Data Sheet Electromagnetic Flowmeter D184S073U02 FSM4000...2004/02/07 · - Standardized installation lengths for DIN, ASME B16.5 or JIS B2210-10K flanges - Power supply AC/DC P R

Data Sheet D184S073U02

Electromagnetic FlowmeterFSM4000

Pos: 1 /Titelblätter / Copyright/DB/Durchfluss/FSM4000 @ 3\mod_1157697105687_3101.doc @ 40413

Function - Electromagnetic flowmeters can be used to

accurately measure the flowrate of liquids, slurries, pastes and sludges with an electrical conductivity of at least 20 µS/cm (opt. 5/0.5 µS/cm).

Applications - The system is specially designed to measure

liquids in the pulp & paper and food & beverage industries. It can be used to measure fast changing processes, two phase liquids, continuous and pulsating flows (piston pump application).

Benefits - Digital signal processing (DSP) and zero stability

ensure long-term stability and accuracy in both flow directions.

- Enhanced diagnostic functions and monitoring of coil and electrode circuits as well as magnetic field for increased operational stability. Verification via fingerprint.

Key features - Flowmeter sensor designed acc. to PED Directive

97/23 EC - Meter size DN 1 (1/25") ... DN 40 (4") - Accuracy < ± 0.5% of rate (> DN 2) - Fluid temperature -40 … 130 °C (-40 ... 266 °F)

(opt. 180 °C [356 °F]) - Hygienic certification: 3A, EHEDG - Liners, PFA, PTFE, hard or soft rubber - Standardized installation lengths for DIN, ASME

B16.5 or JIS B2210-10K flanges - Power supply AC/DC

P R O F I

B U S

PROCESS FIELD BUS

®

The all-purpose flowmeterfor conductive fluids

Pos: 2 /Inhaltsverzeichnis/Inhaltsverzeichnis für alle Dokumente @ 0\mod_1138710310890_3101.doc @ 3129 Contents

Electromagnetic Flowmeter FSM4000 D184S073U02

2

Contents 1 Overview of flowmeter sensor and transmitter designs .................................................................................3 2 General information ............................................................................................................................................4

2.1 Measuring accuracy .......................................................................................................................................4 2.2 Grounding.......................................................................................................................................................4 2.3 Installation Requirements...............................................................................................................................4 2.4 Flowmeter Sizes, Pressure Ratings, Flow Range..........................................................................................7 2.5 Flowmeter Sizes, Pressure Ratings, Flow Range..........................................................................................7 2.6 Flowrate nomograph ......................................................................................................................................8

3 Model SE41F ......................................................................................................................................................10 3.1 Technical data ..............................................................................................................................................10 3.2 Dimensional drawings ..................................................................................................................................13 3.3 Ordering information.....................................................................................................................................19

4 Model SE21_ ......................................................................................................................................................26 4.1 Technical data ..............................................................................................................................................26 4.2 Dimensional drawings ..................................................................................................................................28 4.3 Ordering information.....................................................................................................................................39

5 Mounting accessories.......................................................................................................................................42 6 Transmitter.........................................................................................................................................................43

6.1 Technical data ..............................................................................................................................................43 6.2 Inputs/outputs...............................................................................................................................................45 6.3 Digital communication ..................................................................................................................................45 6.4 Terminal connection diagrams .....................................................................................................................47 6.5 Connection examples for peripherals (incl. HART)......................................................................................51 6.6 Dimensional drawings ..................................................................................................................................54 6.7 Ordering information.....................................................................................................................................55

7 Order information: Wafer accessories (table H) ............................................................................................56 8 Order information: Flowmeter sensor simulator FXC 4000 ..........................................................................57


3

Pos: 3 /Technische Daten / Datenblatt/Durchfluss/FSM4000/Übersichten/Übersicht Aufnehmer und Messumformer @ 3\mod_1157623996796_3101.doc @ 39718

1 Overview of flowmeter sensor and transmitter designs

Housing Material Alumin. Hous. Series 4000 Stainless Steel Housing Series 2000

G00211

DN 3 ... 40 (1/10 . . 1 1/2").

DN 50 ... 10 0 (2 ... 4")0

G00210DN 3 ... 100 (1/10 ... 4")

G00209

DN 3 ... 40 (1/10 ... 1 1/2”)

DN 50 ... 100 (2 ... 4”)

G00208

1) 2)

3) 4)

DN 3 ... 40(1/10 . . 1 1/2").

DN 50 ... 100(2 ... 4")

Fixed Flange Fixed Flange Wafer design Variable Connections

Flowmeter sensor Model Number SE41F SE21F SE21W SE21_* Accuracy 0.5 % of rate (> DN 2) DN PN DN PN DN PN DN PN *

Wafer design - - 3 … 50 65 … 100 10 … 40 10 … 16

Flange DIN 2501/EN 1092-1 3 ... 1000 10 ... 40 3 … 100 10 … 40 - - Flange ASME B16.5 / B16.47 JIS B2210-10K

1/10 ... 40" 1/10 … 12“

CL 150 CL 300

1/10“ … 4“

CL150 … CL300/JIS

1/10“ … 2“3“ … 4“

CL300/JIS CL150/JIS

-

Pipe connection DIN 11851

- - - 3…40 (1/10...1 1/2“) 50, 80 (2“, 3“)

65, 100 (2 1/2“, 4“)

40 16 10

S S S

Weld stubs DIN 11850 - - - 3 … 40 (1/10...1 1/2“)

50, 80 (2“, 3“) 65, 100 (2 1/2“, 4“)

40 16 10

R R R

Weld stubs DIN 2463 / ISO 1127

- - - 3 … 40 (1/10...1 1/2“)50, 80 (2“, 3“)

65, 100 (2 1/2“, 4“)

40 16 10

Q/J Q/J Q/J

Weld stubs ISO 2037 / SMS - - - 25…40 (1...1 1/2“)

50, 80 (2“, 3“) 65, 100 (2 1/2“, 4“)

40 16 10

P/X P/X P/X

Tri-Clamp DIN 32676 / ASME BPE

- - - 3 … 50 (1/10...2“) 65, 100 (2 1/2“, 4“)

16/1010/10

T/K T/K

External threads ISO 228 / DIN 2999

- - - 3 …25 (1/10...1”) 16 E

1/8" sanitary connectors - - - 1 …2 (1/25...1/12”) 10 B

Liner Hard/soft rubber, PTFE, PFA, ETFE, other PFA (vacuum tight) PFA (vacuum tight) PEEK, Torlon (< DN 3)

PFA (> DN 2) Conductivity ≥ 20 µS/cm (optional ≥ 5/0.5 µS/cm) Electrodes SS 1.4571 (316 Ti), 1.4539 (904 L), Hastelloy B-3/C-4, Platinum-Iridium, Tantalum, Titanium

Process Connection Material Steel, SS 1.4571 (316 Ti) 1.4404 (316 L) - > DN 2: SS 1.4404 (316 L) < DN 3: 1.4571 (316 Ti), PVC, POMProtect. Class per EN 60529 IP 67 / IP 68 IP 67 / IP 68 IP 67 / IP 68 IP 67 / IP 68

Fluid Temperatures -25 ... 130 °C / 180 °C -13 ... 266 °F / 356 °F -40 ... 130 °C -40 ... 266 °F

-25 ... 130 °C -13 ... 266 °F

-25 ... 130 °C -13 ... 266 °F

Approvals Hygienic + sterile requirem. CIP/SIP-enabled 3A, EHEDG, CIP/SIP-enabled

Transmitter Model Number S4 Supply power 85 ... 253 V AC, 24 V AC/DC Current output 0/2 ... 10 mA, 0/4 ... 20 mA Pulse output active (24 V), optocoupler (220 mA) Ext. zero return yes Ext. totalizer reset yes Forward/Rev. Flow Metering yes Communication HART protocol, PROFIBUS PA, FOUNDATION Fieldbus Pipe empty detection std. yes, DN 10 or higher and ≥ 20 µS/cm Self-monitoring, enhanced diagnostic functions

yes , expanded diagnostic functions / fingerprint only in connection with flowmeters SE21, SE21F and SE41F for DN 10 or higher

On-site display/totalization yes Density correction yes, manual entry (totalize and display in mass units) Protect. Class per EN 60529 IP 67, NEMA 4X Housing Field housing unit

G00212

1) Weld stubs 2) Tri-Clamp 3) Threaded pipe connection 4) External threads Pos: 4 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830


4

Pos: 5 /==== Wechsel ein- auf zweispaltig ==== @ 0\mod_1130421847171_3101.doc @ 3828 Wechsel ein-auf zweispaltig Pos: 6 /Überschriften/1/A - C/Allgemeine Daten @ 0\mod_1132927923465_3101.doc @ 3133

2 General information Pos: 7 /Technische Daten / Datenblatt/Durchfluss/FSM4000/Allgemein/Messgenauigkeit @ 3\mod_1157629438861_3101.doc @ 39739

2.1 Measuring accuracy

2.1.1 Reference conditionsper EN 29104

Fluid Temperatures 20 °C (68 °F) ± 2 K Ambient temp. 20 °C (68 °F) ± 2 K Supply power Line voltage per type plate UN ± 1% Installation Conditions − upstream > 10 x DN

straight section − downstream > 5 x DN straight section DN = Flowmeter sensor size

Warm Up Phase 30 min

2.1.2 Maximum Measurement Error

Pulse output − DN 1 ... DN 2 (1/25 ... 1/12"):

± 1% of measured value, ± 0.001 QmaxDN − DN 3 ... DN 1000 (1/10 ... 40"):

Q > 0.05 QmaxDN ± 0.5% of measured value − Q < 0.05 QmaxDN ± 0.00025 QmaxDN QmaxDN = maximum flowrate for the flowmeter size 10 m/s Analog Output Effects Same as pulse output plus ±0.1% of rate ±0.01 mA

0 6,5 13,1 19,7 26,2 32,8 ft/s

G00456

0,0 %

1,0 %

2,0 %

3,0 %

4,0 %

5,0 %

6,0 %

0 2 4 6 8 10 m/s

DN 3...1000(1/10...40”)

DN 1...2(1/25...1/12”)

Y

X

Fig. 1 Y Accuracy ± of rate X Flow velocity

Pos: 8 /======= Spaltenumbruch ======== @ 0\mod_1132937966324_3101.doc @ 3831

Pos: 9 /Technische Daten / Datenblatt/Durchfluss/FSM4000/Allgemein/Erdung @ 11\mod_1184752201296_3101.doc @ 110913

2.2 Grounding

The grounding of the flowmeter sensor is necessary not only for safety reasons, but also to as sure proper operation of the electro-magnetic flowmeter. The ground screws on the flowmeter sensor are to be connected to earth potential. For technical reasons, this potential should be identical to the potential of the metering fluid, if possible. For plastic or insulated lined pipelines, the fluid is grounded by installing ground plates. When there are stray potentials present in the pipeline, a grounding plate is recommended on both ends of the meter sensor. For devices with hard rubber lining for DN 125 (5") and larger, the liner contains a conductive element. This ensures the measured medium is grounded. To comply with the EMC- and Low Voltage Regulations the connection box/transmitter must be grounded in addition to the meter tube of the flowmeter sensor. Pos: 10 /==== Leeres Modul mit einer Absatzmarke, DS, 1-spaltig ==== @ 2\mod_1153381574375_0.doc @ 35553

Pos: 11.1 /Überschriften/1.1/2-spaltig/Einbaubedingungen @ 2\mod_1155119709593_3101.doc @ 38554

2.3 Installation Requirements Pos: 11.2 /Technische Daten / Datenblatt/Durchfluss/FSM4000/Einbaubedingungen/Allgemeine Hinweise @ 5\mod_1163075963593_3101.doc @ 46893

The following points must be observed for the installation: • The meter tube must always be completely full. • The flow direction must correspond to the identification if present. • The maximum torque for all flange connections must be complied

with. • The devices must be installed without mechanical tension

(torsion, bending). • Install flange and wafer units with coplanar counter flanges and

use only appropriate gaskets. • Use only flange seals made from a compatible material for the

fluid and fluid temperatures. • Gaskets must not extend into the flow area since possible

turbulence could influence the device accuracy. • The pipeline may not exert any unallowable forces or torques on

the device. • Do not remove the plugs in the cable connectors until you are

ready to install the electrical cable. • Install transmitter at a largely vibration-free location. • Do not expose the transmitter to direct sunlight or provide for

appropriate sun protection where necessary. Pos: 11.3 /======= Spaltenumbruch ======== @ 0\mod_1132937966324_3101.doc @ 3831


5

Pos: 11.4 /Technische Daten / Datenblatt/Durchfluss/FXE4000/Einbaubedingungen/Elektrodenachse @ 2\mod_1155119847515_3101.doc @ 38596

2.3.1 Electrode axis

Electrode axis (1) should be horizontal if at all possible or no more that 45° from horizontal.

G00041

max. 45°

1

Fig. 2 Pos: 11.5 /==== Leeres Modul mit einer Absatzmarke, DS, 1-spaltig ==== @ 2\mod_1153381574375_0.doc @ 35553

Pos: 11.6 /Technische Daten / Datenblatt/Durchfluss/FXE4000/Einbaubedingungen/Ein- und Auslaufstrecke (BA + IA) @ 2\mod_1155134311203_3101.doc @ 38877

2.3.2 In- and outlet pipe sections

Straight inlet section Straight outlet section ≥ 3 x DN ≥ 2 x DN

DN = Flowmeter sensor size • Do not install fittings, manifolds, valves etc. directly in front of the

meter tube (1). • Butterfly valves must be installed so that the valve plate does not

extend into the flowmeter sensor. • Valves or other turn-off components should be installed in the

outlet pipe section (2). • For compliance with the measuring accuracy, observe the inlet

and outlet pipe sections.

G00037

1 2

3xDN 2xDN


Pos: 11.8 /Technische Daten / Datenblatt/Durchfluss/FSM4000/Einbaubedingungen/Vertikale Leitungen @ 3\mod_1157631734081_3101.doc @ 39823

2.3.3 Vertical connections

• Vertical installation for measuring abrasive fluids, preferably with flow in upward direction.

G00206 Fig. 4 Pos: 11.9 /======= Spaltenumbruch ======== @ 0\mod_1132937966324_3101.doc @ 3831

Pos: 11.10 /Technische Daten / Datenblatt/Durchfluss/FXE4000/Einbaubedingungen/Horizontale Leitungen @ 2\mod_1155120108937_3101.doc @ 38659

2.3.4 Horizontal connections

• Meter tube must always be completely full. • Provide for a slight incline of the connection for degassing.

G00038

3°


Pos: 11.12 /Technische Daten / Datenblatt/Durchfluss/FXE4000/Einbaubedingungen/Freier Ein- bzw. Auslauf @ 2\mod_1155120144781_3101.doc @ 38680

2.3.5 Free inlet or outlet

• Do not install the flowmeter at the highest point or in the draining- off side of the pipeline, flowmeter runs empty, air bubbles can form (1).

• Provide for a siphon fluid intake for free inlets or outlets so that the pipeline is always full (2).

G00040

1

2


Pos: 11.14 /Technische Daten / Datenblatt/Durchfluss/FXE4000/Einbaubedingungen/Stark verschmutzte Messstoffe @ 2\mod_1155120187750_3101.doc @ 38701

2.3.6 Strongly contaminated fluids

• For strongly contaminated fluids, a bypass connection according to the figure is recommended so that operation of the system can continue to run without interruption the during the mechanical cleaning.

G00042 Fig. 7 Pos: 11.15 /==== Leeres Modul mit einer Absatzmarke, DS, 1-spaltig ==== @ 2\mod_1153381574375_0.doc @ 35553

Pos: 11.16 /Technische Daten / Datenblatt/Durchfluss/FSM4000/Einbaubedingungen/Montage in der Nähe von Pumpen @ 3\mod_1157631958985_3101.doc @ 39844

2.3.7 Installation in the vicinity of pumps

• For flowmeter primaries that are installed near pumps or other vibration-causing fixtures, the use of mechanical vibration control components is mandatory.

G00207 Fig. 8 Pos: 11.17 /======= Spaltenumbruch ======== @ 0\mod_1132937966324_3101.doc @ 3831


6

Pos: 11.18 /Technische Daten / Datenblatt/Durchfluss/FSM4000/Einbaubedingungen/Einbau in Rohrleitungen größerer Nennweiten @ 3\mod_1157632081771_3101.doc @ 39865

2.3.8 Installation in larger size pipelines

Determine the resulting pressure loss when using reduction pieces (1): 1. Calculate the diameter ratio d/D. 2. Determine the flow velocity based on the flow range nomograph

(Fig. 10). 3. Read the pressure drop on the Y-axis in Fig. 10.

G00213

D d

8°

1

Fig. 9 1 d V Δp D

= Flange reducer = Inside diameter of the flowmeter = flow velocity [m/s] = pressure drop [mbar] = Inside diameter of the pipeline

Nomograph for pressure drop calculations For flange transition piece with α/2 = 8°

Fig. 10 Pos: 12 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830


7

Pos: 13 /==== Wechsel zwei- auf einspaltig ==== @ 0\mod_1130421955859_3101.doc @ 3829

Wechsel ein-auf zweispaltig Pos: 14 /Überschriften/1.1/1-spaltig/M - O/Nennweite, Nenndruck, Messbereich @ 17\mod_1201168918704_3101.doc @ 154023

2.4 Flowmeter Sizes, Pressure Ratings, Flow Range Pos: 15 /Technische Daten / Datenblatt/Durchfluss/FXE4000/Messbereich @ 7\mod_1175088848531_3101.doc @ 74665

2.5 Flowmeter Sizes, Pressure Ratings, Flow Range

Meter Size Std. Press. Rating PN

Min. Flow Range Flow Velocity 0 … 0.5 m/s

Max. Flow Range Flow Velocity 0 … 10 m/s

3 4 6

1/10 5/32 1/4

40 40 40

0 0 0

… … …

0.2 0.4

1

l/min l/min l/min

0.1 0.1 0.3

US gal/min US gal/min US gal/min

0 0 0

… … …

4 8

20

l/min l/min l/min

1.1 2.1 5.3


8 10 15 20

5/16 3/8 1/2 3/4

40 40 40 40

0 0 0 0

… … … …

1.5 2.25 5.0 7.5

l/min l/min l/min l/min

0.4 0.6 1.3 2.0

US gal/min US gal/min US gal/min US gal/min

0 0 0 0

… … … …

30 45

100 150

l/min l/min l/min l/min

7.9 12 36 40


25 32 40

1 1 1/4 1 1/2

40 40 40

0 0 0

… … …

10 20 30

l/min l/min l/min

2.6 5.3 7.9


0 0 0

… … …

200 400 600

l/min l/min l/min

53 106 159


50 65 80

2 2 1/2

3

40 40 40

0 0 0

… … …

3 6 9

m3/h m3/h m3/h

13 26 40


0 0 0

… … …

60 120 180

m3/h m3/h m3/h

264 528 793


100 125 150

4 5 6

16 16 16

0 0 0

… … …

12 21 30

m3/h m3/h m3/h

53 92

132


0 0 0

… … …

240 420 600

m3/h m3/h m3/h

1057 1849 2642


200 250 300

8 10 12

10/16 10/16 10/16

0 0 0

… … …

54 90

120

m3/h m3/h m3/h

238 396 528


0 0 0

… … …

1080 1800 2400

m3/h m3/h m3/h

4755 7925

10567


350 400 450 500

14 16 18 20

10/16 10/16 10/16

10

0 0 0 0

… … … …

165 225 300 330

m3/h m3/h m3/h m3/h

726 991

1321 1453


0 0 0 0

… … … …

3300 4500 6000 6600

m3/h m3/h m3/h m3/h

14529 19813 26417 29059


600 700 800

24 28 32

10 10 10

0 0 0

… … …

480 660 900

m3/h m3/h m3/h

2113 2906 3963


0 0 0

… … …

9600 13200 18000

m3/h m3/h m3/h

30380 58118 79252


900 1000

36 40

10 10

0 0

… …

1200 1350

m3/h m3/h

5283 5944

US gal/min US gal/min

0 0

… …

24000 27000

m3/h m3/h

105669 118877

US gal/min US gal/min

Pos: 16 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830


8

Pos: 17 /==== Wechsel ein- auf zweispaltig ==== @ 0\mod_1130421847171_3101.doc @ 3828 Wechsel ein-auf zweispaltig Pos: 18 /Technische Daten / Datenblatt/Durchfluss/FSM4000/Allgemein/Durchflussnomogramm @ 3\mod_1157633105784_3101.doc @ 39886

Flange design and pressure rating Meter size Flange 1) Material PN PED

3 ... 25 (1/10 ... 1")

DIN ASME

JIS

SS 1.4571 (316 Ti) or steel

40 bar CL150, CL300

10 bar

SEP Art.3

para.332

(1 1/4") DIN

ASME JIS


40 bar CL150, CL300

10 bar 40

(1 1/2") DIN

ASME JIS


40 bar CL150, CL300

10 bar 50 (2")

DIN ASME

JIS


40 bar CL150, CL300

10 bar 65

(2 1/2") DIN

ASME JIS


16, 40 bar CL150, CL300

10 bar 80 (3")

DIN ASME

JIS


40 bar CL150, CL300

10 bar 100 (4")

DIN ASME

JIS


16, 40 bar CL150, CL300

10 bar 125 (5")

DIN ASME


16, 40 bar CL150, CL300

150 (6")

DIN ASME


16, 40 bar CL150, CL300

200 (8")

DIN ASME


10, 16, 25, 40 barCL150, CL300

250 (10")

DIN ASME


10, 16, 25, 40 barCL150, CL300

300 (12")

DIN ASME


10, 16, 25, 40 barCL150, CL300

350 ... 1000 (14 ... 40")

DIN ASME


10, 16, 25 bar CL150

Con

form

ity a

sses

smen

t in

acco

rdan

ce w

ith c

ateg

ory

III, m

odul

e B

1 +

D, f

luid

gro

up 1

1) Connecting dimensions for flange acc. to DIN2501 / EN1092-1 or ASME or JIS.

Other meter sizes, pressure stages and temperature classes are available upon request.

2.6 Flowrate nomograph

The volume flowrate is a function of the flow velocity and the diameter of the flowmeter. The flowrate nomograph indicates the flowrate range for a specific flowmeter size and which flowmeter sizes are suitable for a specific flowrate.

G00225

l/min l/s3/hm

5

4

3

2

103

102

8

65

4

3

2

8

654

3

2

10-1

10

8

65

4

3

8

65

4

3

2

2

1

8

65

4

3

2

8

65

4

3

2

8

65

4

3

2

8

654

3

10-1

10-2

10-3

10

8

654

3

2

1

8

654

3

2

8

65

4

3

2

DN10

0

DN80

DN65

DN50

DN

40

DN

32

DN

25

DN20

DN15

DN10

DN8

DN6

DN4

DN

3

DN2

DN1.

5

DN1

32 4 5 6 8 1010,80,60,5

m/s

10-3

10-1

10-2

8

654

3

2

8

65

4

3

2

8

65

4

3

2

1

10

8

65

4

3

2

102

8

654

3

2

3

2

1

Fig. 11: Flowrate nomograph DN 1 ... DN 100 (1/25 ... 4") 1 Example


9

G00226

l/min 3/hm l/s

103

8

6

5

4

3

2

108

6

54

4

3

3

2

2

108

6

5

4

3

2

4

5

104

8

65

4

3

3

2

2

103

8

65

4

3

2

10

10

8

654

3

2

2

32 4 5 6 8 1010,80,60,5

m/s

10

8

654

3

2

8

65

4

3

2

10

3

8

654

3

2

10

654

3

2

DN

250D

N30

0DN

350

DN

400

DN

450D

N50

0DN60

0DN

700D

N80

0DN

900D

N10

00

DN

125D

N15

0

DN20

0

Fig. 12: Flowrate nomograph DN 125 ... DN 1000 (5 ... 40")

Example: Flowrate = 7 m3/h (max. value = range end value). Flowmeter sizes DN 20 ... DN 65 (3/4 ... 2 1/2“) are suitable for a flow velocity between 0.5 ... 10 m/s. Pos: 19 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830


10


Wechsel ein-auf zweispaltig Pos: 21 /Überschriften/1/M - O/Modell SE41F @ 3\mod_1157708869843_3101.doc @ 40854

3 Model SE41F Pos: 22 /Überschriften/1.1/1-spaltig/S - U/Technische Daten @ 7\mod_1157704677334_3101.doc @ 40581

3.1 Technical data Pos: 23 /==== Wechsel ein- auf zweispaltig ==== @ 0\mod_1130421847171_3101.doc @ 3828 Wechsel ein-auf zweispaltig Pos: 24 /Technische Daten / Datenblatt/Durchfluss/FSM4000/Technische Daten/Messaufnehmer/Modell SE41F @ 3\mod_1157634558052_3101.doc @ 39949

Temperature graph

G00214

1

2

3

4 6

5

Fig. 13: Fluid temperature as function of ambient temperature

1 Ambient temperature °C 2 Fluid temperature °C 3 Standard flange (steel): Hard/soft rubber max. 90/60 °C

(194 ... 140 °F) 4 with stainless steel flange 5 Standard flange (steel): PTFE/PFA/ETFE max.130 °C (266°F) 6 High temperature: Thick PTFE / PFA max. 180 °C (356 °F)

Max. allowable cleaning temperature PTFE-, PFA-design CIP-Cleaning Liner

Flowmeter sensor

Tmax tmax Min.

Tamb.

Steam cleaning PTFE, PFA 150 °C (302 °F) 60 25 °C (77 °F)Liquid cleaning PTFE, PFA 140 °C (284 °F) 60 25 °C (77 °F)If the ambient temperature is > 25 °C, then the difference must be subtracted from the max. cleaning temperature. Tmax - Δ °C.Δ °C = (Tamb. - 25 °C) Weight Refer to dimensional drawings Min. allowable pressure as factor of fluid temperature Liner Nominal size

DN POperation mbar abs

at TOperating

Hard rubber 15 … 1000 (1/2 … 40“)

0 < 90 °C (194 °F)

Soft rubber 50 … 1000 (2 … 40“)

0 < 60 °C (140 °F)

PTFE 10 … 600 (3/8 … 24“)

270 400 500

< 20 °C (68 °F) < 100 °C (212 °F)< 130°C (266 °F)

Thick PTFE High temperature Design

25 … 80 (1 … 3“)

100 … 250 (4 … 10“) 300 (12“)

0

67

27

< 180 °C (356 °F)

< 180 °C (356 °F)

< 180 °C (356 °F)PFA 3 … 200

(1/10 … 8“) 0 0

< 130°C (266 °F)< 180 °C (356 °F)

ETFE 25 ... 1000 (1 ... 40“)

100 < 130 °C (266 °F)

Flowmeter sensor material Parts Standard Options Liner PTFE, PFA, hard/soft

rubber, ETFE −

Signal and ground electrode for - Hard rubber - Soft rubber

SS 1.4571 (316 Ti) Hastelloy B-3 (2.4600), Hastelloy C-4 (2.4610), Titanium, tantalum, platinum iridium, SS 1.4539 (904 L)

- PTFE, PFA, ETFE

Hastelloy C-4 (2.4610)

SS 1.4571 (316 Ti) Hastelloy B-3 (2.4600), Titanium, tantalum, platinum iridium, SS 1.4539 (904 L)

Grounding plate SS 1.4571 (316 Ti) upon request Protection plate SS 1.4571 (316 Ti) upon request

Process connection material Parts Standard Options Flanges DN 3 ... DN 15 (1/10 ... 1/2“)

SS 1.4571 (316 Ti), standard

DN 20 ... DN 300 (3/4 ... 10“)

Galvanized: DIN/EN: 1.0038/1.0570/1.0460 ASME: A105/C21

DN 350 ... DN 1000 (18 ... 40“)

Painted: DIN/EN: 1.0038/1.0570/1.0460 ASME: A105/C21

SS 1.4571 (316 Ti)

Housing DN 3 ... 300 (1/10 ... 10“)

Dual-shell casing Al casting, painted, paint coat, 80 µm thick, RAL 9002

−

DN 350 ... DN 1000 (18 ... 40“)

Welded steel design, painted, paint coat, 80 µm thick, RAL 9002

−

Connection box Al alloy, painted, 80 µm dick, frame: dark gray, RAL 7012 Cover: light gray, RAL 9002

−

Meter tube SS 1.4301 (304) − PG-Connector Polyamide −


11

Storage Temperature -20 ... 70 °C (-4 ... 158 °F) Protection Class per EN 60529 IP 67 IP 68 (option) Pipeline Vibration Following EN 60068-2-6 Transmitter - In the range of 10…55 Hz, max. deflection 0.15 mm Flowmeter sensor - In the range of 10…55 Hz, max. deflection 0.15 mm - In the range of 10…55 Hz, max. acceleration 2 g Designs The flanged flowmeters comply with the installation lengths specified in VDI / VDE 2641, ISO 13359 or according to DVGW (process sheet W420, design WP; ISO 4064 short). Material load Limits for allowable fluid temperature (TS) and allowable pressure (PS) are a function of the liner and flange material used (see the builder's and model plate of the unit). Temperature limits

Max. temperature Liner Flange material

Min. temperature Standard High

temperatureHard rubber Steel

SS 1.4571 (316 Ti)

-10 °C (14 °F) -15 °C (5°F)

90 °C (194 °F) 90 °C

(194 °F)

− −

Soft rubber Steel SS 1.4571 (316 Ti)

-10 °C (14 °F) -15 °C (5 °F)

60 °C (140 °F) 60 °C

(140 °F)

− −

PTFE / PFA / ETFE

Steel SS 1.4571 (316 Ti)

-10 °C (14 °F) -25 °C

(-13 °F)

130 °C (266 °F) 130 °C

(266 °F)

− −

Thick PTFE / PFA

Steel SS 1.4571 (316 Ti)

-10 °C (14 °F) -25 °C

(-13 °F)

130 °C (266 °F) 130 °C

(266 °F)

180 °C (356 °F) 180 °C

(356 °F)

G00215

PN 40

PN 25

PN 16

PN 10

0

5

10

15

20

25

30

35

40

45

-30 -10 10 30 50 70 90 110 130 150 170 190 [°C]

PS[bar]

-22 14 50 86 122 158 194 230 266 302 338 374 [°F]TS

0

72.5

145.0

217.5

290.0

362.5

435.0

507.5

580.0

652.5

PS[psi]

Fig. 14: DIN flanges SS 1.4571 (316 Ti) to DN 600 (24")

G00216

PS[bar]

TS

CL 300

CL 150

0

5

10

15

20

25

30

35

40

45

50

55

-30 -10 10 30 50 70 90 110 130 150 170 190 [°C]

-22 14 50 86 122 158 194 230 266 302 338 374 [°F]

PS[psi]

72.5

145.0

217.5

290.0

362.5

435.0

507.5

580.0

652.5

725.5

797.5

0

Fig. 15: ASME flange SS 1.4571 (316 Ti) to DN 300 (CL150/300) to DN 1000 (CL150)

G00217

PS[bar]

TS-30 -10 10 30 50 70 90 110 130 150 170 190 [°C]

-22 14 50 86 122 158 194 230 266 302 338 374 [°F]

PN 40

PN 25

PN 16

PN 10

0

5

10

15

20

25

30

35

40

45

PS[psi]

0

72.5

145.0

217.5

290.0

362.5

435.0

507.5

580.0

652.5

Fig. 16: DIN flange SS 1.4571 (316 Ti) to DN 600 (24“)


12

G00218

PS[bar]

TS-30 -10 10 30 50 70 90 110 130 150 170 190 [°C]

-22 14 50 86 122 158 194 230 266 302 338 374 [°F]

CL 300

CL 150

0

5

10

15

20

25

30

35

40

45

50

55

PS[psi]

0

72.5

145.0

217.5

290.0

362.5

435.0

507.5

580.0

652.5

725.0

797.5

Fig. 17: ASME flange steel to DN 300 (CL150/300) to DN 1000 (CL150)

JIS 10K-B2210 Flange Nominal size DN

Material PN TS PS [bar]

32 … 300 (1¼ … 12“)

SS 1.4571 (316 Ti)

10 -25 … +180 °C (-13 … +356 °F)

10

32 … 300 (1¼ … 12“)

Steel 10 -10 … +180 °C (14 … 266 °F)

10

G00219

PS[bar]

TS

6

7

8

9

10

11

12

13

14

15

16

17

DN 700 PN 16

DN 900 PN 16DN 800 PN 16

DN 1000 PN 16

DN 900 PN10DN 800 PN 10DN 700 PN 10

DN 1000 PN 10

-30 -20 -10 0 10 20 30 40 50 60 70 80 90 [°C]

-22 -4 14 32 50 68 86 104 122 140 158 176 194 [°F]

PS[psi]

87.0

101.5

116.0

130.5

145.0

159.5

174.0

188.5

203.0

217.5

232.0

246.5

Fig. 18: DIN flange SS 1.4571 (316 Ti), DN 700 ... DN 1000 (28 ... 40“)

G00220

PS[bar]

TS

DN 700 PN 16

DN 900 PN 16DN 800 PN 16

DN 1000 PN 16

DN 900 PN 10DN 800 PN 10DN 700 PN 10

DN 1000 PN 106

7

8

9

10

11

12

13

14

15

16

17

-10 0 10 20 30 40 50 60 70 80 90 [°C]

-14 32 50 68 86 104 122 140 158 176 194 [°F]

PS[psi]

87.0

101.5

116.0

130.5

145.0

159.5

174.0

188.5

203.0

217.5

232.0

246.5

Fig. 19: DIN flange steel, DN 700 ... DN 1000 (28 ... 40“) Pos: 25 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830


13


Wechsel ein-auf zweispaltig Pos: 27.1 /Überschriften/1.1/1-spaltig/M - O/Maßzeichnungen @ 11\mod_1157707121639_3101.doc @ 40791

3.2 Dimensional drawings Pos: 27.2 /Technische Daten / Datenblatt/Durchfluss/FSM4000/Maßzeichnungen/Durchflussmesser SE41/Maßzeichnung Flansch DN3-DN300 (DIN) @ 3\mod_1157638227388_3101.doc @ 40075

3.2.1 Model SE41F

Flange acc. to DIN / EN 1092-15), DN 3 … DN 300; ASME B16.5, 1/10 ... 12"

G00227

H

ØD2

k

FE G

88 (3,46)

35 (1,38)

A b

L*

Ød4

ØD

d2

EF

G

k

88 (3,46)

35 (1,38)1

2

1

2

Tolerance: L* DN 3 ... DN 200: +0/-3 (0.12"); DN 250 ... DN 300: +0/-5 (0.20")

Tolerance: L* 1/10 ... 8": +0/-3 (0.12“); 10 ... 12“: +0/-5 (0.20“) Fig. 20: Dimensions in mm (inch) 1 Cable gland M20 x 1.5 or NPT 2 Number of holes N


14

Flange dimensions acc. to DIN / EN Meter dimensions acc. to DIN / EN Wht.

mm mm DN PN1)

D/H d4 b k d2 N A L* L2) L3) E4) F G4) kg

3…86) 10 15 20

10 … 40 10 … 40 10 … 40 10 … 40

90 90 95

105

40 40 45 58

18 18 18 20

60 60 65 75

14 14 14 14

4 4 4 4

67 67 67 87

130200200200

133203203203

136 206 206 206

101 101 101 112

62 62 62 73

129129129140

2.5 3 3

3.5 25 32 40

10 … 40 10 … 40 10 … 40

115 140 150

68 78 88

20 20 20

85 100 110

14 18 18

4 4 4

87 95

100

200200200

203203203

206 206 206

112 117 121

73 78 82

140145149

4 5 6

50 10 … 40 165 102 21 125 18 4 116 200 203 206 129 90 157 8 655)

10 … 16 25 … 40

185 185

122122

21 25

145 145

18 18

4 8

100100

200200

203203

206 206

153 153

104 104

171171

12 12

80 10 … 40 200 138 27 160 18 8 100 200 203 206 159 110 177 16 100

10 … 16 25 … 40

220 235

158162

23 27

180 190

18 22

8 8

130130

250250

253253

256 256

179 179

130 130

197197

15 15

125

10 … 16 25 … 40

250 270

188188

25 29

210 220

18 26

8 8

124124

250250

255255

260 260

170 170

127 127

195195

23 30

150

10 … 16 25 … 40

285 300

212218

25 31

240 250

22 26

8 8

170170

300300

305305

310 310

190 190

148 148

216216

28 34

200

10 16

340 340

268268

28 28

295 295

22 22

8 12

195195

350350

355355

360 360

222 222

179 179

248248

54 54

250

10 16

395 405

320320

30 30

350 355

22 26

12 12

250250

450450

455455

460 460

250 250

207 207

276275

80 80

300

10 16

445 460

370378

31 33

400 410

22 26

12 12

250250

500500

505505

510 510

293 293

250 250

318318

83 92

inch inch DN PN1)

D/H d4 b k d2 N A L* L2) L3) E4) F G4) lb

3…86) 10 15 20

10 … 40 10 … 40 10 … 40 10 … 40

3.54 3.54 3.74 4.13

1.571.571.772.28

0.71 0.71 0.71 0.79

2.36 2.36 2.56 2.95

0.550.550.550.55

0.160.160.160.16

2.642.642.643.43

5.127.877.877.87

5.247.997.997.99

5.35 8.11 8.11 8.11

3.98 3.98 3.98 4.41

2.44 2.44 2.44 2.87

5.085.085.085.51

5.516.616.617.72

25 32 40

10 … 40 10 … 40 10 … 40

4.53 5.51 5.91

2.683.073.46

0.79 0.79 0.79

3.35 3.94 4.33

0.550.710.71

0.160.160.16

3.433.743.94

7.877.877.87

7.997.997.99

8.11 8.11 8.11

4.41 4.61 4.76

2.87 3.07 3.23

5.515.715.87

8.8211.0213.23

50 10 … 40 6.50 4.02 0.83 4.92 0.71 0.16 4.57 7.87 7.99 8.11 5.08 3.54 6.18 17.64 655)

10 … 16 25 … 40

7.28 7.28

4.804.80

0.83 0.98

5.71 5.71

0.710.71

0.160.31

3.943.94

7.877.87

7.997.99

8.11 8.11

6.02 6.02

4.09 4.09

6.736.73

26.4626.46

80 10 … 40 7.87 5.43 1.06 6.30 0.71 0.31 3.94 7.87 7.99 8.11 6.26 4.33 6.97 35.27 100

10 … 16 25 … 40

8.66 9.25

6.226.38

0.91 1.06

7.09 7.48

0.710.87

0.310.31

5.125.12

9.849.84

9.969.96

10.08 10.08

7.05 7.05

5.12 5.12

7.767.76

33.0733.07

125

10 … 16 25 … 40

9.84 10.63

7.407.40

0.98 1.14

8.27 8.66

0.711.02

0.310.31

4.884.88

9.849.84

10.0410.04

10.24 10.24

6.69 6.69

5.00 5.00

7.687.68

50.7166.14

150

10 … 16 25 … 40

11.22 11.81

8.358.58

0.98 1.22

9.45 9.84

0.871.02

0.310.31

6.696.69

11.8111.81

12.0112.01

12.20 12.20

7.48 7.48

5.83 5.83

8.508.50

61.7374.96

200

10 16

13.39 13.39

10.55 10.55

1.10 1.10

11.6111.61

0.870.87

0.310.47

7.687.68

13.7813.78

13.9813.98

14.17 14.17

8.74 8.74

7.05 7.05

9.769.76

119.05119.05

250

10 16

15.55 15.94

12.60 12.60

1.18 1.18

13.7813.98

0.871.02

0.470.47

9.849.84

17.7217.72

17.9117.91

18.11 18.11

9.84 9.84

8.15 8.15

10.8710.83

176.37176.37

300

10 16

17.52 18.11

14.57 14.88

1.22 1.30

15.7516.14

0.871.02

0.470.47

9.849.84

19.6919.69

19.8819.88

20.08 20.08

11.54 11.54

9.84 9.84

12.5212.52

182.98202.83

1) Other pressure stages upon request. 2) Standard with a grounding plate mounted on one side of flange in SS 1.4571 (316 Ti). Other materials upon request. For additional information, see "Grounding". DN 3 ... DN 100 L + 3 mm (0.12"), DN 125 ... DN 300 L + 5 mm (0.20"). 3) With protective flanges. The protective flanges provide the grounding function, grounding plate is not required. DN 3 ... DN 100, DN 125 ... DN 300 L + 10 mm (0.39"). Also available with protective flanges in 1000 series. Installation length ≤ DN 80 L+ 20 mm (0.79"), for DN 100 or higher L+ 25 mm (0.98"). 4) For high temperature designs < DN 125 + 20 mm (0.79"), > DN 100 + 120 mm (4.72"). 5) Connecting dimensions acc. to EN1092-1. For DN 65 / PN 16 acc. to EN1092-1 please order PN 40. 6) Connection flange DN10. Pos: 27.3 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830


15

Pos: 27.4 /Technische Daten / Datenblatt/Durchfluss/FSM4000/Maßzeichnungen/Durchflussmesser SE41/Maßzeichnung Flansch DN3-DN300 (ASME) @ 3\mod_1157638358417_3101.doc @ 40096

Meter dimensions acc. to ASME

CL 150 / CL 300 Flange dimensions acc. to ASME

CL 150 Flange dimensions acc. to ASME

CL 300 Weight

mm mm mm A L1) 2) E3) F G D/H d4 b k d2 N D/H d4 b k d2 N

Inch ISO 13359

old Inst.

lngth.

CL 150/ CL 300

kg

1/10...5/16 3/8. 1/2

3/4 1

67 67 87 87

130 200 200 200

130 270 270 270

101 101 112 112

62 62 73 73

129 129 140 140

89 89 99

108

35354351

13131416

60607080

16161616

4444

9595

117124

35354351

16 16 18 20

67 67 83 89

16 16 19 19

4444

2.5 3

3.5 4

1 1/4 1 1/2

2

95 100 116

200 200 200

280 280 280

117 121 129

78 82 90

145 149 157

117 127 152

647392

182021

8999

121

161619

444

134156165

647392

21 23 24

99 115 127

19 23 19

448

5 6 8

2 1/2 3 4

100 100 130

200 200 250

330 340 400

153 159 179

104 110 130

171 177 197

178 191 229

105127157

252626

140153191

191919

448

191210254

105127157

27 30 34

150 168 200

23 23 22

888

12 16 15

5 6 8

10

124 170 195 250

250 300 350 450

450 450 500 550

169 190 222 250

127 148 179 207

195 216 248 276

254 279 343 406

186216270324

28303435

216241298362

22222225

888

12

280318381445

186216270324

39 41 47 53

235 270 330 387

22 22 25 28

8121216

36/38 38 66 98

12 250 500 620 293 250 319 483 381 37 432 26 12 521 381 56 451 32 16 124/181 inch inch inch

A L1) 2) E3) F G D/H d4 b k d2 N D/H d4 b k d2 N Inch ISO

13359 old

Inst. lngth.

CL 150/ CL 300

lb

1/10...5/16 3/8. 1/2

3/4 1

2.64 2.64 3.43 3.43

5.12 7.87 7.87 7.87

5.12 10.63 10.63 10.63

3.983.984.414.41

2.44 2.44 2.87 2.87

5.08 5.08 5.51 5.51

3.503.503.904.25

1.381.381.692.01

0.510.510.550.63

2.362.362.763.15

0.630.630.630.63

0.160.160.160.16

3.743.744.614.88

1.381.381.692.01

0.63 0.63 0.71 0.79

2.64 2.64 3.27 3.50

0.63 0.63 0.75 0.75

0.160.160.160.16

5.5 6.6 7.7 8.8

1 1/4 1 1/2

2

3.74 3.94 4.57

7.87 7.87 7.87

11.02 11.02 11.02

4.614.765.08

3.07 3.23 3.54

5.71 5.87 6.18

4.615.005.98

2.522.873.62

0.710.790.83

3.503.904.76

0.630.630.75

0.160.160.16

5.286.146.50

2.522.873.62

0.83 0.91 0.94

3.90 4.53 5.00

0.75 0.91 0.75

0.160.160.31

11.0 13.2 17.6

2 1/2 3 4

3.94 3.94 5.12

7.87 7.87 9.84

12.99 13.39 15.75

6.026.267.05

4.09 4.33 5.12

6.73 6.97 7.76

7.017.529.02

4.135.006.18

0.981.021.02

5.516.027.52

0.750.750.75

0.160.160.31

7.528.27

10.00

4.135.006.18

1.06 1.18 1.34

5.91 6.61 7.87

0.91 0.91 0.87

0.310.310.31

26.5 35.3 33.1

5 6 8

10

4.88 6.69 7.68 9.84

9.84 11.81 13.78 17.72

17.72 17.72 19.69 21.65

6.657.488.749.84

5.00 5.83 7.05 8.15

7.68 8.50 9.76

10.87

10.0010.9813.5015.98

7.328.50

10.6312.76

1.101.181.341.38

8.509.49

11.7314.25

0.870.870.870.98

0.310.310.310.47

11.0212.5215.0017.52

7.328.50

10.6312.76

1.54 1.61 1.85 2.09

9.25 10.63 12.99 15.24

0.87 0.87 0.98 1.10

0.310.470.470.63

79.4/83.8 83.8

145.5 216.1

12 9.84 19.69 24.41 11.54 9.84 12.56 19.02 15.00 1.46 17.01 1.02 0.47 20.51 15.00 2.20 17.76 1.26 0.63 273.4/399.0

1) With a grounding plate mounted on one side of flange in SS 1.4571 (316 Ti), 1/10 ... 5/16" L + 3 mm (0.12"), 5 ... 12" L + 5 mm (0.20"). Other materials upon request. For additional information. see "Grounding". 2) With protective flanges. The protective flanges provide the grounding function, grounding plate is not required, 1/10 ... 5/16“ L + 6 mm (0.24"), 5 ... 12" L + 10 mm (0.39"). Also available with protective flanges in 1000 series. Installation length ≤ 3" L + 20 mm (0.79"), for 4" or higher L + 25 mm (0.98"). 3) For high temperature designs < 5" + 20 mm (0.79"), > 4" + 120 mm (4.72"). 4) Connection flange 1/2". Pos: 27.5 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830


16

Pos: 27.6 /Technische Daten / Datenblatt/Durchfluss/FSM4000/Maßzeichnungen/Durchflussmesser SE41/Maßzeichnung Flansch DN350-DN1000 (DIN) @ 3\mod_1157638408849_3101.doc @ 40117

Flange acc. to DIN / EN 1092-14). DN 350 ... DN 1000; ASME B16.5 / ASME B16.47 Series B. 14 ... 40"

G00228d4

b k

D

d2

A

EG

F

L*

12

Tolerance: L* DN 350 ... DN 500: +0/-5 (0.20"); DN 600 ... DN 1000: +0/-10 (0.39“)

Tolerance: L* 14 ... 20“: +0/-5 (0.20“); 24 ... 40“: +0/-10 (0.39“) Fig. 21: Dimensions in mm (inch) 1 Cable gland M20 x 1.5 or NPT 2 Number of holes N


17

Flange dimensions acc. to DIN / EN Meter dimensions acc. to DIN / EN Weight

mm mm DN PN1) D k d4 d2 N b A L L2) L3) G E F

appr. kg

350 350

10 16

505 520

460 470

430 438

22 26

16 16

31 35

322322

550550

555555

560560

341 341

313 313

250250

126 140

400 400

10 16

565 580

515 525

482 490

26 30

16 16

31 37

370370

600600

605605

610610

367 367

339 339

275275

155 175

500 500

10 16

670 715

620 650

585 610

26 33

20 20

33 39

407407

650650

655655

660660

403 403

375 375

310310

191 235

600 600

10 16

780 840

725 770

685 725

30 36

20 20

33 41

469469

780780

785785

790790

454 454

426 426

361361

243 302

700 700

10 16

895 910

840 840

800 795

30 36

24 24

35 41

537537

910910

915915

920920

495 495

469 469

405405

315 340

800 800

10 16

1015 1025

950 950

905 900

33 39

24 24

37 43

605605

10401040

10451045

10501050

545 545

519 519

455455

405 467

900 900

10 16

1115 1125

1050 1050

1005 1000

33 39

28 28

39 45

671671

11701170

11751175

11801180

595 595

569 569

505505

483 567

1000 1000 1000

6 10 16

1175 1230 1255

1120 1160 1170

1080 1110 1115

30 36 42

28 28 28

31 39 47

739739739

130013001300

130513051305

131013101310

645 645 645

619 619 619

555555555

475 575 764

inch inch DN PN1) D k d4 d2 N b A L L2) L3) G E F

appr. lb

350 350

10 16

19.88 20.47

18.11 18.50

16.93 17.24

0.87 1.02

0.63 0.63

1.22 1.38

12.68 12.68

21.65 21.65

21.85 21.85

22.05 22.05

13.43 13.43

12.32 12.32

9.84 9.84

277.8 308.6

400 400

10 16

22.24 22.83

20.28 20.67

18.98 19.29

1.02 1.18

0.63 0.63

1.22 1.46

14.57 14.57

23.62 23.62

23.82 23.82

24.02 24.02

14.45 14.45

13.35 13.35

10.83 10.83

341.7 385.8

500 500

10 16

26.38 28.15

24.41 25.59

23.03 24.02

1.02 1.30

0.79 0.79

1.30 1.54

16.02 16.02

25.59 25.59

25.79 25.79

25.98 25.98

15.87 15.87

14.76 14.76

12.20 12.20

421.1 518.1

600 600

10 16

30.71 33.07

28.54 30.31

26.97 28.54

1.18 1.42

0.79 0.79

1.30 1.61

18.46 18.46

30.71 30.71

30.91 30.91

31.10 31.10

17.87 17.87

16.77 16.77

14.21 14.21

535.7 665.8

700 700

10 16

35.24 35.83

33.07 33.07

31.50 31.30

1.18 1.42

0.94 0.94

1.38 1.61

21.14 21.14

35.83 35.83

36.02 36.02

36.22 36.22

19.49 19.49

18.46 18.46

15.94 15.94

694.5 749.6

800 800

10 16

39.96 40.35

37.40 37.40

35.63 35.43

1.30 1.54

0.94 0.94

1.46 1.69

23.82 23.82

40.94 40.94

41.14 41.14

41.34 41.34

21.46 21.46

20.43 20.43

17.91 17.91

892.9 1.029.6

900 900

10 16

43.90 44.29

41.34 41.34

39.57 39.37

1.30 1.54

1.10 1.10

1.54 1.77

26.42 26.42

46.06 46.06

46.26 46.26

46.46 46.46

23.43 23.43

22.40 22.40

19.88 19.88

1.064.8 1.250.0

1000 1000 1000

6 10 16

46.26 48.43 49.41

44.09 45.67 46.06

42.52 43.70 43.90

1.18 1.42 1.65

1.10 1.10 1.10

1.22 1.54 1.85

29.09 29.09 29.09

51.18 51.18 51.18

51.38 51.38 51.38

51.57 51.57 51.57

25.39 25.39 25.39

24.37 24.37 24.37

21.85 21.85 21.85

1.047.2 1.267.7 1.684.3

1) Other pressure stages upon request. 2) Grounding plate mounted on one side of flange in SS 1.4571 (316 Ti). Other materials upon request, L + 5 mm (0.20"). 3) With protection plates attached to flange on both sides. Grounding plate is not required L + 10 mm (0.39"). Also available with protective flanges in 1000 series. Installation length ≤ DN 80 L + 20 mm (0.79"), for DN 100 or higher L + 25 mm (0.98"). 4) Connecting dimensions acc. to EN1092-1. Pos: 27.7 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830


18

Pos: 27.8 /Technische Daten / Datenblatt/Durchfluss/FSM4000/Maßzeichnungen/Durchflussmesser SE41/Maßzeichnung Flansch DN350-DN1000 (ASME) @ 3\mod_1157638448817_3101.doc @ 40138

Meter dimensions acc. to ASME CL 150 Flange dimensions acc. to ASME CL 1501) Weight

mm mm A L2) 3) E F G D k d4 d2 N b

Inch ISO 13359

old Install. length

appr. kg

14 16 18 20

322 370 407 416

550 600 686 762

650 700 –

780

313 329 375 375

250 275 310 310

341 367 403 403

534 597 635 699

476 540 578 635

413 470 533 584

28.6 28.6 31.7 31.7

12 16 16 20

40 42 45 48

178 225 230 263

24 28

469 537

914 –

850 910

423 469

361 405

454 495

813 837

749 749

692 762

34.9 34.9

20 20

53 50

327 385

32 36 40

605 671 739

– – –

1040 1170 1300

519 569 619

455 505 555

545 595 645

942 10571380

900 10101210

864 972

1140

22.2 25.4 56.0

48 44 28

51 57 63

513 662

1132 inch inch

A L2) 3) E F G D k d4 d2 N b Inch ISO

13359 old

Install. length

appr. lb

14 16 18 20

12.68 14.57 16.02 16.38

21.65 23.62 27.01 30.00

25.59 27.56

– 30.71

12.32 12.95 14.76 14.76

9.84 10.83 12.20 12.20

13.43 14.45 15.87 15.87

21.02 23.50 25.00 27.52

18.74 21.26 22.76 25.00

16.26 18.50 20.98 22.99

1.13 1.13 1.25 1.25

0.47 0.63 0.63 0.79

1.57 1.65 1.77 1.89

392.4 496.0 507.1 579.8

24 28

18.46 21.14

35.98 –

33.46 35.83

16.65 18.46

14.21 15.94

17.87 19.49

32.01 32.95

29.49 29.49

27.24 30.00

1.37 1.37

0.79 0.79

2.09 1.97

720.9 848.8

32 36 40

23.82 26.42 29.09

– – –

40.94 46.06 51.18

20.43 22.40 24.37

17.91 19.88 21.85

21.46 23.43 25.39

37.09 41.61 54.33

35.43 39.76 47.64

34.02 38.27 44.88

0.87 1.00 2.20

1.89 1.73 1.10

2.01 2.24 2.48

1.131.0 1.459.5 2.495.6

1) Other pressure stages upon request. Dimensions 28" or larger acc. to ASME B16.47 Series B. 2) Grounding plate mounted on one side of flange in SS 1.4571 (316 Ti). Other materials upon request, L + 5 mm (0.20"). 3) With protection plates attached to flange on both sides. Grounding plate is not required L + 10 mm (0.39"). Also available with protective flanges in 1000 series. Installation length ≤ 3" L + 20 mm (0.79"), for 4" or higher L + 25 mm (0.98"). Pos: 28 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830


19

Pos: 29 /Überschriften/1.1/1-spaltig/A - C/Bestellinformationen @ 2\mod_1139828409218_3101.doc @ 3181

3.3 Ordering information Pos: 30 /Technische Daten / Datenblatt/Durchfluss/FSM4000/Bestellinformationen/SE41F @ 3\mod_1157640360285_3101.doc @ 40348

Information on 3A conformity: If 3A conformity is desired, please order model SE21 Fixed flange, liner thick PTFE, PTFE, PFA, ETFE Electromagnetic Flowmeter Variant digit No. 1 - 6 7 8 9 10 11 12 13 14FSM4000-SE41F Catalog No. SE41F-remote sensor with welded flangeLiner Material Meter SizePFA DN 3 1/10 in. P 0 3PFA DN 4 5/32 in. P 0 4PFA DN 6 1/4 in. P 0 6PFA DN 8 5/16 in. P 0 8PTFE DN 10 3/8 in. T 1 0PTFE DN 15 1/2 in. T 1 5PTFE DN 20 3/4 in. T 2 0PTFE DN 25 1 in. T 2 5PTFE DN 32 1-1/4 in. T 3 2PTFE DN 40 1-1/2 in. T 4 0PTFE DN 50 2 in. T 5 0PTFE DN 65 2-1/2 in. T 6 5PTFE DN 80 3 in. T 8 0PTFE DN 100 4 in. T 1 HPTFE DN 125 5 in. T 1 QPTFE DN 150 6 in. T 1 FPTFE DN 200 8 in. T 2 HPTFE DN 250 10 in. T 2 FPTFE DN 300 12 in. T 3 HPTFE DN 350 14 in. T 3 FPTFE DN 400 16 in. T 4 HPTFE DN 450 18 in. (only ASME CL 150) T 4 FPTFE DN 500 20 in. T 5 HPTFE DN 600 24 in. T 6 HThick-PTFE DN 25 1 in. F 2 5Thick-PTFE DN 32 1-1/4 in. F 3 2Thick-PTFE DN 40 1-1/2 in. F 4 0Thick-PTFE DN 50 2 in. F 5 0Thick-PTFE DN 65 2-1/2 in. F 6 5Thick-PTFE DN 80 3 in. F 8 0Thick-PTFE DN 100 4 in. F 1 HThick-PTFE DN 125 5 in. F 1 QThick-PTFE DN 150 6 in. F 1 FThick-PTFE DN 200 8 in. F 2 HThick-PTFE DN 250 10 in. F 2 FThick-PTFE DN 300 12 in. F 3 H

Continued on next page1) Grounding electrodes available only for meter size DN 3 ... DN 300


20

Electromagnetic Flowmeter Variant digit No. 1 - 6 7 8 9 10 11 12 13 14FSM4000-SE41F Catalog No. SE41F-remote sensor with welded flangeLiner Material Meter SizeETFE DN 25 1 in. E 2 5ETFE DN 32 1-1/4 in. E 3 2ETFE DN 40 1-1/2 in. E 4 0ETFE DN 50 2 in. E 5 0ETFE DN 65 2-1/2 in. E 6 5ETFE DN 80 3 in. E 8 0ETFE DN 100 4 in. E 1 HETFE DN 125 5 in. E 1 QETFE DN 150 6 in. E 1 FETFE DN 200 8 in. E 2 HETFE DN 250 10 in. E 2 FETFE DN 300 12 in. E 3 HETFE DN 350 14 in. E 3 FETFE DN 400 16 in. E 4 HETFE DN 450 18 in. (only ASME CL 150) E 4 FETFE DN 500 20 in. E 5 HETFE DN 600 24 in. E 6 HETFE DN 700 28 in. E 7 HETFE DN 800 32 in. E 8 HETFE DN 900 36 in. E 9 HETFE DN 1000 40 in. E 1 TMeasuring Electrodes Material Grounding Electrodes 1)Hastelloy C-4 (2.4610) Without HHastelloy B-3 (2.4600) Without BSST 1.4571 (316Ti) Without STitanium Without MTantalum Without TSST 1.4539 (904L) Without FPlatinum-Iridium Without PHastelloy C-4 (2.4610) With OHastelloy B-3 (2.4600) With NSST 1.4571 (316Ti) With ETitanium With ITantalum With QSST 1.4539 (904L) With RPlatinum-Iridium With G

Continued on next page1) Grounding electrodes available only for meter size DN 3 ... DN 300


21

Electromagnetic Flowmeter Variant digit No. 1 - 6 11 12 13 14 15 16 17 18FSM4000-SE41F Catalog No. SE41F-remote sensor with welded flangePressure Rating 2)PN 10 ISO laid length CPN 16 ISO laid length 3) DPN 25 ISO laid length EPN 40 Standard for DN 3 ... DN 80 ISO laid length FJIS K10 ISO laid length KASME CL 150 DN 8 >= 0,5 µS/cm and laid length max. 200 m

Continued on next page2) Dimensions of the flanges per DIN 2501 / EN 1092-1, or ASME B16.5 or JISB2210-10K3) DN 65 / PN 16 with connection dimensions acc. EN 1092-1: Please order PN 404) Protection rings mounted on both sides and grounding ring

mounted on one side to flange, SST 1.4571 (316Ti)5) Only with laid length 1000 series, ASME / DIN flanges,

installation length = DN 100: L + 25 mm6) Material certificate for meter tube and flanges7) Sealing compound (optionally) D141B038U01


22

Electromagnetic Flowmeter Variant digit No. 1 - 6 15 16 17 18 19 20 21 22FSM4000-SE41F Catalog No. SE41F-remote sensor with welded flangeName PlateGerman adhesive foil GEnglish adhesive foil EFrench adhesive foil FGerman SST plate JEnglish SST plate KFrench SST plate LDesign Level (Specified by ABB) *Laid LengthStandard AElectrode DesignStandard 1Conical head, SST 1.4539 (904L) (>= DN 10) 8) 2Swedish design, material 1.4571 (316Ti) (DN 50 ... DN 100) 9) 3Swedish design, material 1.4571 (316Ti) (DN 125 ... DN 250) 9) 3Swedish design, material Hastelloy C-4 (DN 50 ... DN 100) 9) 3Swedish design, material Hastelloy C-4 (DN 125 ... DN 250) 9) 3

8) For application e.g. with high fat contents9) For pulp applications with high resin contents

Related Transmitter FSM4000-S4


23

Fixed flange, liner hard/soft rubber Electromagnetic Flowmeter Variant digit No. 1 - 6 7 8 9 10 11 12 13 14FSM4000-SE41F Catalog No. SE41F-remote sensor with welded flangeLiner Material Meter SizeHard rubber DN 15 1/2 in. H 1 5Hard rubber DN 20 3/4 in. H 2 0Hard rubber DN 25 1 in. H 2 5Hard rubber DN 32 1-1/4 in. H 3 2Hard rubber DN 40 1-1/2 in. H 4 0Hard rubber DN 50 2 in. H 5 0Hard rubber DN 65 2-1/2 in. H 6 5Hard rubber DN 80 3 in. H 8 0Hard rubber DN 100 4 in. H 1 HHard rubber DN 125 5 in. H 1 QHard rubber DN 150 6 in. H 1 FHard rubber DN 200 8 in. H 2 HHard rubber DN 250 10 in. H 2 FHard rubber DN 300 12 in. H 3 HHard rubber DN 350 14 in. H 3 FHard rubber DN 400 16 in. H 4 HHard rubber DN 450 18 in. (only ASME CL 150) H 4 FHard rubber DN 500 20 in. H 5 HHard rubber DN 600 24 in. H 6 HHard rubber DN 700 28 in. H 7 HHard rubber DN 800 32 in. H 8 HHard rubber DN 900 36 in. H 9 HHard rubber DN 1000 40 in. H 1 TSoft rubber DN 50 2 in. S 5 0Soft rubber DN 65 2-1/2 in. S 6 5Soft rubber DN 80 3 in. S 8 0Soft rubber DN 100 4 in. S 1 HSoft rubber DN 125 5 in. S 1 QSoft rubber DN 150 6 in. S 1 FSoft rubber DN 200 8 in. S 2 HSoft rubber DN 250 10 in. S 2 FSoft rubber DN 300 12 in. S 3 HSoft rubber DN 350 14 in. S 3 FSoft rubber DN 400 16 in. S 4 HSoft rubber DN 450 18 in. (only ASME CL 150) S 4 FSoft rubber DN 500 20 in. S 5 HSoft rubber DN 600 24 in. S 6 HSoft rubber DN 700 28 in. S 7 HSoft rubber DN 800 32 in. S 8 HSoft rubber DN 900 36 in. S 9 HSoft rubber DN 1000 40 in. S 1 T

Continued on next page


24

Electromagnetic Flowmeter Variant digit No. 1 - 6 10 11 12 13 14 15 16 17FSM4000-SE41F Catalog No. SE41F-remote sensor with welded flangeMeasuring Electrodes Material Grounding Electrodes 1)SST 1.4571 (316Ti) Without SHastelloy C-4 (2.4610) Without HHastelloy B-3 (2.4600) Without BTitanium Without MTantalum Without TSST 1.4539 (904L) Without FPlatinum-Iridium Without PHastelloy C-4 (2.4610) With OHastelloy B-3 (2.4600) With NSST 1.4571 (316Ti) With ETitanium With ITantalum With QSST 1.4539 (904L) With RPlatinum-Iridium With GPressure Rating 2)PN 10 ISO laid length CPN 16 ISO laid length 3) DPN 25 ISO laid length EPN 40 Standard for DN 3 ... DN 80 ISO laid length FJIS K10 ISO laid length KASME CL 150


25

Electromagnetic Flowmeter Variant digit No. 1 - 6 15 16 17 18 19 20 21 22FSM4000-SE41F Catalog No. SE41F-remote sensor with welded flangeDesignWithout pre-amplifier >= 20 μS/cm 1With pre-amplifier type A 2

Option >= 5 μS/cm and laid length max. 200 mWith pre-amplifier type B 4

Option >= 0,5 µS/cm and laid length max. 200 mName PlateGerman adhesive foil GEnglish adhesive foil EFrench adhesive foil FGerman SST plate JEnglish SST plate KFrench SST plate LDesign Level (Specified by ABB) *Laid LengthStandard AElectrode DesignStandard 1Conical head, SST 1.4539 (904L) 5) 2

5) For application e.g. with high fat contents

Related Transmitter FSM4000-S4 Pos: 31 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830


26

Pos: 32 /Überschriften/1/M - O/Modell SE21_ @ 3\mod_1157709057953_3101.doc @ 40875

4 Model SE21_ Pos: 33 /Überschriften/1.1/1-spaltig/S - U/Technische Daten @ 7\mod_1157704677334_3101.doc @ 40581

4.1 Technical data Pos: 34 /==== Wechsel ein- auf zweispaltig ==== @ 0\mod_1130421847171_3101.doc @ 3828 Wechsel ein-auf zweispaltig Pos: 35 /Technische Daten / Datenblatt/Durchfluss/FSM4000/Technische Daten/Messaufnehmer/Modell SE21_ @ 3\mod_1157640761823_3101.doc @ 40390

Minimum Allowable Absolute Pressure Liner Nominal size

DN POperation mbar abs

at TOperating* °C

PFA 3 … 100 (1/10 … 4“)

0 ≤ 130 °C (266 °F)

Peek/Torlon 1 …2 (1/25 … 1/12“)

0 ≤ 120 °C (248 °F)

1) Higher temperatures are allowed for CIP/SIP cleaning for limited time periods, see Table "Maximum Allowable Cleaning Temperature".

Maximum Allowable Cleaning Temperature

CIP-Cleaning Liner Tmax Tmax Minutes

Tamb.

Steam cleaning

PFA / Peek

150 °C (302 °F)

60

25 °C (77 °F)

Liquid cleaning PFA / Peek / Torlon

140 °C (284 °F)

60 25 °C (77 °F)

If the ambient temperature is > 25 °C (77 °F), then the difference must be subtracted from the max. cleaning temperature. Tmax – Δ °C, Δ °C = (TAmb - 25 °C) Maximum Allowable Temperature Shock

Liner Temp Shock max. Temp. Diff. °C

Temp. gradient °C/min

PFA any any Peek, Torlon any any

Maximum allowable ambient temperature as function of fluid temperature

Tamb °C (°F)

G00224

-40

60 (140)

40 (104)

-10(14)

-10(14F) DN 1 ... DN 2

DN

1..

.D

N2

90 (194) 120(248)

130(266)

-25 (-13)

TMeasuring°C (°F)

Fig. 22: Temperature graph The flowmeter sensor may not be isolated Fluid temperature DN 1 … DN 2 (1/25 ... 1/12") -10 … 120 °C (14 ... 248 °F), max. allowable cleaning temperature, see table

Flowmeter material Lining Electrode material Electrode design

Standard Options Standard Options PFA, Peek, Torlon

Hast.-C4 (2.4610) (1.4539 [904 L] for pipe

conn. and Tri-Clamp)

Hast.-B3 (2.4600)

SS 1.4539 (904 L)

SS 1.4571 (316 Ti)

Titanium, tantalum, platinum-

iridium

Flat head

Pointed head

(≥ DN 10) SS 1.4539

(904 L)

1/8" sanitary connectors always with 2 grounding electrodes in material for signal electrodes, standard. Process Connection Materials Process Connection Standard Option Flanges SS 1.4571 (316 Ti) on request Wafer design None Weld stubs SS 1.4404 (316 L) on request Threaded pipe connection SS 1.4404 (316 L) on request Tri-Clamp SS 1.4404 (316 L) on request External threads SS 1.4404 (316 L) on request 1/8" sanitary connectors SS 1.4571 (316 Ti) POM, brass,

PVC Connection box - without/with

preamplifier, type A - with preamplifier,

type B

SS 1.4301 (304) Al alloy, painted, paint coat frame: dark gray, RAL 7012 cover: light gray, RAL 9002

–

–

Meter tube SS 1.4301 (304) – Cable gland Polyamide PVDF Flowmeter sensor housing

SS 1.4301 (304) –

Gasket material (internal)

Process Connection

Standard Option

Wafer design None – Weld stubs Threaded pipe connection Tri-Clamp External threads

EPDM (Ethylene-Propylene) with FDA approval, silicone with FDA approval (CIP-resistant, no oils or grease)

Silicon with FDA approval (optional, resistant to oils and grease) PTFE with FDA approval (DN 3 ... 8)

1/8" sanitary connector

PTFE Viton (only in combination with PVC process connection)

Flat housing gaskets Silicon (resistant to oil, grease)

–


27

Storage Temperature -25 … 70 °C (-13 ... 158 °F) Protection Class per EN 60529 • IP 67 • IP 68 (option) Pipeline Vibration Following EN 60068-2-6 Transmitter - In the range of 10…55 Hz, max. deflection 0.15 mm Flowmeter sensor - In the range of 10…55 Hz, max. deflection 0.15 mm - In the range of 55…150 Hz, max. acceleration 2 g Materialload for meters with variable process connections / wafer flange SE21 DN 1 ... DN 100 (1/25 ... 4") Process connect. Liner PFA

Nominal size DN

PSmax [bar]

TSmin TSmax

Wafer design 3 … 50 (1/10 … 2“) 65 … 100

(2 1/2 … 4“)

40

16

-25 °C (-13 °F)

130 °C (266 °F)

Weld stubs 3 … 40 (1/10 … 1 1/2“)

50; 80 (2“, 3“) 65, 100

(2 1/2 … 4“)

40

16

10

-25 °C (-13 °F)

130 °C (266 °F)

Threaded pipe connection DIN 11851

3 … 40 (1/10 … 1 1/2“)

50; 80 (2“, 3“) 65, 100

(2 1/2 … 4“)

40

16

10

-25 °C (-13 °F)

130 °C (266 °F)

Tri-clamp acc. to DIN 32676

3 … 50 (1/10 … 2“) 65 … 100

(2 1/2 … 4“)

16

10

-25 °C (-13 °F)

121 °C (250 °F)

Tri-Clamp per ASME BPE 1

3 ... 100 (1/10 ... 4“)

10 -25 °C (-13 °F)

130 °C (266 °F)

External threads ISO 228

3 … 25 (1/10 … 1“

16

-25 °C (-13 °F)

130 °C (266 °F)

1/8" sanitary connector

1 … 2 (1/25 … 1/12“)

10 -10 °C (14 °F)

120 °C (248 °F)

Material load for flange model SE21F Lining: PFA

G00221

PS[bar]

TS

PN 40

PN 25

PN 16

PN 10

0

5

10

15

20

25

30

35

40

45

-30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 *) [°C]

-22 -4 14 32 50 68 86 104 122 140 158 176 194 212 230 248 266 *) [°F]

PS[psi]

0

72.5

145.0

217.5

290.0

362.5

435.0

507.5

580.0

652.5

Fig. 23: DIN-Flanges SS 1.4571 (316 Ti) to DN 100 (4") Liner PFA

G00222

PS[bar]

TS

CL 300

CL 150

0

5

10

15

20

25

30

35

40

45

50

55

-30 -10 10 30 50 70 90 110 130 *) [°C]

-22 14 50 86 122 158 194 230 266 *) [°F]

PS[psi]

72.5

145.0

217.5

290.0

362.5

435.0

507.5

580.0

652.5

725.0

697.5

0

Fig. 24: ASME flange SS 1.4571 (316 Ti) to DN 100 (4") JIS B2210-10K wafer flange

Meter size DN

Material PN TS PS [bar]

32 … 100 (1¼ … 4“)

SS 1.4404 (316 L) SS 1.4435 (316 L) SS 1.4301 (304)

10 -40 … 130 °C (-40 … 266 °F)

10

Material load for flange model SE21W Lining: PFA wafer flange

G00223

PS[bar]

TS

PN 40/CL 300

PN 25

PN 16/CL 150

PN 10

0

5

10

15

20

25

30

35

40

45

-60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120130 *) [°C]

-76 -58 -40 -22 -4 14 32 50 68 86 140122140158 176194 212 230248266 *) [°F]

PS[psi]

0

72.5

145.0

217.5

290.0

362.5

435.0

507.5

580.0

652.5

Fig. 25 Higher temperatures are allowed for CIP/SIP cleaning for limited time periods, see Table "Maximum Allowable Cleaning Temperature". Pos: 36 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830


28


Wechsel ein-auf zweispaltig Pos: 38.1 /Überschriften/1.1/1-spaltig/M - O/Maßzeichnungen @ 11\mod_1157707121639_3101.doc @ 40791

4.2 Dimensional drawings Pos: 38.2 /Technische Daten / Datenblatt/Durchfluss/FSM4000/Maßzeichnungen/Durchflussmesser SE21/Maßzeichnung Flansch SE21F, DN3-DN40 @ 3\mod_1157639602746_3101.doc @ 40243

4.2.1 Model SE21F

Stainless steel housing, flange acc. to DIN / EN 1092-1, DN 3 ... DN 40; ASME B16.5, 1/10 ... 1 1/2"

G00229

104 (4,09)

L

A

FE

G

b

80 (3,15)

41 (1,61)

k

D

FE

G

Ød

4

ØD

Ød2

71

(2,8

0)

1

2

Fig. 26: Dimensions in mm (inch) 1 Cable gland M20 x 1.5 or NPT 2 Number of holes N

Flange dimensions acc. to DIN / EN, liner PFA Weight mm DN PN

L1) A D k d4 d2 b E F G appr. kg

3 ... 83) 130 37 90 60 42 14 18 62 39 133 2.5 10, 15 200 37 90, 95 65 36 14 18 62 39 133 2.5

20 200 42 105 75 41 14 20 66 43 137 2.5 25 200 54 115 85 54 14 20 73 48 144 3 32 200 62 140 100 64 14 20 78 53 149 4 40

10 ... 40

200 67 150 110 74 14 20 82 57 153 4.5 inch DN PN

L1) A D k d4 d2 b E F G appr. lb

3 ... 83) 5.12 1.46 3.54 2.36 1.65 0.55 0.71 2.44 1.54 5.24 5.5 10, 15 7.7 1.46 3.54, 3.74 2.56 1.42 0.55 0.71 2.44 1.54 5.24 5.5

20 7.87 1.65 4.13 2.95 1.61 0.55 0.79 2.60 1.69 5.39 5.5 25 7.87 2.13 4.53 3.35 2.13 0.55 0.79 2.87 1.89 5.67 6.6 32 7.87 2.44 5.51 3.94 2.52 0.55 0.79 3.07 2.09 5.87 8.8 40

10 ... 40

7.87 2.64 5.91 4.33 2.91 0.55 0.79 3.23 2.24 6.02 9.9

1) If a grounding plate is required, L + 3 mm (0.12"). With 2 grounding plates (protection plates) L + 6 mm (0.24"), material upon request. 2) Connecting dimensions acc. to EN1092-1 3) Connection flange DN 10 (3/8") 4) Connection flange 1/2"


29

Flange dimensions acc. to ASME B16.5, liner PFA Weight

mm Inch PN L1) A D k d4 d2 b E F G

appr. kg

1/10 ... 5/164) 130 37 88.9 60.3 42.0 15.9 18.0 62 39 133 2.5

3/84), 1/2 200 37 88.9 60.3 34.8 15.9 12.6 62 39 133 2.5 3/4 200 42 98.4 69.8 42.9 15.9 14.2 66 43 137 2.5 1 200 54 108.0 79.2 50.8 15.9 15.8 73 48 144 3

1 1/4 200 62 117.5 88.9 63.5 15.9 17.4 78 53 149 3 1 1/2

CL 150

200 67 127.0 98.6 73.0 15.9 19.0 82 57 153 3.5 1/10 ... 5/164) 130 37 95.2 66.7 42.0 15.9 18.0 62 39 133 2.5

3/84), 1/2 200 37 95.2 66.7 34.8 15.9 15.8 62 39 133 2.5 3/4 200 42 117.5 82.5 42.9 19.0 17.4 66 43 137 2.5 1 200 54 123.8 88.9 50.8 19.0 19.0 73 48 144 3

1 1/4 200 62 133.3 98.4 63.5 19.0 20.5 78 53 149 4 1 1/2

CL 300

200 67 155.6 114.3 73.0 22.2 22.1 82 57 153 4.5 inch Inch PN

L1) A D k d4 d2 b E F G appr. lb

1/10 ... 5/164) 5.12 1.46 3.50 2.37 1.65 0.63 0.71 2.44 1.54 5.24 5.5

3/84), 1/2 7.87 1.46 3.50 2.37 1.37 0.63 0.50 2.44 1.54 5.24 5.5 3/4 7.87 1.65 3.87 2.75 1.69 0.63 0.56 2.60 1.69 5.39 5.5 1 7.87 2.13 4.25 3.12 2.00 0.63 0.62 2.87 1.89 5.67 6.6

1 1/4 7.87 2.44 4.63 3.50 2.50 0.63 0.69 3.07 2.09 5.87 6.6 1 1/2

CL 150

7.87 2.64 5.00 3.88 2.87 0.63 0.75 3.23 2.24 6.02 7.7 1/10 ... 5/164) 5.12 1.46 3.75 2.63 1.65 0.63 0.71 2.44 1.54 5.24 5.5

3/84), 1/2 7.87 1.46 3.75 2.63 1.37 0.63 0.62 2.44 1.54 5.24 5.5 3/4 7.87 1.65 4.63 3.25 1.69 0.75 0.69 2.60 1.69 5.39 5.5 1 7.87 2.13 4.87 3.50 2.00 0.75 0.75 2.87 1.89 5.67 6.6

1 1/4 7.87 2.44 5.25 3.87 2.50 0.75 0.81 3.07 2.09 5.87 8.8 1 1/2

CL 300

7.87 2.64 6.13 4.50 2.87 0.87 0.87 3.23 2.24 6.02 9.9

1) If a grounding plate is required, L + 3 mm (0.12"). With 2 grounding plates (protection plates) L + 6 mm (0.24"), material upon request. 2) Connecting dimensions acc. to EN1092-1 3) Connection flange DN 10 (3/8") 4) Connection flange 1/2" Pos: 38.3 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830


30

Pos: 38.4 /Technische Daten / Datenblatt/Durchfluss/FSM4000/Maßzeichnungen/Durchflussmesser SE21/Maßzeichnung Flansch SE21F, DN50-DN100 @ 12\mod_1189600221421_3101.doc @ 121613

Stainless steel housing, flange acc. to DIN / EN 1092-1, DN 50 ... DN 100; ASME B16.5, 2 ... 4"

G00230

A

d2

L

EE

G

80 (3,15)

41 (1,61)

G

b

71

(2,8

0)

1

2

Ød4

ØD

Fig. 27: Dimensions in mm (inch) 1 Cable gland M20 x 1.5 or NPT 2 Number of holes N

Flange dimensions acc. to DIN / EN, liner PFA Weight mm DN PN

L1) A D k d4 d2 N b E G appr. kg

50 10 ... 40 200 100 165 125 104 18 4 24 90 161 8 652) 10 ... 16

25 ... 40 200 200

107 107

185 185

145 145

124 124

18 18

4 8

26 26

105 105

176 176

10 10

80 10 ... 40 200 107 200 160 139 18 8 28 114 185 12 100 10 ... 16

25 ... 40 250 250

159 159

220 235

180 190

161 167

18 22

8 8

24 28

128 128

199 199

18 18

inch DN PN L1) A D k d4 d2 N b E G

appr. lb

50 10 ... 40 7.87 3.94 6.50 4.92 4.09 0.71 0.16 0.94 3.54 6.34 17.6 652) 10 ... 16

25 ... 40 7.87 7.87

4.21 4.21

7.28 7.28

5.71 5.71

4.88 4.88

0.71 0.71

0.16 0.31

1.02 1.02

4.13 4.13

6.93 6.93

22.0 22.0

80 10 ... 40 7.87 4.21 7.87 6.30 5.47 0.71 0.31 1.10 4.49 7.28 26.5 100 10 ... 16

25 ... 40 9.84 9.84

6.26 6.26

8.66 9.25

7.09 7.48

6.34 6.57

0.71 0.87

0.31 0.31

0.94 1.10

5.04 5.04

7.83 7.83

39.7 39.7

1) If a grounding plate is required, L + 3 mm (0.12"). With 2 grounding plates (protection plates) L + 6 mm (0.24"), material upon request. 2) For DN 65/PN 16 acc. to EN1092-1 please order PN 40.


31

Flange dimensions acc. to ASME B16.5, liner PFA Weight mm Inch PN

L1) A D k d4 d2 N b E G appr. kg

2 200 100 152 121 99 19 4 23 90 161 8 2 1/2 200 107 178 140 118 19 4 26 105 176 10

3 200 107 191 152 131 19 4 28 114 185 12 4

CL 150

250 159 229 190 171 19 8 28 128 199 18 2 200 100 165 127 102 19 8 26 90 161 8

2 1/2 200 107 191 149 124 22 8 29 105 176 10 3 200 107 210 168 143 22 8 32 114 185 12 4

CL 300

250 159 254 200 177 22 8 36 128 199 18 inch Inch PN

L1) A D k d4 d2 N b E G appr. lb

2 7.87 3.94 5.98 4.76 3.90 0.75 0.16 0.91 3.54 6.34 17.6 2 1/2 7.87 4.21 7.01 5.51 4.65 0.75 0.16 1.02 4.13 6.93 22.0

3 7.87 4.21 7.52 5.98 5.16 0.75 0.16 1.10 4.49 7.28 26.5 4

CL 150

9.84 6.26 9.02 7.48 6.73 0.75 0.31 1.10 5.04 7.83 39.7 2 7.87 3.94 6.50 5.00 4.02 0.75 0.31 1.02 3.54 6.34 17.6

2 1/2 7.87 4.21 7.52 5.87 4.88 0.87 0.31 1.14 4.13 6.93 22.0 3 7.87 4.21 8.27 6.61 5.63 0.87 0.31 1.26 4.49 7.28 26.5 4

CL 300

9.84 6.26 10.00 7.87 6.97 0.87 0.31 1.42 5.04 7.83 39.7

1) If a grounding plate is required. L + 3 mm (0.12"). With 2 grounding plates (protection plates) L + 6 mm (0.24"), material upon request. Pos: 38.5 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830


32

Pos: 38.6 /Technische Daten / Datenblatt/Durchfluss/FSM4000/Maßzeichnungen/Durchflussmesser SE21/Maßzeichnung Zwischenflansch SE21W, DN3-DN100 @ 3\mod_1157639606021_3101.doc @ 40264

4.2.2 Model SE21W

Stainless steel housing, wafer flange DN 3 ... DN 100 (1/10 ... 4") DN 3 ... DN 40 (1/10 ... 1½")

G00231

A

80 (3,15)

C

A*

B

G EF

L

J

DN 3 ... DN 8 (1/10 ... 5/16”)

41 (1,61)

4 x Ø5,5 (0,22”)

37

(1,4

6)

71

(2,8

0)

1

ØD

iØ

13.6

ØD

i

ØC

ØD

2

3

4

DN 50 ... DN 100 (2 ... 4")

G00459

G EF

A*L

ØD

ØD

i

ØC

80 (3,15)

41 (1,61)

71

(2,8

0)

1

Fig. 28: Dimensions in mm (inch) 1 Cable gland Pg 13.5 or NPT 2 Pattern for axial holes

3 Hole pattern 4 Mounting bracket (optional)


33

Wafer flange dimensions Weight

mm DN (inch) PN L1) A* A B C ØC ØDi ØD E F G J

appr. kg

3 (1/10) 4 (5/32) 6 (1/4)

8 (5/16) 10 (3/8) 15 (1/2)

68

64

37

28

50

42

3 4 6 8

10 13

45

62

39

172

28

32

1.5

20 (3/4) 78 74 42 28 50 50 18 54 66 43 205 32 2.0 25 (1) 90 86 42 46 70 59 24 63 73 48 219 32 2.0

32 (1 1/4) 98 94 42 46 70 69 30 73 78 53 229 32 2.5 40 (1 1/2) 103 99 42 46 70 77 36 82 82 57 237 32 3.0

50 (2)

10 ... 40 CL150 CL300

JIS

117 112 – 60 110 95 47 100 90 50 213 – 4.0 65 (2 1/2) 103 99 – 60 110 111 62 116 105 58 235 – 4.5

80 (3) 103 99 – 60 110 128 74 133 114 67 252 – 6.5 100 (4)

10 ... 16 CL150

JIS 133 129 – 60 110 155 96 160 128 80 279 – 8.5

inch DN (inch) PN L1) A* A B C ØC ØDi ØD E F G J

appr. lb

3 (1/10) 4 (5/32) 6 (1/4)

8 (5/16) 10 (3/8) 15 (1/2)

2.68

2.52

1.46

1.10

1.97

1.65

0.12 0.16 0.24 0.31 0.39 0.51

1.77

2.44

1.54

6.77

1.10

1.26

3.3

20 (3/4) 3.07 2.91 1.65 1.10 1.97 1.97 0.71 2.13 2.60 1.69 8.07 1.26 4.4 25 (1) 3.54 3.39 1.65 1.81 2.76 2.32 0.94 2.48 2.87 1.89 8.62 1.26 4.4

32 (1 1/4) 3.86 3.70 1.65 1.81 2.76 2.72 1.18 2.87 3.07 2.09 9.02 1.26 5.5 40 (1 1/2) 4.06 3.90 1.65 1.81 2.76 3.03 1.42 3.23 3.23 2.24 9.33 1.26 6.6

50 (2)

10 ... 40 CL150 CL300

JIS

4.61 4.41 – 2.36 4.33 3.74 1.85 3.94 3.54 1.97 8.39 – 8.8 65 (2 1/2) 4.06 3.90 – 2.36 4.33 4.37 2.44 4.57 4.13 2.28 9.25 – 9.9

80 (3) 4.06 3.90 – 2.36 4.33 5.04 2.91 5.24 4.49 2.64 9.92 – 14.3 100 (4)

10 ... 16 CL150

JIS 5.24 5.08 – 2.36 4.33 6.10 3.78 6.30 5.04 3.15 10.98 – 18.7

1) Installation lengths with 2 ground plates L + 3 mm (0.12")

Mounting bracket (optional) With mounting bracket, combined height + 37 mm (1.46") DN 3 ... DN 40 (1/10 ... 1½"), + 10.5 mm (0.41") DN 50 ... DN 100 (2 ... 4"). Pos: 38.7 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830


34

Pos: 38.8 /Technische Daten / Datenblatt/Durchfluss/FSM4000/Maßzeichnungen/Durchflussmesser SE21/Maßzeichnung Variabler Prozessanschluss SE21_, DN3-DN100 @ 3\mod_1157639609055_3101.doc @ 40285

4.2.3 Model SE21_

Variable process connection DN 3 ... DN 40 (1/10 ... 1½")

G00232

41 (1,61)

C

3 (0,12)

4 x Ø5.5

B

A

G

EF

104 (4,09)

80 (3,15)

ØD

71

(2,8

0)

37

(1,4

6)

80 (3,15)1

2

3

45

DN 50 ... DN 100 (2 ... 4")

G00233

3 (0,12)

(2 1/2 ... 4)

DN 65...100

B

104 (4,09)

G

EF

4 x Ø5.5 4 x Ø5.5C

DN 50 (2)

ØD

41 (1,61)

80 (3,15)80 (3,15)

71

(2,8

0)

10,5

(0,4

1)

1

6

25

4

3

Fig. 29: Dimensions in mm (inch) 1 Cable gland Pg 13.5 or NPT 2 Pattern for axial holes 3 Mounting bracket (optional)

4 Hole pattern 5 LPipe 6 Number of holes N


35

Variable process connection Weight

mm DN (inch) A ØD B C E F G LPipe N

appr. kg1)

3 ... 10 (1/10 ... 3/8) 37 44 28 50 62 39 172 85 – 1.5 15 (1/2) 37 44 28 50 62 39 172 85 – 1.5 20 (3/4) 42 63 28 50 66 43 180 90 – 2.0 25 (1) 42 63 46 70 73 48 192 105 – 2.0

32 (1 1/4) 42 78 46 70 78 53 202 120 – 2.5 40 (1 1/2) 42 78 46 70 82 57 210 125 – 3.0

50 (2) – 100 60 110 90 50 211 128 8 4.0 65 (2 1/2) – 116 60 110 105 58 234 114 10 4.5

80 (3) – 133 60 110 114 67 252 114 6 6.5 100 (4) – 160 60 110 128 80 279 114 6 9.0

inch DN (inch) A ØD B C E F G LPipe N

appr. lb1)

3 ... 10 (1/10 ... 3/8) 1.46 1.73 1.10 1.97 2.44 1.54 6.77 3.35 – 3.3 15 (1/2) 1.46 1.73 1.10 1.97 2.44 1.54 6.77 3.35 – 3.3 20 (3/4) 1.65 2.48 1.10 1.97 2.60 1.69 7.09 3.54 – 4.4 25 (1) 1.65 2.48 1.81 2.76 2.87 1.89 7.56 4.13 – 4.4

32 (1 1/4) 1.65 3.07 1.81 2.76 3.07 2.09 7.95 4.72 – 5.5 40 (1 1/2) 1.65 3.07 1.81 2.76 3.23 2.24 8.27 4.92 – 6.6

50 (2) – 3.94 2.36 4.33 3.54 1.97 8.31 5.04 0.31 8.8 65 (2 1/2) – 4.57 2.36 4.33 4.13 2.28 9.21 4.49 0.39 9.9

80 (3) – 5.24 2.36 4.33 4.49 2.64 9.92 4.49 0.24 14.3 100 (4) – 6.30 2.36 4.33 5.04 3.15 10.98 4.49 0.24 19.8

1) For process connection weights see page 36

Mounting bracket (optional) With mounting bracket, combined height +37 mm (1.46") DN 3 ... DN 40 (1/10 ... 1½"), +10.5 mm (0.41") DN 50 ... DN 100 (2 ... 4"). Pos: 38.9 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830


36

Pos: 38.10 /Technische Daten / Datenblatt/Durchfluss/FXE4000/Maßzeichnungen/Durchflussmesser DE21-23/Maßzeichnung Adapter für variable Anschlüsse @ 8\mod_1175156265359_3101.doc @ 75146

4.2.4 Adapter for variable process connections DN 3 ... DN 100 (1/10 ... 4")

G00072

L

Di

3

1

4

2

L

Di

Da

Da

L

L

R

a

Fig. 30

1 Weld stubs 2 Threaded pipe connection DIN 11851

3 Tri-Clamp 4 External threads

Weld stubs Weightmm

ISO 2037 DIN 11850 SMS DIN 2463 ISO 1127 DN (inch) Ø Di Ø Da Ø Di Ø Da Series Ø Di Ø Da Ø Di Ø Da Ø Di Ø Da Series L

kg

3 ... 10 (1/10 ... 3/8) 10.0 12.0 10 13 2 - - 10.3 13.5 10.3 13.5 1 127 0.4 15 (1/2) 15.2 17.2 16 19 2 - - 18.1 21.3 18.1 21.3 1 127 0.4 20 (3/4) 19.3 21.3 20 23 2 - - 23.7 26.9 23.7 26.9 1 132 0.7 25 (1) 22.6 25.0 26 29 2 22.6 25.0 25.0 28.0 23.7 26.9 1 149 0.7

32 (1 1/4) 31.3 33.7 32 34 1 - - 32.0 35.0 30.5 33.7 1 166 1.0 40 (1 1/2) 35.6 38.0 38 41 2 35.6 38.0 36.8 40.0 39.0 42.2 1 171 1.0

50 (2) 48.6 51.0 50 54 3 48.6 51.0 49.0 52.0 47.8 51.0 2 173 1.0 65 (2 1/2) 60.3 63.5 66 70 2 60.3 63.5 66.0 70.0 66.0 70.0 2 165 1.4

80 (3) 72.9 76.1 81 85 2 72.9 76.1 81.0 85.0 72.9 76.1 1 169 2 100 (4) 97.6 101.6 100 104 2 100.0 104.0 100.0 104.0 97.6 101.6 2 199 3

inch ISO 2037 DIN 11850 SMS DIN 2463 ISO 1127 DN (inch)

Ø Di Ø Da Ø Di Ø Da Series Ø Di Ø Da Ø Di Ø Da Ø Di Ø Da Series L lb

3 ... 10 (1/10 ... 3/8) 0.39 0.47 0.39 0.51 2 - - 0.41 0.53 0.41 0.53 1 5.00 0.9 15 (1/2) 0.60 0.68 0.63 0.75 2 - - 0.71 0.84 0.71 0.84 1 5.00 0.9 20 (3/4) 0.76 0.84 0.79 0.91 2 - - 0.93 1.06 0.93 1.06 1 5.20 1.5 25 (1) 0.89 0.98 1.02 1.14 2 0.89 0.98 0.98 1.10 0.93 1.06 1 5.87 1.5

32 (1 1/4) 1.23 1.33 1.26 1.34 1 - - 1.26 1.38 1.20 1.33 1 6.54 2.2 40 (1 1/2) 1.40 1.50 1.50 1.61 2 1.40 1.50 1.45 1.57 1.54

Documents

Data Sheet Electromagnetic Flowmeter D184S073U02 FSM4000...2004/02/07 · - Standardized installation lengths for DIN, ASME B16.5 or JIS B2210-10K flanges - Power supply AC/DC P R