Upload
danobat
View
223
Download
1
Embed Size (px)
DESCRIPTION
RPD 3D Plasma Cutting solutions PLASMA HEAD / DISPLACEMENT UNITS FASTENING CLAMPS • 3D design and simulation of programmed job. • Programming in three ways: Importing files (DSTV, CAM, SAT, ...), pre-designed macros and free programming. • Automatic and/or manual Nesting .• Maximum use of scraps. • Data store and stock control.
Citation preview
3D Plasma Cutting solutionsRPD
• Plasma head is placed inside a rigid structure calculated by the finite elements method.• 7 axes CNC:
• 4 lineal axes: displacement units + feeding gripper
• 3 rotative axes: torch
• The 3 lineal axes X,Y,Z are divided into the longitudinal axe (X), performed by rack and pinion, driven by a servomotor with absolute encoder. The transversal (Y) and the vertical axes (Z) are fitted with ground high precision rolled thread ballscrews and servomotors with absolute encoder.
• Robust horizontal and vertical clamps, at the entrance and at the exit.
• Clamps are closed hydraulically, regardless of material shape and dimensions.
• Clamps are sensored for material width and height.
• Verification of the measured sizes against the programmed ones.
Los carros de desplazamiento están guiados mediante dos guías lineales accionados mediante un sistema de husillo de bolas rectificado y motor brushless.
Para un mejor amarre y mejor precisión durante el taladrado el T3CH dispone de robustas mordazas horizontales y 4 mordazas verticales accionadas mediante cilindros hidráulicos.
• 3D design and simulation of programmed job.
• Programming in three ways: Importing files (DSTV, CAM, SAT, ...), pre-designed macros and free programming.
• Automatic and/or manual Nesting
.• Maximum use of scraps.
• Data store and stock control.
P L A S M A H E A D / D I S P L A C E M E N T U N I T S F A S T E N I N G C L A M P S
TORCH S O F T WA R E
• The torch is mounted on a head with 3 rotatory axes (A,B,C).
• Driven by special motors designed for robotic industry. Special reduction system is applied.
• The torch incorporates a palpation system, with the aim of measuring the exact position of the piece to cut after positioning and clamping it.
• System patented by DANOBAT.
E X A M P L E SEXAMPLES
© -
DAN
OB
AT -
2011
This
docu
men
t is n
ot a
con
trac
t. D
ANO
BAT
rese
rves
the
right
of m
akin
g ch
ange
s to
all m
odel
s with
out p
rior n
otic
e. T
he il
lust
ratio
n in
this
cata
logu
e re
mai
n pr
oper
ty o
f DAN
OBA
T. 0
4/20
11
DANOBATArriaga kalea, 21 - P.O. Box: 28E-20870 ELGOIBAR (Gipuzkoa) Spain
Drilling unitsMitre cutting Horizontal cuttingComplete solutions Vertical cutting
O T H E R S A W I N G A N D D R I L L I N G S O L U T I O N S
Tel.: + 34 943 74 81 50 / +34 943 74 80 44Fax: + 34 943 74 81 [email protected]