VAN ELLE LIMITED

Kirkby Lane Pinxton Nottinghamshire NG16 6JA Tel:01773 580580 Fax:01773 862100

www.van-elle.co.uk Page 1 of 3

KLEMM KR 709

Crawler Mounted Hydraulic Rotary Bored Piling Rig

Machine in Vertical Working Mode

Machine Weight 11.8 Tonnes

Track Width 500mm

Track Length (in contact with ground) 2700mm

Bearing Pressure whilst tracking 42.87 kN/m2

5400mm

5000mm

VAN ELLE LIMITED

Kirkby Lane Pinxton Nottinghamshire NG16 6JA Tel:01773 580580 Fax:01773 862100

www.van-elle.co.uk Page 2 of 3

KLEMM KR 709

Crawler Mounted Hydraulic Rotary Bored Piling Rig

Machine in Tracking Mode – mast

in horizontal position The Klemm 709 delivers nearly 3.5 tonne-meters of torque which enables this powerful rig to install piles of up to 600mm in diameter into some of the

stiffest soils.

We are capable of installing rock sockets with our 708 and 709 rigs into weak and moderately weak rock to give nominal working loads of up to 1000kN in certain conditions.

The rigs are delivered on our specially design beavertail rigid wagons which

means that not only can we access the most restricted pile positions, we can access via some very restricted roads and lanes as well.

5200mm

3060

mm

VAN ELLE LIMITED

Kirkby Lane Pinxton Nottinghamshire NG16 6JA Tel:01773 580580 Fax:01773 862100

www.van-elle.co.uk Page 3 of 3

KLEMM KR 709

Crawler Mounted Hydraulic Rotary Bored Piling Rig

2400mm