MicroSol® 692XTPremium, High-lubricity, Low-foamMicroemulsion

TRIM® MicroSol® 692XT is a high-lubricity, semisynthetic,microemulsion coolant. This formula delivers extendedsump life, greater bio stability, and better foam controlversus previous generation semisyntheticMicroemulsions. It does very well in mixed metalsituations and is compatible with a very wide range ofmaterials including titanium, high nickel alloys, steels,copper, and aluminum alloys. Improved tramp oilrejection keeps your production running smoothly.Increase your profitability and production with TRIMMicroSol 692XT!

MicroSolFor ultimate performance:

TRIM® MicroSol® semisyntheticmicroemulsion coolants deliver high-performance lubricity and ultimatelylowers costs. Achieve precision parts,exceptional tool life, extended sumplife, assured regulatory compliance,and greater profitability with theMicroSol product just right for yourproduction.

Designed to meet the rigorousdemands of the aerospace, medical,automotive, or high production,precision parts manufacturingindustries, there's a MicroSol toanswer your concerns, ramp up yourproduction, and boost your bottomline.

Choose MicroSol 692XT:Improved lubricity for longer tool lifeDramatically extends useful life without theneed for tank-side biocides or fungicidesHalogen freeLow foaming for todays demanding high-pressure, high-volume applicationsExcellent alternative to chlorinated solubleoils on high-silica aluminum alloysProvides superior corrosion inhibition on allferrous and nonferrous metalsKeeps machines very clean while leaving asoft fluid film for ease of cleaning andreduced maintenanceRequires no special disposal or recyclingtechniques

MicroSol 692XT especially for:Applications — band sawing, cylindrical formgrinding, drilling, high-pressure, high-volume,internal grinding, plain grinding, reaming, rollthreading, surface grinding, surface milling,tapping, thread forming, through-feedcenterless grinding, and turningMetals — 6000 series aluminum, aerospacealuminum alloys, aluminum alloys, brass,bronze, cast aluminum, cast iron, composites,copper, copper alloys, exotic alloys, glass,heat-treated steel, high-carbon steel, high-nickel alloys, high-silica aluminum alloys,nonferrous metals, plastics, stainless steels,steels, titanium, and wrought aluminumIndustries — aerospace, automotive,bearing, compressor, diecast, energy,firearms & ammunitions, green, job shop,machine tool manufacturers, and medicalMicroSol 692XT is free of — chlorine, NPEs,and sulfonates

MicroSol® 692XTPremium, High-lubricity, Low-foamMicroemulsion

Application GuidelinesPerforms well where traditional soluble oils may not cool sufficiently.In mixed-metal situations, concentration control is critical to fightgalvanic corrosion (7.5% plus).Running at or above 7.5% offers the best sump life and corrosioninhibition on cast iron chips.Not recommended for use on very reactive metals such asmagnesium.For additional product application information, includingperformance optimization, please contact your Master FluidSolutions' Authorized Distributor at https://www.2trim.us/distributors.php, your District Sales Manager,or call our Tech Line at 1-800-537-3365.

Physical Properties Typical DataColor (Concentrate)Color (Working Solution) White MicroemulsionOdor (Concentrate) Mild amineForm (Concentrate) LiquidFlash Point (Concentrate) (ASTM D93-08) > 225°FpH (Concentrate as Range) 9.6 - 10.0pH (Typical Operating as Range) 8.8 - 9.6Coolant Refractometer Factor 1.0Titration Factor (CGF-1 Titration Kit) 0.63Digital Titration Factor 0.0173V.O.C. Content (ASTM E1868-10) 41 g/l

Recommended Metalworking ConcentrationsLight duty 5.0% - 6.5%Moderate duty 6.5% - 8.5%Heavy duty 8.5% - 10.0%Design Concentration Range 5.0% - 10.0%

Concentration by % Brix

10.0

8.8

7.5

6.3

5.0

% C

once

ntra

tion

5.0 6.3 7.5 8.8 10.0

Refractive Reading

% Concentration = Refractive Reading x RefractiveFactor

Coolant Refractometer Factor % Brix = 1.0

Concentration by Titration

10.08

8.82

7.56

6.30

5.04

% C

once

ntra

tion

8 10 12 14 16

Number of Drops

% Concentration = No. of Drops x Titration FactorTitration Factor = 0.63

Health and SafetySee the most recent SDS athttps://2trim.us/s/?i=5054-0-en-US-US

MicroSol® 692XTPremium, High-lubricity, Low-foamMicroemulsion

Mixing InstructionsRecommended usage concentration in water: 5.0% - 10.0%.To help ensure the best possible working solution, add the requiredamount of concentrate to the required amount of water (never thereverse) and stir until uniformly mixed.Use premixed coolant as makeup to improve coolant performanceand reduce coolant purchases. The makeup you select shouldbalance the water evaporation rate with the coolant carryout rate.Use our Coolant Makeup Calculator to find the best ratio for yourmachine: apps.masterfluidsolutions.com/makeup/.Use mineral-free water to improve sump life and corrosion inhibitionwhile reducing carryoff and concentrate usage.

1-gallon jugSKU: MS692XT/1

UPC-12: 641238080138

5-gallon pailSKU: MS692XT/5

UPC-12: 641238080121

54-gallon drumSKU: MS692XT/54

UPC-12: 641238080114

270-gallon toteSKU: MS692XT/NR270PUPC-12: 641238080145

TRIM® MicroSol® 692XT | ©2020 Master Fluid Solutions® | 2020-07-29

Additional InformationUse Master STAGES™ Whamex™ for aquick and thorough precleaning of yourmachine tool and coolant system.Consult Master Fluid Solutions before usingon any metals or applications notspecifically recommended.This product should not be mixed withother metalworking fluids or metalworkingfluid additives, except as recommended byMaster Fluid Solutions, as this may reduceoverall performance, result in adversehealth effects, or damage the machine tooland parts. If contamination occurs, pleasecontact Master Fluid Solutions forrecommended action.TRIM® and MicroSol® are registeredtrademarks of Master Chemical Corporationd/b/a Master Fluid Solutions.Master STAGES™ and Whamex™ aretrademarks of Master Chemical Corporationd/b/a Master Fluid Solutions.The information herein is given in goodfaith and believed current as of the date ofpublication and should apply to the currentformula version. Because conditions of useare beyond our control, no guarantee,representation, or warranty expressed orimplied is made. Consult Master FluidSolutions for further information. For themost recent version of this document,please go to this URL:

https://2trim.us/di/?plr=MS692XT*en-us*na

501 West Boundary StreetPerrysburg, OH 43551-1200USA+1 419-874-7902

info@masterchemical.com

masterfluidsolutions.com/na/en-us/

Powered by TCPDF (www.tcpdf.org)