Embed Size (px)
Citation preview
Target Job
Personal Information
(3 Years, 11 Months) Experience Firefighting Engineer
At Al Khat Al Momayez Safety Equipment Installation L.L.C
Location: Dubai, United Arab Emirates Company Industry: Engineering
Job Role: Firefighting Engineer (Present)
1. Revit and CAD proficient with fire protection drawings 2. Lead and mentor fire protection designer level staff on all of their responsibilities 3. Apply engineering principles and fundamentals of fire protection design including but not limited to fire pump calculations, pipe sizing, gas suppression, deluge, pre-action systems, and high-rise design 4. Apply risk management procedures daily to minimize exp’s and client’s exposure to problems Thorough understanding of many NFPA code sections, and variations from year to year 5. Working knowledge of Factory Mutual standards and requirements and the ability to negotiate alternatives and review compliance 6. Critically evaluate contractor pricing and cost estimates 7. Provide quality reviews of designer’s work 8. Perform front-end loading of fire protection systems for projects with project managers. 9. Performing fire protection analysis involving occupancy, hazards, economic analysis
YOUNES GHASSAN AL TAHHAN Electrical engineer
Location: Sharjah, United Arab Emirates Education: Bachelor's degree in Electrical Engineering Competence of
Automatic Control and Computers Experience: 3 Years, 11 Months Passed the fire protection engineering written examination administered by the
National Council of Examiners for Engineering and Surveys (NCEES)
With non-objection can join immediately Email Address: [email protected]
Mobile Phone: +971.552407800/+971.506713374
Address: UAE-Sharjah- Mega Mall
Instrumentation engineering,PLCs/RTUs, Robotic & SCADA,Digital Electronics, Microprocessor & Microcontroller Target Job Title:
To gain a dynamic and challenging role in the area of electronics, instrumentation, and communication engineering that will offer be the
best opportunity for further development of my abilities, skills and g term career growth knowledge in an established firm with lon
possibilities
Career Objective:
Contractor Employment Type:
Full time Employment Status: Career-Mid Career Level:
)61 November 1988 (Age: 2 Birth Date: Male Gender:
Syria Nationality: isaVesident R Visa Status:
Single Marital Status: Syria Driving License Issued From:
10. Ability to perform computer simulations and evaluate options for system design 11. Writes studies and reports for fire protection systems on various projects 12. Attend design team meetings and provide the correct and reasonable interpretation without extensive research 13. QC reviews of all calculations and correspondence by designers, and provide guidance and mentoring 14. Contributes to revisions of standards and master specifications
Electrical engineer
At Bwabt Al Sham for Engineering Constructions, Abu Dhabi, UAE
Location: Abu Dhabi, United Arab Emirates
Company Industry: Engineering
Job Role: Electrical Engineer (February 2013 - December 2013)
1. Estimation, Quotation, LPO preparation, price negotiation 2.Liaising with clients, suppliers, contractors and relevant authorities. 3. Monitoring and recording inspections, tests, work executed etc. 4.Reading PID & Engineering Drawings. 5. Supervising electrical jobs based on shop drawings and specifications. 6. Ensuring the availability of adequate quantity of electrical material 7.Checking material delivered are as submitted approved and properly stored. 8. Reporting maintenance statistics, outage and breakdown details to Management. 9. Committed to work in project deadlines and schedules. 10. Ensuring implementation of all technical and safety requirements and verification of commercial issues, guiding, coordinating and reporting progress of works. 11. Ensures compliance with required design and drafting standards and specifications. 12. Create and document Job Hazard Analysis’s (JHA’s) - includes cold work, hot work, breaking containment, confined work etc. 13. Preparing weekly and monthly progress reports and assesses them against the project schedule. 14. Checking all installations in preliminary stage. 15. Negotiating with client and consultant for obtaining approvals for requested modifications. 16. Ensuring work is executed according to contract specifications, approved design drawings, agreed procedures, and method statements.
17. Implementing strict adherence to safety rules and regulations. 18. Engineer calculating quantities and is responsible for Musanada tenders.
PLC/RTU Trainee Engineer (Part Time) At Advanced Technology for Solutions and Resources
Location: Latakia, Syria
Company Industry: Engineering
Job Role: Engineering (September 2009 - October 2012)
1. Creates basic P&IDs and Instrumentation diagrams etc. from rough sketches and/or from general engineering and design information according to established standards and procedures. 2. Providing the specifications and engineering documents which detail all engineering aspects for the project execution and instrument/system configuration, programming, commissioning and integration. 3. Create, submit, review, change and approve engineering documentation (e.g. wiring diagrams, setting list, etc.) 4. Calculation of material requirements and technical specifications in accordance with local and international norms and standards 5. Technical description of the processes, system description (Functional Design Specification, Bill of Material) 6. Plant documentation (P&ID, I/O wiring, electrical schematics, etc.)
Education
Skills Programming by C, C++, and Assembly and Pascal languages
Level: Intermediate | Experience: 5 years or less | Last Used: 1 year or less
Outlook Support Level: Intermediate | Experience: 5 years or less | Last Used: 1 month or less
Software installation and rebooting Level: Intermediate | Experience: 5 years or less | Last Used: 1 month or less
System hardware maintenance Level: Intermediate | Experience: 5 years or less | Last Used: 1 month or less
Automation using Micro PLCs (Siemens LOGO).
Level: Intermediate | Experience: 5 years or less | Last Used: 3 months or less
Siemens (S7-300/400) Programming and Application
Level: Intermediate | Experience: 5 years or less | Last Used: 6 months or less
Create pages by HTML languages and designing by computer
Level: Intermediate | Experience: 5 years or less | Last Used: More than 1 year
Good experience dealing with MATLAB program (Especial GUI)
Level: Intermediate | Experience: 5 years or less | Last Used: More than 1 year
Microsoft Office competency: Outlook, Word, Excel, PowerPoint, Project
Level: Intermediate | Experience: 5 years or less | Last Used: 3 months or less
Helpdesk Support Hardware/Software installation, Configuration and Protections
Level: Intermediate | Experience: 5 years or less | Last Used: More than 1 year
AutoCAD Electrical
Level: Intermediate | Experience: 5 years or less | Last Used: 1 month or less
Ecodial Advance Calculation
Level: Intermediate | Experience: 1 year or less | Last Used: 1 month or less
REVIT MEP
Level: Beginner | Experience: 1 year or less | Last Used: 1 month or less
7. Hardware and Software component specification 8.Configuration and dimensioning of instrumentation and control equipment 9. PLC, Robot & HMI programming, implementation and troubleshooting. 10. PLCs/RTUs, Robotic & SCADA Digital Electronics, Microprocessor & Microcontroller Computer architecture (servicing and network) 11. Automation Engineering Siemens (S7-300/400) Programming and Application. 12. Electrical LV and MV switchboards and reticulation systems. 13. Interpret and navigate through control system logic diagrams and codes. 14. Daily supervision, execution and monitoring of electrical works.
Bachelor's degree in Electrical Engineering Competence of Automatic Control and Computers
At Al Baath University Location: Homs, Syria Completion Date : November 2012
Grade: 77.79 out of 100
BS in Electrical Engineering ( 2008 - 2012 )
Competence to Computers and Automatic Control Faculty of Mechanical & Electrical Engineering
Electrical/electronic/software engineer with knowledge of operation & maintenance of
control systems, PLCs/RTUs, Robots and safety systems Experience with PLCs, Robots, Networks, IT & PC systems and instrumentation.
Oracle - PRIMAVERA PROJECT PLANNER P6
Level: Intermediate | Experience: 1 year or less | Last Used: 1 month or less
Languages
English
Level: Intermediate | Experience: 5 years or less | Last Used: 1 month or less
Arabic
Mother Tongue
Memberships
Syrian Red Crescent
Membership/Role: Beginner Member since: August 2009
Attachments
