Connectivity Guide - CXtec Inc., · 2008. 9. 9. · 2 cat5e (non-booted) patch cable 1 3 5 7 10 1 25 50 100 black 33805 33812 33819 33815 33822 33825 33828 33831 33839 blue 33804

800 767 [email protected]

At CXtec, we’re committed to maximizing value for our customers through needs-based customized solutions. Our wide range of products and services, combined with a wide variety of flexible financing options can help customers achieve their business objectives without blowing their budgets. No matter which solution fits their individualized needs, they all come standard with the exceptional customer service and technical support for which we’re famous.

Connectivity GuideCables: Fiber/CopperData CenterCabinets & RacksTesters & ToolsNetworking EquipmentVoice TechnologyAccessories

GSA: GS.35F.0315N

CXtec is the owner of the registered trademarks/service marks CXtec®, CABLExpress® and equal2new®.© 2007 CXtec. All rights reserved. All trademarks are property of their respective owners.

We’re the right connectivity choice.

LIFETIME WARRANTY

Our CABLExpress® Cables are backed by a lifetime warranty. All other products we carry come with a complete manufacturer’s warranty.

INDUSTRY STANDARDS

All our cables meet or exceed EIA/TIA standards.

IBM-QUALIFIED PRODUCTS

Our line of Enterprise Fiber products has a proven track record of reliability with world-class OEMs like IBM. They’re even constructed in IBM-certified plants.

EXTENSIVE INVENTORY

Our large stocking strategies on all cables result in shorter lead times, decreased costs and more availability.

CUSTOMIZATION

We can build to customers’ specifications.

LEGACY TO LEADING EDGE

From Token Ring and Bus & Tag to 10-gig Aqua, we carry both legacy products as well as the latest and greatest new technologies.

TAA COMPLIANT

Many of our products are TAA compliant and are assembled in the U.S. or other approved countries.

GSA CONTRACT

Many of our products are listed on our GSA schedule #GS-35F-0315N, including our CABLExpress Cables and equal2new® certified pre-owned networking and voice hardware.

HiCXtec is a global provider of new and certified pre-owned networking, voice and cabling technologies. Our international reputation as a proven resource began three decades ago when we first started distributing

mainframe data cabling. Today, we feature one of the industry’s only teams of cable specialists – so you can count on our dedication to

providing you with the right cables for your needs every time.

Our inventory has grown to include a full line of premise wiring products, and our reputation as a trusted partner is stronger than ever. We’re an ISO 9001

certified company committed to maximizing value for our customers through needs-based, customized solutions.

Check out some of the many reasons that CXtec is the right connectivity partner for you.

38 40 42 48

22 24 28 36

16 18 19 20

2 6 8 14

STORAGE, SWITCHES & VOICE

50

USB & FIREWIRE

Cables, Converters& Adapters

DISPLAY & AV

VGA, DVI, HDMI,DFP, RCA, S-Video& Pre-Terminated

MANUFACTUREREQUIVALENT

Cisco® EquivalentNortel™ Equivalent

POWER CABLES

Distribution, Conduit & PC Power Cables

PREMISE WIRING

RJ45, RJ11, RJ12,DB9, DB15, HD15

NETWORK TOOLS

Cutters, Pliers, Crimpers & more

MEDIA CONVERSION

Chassis, Modules& Standalones

FIBER CABLES & CONNECTORS

Riser Jumpers, Mode Conditioning Cables & Fiber Trunking

FIBER ENCLOSURES

Rack Mount, Wall Mount & Panels

10-GIGABIT FIBER

Jumpers, Harnesses, Trunks & Panels

CABINETS & RACKS

Racks, Enclosures& Cable Management

CABLE TESTERS

Copper Testers& Fiber Testers

LEGACY CABLES

Bus & Tag, ESCON®,Centronics® & v.35

See what else CXtec has to offer with this small sampling of some of our other product categories, including a few of our most popular equal2new products.

BULK CABLE

Cat5E, Cat6PVC or Plenum

SAN BIG PICTURE

26Take a look at how networks come together.CONNECTOR GUIDE

56Diagrams and information for 44 connector types.

PRE-TERMINATEDCOPPER & FIBER

Cat6 Copper & Fiber

NETWORK CABLES

Cat5E, Cat6& GSA Schedule

Table of Contents

www.cxtec.com 800 767 3282 [email protected]

2

CAT5E (NON-BOOTED) PATCH CABLE

1’ 3’ 5’ 7’ 10’ 14’ 25’ 50’ 100’black 33805 33812 33819 33815 33822 33825 33828 33831 33839

blue 33804 26374 26379 26384 26389 26394 26399 33832 33838

gray 33883 26377 26382 26387 26392 33863 26402 33890 33891

green 33808 26375 26380 26385 26390 26395 26400 33835 33842

orange 33810 33814 33821 33818 33824 33826 33830 33837 33844

purple custom 34800 34801 34802 34803 34804 34805 34806 34807

red 33806 26376 26381 26386 26391 26396 26401 33833 33840

white 33809 33813 33820 33817 33823 33827 33829 33836 33843

yellow 33807 26378 26383 26388 26393 26398 26403 33834 33841

CAT5E (MOLDED BOOT) PATCH CABLE

1’ 3’ 5’ 7’ 10’ 14’ 25’ 50’ 100’black 33899 33896 33907 33910 33860 33887 33917 33924 45943

blue 33900 25477 25482 33932 25488 33888 33919 33925 45945

gray 33901 25475 25480 25486 25491 33886 33918 33926 45944

green 33904 25471 25478 25484 25489 33864 33381 33929 45948

orange 33906 33898 33909 33913 33885 33916 33923 33931 45950

purple 34782 34783 34784 34785 34786 34787 34788 34789 45952

red 33902 33379 25479 33933 25490 33889 33920 33927 45946

white 33905 33897 33908 33911 33884 33862 33922 33930 45949

yellow 33903 25476 25481 31164 31165 33861 33921 33928 45947

• Carry data, voice, and video (at speeds up to 350MHz and beyond)• Available with snag-free boots for easy installation• Conforms with all ANSI, EIA and TIA standards• Stock lengths and colors available for same-day shipping• All CABLExpress® Cables carry a Lifetime Warranty.

Cat5E

RJ45 Pinning Assignments and Wiring Standards

Ethernet uses pins 1, 2, 3 & 6

Ethernet PatchPin 1 to Pin 1 Pin 2 to Pin 2Pin 3 to Pin 3 Pin 6 to Pin 6

Ethernet CrossoverPin 1 to Pin 3 Pin 2 to Pin 6Pin 3 to Pin 1 Pin 6 to Pin 2

Gigabit Ethernet PatchPin 1 to Pin 1 Pin 5 to Pin 5Pin 2 to Pin 2 Pin 6 to Pin 6Pin 3 to Pin 3 Pin 7 to Pin 7Pin 4 to Pin 4 Pin 8 to Pin 8

Gigabit Ethernet CrossoverPin 1 to Pin 3 Pin 5 to Pin 8Pin 2 to Pin 6 Pin 6 to Pin 2Pin 3 to Pin 1 Pin 7 to Pin 4Pin 4 to Pin 7 Pin 8 to Pin 5


Network Cables

CAT6 (NON-BOOTED) PATCH CABLE

1’ 3’ 5’ 7’ 10’ 14’ 25’ 50’ 100’black custom 230794 230795 230796 230797 230798 213226 custom custom

blue custom 230804 230805 230806 230807 230808 230809 custom custom

gray custom 230789 230790 230791 230792 230793 204742 custom custom

green custom 230799 230800 230801 230802 230803 212232 custom custom

red custom 230810 203743 203837 230811 203843 203847 custom custom

white custom 230816 230817 230818 230819 230820 209738 custom custom

yellow custom 230812 230813 230814 203841 230815 230849 custom custom

CAT6 (MOLDED BOOT) PATCH CABLE

1’ 3’ 5’ 7’ 10’ 14’ 25’ 50’ 100’black custom 230828 230829 230830 230831 230832 230833 230864 213218

blue custom 201548 201549 228940 230838 228938 230839 230870 203919

gray custom 230822 230823 230824 230825 230826 230827 230866 204748

green custom 228933 230834 228935 230835 230836 230837 230868 213263

red custom 230840 230841 230509 230842 230510 230843 230872 203920

white custom 230850 229891 230851 230852 229890 230853 230876 209746

yellow custom 230844 230845 230846 230847 230848 230849 230874 203921

• Carry data, voice, and video (at speeds up to 550MHz and beyond)• Available with snag-free boots for easy installation• Conforms with all ANSI, EIA and TIA standards• Stock lengths and colors available for same-day shipping• Backwards compatible with Cat3, 5, and 5E• Great way to future-proof your wiring infrastructure• All CABLExpress Cables carry a Lifetime Warranty.

Cat6

• New thermal technology allows us to label cables better than ever!

• Fast turnaround time.• Call for more information.

• Company Logo• Bar Code• Serial Number

Custom Labeling• Instructions• Cable Lengths• Anything!

CAT5E (NON-BOOTED) PATCH CABLE

1’ 3’ 5’ 7’ 10’ 14’ 25’ 50’ 100’black 232037 232042 232053 232055 232057 232061 232066 232071 232078

blue 232105 232106 232111 232116 232118 232119 232138 232140 232142

gray 232086 232089 232091 232093 232095 232098 232100 232103 232104

green 232073 232075 232076 232077 232079 232080 232082 232084 232085

orange 232120 232121 232122 232123 232124 232125 232126 232127 232128

purple 232200 232201 232202 232203 232204 232205 232206 232207 232208

red 232143 232144 232147 232149 232151 232153 232154 232155 232157

white 232107 232108 232109 232110 232112 232113 232114 232115 232117

yellow 232058 232060 232062 232063 232064 232065 232067 232068 232070

CAT5E (MOLDED BOOT) PATCH CABLE

1’ 3’ 5’ 7’ 10’ 14’ 25’ 50’ 100’black 232035 232039 232050 232074 232083 232088 232090 232092 232096

blue 232165 232166 232167 232168 232171 232174 232177 232178 232179

gray 232101 232134 232137 232139 232141 232146 232150 232158 232159

green 232081 232087 232097 232099 232102 232130 232132 232133 232136

orange 232172 232173 232175 232176 232190 232191 232193 232195 232196

purple 232040 232041 232043 232045 232046 232047 232049 232051 232052

red 232180 232181 232182 232183 232184 232185 232189 232192 232194

white 232145 232148 232160 232161 232162 232163 232164 232169 232170

yellow 232036 232038 232044 232048 232054 232056 232059 232069 232072

In addition to 100% compliance with ANSI, TIA, EIA & RoHS,all GSA Schedule cables are TAA compliant.100%

T A A - C O M P L I A N T


�

CABLExpress® Cables are all RoHS compliant as required by the European Union (EU) starting on July 1, 2006.

CXtec has written documentation that all products and components of products manufactured by CXtec and its suppliers are all compliant with this new legislation. The legislation states that all Electrical and Electronic Equipment (EEE) must have zero traces of lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). These metals have proven hazardous to the environment. Many U.S. states have decided to follow the EU’s lead and develop similar material restrictions for electronic products.


CAT6 (NON-BOOTED) PATCH CABLE

1’ 3’ 5’ 7’ 10’ 14’ 25’ 50’ 100’black custom 232211 232214 232217 232220 232236 232237 232238 232239

blue custom 232210 232213 232216 232219 232221 232223 232224 232225

gray custom 232226 232227 232228 232229 232230 232231 232233 232235

green custom 232240 232241 232242 232243 232244 232246 232247 232249

red custom 232251 232252 232254 232256 232258 232259 232260 232261

white custom 232263 232265 232266 232268 232269 232270 232271 232272

yellow custom 232212 232215 232218 232222 232250 232253 232257 232262

CAT6 (MOLDED BOOT) PATCH CABLE

1’ 3’ 5’ 7’ 10’ 14’ 25’ 50’ 100’black custom 232414 232416 232417 232418 232419 232420 custom custom

blue custom 232525 232526 232527 232529 232411 232530 custom custom

gray custom 232538 232539 232540 232541 232542 232543 custom custom

green custom 232544 232545 232546 232547 232548 232549 custom custom

red custom 232504 232505 232506 232507 232508 232509 custom custom

white custom 232442 232443 232444 232445 232446 232447 custom custom

yellow custom 232497 232498 232499 232500 232501 232502 custom custom

Network Cables

1’ 3’ 5’ 7’ 10’ 14’ 25’ 50’ 100’black 232037 232042 232053 232055 232057 232061 232066 232071 232078

blue 232105 232106 232111 232116 232118 232119 232138 232140 232142

gray 232086 232089 232091 232093 232095 232098 232100 232103 232104

green 232073 232075 232076 232077 232079 232080 232082 232084 232085

orange 232120 232121 232122 232123 232124 232125 232126 232127 232128

purple 232200 232201 232202 232203 232204 232205 232206 232207 232208

red 232143 232144 232147 232149 232151 232153 232154 232155 232157

white 232107 232108 232109 232110 232112 232113 232114 232115 232117

yellow 232058 232060 232062 232063 232064 232065 232067 232068 232070

1’ 3’ 5’ 7’ 10’ 14’ 25’ 50’ 100’black 232035 232039 232050 232074 232083 232088 232090 232092 232096

blue 232165 232166 232167 232168 232171 232174 232177 232178 232179

gray 232101 232134 232137 232139 232141 232146 232150 232158 232159

green 232081 232087 232097 232099 232102 232130 232132 232133 232136

orange 232172 232173 232175 232176 232190 232191 232193 232195 232196

purple 232040 232041 232043 232045 232046 232047 232049 232051 232052

red 232180 232181 232182 232183 232184 232185 232189 232192 232194

white 232145 232148 232160 232161 232162 232163 232164 232169 232170

yellow 232036 232038 232044 232048 232054 232056 232059 232069 232072

CAT5E (NON-BOOTED) CROSSOVER CABLE

1’ 3’ 5’ 7’ 10’ 14’ 25’ 50’ 100’red custom 210723 210724 210725 210726 210727 210728 custom custom

Use a crossover cable to connect the transmit pairing on one end of a device to the receive pairing on the end of another like device. For example, use crossover cables to connect hubs to hubs, routers to routers, and computers to computers. See RJ45 Pinning Assignments and Wiring Standards on Page 2.



6

USB A/B MOLDED MALE TO MALEPart # Length212602 3ft 218985 6ft 227256 10ft 215336 15ft

Connects your computer to any USB device with Type B female port. Allows you to connect peripherals such as printers, scanners, and storage drives. Supports USB speeds up to 480Mbps.

USB A MALE TO FEMALE ExTENSIONPart # Length228524 6ft228513 10ft218249 15ft

Extends the length of any USB cable with Type A connector. Works with Type A/A or A/B cables. If total length exceeds 15ft, an active repeater may be required.

USB CONVERTERS/ADAPTERS

Part # Description

201607 6ft USB to IEEE 1284 parallel printer bidirectional cable

204045 USB to Ethernet broadband Internet adapter

224607 2ft DB9 male to USB RS232 serial adapter cable

228526 2 port USB 2.0-compliant PCI card

203587 4 port USB Dataswitch

221856 USB 2.0 to IDE Adapter kit

221855 3ft USB 2.0 to Ethernet broadband Internet adapter

222740 16ft USB 2.0 active repeater (Type A male to Type A female)

Up to two active USB extension cables can be connected together resulting in a length of 10 feet. By adding the 10 feet of USB extension cables to an existing 5-foot USB cable, a maximum distance of 15 feet between USB devices is achieved. Longer distances require an active repeater, such as the one available on this page.

5ft 5ft5ft

15ft

5ft 5ft

10ft

CPU

CPU

USB device

USB device

Need a different USB solution? Call one of our Cable Specialists!

Extending USB


Why Use FireWire?

FireWire connections can be found on all common digital video recorders and are used to connect video devices to television monitors and receivers. FireWire allows for faster transmission of digital content and for peer-to-peer communication (connection of two devices without the aid of system memory or a CPU).

USB & Firewire

FIREWIRE® 800 9-PIN MALE TO 4-PIN MALEPart # Length 224469 10ft224470 15ft

Connect your digital media equipment with these cables and experience a much faster transfer rate than regular FireWire cables. These cables will connect any computer with a 9-pin FireWire 800 port to any device with a 4-pin port. Tested to support 800Mbps. Call for other FireWire 800 pin types.

FIREWIRE 400 4-PIN MALE TO 4-PIN MALEPart # Length 38672 3ft212480 6ft

Connects any computer or device with a 4-pin port to any FireWire device with a 4-pin port such as digital video camcorders. This premium cable is IEEE-1394 compliant and tested to support 400Mbps.

FIREWIRE 400 6-PIN MALE TO 4-PIN MALEPart # Length 38667 3ft 48249 6ft 38669 10ft 38670 15ft210539 25ft

Connects any computer with a 6-pin port to any FireWire device with a 4-pin port, such as digital video camcorders. This premium cable is IEEE-1394 compliant and tested to support 400Mbps.

FIREWIRE 400 6-PIN MALE TO 6-PIN MALEPart # Length 38662 3ft212479 6ft 38664 10ft 38665 15ft 208505 25ft

Connects any computer with a 6-pin port to any FireWire device with a 6-pin port. This cable is IEEE-1394 compliant and tested to support 400Mbps. It is ideal for mobile users, and it reduces cable clutter.

FireWire 400IEEE-13946-pin

FireWire 400IEEE-13944-pin

FireWire 800IEEE-1394b9-pin

FireWire

8

RCA PREMIUM TRIPLE COMPONENT CABLEPart # Length 222283 6ft 222284 12ft 225947 50ft

Connects any DVD player, television, VCR, receiver, projector or other home theater device with component video connectors. This cable has molded, gold-plated connectors with red, green and blue color-coding.

5 RCA PREMIUM COMPONENT CABLEPart # Length 221689 12ft 221378 25ft

Connects any DVD player, television, VCR, receiver, projector or other home theater device with component audio and video connectors. This cable has molded, gold-plated connectors with color-coding (red and white for audio; red, green and blue for video).

S-VIDEO MINI-4 MALE TO MINI-4 MALEPart # Length 222112 6ft 200189 12ft

Connects any digital camcorder, S-VHS VCR, DVD player, satellite receiver or computer with S-Video port. This cable provides low-loss connections from your computer's S-Video to any appliances with S-Video ports. It has gold-plated connectors and double shielding to protect against radio frequency and electromagnetic interference.

DVI / DFP STRAIGHT ADAPTER

DVI / SVGA STRAIGHT ADAPTER

HDMI MALE TO MALE CABLE

DVI MALE TO MALE CABLE

HDDB15 MALE TO FEMALE OR MALE TO FEMALEThese VGA cables have triple shielding for maximum graphics performance. Prevents signal loss, screen ghosting and loss of color. Works up to 150ft without a signal booster.

3’ 6’ 10’ 15’ 25’ 50’ 100’male to male 47507 11406-6 11406-10 11406-15 11406-25 11406-50 227261

male to female 206951 11441-6 11441-10 11441-15 26886 212303 204249


Display & AV

DVI-D vs. DVI-I

Have a question about whichAV cable is right for you?

Call us to see(and hear) the light.

• DVI-D stands for DVI-Digital.

• DVI-I indicates a DVI cable or adapter that supports both analog and digital. This allows a user to connect DVI-style adapters to any monitor with a VGA connection, thus creating an easy future-proofing transition (as more and more offices convert to flat-panel displays).

• Higher resolution displays require what is known as a dual link DVI connection, or DVI-DL. This connector style allows for a second data transmission that enables high- resolution displays.

DVI / DFP STRAIGHT ADAPTERPart # Description 232567 HDMI male to DVI female 232568 HDMI female to DVI male

Gold-plated. Ideal for connecting DVD players, video game units, PCs, or AV receivers to LCD or flat-panel televisions.

DVI / SVGA STRAIGHT ADAPTERPart # Description 211833 DVI male to SVGA female 204251 DVI female to SVGA male

Connects any SVGA monitor with HD15 male to any computer with DVI port. To support analog, DVI port must have DVI-I.

HDMI MALE TO MALE CABLEPart # Length 228650 1M228651 2M228652 3M228653 5M228654 8M228655 15M228656 20M228657 30M228658 35M

Connects any HDTV set-top box, DTV, DVD, switch or splitter with HDMI. This premium cable supports high-bandwidth video.

DVI MALE TO MALE CABLEPart # Length 202622 6ft 210261 10ft 203925 15ft 224117 20ft217532 25ft225335 30ft

Double-shielded and supports both single- and dual-link, high-speed DVI signals.

10

HDMI – This digital audio/visual transmission format is supported by almost all modern consumer electronics such as next generation computers, video game systems, and televisions.

DVI – Capable of sending analog and digital signals, this connector style is commonly found on flat-panel displays and video projection units.

DFP – Found on some earlier versions of flat-panel displays, this connector style started as a rival to the DVI format. However, it never received widespread implementation.

VGA – The most common connector style for all PCs, this analog transmission style is slowly being phased out for the more technologically advanced, digital HDMI version of video transmission.

RCA – Developed in the 1940s, this connector style is commonly found in most audio/visual peripherals. This type of platform only allows for one signal transmission, which often results in an abundance of cabling behind devices.

AV Connector Syles

DVI / DFP MALE TO MALE CABLEPart # Length 202623 6ft 204260 10ft

Connects any 20-pin DFP flat-panel monitor to any computer with DVI port, or vice versa.

DVI / HDMI MALE TO MALE CABLEPart # Length 228706 2M228707 3M228708 5M 228709 8M 228710 15M228711 30M

Connects any DVI digital flat-panel, home theater device such as DVD players, set-top boxes and receivers, televisions, projectors, switches or splitters with HDMI to DVI, or vice versa. This premium high-performance cable supports HDCP, high-bandwidth, uncompressed video. It is RoHS Green Certified and is produced using laser jacket stripping and aluminum foil cutting with precise machine soldering. Selected lengths are available with swivel-head adapters.

DVI / SVGA MALE TO MALE CABLEPart # Length 200373 6ft 200372 10ft

Connects any VGA monitor with HD15 female to any computer with DVI port, or vice versa. To support analog, DVI port must have DVI-I.


Display & AVRapidRun™ is the first interconnect system designed from the ground up to evolve with the components of your installation. Based upon the Multi-Use Versatile Interconnect system (MUVI™), RapidRun can handle whatever signal you need, whenever and wherever you need it. It’s destined to revolutionize the custom installation industry.

RapidRun is a simple, modular system that consists of two main component types:• Base cables (called runners, available in UXGA, 5-Coax or digital)• Termination ends (in the form of break-aways and wall plates)

RapidRun

UXGA RUNNERS ALL RAPIDRUN RUNNERS END IN FEMALE MUVI CONNECTORSThe PC/Video (UXGA) Runner designed primarily for presentation applications using a computer and projector or other large display. This cable provides three close-tolerance coaxial conductors with full, independent braided shielding and four twisted pairs. This runner can accommodate UXGA (HD15) computer, component video with left and right audio, S-video with left and right audio, or composite video with left and right audio signals.

15’ 25’ 30’ 35’ 50’ 75’ 100’ 125’ 150’pvc 233733 233734 N/A 233214 231808 233738 233739 233741 233742

plenum 233740 233743 234965 233745 233746 233746 233748 233749 233752

5-COAX RUNNERS ALL RAPIDRUN RUNNERS END IN FEMALE MUVI CONNECTORSThe 5-Coax Runner is designed primarily for audio/video applications such as a home theater installation or a multi-room A/V hookup. This cable provides five 75-ohm mini-coax conductors, each individually shielded and designed for maximum flexibility. This runner will support nearly any A/V signal from RGBHV to HDTV component video, from S-video and component video on one easy pull (ideal for ceiling-mounted projectors) to composite video and audio for basic distribution.

15’ 25’ 30’ 35’ 50’ 75’ 100’ 125’ 150’pvc 234293 234299 N/A 234300 234301 234302 234303 234304 234305

plenum 234954 234956 234963 234959 234962 234964 234957 234960 234961

YELLOW RUNNER

BLUE RUNNER

YELLOW RUNNER BLUE RUNNER

DIGITAL RUNNERS ALL RAPIDRUN RUNNERS END IN FEMALE MUVI CONNECTORSCall for information about our full selection of digital runners.

RED RUNNER

RUNNER

COMPATIBLETERMINATION ENDS

RED RUNNER

YELLOW ENDS BLUE ENDS RED ENDS

GREEN ENDS GREEN ENDS

12

FLYING LEADS MALE MUVI TO INTERFACE NOTED

Once you’ve selected the right runner for your job, select the proper break-away terminators. With the same high-quality specifications as the runner, break-aways will never compromise the integrity of the signal path. Two types of break-aways are available: Decora style wall plates or flying leads. There is no performance difference or installation penalty, so you can choose the connection that’s right for you!

Part # Photo Length Description

RCA

234939 A 1.5ft (3) RCA male (RGB)

233202 B 1.5ft (2) RCA male audio, (1) s-video male

233204 C 1.5ft (3) RCA male (yellow, red, white)

HD15238258 D 1ft (1) HD15 male, (1) 3.5mm audio male

231810 E 1ft (1) HD15 male

DVI

239334 1.5ft (1) DVI male

239335 F 3ft (1) DVI male

239336 6ft (1) DVI male

239337 10ft (1) DVI male

HDMI

239391 1.5ft (1) HDMI male

239392 G 3ft (1) HDMI male

239394 6ft (1) HDMI male

239395 10ft (1) HDMI male

OTHER

233751 H 1.5ft (5) BNC RGBHV

233754 I 1.5ft (5) RCA male: (3) RGB, (2) audio

233757 J 1.5ft (3) RCA male (RGB), (1) s-video male

233758 K 1.5ft (4) RCA male: (3) RGB, (1) digital audio

A

B

C

E

D

G

F H

I

J

K

YELLOW

RED

GREEN

GREEN

GREEN

YELLOW

RED

GREEN

GREEN

GREEN

GREEN


WALL PLATES MALE MUVI TO INTERFACE NOTED

Display & AV

• All runners come with a pulling eye for easy attachment to a wire, allowing runners to be pulled through a conduit

• Easy to change applications without having to run more cabling through a wall

• Perfect for future-proofing your audio/video environment

• Ideal for any conference room, hospital, or educational environment

Why RapidRun?

Call us with questions about your RapidRun

configuration!Part # Photo Description

RCA

233272 L (3) RCA female (RGB)

233845 M (2) RCA female audio, (1) s-video female

233215 N (3) RCA female (yellow, red, white)

HD15239400 O (1) HD15 female, (1) 3.5mm audio female

233842 P (1) HD15 female

DVI 239388 Q (1) DVI passive

HDMI239389 R (1) HDMI active

239390 (1) HDMI passive

OTHER

233843 S (5) BNC RGBHV

233839 T (5) RCA female: (3) RGB, (2) audio

233840 U (3) RCA female (RGB), (1) s-video female

233844 V (4) RCA female: (3) RGB, (1) digital audio

S

T

U

V

P

Q

R

L

M

N

O

YELLOW RUNNER

BLUE RUNNER

RED RUNNER

RED ENDS

BLUE ENDS

GREEN ENDS

YELLOW ENDS

GREEN ENDS

GREEN

GREEN

GREEN

GREEN

GREEN

YELLOW

YELLOW

RED

RED

BLUE

BLUE

1�

DB25 / DB60Part # Description 206015 10ft DB25 female to DB60 male DCE 206018 10ft DB25 male to DB60 male DTE

Join us in our mission of resourcefulness with this router cable. Works with many Cisco family routers, including the 7000.

DB15 / DB60Part # Description 206226 10ft DB15 female to DB60 male DCE206228 10ft DB15 male to DB60 male DTE

Quality cables at CABLExpress® prices. Works with most Cisco family routers (up to 7000 family).

SMART SERIAL

Part # Description 206017 10ft serial male to DB25 DCE female33895 10ft serial male to DB25 DTE male206220 10ft serial male to DB37 DCE female206222 10ft serial male to DB37 DTE male206227 10ft serial male to DB15 DCE female206229 10ft serial male to DB15 DTE male 206231 10ft serial male to V.35 DCE female205690 10ft serial male to V.35 DTE male

Connects a router containing any WAN Interface Card. Same great quality at a lower price.

HSSIPart # Description 207928 10ft HSSI male to HSSI male

Works just as well as Cisco HSSI cable. Will allow you to save money for other important areas of your network.

DB60 / V.35

Part # Description 206230 10ft DB60 male to V.35 female DCE27508 10ft DB60 male to V.35 male DTE

This Cisco equivalent V.35 cable has the ability to connect with any Cisco router without a decrease in performance.

CISCO® EQUIVALENT

CISCO EQUIVALENT

CISCO EQUIVALENT

CISCO EQUIVALENT

CISCO EQUIVALENT

Cisco Compatibility Chart

See our Connector Guide at the end of the catalog for diagram.

See our Connector Guide at the end of the catalog for diagram.

Part # Cisco Part # 7000 4000 3600 2500 1600 3000

23503 CAB-25AS-FDTE

206221 CAB-449MT

21787 CAB-25AS-MMOD

20430 CAB-AC

20456 CAB-ACU

20453 CAB-ACA

239516 CAB-ACE

20455 CAB-ACI

206228 CAB-X21MT

206223 CAB-530MT

206018 CAB-232MT

206230 CAB-V35FC

206015 CAB-232FC

206218 CAB-449FC

210020 CAB-HNUL

217522 CAB-V35FT

210783 CAB-NP232C

209621 CAB-NPV35CV2

= COMPATIBLE


2500 SERIES CONSOLE CABLEPart # Description 209840 8ft auxiliary console cable

Connect your Cisco router with our console cable in order to save your budget. Includes 8ft rollover cable, DB25/RJ45 adapter and a DB9/RJ45 adapter.

DB37 / DB60Part # Description 206218 10ft DB37 female to DB60 male DCE206221 10ft DB37 male to DB60 male DTE

Maintain bandwidth while leaving your budget in tact with this Cisco equivalent router cable. Works with routers within the Cisco 7000 family.

Manufacturer Equivalent

DB60 / DB60Part # Description 203582 3ft DB60 male to DB60 male208916 5ft DB60 male to DB60 male203583 10ft DB60 male to DB60 male203584 25ft DB60 male to DB60 male

Allows routers to communicate with each other without expensive hardware. Will increase performance as well as offer the ability to inexpensively connect various routers.

NORTEL™ EQUIVALENT CABLESPart # Description 207239 15ft 44 pin/V.35 raise DTR router cable206992 15ft 44 pin/V.35 male WAN router cable207235 15ft 44 pin/DB25 male raise DTR router cable39338 15ft 44 pin/DB25 male router cable207236 15ft 44 pin male/X.21 male router cable207237 15ft 44 pin/44 pin synchronous crossover cable208944 15ft DB50 male/X.21 male AN ANH BLN DCN router cable209341 15ft passport DB25 male/V.24 DCE cable 207238 15ft DB15 male/V.35 BLN BCN DTR router cable

Ensure a quality connection with these Nortel manufacturer equivalent cables. Screw locks ensure that the jack and the terminal connection will always be secure.

• We offer a wide variety of different manufacturer equivalent cables• All meet or exceed performance standards set by original manufacturer• Comes with a lifetime warranty• Saves your budget

Equivalent

CISCO EQUIVALENT

CISCO EQUIVALENT

CISCO EQUIVALENT

16

STANDARD NEMA CABLES(Photo A) NEMA cables are available in straight blade or locking configuration to meet your specific data center application. NEMA cables can be specified with single or multiple circuits, custom-trimmed conduit and tail lengths, optional isolated ground wire, custom conductors, conduit type and color.

Our power distribution cables are UL Listed, highly flexible, and approved for data center environments. They can be custom labeled at either or both ends and are 100% tested and ready to install. Backed by a lifetime replacement guarantee, these cables are available with circuit breaker brand of choice. 24-hour delivery is available. Power Distribution Cables

National Electric Code (Article 645-5e) Under Raised Floors: Power cables must be “securely fastened in place by an approved means within 12 in. (305 mm) of each box, cabinet, conduit body or other termination and shall be supported and secured at intervals not to exceed 4.5ft (1.37m). Article 351-8. Power cables and associated boxes, connectors, plugs and receptacles that are UL Listed as part of, or for information technology equipment shall not be required to be secured in place.”

Available connector styles:

Nema 5-20R2Nema 5-20R4L5-20R1

L6-30R1L21-30R1L6-30R1IG

RUSSELLSTOLL® & IEC CABLES(Photo B) Cables made with pin-and-sleeve devices, in-line connectors, recep-tacles, back-boxes for data center raised floor and wall mount applications. Used where electrical connections need to be protected from humidity, water, condensation and/or dust ingress to the wiring compartment and contacts. Pin and Sleeve Cables can be specified with custom-trimmed conduit and tail lengths, custom conductors, conduit type and color.

Available connector styles:

RS3913RS3933RS7428-78

9C54U2/C75IEC430CIEC460C

CONDUIT APPROVED FOR USE IN RAISED FLOOR ENVIRONMENTSLiquidTight – LiquidTight Conduit is a flexible metallic conduit encased in a PVC jacket that has an integral copper ground bond.

Greenfield – Similar to LiquidTight conduit but without the PVC jacket and without the integral copper ground strip.

Metal Clad – Smaller in diameter than Greenfield conduit, this option comes with the wiring already loaded into the conduit for easier installation.

A B


Power Cables

PC POWER NORTH AMERICANThese high-quality cables are compatible with any plug in the United States. NEMA 5-15 power cords include a ground wire, which makes the handling of this power cord more safe. Available in a variety of connector styles and lengths, CXtec can meet the needs of any power requirement.

Part # Description 229711 1ft 224418 1.3ft224419 2ft 216544 3ft228148 6ft 229376 6ft (notebooks)

HOSPITAL GRADE NORTH AMERICANOur hospital grade power cables have an ultra-high strain relief and a clear plastic plug. The NEMA 5-15P power cable conforms to all standards for medical equipment.

Part # Description 229708 6ft 229710 8ft 229375 10ft

INTERNATIONALThese power cables provide complete compatibility with electronic devices in other regions of the world. Available in a variety of lengths.

Part # Description 229378 6ft European notebooks229382 6ft British notebooks229380 8ft European227306 8ft British229381 8ft Australian

Part # Description 218680 6ft extension226332 8ft extension234805 10ft extension236342 12ft extension

Power Extension Cables

Power PlugsNEMA 5-15PUsed in the US, this connector plugs into a standard 3-prong outlet.

IEC 60320-C13This connector is commonly found on the backs of computers, routers and switches.

IEC 60320-C7Can be used to plug into notebook computers, VCRs and other devices that use 2-slot, non-polarized power cables.

CEE 7/16Fully compatible with European power receptacles, this plug is commonly used in conjunction with standard electronic equipment.

BS 1363Common connector style found in the British Isles, this is the connector on what is known as a 13-amp power cable.

AS 3112This connector style is found in Australia and other South Pacific countries.

IEC 60320-C14This plug is commonly used to connect auxiliary power supplies into corresponding equipment.

You’ve got the power!Call us for all your cabling options.

18

When laying fiber trunking between offices within an outdoor/underground environment, one must be aware of many new variables that can affect the performance of the fiber. Aspects such as water damage, animal interference, and chemical interaction can seriously damage an outdoor fiber infrastructure. In order to combat this, fiber manufacturers developed a form of bulk fiber that is filled with gel to make the cable impervious to water, animal damage, and chemicals. While this is acceptable for straight, distances and high-thread trunks, gel-filled fiber is not a viable option when trying to keep installation costs low or in situations where installation requires bending the wire around multiple obstacles. For this application, Tight Buffer construction is a better-suited option. While providing excellent protection against water, animals and chemicals, this fiber cable terminates much more easily and has a tighter bend radius.

Gel vs. Tight Buffer

• Installing Cat6 cable is a great way to future-proof your infrastructure.

• Cat6 is backwards-compatible with Cat5E.

• Many new building regulations are requiring the use of plenum-rated cabling for cable runs in between walls. Plenum-rated cables have a fire-retardant jacket coating.

Bulk Cable

• Allows for direct termination with connectors• Reduces installation cost by reducing labor costs, material

costs and breakout kits• Eliminates splice loss• Can be used in both indoor and outdoor environments• Compact cable design for limited conduit space• Ideal for long cable pulls• Available in 2-to 156-fiber counts

Tight Buffer Bulk Fiber

BULK CABLE

Cat5E Cat6

solid PVC

solid PlE

solid PVC

solid PlE

blaCk 207455 207547 213140 212873

bluE 207441 207257 209166 211941

gray 207453 207548 201925 212871

grEEn 207458 207545 213772 213773

orangE 207447 207546 213770 213774

PurPlE 207454 207428 213769 213775

rEd 207446 207542 213139 212872

whitE 207435 207541 211943 211942

yEllow 207440 207544 210019 212870

RJ45 MODULAR PLUG

RJ11 & RJ12 MODULAR PLUG

SLIMLINE CONNECTOR


Premise Wiring

Gender changers give you the ability to connect cables that have the same gender. Gender changers are essential for anyone who is working out in field environments because they provide a solution to a problem that could be very expensive and timely to fix.

Simply plug one male end into one side of the adapter, then plug the other male end into the other side. Now you have a connection that will allow a seamless flow of data. Note: Gender changers are also available for changing two female adapters.

Slimline Usage

Need RJ modular adapters? We can custom-pin any

adapter.

RJ45 MODULAR PLUG

Part # Description 220140 Cat6 solid/stranded216025 Cat5E 8-position stranded UTP (2-piece assembly)219557 Cat6 with load bar

Modular plugs offering simultaneous connections through each individual stranded conductor are currently the industry standard. The gold plating also ensures a fast, interference-free connection.

RJ11 & RJ12 MODULAR PLUGThese Cat3 flat modular plugs have gold-plated contacts to ensure a connection that is reliable, fast and interference free.

Part # Description 215001 Cat3 stranded RJ11 4-position216876 Cat3 stranded RJ12 6-position

SLIMLINE CONNECTOR

Part # Description 202091 DB9, female to female202093 DB9, male to female202095 DB9, male to male202097 DB15, female to female 202092 DB15, male to male202627 HD15, female to female202628 HD15, male to female202629 HD15, male to male

Use these connectors and gender changers to connect computers without expensive hardware. Quickly and easily allow computers to communicate with each other. Shielding guarantees an interference-free connection and promotes a space-saving work environment.

DB15 HD15

DB9

20

PATCH PANEL RACK MOUNT

Part # Description 219694 12-port219695 24-port 219025 48-port220813 96-port

These preconfigured universal rack mount patch panels feature the industry standard 110 punch down termination block and offer the ability to write directly on the label screen or use printed labels.

Using equipment racks in your wiring closet can significantly enhance its functionality. Rack mounts come in various heights, and most network equipment is compatible with the standard 19" rack mount width. CXtec knows the importance of rack mount hardware too. In fact, every piece of rack-mountable equal2new® networking hardware we sell comes with rack mount hardware already attached for the convenience of our customers.

Standard Height Options

Equipment Racks

Part # Description 219832 12-port219833 24-port219834 48-port220573 96-port

Cat5E

Cat6

RJ45 KEYSTONE BOX

Part # Description 220896 1-port220897 2-port220898 4-port220899 6-port

These surface mount boxes guarantee a reliable connection. All jacks feature a 110 punch down jack as well as plenty of room for labeling to make installation and identification easier.

BRADY® LABELER HANDHELD

Part # Description 221747 ABC Style 221746 Keyboard Style

The first handheld cartridge-based labeling system that can print die-cut labels, self-laminating labels and sleeves as well as continuous tapes. Choose from two keyboard layouts, then select from a wide range of label materials engineered just for your application: wire and cable markers, panel and frame ID, facilities labels and specialty labels for labs and workspaces.

Cat5E, 24-port

Cat6, 48-port

2-port

Questioning your premise?

Call us.


Premise Wiring & Tools

RJ45 KEYSTONE JACK

Keystone jacks that comply with the industry standard of 110 punch down connectors make installation of any system even easier. Available in any color for easier identification and installation.

CAT5E CAT6

blACk 220596 220632

bluE 220595 220633

ivory 220599 220630

grEEn 220597 220631

orAngE 220598 220629

rEd 220600 220628

whiTE 220572 219791

yEllow 220601 220627Cat5E, Ivory Cat6, Blue

WALL PLATE SINGLE GANG FLUSH MOUNTIncrease the number of workstations in any given area while keeping the environment looking its best with these wall plates. Comes in five different sizes for your convenience.

1 2 3 4 6ivory 221078 221079 221080 221081 221083

white 220057 220694 220833 220695 220696

# OF PORTS

TOOLS

A B C D E F G H I

Part # Photo Description 216852 A RJ11 RJ45 UTP/ Telemaster® crimp tool 219553 B 8 position hand tool 218768 C 8 position die kit 229163 D RG59 RG6 8281 PVC/plenum coax cable stripper 221352 E Utility tool stripper/cutter 215264 F Electrician's scissors with stripping notches225451 G 6-inch high leverage diagonal cutting pliers 229161 H 6-inch long nose pliers223145 I Omniseal® RG6 compression tool221786 J Deluxe Cable Service Tool Kit: punchmaster with 110 and 66 blades, electrician's scissors with

stripping notches, UTP/STP stripper, 5-in-1 screwdriver, probe pic and spudger, tone generator, amplifier probe, journeyman's electrician's tote, linkmaster tester, remote and more.

J

1-port, Ivory

22

LINKMASTER™ PRO TESTERTests for shorts, opens, miswires, reversals, split pairs and shield continuity. Measures length on UTP, ScTP, and coax with or without remotes. Identifies up to eight twisted pair and coax remotes. Tone generator sends up to four different tones. Test results displayed in wire map format. Snap-off battery cap allows for easy battery change. Two size kits with unshielded and shielded cable assemblies. Part # 212964

Copper Testers Fiber Testers

AMPLIFIER PROBE & TONE GENERATOR KITCable tracing kit with advanced new features to give a complete signal tracing solution. Kit includes: tone generator amplifier probe, soft black nylon carrying case, cable assemblies and flat tip. Part # 222043

LINKMASTER TESTERTest wiring configuration on UTP and STP. Check for shorts, miswires, reversals and split pairs. Debug feature, automatic shut-off and low battery LED indicator. Main unit and remote allow one-person testing. Part # 212961

POE RJ-45 TESTERCheck your RJ-45 outlet for power using the PowerDsine® PoE Tester. The Power over Ethernet (PoE) Tester, connected to an RJ-45 outlet, tests the cabling infrastructure for the presence of power, either IEEE-802.3af standard compliant or pre-standard. The PoE Tester identifies the existence and type of Power Sourcing Equipment (either endspan or midspan) in your network. Part # 238535


FIBER RINGSFiber Rings, which provide 150m of 50µm or 62.5µm of singlemode fiber in a compact, light-weight ring, are ideal for testing optical fiber links (up to about 2km) in premises networks. Use as launch and/or receive cable.

VISUAL FIBER FAULT FINDERPhoto D. The visual fault finder is used to locate breaks or faulty splices within your cables. Useful for over 3 miles, this tool will let you know instantly if your wires are able to handle any project. Nylon carrying case included. Part # 212962

INTERFACE ADAPTER CAP FOR FIBER TESTERPhoto C. Used to mate non-angled single-fiber and dual-fiber connectors to optical power meter ports on OPM, T400, T500B and ORL 3B series test sets. Part # 227167

LOSS TEST KITPhoto B. The SMLP 5-5 test kit combines the OPM 5-2D optical power meter and the OLS 4 (integrated LED and laser light source) and is ideally suited for testing fiber optic networks with hybrid (singlemode and multimode) cables. Part # 216350

Cable Testers

Fiber Testers HANDHELD FIBER TEST KIT

Photo A. Hand-held OTDRs with integrated 650nm VFL. Ideal for Tier 2 testing of premises networks, certification and troubleshooting FTTP PON networks. Transflective display ideal for indoor and outdoor usage. Automatic and manual setup modes with event analysis, dual wavelength testing, rich file naming and folder setup. Typical 6 hours battery life. Internal and removable media data storage for thousands of trace file capacity, USB connectivity. Test ports tool free changeable (ST/SC/FC). Part # 237276

Part # Photo Description237277 E Multimode OTDR SC/SC fiber ring237311 Multimode OTCR SC/SC fiber ring 237279 F Singlemode SC/SC fiber ring

A

B

C

D

E

F

Note: specify connectors type x1, x2, y1, y2 at time of purchase.

2�

MEDIA CONVERTER CHASSIS

A. Transition® 8-Slot Point System ChassisThis one-rack unit chassis can support up to eight media converter modules and is ideal for media conversion where space is at a premium. Part #220621

B. Transition 19-Slot Point System Chassis This two-rack unit chassis can support up to 19 media converter modules, offering the highest conversion port density available. Part #212334

C. Single-Slot Management Module: This IP-addressable SNMP management module occupies one chassis slot and allows for complete management of all media converters and power supplies installed in the chassis. Part #206160

Transition AC Redundant Power SupplyAllows you to connect to a remote site to manage the conversion process. Works with 18-or 19-slot point system chassis. Part #201436

A

B

C

MEDIA CONVERTER MODULESD. Transition 100Base-TX RJ45 to 1000Base-FXIntegrate fiber into copper-based Fast Ethernet environments. Supported features include Auto-negotiation, AutoCross, Link Pass Through, Far End Fault detection, and Pause.Part # Description222292 100Base-TX RJ45 to 100Base-FX 1300nm MM ST 2km240788 100Base-TX RJ45 to 100Base-FX 1300nm MM SC 2km216332 100Base-TX RJ45 to 100Base-FX 1310nm SM SC 20km

E. Transition 1000Base-T to 1000Base-SX/LXExtend Gigabit Ethernet networks beyond 100-meter limitation of the 1000Base-T standard. Features include Auto-negotiation, AutoCross, Link Pass Through, Remote Fault Detect, and Pause.Part # Description217990 1000Base-T RJ45 to 1000Base-SX 850nm MM SC 220m238470 1000Base-T RJ45 to 1000Base-SX 1310nm Ext. MM SC 2km238011 1000Base-T RJ45 to 1000Base-SX 1310nm SM SC 10km

F. Transition 1000Base-SX to 1000Base-LXConnect singlemode fiber or Extended Multimode fiber to Gigabit Ethernet devices with multimode ports.Part # Description226473 1000Base-SX 850nm MM SC 220m to 1310nm SM SC 10km240288 1000Base-SX 850nm MM SC 220m to 1310nm Extended MM SC 2km

G. Transition Multimode to Singlemode CHII-BConnect singlemode fiber to multimode ports at up to 155Mbps. Part #207959

E

F G

Chassis-based media converters are ideal for situations where redundancy, network management and high-density deployments are required. Available in various port densities, these rack-mountable chassis support a variety of hot-swappable media converter modules designed for multiple protocol networks. SNMP management and redundant power supplies are options for high-demand networks.

D


STANDALONE MEDIA CONVERTERSH. Transition 100Base-TX RJ45 to 100Base-FXMedia converters can be used individually or in pairs to make connections between various devices. A single media converter will allow you to connect a 10/100 copper switch to a 100Mbps fiber switch. A pair of converters allow you to connect two 10/100 copper switches together over a fiber infrastructure. Part # Description206429 100Base-TX RJ45 to 100Base-FX 1300nm MM ST 2km206619 100Base-TX RJ45 to 100Base-FX 1300nm MM SC 2km208064 100Base-TX RJ45 to 100Base-FX 1310nm SM SC 20km

I. Transition 1000Base-T to 1000Base-SX/LXGigabit media converters can be used in conjunction with lower cost 1000Base-T switches to connect these devices to high-speed backbones.Part # Description217990 1000Base-T RJ45 to 1000Base-SX 850nm MM SC 220m238470 1000Base-T RJ45 to 1000Base-SX 1310nm Extended MM SC 2km238010 1000Base-T RJ45 to 1000Base-LX 1310nm SM SC 10km

J. Transition Fast Ethernet or ATM Multimode to SinglemodeWhen fiber-based devices have been installed, they generally only support multimode fiber. If the distance that singlemode offers is required, a multimode-to-singlemode converter can make those connections at speeds up to 155Mbps. Part #20330

K. Transition 1000Base Mode ConverterApplications requiring the speed of Gigabit and the distance of singlemode fiber will benefit from singlemode-to-multimode fiber converters for connecting Gigabit Ethernet devices. Part #226058

H

J

I

K

Media Conversion

Why use fiber?

• Data can be transmitted at greater distances on fiber optic cabling than is possible on copper UTP. Don’t spend your valuable IT dollars on installing a switch every 100 meters when you can run up to 2000 meters on multimode fiber.

• Fiber will protect your data from noise and interference when cabling is run through areas with high levels of electromagnetic interference.

• Fiber offers greater bandwidth carrying capacity than is available with copper UTP.

Why use media converters when deploying fiber?

• Protect your investment in your current copper-based switches, routers and NICs. Don’t throw this equipment out; connect their RJ-45 ports to media converters and connect the media converters to your fiber.

• Media converters allow you the flexibility to deploy fiber on an as-needed basis. Don’t get locked into a multi-port fiber switch when you only need a few points of fiber connectivity today. When you need more fiber, you can add more affordable media converters.

Converting Fiber

Call us for help in choosing which

conversion option is right for you.

26

the BIG picture

IBM Disk Storage

IBM Tape StorageNativeFICON

NativeFICON

Bus/TagCable

Bus/TagCable

High Speed Printer

Mainframe CPU

Remote Network3174 Controller

100Base-TX

TapeSubsystem

ESCONFiber

WAN

OSA expressGbE SX

FICONExpress SX

DWDMsinglemode

Remote Facility

MTP/MTP Trunk

MTP/MTP TrunkFibre Channel

Zone

Fibre Channel SAN

100Base-TXCat5E

Router

iSCSI Zone

Gigabit EthernetSwitch

iSCSI Initiators

iSCSI SAN

Tape Loader

Tiered/Pooled Storage Array Group

Pool BSales &Marketing

Pool AEngineering

VirtualServers

Tape Storage

Gigabit Ethernet

Disk Storage

Fibre Channel Hosts with Dual HBA’s

FICON

Redundant Directors

CPL CPLCPL

Welcome to the big picture of infrastructure cabling. From the mainframe to your SAN, this diagram is designed to give you a bird’s eye view of your data center without the hassle of learning to fly. You’ll find that all the fiber cables are appropriately color-coded to match industry standards for singlemode, multimode and 10-gig aqua. Also note that all the hardware is appropriately marked.

Note: This guide is for general reference only. Please feel free to contact CXtec with your requirements and we’ll provide you with the connectivity you need.

-

Welcome to the big picture of infrastructure cabling. From the mainframe to your SAN, this diagram is designed to give you a bird’s eye view of your data center without the hassle of learning to fly. You’ll find that all the fiber cables are appropriately color-coded to match industry standards for singlemode, multimode and 10-gig aqua. Also note that all the hardware is appropriately marked.

Note: This guide is for general reference only. Please feel free to contact CXtec with your requirements and we’ll provide you with the connectivity you need.


SAN Big Picture

IBM Disk Storage

IBM Tape StorageNativeFICON

NativeFICON

Bus/TagCable

Bus/TagCable

High Speed Printer

Mainframe CPU

Remote Network3174 Controller

100Base-TX

TapeSubsystem

ESCONFiber

WAN

OSA expressGbE SX

FICONExpress SX

DWDMsinglemode

Remote Facility

MTP/MTP Trunk

MTP/MTP TrunkFibre Channel

Zone

Fibre Channel SAN

100Base-TXCat5E

Router

iSCSI Zone

Gigabit EthernetSwitch

iSCSI Initiators

iSCSI SAN

Tape Loader

Tiered/Pooled Storage Array Group

Pool BSales &Marketing

Pool AEngineering

VirtualServers

Tape Storage

Gigabit Ethernet

Disk Storage

Fibre Channel Hosts with Dual HBA’s

FICON

Redundant Directors

CPL CPLCPL

28

PREMISE 62.5/125 MULTIMODE STOCKED RISER JUMPERS

1m 2m 3m 4m 5m 6m 7m 8m 9m 10m 12m 15m 20m 30mst/st 12718 12719 12720 203177 12722 203178 203179 203180 203181 12727 213815 13880 206852 206853

sc/sc 203102 203103 206928 208829 203104 203208 203209 203210 105673 208728 203898 206074 206020 211756

sc/st 203096 207759 208485 207758 203099 203214 203215 203216 203217 203100 209339 203218 209325 206558

mtrj/mtrj 203224 203225 203226 209277 203227 209278 209279 209281 209282 203228 213805 209284 209285 213806

mt-rj/st 203229 203230 203231 208867 203232 208996 208868 208869 209324 203233 213830 206366 205239 213831

mt-rj/sc 203234 203235 203236 209243 203237 209320 206752 206044 209321 203238 212472 209322 209323 213809

mt-rj/lc 210182 208777 210183 215359 208778 215364 215365 215360 215361 214785 215362 215366 214932 215363

lc/sc 210573 210574 210521 210576 210579 210587 210588 208027 210589 205456 208370 210596 210597 212792

lc/st 208780 208630 208779 210654 210655 210656 210658 210662 210666 210669 214040 210673 210674 214041

lc/lc 210096 210097 210098 210099 210100 210101 210102 210103 210104 210105 214038 210106 210107 214039

Premise FiberCABLExpress® brand fiber jumpers are 100% optically tested and factory terminated for superior performance. They meet or exceed industry standards for return loss and reflectance. Our fiber jumpers carry a limited lifetime replacement warranty. We stock a variety of multimode and singlemode lengths and connector styles ready to ship directly to you. Custom assemblies are also available. If you don't see what you need, call our experienced sales force to assist in meeting your requirements.

PREMISE 50/125 MULTIMODE STOCKED RISER JUMPERS


sc/sc 208611 205501 207503 213961 213962 207504 208918 213963 213964 204072 213965 208920 213893 207357

sc/st 213970 207804 211161 213971 213972 212590 210966 213973 213974 213975 213976 213977 209075 213978

mtrj/mtrj 214010 213997 212659 214011 209262 214012 214013 214014 214015 214016 214017 214018 214019 215545

mt-rj/st 213998 213999 211162 214000 214001 214002 214003 214004 214005 214006 214007 214008 214009 215544

mt-rj/sc 214020 214021 212658 214022 214024 214025 214026 214027 214028 214029 214030 214031 214032 215543

mt-rj/lc 215375 215376 215377 215381 215382 215384 215385 215386 215387 215388 215389 215390 215391 215392

lc/sc 210605 210606 210608 210311 210609 210610 210611 210612 210613 210615 211133 210616 210617 211154

lc/st 210657 210659 210660 210661 210663 210664 210665 210667 210668 210670 214023 210671 210672 215542

lc/lc 210557 210568 210569 210570 210575 210577 210578 210581 210582 210583 213715 210584 210585 214947


Fiber Cables & Connectors

PREMISE 9/125 SINGLEMODE STOCKED RISER JUMPERS


sc/sc 212976 212977 212978 212979 212980 209055 210290 205573 213979 212981 206275 210697 213980 212471

sc/st 212939 212940 212941 212942 212943 214034 210223 210798 208962 212944 211936 212802 214206 206689

mt-rj/lc 215414 215415 215416 215418 215420 215421 215422 215423 215424 215425 215426 215427 215428 215429

lc/sc 213289 213290 213291 213292 213293 212610 210963 206128 206129 213294 210264 211333 211375 custom

lc/st 213276 213277 213278 213279 213280 213281 210258 214225 214226 214042 214227 211334 214228 220549

lc/lc 213339 213340 213341 213342 213343 207655 37426 210381 210259 213344 211564 214216 214217 custom

• CXtec can build the jumpers to your exact requirements• 1 to 3 Day lead time for most custom orders• Call for more Information

Need custom lengths?• Each cable individually tested for optimal performance• Wide assortment of connector styles in stock lengths available for immediate shipment

• Single and multimode cables available

30

ENTERPRISE 62.5/125 MULTIMODE STOCKED RISER JUMPERS


sc/sc 33362 33363 33364 48586 33365 209125 48587 203198 201640 33770 213812 82796 209126 N/A

sc/st 33366 33367 33368 48670 33369 201575 48671 205529 200796 33771 213911 209136 209332 213912

mt-rj/sc 32261 32262 32263 209244 33775 201574 106110 209127 209330 33776 213810 208896 209331 213811

lc/sc 37522 37523 224519 234020 234021 N/A 237598 234024 234022 224520 234019 234023 233555 207726

lc/st 37592 37593 37594 234025 37595 234026 218300 234036 N/A 234027 N/A 234028 234034 234035

lc/lc 37442 234039 37444 237575 37445 237581 226726 234042 237585 37446 237600 217558 217559 229284

Enterprise FiberCXtec offers Enterprise fiber cables assembled in accordance with IBM standards. Our standard Enterprise product line meets and exceeds the industry’s most stringent requirements for TIA 942 data center solutions, with cabling products designed specifically for the mainframe and high-end SAN switching environments. This provides the right balance of system density and installation robustness for mission-critical data sites. These cabling products are designed specifically for high-speed, high-reliability Ethernet, Fibre Channel or Infiniband applications transmitting from 1Gbps to more than 30Gbps. All cables are built in manufacturing plants that are approved by IBM and are PPQP (Product, Process, Quality, Plan) Certified.


ENTERPRISE 50/125 MULTIMODE STOCKED RISER JUMPERS

1m 2m 3m 4m 5m 6m 7m 8m 9m 10m 12m 15m 20m 30mmt-rj/st 37322 37323 N/A 234005 37325 234006 233991 233992 234003 37326 N/A N/A 234498 N/A

lc/sc 37502 37503 37504 228613 37505 219383 209827 219220 221980 37506 228614 211962 209001 220617

lc/lc 226186 37433 73434 216296 37435 221982 223965 218578 223966 220927 218545 211966 220939 214947


ENTERPRISE 9/125 SINGLEMODE STOCKED RISER JUMPERS

1m 2m 3m 4m 5m 6m 7m 8m 9m 10m 12m 15m 20m 30mst/st 234040 234044 234046 N/A 234047 N/A 234049 234050 N/A N/A N/A 234041 234497 N/A

sc/sc 234015 37098 37099 234033 226125 217362 N/A 234037 N/A 37101 N/A 226043 48535 N/A

sc/st 234013 234014 234016 234017 234031 233995 N/A 234007 234008 37181 234009 234011 233990 233994

lc/sc 224369 37483 37484 N/A 37485 N/A N/A 234010 N/A 37486 219802 229319 234012 N/A

lc/st 37572 37573 37574 234043 234045 234048 N/A N/A N/A 234052 N/A 234054 37576 N/A

lc/lc 37422 37423 37424 216320 37425 218017 215884 219130 225901 216778 221434 229316 221504 235699

• Each cable individually tested for optimal performance

• Wide assortment of connector styles in stock lengths available for immediate shipment

• Single and multimode cables available• 1 to 3 day lead time for most custom orders

ENTERPRISE 10-GIG AQUA SINGLEMODE STOCKED RISER JUMPERS

1m 2m 3m 4m 5m 6m 7m 8m 9m 10m 12m 15m 20m 30mlc/sc 229110 228606 223858 228607 222074 237238 229628 237246 231164 229630 N/A 229631 223859 223861

lc/lc 227632 229548 227633 232940 227634 230677 233176 230678 233177 225652 225653 230305 225992 225993

32

SC to 62.5/125 ST RISER CABLE

These singlemode SC to 62.5/125 multimode ST mode conditioning riser cables are fitted with a 2.5mm zirconia ceramic ferrule with a UPC end polish. Features a durable plastic body housing and a push/pull-style con-nector. Additional connector styles also available.

Mode conditioning cables are designed to eliminate differential mode delay (DMD) which can occur when a singlemode signal is launched into a multimode fiber. Mode conditioning patch cords are especially suitable for applications where new Gigabit 1000 Base-LX routers or switches are being deployed into existing multimode plants. Mode conditioning cables are used where transmission distances are greater than 300 meters. Applications include equipment interconnection, high-speed data transfer, telecom networks, security connections and testing.

Part # Length 106002 1M105663 2M106003 3M120106 5M200727 10M216327 13M224171 16M

ST to 62.5/125 ST RISER CABLE

Bayonet locking ST connector with a 2.5mm zirconia ceramic ferrule. Features UPC end polish and a durable plastic body. Additional connectors available.

Part # Length 212452 1M214057 2M205781 3M

SINGLEMODE TO MULTIMODE

MULTIMODE TO MULTIMODE

SC to 62.5/125 SC RISER CABLE

Features UPC end polish with a bayonet locking connector. Additional connector styles also available.

Part # Length 207395 1M35801 2M204098 5M 212807 6M207397 20M

SINGLEMODE TO MULTIMODE

Mode Conditioning Cables

Mode Conditioning

Let us help with your fiber planning and mode conversion.



When upgrading equipment, one common problem is that different equipment uses different fiber connectors. There are many cases where it is very expensive to replace a long fiber run because of these changing connectors or because the fiber cables are either buried underground or embedded between walls. One inexpensive way to solve this problem is by using conversion kits. These are often short fiber runs which ultimately change the connection style of the fiber to fit with the new connection interface.

Conversion Kits

Call us to discuss building conversion kits to your exact specifications!

ESCON® TO MT-RJDuplex MT-RJ male to ST, 62.5µm fiber with ESCON to ST coupler

LC TO SCDuplex LC to (2) ST, 62.5µm fiber with duplex-ST to SC MM coupler Duplex LC to (2) ST, 50µm fiber with duplex-ST to SC MM coupler Duplex LC to (2) ST, 9.0µm fiber with duplex-ST to SC SM coupler

SC to LCDuplex SC to duplex LC, 62.5µm fiber with LC-LC MM couplerDuplex SC to duplex LC, 50µm fiber 8in with LC-LC MM couplerDuplex SC to duplex LC, 9.0µm fiber with LC-LC SM coupler

OTHER CONVERSION KITSDuplex SC to (2) ST, 62.5µm fiber with ST to ESCON MM couplerDuplex LC to (2) ST, 62.5µm fiber with ST to ESCON MM couplerDuplex SC to (2) MT-RJ male, 62.5µm fiber with MT-RJ MM couplerDuplex LC to (2) MT-RJ male, 62.5µm fiber with MT-RJ MM couplerDuplex SC to (2) ST, 9.0µm fiber with ST to ESCON coupler

3�

Call your account representative

about the RapidNet® product line and how

it can benefit you!

A Revolution in Network Cabling

As a global manufacturer of network cabling solutions, HellermannTyton® has always been at the forefront of technological advancement within the industry. Continuously leading by example, HellermannTyton designs, develops and manufactures connectivity products and complete system solutions which meet or exceed international industry performance standards. However, performance is not the only issue for installers and their customers. Many mission-critical data center installations are conducted on weekends or evenings to minimize network downtime or disruption to a customer’s business. Even on new building installations, network cabling installers may face strict access and deadline pressures. In addition, the installation company may not have the required staff to meet a project deadline. HellermannTyton has developed RapidNet for these time-critical installations.

What is RapidNet?

RapidNet is a pre-terminated “plug and play” system which does not require on-site termination or certification testing. This dramatically reduces installation time by up to 75%. Even though installations are completed in record time, quality and performance are never compromised because each individual link is terminated and tested by HellermannTyton before delivery to the site.

A Revolution

Applications:• Mission-Critical Data Centers• Central Offices• CATV Headends• Enterprise Data Centers• Disaster Recovery• Redundancy Planning• Temporary Networks

RapidNetInstaller Benefits:• Fewer technicians required• More projects completed with

the same workforce• Factory terminated and 100%

tested

End-User Benefits:• 75% reduction in installation time• Quality controlled and 100%

factory tested• Security• Ability to make easy cabling

additions in-house• 25-Year System Warranty

FIBER ENCLOSUREHellermannTyton fiber enclosures are recommended for use on the connector end of RapidNet fiber cassette-to-connector assemblies.

MODULAR PANELSAll RapidNet cassettes utilize our patented latch design to allow quick and easy installation into modular patch panels. The 1U RapidNet modular patch panel accepts four cassettes, and the 2U modular patch panel accepts eight cassettes. Panels fit standard 19” racks.


Pre-Terminated

CAT6 COPPER RAPIDNET UTP SOLUTIONSRapidNet Category 6 is an ideal solution for high-performance cabling requirements, such as Gigabit Ethernet. RapidNet utilizes a bundled cable with six high-performance Category 6 UTP cables bound together with a Kevlar® binder. Cut to the customer-specified length at HellermannTyton, each 6-port loom is supplied terminated at both ends to HellermannTyton’s patented RapidNet cassettes and is shipped on proprietary plastic cable reels. Each pre-labeled 6-port cassette snaps easily into the modular panel. Removal of the cassette is just as easy; simply slide the latch forward and the cassette easily comes out of the rear of the panel.

FIBER RAPIDNET UTP SOLUTIONSRapidNet Fiber is an excellent solution for extremely high bandwidth needs or extended distances. RapidNet Fiber utilizes the LC connector with a 12-fiber single unit plenum (OFNP) cable and utilizes the SC connector with a 6-fiber single unit plenum (OFNP) cable. Cut to the customer-specified length at HellermannTyton, each 12-fiber or 6-fiber link is supplied terminated at both ends to HellermannTyton’s patented RapidNet cassettes and is shipped on proprietary plastic cable reels. Each pre-labeled 12-fiber or 6-fiber cassette snaps easily into the modular panel. Removal of the cassette is just as easy; simply slide the latch forward and the cassette easily comes out of the rear of the panel.

Product Features• Positive PSACR over 350MHz and a typical worst-case margin

of 15dB at 250MHz• Bundled cable is UL Verified to Category 6, TIA/EIA-568.B.2-1

specifications• Certification test reports included with all links• 1U modular panel accepts 4 RapidNet cassettes for 24-ports• 2U modular panel accepts 8 RapidNet cassettes for 48-ports• Available in lengths from 10 to 295 ft.

Product Features• Exceeds TIA/EIA-568-B and IEEE 802.3ae 10GbE standards• Modular panel accepts 4 RapidNet cassettes, allowing up to

48 fibers in 1U• Certification test reports included with all fiber links• Cassette-to-connector option is provided with pulling eye

preinstalled on connector end• Standard part number is wired straight through (A-A). To

order crossover (A-B), add “REV” to part number

Fiber Options• 62.5/125μm (OM1 Fiber)• 50/125μm (OM2 Fiber)• 50/125μm laser optimized 10G (OM3 Fiber)• Single mode

36

Fiber trunking is used for easier cable management and cable pulling. Fiber trunks combine the bandwidth capacity of several individual cable assemblies into a single, convenient assembly that is easy to use and install. These are traditionally used in backbone, premise distribution and interconnect applications which require multiple fibers to be routed together from one point. Available with custom connectors, lengths and breakouts. Other applications include outside plant, aerial distribution and communications closets.

Fiber Trunking

SINGLEMODE (9/125)You can stop looking for a better way to terminate your trunks. Our termination trunks are are built with a pulling eye to make installation as easy as possible. Four different connector types available.

MULTIMODE (62.5/125 – 50/125)Terminate your multimode fiber with our terminated trunks. Avail-able in 14 different connector types, we can terminate any fiber cable you have. Our termination trunks are serialized for easy cable management and possess a pulling eye for easy installation.

DATAPIPE ULTRA-SMALL FORM FACTORUltra-Small Form Factor series of trunks for MTP solutions offer improved flexibility and minimum bend radius over current MIC and central tube ribbon designs. Has a coated-fiber, central tube design that is extremely lightweight and small in diameter (less than 9mm) making installation and management easier than ever.Datapipe has several benefits over central tube ribbon, while both are used for the same applications. First of all, datapipe is more robust and is much less likely to be damaged while being pulled during installation. Secondly, datapipe is only 1/3 the diameter of central tube ribbon. This facilitates better cable management with far less underfloor congestion. It also increases airflow, resulting in more efficient cooling measures and decreased environmental costs. Plus, it’s smaller and more lightweight, meaning fewer bulky spools and lower shipping costs.

MTP(F)/APC - MTP(F)/APCMTP(F)/APC - SC

ESCON® - ESCONESCON - STESCON - MT-RJ(F)ESCON - MTP(F)MTP(F) - MTP(F)

MTP(F) - STMTP(F) - SCMTP(F) - MT-RJ(F)MT-RJ(F) - MT-RJ(F)LC - LC

LC - STSC - SCSC - STST – ST

MTP(F)/APC - MTP(F)/APC MTP(F) - MTP(F)

SC - SCLC – LC


ADAPTERS & COUPLERS

Part # Photo Description30630 C Multimode ESCON/ESCON adapter219974 D Duplex singlemode/multimode SC/SC adapter215079 E MTP/MTP coupler31912 F Multimode ESCON/ST adapter panel mount222809 G Duplex singlemode/multimode SC/ST adapter11919 H Duplex singlemode/multimode ST/ST adapter202156 I Duplex singlemode/multimode LC/LC coupler35844 J Duplex MT-RJ/MT-RJ coupler


HARNESSESEnable a trunk cable with MTP (female) connectors to connect to fiber optic ports. Come in standard lengths of 3, 5, 8 and 12 feet. Available in multimode and singlemode.

12 fiber MTP(M)/ESCON DFX 62.5µm/125 direct attach harness12 fiber MTP(M)/duplex SC 2.0mm zip 50µm/125 direct attach harness 12 fiber MTP/ATP(M)/duplex LC 2.0mm zip 9µm/125 direct attach harness 12 fiber MTP(M)/duplex LC 2.0mm zip 50µm/125 direct attach harness 12 fiber MTP/APC(M)/duplex LC 2.0mm zip 9µm/125 direct attach harness 12 fiber MTP(M)/MT-RJ(F) DFX 62.5µm/125 direct attach harness

LC BOOT CONNECTORSOur Uni-Boot series of LC connectors come in a variety of connector types, including LC-LC, LC-ESCON and LC-MTRJ jumpers; manufactured with 2.8mm DFX-style round 2-fiber cable. In most cases a small, universally flexible cable fits the needs of a project much better than traditional fiber cables.

Standard Duplex LC. Within standard LC cables, two fibers are running to the two different LC connectors.

Uni-Boot Duplex LC. Uni-Boot cables allow two fibers to run through one cable, therefore having one visible cable connect to the two different adapters (See Photo A).

Density Max Duplex LC. Connectors that will allow you to disconnect your LC cables without having to squeeze into a tight space. Perfect for those working with high-density LC patch panels (See Photo B).

A

B

C D E

F G H

I J

38

1U 12 TO 48 PORTSThis 1U enclosure comes fully loaded with straight-through horizontal couplers or pre-wired harnesses. With this ready-to-plug-in enclosure, space will no lon-ger be a problem. Mounts to any 19-inch rack or cabinet with optional brackets available for 23- and 24-inch mounting. Available in single faceplate design only.

EnclosuresOur fiber enclosures can be configured to your exact needs, and they come fully loaded with the couplers of your choice. Our enclosures are available in sizes ranging from 1U to 9U and will mount into any 19-inch rack. Durable metal bodies provide protection for cables while the connectors provide for ultra-strain relief. MTP Modules are available. Couplers can come in any connector type; call your salesperson for more information.

2U 6 TO 48 PORTSThis 2U enclosure can be configured to your exact needs and will ship to you fully loaded with horizontally mounted couplers. Mounts to any 19-inch rack or cabinet. This enclosure can be assembled in 6-port faceplate and modular cassette designs.

4U 36 TO 72 PORTSThis 4U enclosure can ship fully or partially loaded with couplers or cassette modules. Its 6-port modular design allows for ease in growth, upgrades and changes. Easily mounts to 19-, 23- and 24-inch racks or cabinets. Available in single faceplate design or vertical modular design.

6U 72 TO 144 PORTSOur 6U fiber patch panel can meet the needs of the most ambitious project. Can ship fully or partially loaded with horizontal mounted cassettes. Modular design allows for ease in upgrades and changes. Mounts to any 19-, 23- or 24-inch rack or cabinet. Available in modular and single-hinged faceplate design.

9U 256 PORTSThis high-density 9U fiber enclosure will ship fully loaded with LC couplers. Enables you to maximize the space within your rack or cabinet. Mounts to any 19-, 23- or 24-inch rack or cabinet. Available in single hinged faceplate design only.


Fiber Enclosures

RACK MOUNT FIBER OPTIC ENCLOSURESOur rack-mount patch enclosures are designed for direct termination of up to 144 fibers. These units accommodate up to 12 modular panels and are equipped with routing guides to limit bend radius and enhance strain-relief control. The heavy-duty metal body provides excellent protection for the inside fibers. A large variety of connector adapters, MTP module cassettes and module preassemblies are available for easy fiber installation and management.

Part # Description 221457 Fiber Optic Rack-Mount Enclosure

WALL MOUNT FIBER OPTIC ENCLOSURESOur wall-mount patch enclosures are designed for direct termina-tion of up to 96 fibers. These units accommodate up to 8 modular panels and are equipped with routing guides to limit bend radius and enhance strain-relief control. The 16-gauge steel has a corrosion-resistant finish coat for excellent protection. This enclosure can ship already configured with terminations. A large variety of connector adapters are offered to meet your specific requirements.

Part # Description 221682 Fiber Optic Rack-Mount Enclosure

PRE-LOADED ADAPTER PANELSWe now offer a full line of adapters and adapter panels designed for rack-mount and wall-mount enclosures, as well as adapter panels that are compatible with patch panels from most manufacturers including Lucent, Corning, Leviton and Superior. Please call for a complete list of products.

Part # Photo Description 221470 A Blank Filler Insert226766 B 6-Port SM/MM Duplex LC Adapter Panel221466 C 6-Port SM/MM SC Adapter Panel228556 D 6-Port SM/MM ST Adapter Panel241332 E 6-Port 50/125 10Gig Aqua MM Duplex SC Adapter Panel

A B C D E

�0

JUMPERS 10-GIGABIT FIBERThese new 10-gigabit fiber jumpers reduce impurities that hinder performance because these cables are laser bandwidth optimized. Meeting or exceeding EIA/TIA standards, 10-gigabit fiber cables are sure to be the solution for all your next generation fiber needs.

1m 2m 3m 4m 5m 6m 7m 8m 9m 10m 12m 15m 20m 30mlc/lc 227632 229548 227633 232940 227634 230677 233176 230678 233177 225652 225653 230305 225992 225993

lc/sc 229110 228606 223858 228607 222074 228607 229628 237246 231164 229630 N/A 229631 223859 223861

TRUNKS 10-GIGABIT FIBER

ENCLOSURES 10-GIGABIT FIBER

10-Gig FiberThe emerging standard for 10-gigabit Ethernet requires serial transmission for 300 meters of 50/125 glass. CXtec is pleased to offer cable assemblies using the latest in laser-ready glass, suitable for the 10-gigabit Ethernet standard.

CXtec offers 10-gigabit fiber cabling assembled in accordance with IBM standards. Our cabling is built in IBM-approved manufacturing plants and is PPQP (Product, Process, Quality Plan) Certified.

This new technology provides nearly three times more bandwidth than multimode fiber cables, as well as a much lower cost than singlemode fiber cables. Providing for decreased power consumption, as well as requiring less maintenance, these cables will allow you to save a lot of capital when upgrading for infrastructure. 10-gigabit fiber cables will also make your infrastructure much easier to upgrade for future projects.

HARNESSES 10-GIGABIT FIBERConnect your MTP cables to your fiber optic ports within a 10-gigabit environment. The time to upgrade your backbone cabling to future-proof your system is right now!

12-fiber MTP(M)/ESCON DFX 62.5/125 12-fiber MTP(M)/duplex SC 2.0mm zip 50/12512-fiber MTP/ATP(M)/duplex LC 2.0mm zip 9/125 12-fiber MTP(M)/duplex LC 2.0mm zip 50/125 12-fiber MTP/APC(M)/duplex LC 2.0mm zip 9/125 12-fiber MTP(M)/MT-RJ(F) DFX 62.5/125


Attenuation Bandwidth Laser1-Gb Link LengthLaser

10-Gb Link Lenth

(dB/km) (MHz-km) (Meters) (Meters)@850nm @1300nm @850nm @1300nm @850nm @1300nm @850nm @1300nm

Standard Multimode 62.5/125 3.5 1.2 200 600 300 550 35

N/AStandard Multimode 50/125 3.5 1.2 500 500 600 600 82

Giga Link 2000 50/125 3.5 1.2 500 800 750 2000 110

10-Gigabit Fiber 50/125 3.5 1.2 1500 500 900 550 300

10-Gigabit Fiber Products

Converting to 10-gigabit can be a phased implementation that will result in improvements after each implementation. Adding 10-gigabit fiber to your existing infrastructure will increase the allowable distance from transmitter to receiver, which will save money as well as increase productivity.

10-Gigabit Ethernet Link Distance (transmitter to receiver)

100% 10-gigabit fiber (aqua)

300 meters

80% 10-gigabit fiber 20% Standard

283 meters

90% 10-gigabit fiber10% Standard

256 meters

100% Standard(orange)

82 meters

TRUNKS 10-GIGABIT FIBERAvailable in a variety of connector types, these new 10-gigabit fiber cables will allow you to terminate your trunks within a 10-gigabit environment.

ESCON® - ESCONESCON - STESCON - MT-RJ(F)ESCON - MTP(F)MTP(F) - MTP(F)

MTP(F) - STMTP(F) - SCMTP(F) - MT-RJ(F)MT-RJ(F) - MT-RJ(F)LC - LC

LC - STSC - SCSC - STST - STMTP(F)/APC - MTP(F)/APCMTP(F)/APC - SCLC - MTP/APC(F)

Designed to fit in any 19- and 23-inch rack space, our 10-gigabit patch panels and enclosures meet or exceed the design criteria established by leading OEMs and offer a high-density solution to 10-gigabit infrastructure implementations. With

many different options to choose from, including custom enclosures, CXtec can meet any requirements for your 10-gigabit environment.

ENCLOSURES 10-GIGABIT FIBER

OPTICAL FIBER

PerfomanceCharacteristics

Converting to 10-Gig

�2

ES-SERIES SERVER ENCLOSURESThe newest addition to the Great Lakes product line, this server rack has infinitely adjustable rails that can accept "server specific" side mounting adapters for HP®, Compaq™ and Sun®. This means you can mount multi-vendor servers all in the same rack. Adapters required for IBM® or Dell®.

Additional Features and Benefits

• Two sizes _ 24-inch W x 42-inch D or 29-inch W x 42-inch D

• Weight Capacity: 1800 lbs. on casters

• 180° door swing, lift-off, and reversible

• Adjustable rails allow for various equipment depths

• Comes with three pairs of rails for equipment mounting

• Generous cable access

• Retractable anti-tip legs (optional)

215290

www.werackyourworld.com

Cabinets & RacksCXtec is proud to offer a full line of rack and cabinet options that will lengthen the life of your critical computer hardware. These options are designed to enhance the performance of your hardware while ensuring that the hardware is protected.

• Doors• Side panels• Cable Management• Sliding and stationary for 19-inch mounting • Fan trays, cooling equipment and power outlet strips • Removable top panels • Side mount adapter brackets (specify your server) • Casters, levelers and mounting rails

CABLE TIES VELCRO®Organize cables inside posts, floors and walls with the convenience of Velcro. Leaving cables loose can make it difficult to track them and make them vulnerable to damage. Cablehangers will protect your cables against crimping or accidental cutting while locking firmly onto floor posts or other support elements. Each features a Velcro tie with handy pull tab. Available in a variety of colors and sizes for easy cable-group identification or tracking.


Cabinets & Racks

Need help with configuration?

Call us with your specifications!

The S2 Sound & Security enclosures series is designed for the broadcast, video, audio, security, network and communications industries. Available in two sizes:

• 24-inch W x 32-inch D

• 24-inch W x 36-inch D

E-SERIES ENHANCED SERVER ENCLOSURES

Configuration Options:Enhanced Series

• 19-, 23- or 24-inch rack mount • Ships completely configured• 1 to 2 days shipping time

We offer a variety of Great Lakes enclosures for data and telecommunication equipment, computer control rooms, LAN equipment and file server workstations. We offer great flexibility to our customers with a wide choice of component configurations.

Enhanced Series Enclosure Features• Locking, lift-off side panels with finger release latch• Field reversible front and rear doors• Grounding studs on doors, side panels and base unit• Provisions for power outlet strips in all four corners• Optional vertical cable management with hinged cover• Fully adjustable mounting rails• Choose from three standard top panels: solid, louvered or with fan assembly• Standard horizontal cable management front to back, for mounting on 29-inch enclosures

Improvements to the E-Series • Rails as cable management w/cable-tie locations • New bottom • Easy mounting and infinitely adjustable rails • RMU marks on rails • Built to hold more weight • Anti-tip option • Lacing bars vertical/horizontal • Networking through side • Universal rails powder coated217066

Enhanced Series Enclosure Benefits• Flexible modular concept• Easily adapts to equipment upgrades• Durable construction• Pre-assembled to your configuration

S2 SOUND & SECURITY

��

WS-SERIES WALL MOUNT SERVER ENCLOSURESWS Series of wall mount/swing out enclosures provide 19-inch rack mounting in a heavy-duty distribution enclosure. This durable enclosure features a center swing out section for outstanding front and rear access to cables and equipment. A simple finger pull/latch mechanism located inside the enclosure opens the 18.375-inch deep center swing section. Comes in Nitro Blue, White and Black. Available in 24-, 36-, 48-, 36-, 48- and 72-inch heights and with various door options.

Wall Mount Enclosures• More vertical rack space• EIA spacing with 12 to 24 threaded holes

per EIA/TIA 310-D, package of screws included

• "Stay-open" hinge pins = provisions for optional cable

Documents

Connectivity Guide - CXtec Inc., · 2008. 9. 9. · 2 cat5e (non-booted) patch cable 1 3 5 7 10 1 25 50 100 black 33805 33812 33819 33815 33822 33825 33828 33831 33839 blue 33804