thermoset semi-conducting polymeric layer free

stripping from insulation

Metallic Shield:• 5 mil annealed copper tape with an

overlap of 25%

Jacket:• Flame-retardant, moisture- and sunlight-resistant

Chlorinated Polyethylene (CPE)

Print:• GENERAL CABLE® (PLANT OF MFG) (MO/YR

OF MANUFACTURE) LIGHTNING BOLT SYMBOL 1/C SIZE (AWG OR KCMIL) COMPACT CU UNIBLEND® XLF CPE JKT (INSULATION

Print (cont’d.): THICKNESS) EPR TYPE MV-105 (VOLTAGE) KV%

INSULATION LEVEL SUN RES FOR CT USE (UL) SEQUENTIAL FOOTAGE MARK

* Sizes smaller than 1/0 AWG do not include “FOR CT USE”.

Options:• STRANDFILL® – blocked conductor. Tested in

accordance with ICEA T-31-610

Applications:• Superior performance in petrochemical plants,

pulp and paper mills, sewage and water treatment plants, environmental protection systems, railroads, mines, utility power generating stations, steel mills, textile plants and other industrial three-phase applications

• For use in wet or dry locations when installed in accordance with NEC

• For use in aerial, conduit, open tray and underground duct installations

• For use in direct burial if installed in a system with a ground conductor that is in close proximity, and conforms with NEC 250.4(A)(5)

Features:• Rated at 105˚C• Excellent heat and moisture resistance• Excellent flame resistance• Outstanding corona resistance

Features (cont’d.):• Flexibility for easy handling• Low friction for easy pulling• High dielectric strength• Low moisture absorption• Electrical stability under stress• Low dielectric loss• Chemical-resistant• Meets cold bend test at -35˚C• 105°C rating for continuous operation• 140°C rating for emergency overload conditions• 250°C rating for short circuit conditions

Compliances:• National Electrical Code (NEC)• UL 1072• ICEA S-93-639/NEMA WC74 • ICEA S-97-682• AEIC CS8• UL listed as Type MV-105 for use in accordance

with NEC, UL File # E90501• UL 1685 (Sizes 1/0 AWG and larger) UL Flame

Exposure Test• Sizes 1/0 AWG and larger are listed and marked

“Sunlight-Resistant FOR CT USE” in accordance with NEC

• IEEE 1202 (70,000 BTU/hr)/CSA FT4• EPA 40 CFR, Part 261 for leachable lead content

per TCLP method• OSHA Acceptable• RoHS Compliant

Packaging:• Material cut to length and shipped on non-

returnable wood reels. Lengths in excess of 10,000 lbs. are provided on returnable steel reels that require a deposit

• Extra charges apply for cuts less than 1000 ft., lagging, pulling eyes, paralleling and triplexing

SPEC 6375September, 2015

Uniblend® CPE High SpeedEPR/Copper Tape Shield/CPE, Medium-Voltage Power, Shielded 15 kV, UL Type MV-105, 133% Ins. Level, 220 Mils

CATALOG NUMBER

COND. SIZE

(AWG/ kcmil)

NOMINAL CONDUCTOR DIAMETER

INSULATION DIAMETER

INCHESNOMINAL JACKET

THICKNESS

NOMINAL CABLE

COPPER WEIGHT

AMPACITY

CONDUIT SIZING (4) (INCHES)

DIAMETER WEIGHTCONDUITIN AIR (1)

UNDERGROUND DUCT (2) TRAY (3)

INCHES MIN. MAX. INCHES mm INCHES mm LBS/1000 FT kg/km LBS/1000 FT kg/km 90˚C 105˚C 90˚C 105˚C 90˚C 105˚C

15 kV¥, UL TYPE MV-105, 133% INS. LEVEL, 220 MILS

17131.130205 2 0.27 0.710 0.800 0.080 2.03 0.99 25.14 655 975 276 411 150 165 155 165 - - 317131.130105 1 0.31 0.745 0.830 0.080 2.03 1.02 25.91 730 1086 332 494 170 190 175 185 - - 3.517131.135105 1/0 0.34 0.780 0.865 0.080 2.03 1.06 26.92 820 1220 403 600 195 215 200 215 195 220 3.517131.135205 2/0 0.38 0.820 0.905 0.080 2.03 1.10 27.94 933 1388 492 732 225 255 230 245 225 250 3.517131.135305* 3/0 0.43 0.865 0.955 0.080 2.03 1.14 28.95 1072 1595 603 897 260 290 260 275 260 290 3.517131.135405 4/0 0.48 0.920 1.005 0.080 2.03 1.21 30.73 1248 1857 743 1105 295 330 295 315 300 335 417131.136005 250 0.53 0.970 1.060 0.080 2.03 1.25 31.75 1402 2086 866 1289 330 365 325 345 335 370 417131.136205 350 0.62 1.070 1.155 0.080 2.03 1.35 34.29 1778 2646 1184 1761 395 440 390 415 415 460 517131.136505 500 0.74 1.190 1.275 0.080 2.03 1.47 37.34 2325 3460 1657 2466 480 535 465 500 515 575 517131.137005 750 0.91 1.370 1.460 0.080 2.03 1.65 41.91 3250 4836 2445 3638 585 655 565 610 665 745 617131.637505 1000 1.06 1.520 1.610 0.110 2.79 1.86 47.24 4209 6263 3228 4803 675 755 640 690 795 890 6

Dimensions and weights are nominal. Subject to industry tolerances.* Non-stock item; minimum runs apply. Please consult Customer Service for price and delivery.(1) Ampacities are in accordance with Table 310.60(C)(73) of the NEC for triplexed or three single conductor copper cables in isolated conduit in air based on a conductor temperature of 90˚C (194˚F) or 105˚C (221˚F), temperature denoted in column header, and an ambient air temperature of 40˚C (104˚F).(2) Ampacities are in accordance with Table 310.60(C)(77) of the NEC for triplexed or three single conductor copper cables in underground ducts (three conductors per duct), based on a conductor temperature of 90˚C (194˚F) or 105˚C (221˚F), temperature denoted in column header, and an ambient earth temperature of 20˚C (68˚F), electrical duct arrangement per Figure 310.60 Detail 1, 100% load factor, and earth thermal resistance (rho) of 90.(3) Ampacities are based on single conductor Type MV-105 sizes #1/0 AWG and larger in an uncovered tray in accordance with Section 392.80(B)(2) of the NEC at an ambient air temperature of 40˚C (104˚F) the ampacities are based on 75% of the values per Table 310.60(C)(69), operating temperature denoted in column header. For cable trays with unventilated covers for more than 6 feet, the ampacities shall not exceed 70% of the values per Table 310.60(C)(69).(4) Based on nominal cable diameters, three single cables in the duct (PVC Schedule 40) with no ground wire and a maximum of 40% fill. Jam ratio has been considered but should be checked for individual installations.¥ 100% insulation level is available upon request.Note: a) Sizes smaller than 1/0 AWG do not include “FOR CT USE”.

b) The NESC Lightning bolt symbol is on all Uniblend® constructions.

HIGH VOLTAGE TERMINATION (HVT-Z)FOR SHIELDED CABLES

• Co-extruded one-piece termination

* Built-in stress control

• As an option, the HVT-Z can also be ordered with TE’s new line of Aluminum ShearBolt Terminals.

• These are range taking mechanical connectors that will accommodate a conductor range from #2 compact to 1000 kcmil stranded, Class B.

KEY FEATURES TE Connectivity’s (TE) Raychem HVT-Z high voltage termination system features a new, co-extruded one-piece termination. The main termination component consists of the proven Raychem non-tracking tube together with a co-extruded stress control grading layer.

This stress control layer is based on ceramic semi-conductor technology (ZnO) and provides superior discharge and impulse performance. When the tubing is shrunk down, the coating softens and sticks to irregular surfaces, providing moisture seals as well as electrical stress control.

HVT-Z high-voltage terminations are fully qualified per IEEE-48 as Class I terminations to provide a long, trouble-free service life.

ENERGY /// HIGH VOLTAGE TERMINATION (HVT-Z)

Customers can count on consistent, high quality products, driven by TE’s proven innovation and backed by our extraordinary customer support.

High Voltage Termination (HVT-Z)

te.com/energy© 2014 TE Connectivity Ltd. family of companies. All Rights Reserved. E578 10/2014

Raychem, TE Connectivity and TE connectivity (logo) are trademarks. Other logos, product and/or company names might be trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information in this brochure, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications.

ENERGY /// HIGH VOLTAGE TERMINATION (HVT-Z)

PRODUCT SELECTION INFORMATION: DIMENSIONS IN INCHES (mm)Indoor Kit Outdoor Kit Conductor Size (min. - max.) Insulation Dia. (min. - max.) Jacket O.D. (max.)

For Copper Tape Shield, Wire Shield, UniShield, and Lead Sheath Cables

5/8 kV 5 kV (0.90'") 8 kV (0.115")

HVT-Z-80-G/SG - #4-#1 AWG #6-#2 AWG 0.35-0.60 (9-15) 0.95 (24)

HVT-Z-81-G/SG - 1/0 AWG-250 kcmil #1-4/0 AWG 0.60-0.95 (15-24) 1.20 (30)

HVT-Z-82-G/SG - 300-500 kcmil 250-500 kcmil 0.80-1.25 (20-32) 1.50 (38)

HVT-Z-83-G/SG - 600-1750 kcmil 600-1750 kcmil 1.10-1.75 (28-44) 2.10 (53)

HVT-Z-84-G/SG - 1500-3500 kcmil 1500-2500 kcmil 1.60-2.45 (41-62) 2.75 (70)

Installed Length 11.5" (295) Can be cut shorter for use with MCK kits No Skirts for Outdoor Operation

15 kV 15 kV (.175-.220")

HVT-Z-151-G HVT-Z-151-SG #4-1/0 AWG - 0.60-0.95 (15-24) 1.20 (30)

HVT-Z-152-G HVT-Z-152-SG 2/0 AWG-350 kcmil - 0.80-1.25 (20-32) 1.50 (38)

HVT-Z-153-G HVT-Z-153-SG 400-1000 kcmil - 1.10-1.75 (28-44) 2.10 (53)

HVT-Z-154-G HVT-Z-154-SG 1250-2500 kcmil - 1.60-2.45 (41-62) 2.75 (70)

Installed Length 11.5" (295) 1 Skirt for Outdoor Operation

25 kV/35 kV 25 kV (0.260") 35 kV (0.345")

HVT-Z-252/352-G HVT-Z-252/352-SG #2 AWG-250 kcmil #1-1/0 AWG 0.80-1.25 (20-32) 1.50 (38)

HVT-Z-253/353-G HVT-Z-253/353-SG 300-750 kcmil 2/0 AWG-500 kcmil 1.10-1.75 (28-44) 2.10 (53)

HVT-Z-254/354-G HVT-Z-254/354-SG 1000-2000 kcmil 750-1750 kcmil 1.60-2.45 (41-62) 2.75 (70)

Installed Length 19.0" (485) 4 Skirts for Outdoor Operation

Kits Include ShearBolt Terminal

5/8 kV 5 kV 8 kV

HVT-Z-81-G/SG-T5 - 1/0 AWG-250 kcmil #1-4/0 AWG 0.60-0.95 (15-24) 1.20 (30)

HVT-Z-82-G/SG-T5 - 300-350 kcmil 250-350 kcmil 0.80-1.07 (20-27) 1.50 (38)

HVT-Z-83-G/SG-T8 - 350-500 kcmil 350-500 kcmil 0.85-1.25 (22-32) 1.50 (38)

HVT-Z-84-G/SG-T9 - 600-1000 kcmil 600-1000 kcmil 1.10-1.40 (28-36) 2.10 (53)

Installed Length 11.5” (295) No Skirts for Outdoor Operation

15 kV 15 kV

HVT-Z-151-G-T5 HVT-Z-151-SG-T5 #2-1/0 AWG - 0.65-0.95 (17-24) 1.20 (30)

HVT-Z-152-G-T5 HVT-Z-152-SG-T5 2/0 AWG-350 kcmil - 0.80-1.25 (20-32) 1.50 (38)

HVT-Z-153-G-T8 HVT-Z-153-SG-T8 400-500 kcmil - 1.10-1.355 (28-34) 2.10 (53)

HVT-Z-153-G-T9 HVT-Z-153-SG-T9 600-1000 kcmil - 1.215-1.65 (32-42) 2.10 (53)

Installed Length 11.5” (295) 1 Skirt for Outdoor Operation

25 kV/35 kV 25 kV (0.260") 35 kV (0.345")

HVT-Z-252/352-G-T5 HVT-Z-252/352-SG-T5 #2 AWG-250 kcmil #1-1/0 AWG 0.80-1.25 (20-32) 1.50 (38)

HVT-Z-253/353-G-T5 HVT-Z-253/353-SG-T5 300-350 kcmil 2/0 AWG-350 kcmil 1.10-1.50 (28-38) 2.0 (51)

HVT-Z-253/353-G-T8 HVT-Z-253/353-SG-T8 350-750 kcmil 350-500 kcmil 1.185-1.70 (30-43) 2.10 (53)

HVT-Z-254/354-G-T9 HVT-Z-254/354-SG-T9 600-1000 kcmil 600-1000 kcmil 1.60-1.79 (41-45) 2.75 (70)

Installed Length 19.0” (485) 4 Skirts for Outdoor Operation

FOR MORE INFORMATION: TE Technical Support Centers

USA: + 1 800 327 6996France: + 33 380 583 200UK: + 44 0870 870 7500Germany: + 49 896 089 903Spain: + 34 916 630 400Benelux: + 32 16 351 731Canada: + 1 (905) 475-6222Mexico: + 52 (0) 55-1106-0800Latin/S. America: + 54 (0) 11-4733-2200China: + 86 (0) 400-820-6015

Tyco Electronics introduces a new one-piece 15 kV splice for use with solid dielectric cables, including copper tape shielded, wire shielded, UniShield shielded, and lead sheath power cables.

The requirements on today’s splicing technologies are high. Reliability, simple installations and cost effectiveness are the key requirements to achieving a dependable network. Cable accessories using Rayfit components are an excellent solution to fulfill these requirements.

Raychem Rayfit In-Line Heat Shrinkable Splices HVS-C-1520S & HVS-S-1520S1/C Shielded Cable 15 kV,

Energy Division

The base HVS-C-1520S series • accepts both copper and aluminum compression connectors.

HVS-C-152xS–M1 and M2 kits • include a range taking copper ShearBolt connector for use with copper conductor.

HVS-S-152xS-M (4-9) kits include • a range taking aluminum ShearBolt connector for use with aluminum or copper conductor. HVS-S-152x- M (4-9) kits are supplied with stress control shim tubes to increase the insulation diameter.

TestingAll HVS-C-1520S and HVS-S-1520 •

splices have been qualified to IEEE-404-2006 at 105˚C. (140˚C emergency operation) with the outer wraparound jacket removed for underwater load cycling.

Wraparound sleeve

Rayfit tube

FeaturesThis series of splices utilizes the new • triple-extrusion Rayfit splice sleeve.

This new sleeve provides high recovery forces resulting in superior interfacial pressure, reduced shrink and installation time, and a slimmer space saving profile.

Each kit contains all of the components • required for the complete joint assembly, excluding connectors, unless a –M kit

is ordered.

The installed length of the kit is greatly • reduced with the use of the Rayfit sleeve and a wraparound re-jacketing system.

Jacket Kit Required Conductor Insulation O.D. Connector Dimensions Installed InstallationCatalog Size Diameter (Max) Length O.D. Length SpaceNumber (AWG/kcmil) (Min-Max) A B C L M

HVS-S-1520S with Aluminum Mechanical ShearBolt ConnectorHVS-S-1522S-M4 #2 – 2/0 0.65 - 0.95 (17 - 24) 1.20 (30) 2.50 (65) .095 (24) 28.00 (700) 28.00 (700) HVS-S-1522S-M5 2/0 - 350 0.79 - 1.19 (20 - 30) 1.65 (42) 4.00 (100) 1.25 (30) 28.00 (700) 28.00 (700) HVS-S-1523S-M6 350 - 500 1.04 - 1.33 (26 - 34) 1.80 (45) 5.00 (125) 1.30 (34) 35.00 (870) 35.00 (870) HVS-S-1524S-M8 500 - 750 1.16 - 1.55 (29 - 39) 1.90 (48) 6.00 (150) 1.55 (40) 35.00 (870) 35.00 (870) HVS-S-1524S-M9 750 - 1000 1.35 - 1.70 (34 - 43) 2.30 (58) 8.00 (200) 1.75 (43) 35.00 (870) 35.00 (870)

Jacket Maximum Kit Required Conductor Insulation O.D. Connector Dimensions Installed InstallationCatalog Size Diameter (Max) Length O.D. Length SpaceNumber (AWG/kcmil) (Min-Max) A B C L M

HVS-C-1520S Without Connector HVS-C-1521S #2 – 2/0 0.65 - 0.95 (17 - 24) 1.20 (30) 4.00 (100) 0.80 (20) 28.00 (700) 28.00 (700)HVS-C-1522S 3/0 - 400 0.85 - 1.30 (23 - 33) 1.65 (42) 5.00 (125) 1.20 (30) 28.00 (700) 28.00 (700)HVS-C-1523S 500 - 750 1.10 - 1.55 (28 - 47) 1.90 (48) 6.00 (150) 1.45 (44) 35.00 (870) 35.00 (870)HVS-C-1524S 750 - 1000 1.30 - 1.90 (33 - 48) 2.30 (58) 8.00 (200) 1.85 (47) 35.00 (870) 35.00 (870)

Jacket Kit Required Conductor Insulation O.D. Connector Dimensions Installed InstallationCatalog Size Diameter (Max) Length O.D. Length SpaceNumber (AWG/kcmil) (Min-Max) A B C L M

HVS-C-1520S with Copper Mechanical ShearBolt ConnectorHVS-C-1522S-M1 3/0 - 400 0.85 - 1.30 (23 - 33) 1.20 (30) 4.0 (100) 1.20 (30) 28.00 (700) 28.00 (700)HVS-C-1523S-M2 500 - 750 1.10 - 1.55 (28 - 47) 1.45 (47) 5.0 (125) 1.45 (37) 35.00 (870) 35.00 (870)

Selection Information: Dimensions in Inches (millimeters)

Copyright 2006 - 2008 Tyco Electronics Corporation. All rights reserved. 2-1773453-5 E315 11/08

Tyco Electronics Corporation8000 Purfoy RoadFuquay Varina, NC 27526-9349Tel: 800.327.6996Fax: 800.527.8350E-mail: naenergy@tycoelectronics.comhttp://energy.tycoelectronics.com/hsspliceswww.tycoelectronics.com

All of the above information, including drawings, illustrations and graphic designs, reflects our present understanding and is to the best of our knowledge and belief correct and reliable. Users, however, should independently evaluate the suitability of each product for the desired application. Under no circumstances does this constitute an assurance of any particular quality or performance. Such an assurance is only provided in the context of our product specifications or explicit contractual arrangements. Our liability for these products is set forth in our standard terms and conditions of sale. ShearBolt, Rayfit, Raychem, TE logo, and Tyco Electronics are trademarks. UniShield is a trademark of BICC General Cable Industries, Inc.

Energy Division – a pioneer in the development of economical solutions for the electrical power industry. Our product range includes: Cable accessories, connectors & fittings, electrical equipment, instruments, lighting controls, insulators & insulation enhancement and surge arresters.

Ordering Information1. Select the appropriate catalog number. All selections are based on the typical dimensions for both 100 and 133% insulated cables, nominal insulation thickness 0.175-0.220".2. Use the insulation OD, and jacket OD range as the final ordering criteria.3. Kits can be installed with either aluminum or copper compression connectors (connectors not included with kit).4. If external grounding, order an HVS-EG kit.5. Standard package: 1 kit/box6. Related test reports EDR-5440 for HVS-C and test report EDR-5444 for HVS-S, IEEE 404-2006 and IEEE-48 draft 2008 for 105˚C of Splice and Terminations.7. For AL Mechanical ShearBolt connector information request datasheet 9-1773440-4 and for CU request 165972.

C

L

M

BA

M1 = CSBS-20C-500C-SOS M2 = CSBS-300C-750C-SOS

M4= ASBS-2-3/0M5= ASBS-2-350M6= ASBS-3/0-500M8= ASBS-500-750M9= ASBS-600-1000

SelectionInformation:DimensionsinInches(millimeters)

Catalog InsulationDiameter Lengthof BraidSizeNumber (Min.–Max.) Moisture-BlockedBraid (AWG)1/CcablesHVS-EG-1 0.30–1.25 (8–32) 24 (610) #8HVS-EG-2 1.00–2.15 (25–55) 24 (610) #6HVS-EG-3 1.55–3.40 (39–86) 24 (610) #43/CcablesHVS-EG-3-1 0.30–1.25 (8–32) 36 (914) #8HVS-EG-3-2 1.00–2.15 (25–55) 36 (914) #6HVS-EG-3-3 1.55–3.40 (39–86) 36 (914) #4

Elbows & Accessories

ELB-15/28-600 Series600/900 Amp 15/28 kV Class T-Body Elbow Connector

The Raychem ELB-15/28-600 and ELB-15/28-610 elbows are designed to terminate underground cables to high-voltage apparatus such as transformers and switchgear . They are fully shielded and fully submersible and meet the requirements of IEEE Standard 386 . They are interchangeable with other manufacturers products that conform with this industry standard .

They are designed for use on extruded (XLPE or EPR) solid dielectric cable. The conductor range is from 1/0 AWG to 1250 kcmil for aluminum or copper conductors with insulation diameters from .640" to 1 .965" . The ELB-15/28-610 elbow has a capacitive test point molded into the elbow body which provides a means of sensing voltage and provides an attachment point for test point fault indicators . 900A ratings can be achieved by ordering the kit with a copper shearbolt terminal .

As an option, the elbow can also be ordered with TE’s Aluminum or Copper ShearBolt Terminals . These are range taking mechanical connectors that will accommodate a conductor range from #2 compact to 1250 kcmil stranded, Class B .

The ShearBolt terminal design incorporates shear head bolts, which ensures that the correct torque is applied to each bolt and consequently the optimal contact force is generated to minimize connection resistance . Eliminating the need for crimp tooling and dies, they are therefore ideal when installation space is confined .

• Peroxide cured EPDM rubber ensures low tension set and high dielectric strength• 100% factory production tested for partial discharge and AC Hipot per IEEE 386 • Optional capacitive test point provided on elbow • Fits 15/28 kV cables up to 1250 kcmil• Molded semiconducting shield provides ground shield continuity per the requirements of IEEE 592• Meets IEEE 386-2006 specification requirements• 900A capability is available

Selection InformationThe part number for a 35 kV Elbow, 600 A with test point, an insulation OD of 1 .755”, and 750 kcmil stranded cable is ELB-35-610R750 . (Or with AL ShearBolt ELB-15/28-610K-A3)

Current Rating/Test Point 600 = 600 AMP WITHOUT

test point on T-Body610 = 600 AMP WITH test

point on T-Body

Cable Insulation O.D. RangeCode inches (mm) A .640- .760 (16 .3-19 .3)B .720- .845 (18 .3-21 .5)C .785- .970 (19 .9-24 .6) D .910-1 .065 (23 .1-27 .1)E .980-1 .140 (24 .9-29 .0)F 1 .080-1 .280 (27 .4-32 .5)G 1 .220-1 .420 (31 .0-36 .1)H 1 .360-1 .560 (34 .5-39 .6)J 1 .480-1 .700 (37 .6-43 .2)K 1 .640-1 .840 (41 .7-46 .7)L 1 .780-1 .965 (45 .2-49 .9)

ELB-15/28- 1 2 3

ELB Kit ContentsElbow, Insulating Plug*, Cable Adapter, Stud*, Connector*, Silicone Lubricant, Installation Instruction, Jacket Seal (optional) *When Copper ShearBolt is specified, kit will automatically include copper insulating plug and stud, therefore offering 900A capability.

Ordering Information1 . To include a sealing kit,

add “-ESA” suffix for heat-shrinkable and “-GES” suffix for cold applied Gelwrap ES closure .

2 . If using copper tape cable, accessory ELB-35-600-GRDx (x = 1, 2, or 3) is required and ordered separately .

4 . Related test reports: EDR-5482, EDR-5476, EDR-5502, EDR-5503 .

Conductor Size (Aluminum or Copper)Code Str/Comp Compact Solid1 1 1/0 1/02 2 2 210 1/0 2/0 2/020 2/0 3/0 3/030 3/0 4/0 4/040 4/0 250 —250 250 300 —300 300 350 —350 350 400 —400 400 450/500 —450 450 500/550 —500 500 600 —550 550 650 —600 600 700 —650 650 750/800 —750 700/750 900 —800 800 900 —900 900 1000 —1000 1000 — —1100 1100 — —1250 1250 — —

Aluminum ShearBolt | Conductor SizeCode Compression, Compact, Strand-A1 2-350 -A2 350-750 -A3 750-1000 -A4 1000-1250

Copper ShearBolt | Conductor SizeCode Compression, Compact, Strand-C1 2-4/0 -C2 4/0-500 -C3 500-750 -C4 750-1000 -C5 1000-1250

1 .50" (38 mm)

3 .23" (82 mm)

3 .20" (81 mm)

8 .10" (206 mm)

12 .70" (323 mm)

C_ELB_15_600

ME

DIU

M V

OLT

AG

E C

AB

LE

AC

CE

SS

OR

IES

RAYCHEM cable accessories ALR photocontrols AMP connectors 173 173

..A_._ TRAIIIING 1IISTInITE, IIIC.

·.ettit.'icate of COllJPletioC. This certificate is awarded to 'lJ

9vLarU. (j)ic~man in recognition of the successful completion of

.. Cable Testing and Fault Location, Medium Voltage

.1f}::J cm [k? t?Jl ~ S~ftJ,l C. Foute" Jose. Rafael CarriOo

Vice President of Operations Instructor

3.2 Continuing Education Units Dated: February 29-March 3,2016 NorristOWn, Pennsylvania

m JJWNIIIG wsmvr&, we.A___

ettiticate of· COUJpletioC This certificate is awarded to 'IJ.

::Mark,(j)ick,man in recognition of the successful completion of

Cable Splicing and Terminating, Medium Voltage

~cm L.L,(~ fJ~ Steven C. Foutch William A. Melvin

Vice President of Operations Instructor

3.2 Continuing Education Units Dated: April 12 -15. 2016 Norristown. Pennsylvania

._..­ etuticate of COllJPletio C This certificate is awarded to 'IJ

3.2 Continuing Education Units Dated: May 16-19,2016 Cleveland, Ohio

:JvlarkJ. (j)ictman in recognition of the successful completion of

Electrical Safety for Industrial Facilities

JE::)c ~-Steven C. Foutch

Q~/l~D gta;A. Baxter Vice President of Operations Instructor

.<IW¥,