Craftsman Garden Tractor 917287451

Operator's Manual

CRAFrSMANGAR26.0 HP, 54"Electric Start

TRACTOMower

6 Speed Transaxle

Model No.917.28745

Espahol, p. 35

This product has a low emission engine which operates[[[_ differently from previously built engines. Before start theyou

engine, read and understand this Owner's Manual.

IMPORTANT:Read and follow all SafetyRules and Instructions beforeoperating this equipment,

For answers to your questionsabout this product, Call:t -800-659-59 t 7Sears Craftsman Help Line5 am - 5 pm, Mon - Sat

SEARS, ROEBUCK AND CO., HOFFMAN ESTATES, IL 60179 U.S.A.Visit our Craftsman website:www.sears.com/craftsman

Warranty ................................................ 2 Maintenance ........................................ 19Safety Rules .......................................... 3 Service and Adjustments ..................... 23Product Specifications ........................... 6 Storage ................................................ 30Assembly/Pre-Operation ....................... 8 Troubleshooting ................................... 31Operation ............................................. 12 Sears Service ........................ Back CoverMaintenance Schedule ........................ 19

LIMITED WARRANTY ON CRAFTSMAN TRACTOR AND BATTERY2-YEAR ON TRACTORWhen used and maintained according to the operator's manual instructions, if this tractorfails due to a defect in material or workmanship within two years from the date of pur-chase, call 1-800-4-MY-HOME to arrange for free repair.During the first 30 days of purchase, there will be no charge to service the product inyour home. For your convenience, in-home warranty service will still be available afterthe first 30 days of purchase, but a trip charge will apply. This charge will be waived ifyou transport the product to an authorized Craftsman drop-off location. For the nearestauthorized location, call 1-800-4-MY-HOME.

Tractor warranty coverage does not include: Expendable items which become worn during normal use, including but not limited to

blades, spark plugs, air cleaners, belts, and oil filters., Standard maintenance servicing, oil changes, or tune-ups. Tire replacement or repair caused by punctures from outside objects, such as nails,

thorns, stumps, or glass. Repairs necessary because of operator abuse, including but not limited to damage

caused by towing objects beyond the capability of the tractor, impacting objects thatbend the frame or crankshaft, or over-speeding the engine.

, Repairs necessary because of operator negligence, including but not limited to electri-cal and mechanical damage caused by improper storage, failure to use the propergrade and amount of engine oil, failure to keep the deck clear of flammable debris,or failure to maintain the equipment according to the instructions contained in theoperator's manual.

, Engine (fuel system) cleaning or repairs necessary because of fuel determined to becontaminated or oxidized (stale). In general, fuel should be used within 30 days of itspurchase date.

Normal deterioration and wear of the exterior finishes, or product label replacement., The tractor battery, which is covered for only 90 days as stated below.90-DAYS ON BATTERYFor ninety (90) days from the date of purchase, if the battery included with this tractor isdefective in material or workmanship (our testing proves it will not hold a charge), it willbe replaced free of charge.

During the first 30 days of purchase, there will be no charges to replace the battery inyour home. For your convenience, in-home warranty service will still be available afterthe first 30 days of purchase, but a trip charge will apply. This charge will be waived ifyou transport the battery to an authorized Craftsman drop-off location. For the nearestauthorized location, call 1-800-4-MY-HOME.

All tractor and battery warranty coverage is void if this product is used for commercial orrental purposes.

This warranty applies only while this product is within the United States.

This warranty gives you specific legal rights, and you may also have other rights, whichvary, from state to state.

SEARS, ROEBUCK AND CO., HOFFMAN ESTATES, IL 60179

_I, DANGER: This cutting machine is capable of amputating hands and feet andthrowing objects. Failure to observe the following safety instructions could resultin serious injury or death.

,_WARNING: In order to prevent ac-cidental starting when setting up, trans-porting, adjusting or making repairs,always disconnect spark plug wire andplace wire where it cannot contact sparkplug._I_WARNING: Do not coast down a hill inneutral, you may lose control of the tractor.,_WARNING: Tow only the attachmentsthat are recommended by and comply withspecifications of the manufacturer of yourtractor. Use common sense when towing.Operate only at the lowest possible speedwhen on a slope. Too heavy of a load,while on a slope, is dangerous. Tires canlose traction with the ground and causeyou to lose control of your tractor._,WARNING: Engine exhaust, some ofits constituents, and certain vehicle com-ponents contain or emit chemicals knownto the State of California to cause cancerand birth defects or other reproductiveharm._I, WARNING: Battery posts, terminalsand related accessories contain lead andlead compounds, chemicals known to theState of California to cause cancer andbirth defects or other reproductive harm.Wash hands after handling.

I. GENERAL OPERATION* Read, understand, and follow all instruc-

tions on the machine and in the manualbefore starting.

* Do not put hands or feet near rotatingparts or under the machine. Keep clearof the discharge opening at all times.

* Only allow responsible adults, who arefamiliar with the instructions, to operatethe machine.

* Clear the area of objects such as rocks,toys, wire, etc., which could be pickedup and thrown by the blades.

* Be sure the area is clear of bystand-ers before operating. Stop machine ifanyone enters the area.

* Never carry passengers., Do not mow in reverse unless abso-

lutely necessary. Always look down andbehind before and while backing.

Never direct discharged material towardanyone. Avoid discharging materialagainst a wall or obstruction. Materialmay ricochet back toward the operator.Stop the blades when crossing gravelsurfaces.Do not operate machine without theentire grass catcher, discharge guard, orother safety devices in place and work-ing.Slow down before turning.Never leave a running machine unat-tended. Always turn off blades, setparking brake, stop engine, and removekeys before dismounting.Disengage blades when not mowing.Shut off engine and wait for all parts tocome to a complete stop before clean-ing the machine, removing the grasscatcher, or unclogging the dischargeguard.Operate machine only in daylight orgood artificial light.Do not operate the machine while underthe influence of alcohol or drugs.Watch for traffic when operating near orcrossing roadways.Use extra care when loading or unload-ing the machine into a trailer or truck.Always wear eye protection when oper-ating machine.Data indicates that operators, age 60years and above, are involved in a largepercentage of riding mower-related in-juries. These operators should evaluatetheir ability to operate the riding mowersafely enough to protect themselves andothers from serious injury.

Follow the manufacturer's recommen-dation for wheel weights or counter-weights.

Keep machine free of grass, leaves orother debris build-up which can touchhot exhaust / engine parts and burn. Donot allow the mower to plow leaves orother debris which can cause build-upto occur. Clean any oil or fuel spillagebefore operating or storing the machine.Allow machine to cool beforestorage.

3

II. SLOPE OPERATIONSlopes are a major factor related to loss ofcontrol and tip-over accidents, which canresult in severe injury or death. Opera-tion on all slopes requires extra caution. Ifyou cannot back up the slope or if you feeluneasy on it, do not mow it., Mow up and down slopes, not across. Watch for holes, ruts, bumps, rocks, or

other hidden objects. Uneven terraincould overturn the machine. Tall grasscan hide obstacles.

, Choose a low ground speed so that youwill not have to stop or shift while on theslope.

, Do not mow on wet grass. Tires maylose traction.Always keep the machine in gear whengoing down slopes. Do not shift to neu-tral and coast downhill.

Avoid starting, stopping, or turning on aslope. If the tires lose traction, disen-gage the blades and proceed slowlystraight down the slope.

, Keep all movement on the slopes slowand gradual. Do not make suddenchanges in speed or direction, whichcould cause the machine to roll over.

, Use extra care while operating machinewith grass catchers or other attach-ments; they can affect the stability of themachine. Do no use on steep slopes.

, Do not try to stabilize the machine byputting your foot on the ground.

, Do not mow near drop-offs, ditches,or embankments. The machine couldsuddenly roll over if a wheel is over theedge or if the edge caves in.

Ill. CHILDRENTragic accidents can occur if the operatoris not alert to the presence of children.Children are often attracted to the machineand the mowing activity. Never assumethat children will remain where you lastsaw them. Keep children out of the mowing area

and in the watchful care of a responsibleadult other than the operator.

Be alert and turn machine off if a childenters the area.

, Before and while backing, look behindand down for small children.

, Never carry children, even with theblades shut off. They may fall off andbe seriously injured or interfere withsafe machine operation. Children whohave been given rides in the past maysuddenly appear in the mowing area foranother ride and be run over or backedover by the machine.

Never allow children to operate themachine.

, Use extra care when approaching blindcorners, shrubs, trees, or other objectsthat may block your view of a child.

IV. TOWING Tow only with a machine that has a

hitch designed for towing. Do not attachtowed equipment except at the hitchpoint.

Follow the manufacturer's recommenda-tion for weight limits for towed equip-ment and towing on slopes.

Never allow children or others in or ontowed equipment.

On slopes, the weight of the towedequipment may cause loss of tractionand loss of control.

, Travel slowly and allow extra distance tostop.

V. SERVICESAFE HANDLING OF GASOLINETo avoid personal injury or propertydamage, use extreme care in handlinggasoline. Gasoline is extremely flammableand the vapors are explosive., Extinguish all cigarettes, cigars, pipes,

and other sources of ignition. Use only approved gasoline container., Never remove gas cap or add fuel with

the engine running. Allow engine to coolbefore refueling.

, Never fuel the machine indoors., Never store the machine or fuel con-

tainer where there is an open flame,spark, or pilot light such as on a waterheater or other appliances.

Never fill containers inside a vehicle oron a truck or trailer bed with plastic liner.Always place containers on the groundaway from your vehicle when filling.

Remove gas-powered equipment fromthe truck or trailer and refuel it on theground. If this is not possible, then refuelsuch equipment with a portable contain-er, rather than from a gasoline dispensernozzle.Keep the nozzle in contact with the rimof the fuel tank or container opening atall times until fueling is complete. Do notuse a nozzle lock-open device.If fuel is spilled on clothing, changeclothing immediately.Never overfill fuel tank. Replace gas capand tighten securely.

GENERAL SERVICE Never operate machine in a closed

area.

Keep all nuts and bolts tight to be surethe equipment is in safe working condi-tion.

Never tamper with safety devices.Check their proper operation regularly.

, Keep machine free of grass, leaves, orother debris build-up. Clean oil or fuelspillage and remove any fuel-soakeddebris. Allow machine to cool beforestoring.

, If you strike a foreign object, stop andinspect the machine. Repair, if neces-sary, before restarting.

, Never make any adjustments or repairswith the engine running.

Check grass catcher components andthe discharge guard frequently and re-place with manufacturer's recommendedparts, when necessary.

, Mower blades are sharp. Wrap theblade or wear gloves, and use extra cau-tion when servicing them.

, Check brake operation frequently. Ad-just and service as required.

Maintain or replace safety and instruc-tion labels, as necessary.

Be sure the area is clear of bystand-ers before operating. Stop machine ifanyone enters the area.

, Never carry passengers. Do not mow in reverse unless abso-

lutely necessary. Always look down andbehind before and while backing.

Never carry children, even with theblades shut off. They may fall off andbe seriously injured or interfere withsafe machine operation. Children whohave been given rides in the past maysuddenly appear in the mowing area foranother ride and be run over or backedover by the machine.

, Keep children out of the mowing areaand in the watchful care of a respon-sible adult other than the operator.

, Be alert and turn machine off if a childenters the area.

, Before and while backing, look behindand down for small children.

, Mow up and down slopes (15 Max), notacross.

Choose a low ground speed so that youwill not have to stop or shift while on theslope.

, Avoid starting, stopping, or turning on aslope. If the tires lose traction, disen-gage the blades and proceed slowlystraight down the slope.

, If machine stops while going uphill,disengage blades, shift into reverse andback down slowly.

, Do not turn on slopes unless neces-sary, and then, turn slowly and graduallydownhill, if possible.

5

PRODUCT SPECiFiCATiONS

Gasoline Capacity 4 Gallonsand Type: Unleaded RegularOil Type SAE 10W30(above 32F)API-SG-SL): SAE 5W30(below 32F

Oil Capacity: w/Filter: 64 ozSpark Plug: Champion RC12YC

Ground Speed(MPH):

(Gap: .030")Forward:

1st 1.582nd 1.143rd 1.774th 2.655th 3.386th 4.33

Reverse: 1.33

15 Amps @ 3600 RPMAmp/Hr: 35Min. CCA: 280Case size: U1R

Charging System:Battery:

Blade Bolt Torque: 45-55 Ft. Lbs.

CONGRATULATIONS on your purchaseof a new tractor. It has been designed,engineered and manufactured to giveyou the best possible dependability andperformance.Should you experience any problem youcannot easily remedy, please contact aSears or other qualified service center.We have competent, well-trained techni-cians and the proper tools to service orrepair this tractor.Please read and retain this manual. Theinstructions will enable you to assembleand maintain your tractor properly. Alwaysobserve the "SAFETY RULES".

CUSTOMER RESPONSIBILITIES, Read and observe the safety rules. Follow a regular schedule in main-

taining, caring for and using your tractor., Follow the instructions under "Mainte-

nance" and "Storage" sections of thisowner's manual.

_,WARNING: This tractor is equippedwith an internal combustion engine andshould not be used on or near any unim-proved forest-covered, brush-covered orgrass-covered land unless the engine'sexhaust system is equipped with a sparkarrester meeting applicable local or statelaws (if any). If a spark arrester is used, itshould be maintained in effective workingorder by the operator.

In the state of California the above is re-quired by law (Section 4442 of the Califor-nia Public Resources Code). Other statesmay have similar laws. Federal laws applyon federal lands. A spark arrester for themuffler is available through your nearestSears service center (See REPAIR PARTSmanual).REPAIR PROTECTIONAGREEMENTSCongratulations on making a smart pur-chase. Your new Craftsman product isdesigned and manufactured for years ofdependable operation. But like all products,it may require repair from time to time. That'swhen having a Repair Protection Agreementcan save you money and aggravation.Purchase a Repair Protection Agreementnow and protect yourself from unexpectedhassle and expense.Here's what's included in the Agreement:, Expert service by our 12,000 profesion-

al repair specialists., Unlimited service and no charge for

parts and labor on all covered repairs. Product replacement if your covered

product can't be fixed., Discount of 10% from regular price of

service and service-related parts notcovered by the agreement; also, 10% offregular price of preventive maintenancecheck.

Fast help by phone - phone supportfrom a Sears representative on productsrequiring in-home repair, plus conve-nient repair scheduling.

Once you purchase the Agreement, asimple phone call is all that it takes for youto schedule service. You can call anytimeday or night, or schedule a service ap-pointment online.Sears has over 12,000 professional repairspecialists, who have access to over 4.5million quality parts and accessories.That's the kind of professionalism you cancount on to help prolong the life of yournew purchase for years to come. Purchaseyour Repair Protection Agreement today!Some limitations and exclusions apply.For prices and additional informationcall 1=800-827-6655.

SEARS INSTALLATION SERVICEFor Sears professional installation of homeappliances, garage door openers, waterheaters, and other major home items, inthe U.S.A. call 1=800-4-MY=HOME

(1) Wheel (_

Mower Front Wheel

(1) 1-1/40.D. Washer

(1) Locknut 3/8-16

(5) Large RetainerSprings - 7/16

Mower

0(1) 3/40.D. Washers

(2) Small RetainerSprings - 5/16

(5) 1-3/16 O.D. Washers

Assembly

(1) Anti-Swar Bar

(2) Rear Lift LinkAssemblies

,=_===========_

(1) Oil Drain TubeFor Future Use

(2) Keys

lr,',lMower Install Slope Sheet

Sheeti 'i_ _:

7

Your new tractor has been assembled at the factory with the exception of those parts leftunassembled for shipping purposes.TOOLS REQUIRED FOR ASSEMBLYA socket wrench set will make assemblyeasier. Standard wrench sizes you needare listed below.(1) 3/4" wrench (1) Pliers(1) 9/16" wrench (1) Utility knife(1) Tire pressure gauge

When right or left hand is mentioned inthis manual, it means, from your point ofview, when you are in the operating posi-tion (seated behind the steering wheel).TO REMOVE TRACTOR FROMCARTONUNPACK CARTON1. Remove all accessible loose parts and

parts boxes from carton.2. Cut along dashed lines on all four pan-

els of carton. Remove end panels andlay side panels flat,

3. Remove mower and packing materials.4. Check for any additional loose parts or

cartons and remove.

CHECK BATTERY1. Lift hood to raised position.NOTE: If this battery is put into serviceafter month and year indicated on label(L) (label is located between terminals)charge battery for minimum of one hour at6-10 amps. (See "BATTERY" in Mainte-nance section of this manual for charginginstructions).

ADJUST SEAT1. Sit in seat,2. Lift up adjustment lever (A) and slide

seat until a comfortable position isreached which allows you to pressclutch/brake pedal all the way down.

3. Release lever to lock seat in position.

NOTE: You may now roll or drive yourtractor off the skid. Follow the appropriateinstruction below to remove the tractorfrom the skid.

,_WARNING: Before starting, read,understand and follow all instructions inthe Operation section of this manual. Besure tractor is in a well-ventilated area. Besure the area in front of tractor is clear ofother people and objects.TO ROLL TRACTOR OFF SKiD(See Operation section for locationand function of controls)1. Raise attachment lift lever to its highest

position.2. Release parking brake by depressing

clutch/brake pedal.3. Place gearshift lever in neutral (N)

position.4. Roll tractor forward off skid.

TO DRIVE TRACTOR OFF SKID(See Operation section for locationand function of controls)1. Be sure all the above steps have been

completed.2. Check engine oil level and fill fuel tank

with gasoline.3. Sit on seat in operating position,

depress clutch/brake pedal and set theparking brake.

4. Place gear shift lever in neutral (N)position.

5. Raise attachment lift lever to its highestposition.

6. Remove key from bag and start theengine (see "TO START ENGINE" inthe Operation section of this manual).After engine has started, move throttlecontrol to idle position.

7. Depress clutch/brake pedal into full"BRAKE" position and hold. Movegearshift lever to 1st gear.

8. Slowly release clutch/brake pedal andslowly drive tractor off skid.

9. Apply brake to stop tractor, set park-ing brake and place gearshift lever inneutral position.

10.Turn ignition key to "STOP" position.Continue with the instructions that follow.ASSEMBLE FRONT WHEEL TOMOWER1. Using shoulder bolt, washer and

Iocknut from parts bag, assemble frontwheel to mower as shown. Tightensecurely.

3. Remove plastic tie securing belt, bringbelt forward and check belt for properrouting in all mower pulley grooves.

/

NOTE: Be sure mower side suspensionarms (A) are pointing forward before slid-ing mower under tractor.4. Slide mower under tractor until it is

centered under tractor.5. FIRST INSTALL ANTI-SWAY BAR (S).

From right side of mower, insert ant-sway bar into hole in transmissionbracket (T).

INSTALL MOWER AND DRIVEBELTSee MOWER AND DRIVE BELT AS-SEMBLY Supplement Sheet for additionalguidance on this assembly.Be sure tractor is on level surface andengage parking brake.1. Lower attachment lift lever to it's lowest

position.CAUTION: Lift lever is spring loaded.

Have a tight grip on lift lever, lower itslowly and engage in lowest position.2. Turn steering wheel to the left as far as

it will go and position mower on rightside of tractor with deflector shield tothe right.

Pivot bar towards you and insertother end of bar into hole in rearmower bracket (D). Move mower asneeded to insert bar.Secure with washer and retainerspring as shown.

9

6. ATTACH MOWER SIDE SUSPENSIONARMS (A) TO CHASSIS - Position holein arm over pin (B) on outside of tractorchassis and secure with washer andretainer spring.

7. Repeat on opposite side of tractor.

10.Turn steering wheel to position wheelsstraight forward.

11 .ATTACH FRONT LINK (E) - Work fromleft side of tractor. Insert rod end of linkassembly through front hole in trac-tor front suspension bracket (F) andsecure with retainer spring (G) throughhole in link located behind the bracket.

12. Insert other end of link (E) into hole infront mower bracket (H) and securewith washer and retainer spring (J).

8. ATTACH REAR LIFT LINKS (C) - Insertrod end of link assembly into hole in trac-tor lift shaft suspension arm (L) and pivotlink down to mower. Lift rear corner ofmower and position slot in link assemblyover pin on rear mower bracket (D) andsecure with washer and retainer spring.

9. Repeat on opposite side of tractor.13. Disengage belt tension rod (K) from

locking bracket (L).14. Install belt onto engine clutch pulley (M).IMPORTANT: Check belt for proper rout-ing in all mower pulley grooves.

02937

10

15. Engage belt tension rod (K) on lockingbracket (L).

_, CAUTION: Belt tension rod is springloaded. Have a tight grip on rod andengage slowly.16. Raise attachment lift lever to highest

position.17. If necessary, adjust gauge wheels

before operating mower as shown inthe Operation section of this manual.

CHECK TiRE PRESSUREThe tires on your tractor were overinfiatedat the factory for shipping purposes. Cor-rect tire pressure is important for bestcutting performance.

Reduce tire pressure to PSI shown ontires.

CHECK DECK LEVELNESSFor best cutting results, mower hous-ing should be properly leveled. See "TOLEVEL MOWER" in the Service andAdjustments section of this manual.CHECK FOR PROPER POSiTiONOF ALL BELTSSee the figures that are shown for replac-ing motion and mower blade drive beltsin the Service and Adjustments sectionof this manual. Verify that the belts arerouted correctly.CHECK BRAKE SYSTEMAfter you learn how to operate your trac-tor, check to see that the brake is operat-ing properly. See "TO CHECK BRAKE"in the Service and Adjustments section ofthis manual.

_/ CHECKLISTBefore you operate your new tractor, wewish to assure that you receive the bestperformance and satisfaction from thisQuality Product.Please review the following checklist:,/All assembly instructions have been

completed." No remaining loose parts in carton." Battery is properly prepared and

charged." Seat is adjusted comfortably and tight-

ened securely.,/All tires are properly inflated. (For ship-

ping purposes, the tires were overin-flated at the factory).

,/Be sure mower is properly leveledside-to-side/front-to-rear for best cuttingresults. (Tires must be properly inflatedfor leveling).

,/Check mower and drive belts. Be surethey are routed properly around pulleysand inside all belt keepers.

" Check wiring. See that all connectionsare still secure and wires are properlyclamped.

While learning how to use your tractor, payextra attention to the following importantitems:" Engine oil is at proper level." Fuel tank is filled with fresh, clean, regu-

lar unleaded gasoline.,/Become familiar with all controls, their

location and function. Operate thembefore you start the engine.

,/Be sure brake system is in safe operat-ing condition.

" Be sure Operator Presence Systemand Reverse Operation System (ROS)are working properly (See the Opera-tion and Maintenance sections in thismanual).

11

These symbols may appear on your tractor or in literature supplied with the product.Learn and understand their meaning.

R N H L I'.,IREVERSE NEUTRAL HIGH LOW CHOKE FAST SLOW

ENGINE OFF REVERSE ENGINE ON ENGINE START PARKING BRAKE MOWER HEIGHTOPERATION

SYSTEM (ROS)

LIGHTS ONa

FUEL BATTERY

ATTACHMENT ATTACHMENTCLUTCH DISENGAGED CLUTCH ENGAGED

FREE WHEEL(Automatic Models only)

Failure to follow instructionscould result in serious injury ordeath. The safety alert symbolis used to identify safety inform-ation about hazards which canresult in death, serious injuryand/or property damage.

IGNITION SWITCH

MOWER LiFT

REVERSE FORWARD CRUISE CONTROL

DANGER, KEEP HANDSAND FEET AWAY

CLUTCH/BRAKEPEDAL

@@@KEEP AREA CLEAR SLOPE HAZARDS

(SEE SAFETY RULES SECTION)

DANGER indicates a hazard which, if not avoided,will result in death or serious injury.

WARNING indicates a hazard which, if not avoided,could result in death or serious injury.

CAUTION indicates a hazard which, if not avoided,might result in minor or moderate injury.

CAUTION when used without the alert symbol,indicates a situation that could result in damageto the tractor and/or engine.

HOT SURFACES indicates a hazard which,if not avoided, could result in death, serious injuryand/or property damage.

FIRE indicates a hazard which, if not avoided,could result in death, serious injury and/orproperty damage.

12

KNOW YOUR TRACTORREAD THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOURTRACTORCompare the illustrations with your tractor to familiarize yourself with the locations ofvarious controls and adjustments. Save this manual for future reference.

3117

Our tractors conform to the applicable safety standards of theAmerican National Standards Institute.

(A) ATTACHMENT LIFT LEVER - Usedto raise and lower the mower or other at-tachments mounted to your tractor.(B) CLUTCH/BRAKE PEDAL- Used fordeclutching and braking the tractor andstarting the engine.(C) PARKING BRAKE - Locks clutch/brake pedal into the brake position.(D) THROTTLE CONTROL - Used tocontrol engine speed.(E) ATTACHMENT CLUTCH SWITCH- Used to engage the mower blades, orother attachments mounted to your trac-tor.(F) IGNITION SWITCH - Used for startingand stopping the engine.

(G) REVERSE OPERATION SYSTEM(ROS) "ON" POSITION - Allows opera-tion of mower or other powered attachmentwhile in reverse.(H) LIGHT SWITCH - Turns the headlightson and off.(J) GEARSHIFT LEVER - Selects thespeed and direction of the tractor.(N) CHOKE CONTROL - Used whenstarting a cold engine.(P) SERVICE REMINDER / HOUR METER- Indicates when service is required for theengine and mower.(Q) 12-VOLT POWER PORT - Used for12-volt accessories.

13

The operation of any tractor can result in foreign objects thrown into theeyes, which can result in severe eye damage. Always wear safety glassesor eye shields while operating your tractor or performing any adjustmentsor repairs. We recommend standard safety glasses or a wide vision safetymask worn over spectacles.

HOW TO USE YOUR TRACTORTO SET PARKING BRAKEYour tractor is equipped with an operatorpresence sensing switch. When engineis running, any attempt by the operatorto leave the seat without first setting theparking brake will shut off the engine.1. Depress clutch/brake pedal (B) all the

way down and hold.2. Pull parking brake lever (C) up and

hold, release pressure from brakepedal (B), then release parking brakelever. Pedal should remain in brakeposition. Make sure parking brake willhold tractor secure.

STOPPING

MOWER BLADES - To stop mower blades, push attachment

clutch switch in to disengaged position(o).

GROUND DRIVE -To stop ground drive, depress clutch/brake pedal all the way down.Move gearshift lever (J) to neutral posi-tion.

ENGINE -Move throttle control (D) between halfand full speed (fast) position.

NOTE: Failure to move throttle controlbetween half and full speed (fast) posi-tion, before stopping, may cause engine to"backfire".

Turn ignition key (F) to "STOP" positionand remove key. Always remove keywhen leaving tractor to prevent unau-thorized use.Never use choke (N) to stop engine.

IMPORTANT." Leaving the ignition switchin any position other than "STOP" willcause the battery to discharge and godead.NOTE: Under certain conditions whentractor is standing idle with the enginerunning, hot engine exhaust gases maycause "browning" of grass. To eliminatethis possibility, always stop engine whenstopping tractor on grass areas._IbCAUTION: Always stop tractorcompletely, as described above, and setparking brake before leaving the operator'sposition.

(I) AttachmentClutch SwitchPull Out To "Engage"

(O) Push-In to"Disengaged"

14

TO USE THROTTLE CONTROL (D)Always operate engine at full speed (fast)., Operating engine at less than full speed

(fast) reduces engine's operating ef-ficiency.

, Full speed (fast) offers the best mowerperformance.

TO USE CHOKE CONTROL (N)Use choke control whenever you arestarting a cold engine. Do not use to starta warm engine. To engage choke control, pull knob out.

Slowly push knob in to disengage.

TO MOVE FORWARD AND BACKWARDThe direction and speed of movement iscontrolled by the gearshift lever (J).

1. Start tractor with clutch/brake pedaldepressed and gearshift lever in neu-tral (N) position.

2. Move gearshift lever to desired po-sition.

3. Slowly release clutch/brake pedal tostart movement.

IMPORTANT: Bring tractor to a completestop before shifting or changing gears.Failure to do so will shorten the useful lifeof your transaxle.TO ADJUST MOWER CUTTING HEIGHTThe position of the attachment lift lever(B) determines the cutting height.

, Put attachment lift lever in desired cut-ting height slot.

, Slide pointer tab (T) to desired cuttingheight as a reminder for next time youmow.

The cutting height range is approximately1 to 4". The heights are measured fromthe ground to the blade tip with the enginenot running. These heights are approxi-mate and may vary depending upon soilconditions, height of grass and types ofgrass being mowed. The average lawn should be cut to ap-

proximately 2-1/2 inches during the coolseason and to over 3 inches during hotmonths. For healthier and better lookinglawns, mow often and after moderategrowth.

For best cutting performance, grass over6 inches in height should be mowedtwice. Make the first cut relatively high;the second to desired height.

TO ADJUST GAUGE WHEELSGauge wheels are properly adjustedwhen they are slightly off the ground whenmower is at the desired cutting height inoperating position. Gauge wheels thenkeep the deck in proper position to helpprevent scalping in most terrain conditions.NOTE: Adjust gauge wheels with tractoron a flat level surface.1. Adjust mower to desired cutting height

(See "TO ADJUST MOWER CUTTINGHEIGHT" in this section of manual).

2. With mower in desired height of cutposition, gauge wheels should beassembled so they are slightly off theground. Install gauge wheel in appro-priate hole. Tighten securely.

3. Repeat for all, installing gauge wheel insame adjustment hole.

TO OPERATE MOWERYour tractor is equipped with an operatorpresence sensing switch. Any attemptby the operator to leave the seat with theengine running and the attachment clutchengaged will shut off the engine. You mustremain fully and centrally positioned in theseat to prevent the engine from hesitatingor cutting off when operating your equip-ment on rough, rolling terrain or hills.1. Select desired height of cut with at-

tachment lift lever.2. Start mower blades by engaging at-

tachment clutch control.TO STOP MOWER BLADES -disengage attachment clutch control._,CAUTION: Do not operate the mowerwithout either the entire grass catcher,on mowers so equipped, or the deflectorshield (S) in place.

REVERSE OPERATION SYSTEM (ROS)Your tractor is equipped with a ReverseOperation System (ROS). Any attempt bythe operator to travel in the reverse direc-tion with the attachment clutch engagedwill shut off the engine unless ignition keyis placed in the ROS "ON" position.,all'WARNING: Backing up with the at-tachment clutch engaged while mowingis strongly discouraged. Turning the ROS"ON", to allow reverse operation with theattachment clutch engaged, should onlybe done when the operator decides it isnecessary to reposition the machine withthe attachment engaged. Do not mow inreverse unless absolutely necessary.USING THE REVERSE OPERATIONSYSTEM -Only use if you are certain no children orother bystanders will enter the mowingarea.1. Depress clutch/brake pedal all the way

down and hold.2. With engine running, turn ignition key

counterclockwise to ROS "ON" posi-tion.

3. Look down and behind before backing.4. Move gear shift lever to reverse (R) po-

sition and slowly release clutch/brakepedal to start movement.

5. When use of the ROS is no longerneeded, turn the ignition key clockwiseto engine "ON" position.

ROS "ON" Position Engine "ON" Position(Normal Operating)

TO OPERATE ON HILLS_i, WARNING: Do not drive up or downhills with slopes greater than 15 and donot drive across any slope. Use the slopeguide at the back of this manual. Choose the slowest speed before starting

up or down hills., Avoid stopping or changing speed on

hills., If stopping is absolutely necessary, push

clutch/brake pedal quickly to brake positionand engage parking brake.

, Move gearshift lever to 1st gear. Be sureyou have allowed room for tractor to rollslightly as you restart movement.

To restart movement, slowly release park-ing brake and clutch/brake pedal.

, Make all turns slowly.

TO TRANSPORT Raise attachment lift lever to its highest

position., When pushing or towing your tractor,

be sure gearshift lever is in neutral (N)position.

Do not push or tow tractor at more thanfive (5) MPH.

NOTE: To protect hood from damagewhen transporting your tractor on a truckor a trailer, be sure hood is closed andsecured to tractor. Use an appropriatemeans of tying hood to tractor (rope, cord,etc.).TOWING CARTS AND OTHER ATTACH-MENTSTow only the attachments that are recom-mended by and comply with specificationsof the manufacturer of your tractor. Usecommon sense when towing. Too heavyof a load, while on a slope, is dangerous.Tires can lose traction with the ground andcause you to lose control of your tractor.

16

SERVICE REMINDER/HOUR METERService reminder shows the total numberof hours the engine has run and flashes toindicate that the engine or mower needsservicing. When service is required, theservice reminder will flash for two hours.To service engine and mower, see theMaintenance section of this manual.NOTE: Service reminder runs when theignition key is in any position but "STOP".For acurate reading, be sure key remainsin the "STOP" position when engine is notrunning.

BEFORE STARTING THE ENGINECHECK ENGINE OIL LEVELThe engine in your tractor has beenshipped, from the factory, already filledwith summer weight oil.1. Check engine oil with tractor on level

ground.2. Unthread and remove oil fill cap/

dipstick; wipe oil off. Reinsert thedipstick into the tube and rest oil fillcap on the tube. Do not thread the caponto the tube. Remove and read oillevel. If necessary, add oil until "rULE'mark on dipstick is reached. Do notoverfill.

For cold weather operation you shouldchange oil for easier starting (See theoil viscosity chart in the Maintenancesection of this manual).

To change engine oil, see the Mainte-nance section in this manual.

ADD GASOLINE, Fill fuel tank to bottom of filler neck. Do

not overfill. Use fresh, clean, regularunleaded gasoline with a minimum of87 octane. (Use of leaded gasoline willincrease carbon and lead oxide depositsand reduce valve life). Do not mix oilwith gasoline. Purchase fuel in quan-tities that can be used within 30 days toassure fuel freshness.

_CAUTION: Wipe off any spilled oil orfuel. Do not store, spill or use gasolinenear an open flame.IMPORTANT." When operating in temper-atures below32F(0C), use fresh, cleanwinter grade gasoline to help insure goodcold weather starting.

CAUTION: Alcohol blended fuels (calledgasohol or using ethanol or methanol) canattract moisture which leads to separa-tion and formation of acids during storage.Acidic gas can damage the fuel systemof an engine while in storage. To avoidengine problems, the fuel system shouldbe emptied before storage of 30 daysor longer. Drain the gas tank, start theengine and let it run until the fuel linesand carburetor are empty. Use fresh fuelnext season. See Storage Instructions foradditional information. Never use engineor carburetor cleaner products in the fueltank or permanent damage may occur.

TO START ENGINEWhen starting the engine for the first timeor if the engine has run out of fuel, it willtake extra cranking time to move fuel fromthe tank to the engine.1. Sit on seat in operating position,

depress clutch/brake pedal and setparking brake.


3. Move attachment clutch to disengagedposition.

4. Move throttle control to fast position5. Pull choke control out for a cold engine

start attempt. For a warm engine startattempt the choke control may not beneeded.

NOTE: Before starting, read the warm andcold starting procedures below.6. Insert key into ignition and turn key

clockwise to start position and releasekey as soon as engine starts. Donot run starter continuously for morethan fifteen seconds per minute. If theengine does not start after severalattempts, push choke control in, waita few minutes and try again. If enginestill does not start, pull the choke con-trol out and retry.

WARM WEATHER STARTING (50 F andabove)7. When engine starts, slowly push choke

control in until the engine begins torun smoothly. If the engine starts torun roughly, pull the choke control outslightly for a few seconds and thencontinue to push the control in slowly.

, The attachments and ground drive cannow be used. If the engine does notaccept the load, restart the engine andallow it to warm up for one minute usingthe choke as described above.

17

COLD WEATHER STARTING (50 F andbelow)7. When engine starts, slowly push

choke control in until the enginebegins to run smoothly. Continue topush the choke control in small stepsallowing the engine to accept smallchanges in speed and load, until thechoke control is fully in. If the enginestarts to run roughly, pull the chokecontrol out slightly for a few secondsand then continue to push the controlin slowly. This may require an enginewarm-up period from several secondsto several minutes, depending on thetemperature.

The attachments can be used duringthe engine warm-up period and mayrequire the choke control be pulled outslightly.

NOTE: If at a high altitude (above 3000feet) or in cold temperatures (below 32 F)the carburetor fuel mixture may need tobe adjusted for best engine performance.See "TO ADJUST CARBURETOR" in theService and Adjustments section of thismanual.

MOWING TiPS Tire chains cannot be used when the

mower housing is attached to tractor., Mower should be properly leveled for

best mowing performance. See "TOLEVEL MOWER HOUSING" in theService and Adjustments section of thismanual.

, The left hand side of mower should beused for trimming.

Drive so that clippings are dischargedonto the area that has already been cut.Have the cut area to the right of the trac-tor. This will result in a more even distri-bution of clippings and more uniformcutting.

When mowing large areas, start byturning to the right so that clippings willdischarge away from shrubs, fences,driveways, etc. After one or two rounds,mow in the opposite direction making lefthand turns until finished.

f

( ]1J

If grass is extremely tall, it should bemowed twice to reduce load and pos-sible fire hazard from dried clippings.Make first cut relatively high; the secondto the desired height.

Do not mow grass when it is wet. Wetgrass will plug mower and leave undesir-able clumps. Allow grass to dry beforemowing.

Always operate engine at full throttlewhen mowing to assure better mow-ing performance and proper dischargeof material. Regulate ground speed byselecting a low enough speed to give themower cutting performance as well asthe quality of cut desired.

, When operating attachments, select aground speed that will suit the terrainand give best performance of the at-tachment being used.

18

MAINTENANCE BEFORE EVERY EVERY EVERY EVERY EVERY BEFORESCHEDULE EACH 8 25 50 100 SEASON STORAGEUSE HOURS HOURS HOURS HOURS

Check Brake Operation _Check Tire Pressure _ Q##

TF_ Check Operator Presence & ROS Systems

A Check for Loose Fasteners

C ChecWReplace Mower BladesT Lubrication Chart0 Check Battery LevelR Clean Battery and Terminals

Check Transaxle CoolingCheck Mower LevelnessCheck V-Belts

Check Engine Oil LevelChange Engine Oil (with oil filter)Change Engine Oil (without oil filter

_ Clean Air Filter

G Clean Air ScreenI Inspect Muffler/Spark Arrester

N Replace Oil Filter (If equipped)E Clean Engine Cooling Fins

Replace Spark PlugReplace Air Filter Paper Cartridge

__ R__=placeFuel Filter

v' v'

.v' v'

v' v'v'

_1,2

v'=/

_1,2

v'

v'_,2

V' v"

v'

1 - Change more often when operating under a heavy load or 3 - Replace blades more often when mowing in sandy soil.in high ambient temperatures. 4 - Not required if equipped with maintenance-free battery.

2 - Service more often when operating in dirty or dusty conditions.

GENERAL RECOMMENDATIONSThe warranty on this tractor does notcover items that have been subjected tooperator abuse or negligence. To receivefull value from the warranty, operatormust maintain tractor as instructed in thismanual.Some adjustments will need to be madeperiodically to properly maintain yourtractor.At least once a season, check to see ifyou should make any of the adjustmentsdescribed in the Service and Adjustmentssection of this manual.* At least once a year you should replace

the spark plug, clean or replace air filter,and check blades and belts for wear.A new spark plug and clean air filterassure proper air-fuel mixture and helpyour engine run better and last longer.

BEFORE EACH USE1. Check engine oil level.2. Check brake operation.3. Check tire pressure.4. Check operator presence and

ROS systems for proper operation.5. Check for loose fasteners.

LUBRiCATiON CHART

(_ Sic ) SpindleZerk Zerk

(_ Front WheelFront Bearing zerkBearing zerk

EngineSteerin(Sector GearTeeth (T) Mandrel

zerks

(_ General Purpose Grease(_) Refer to Maintenance "ENGINE" Section

iMPORTANT: Do not oil or grease thepivot points which have special nylonbearings. Viscous lubricants will attractdust and dirt that will shorten the life of theself-lubricating bearings. If you feel theymust be lubricated, use only a dry, pow-dered graphite type lubricant sparingly.

19

TRACTORAlways observe safety rules when per-forming any maintenance.BRAKE OPERATIONIf tractor requires more than five (5) feet tostop at highest speed in highest gear on alevel, dry concrete or paved surface, thenbrake must be serviced. (See "TO CHECKBRAKE" in the Service and Adjustmentssection of this manual).TIRES Maintain proper air pressure in all tires

(See "PRODUCT SPECIFICATIONS"section of this manual).

Keep tires free of gasoline, oil, or insectcontrol chemicals which can harm rub-ber.

Avoid stumps, stones, deep ruts, sharpobjects and other hazards that maycause tire damage.

NOTE: To seal tire punctures and preventflat tires due to slow leaks, tire sealantmay be purchased from your local partsdealer. Tire sealant also prevents tire dryrot and corrosion.OPERATOR PRESENCE SYSTEM ANDREVERSE OPERATION SYSTEM (ROS)Be sure operator presence and reverseoperation systems are working properly.If your tractor does not function as de-scribed, repair the problem immediately. The engine should not start unless the

brake pedal is fully depressed, andthe attachment clutch control is in thedisengaged position.

CHECK OPERATOR PRESENCESYSTEM When the engine is running, any at-

tempt by the operator to leave the seatwithout first setting the parking brakeshould shut off the engine.

When the engine is running and theattachment clutch is engaged, any at-tempt by the operator to leave the seatshould shut off the engine.

, The attachment clutch should never op-erate unless the operator is in the seat.

ROS "ON" Position Engine "ON" Position(Normal Operating)

CHECK REVERSE OPERATION (ROS)SYSTEM, When the engine is running with the

ignition switch in the engine "ON" posi-tion and the attachment clutch engaged,any attempt by the operator to shift intoreverse should shut off the engine.

When the engine is running with theignition switch in the ROS "ON" positionand the attachment clutch engaged,any attempt by the operator to shift intoreverse should NOT shut off the engine.

BLADE CAREFor best results mower blades must besharp. Replace worn, bent or damagedblades._, CAUTION: Use only a replacementblade approved by the manufacturer ofyour tractor. Using a blade not approved bythe manufacturer of your tractor is hazard-ous, could damage your tractor and voidyour warranty.

BLADE REMOVAL1. Raise mower to highest position to al-

low access to blades.NOTE: Protect your hands with glovesand/or wrap blade with heavy cloth.2. Remove blade bolt by turning counter-

clockwise.3. Install new blade with stamped "THIS

SIDE UP" facing deck and mandrel as-sembly.

IMPORTANT: To ensure proper assembly,center hole in blade must align with star onmandrel assembly.4, Install and tighten blade bolt securely

(45-55 Ft, Lbs, torque),IMPORTANT: Special blade bolt is heattreated,

Blade

Blade Bolt(Sl

Center Hole

MandrelAssembly

BATTERY

Your tractor has a battery charging systemwhich is sufficient for normal use. How-ever, periodic charging of the battery withan automotive charger will extend its life., Keep battery and terminals clean. Keep battery bolts tight., Keep small vent holes open., Recharge at 6-10 amperes for 1 hour.

2O

NOTE: The original equipment battery onyour tractor is maintenance free. Do notattempt to open or remove caps or covers.Adding or checking level of electrolyte isnot necessary.TO CLEAN BATTERY AND TERMINALSCorrosion and dirt on the battery andterminals can cause the battery to "leak"power.1. Remove terminal guard.2. Disconnect BLACK battery cable first

then RED battery cable and removebattery from tractor.

3. Rinse the battery with plain water anddry.

4. Clean terminals and battery cable endswith wire brush until bright.

5. Coat terminals with grease or petro-leum jelly.

6. Reinstall battery (See "REPLACINGBATTERY" in the SERVICE AND AD-JUSTMENTS section of this manual).

TRANSAXLE COOLINGKeep transaxle free from build-up of dirtand chaff which can restrict cooling.V-BELTSCheck V-belts for deterioration and wearafter 100 hours of operation and replaceif necessary. The belts are not adjustable.Replace belts if they begin to slip fromwear.

ENGINELUBRICATIONOnly use high quality detergent oil ratedwith API service classification SG-SL.Select the oil's SAE viscosity gradeaccording to your expected operatingtemperature.

SAE VISCOSITY GRADES

F -20 0 30 32 40 60 80 100

c -io -2; -1; ; 1'o _o _o 40TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE

oi_ visccharNe

Change the oil after every 50 hours of op-eration or at least once a year if the tractoris not used for 50 hours in one year.Check the crankcase oil level before start-ing the engine and after each eight (8)hours of operation.

TO CHANGE ENGINE OILDetermine temperature range expectedbefore oil change. All oil must meet APIservice classification SG-SL.

Be sure tractor is on level surface.Oil will drain more freely when warm.Catch oil in a suitable container.

1. Remove oil fill cap/dipstick. Be carefulnot to allow dirt to enter the enginewhen changing oil.

2. Remove yellow cap from end of drainvalve and install the drain tube onto thefitting.

Oil Drain Valve

ClosedandLockedPosition

Yellow Caic

Drain Tube

3. Unlock drain valve by pushing inwardslightly and turning counterclockwise.

4. To open, pull out on the drain valve.5. After oil has drained completely, close

and lock the drain valve by pushinginward and turning clockwise until thepin is in the locked position as shown.

6. Remove the drain tube and replace thecap onto the end of the drain valve.

7. Refill engine with oil through oil fill dip-stick tube. Pour slowly. Do not overfill.For approximate capacity see "PROD-UCT SPECIFICATIONS" section of thismanual.

8. Use gauge on oil fill cap/dipstick forchecking level. Insert dipstick intothe tube and rest the oil fill cap on thetube. Do not thread the cap onto thetube when taking reading. Keep oilat "FULl" line on dipstick. Tighten caponto the tube securely when finished.

ENGINE OiL FILTERReplace the engine oil filter every seasonor every other oil change if the tractor isused more than 100 hours in one year.

21

AIR FILTERYour engine will not run properly usinga dirty air filter. Service paper cartridgeevery two months or every 25 hours ofoperation, whichever occurs first.Service paper cartridge more often underdusty conditions.Replace the paper cartridge annually, orafter every 100 hours of operation.TO SERVICE CARTRIDGE

Replace a dirty, bent, or damaged car-tridge. Handle new cartridge carefully;do not use if the rubber seal is dam-aged.

NOTE: Do not wash the paper cartridgeor use pressurized air, as this will damagethe cartridge.1. Open door (A) on the blower housing

to access the air cleaner element (B).2. Unhook the latch (C) and remove the

element.3. Gently tap the paper element to dis-

lodge dirt.4. Clean all air cleaner components of

any accumulated dirt or foreign mate-rial. Prevent any dirt from entering thethroat of carburetor.

5. Install cleaned or new element on thebase and secure with latch.

6. Close and latch the door.

CLEAN AIR SCREENAir screen must be kept free of dirt andchaff to prevent engine damage fromoverheating. Clean with a wire brush orcompressed air to remove dirt and stub-born dried gum fibers.

CLEAN AIR INTAKE/COOLING AREASTo insure proper cooling, make sure thegrass screen, cooling fins, and other exter-nal surfaces of the engine are kept clean atall times.Every 100 hours of operation (more oftenunder extremely dusty, dirty conditions),remove the blower housing and othercooling shrouds. Clean the cooling fins andexternal surfaces as necessary. Make surethe cooling shrouds are reinstalled.NOTE: Operating the engine with ablocked grass screen, dirty or pluggedcooling fins, and/or cooling shrouds re-moved will cause engine damage due tooverheating.MUFFLERInspect and replace corroded muffler andspark arrester (if equipped) as it could cre-ate a fire hazard and/or damage.SPARK PLUG(S)Replace spark plug(s) at the beginning ofeach mowing season or after every 100hours of operation, whichever occurs first.Spark plug type and gap setting are shownin "PRODUCT SPECIFICATIONS" sectionof this manual.

IN-LINE FUEL FILTERThe fuel filter should be replaced onceeach season. If fuel filter becomesclogged, obstructing fuel flow to carburetor,replacement is required.1. With engine cool, remove filter and plug

fuel line sections.2. Place new fuel filter in position in fuel

line with arrow pointing towards carbu-retor.

3. Be sure there are no fuel line leaks andclamps are properly positioned.

4. Immediately wipe up any spilled gaso-line.

Clamp

Fuel Filter

22

CLEANING Clean engine, battery, seat, finish, etc.

of all foreign matter., Keep finished surfaces and wheels free

of all gasoline, oil, etc., Protect painted surfaces with auto-

motive type wax.

We do not recommend using a gardenhose or pressure washer to clean yourtractor unless the engine and transmis-sion are covered to keep water out. Waterin engine or transmission will shorten theuseful life of your tractor. Use compressedair or a leaf blower to remove grass,leaves and trash from tractor and mower.

WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SER=VICE OR ADJUSTMENTS:1. Depress clutch/brake pedal fully and set parking brake.2. Place gearshift lever in neutral (N) position.3. Place attachment clutch in "DISENGAGED" position.4. Turn ignition key to "STOP" and remove key.5. Make sure the blades and all moving parts have completely stopped.6. Disconnect spark plug wire from spark plug and place wire where it cannot

come in contact with plug.

TRACTORTO REMOVE MOWER1. Place attachment clutch in "DISEN-

GAGED" position.2. Lower attachment lift lever to its lowest

position.3. Disengage belt tension rod (K) from

lock bracket (L)._lb CAUTION: Belt tension rod is springloaded. Have a tight grip on rod and re-lease slowly.4. Remove mower belt from electric

clutch pulley (M).5. Disconnect front link (E) from mower

- remove retainer spring and washer.

6. Go to either side of mower and discon-nect mower suspension arm (A) fromchassis and rear lift link (C) from rearmower bracket (D) - remove retainersprings and washers.

7. Go to other side of mower and discon-nect the suspension arm and rear liftlink.

,_ CAUTION: After rear lift links are dis-connected, the attachment lift lever will bespring loaded. Have a tight grip on lift leverwhen changing position of the lever.

02937

23

8. From right side of mower, disconnectanti-sway bar (S) from right rear mowerbracket (D) - remove retainer springand washer and pull mower towardyou until the bar falls from the hole inbracket.

9. Turn tractor steering wheel to the leftas far as it will go.

10. Slide mower out from under right sideof tractor.

TO INSTALL MOWERFollow procedure described in "INSTALLMOWER AND DRIVE BELT" in the As-sembly section of this manual.

TO LEVEL MOWERMake sure tires are properly inflated tothe PSI shown on tires. If tires are overor under inflated, it may affect the appear-ance of your lawn and lead you to thinkthe mower is not adjusted properly.VISUAL SIDE-TO-SIDE ADJUSTMENT1. With all tires properly inflated and if

your lawn appears unevenly cut, de-termine which side of mower is cuttinglower.

NOTE: As desired, you can raise the lowside of mower or lower the high side.2. Go to side of mower you wish to adjust.3. With a 3/4" or adjustable wrench, turn

lift link adjustment nut (A) to the leftto lower the mower, or, to the right toraise the mower.

, Test your adjustment by mowing someuncut grass and visually checking theappearance. Readjust, if necessary,until you are satisfied with the results.

PRECISION SIDE-TO-SIDEADJUSTMENT1. With all tires properly inflated, park

tractor on level ground or driveway.CAUTION: Blades are sharp. Protect

your hands with gloves and/or wrap bladewith heavy cloth.2. Raise mower to its highest position.3. At both sides of mower, position blade

at side and measure the distance(A) from bottom edge of blade to theground. The distance should be thesame on both sides.

4. If adjustment is necessary, see steps 2and 3 in Visual Adjustment instructionsabove.

5. Recheck measurements, adjust if nec-essary until both sides are equal.

FRONT-TO-BACK ADJUSTMENTIMPORTANT: Deck must be level side-to-side.To obtain the best cutting results, themower blades should be adjusted so thefront tip is 1/8" to 1/2" lower than the reartip when the mower is in its highest posi-tion.,_ CAUTION: Blades are sharp. Protectyour hands with gloves and/or wrap bladewith heavy cloth. Raise mower to highest position. Position any blade so the tip is pointing

straight forward. Measure distance (B)to the ground at front and rear tip of theblade.

Turn nut rightto raise mower

Turn nut leftto lower mower

02948

NOTE: Each full turn of adjustment nut willchange mower height about 3/16". If front tip of blade is not 1/8" to 1/2"lower than the rear tip, go to the front of

tractor.

24

With an 11/16" or adjustable wrench,loosen jam nut A several turns to clearadjustment nut B.With a 3/4" or adjustable wrench, turnfront link adjustment nut (B) clockwise(tighten) to raise the front of mower, or,counterclockwise (loosen) to lower thefront mower.

Tighten adjust nutB to raise mower

Loosen adjust nutB to lower mower

Loosen jam nut A firstNOTE: Each full turn of the adjustmentnut will change mower height about 1/8"., Recheck measurements, adjust if nec-

essary until front tip of blade is 1/8" to1/2" lower than the rear tip.

, Hold adjustment nut in position withwrench and tighten jam nut securelyagainst adjustment nut.

TO REPLACE MOWER DRIVE BELT

MOWER DRIVE BELT REMOVAL1. Park tractor on a level surface. Engage

parking brake.2. Lower attachment lift lever to its lowest

position.3. Disengage belt tension rod (K) from,_ock bracket (L).

CAUTION: Belt tension rod is springloaded. Have a firm grip on rod and re-lease slowly.4. Remove screws (P) from R.H. and L.H.

mandrel covers and remove covers(Q).

5. Remove any dirt or grass clippingswhich may have accumulated aroundmandrels and entire upper deck sur-face.

6. Remove belt from electric clutch pulley(M), both mandrel pulleys (R) and allidler pulleys (S).

MOWER DRIVE BELT INSTALLATION1. Install belt around both mandrel pul-

leys (R) and around idler pulleys (S) asshown.

2. Install belt onto electric clutch pulley(M).

IMPORTANT: Check belt for proper rout-ing in all mower pulley grooves.3. Reassemble R.H. and L.H. mandrel

covers (Q). Securely tighten all screws.4. Engage belt tension rod (K) on locking

bracket (L).CAUTION: Belt tension rod is spring

loaded. Have a tight grip on rod and en-gage slowly.5. Raise attachment lift lever to highest

position.

25

TO ADJUST ATTACHMENT CLUTCHThe electric clutch should provide yearsof service. The clutch has a built-in brakethat stops the pulley within 5 seconds.Eventually, the internal brake will wearwhich may cause the mower blades tonot engage, or, to not stop as required.Adjustments should be made by a Searsor other qualified service center.1. Make sure attachment clutch and igni-

tion switches are in "OFF" position.2. Adjust the three nylon Iocknuts until

space between clutch plate and rotormeasures .012" at all three slot loca-tions cut in the side of brake plate.

NOTE: After installing a new electricclutch, run tractor at full throttle andengage and disengage electric clutch 10cycles to wear in clutch plate.

Rotor

BELT INSTALLATION -1. Install new belt from tractor rear to

front, over the steering plate (H) andabove clutch brake pedal shaft (J).

2. Pull belt toward front of tractor and rollbelt around electric clutch and ontoengine pulley (G).

3. Pull belt toward rear of tractor. Care-fully work belt down around transaxleinput pulley (F). Be sure belt is insidethe belt keeper.

4. Install belt through stationary idler (C)and clutching idler (D).

5. Reinstall anti-rotation link (B) on rightside of tractor. Tighten securely.

6. Reconnect clutch harness (A).7. Make sure belt is in all pulley grooves

and inside all belt guides and keepers.8. Install mower (See "TO INSTALL

MOWER" in this section of manual).

TO REPLACE MOTION DRIVE BELTPark the tractor on level surface. Engageparking brake. For assistance, there isa belt installation guide decal on bottomside of left footrest.

BELT REMOVAL -1. Remove mower (See "TO REMOVE

MOWER" in this section of manual).NOTE: Observe entire motion drive beltand position of all belt guides and keepers.2. Disconnect clutch wire harness (A).3. Remove anti-rotation link (B) on right

side of tractor.4. Remove belt from stationary idler (C)

and clutching idler (D).5. Pull belt slack toward rear of tractor.

Remove belt upwards from transaxleinput pulley (F).

6. Remove belt downward from enginepulley and around electric clutch (G).

7. Slide belt toward rear of tractor, off thesteering plate (H) and removefrom tractor.

TO CHECK BRAKEIf tractor requires more than five (5) feet tostop at highest speed in highest gear on alevel, dry concrete or paved surface, thenbrake must be serviced.You may also check brake by:1. Park tractor on a level, dry concrete or

paved surface, depress clutch/brakepedal all the way down and engageparking brake.


The rear wheels must lock and skidwhen you try to manually push the tractorforward. If the rear wheels rotate, then thebrake needs to be serviced. Contact aSears or other qualified service center.

26

FRONT WHEEL TOE-IN/CAMBERYour new tractor front wheel toe-in andcamber is set at the factory and is normal.The front wheel toe-in and camber arenot adjustable. If damage has occurred toaffect the factory set front wheel toe-in orcamber, contact a Sears or other qualifiedservice center.

TO REMOVE WHEEL FOR REPAIRS1. Block up axle securely.2. Remove axle cover, retaining ring and

washers to allow wheel removal (rearwheels have a square key - Do notlose).

3. Repair tire and reassemble.NOTE: On rear wheels only: aligngrooves in rear wheel hub and axle. In-sert square key.4. Replace washers and snap retaining

ring securely in axle groove.5. Replace axle cover.NOTE: To seal tire punctures and preventflat tires due to slow leaks, purchase anduse tire sealant from Sears. Tire sealantalso prevents tire dry rot and corrosion.

Washers

RetainingRing

Axle CoverI

_Square Key (RearWheel Only)

TO START ENGINE WITH A WEAK BAT-TERY_L, WARNING: Lead-acid batteriesgenerate explosive gases. Keep sparks,flame and smoking materials away frombatteries. Always wear eye protectionwhen around batteries.If your battery is too weak to start the en-gine, it should be recharged. (See "BAT-TERY" in the MAINTENANCE section ofthis manual).If "jumper cables" are used for emergencystarting, follow this procedure:IMPORTANT: Your tractor is equippedwith a 12 volt system. The other vehiclemust also be a 12 volt system. Do not useyour tractor battery to start other vehicles.

TO ATTACH JUMPER CABLES -1. Connect one end of the RED cable

to the POSITIVE (+) terminal of eachbattery(A-B), taking care not to shortagainst tractor chassis.

2. Connect one end of the BLACK cableto the NEGATIVE (-) terminal (C) offully charged battery.

3. Connect the other end of the BLACKcable (D) to good chassis ground,away from fuel tank and battery.

TO REMOVE CABLES, REVERSEORDER -1. BLACK cable first from chassis and

then from the fully charged battery.2. RED cable last from both batteries.

Weak or Dead Fully ChargedBattery Battery

REPLACING BATTERY_,WARNING: Do not short batteryterminals by allowing a wrench or anyother object to contact both terminals atthe same time. Before connecting battery,remove metal bracelets, wristwatch bands,rings, etc.Positive terminal must be connected first toprevent sparking from accidental ground-ing.1. Lift hood to raised position.2. Disconnect BLACK battery cable (A)

then RED battery cable and carefullyremove battery from tractor.

3. Install new battery with terminals insame position as old battery.

4. First connect RED battery cable (B) topositive (+) battery terminal with hexbolt and keps nut as shown. Tightensecurely. Slide terminal cover (C) overterminal.

5. Connect BLACK grounding cable tonegative (-) battery terminal with re-maining hex bolt and keps nut. Tightensecurely

6. Close hood.

27

(_ Negative(Black)Cable

Hood

Headlight WireConnector

Positive(Red)Cable

TO REPLACE HEADLIGHT BULB1. Raise hood.2. Remove bulb holder from the hole in

the backside of the grill.3. Replace bulb in holder and install bulb

holder securely back into the hole inthe backside of the grill.

4. Close hood.INTERLOCKS AND RELAYSLoose or damaged wiring may causeyour tractor to run poorly, stop running, orprevent it from starting., Check wiring. See electrical wiring

diagram in the Repair Parts section.TO REPLACE FUSEReplace with 30 amp automotive-typeplug-in fuse. The fuse holder is locatedbehind the dash.

TO REMOVE HOOD AND GRILL AS=SEMBLY1. Raise hood.2. Unsnap headlight wire connector.3. Stand in front of tractor. Grasp hood at

sides, tilt toward engine and lift off oftractor.

4. When replacing hood, be sure to re-connect the headlight wire connector.

ENGINEMaintenance, repair, or replacement ofthe emission control devices and systems,which are being done at the customers ex-pense, may be performed by any non-roadengine repair establishment or individual.Warranty repairs must be performed by anauthorized engine manufacturer's serviceoutlet.CARBURETORIf your engine does not operate properlydue to suspected carburetor problems,take your tractor to a Sears or otherqualified service center for repair and/oradjustment.High speed stop is factory adjusted. Donot adjust - damage may result.IMPORTANT: Never tamper with theengine governor, which is factory setfor proper engine speed. Overspeed-ing the engine above the factory highspeed setting can be dangerous. If youthink the engine-governed high speedneeds adjusting, contact a Sears or otherqualified service center,, which has properequipment and experience to make anynecessary adjustments.

28

Immediately prepare your tractor for stor-age at the end of the season or if the trac-_9_ will not be used for 30 days or more.

WARNING: Never store the tractorwith gasoline in the tank inside a buildingwhere fumes may reach an open flameor spark. Allow the engine to cool beforestoring in any enclosure.TRACTORRemove mower from tractor for winterstorage. When mower is to be stored for aperiod of time, clean it thoroughly, removeall dirt, grease, leaves, etc. Store in aclean, dry area.1. Clean entire tractor (See "CLEANING"

in the Maintenance section of thismanual).

2. Inspect and replace belts, if necessary(See belt replacement instructions inthe Service and Adjustments section ofthis manual).

3. Lubricate as shown in the Maintenancesection of this manual.

4. Be sure that all nuts, bolts and screwsare securely fastened. Inspect movingparts for damage, breakage and wear.Replace if necessary.

5. Touch up all rusted or chipped paintsurfaces; sand lightly before painting.

BATTERYFully charge the battery for storage.After a period of time in storage, batterymay require recharging.To help prevent corrosion and powerleakage during long periods of storage,battery cables should be disconnectedand battery cleaned thoroughly (see "TOCLEAN BATTERY AND TERMINALS" inthe Maintenance section of this manual).After cleaning, leave cables discon-nected and place cables where theycannot come in contact with batteryterminals.If battery is removed from tractor forstorage, do not store battery directly onconcrete or damp surfaces.

ENGINEFUEL SYSTEMIMPORTANT: It is important to preventgum deposits from forming in essentialfuel system parts such as carburetor, fuelhose, or tank during storage. Also, alcohol

blended fuels (called gasohol or usingethanol or methanol) can attract moisturewhich leads to separation and formation ofacids during storage. Acidic gas can dam-age the fuel system of an engine while instorage.

Empty the fuel tank by starting the en-gine and letting it run until the fuel linesand carburetor are empty.Never use engine or carburetor cleanerproducts in the fuel tank or permanentdamage may occur.Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptablealternative in minimizing the formation offuel gum deposits during storage. Addstabilizer to gasoline in fuel tank or stor-age container. Always follow the mix ratiofound on stabilizer container. Run engineat least 10 minutes after adding stabilizerto allow the stabilizer to reach the carbure-tor. Do not empty the gas tank and carbu-retor if using fuel stabilizer.ENGINE OILDrain oil (with engine warm) and replacewith clean engine oil. (See "ENGINE" inthe Maintenance section of this manual).CYLINDER(S)1. Remove spark plug(s).2. Pour one ounce of oil through spark

plug hole(s) into cylinder(s).3. Turn ignition key to start position for a

few seconds to distribute oil.4. Replace with new spark plug(s).OTHER* Do not store gasoline from one season

to another., Replace your gasoline can if your can

starts to rust. Rust and/or dirt in yourgasoline will cause problems.

* If possible, store your tractor indoorsand cover it to give protection from dustand dirt.

* Cover your tractor with a suitable pro-tective cover that does not retain mois-ture. Do not use plastic. Plastic cannotbreathe which allows condensation toform and will cause your tractor to rust.

IMPORTANT: Never cover tractor whileengine and exhaust areas are still warm.

29

TROUBLESHOOTING CHART:See appropriate section in manual unless directed to Sears service center

PROBLEM

Will not start

Hard to start

Engine will notturn over'

CAUSE

1 Out of fuel.

2 Engine not "CHOKED" properly.

3 Engine flooded.

4 Bad spark plug.

5 Dirty air filter.

6 Dirty fuel filter.

7 Water in fuel.

8 Loose or damaged wiring.

9 Carburetor out of adjustment.

10 Engine valves out of adjustment.

1 Dirty air filter.

2 Bad spark plug.

3 Weak or dead battery.


5 Stale or dirty fuel.


7 Carburetor out of adjustment.


1 Brake pedal not depressed.

2 Attachment clutch is engaged.


4 Blown fuse.

5 Corroded battery terminals.


CORRECTION

1 Fill fuel tank.

2 See "TO START ENGINE" inOperation section.

3 Wait several minutes beforeattempting to start.

4 Replace spark plug.

5 Clean/replace air filter.

6 Replace fuel filter.

7 Empty fuel tank and carburetor,refill tank with fresh gasoline andreplace fuel filter.

8 Check all wiring.

9 See "To Adjust Carburetor" inService and Adjustments section.

10 Contact a Sears or other qualifiedservice center.


2 Replace spark plug.

3 Recharge or replace battery.


5 Empty fuel tank and refill tank withfresh, clean gasoline.

6 Check all wiring.



1 Depress brake pedal.

2 Disengage attachment clutch.


4 Replace fuse.

5 Clean battery terminals.

6 Check all wiring.

7 Faulty ignition switch.

8 Faulty solenoid or starter.

9 Faulty operator presenceswitch(es).

7 Check/replace ignition switch.

8 Check/replace solenoid or starter.


30


CAUSE


2 Corroded battery terminals.


4 Faulty solenoid or starter.

1 Cutting too much grass/too fast.

2 Throttle in "CHOKE" position.

3 Build-up of grass, leaves andtrash under mower.

4 Dirty air filter.

5 Low oil level/dirty oil.

6 Faulty spark plug.


8 Stale or dirty fuel.

PROBLEM

Engine clicks butwill not start

Loss of power

Excessive vibration

Engine continues tcrun when operatorleaves seat withattachment clutchengaged

9 Water in fuel.

10 Spark plug wire loose.

11

12

13

14

Dirty engine air screen/fins.

Dirty/clogged muffler.

Loose or damaged wiring.

Carburetor out of adjustment.


1 Worn, bent or loose blade.

2 Bent blade mandrel.

3 Loose/damaged part(s).

1 Faulty operator-safety presencecontrol system.

CORRECTION


2 Clean battery terminals.

3 Check all wiring.

4 Check/replace solenoid or starter.

1 Raise cutting height/reducespeed.

2 Adjust throttle control.3 Clean underside of mower

housing.


5 Check oil level/change oil.

6 Clean and regap or change sparkplug.


8 Empty fuel tank and refill tank witPfresh, clean gasoline.

9 Empty fuel tank and carburetor,refill tank with fresh gasoline andreplace fuel filter.

10 Connect and tighten spark plugwire.

11 Clean engine air screen/fins.

12 Clean/replace muffler.

13 Check all wiring.



1 Replace blade. Tighten blade bolt.2 Contact a Sears or other

qualified service center.

3 Tighten loose part(s).Replace damaged parts.

1 Check wiring, switches andconnections. If not corrected,contact a Sears or other

31


PROBLEM

Poor cut = unevencutting

Mower blades willnot rotate

Poor grassdischarge

CAUSE

1 Worn, bent or loose blade.

2 Mower deck not level.

3 Buildup of grass, leaves, andtrash under mower.

4 Bent blade mandrel.

5 Clogged mower deck vent frombuild-up of grass, leaves, andtrash around mandrels.

1 Obstruction in clutch mechanism.

2 Worn/damaged mower drive belt

3 Frozen idler pulley.

4 Frozen blade mandrel.

1 Engine speed too slow.

CORRECTION

1 Replace blade. Tighten blade bolt.2 Level mower deck.

3 Clean underside of mowerhousing.

4 Contact a Sears or otherqualified service center.

5 Clean around mandrels toopen vent holes.

1 Remove obstruction.

2 Replace mower drive belt.

3 Replace idler pulley.

4 Contact a Sears or otherqualified service center.

1 Place throttle control in "FAST"position.

2 Travel speed too fast.

3 Wet grass.

4 Mower deck not level.

2 Shift to slower speed.

3 Allow grass to dry before mowing.4 Level mower deck.

Headlight(s) notworking(if so equipped)

5 Low/uneven tire air pressure.6 Worn, bent or loose blade.

7 Buildup of grass, leaves andtrash under mower.

8 Mower drive belt worn.

9 Blades improperly installed.

10 Improper blades used.

11 Clogged mower deck vent holesfrom buildup of grass, leaves, andtrash around mandrels.

1 Light switch is "OFF".

2 Bulb(s) or lamp(s) burned out.3 Faulty light switch.

4 Loose or damaged wiring.5 Blown fuse.

5 Check tires for proper PSI.

6 Replace/sharpen blade. Tightenblade bolt.

7 Clean underside of mowerhousing.

8 Replace mower drive belt.

9 Reinstall blades sharp edge down.

10 Replace with blades listed inthis manual.

11 Clean around mandrels toopen vent holes.

1 Turn light switch"ON".

2 Replace bulb(s) or lamp(s).3 Check/replace light switch.

4 Check wiring and connections.

5 Replace fuse.

32


PROBLEM

Battery will notcharge

Loss of drive

Engine "backfires"when turningengine "OFF"

Engine dies whentractor is shiftedinto reverse

CAUSE

1 Bad battery cell(s).2 Poor cable connections.

3 Faulty regulator (if so equipped).4 Faulty alternator.

1 Freewheel control in "disengaged"position.

2 Motion drive belt worn, damaged,or broken.

3 Air trapped in transmission

during shipment or servicing.

1 Engine throttle control not selbetween half and full speed (fast)position before stopping engine.

1 Reverse operation system (ROS)is not "ON" while mower or otherattachment is engaged.

CORRECTION

1 Replace battery.

2 Check/clean all connections.

3 Replace regulator.

4 Replace alternator.

1 Place freewheel control in"engaged" position.

2 Replace motion drive belt.

3 Purge transmission.

Move throttle control betweenhalf and full speed (fast) positionbefore stopping engine.

Turn ignition key to ROS "ON"position. See Operation section.

33

SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION

co

ONLY RIDE UP AND DOWN HILL,NOT ACROSS HILL

15 DEGREES MAX.

_b ARNING: To avoid serious injury, operate your tractor up anddown the face of slopes, never across the face. Do not mowslopes greater than 15 degrees. Make turns gradually to preventtipping or loss of control. Exercise extreme caution whenchanging direction on slopes.

1. Fold this page along dotted line indicated above.2. Hold page before you so that its left edge is vertically parallel to a tree

trunk or other upright structure.3. Sight across the fold in the direction of hill slope you want to measure.4. Compare the angle of the fold with the slope of the hill.

Garanfia ....................................................... 35 Programa de Mantenimiento ....................... 52Reglas de Seguridad ................................... 36 Servicio y Ajustes ........................................ 56Especificaciones del Producto ..................... 39 Almacenamiento .......................................... 62Montaje/Pre Operaci6n ................................ 41 Identificaci6n de Problemas ........................ 63Operaci6n .................................................... 45 Servicio Sears ................................ ContratapaMantenimiento ............................................. 52

GARANTiA LIMITADA PARA EL TRACTOR Y LA BATERiA CRAFTSMAN

2 AltOS PARA EL TRACTORSiempre que su uso y mantenimiento se realicen de acuerdo alas instrucciones del Manual delOperador, si este tractor Ilega a fallar debido a un defecto de materiales o de fabricaci6n dentrode un plazo de dos (2) aflos a partir de la fecha de compra, Ilame al 1-800-4-MY-HOME, o biengestione una reparaci6n sin cargo.Durante los primeros 30 dfas de dicho plazo, no se le cobrar& nada por reparar el producto en sudomicilio. Para su conveniencia, podr& seguir contando con la posibilidad de obtener el service dela garantia a domicilio una vez transcurridos los primeros 30 dfas, pero en ese caso deber& pagarun vi&tico. Usted podr& evitarse el costo del vi&tico si Ileva el producto a un centro de serviciosautorizado de Craftsman. Para saber cu&l le queda m&s cerca, Ilame al 1-800-4-MY-HOME.La cobertura de la garantia del tractor no incluye: Aquellos elementos fungibles que se desgasten por el uso normal, incluidos, de manera no

taxativa, las cuchillas, bujias, filtros de aire, correas y filtros de aceite., Los servicios de mantenimiento est&ndar, cambios de aceite o ajustes de motor., Los cambios o reparaciones de neum&ticos pinchados por objetos extraflos, tales como clavos,

espinas, tocones o trozos de vidrio., Las reparaciones que sea preciso hacer debido a malas tecnicas de manejo por parte del opera-

dor, entre las que se incluyen, de manera no taxativa, los daflos causados por arrastrar objetosyendo m&s all& de la capacidad del tractor, el choque con objetos que tuerzan el marco o el ejedel cigL]eflal, o la aceleraci6n excesiva del motor.

Las reparaciones que sea preciso hacer debido a la negligencia del operador, entre las quese incluyen, de manera no taxativa, los daflos electricos y mec&nicos por guardar la unidadde manera incorrecta, la no utilizaci6n del grado y la calidad apropiados de aceite para motor,el no mantener el piso libre de restos y escombros que puedan entrar en combusti6n, o el nomantener el equipo de acuerdo alas instrucciones del manual del operador.

Las limpiezas o reparaciones del motor (sistema de combustible) que sea preciso hacer porquese prueba que el combustible est& contaminado u oxidado (pasado). En general, se debe utili-zar el combustible dentro de los 30 dias posteriores a su fecha de compra.

, El deterioro y desgaste normales de las terminaciones exteriores, o la sustituci6n de las etiqu-etas del producto.

La bateria, la cual est& cubierta pot s61o 90 dias, como se establece a continuaci6n.90 DiAS PARA LA BATERiAPor un plazo de noventa (90) dias a partir de la fecha de compra, si la bateria que viene con estetractor presenta algQn defecto de materiales o de fabricaci6n (al probarla, comprobamos que nomantiene la carga), le ser& reemplazada sin costo.Durante los primeros 30 dfas a partir de la compra, no se le cobrar& por realizar el reemplazo de labateria en su domicilio. Para su conveniencia, podr& seguir contando con la posibilidad de obtenerel servicio de la garantia a domicilio, pero en ese caso, deber& pagar un vi&tico. Usted podr& evi-tarse el costo del vi&tico si Ileva la bateria a un Centro de Servicios autorizado de Craftsman. Parasaber cu&l le queda m&s cerca, llame al 1-800-4-MY-HOME.La totalidad de la cobertura de la garantia del tractor y la bateria quedar& sin efecto en caso que elproducto sea utilizado con fines comerciales o de alquiler.La presente garantfa s61o ser& aplicable si el producto se encuentra dentro de los Estados Unidos.La presente garantfa le otorga derechos legales especfficos. Por otra parte, puede que ustedtenga otros derechos, los cuales varian de estado a estado.Sears, Roebuck and Co., Hoffrnan Estates, IL 60179

35

IMPORTANTE: Esta Maquina cortadora es capaz de amputar las manosy los pies y de lanzarobjetos, si no se observan las instrucciones de seguridad siguientes se pueden producir lesionesgraves o la muerte.

_a_DVERTENClA: Siempre desconecte elalambre de la bujfa y p6ngalo donde no puedaentrar en contacto con la bujfa, para evitar elarranque por accidente, durante la preparaci6n,el transporte, el ajuste o cuando se hacenreparaciones._&.DVERTENClA: No avance cuesta abajo apunto muerto ya que podrfa perder el controldel tractor._ADVERTENClA: Remolque solamente losaccesorios recomendados y conformes alascaracterfsticas indicadas por el fabricante desu tractor. Tenga cuidado y prudencia al utiNzarel tractor. Cuando se encuentre en un decNve,oper utiNzando exclusivamente la velocidadm&s baja. En caso de un decNve una carga ex-cesiva podrfa resultar peNgrosa. Los neum&ti-cos pueden perder la tracci6n con el suelo yhacerle perder el control de su tractor._ADVERTENClA: El tubo de escape delmotor, algunos de sus constituyentes y algunoscomponentes del vehfculo contienen o despren-den productos qufmicos conocidos en el Estadode California como causa de c&ncer y defectosal nacimiento u otros dahos reproductivos._DVERTENCIA: Los bornes, terminales yaccesorios relativos de la baterfa contienenplomo o compuestos de plomo, productosqufmicos conocidos en el Estado de Californiacomo causa de c&ncer y defectos al nacimientou otros daSos reproductivos. Lavar lae manoedespu6s de manipularloe.I. FUNCIONAMIENTO GENERAL

Leer, entender y seguir todas las instruccio-nes sobre la m&quina yen el manual antesde empezar.

No porter las manos o los pies cerca departes giratorias o debajo de la m&quina.mantener siempre Nmpia la abertura dedescarga.

, Permitir el funcionamiento de la [email protected] a adultos que tengan famiNaridad conlas instrucciones.

Limpiar el &rea de objetos como piedras,juguetes, cables, etc. que pueden ser recogi-dos y disparados con las cuchiNas.

Asegurarse de que el &rea est@ Nbre de otraspersonas antes de ponerla en marcha. Pararla [email protected] si alguien entra en el @.rea.

, Nunca Ilevar pasajeros., No cortar marcha atr&s al no ser absolu-

tamente necesario. Mirar siempre abajo ydelante mientras se procede atr&s.

Nunca dirigir el material descargado hacianadie. Evitar descargar material contraparedes u obstrucciones. El material podrfarebotar hacia el operador. Parar las cuchiNascuando se pasan superficies de grava.

No hacer funcionar la maquina sin elcaptador de hierba entera, la protecci6n dedescarga u otros dispositivos de seguridaden su lugar yen buenas condiciones.

, Ralentizar antes de girar., Nunca dejar una [email protected] sin vigi-

lancia. Apagar siempre las cuchillas, poner elfreno de estacionamiento, parar el motor, yquitar las Ilaves antes de bajar.

Desconectar las cuchillas cuando no secorta. Apagar el motor y esperar que todaslas partes est@n completamente paradasantes de limpiar la [email protected], quitar el capta-dor de hierba, o desatascar la protecci6n dedescarga.

, Hacer funcionar la [email protected] con la luzdel dia o luz artificial buena.

, No hacer funcionar la [email protected] estando bajolos efectos de alcohol o droga.

Poner atenci6n al [email protected] se operacerca de canes o se cruzan.

Poner la [email protected] al cargar o descar-gar la [email protected] una caravana o cami6n.

, Llevar siempre gafas de protecci6n cuandose hace funcionar la [email protected].

, Los datos indican que los operadores apartir de los 60 ahos [email protected] porun gran porcentaje de heridas relativas a laconducci6n del cortac@sped. Estos opera-dores tendrfan que evaluar su habilidad dehacer funcionar el cortac@sped de modo Iobastante seguro para proteger a sf mismos ya otras personas de heridas graves.

, Seguir las recomendaciones del fabricantep

Documents

Craftsman Garden Tractor 917287451