Date issued Solicitation ClosesSolicitation Response · PDF fileDate issued Solicitation ClosesSolicitation Response Version Solicitation Response Purchasing Division 2019 Washington

Page : 1

Proc Folder :

Solicitation Description :

Proc Type :

Date issued Solicitation Closes Solicitation Response Version

Solicitation Response

Purchasing Division2019 Washington Street East

Charleston, WV 25305-0130Post Office Box 50130

State of West Virginia

357263

HARDWARE FOR IPT AND SAN INTEGRATION

Central Purchase Order

2017-09-06

13:30:00

SR 0613 ESR09011700000000817 1

VENDOR

000000210569

ALPHA TECHNOLOGIES INC

Comments:

Total Bid : Response Date: Response Time:Total Bid :

Solicitation Number: CRFQ 0613 VNF1800000004

$57,451.17 2017-09-01 11:03:57

FOR INFORMATION CONTACT THE BUYER

Signature on File FEIN # DATE

All offers subject to all terms and conditions contained in this solicitation

FORM ID : WV-PRC-SR-001

Crystal Rink

(304) [email protected]

Page : 2

Line Comm Ln Desc Qty Unit Issue Unit Price Ln Total Or Contract Amount

Comm Code Manufacturer Specification Model #

Extended Description :

1 CISCO ISR 4431 US BUNDLE,PVDM 4-64, UC LICENSE , CUBE 25

1.00000 EA $57,451.170000 $57,451.17

43211601

ALL ITEMS ARE "OR EQUAL"PLEASE SEE ATTACHED SPECS FOR MORE DETAILS

Comments: Lump Sum Price




2 8G EUSB FLASH MEMOR FORCISCO ISR 4430 OR EQUAL

1.00000 EA $0.000000 $0.00

43211601





3 4G DRAM (2G+2G) FOR CISCO ISR4400 OR EQUAL

1.00000 EA $0.000000 $0.00

43211601





4 2G DRAM (1DIMM) FOR CISCO ISR4400 DATA PLAN OR EQUAL

1.00000 EA $0.000000 $0.00

43211601


Page : 3




5 SNTC-8X5XNBD CISCO ISR 4431UC BU OR EQUAL

1.00000 EA $0.000000 $0.00

43211601





6 CONSOLE CABLE 6 FT WITH USBTYPE A AND MINI-B OR EQUAL

1.00000 EA $0.000000 $0.00

43211601





7 BLANK FACEPLATE FOR NIM SLOTON CISO ISR 4400 OR EQUAL

1.00000 EA $0.000000 $0.00

43211601





8 IP BASE LICENSE FOR CISCO ISR4400 SERIES OR EQUAL

1.00000 EA $0.000000 $0.00

43211601


Page : 4




9 PVDM4 64 CHANNEL TO 128CHANNEL FACTORY UPGRADE OR

1.00000 EA $0.000000 $0.00

43211601





10 2 PORT MULTIFLEX TRUNKVOICE/CLEAR-CHANNEL DATE

1.00000 EA $0.000000 $0.00

43211601





11 AC POWER SUPPLY FOR CISCOISR 4430 OR EQUAL

1.00000 EA $0.000000 $0.00

43211601





12 COVER FOR EMPTY 2ND PWRSUPPLY SLOT CISCO ISR4430 OR

1.00000 EA $0.000000 $0.00

43211601


Page : 5




13 AC POWER CORD NORTHAMERICA C13 NEMA 5-15P,2.1M

1.00000 EA $0.000000 $0.00

43211601





14 YELLOW CABLE ETHERNET,STRAIGHT THROUGH RJ-45 6FT

1.00000 EA $0.000000 $0.00

43211601





15 UNIFIED BORDER ELEMENTENTERPRISE LICENSE 25 SESS

25.00000 EA $0.000000 $0.00

43211601





16 UNIFIED COMMUNICATIONLICENSE FOR CISCO ISR 4400 OR

1.00000 EA $0.000000 $0.00

43211601


Page : 6




17 CISCO ISR4400 SERIES IOS XEUNIVERSAL OR EQUAL

1.00000 EA $0.000000 $0.00

43211601

ALL ITEMS ARE "OR EQUAL"PLEASE SEE ATTACHED SPECS FOR MORE DETAIL




18 COMMUNICATION MANAGEREXPRESS OR SRST- 25 SEATS OR

25.00000 EA $0.000000 $0.00

43211601





19 CISCO SURVIVABLE REMOTE SITETELEPHONY LICENSE OR EQUAL

1.00000 EA $0.000000 $0.00

43211601





20 2 PORT NETWORK INTERFACEMODULE - FXO (UNIVERSAL) OR

1.00000 EA $0.000000 $0.00

43211601


Page : 7




21 HP ARUBA 2920-48-G-POE+ 740WSWITCH OR EQUAL

12.00000 EA $0.000000 $0.00

43211601





22 PROLINE ARUBA SFP-SX-AUCOMPATIBLE SFP TAA OR EQUAL

12.00000 EA $0.000000 $0.00

43211601





23 3.3 FT. STACKING CABLE FORARUBA/HP SWITCHES OR EQUAL

12.00000 EA $0.000000 $0.00

43211601


© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 1 of 27

Data Sheet

Cisco Catalyst 2960-X Series Switches

Product Overview

Cisco® Catalyst

® 2960-X Series Switches are fixed-configuration, stackable Gigabit Ethernet switches that provide

enterprise-class access for campus and branch applications (Figure 1). Designed for operational simplicity to lower

total cost of ownership, they enable scalable, secure and energy-efficient business operations with intelligent

services and a range of advanced Cisco IOS® Software features.

Figure 1. A Cisco Catalyst 2960-X Series Switch Family

Product Highlights

Cisco Catalyst 2960-X switches feature:

● 24 or 48 Gigabit Ethernet ports with line-rate forwarding performance

● Gigabit Small Form-Factor Pluggable (SFP) or 10G SFP+ uplinks

● FlexStack Plus for stacking of up to 8 switches with 80 Gbps of stack throughput (optional)

● Power over Ethernet Plus (PoE+) support with up to 740W of PoE budget

● 24-port PoE fanless switch for deployment outside the wiring closet

● Reduced power consumption and advanced energy management features

● USB and Ethernet management interfaces for simplified operations

● Application visibility and capacity planning with integrated Full (Flexiable) NetFlow and NetFlow-Lite

● LAN Base or LAN Lite Cisco IOS software features

● Enhanced limited lifetime warranty (E-LLW) offering next-business-day hardware replacement

● Identify, classify and control of trusted internal network traffic through Domain Name System as an

Authoritative Source (DNS-AS)

Cisco Catalyst 2960-XR models also offer:

● Power resiliency with optional dual field-replaceable power supplies

● IP Lite Cisco IOS software with dynamic routing and Layer 3 features


Switch Models and Configurations

Catalyst 2960-X switches include a single fixed power supply and are available with either the Cisco IOS LAN Base

or LAN Lite feature set. Catalyst 2960-XR switch models include a field-replaceable modular power supply and can

accommodate a second power supply. Catalyst 2960-XR is available only with the Cisco IOS IP Lite feature set.

Table 1. Cisco Catalyst 2960-X Configurations

Model 10/100/1000 Ethernet Ports

Uplink Interfaces Cisco IOS Software Image

Available PoE Power

FlexStack-Plus Capability

Cisco Catalyst 2960X-48FPD-L 48 2 SFP+ LAN Base 740W Y

Cisco Catalyst 2960X-48LPD-L 48 2 SFP+ LAN Base 370W Y

Cisco Catalyst 2960X-24PD-L 24 2 SFP+ LAN Base 370W Y

Cisco Catalyst 2960X-48TD-L 48 2 SFP+ LAN Base - Y

Cisco Catalyst 2960X-24TD-L 24 2 SFP+ LAN Base - Y

Cisco Catalyst 2960X-48FPS-L 48 4 SFP LAN Base 740W Y

Cisco Catalyst 2960X-48LPS-L 48 4 SFP LAN Base 370W Y

Cisco Catalyst 2960X-24PS-L 24 4 SFP LAN Base 370W Y

Cisco Catalyst 2960X-24PSQ-L 24 (8PoE) 2 SFP, 2 10/100/1000BT

LAN Base 110W -

Cisco Catalyst 2960X-48TS-L 48 4 SFP LAN Base - Y

Cisco Catalyst 2960X-24TS-L 24 4 SFP LAN Base - Y

Cisco Catalyst 2960X-48TS-LL 48 2 SFP LAN Lite - -

Cisco Catalyst 2960X-24TS-LL 24 2 SFP LAN Lite - -

Table 2. Cisco Catalyst 2960-XR Configurations

Model 10/100/1000 Ethernet Ports

Uplink Interfaces Cisco IOS Software Image

Available PoE Power

Power Supply

Cisco Catalyst 2960XR-48FPD-I 48 2 SFP+ IP Lite 740W 1025WAC

Cisco Catalyst 2960XR-48LPD-I 48 2 SFP+ IP Lite 370W 640WAC

Cisco Catalyst 2960XR-24PD-I 24 2 SFP+ IP Lite 370W 640WAC

Cisco Catalyst 2960XR-48TD-I 48 2 SFP+ IP Lite - 250WAC

Cisco Catalyst 2960XR-24TD-I 24 2 SFP+ IP Lite - 250WAC

Cisco Catalyst 2960XR-48FPS-I 48 4 SFP IP Lite 740W 1025WAC

Cisco Catalyst 2960XR-48LPS-I 48 4 SFP IP Lite 370W 640WAC

Cisco Catalyst 2960XR-24PS-I 24 4 SFP IP Lite 370W 640WAC

Cisco Catalyst 2960XR-48TS-I 48 4 SFP IP Lite - 250WAC

Cisco Catalyst 2960XR-24TS-I 24 4 SFP IP Lite - 250WAC

Catalyst 2960-X Series Software Features

All Catalyst 2960-X Series Switches use a single Universal Cisco IOS Software Image for all SKUs. Depending on

the switch model, the Cisco IOS image automatically configures the LAN Lite, LAN Base, or IP Lite feature set.

LAN Lite models have reduced functionality and scalability for small deployments with basic requirements. Cisco

Catalyst 2960-X Family of Switches are available with the LAN Base and LAN Lite feature sets and Catalyst 2960-

XR Family of switches are available IP Lite feature sets.


Note that each switch model is tied to a specific feature level; LAN Lite cannot be upgraded to LAN Base and LAN

Base cannot be upgraded to IP Lite.

For more information about the features included in the LAN Lite, LAN Base and IP Lite feature sets, refer to Cisco

Feature Navigator: http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp.

Cisco ONE Software

Cisco ONE Software for Access Switching is available for the Cisco Catalyst 2960-X and Cisco Catalyst 2960-XR

Series Switches.

Cisco ONE Software is a new way for customers to purchase and use our infrastructure software. It offers a

simplified consumption model, centered on common customer scenarios in the data center, WANs, and LANs.

Cisco ONE Software and services provide customers with four primary benefits:

● Software suites that address typical customer use scenarios at an attractive price

● Investment protection of their software purchase through software services-enabled license portability

● Access to ongoing innovation and new technology with Cisco Software Support Service (SWSS)

● Flexible licensing models to smoothly distribute customer's software spend over time

For ordering information for Cisco ONE Software for the Cisco Catalyst 2960-X and Cisco Catalyst 2960-XR Series

Switches, go to http://www.cisco.com/c/en/us/products/software/one-access/switching-part-numbers.html.

Cisco Catalyst 2960-XR IP-Lite High-Performance Routing

The Cisco hardware routing architecture delivers extremely high-performance IP routing in the Cisco Catalyst

2960-XR IP-Lite Switches:

● IP unicast routing protocols (Static, Routing Information Protocol Version 1 [RIPv1], RIPv2, RIPng,

and EIGRP-Stub) are supported for network routing applications.

● Advanced IP unicast routing protocols (OSPF for Routed Access) are supported for load balancing and

constructing scalable LANs. IPv6 routing (OSPFv3) is supported in hardware for maximum performance.

● EIGRPv3-Stub and PIMv6-Stub are supported as a part of the IPv6 routing suite.

● Equal-cost routing facilitates Layer 3 load balancing and redundancy across the stack.

● Policy-based routing (PBR) allows superior control by facilitating flow redirection regardless of the routing

protocol configured (for both IPv4 and IPv6).

● Hot Standby Routing Protocol (HSRP) and Virtual Router Redundancy Protocol (VRRP) provides

dynamic load balancing and failover for routed links.

● Protocol Independent Multicast (PIM) for IP multicast is supported, including PIM sparse mode (PIM-SM),

PIM dense mode (PIM-DM), PIM sparse-dense mode and Source Specific Multicast (SSM).

http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp

http://www.cisco.com/c/en/us/products/collateral/software/one-access/datasheet-c78-733013.html

http://www.cisco.com/c/en/us/products/software/one-access/switching-part-numbers.html


Network Security

The Cisco Catalyst 2960-X Series Switches provide a range of security features to limit access to the network and

mitigate threats, including:

● MAC-based VLAN assignment enables different users to authenticate on different VLANs. This feature

enables each user to have a different data VLAN on the same interface.

● Cisco TrustSec® uses SXP to simplify security and policy enforcement throughout the network. For more

information about Cisco TrustSec security solutions, visit cisco.com/go/TrustSec.

● Comprehensive 802.1X Features to control access to the network, including Flexible Authentication,

802.1x Monitor Mode, and RADIUS Change of Authorization.

● IPv6 First-Hop Security enhances Layer-2 and Layer-3 network access from proliferating IPv6 devices

especially BYOD devices. It protects against rogue router advertisements, address spoofing, fake DHCP

replies and other risks introduced by IPv6 technology.

● Device Sensor and Device Classifier enable seamless versatile device profiles including BYOD devices.

They also enable Cisco Identity Services Engine (ISE) to provision identity based security policies. This

feature is available on both the 2960-X and the 2960-XR product families.

● Cisco Trust Anchor Technology enables easy distribution of a single universal image for all models of

Catalyst 2960-X by verifying the authenticity of IOS images. This technology allows the switch to perform

IOS integrity checks at boot-up by verifying the signature, verifying the Trusted Asset under Management

and authenticating the license.

● Cisco Threat Defense features including Port Security, Dynamic ARP Inspection, and IP Source Guard.

● Private VLANs restrict traffic between hosts in a common segment by segregating traffic at Layer 2, turning

a broadcast segment into a nonbroadcast multi access like segment. This feature is available in IP-Lite

feature set only.

◦ Private VLAN Edge provides security and isolation between switch ports, which helps ensure that users

cannot snoop on other users’ traffic.

● Unicast Reverse Path Forwarding (uRPF) feature helps mitigate problems caused by the introduction of

malformed or forged (spoofed) IP source address into a network by discarding IP packets that lack a

verifiable IP source address. This feature is available in IP-Lite feature set only.

● Multidomain Authentication allows an IP phone and a PC to authenticate on the same switch port while

placing them on appropriate voice and data VLAN.

● Access Control Lists (ACLs) for IPv6 and IPv4 for security and QoS ACEs.

◦ VLAN ACLs on all VLANs prevent unauthorized data flows from being bridged within VLANs.

◦ Router ACLs define security policies on routed interfaces for control-plane and data-plane traffic. IPv6

ACLs can be applied to filter IPv6 traffic.

◦ Port-based ACLs for Layer 2 interfaces allow security policies to be applied on individual switch ports.

● Secure Shell (SSH) Protocol, Kerberos, and Simple Network Management Protocol Version 3

(SNMPv3) provide network security by encrypting administrator traffic during Telnet and SNMP sessions.

SSH Protocol, Kerberos, and the cryptographic version of SNMPv3 require a special cryptographic software

image because of U.S. export restrictions.

http://www.cisco.com/go/trustsec


● Switched Port Analyzer (SPAN), with bidirectional data support, allows Cisco Intrusion Detection System

(IDS) to take action when an intruder is detected.

● TACACS+ and RADIUS authentication facilitates centralized control of the switch and restricts

unauthorized users from altering the configuration.

● MAC Address Notification allows administrators to be notified of users added to or removed from the

network.

● Multilevel security on console access prevents unauthorized users from altering the switch configuration.

● Bridge protocol data unit (BPDU) Guard shuts down Spanning Tree Port Fast-enabled interfaces when

BPDUs are received to avoid accidental topology loops.

● Spanning Tree Root Guard (STRG) prevents edge devices not in the network administrator’s control from

becoming Spanning Tree Protocol root nodes.

● IGMP filtering provides multicast authentication by filtering out nonsubscribers and limits the number of

concurrent multicast streams available per port.

● Dynamic VLAN assignment is supported through implementation of VLAN Membership Policy Server

client capability to provide flexibility in assigning ports to VLANs. Dynamic VLAN facilitates the fast

assignment of IP addresses.

Redundancy and Resiliency

Cisco Catalyst 2960-X Series Switches offer a number of redundancy and resiliency features to prevent outages

and help ensure that the network remains available:

● Cross-stack EtherChannel provides the ability to configure Cisco EtherChannel technology across

different members of the stack for high resiliency.

● Flexlink provides link redundancy with convergence time less than 100 milliseconds.

● IEEE 802.1s/w Rapid Spanning Tree Protocol (RSTP) and Multiple Spanning Tree Protocol (MSTP)

provide rapid spanning-tree convergence independent of spanning-tree timers and also offer the benefit of

Layer 2 load balancing and distributed processing. Stacked units behave as a single spanning-tree node.

● Per-VLAN Rapid Spanning Tree (PVRST+) allows rapid spanning-tree reconvergence on a per-VLAN

spanning-tree basis, without requiring the implementation of spanning-tree instances.

● Cisco Hot Standby Router Protocol (HSRP) is supported to create redundant, fail safe routing topologies

in 2960-XR IP-Lite SKUs.

● Switch-port auto-recovery (Error Disable) automatically attempts to reactivate a link that is disabled

because of a network error.

● Power redundancy with an optional second power supply on 2960-XR models, or with an external RPS on

2960-X models.

Enhanced Quality of Service

The Cisco Catalyst 2960-X Series Switches offers intelligent traffic management that keeps everything flowing

smoothly. Flexible mechanisms for marking, classification, and scheduling deliver superior performance for data,

voice, and video traffic, all at wire speed. Primary QoS features include:

● Up to eight egress queues per port and strict priority queuing so that the highest priority packets are

serviced ahead of all other traffic.


● Shaped Round Robin (SRR) scheduling and Weighted Tail Drop (WTD) congestion avoidance.

● Flow-based rate limiting and up to 256 aggregate or individual policers per port.

● 802.1p class of service (CoS) and Differentiated Services Code Point (DSCP) classification, with

marking and reclassification on a per-packet basis by source and destination IP address, MAC address, or

Layer 4 TCP/UDP port number.

● Cross-stack QoS to allow QoS to be configured across a stack of 2960-X series switches.

● The Cisco committed information rate (CIR) function provides bandwidth in increments as low as 8 Kbps.

● Rate limiting is provided based on source and destination IP address, source and destination MAC

address, Layer 4 TCP/UDP information, or any combination of these fields, using QoS ACLs (IP ACLs or

MAC ACLs), class maps, and policy maps.

Cisco Catalyst 2960-X Series Switching Database Manager

Switching database manager (SDM) templates for LAN Base and IP Lite licenses allows the administrator to

automatically optimize the ternary content-addressable memory (TCAM) allocation to the desired features based

on deployment-specific requirements. MAC, routing, security, and QoS scalability numbers depend on the type of

template used in the switch.

Please refer to the SDM template reference link for more information:

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960x/software/15-

0_2_EX/system_manage/configuration_guide/b_sm_152ex_2960-x_cg/b_sm_152ex_2960-

x_cg_chapter_0100.html.

Table 3. Cisco Catalyst 2960-X Family LAN Lite and LAN Base Scalability Numbers

Resources LAN Lite (Default) LAN Base (Default)

Unicast MAC Addresses 16K 16K

IPv4 Unicast Direct Routes 320 2K

IPv4 Unicast Indirect Routes 32 1K

IPv6 Unicast Direct Routes 256 2K

IPv6 Unicast Indirect Routes 0 1K

IPv4 Multicast Routes and IGMP Groups 1K 1K

IPv6 Multicast Groups 1K 1K

IPv4 QoS ACEs 384 500

IPv6 QoS ACEs 256 500

IPv4 Security ACEs 256 625

IPv6 Security ACEs 256 625

Table 4. Cisco Catalyst 2960-XR Family IP Lite Scalability Numbers

Resources Default (IP Lite) VLAN (IP Lite) IPv4 (IP Lite)

Unicast MAC Addresses 16K 32K 16K

IPv4 Unicast Direct Routes 4K 250 16K

IPv4 Unicast Indirect Routes 1.25K 250 8K

IPv6 Unicast Direct Routes 4K 250 0

IPv6 Unicast Indirect Routes 1.25K 250 0

IPv4 Multicast Routes and IGMP Groups

1K 1K 1K

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960x/software/15-0_2_EX/system_manage/configuration_guide/b_sm_152ex_2960-x_cg/b_sm_152ex_2960-x_cg_chapter_0100.html




Resources Default (IP Lite) VLAN (IP Lite) IPv4 (IP Lite)

IPv6 Multicast Groups 1K 1K 0

IPv4 QoS ACEs 500 500 500

IPv6 QoS ACEs 250 500 0

IPv4 Security ACEs 1K 1K 875

IPv6 Security ACEs 500 500 0

IPv4 Policy Based Routing ACEs

500 0 375

Cisco FlexStack-Plus

Cisco FlexStack-Plus provides stacking of up to eight 2960-X switches with the optional FlexStack-Plus module

(Figure 2).

The FlexStack-Plus module is hot swappable and can be added to any Cisco Catalyst 2960-X or Catalyst 2960-XR

with a FlexStack-Plus slot. Switches connected to a stack will automatically upgrade to the stack’s Cisco IOS

Software version and transparently join the stack without additional intervention.

Cisco FlexStack-Plus and Cisco IOS Software offer true stacking, with all switches in a stack acting as a single

switch unit. FlexStack-Plus provides a unified data plane, unified configuration, and single IP address for switch

management. The advantages of true stacking include lower total cost of ownership and higher availability through

simplified management as well as cross-stack features including EtherChannel, SPAN, and FlexLink.

To provide investment protection, FlexStack-Plus is backwards-compatible with FlexStack. Cisco Catalyst 2960-X

LAN Base switches equipped with a FlexStack-Plus module can be stacked with Catalyst 2960-S and 2960-SF

LAN Base switches equipped with a FlexStack module (see Table 5).

Table 5. FlexStack and FlexStack Plus Supported Combinations

2960-XR IP Lite 2960-X LAN Base 2960-S/SF LAN Base

2960-XR IP Lite Yes - -

2960-X LAN Base - Yes Yes

2960-S or 2960-SF LAN Base - Yes Yes

Table 6. FlexStack-Plus Scalability and Performance

Stack Members Stack Bandwidth Stack Limit Cisco IOS Feature Set

2960-XR IP Lite 80G 8 IOS IP Lite

2960-XLAN Base 80G 8 IOS LAN Base

2960-X LAN Base mixed with 2960-S/SF LAN Base

40G 4 IOS LAN Base


Figure 2. Cisco FlexStack-Plus Switch Stack

Power Supply

The Catalyst 2960-X switches comes with one fixed power-supply and options for an external redundant power

supply source (RPS2300).

The Catalyst 2960-XR switches support dual redundant power supplies. The Catalyst 2960-XR ships with one

power supply by default. The second power supply can be purchased at the time of ordering the switch or as a

spare. These power supplies have in-built fans to provide cooling.

Figure 3. 2960-XR Family Power Supply

The following table shows the different power supplies available in these switches and the available PoE power.

Table 7. 2960-XR Default Power Supply Configurations

Models Default Power Supply Available PoE Power

WS-C2960XR-24TS-I

WS-C2960XR-48TS-I

WS-C2960XR-24TD-I

WS-C2960XR-48TD-I

PWR-C2-250WAC -

WS-C2960XR-24PD-I

WS-C2960XR-48LPD-I

WS-C2960XR-24PS-I

WS-C2960XR-48LPS-I

PWR-C2-640WAC 370W

WS-C2960XR-48FPD-I

WS-C2960XR-48FPS-I

PWR-C2-1025WAC 740W


Intelligent Power over Ethernet Plus

Cisco Catalyst 2960-Xseries switches support both IEEE 802.3af Power over Ethernet (PoE) and IEEE 802.3at

PoE+ (up to 30W per port) to deliver lower total cost of ownership for deployments that incorporate Cisco IP

phones, Cisco Aironet® wireless access points, or other standards-compliant PoE/PoE+ end devices. PoE removes

the need to supply wall power to PoE-enabled devices and eliminates the cost of adding electrical cabling and

circuits that would otherwise be necessary in IP phone and WLAN deployments.

The Catalyst 2960-X series PoE power allocation is dynamic and power mapping scale up to a maximum of 740W

PoE+ power.

The 2960-XR switch configurations offer the additional benefit of dual redundant power supplies. If both power

supplies are used, then the 2960-XR shares the load between the two power supplies for nonstop power.

Table 8. 2960-X PoE and PoE+ Power Capacity

Switch Model Maximum Number of PoE+ (IEEE 802.3at) Ports

*

Maximum Number of PoE (IEEE 802.3af) Ports

*

Available PoE Power (Single PS Source)

Cisco Catalyst 2960X-48FPD-L 24 ports up to 30W 48 ports up to 15.4W 740W

Cisco Catalyst 2960X-48LPD-L 12 ports up to 30W 24 ports up to 15.4W 370W

Cisco Catalyst 2960X-24PD-L 12 ports up to 30W 24 ports up to 15.4W 370W

Cisco Catalyst 2960X-48FPS-L 24 ports up to 30W 48 ports up to 15.4W 740W

Cisco Catalyst 2960X-48LPS-L 12 ports up to 30W 24 ports up to 15.4W 370W

Cisco Catalyst 2960X-24PS-L 12 ports up to 30W 24 ports up to 15.4W 370W

Cisco Catalyst 2960X-24PSQ-L 3 ports up to 30W 7 ports up to 15.4W 110W

Cisco Catalyst 2960XR-48FPD-I 24 ports up to 30W 48 ports up to 15.4W 740W

Cisco Catalyst 2960XR-48LPD-I 12 ports up to 30W 24 ports up to 15.4W 370W

Cisco Catalyst 2960XR-24PD-I 12 ports up to 30W 24 ports up to 15.4W 370W

Cisco Catalyst 2960XR-48FPS-I 24 ports up to 30W 48 ports up to 15.4W 740W

Cisco Catalyst 2960XR-48LPS-I 12 ports up to 30W 24 ports up to 15.4W 370W

Cisco Catalyst 2960XR-24PS-I 12 ports up to 30W 24 ports up to 15.4W 370W

* Intelligent power management allows flexible power allocation across all ports.

Table 9. 2960-XR Available PoE and Switch Power Capabilities with Different Combinations of Power Supplies

Primary Power Supply Secondary Power Supply Available Power for PoE+ Switch Power Redundancy

Available PoE Power When One PS fails

PWR-C2-250WAC - - No -

PWR-C2-250WAC PWR-C2-250WAC - Yes -

PWR-C2-640WAC - 370W No -

PWR-C2-640WAC PWR-C2-640WAC 370W Yes 370W

PWR-C2-1025WAC - 740W No -

PWR-C2-1025WAC PWR-C2-1025WAC 740W Yes 740W


Application Visibility and Control

Catalyst 2960-X Series Switches support both Full (Flexible) NetFlow and NetFlow Lite, which enable IT teams

to understand the mix of traffic on their network and identify anomalies by capturing and recording specific packet

flows. NetFlow Lite supports flexible sampling of the traffic, and exports flow data in the NetFlow Version 9 format

for analysis on a wide range of Cisco and third-party collectors.

NetFlow Lite is included on all Catalyst 2960-X and 2960-XR LAN Base and IP Lite models.

Flexible NetFlow is the next generation in flow visibility technology, allowing optimization of the network

infrastructure, reducing operation costs, and improving capacity planning and security incident detection with

increased flexibility and scalability. The Catalyst 2960-X Series Switches are capable of up to 8000 flow entries in

hardware.

Full (Flexible) NetFlow is included on all Catalyst 2960-X and 2960-XR switches and requires a C1 Foundation

License per switch.

More details about Flexible NetFlow are available at

http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6555/ps6601/ps6965/product_data_sheet0900aecd

804b590b.html.

Domain Name System as an Authoritative Source (DNS-AS) feature (AVC with DNS-AS) provides a centralized

means of controlling the identification and classification of trusted network traffic in an organization. It accomplishes

this by using network metadata stored in a DNS server that is authoritative to the domain in question, to identify

applications, and Modular QoS CLI (MQC) to classify the corresponding traffic and apply suitable policies.

DNS-AS is included on all Catalyst 2960-X and 2960-XR and requires a C1 Foundation License per switch.

Cisco Catalyst SmartOperations

Cisco Catalyst SmartOperations is a comprehensive set of capabilities that simplify LAN planning, deployment,

monitoring, and troubleshooting. Deploying SmartOperations tools reduces the time and effort required to operate

the network and lowers total cost of ownership (TCO).

● Cisco AutoConfig services determine the level of network access provided to an endpoint based on the

type of the endpoint device. This feature also permits hard-binding between the end device and the

interface.

● Cisco Smart Install services enable minimal-touch deployment by providing automated Cisco IOS

Software image installation and configuration when new switches are connected to the network. This

enables network administrators to remotely manage Cisco IOS Software image installs and upgrades.

● Cisco Auto SmartPorts services enable automatic configuration of switch ports as devices connect to the

switch, with settings optimized for the device type resulting in zero-touch port-policy provisioning.

● Cisco Auto QoS is a service that automatic configuration of QoS that allows switch to manage QoS

policies based on traffic types resulting in zero-touch traffic engineering. Auto-QoS supports 8 egress

queues in both 2960-X and 2960-XR product families.

● Cisco Smart Troubleshooting is an extensive array of diagnostic commands and system health checks

within the switch, including Smart Call Home. The Cisco GOLD® (Generic Online Diagnostics) and Cisco

online diagnostics on switches in live networks help predicting and detecting failures faster.

For more information about Cisco Catalyst SmartOperations, visit cisco.com/go/SmartOperations.

http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6555/ps6601/ps6965/product_data_sheet0900aecd804b590b.html

http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6555/ps6601/ps6965/product_data_sheet0900aecd804b590b.html

http://www.cisco.com/go/smartoperations


Operational Simplicity Features

● Cisco AutoSecure provides a single-line CLI to enable base line security features (Port Security, DHCP

snooping, DAI). This feature simplifies security configurations with a single touch.

● Dynamic Host Configuration Protocol (DHCP) autoconfiguration of multiple switches through a boot

server eases switch deployment.

● Stacking master configuration management and Cisco FlexStack Plus technology helps ensure that all

switches are automatically upgraded when the master switch receives a new software version. Automatic

software version checking and updating help ensure that all stack members have the same software

version.

● Autonegotiation on all ports automatically selects half- or full-duplex transmission mode to optimize

bandwidth.

● Dynamic Trunking Protocol (DTP) facilitates dynamic trunk configuration across all switch ports.

● Port Aggregation Protocol (PAgP) automates the creation of Cisco Fast EtherChannel® groups or Gigabit

EtherChannel groups to link to another switch, router, or server.

● Link Aggregation Control Protocol (LACP) allows the creation of Ethernet channeling with devices that

conform to IEEE 802.3ad. This feature is similar to Cisco EtherChannel technology and PAgP.

● Automatic media-dependent interface crossover (MDIX) automatically adjusts transmit and receive pairs

if an incorrect cable type (crossover or straight-through) is installed.

● Unidirectional Link Detection Protocol (UDLD) and Aggressive UDLD allow unidirectional links caused

by incorrect fiber-optic wiring or port faults to be detected and disabled on fiber-optic interfaces.

● Switching Database Manager (SDM) templates for access, routing, and VLAN deployment allow the

administrator to easily maximize memory allocation to the desired features based on deployment-specific

requirements.

● Local Proxy Address Resolution Protocol (ARP) works in conjunction with Private VLAN Edge to

minimize broadcasts and maximize available bandwidth.

● VLAN1 minimization allows VLAN1 to be disabled on any individual VLAN trunk.

● Smart Multicast, with Cisco FlexStack-Plus technology, allows the Cisco Catalyst 2960-X Series to offer

greater efficiency and support for more multicast data streams such as video by putting each data packet

onto the backplane only once.

● Internet Group Management Protocol (IGMP) Snooping for IPv4 and IPv6 MLD v1 and v2 Snooping

provide fast client joins and leaves of multicast streams and limit bandwidth-intensive video traffic to only

the requestors.

● Multicast VLAN Registration (MVR) continuously sends multicast streams in a multicast VLAN while

isolating the streams from subscriber VLANs for bandwidth and security reasons.

● Per-port broadcast, multicast, and unicast storm control prevents faulty end stations from degrading

overall systems performance.

● Voice VLAN simplifies telephony installations by keeping voice traffic on a separate VLAN for easier

administration and troubleshooting.

● Cisco VLAN Trunking Protocol (VTP) supports dynamic VLANs and dynamic trunk configuration across

all switches.


● Remote Switch Port Analyzer (RSPAN) allows administrators to remotely monitor ports in a Layer 2

switch network from any other switch in the same network.

● For enhanced traffic management, monitoring, and analysis, the Embedded Remote Monitoring (RMON)

software agent supports four RMON groups (history, statistics, alarms, and events).

● Layer 2 trace route eases troubleshooting by identifying the physical path that a packet takes from source

to destination.

● Trivial File Transfer Protocol (TFTP) reduces the cost of administering software upgrades by downloading

from a centralized location.

● Network Timing Protocol (NTP) provides an accurate and consistent timestamp to all intranet switches.

Power Management

The 2960-X switches offer a range industry leading features for effective energy efficiency and energy

management. 2960-X Series are the greenest switches in the industry.

Switch Hibernation Mode (SHM) is an industry first and available on all 2960-X series switches. This feature puts

the switch in ultra low power mode during periods of non-operation such as nights or weekends. Switch

Hibernation Mode on the 2960-X switches can be scheduled using Cisco EnergyWise® compliant management

software.

IEEE 802.3az EEE (Energy Efficient Ethernet) enables ports to dynamically sense idle periods between traffic

bursts and quickly switch the interfaces into a low power idle mode, reducing power consumption.

Cisco EnergyWise policies can be used to control the power consumed by PoE-powered endpoints, desktop and

data-center IT equipment, and a wide range of building infrastructure. Cisco EnergyWise technology is included on

all Cisco Catalyst 2960-X Series Switches.

For more information about Cisco EnergyWise, visit cisco.com/go/energywise.

Network Management

The Cisco Catalyst 2960-XSeries Switches offer a superior CLI for detailed configuration and administration.

2960-X Series Switches are also supported in the full range of Cisco network management solutions.

Cisco Prime Infrastructure

Cisco Prime™

network management solutions provide comprehensive network lifecycle management. Cisco Prime

Infrastructure provides an extensive library of easy-to-use features to automate the initial and day-to-day

management of your Cisco network. Cisco Prime integrates hardware and software platform expertise and

operational experience into a powerful set of workflow-driven configuration, monitoring, troubleshooting, reporting,

and administrative tools.

For detailed information about Cisco Prime, visit cisco.com/go/prime.

Cisco Network Assistant

A Cisco network management application designed for small and medium-sized business (SMB) networks with up

to 250 users that runs on PCs, tablets and even smart phones, Cisco Network Assistant offers centralized network

management and configuration capabilities. This application also features an intuitive GUI where users can easily

apply common services across Cisco switches, routers, and access points.

For detailed information about Cisco Network Assistant, visit cisco.com/go/cna.

http://www.cisco.com/go/energywise

http://www.cisco.com/go/prime

http://www.cisco.com/go/cna


Security Management

Cisco Identity Services Engine (ISE) support enables the 2960-XR switches to offer security management for all

devices connected to it.

Figure 4. Fanless Quiet Cool 24-Port PoE Switch

The Cisco Catalyst 2960-X Series adds a new member to its 2960-X family, the WS-C2960X-24PSQ-L (Cool). This

is a 24-port 10M/100M/1000M switch that can power up to 8 ports of PoE (first eight ports only) with ability to

deliver a sum total of 110W of PoE power. This switch has four Gigabit Ethernet uplinks: two of them SFP and the

other two 10M/100M/1000M copper interfaces enabling choice of fiber or copper connectivity to the aggregation

point. This switch ships with the Cisco IOS LAN Base image.

Some important 2960-X “cool” switch highlights are:

● Extends a highly secure, intelligent, managed Cisco Catalyst infrastructure with a single Ethernet cable or

fiber from the wiring closet

● Support for advanced security and intelligent services, including NetFlow Lite and Switch Hibernation,

including voice, video, AP powering, and Cisco Enterprise Network services to remote endpoints

● Less than 12” depth fit in user work spaces where multiple cable runs could be challenging with very low

power consumption and heat dissipation

● Higher MTBF rates due to no moving mechanical parts, no fans help ensure that 2960X cool switch is

convenient to be used for colocated applications

● Easy to deploy using smart-install, configure with auto-smart-ports and device sensors and manage using

Cisco Prime or CNA

2960-X Cool Switch Use Cases Retail

Major retailers are increasingly moving customer-facing IP-based applications and services to the middle of the

sales floor or POS that is far away from their access router that connects the retail outlets to the outside network. A

typical retail outlet needs to serve customers at multiple sales points, each with a POS machine, phone, printer, or

video display with network and some PoE powering. Because of their quiet operation and ability to cater to up to 24

ports with flexible mounting options, these switches are ideally suited for mounting in confined spaces on the floor.

Education

The 2960X cool switch extends access to labs, classrooms, and other training rooms from the central/floor

distribution rooms, reducing cost of cabling and providing superior quality of service with enhanced security and

enterprise network features. Quiet operation and shallow depth make them ideally suited for classrooms or

confined areas nearby.


Defense

Defense establishments often look to an access switch that is portable in mobile units. These units require multiple

network access devices, some of them residing in inconvenient locations in the mobile unit that requires being

powered by the switch, reducing number of cables to that location and reducing possible failure sources. The

switch is expected to be very quiet and have longer MTBF rates, which is served by the 2960X cool switch.

Technical Specifications

Table 10. Cisco Catalyst 2960-X Series Hardware

Hardware Specifications

Flash memory 128 MB for LAN Base & IP Lite SKUs, 64 MB for LAN Lite SKUs

DRAM 512 MB for LAN Base and 256 MB for LAN Lite

CPU APM86392 600MHz dual core

Console Ports USB (Type-B), Ethernet (RJ-45)

Storage Interface USB (Type-A) for external flash storage

Network Management Interface 10/100 Mbps Ethernet (RJ-45)

Table 11. Cisco Catalyst 2960-X Series Performance

Performance and Scalability

2960-X LAN Lite 2960-X LAN Base 2960-XR IP Lite

Forwarding bandwidth 50 Gbps 108 Gbps 108 Gbps

Switching bandwidth* 100 Gbps 216 Gbps 216 Gbps

Maximum active VLANs 64 1023 1023

VLAN IDs available 4096 4096 4096

Maximum transmission unit (MTU)-L3 packet 9198 bytes 9198 bytes 9198 bytes

Jumbo frame - Ethernet frame 9216 bytes 9216 bytes 9216 bytes

* Switching bandwidth is full-duplex capacity.

Table 12. Cisco Catalyst 2960-X Series Forwarding Performance

Forwarding Rate: 64-Byte L3 Packets

Catalyst 2960-XFamily

Cisco Catalyst 2960X-48FPD-L 130.9 Mpps

Cisco Catalyst 2960X-48LPD-L 130.9 Mpps

Cisco Catalyst 2960X-24PD-L 95.2 Mpps

Cisco Catalyst 2960X-48TD-L 130.9 Mpps

Cisco Catalyst 2960X-24TD-L 95.2 Mpps

Cisco Catalyst 2960X-48FPS-L 107.1 Mpps

Cisco Catalyst 2960X-48LPS-L 107.1 Mpps

Cisco Catalyst 2960X-24PS-L 71.4 Mpps

Cisco Catalyst 2960X-24PSQ-L 71.4 Mpps

Cisco Catalyst 2960X-48TS-L 107.1 Mpps

Cisco Catalyst 2960X-24TS-L 71.4 Mpps

Cisco Catalyst 2960X-48TS-LL 104.2 Mpps

Cisco Catalyst 2960X-24TS-LL 68.5 Mpps


Forwarding Rate: 64-Byte L3 Packets

Catalyst 2960-XR Family

Cisco Catalyst 2960XR-48FPD-I 130.9 Mpps

Cisco Catalyst 2960XR-48LPD-I 130.9 Mpps

Cisco Catalyst 2960XR-24PD-I 95.2 Mpps

Cisco Catalyst 2960XR-48TD-I 130.9 Mpps

Cisco Catalyst 2960XR-24TD-I 95.2 Mpps

Cisco Catalyst 2960XR-48FPS-I 107.1 Mpps

Cisco Catalyst 2960XR-48LPS-I 107.1 Mpps

Cisco Catalyst 2960XR-24PS-I 71.4 Mpps

Cisco Catalyst 2960XR-48TS-I 107.1 Mpps

Cisco Catalyst 2960XR-24TS-I 71.4 Mpps

Table 13. Cisco Catalyst 2960-X Series Mechanical Specifications

Models

Dimensions Inches (H x D x W) Centimeters (H x D x W)

WS-C2960X-48FPD-L 1.75 x 14.5 x 17.5 4.5 x 36.8 x 44.5

WS-C2960X-48LPD-L 1.75 x 14.5 x 17.5 4.5 x 36.8 x 44.5

WS-C2960X-48TD-L 1.75 x 11.0 x 17.5 4.5 x 27.9 x 44.5

WS-C2960X-24PD-L 1.75 x 14.5 x 17.5 4.5 x 36.8 x 44.5

WS-C2960X-24TD-L 1.75 x 11.0 x 17.5 4.5 x 27.9 x 44.5

WS-C2960X-48FPS-L 1.75 x 14.5 x 17.5 4.5 x 36.8 x 44.5

WS-C2960X-48LPS-L 1.75 x 14.5 x 17.5 4.5 x 36.8 x 44.5

WS-C2960X-48TS-L 1.75 x 11.0 x 17.5 4.5 x 27.9 x 44.5

WS-C2960X-24PS-L 1.75 x 14.5 x 17.5 4.5 x 36.8 x 44.5

WS-C2960X-24PSQ-L 1.73 x 11.03 x 17.5 4.45 x 28.0 x 44.5

WS-C2960X-24TS-L 1.75 x 11.0 x 17.5 4.5 x 27.9 x 44.5

WS-C2960X-48TS-LL 1.75 x 11.0 x 17.5 4.5 x 27.9 x 44.5

WS-C2960X-24TS-LL 1.75 x 11.0 x 17.5 4.5 x 27.9 x 44.5

Weights Pounds Kilograms

WS-C2960X-48FPD-L 12.9 lbs 5.8 Kg

WS-C2960X-48LPD-L 12.9 lbs 5.8 Kg

WS-C2960X-48TD-L 9.6 lbs 4.3 Kg

WS-C2960X-24PD-L 12.7 lbs 5.7 Kg

WS-C2960X-24TD-L 8.9 lbs 4.0 Kg

WS-C2960X-48FPS-L 12.9 lbs 5.8 Kg

WS-C2960X-48LPS-L 12.9 lbs 5.8 Kg

WS-C2960X-48TS-L 9.4 lbs 4.2 Kg

WS-C2960X-24PS-L 12.8 lbs 5.8 kg

WS-C2960X-24PSQ-L 12.8 lbs 5.8 kg

WS-C2960X-24TS-L 8.9 lbs 4.0 kg

WS-C2960X-48TS-LL 8.9 lbs 4.0 kg

WS-C2960X-24TS-LL 8.2 lbs 3.7 kg


Table 14. Cisco Catalyst 2960-XR Series Mechanical Specifications

Models (The Power Supplies Could Add Up to 3.1” to the Depth of the 2960XR Chassis)

Dimensions Inches (H x D x W) Centimeters (H x D x W)

WS-C2960XR-48FPD-I 1.75 x 16.0 x 17.5 4.45 x 40.8 x 44.5

WS-C2960XR-48LPD-I 1.75 x 16.0 x 17.5 4.45 x 40.8 x 44.5

WS-C2960XR-48TD-I 1.75 x 16.0 x 17.5 4.45 x 40.8 x 44.5

WS-C2960XR-24PD-I 1.75 x 16.0 x 17.5 4.45 x 40.8 x 44.5

WS-C2960XR-24TD-I 1.75 x 16.0 x 17.5 4.45 x 40.8 x 44.5

WS-C2960XR-48FPS-I 1.75 x 16.0 x 17.5 4.45 x 40.8 x 44.5

WS-C2960XR-48LPS-I 1.75 x 16.0x 17.5 4.45 x 40.8 x 44.5

WS-C2960XR-48TS-I 1.75 x 16.0 x 17.5 4.45 x 40.8 x 44.5

WS-C2960XR-24PS-I 1.75 x 16.0 x 17.5 4.45 x 40.8 x 44.5

WS-C2960XR-24TS-I 1.75 x 16.0 x 17.5 4.45 x 40.8 x 44.5

Weights Pounds Kilograms

WS-C2960XR-48FPD-I 14.6 6.6

WS-C2960XR-48LPD- 14.0 6.4

WS-C2960XR-48TD-I 13.3 6.1

WS-C2960XR-24PD-I 13.6 6.2

WS-C2960XR-24TD-I 13.0 5.9

WS-C2960XR-48FPS-I 14.7 6.7

WS-C2960XR-48LPS-I 14.2 6.4

WS-C2960XR-48TS-I 13.2 6.0

WS-C2960XR-24PS-I 13.7 6.2

WS-C2960XR-24TS-I 13.0 5.9

Table 15. Cisco Catalyst 2960-X Series Environmental Specifications

Environmental Ranges

Fahrenheit Centigrade

Operating temperature up to 5000 ft (1500 m) 23ºF to 113ºF -5ºC to 45ºC

Operating temperature up to 10,000 ft (3000 m) 23ºF to 104ºF -5ºC to 40ºC

Short-term exception at sea level* 23ºF to 131ºF -5ºC to 55ºC

Short-term exception up to 5000 feet (1500 m)* 23ºF to 122ºF -5ºC to 50ºC

Short-term exception up to 10,000 feet (3000 m)* 23ºF to 113ºF -5ºC to 45ºC

Short-term exception up to 13,000 feet (4000 m)* 23º to 104ºF -5ºC to 40ºC

Storage temperature up to 15,000 feet (4573 m) -13º to 158ºF -25º to 70ºC

Feet Meters

Operating altitude Up to 10,000 Up to 3000

Storage altitude Up to 13,000 Up to 4000

Operating relative humidity 10% to 95% noncondensing

Storage relative humidity 10% to 95% noncondensing

Acoustic Noise

Measured per ISO 7779 and declared per ISO 9296. PoE output of 185W or less where applicable.

Bystander positions operating mode at 25°C ambient.



Model Sound Pressure Sound Power

LpA (Typical) LpAD (Maximum) LwA (Typical) LwAD (Maximum)

Cisco Catalyst 2960X-48FPD-L

Cisco Catalyst 2960X-48LPD-L

Cisco Catalyst 2960X-24PD-L

39 dB 43 dB 4.9 B 5.3 B

Cisco Catalyst 2960X-48TD-L

Cisco Catalyst 2960X-24TD-L

42 dB 46 dB 5.1 B 5.5 B

Cisco Catalyst 2960X-48FPS-L

Cisco Catalyst 2960X-48LPS-L

Cisco Catalyst 2960X-24PS-L

39 dB 43 dB 4.9 B 5.3 B

Cisco Catalyst 2960X-24PSQ-L N/A N/A N/A N/A

Cisco Catalyst 2960X-48TS-L

Cisco Catalyst 2960X-24TS-L

42 dB 46 dB 5.1 B 5.5 B

Cisco Catalyst 2960X-48TS-LL

Cisco Catalyst 2960X-24TS-LL

42 dB 46 dB 5.1 B 5.5 B

Cisco Catalyst 2960XR-48FPD-I 40dB 43dB 5.2B 5.5B

Cisco Catalyst 2960XR-48LPD-I 40dB 43dB 5.2B 5.5B

Cisco Catalyst 2960XR-24PD-I 40dB 43dB 5.2B 5.5B

Cisco Catalyst 2960XR-48TD-I 22dB 25dB 3.3B 3.6B

Cisco Catalyst 2960XR-24TD-I 22dB 25dB 3.3B 3.6B

Cisco Catalyst 2960XR-48FPS-I 40dB 43dB 5.2B 5.5B

Cisco Catalyst 2960XR-48LPS-I 40dB 43dB 5.2B 5.5B

Cisco Catalyst 2960XR-24PS-I 40dB 43dB 5.2B 5.5B

Cisco Catalyst 2960XR-48TS-I 22dB 25dB 3.3B 3.6B

Cisco Catalyst 2960XR-24TS-I 22dB 25dB 3.3B 3.6B

Predicted Reliability

Model MTBF in hours**

Cisco Catalyst 2960X-48FPD-L 233,370

Cisco Catalyst 2960X-48LPD-L 277,960

Cisco Catalyst 2960X-24PD-L 325,780

Cisco Catalyst 2960X-48TD-L 445,460

Cisco Catalyst 2960X-24TD-L 569,520

Cisco Catalyst 2960X-48FPS-L 232,610

Cisco Catalyst 2960X-48LPS-L 276,870

Cisco Catalyst 2960X-24PS-L 324,280

Cisco Catalyst 2960X-24PSQ-L 462,680

Cisco Catalyst 2960X-48TS-L 442,690

Cisco Catalyst 2960X-24TS-L 564,910

Cisco Catalyst 2960X-48TS-LL 476,560

Cisco Catalyst 2960X-24TS-LL 622,350

Cisco Catalyst 2960X-STACK 17,128,090

Cisco Catalyst 2960XR-48FPD-I 231,590

Cisco Catalyst 2960XR-48LPD-I 275,430

Cisco Catalyst 2960XR-24PD-I 322,740

Cisco Catalyst 2960XR-48TD-I 440,880



Cisco Catalyst 2960XR-24TD-I 561,890

Cisco Catalyst 2960XR-48FPS-I 230,860

Cisco Catalyst 2960XR-48LPS-I 274,380

Cisco Catalyst 2960XR-24PS-I 321,290

Cisco Catalyst 2960XR-48TS-I 438,130

Cisco Catalyst 2960XR-24TS-I 557,320

Cisco PWR-C2-250WAC 1,000,000



* Not more than the following in a 1-year period: 96 consecutive hours, or 360 hours total, or 15 occurrences.

** Currently estimates; Later will be Based on Telcordia SR-332 Issue 2 methodology.

Table 16. Connectors and Interfaces

Connectors and Interfaces

Ethernet Interfaces

● 10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling

● 100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling

● 1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling

● 1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling

SFP and SFP+ Interfaces

For information about supported SFP/SFP+ modules, refer to the Transceiver Compatibility matrix tables at cisco.com/en/US/products/hw/modules/ps5455/products_device_support_tables_list.html.

Indicator LEDs

● Per-port status: Link integrity, disabled, activity, speed, and full duplex

● System status: System, RPS, Stack link status, link duplex, PoE, and link speed

Stacking Interfaces

Cisco Catalyst 2960-XFlexStack-Plus stacking cables:

● CAB-STK-E-0.5M FlexStack-Plus stacking cable with a 0.5 m length

● CAB-STK-E-1M FlexStack-Plus stacking cable with a 1.0 m length

● CAB-STK-E-3M FlexStack-Plus stacking cable with a 3.0 m length

Console

Cisco Catalyst 2960-X console cables:

● CAB-CONSOLE-RJ45 Console cable 6 ft. with RJ-45

● CAB-CONSOLE-USB Console cable 6 ft. with USB Type A and mini-B connectors

Power

● The internal power supply is an auto-ranging unit and supports input voltages between 100 and 240V AC

● Use the supplied AC power cord to connect the AC power connector to an AC power outlet

● The Cisco RPS connector offers connection for an optional Cisco RPS 2300 that uses AC input and supplies DC output to the switch

● Only the Cisco RPS 2300 (model PWR-RPS2300) should be attached to the redundant-power-system receptacle

Table 17. Management and Standards Support

Category Specification

Management ● BRIDGE-MIB

● CISCO-CABLE-DIAG-MIB

● CISCO-CDP-MIB

● CISCO-CLUSTER-MIB

● CISCO-CONFIG-COPY-MIB

● CISCO-CONFIG-MAN-MIB

● CISCO-TC-MIB

● CICSO-TCP-MIB

● CISCO-UDLDP-MIB

● CISCO-VLAN-IFTABLE

● RELATIONSHIP-MIB

● CISCO-VLAN-MEMBERSHIP-MIB

http://www.cisco.com/en/US/products/hw/modules/ps5455/products_device_support_tables_list.html



● CISCO-DHCP-SNOOPING-MIB

● CISCO-ENTITY-VENDORTYPE-OID-MIB

● CISCO-ENVMON-MIB

● CISCO-ERR-DISABLE-MIB

● CISCO-FLASH-MIB

● CISCO-FTP-CLIENT-MIB

● CISCO-IGMP-FILTER-MIB

● CISCO-IMAGE-MIB

● CISCO-IP-STAT-MIB

● CISCO-LAG-MIB

● CISCO-MAC-NOTIFICATION-MIB

● CISCO-MEMORY-POOL-MIB

● CISCO-PAGP-MIB

● CISCO-PING-MIB

● CISCO-POE-EXTENSIONS-MIB

● CISCO-PORT-QOS-MIB

● CISCO-PORT-SECURITY-MIB

● CISCO-PORT-STORM-CONTROL-MIB

● CISCO-PRODUCTS-MIB

● CISCO-PROCESS-MIB

● CISCO-RTTMON-MIB

● CISCO-SMI-MIB

● CISCO-STP-EXTENSIONS-MIB

● CISCO-SYSLOG-MIB

● CISCO-VTP-MIB

● ENTITY-MIB

● ETHERLIKE-MIB

● IEEE8021-PAE-MIB

● IEEE8023-LAG-MIB

● IF-MIB

● INET-ADDRESS-MIB

● OLD-CISCO-CHASSIS-MIB

● OLD-CISCO-FLASH-MIB

● OLD-CISCO-INTERFACES-MIB

● OLD-CISCO-IP-MIB

● OLD-CISCO-SYS-MIB

● OLD-CISCO-TCP-MIB

● OLD-CISCO-TS-MIB

● RFC1213-MIB

● RMON-MIB

● RMON2-MIB

● SNMP-FRAMEWORK-MIB

● SNMP-MPD-MIB

● SNMP-NOTIFICATION-MIB

● SNMP-TARGET-MIB

● SNMPv2-MIB

● TCP-MIB

● UDP-MIB

● ePM MIB

● CISCO-FLEXSTACK-PLUS-MIB (2960-X)

For an updated list of supported MIBs, refer to the MIB Locator at cisco.com/go/mibs.

Standards ● IEEE 802.1D Spanning Tree Protocol

● IEEE 802.1p CoS Prioritization

● IEEE 802.1Q VLAN

● IEEE 802.1s

● IEEE 802.1w

● IEEE 802.1X

● IEEE 802.1ab (LLDP)

● IEEE 802.3ad

● IEEE 802.3af and IEEE 802.3at

● IEEE 802.3ah (100BASE-X single/multimode fiber only)

● IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports

● IEEE 802.3 10BASE-T

● IEEE 802.3u 100BASE-TX

● IEEE 802.3ab 1000BASE-T

● IEEE 802.3z 1000BASE-X

● RMON I and II standards

● SNMP v1, v2c, and v3

● IEEE 802.3az

● IEEE 802.3ae 10Gigabit Ethernet

● IEEE 802.1ax

RFC compliance ● RFC 768 - UDP

● RFC 783 - TFTP

● RFC 791 - IP

● RFC 792 - ICMP

● RFC 793 - TCP

● RFC 826 - ARP

● RFC 854 - Telnet

● RFC 951 - Bootstrap Protocol (BOOTP)

● RFC 959 - FTP

● RFC 1112 - IP Multicast and IGMP

● RFC 1157 - SNMP v1

● RFC 1166 - IP Addresses

● RFC 1256 - Internet Control Message Protocol (ICMP) Router Discovery

● RFC 1305 - NTP

● RFC 1492 - TACACS+

● RFC 1902-1907 - SNMP v2

● RFC 1981 - Maximum Transmission Unit (MTU) Path Discovery IPv6

● FRC 2068 - HTTP

● RFC 2131 - DHCP

● RFC 2138 - RADIUS

● RFC 2233 - IF MIB v3

● RFC 2373 - IPv6 Aggregatable Addrs

● RFC 2460 - IPv6

● RFC 2461 - IPv6 Neighbor Discovery

● RFC 2462 - IPv6 Autoconfiguration

● RFC 2463 - ICMP IPv6

● RFC 2474 - Differentiated Services (DiffServ) Precedence

● RFC 2597 - Assured Forwarding

● RFC 2598 - Expedited Forwarding

● RFC 2571 - SNMP Management

http://www.cisco.com/go/mibs



● RFC 1493 - Bridge MIB

● RFC 1542 - BOOTP extensions

● RFC 1643 - Ethernet Interface MIB

● RFC 1757 - RMON

● RFC 1901 - SNMP v2C

● RFC 2865 - RADIUS

● RFC 3046 - DHCP Relay Agent Information Option

● RFC 3376 - IGMP v3

● RFC 3580 - 802.1X RADIUS

Table 18. Voltage and Power Ratings

Input Voltage and Current

Model Voltage (Auto ranging) Current Frequency

Cisco Catalyst 2960X-48FPD-L 100 to 240 VAC 9A-4A 50 to 60Hz

Cisco Catalyst 2960X-48LPD-L 5A-2A

Cisco Catalyst 2960X-24PD-L 5A-2A

Cisco Catalyst 2960X-48TD-L 1A - 0.5A

Cisco Catalyst 2960X-24TD-L 1A to 0.5A

Cisco Catalyst 2960X-48FPS-L 9A - 4A

Cisco Catalyst 2960X-48LPS-L 5A - 2A

Cisco Catalyst 2960X-24PS-L 5A - 2A

Cisco Catalyst 2960X-24PSQ-L 2A - 4A

Cisco Catalyst 2960X-48TS-L 1A-0.5A

Cisco Catalyst 2960X-24TS-L 1A - 0.5A

Cisco Catalyst 2960X-48TS-LL 1A - 0.5A

Cisco Catalyst 2960X-24TS-LL 1A - 0.5A

Cisco Catalyst 2960XR-48FPD-I 100 to 240 VAC 10A to 5A 50 to 60Hz

Cisco Catalyst 2960XR-48LPD-I 6A to 3 A

Cisco Catalyst 2960XR-24PD-I 6A to 3 A

Cisco Catalyst 2960XR-48TD-I 1A to 0.5 A

Cisco Catalyst 2960XR-24TD-I 1A to 0.5 A

Cisco Catalyst 2960XR-48FPS-I 10A to 5 A

Cisco Catalyst 2960XR-48LPS-I 6A to 3 A

Cisco Catalyst 2960XR-24PS-I 6A to 3 A

Cisco Catalyst 2960XR-48TS-I 1A to 0.5 A

Cisco Catalyst 2960XR-24TS-I 1A to 0.5 A

Power Rating (Switch maximum consumption values)

Cisco Catalyst 2960X-48FPD-L 0.89 kVA

Cisco Catalyst 2960X-48LPD-L 0.48 kVA

Cisco Catalyst 2960X-24PD-L 0.47 kVA

Cisco Catalyst 2960X-48TD-L 0.049 kVA

Cisco Catalyst 2960X-24TD-L 0.034 kVA

Cisco Catalyst 2960X-48FPS-L 0.89 kVA

Cisco Catalyst 2960X-48LPS-L 0.49 kVA

Cisco Catalyst 2960X-24PS-L 0.49 kVA

Cisco Catalyst 2960X-24PSQ-L 0.16 kVA

Cisco Catalyst 2960X-48TS-L 0.051 kVA

Cisco Catalyst 2960X-24TS-L 0.039 kVA


Input Voltage and Current

Model Voltage (Auto ranging) Current Frequency

Cisco Catalyst 2960X-48TS-LL 0.46KVA

Cisco Catalyst 2960X-24TS-LL 0.035KVA

Cisco Catalyst 2960XR-48FPD-I 0.89KVA

Cisco Catalyst 2960XR-48LPD-I 0.48KVA

Cisco Catalyst 2960XR-24PD-I 0.46KVA

Cisco Catalyst 2960XR-48TD-I 0.047KVA

Cisco Catalyst 2960XR-24TD-I 0.039KVA

Cisco Catalyst 2960XR-48FPS-I 0.89KVA

Cisco Catalyst 2960XR-48LPS-I 0.47KVA

Cisco Catalyst 2960XR-24PS-I 0.46KVA

Cisco Catalyst 2960XR-48TS-I 0.046KVA

Cisco Catalyst 2960XR-24TS-I 0.038KVA

DC Input Voltages (RPS Input) - Only for 2960-X LAN Base Switches

12V 53V

Cisco Catalyst 2960X-48FPD-L 4A 15A

Cisco Catalyst 2960X-48LPD-L 4A 8A

Cisco Catalyst 2960X-24PD-L 3A 8A

Cisco Catalyst 2960X-48TD-L 4A N/A

Cisco Catalyst 2960X-24TD-L 3A N/A

Cisco Catalyst 2960X-48FPS-L 4A 15A

Cisco Catalyst 2960X-48LPS-L 4A 8A

Cisco Catalyst 2960X-24PS-L 3A 8A

Cisco Catalyst 2960X-24PSQ-L N/A N/A

Cisco Catalyst 2960X-48TS-L 5A N/A

Cisco Catalyst 2960X-24TS-L 4A N/A

Note: The wattage rating on the power supply does not represent actual power draw. It indicates the maximum

power draw possible by the power supply. This rating can be used for facility capacity planning. For PoE switches,

cooling requirements are smaller than total power draw as a significant portion of the load is dissipated in the

endpoints.

Table 19. Power Consumption1

Measured Power Consumption in Watts2

Model 0% Traffic3 10% Traffic 100% Traffic Weighted Average

Cisco Catalyst 2960X-48FPD-L 50.8 65.9 66.7 66.0

Cisco Catalyst 2960X-48LPD-L 45.7 61.1 62.0 61.2

Cisco Catalyst 2960X-24PD-L 44.7 52.3 53.1 52.3

Cisco Catalyst 2960X-48TD-L 32.9 47.0 47.8 47.1

1 Disclaimer: All power consumption numbers were measured under controlled laboratory conditions and are provided as estimates.

2 ATIS Methodology.

3 All Traffic measured with EEE enabled.


Measured Power Consumption in Watts2

Cisco Catalyst 2960X-24TD-L 24.9 32.2 33.1 32.3

Cisco Catalyst 2960X-48FPS-L 51.9 66.6 66.8 66.6

Cisco Catalyst 2960X-48LPS-L 46.7 60.8 61.1 60.9

Cisco Catalyst 2960X-24PS-L 41.4 49.0 49.2 49.0

Cisco Catalyst 2960X-24PSQ-L 28.5 32.8 34.8 33.0

Cisco Catalyst 2960X-48TS-L 34.9 49.5 49.7 49.5

Cisco Catalyst 2960X-24TS-L 28.0 36.8 37.1 36.9

Cisco Catalyst 2960X-48TS-LL 31.4 44.3 44.5 44.4

Cisco Catalyst 2960X-24TS-LL 25.2 32.0 32.0 32.0

Cisco Catalyst 2960XR-48FPD-I 46.7 61.8 62.5 61.9

Cisco Catalyst 2960XR-48LPD-I 40.7 54.6 55.9 54.8

Cisco Catalyst 2960XR-24PD-I 36.1 42.9 43.7 43.0

Cisco Catalyst 2960XR-48TD-I 29.7 44.7 45.6 44.8

Cisco Catalyst 2960XR-24TD-I 29.3 37.2 38.1 37.3

Cisco Catalyst 2960XR-48FPS-I 44.8 58.5 58.8 58.5

Cisco Catalyst 2960XR-48LPS-I 37.9 52.8 53.0 52.9

Cisco Catalyst 2960XR-24PS-I 36.5 43.2 43.4 43.2

Cisco Catalyst 2960XR-48TS-I 30.0 44.8 45.0 44.8

Cisco Catalyst 2960XR-24TS-I 28.8 36.0 36.2 36.0

Table 20. Safety and Compliance

Specification Description

Safety UL 60950-1 Second Edition

CAN/CSA-C22.2 No. 60950-1 Second Edition

EN 60950-1 Second Edition

IEC 60950-1 Second Edition

AS/NZS 60950-1

EMC - Emissions 47CFR Part 15 (CFR 47) Class A

AS/NZS CISPR22 Class A

CISPR22 Class A

EN55022 Class A

ICES003 Class A

VCCI Class A

EN61000-3-2

EN61000-3-3

KN22 Class A

CNS13438 Class A

EMC - Immunity EN55024

CISPR24

EN300386

KN24

Environmental Reduction of Hazardous Substances (RoHS) including Directive 2011/65/EU

Telco Common Language Equipment Identifier (CLEI) code

US Government Certifications USGv6 and IPv6 Ready Logo


Cisco Enhanced Limited Lifetime Hardware Warranty

Cisco Catalyst 2960-X Series Switches come with an enhanced limited lifetime warranty (E-LLW). The E-LLW

provides the same terms as Cisco’s standard limited lifetime warranty but adds next business day delivery of

replacement hardware, where available, and 90 days of 8X5 Cisco Technical Assistance Center (TAC) support.

Your formal warranty statement, including the warranty applicable to Cisco software, appears in the Cisco

information packet that accompanies your Cisco product. We encourage you to review carefully the warranty

statement shipped with your specific product before use.

Cisco reserves the right to refund the purchase price as its exclusive warranty remedy. For further information

about warranty terms, visit http://www.cisco.com/go/warranty.

Table 21. Warranty Terms

Cisco Enhanced Limited Lifetime Hardware Warranty

Device covered Applies to all Cisco Catalyst 2960-X Series Switches.

Warranty duration As long as the original end user continues to own or use the product.

End-of-life policy In the event of discontinuance of product manufacture, Cisco warranty support is limited to five (5) years from the announcement of discontinuance.

Hardware replacement Cisco or its service center will use commercially reasonable efforts to ship a Cisco Catalyst 2960-X replacement part for next business day delivery, where available. Otherwise, a replacement will be shipped within ten (10) working days after the receipt of the RMA request. Actual delivery times may vary depending on customer location.

Effective date Hardware warranty commences from the date of shipment to customer (and in case of resale by a Cisco reseller, not more than ninety [90] days after original shipment by Cisco).

TAC support Cisco will provide during customer's local business hours, 8 hours per day, 5 days per week basic configuration, diagnosis, and troubleshooting of device-level problems for up to 90 days from the date of shipment of the originally purchased Cisco Catalyst 2960-X product. This support does not include solution or network-level support beyond the specific device under consideration.

Cisco.com Access Warranty allows guest access only to Cisco.com.

Software Policy

Customers with Cisco Catalyst IP Lite, LAN Base and LAN Lite software feature sets will be provided with

maintenance updates and bug fixes designed to maintain the compliance of the software with published

specifications, release notes, and industry standards compliance as long as the original end user continues to own

or use the product or up to one year from the end-of-sale date for this product, whichever occurs earlier.

This policy supersedes any previous warranty or software statement and is subject to change without notice.

Technical Support and Services

Table 22. Technical Services Available for Cisco Catalyst 2960-X Series Switches

Technical Services

Cisco Smart Net Total Care™

Service

● Around-the-clock, global access to the Cisco TAC

● Unrestricted access to the extensive Cisco.com knowledge base and tools

● Next-business-day, 8x5x4, 24x7x4, or 24x7x2 advance hardware replacement and onsite parts replacement and installation available1

● Ongoing operating system software updates within the licensed feature set2

● Proactive diagnostics and real-time alerts on Smart Call Home enabled devices

http://www.cisco.com/go/warranty

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6406/product_data_sheet0900aecd80322c0c.html#wp9002122



Technical Services

Cisco Smart Foundation Service

● Next-business-day advance hardware replacement as available

● Access to SMB TAC during business hours (access levels vary by region)

● Access to Cisco.com SMB knowledge base

● Online technical resources through Smart Foundation Portal

● Operating system software bug fixes and patches

Cisco Smart Care Service

● Network-level coverage for the needs of small and medium-sized businesses

● Proactive health checks and periodic assessments of Cisco network foundation, voice, and security technologies

● Technical support for eligible Cisco hardware and software through Smart Care Portal

● Cisco operating system and application software updates and upgrades2

● Next-business-day advance hardware replacement as available, 24x7x4 option available1

Cisco SP Base Service

● Around-the-clock, global access to the Cisco TAC

● Registered access to Cisco.com

● Next-business-day, 8x5x4, 24x7x4, and 24x7x2 advance hardware replacement. Return to factory option available1

● Ongoing operating system software updates2

Cisco Focused Technical Support Services

Three levels of premium, high-touch services are available:

● Cisco High-Touch Operations Management Service

● Cisco High-Touch Technical Support Service

● Cisco High-Touch Engineering Service

Valid Cisco Smart Net Total Care or SP Base contracts are required on all network equipment

1 Advance hardware replacement is available in various service-level combinations. For example, 8x5xNBD indicates that shipment will be initiated during the standard 8-hour business day, 5 days a week (the generally accepted business days within the relevant region), with next-business-day (NBD) delivery. Where NBD is not available, same day shipping is provided. Restrictions apply; please review the appropriate service descriptions for details.

2 Cisco operating system updates include the following: maintenance releases, minor updates, and major updates within the licensed feature set.

Ordering Information

Table 23. Cisco Catalyst 2960-X Series Switches Ordering Information

Part Number 10/100/1000 Ethernet Interfaces

Uplink Interfaces Cisco IOS Software Feature Set

Available PoE Power

FlexStack-Plus Stacking

WS-C2960X-48FPD-L 48 2 SFP+ LAN Base 740W Optional

WS-C2960X-48LPD-L 48 2 SFP+ LAN Base 370W Optional

WS-C2960X-24PD-L 24 2 SFP+ LAN Base 370W Optional

WS-C2960X-48TD-L 48 2 SFP+ LAN Base - Optional

WS-C2960X-24TD-L 24 2 SFP+ LAN Base - Optional

WS-C2960X-48FPS-L 48 4 SFP LAN Base 740W Optional

WS-C2960X-48LPS-L 48 4 SFP LAN Base 370W Optional

WS-C2960X-24PS-L 24 4 SFP LAN Base 370W Optional

WS-C2960X-24PSQ-L 24 2 SFP, 2 10/100/1000BT

LAN Base 110W No

WS-C2960X-48TS-L 48 4 SFP LAN Base - Optional

WS-C2960X-24TS-L 24 4 SFP LAN Base - Optional

WS-C2960X-48TS-LL 48 2 SFP LAN Lite - No

WS-C2960X-24TS-LL 24 2 SFP LAN Lite - No




Table 24. Cisco Catalyst 2960-XR Configurations Ordering Information

Part Number 10/100/1000 Ethernet Interfaces

Uplink Interfaces

Cisco IOS Software Feature Set

Available PoE Power

Second FRU Power Supply Option

FlexStack-Plus Stacking

WS-C2960XR-48FPD-I 48 2 SFP+ IP Lite 740W 1025W Optional

WS-C2960XR-48LPD-I 48 2 SFP+ IP Lite 370W 640W Optional

WS-C2960XR-24PD-I 24 2 SFP+ IP Lite 370W 640W Optional

WS-C2960XR-48TD-I 48 2 SFP+ IP Lite - 250W Optional

WS-C2960XR-24TD-I 24 2 SFP+ IP Lite - 250W Optional

WS-C2960XR-48FPS-I 48 4 SFP IP Lite 740W 1025W Optional

WS-C2960XR-48LPS-I 48 4 SFP IP Lite 370W 640W Optional

WS-C2960XR-24PS-I 24 4 SFP IP Lite 370W 640W Optional

WS-C2960XR-48TS-I 48 4 SFP IP Lite - 250W Optional

WS-C2960XR-24TS-I 24 4 SFP IP Lite - 250W Optional

Table 25. Cisco Catalyst 2960-X Accessories

Part Numbers Description

C2960X-STACK FlexStack-Plus hot-swappable stacking module

CAB-STK-E-0.5M FlexStack-Plus stacking cable with a 0.5 m length

CAB-STK-E-1M FlexStack-Plus stacking cable with a 1.0 m length

CAB-STK-E-3M FlexStack-Plus stacking cable with a 3.0 m length

CAB-CONSOLE-RJ45 Console cable 6 feet with RJ45

CAB-CONSOLE-USB Console cable 6 feet with USB Type A and mini-B connectors

PWR-CLP Power cable restraining clip

RCKMNT-1RU-2KX= Spare rack-mount kit for Cisco Catalyst 2960-X and 2960-XR Series for 19-inch racks

RCKMNT-REC-2KX= 1 RU recessed rack-mount kit for Cisco Catalyst 2960-X and 2960-XR Series

Table 26. Cisco Catalyst 2960-X Redundant Power Supply Options


PWR-RPS2300 Cisco Redundant Power System 2300 and blower, no power supply

BLNK-RPS2300= Spare bay insert for Cisco Redundant Power System 2300 for Cisco Catalyst 2960 and Cisco Catalyst 2960-X switches

CAB-RPS2300-E= Spare RPS2300 cable for Cisco Catalyst 2960-X switches

BLWR-RPS2300= Spare 45 CFM blower for RPS 2300

C3K-PWR-750WAC= RPS 2300 750W AC power supply spare for Cisco Catalyst 2960-X

For more information about the RPS-2300, visit cisco.com/en/US/products/ps7130/index.html.

Table 27. Cisco Catalyst 2960-XR Power Supply Options


PWR-C2-250WAC4 Second FRU power supply and fan for all non-PoE 2960-XR switches, provides 250W AC of power

PWR-C2-640WAC4 Second FRU power supply and fan for all 370W PoE+ 2960-XR switches, provides 640W AC of power

PWR-C2-1025WAC4 Second FRU power supply and fan for all 740W PoE+ 2960-XR switches, provides 1025W AC of power

PWR-C2-250WAC= Spare FRU power supply and fan for all non-PoE 2960-XR switches, provides 250W AC of power

4 The first FRU power supply and fan module is configured automatically when the switch is ordered. The second redundant FRU power supply and fan module is an option while configuring the order.

http://www.cisco.com/en/US/products/ps7130/index.html



PWR-C2-640WAC= Spare FRU power supply and fan for all 370W PoE+ 2960-XR switches, provides 640W AC of power

PWR-C2-1025WAC= Spare FRU power supply and fan for all 740W PoE+ 2960-XR switches, provides 1025W AC of power

Table 28. Cisco Catalyst 2960-X and 2960-XR SFP/SFP+ Modules

SFP and SFP+ Modules

For the list of supported SFP and SFP+ modules, visit http://www.cisco.com/en/US/products/hw/modules/ps5455/products_device_support_tables_list.html.

Table 29. Power Cords for Cisco Catalyst 2960-X Product Family


CAB-16AWG-AC AC power cord, 16AWG

CAB-ACE AC power cord (Europe), C13, CEE 7, 1.5M

CAB-L620P-C13-US Power cord, 250VAC, 15A, NEMA L6-20 to C13, US

CAB-ACI AC power cord (Italy), C13, CEI 23-16, 2.5m

CAB-ACU AC power cord (UK), C13, BS 1363, 2.5m

CAB-ACA AC power cord (China/Australia), C13, AS 3112, 2.5m

CAB-ACS AC power cord (Switzerland), C13, IEC 60884-1, 2.5m

CAB-ACR AC power cord (Argentina), C13, EL 219 (IRAM 2073), 2.5m

CAB-ACC CORD, PWR, CHINA, 10A, IEC 320, C13 (APN=CS-PWR-CH)

CAB-JPN-12A CABASY, POWER CORD, JAPAN 2P, PSE, 12A @125VAC

CAB-L620P-C13-JPN Power cord, 250VAC, 15A, NEMA L6-20 to C13, JAPAN

CAB-IND Power cable for India

CAB-C15-ISR Power cable for Israel

CAB-ACSA Power cable for South Africa

CAB-AC15A-90L-US 15A AC power cord, left angle (United States)

CAB-ACE-RA Power cord Europe, right angle

CAB-ACI-RA Power cord Italian, right angle

CAB-ACU-RA Power cord UK, right angle

CAB-ACC-RA Power cord China, right angle

CAB-ACA-RA Power cord, Australian, right angle

CAB-ACS-RA Power cord for Switzerland, right angle

CAB-ACR-RA Power cord, Argentina, right angle

CAB-JPN-RA Power cord, Japan, right angle

CAB-C15-CBN Cabinet jumper power cord, 250 VAC 13A, C14-C15 connectors

CAB-ACBZ-12A AC power cord (Brazil) 12A/125V BR-3-20 plug for less than 12A device

Table 30. Power Cords for Cisco Catalyst 2960-XR Product Family


CAB-TA-NA= AC power cord for Cisco Catalyst 2960XR (North America)

CAB-TA-AP= AC power cord for Cisco Catalyst 2960XR (Australia)

CAB-TA-AR= AC power cord for Cisco Catalyst 2960XR (Argentina)

CAB-TA-SW= AC power cord for Cisco Catalyst 2960XR (Switzerland)

CAB-TA-UK= AC power cord for Cisco Catalyst 2960XR (United Kingdom)

CAB-TA-JP= AC power cord for Cisco Catalyst 2960XR (Japan)

http://www.cisco.com/en/US/products/hw/modules/ps5455/products_device_support_tables_list.html



CAB-TA-250V-JP= Japan 250VAC power cord for Cisco Catalyst 2960XR (Japan)

CAB-TA-EU= AC power cord for Cisco Catalyst 2960XR (Europe)

CAB-TA-IT= AC power cord for Cisco Catalyst 2960XR (Italy)

CAB-TA-IN= AC power cord for Cisco Catalyst 2960XR (India)

CAB-TA-CN= AC power cord for Cisco Catalyst 2960XR (China)

CAB-TA-DN= AC power cord for Cisco Catalyst 2960XR (Denmark)

CAB-TA-IS= AC power cord for Cisco Catalyst 2960XR (Israel)

CAB-C15-CBN= Cabinet jumper power cord, 250 VAC 13A, C14-C15 connectors

CAB-C15-CBN-JP= Japan Cabinet Jumper Power Cord, 250 VAC 13A, C14-C15

CAB-TA-JP-RA= Japan AC Right Angled Power Cord for Cisco Catalyst 2960XR

Contact Cisco

For more information about Cisco products, contact:

● Phone: +1 800 553-NETS (6387)

● Worldwide Product Support

● Company Website: cisco.com

Cisco Capital Financing to Help You Achieve Your Objectives

Cisco Capital can help you acquire the technology you need to achieve your objectives and stay competitive. We

can help you reduce CapEx. Accelerate your growth. Optimize your investment dollars and ROI. Cisco Capital

financing gives you flexibility in acquiring hardware, software, services, and complementary third-party equipment.

And there’s just one predictable payment. Cisco Capital is available in more than 100 countries. Learn more.

Printed in USA C78-728232-10 04/17

http://www.cisco.com/en/US/support/tsd_cisco_worldwide_contacts.html

http://www.cisco.com/

http://www.cisco.com/web/ciscocapital/americas/us/index.html

Documents

Date issued Solicitation ClosesSolicitation Response · PDF fileDate issued Solicitation ClosesSolicitation Response Version Solicitation Response Purchasing Division 2019 Washington