Upload
others
View
17
Download
3
Embed Size (px)
Citation preview
© 2012 TEAM Oil Tools. All rights reserved.
On Common Ground
www.teamoiltools.com
Completion Tools Catalog
© 2012 TEAM Oil Tools. All rights reserved.
www.teamoiltools.com
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. 110212
TABLE OF CONTENTS
P/N Product descriPtioN Page P/N Product descriPtioN Page
retrievable Packers
123456789
1011
12-13141516171819202122232425262728
seal Bore Packers
T265T670T671T674T678T1125
TEAM PackTL Perma-Packer Bore PackerJL Perma-Packer Bore PackerHydro Perma-PakDB Perma-PakScorpion Packer
293031323334
tubing anchors
T312 T354
H/D Tubing Anchor Catcher RT Anchor Catcher
3536
accessories
T510T512T513T568T569T572T585T597T598
T-2 On/Off Tool StingerT-2 On/Off ConnectorT-2 Type “H” On/Off ToolRH Rotational Safety JointModel “K” Shear Safety JointTelescoping Swivel JointPBRPacker Tubing AccessoriesWireline Adaptor Kit
373839404142434445
T107T405T412T421T436T437T440T441T442T444T456T600T600T603T607T611T628T629T631T636T641T650T654T658T900T901T905
MCA ValveH Tension PackerSL Tension PackerGV-5 Gas Vent PackerC-1 Tandem Tension PackerS-1 Tandem Tension PackerCasing PackerWS Hanger PackerV.I.P. Gas Vent Packer SystemCS Compression PackerM-2 Shear Tension PackerASI-X Production Packer ASI-X 10k Production PackerASI-X HP Production PackerPatriot PackerASII Compression PackerAS-5 Anchor PackerAS-6 Anchor PackerAS-3 Single Grip PackerSnapset II Compression Isolation PackerCompression Isolation PackerHS-1 Hydraulic Prod. PackerHS-4 Isolation PackerHSR-4 Hydraulic Production PackerMSV Dual Compression PackerR-2 Dual String Tension PackerHS-II Hydraulic Set Dual String Packer
drillable tools
data charts
VIPER™ II Composite Bridge & Frac Plug
Elastomer Guide
46-47
48-49
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents 110112
M.C.A. Valve
The T107 MCA Valve is used with the T440 Casing Packer to cement liner strings into the well
bore or open hole. The casing packer is set in compression allowing the MCA Valve to shear
at a pre-determined value, opening the cementing ports. The cementing ports are closed by
straight pick up on the casing string.
features and benefits Available in premium thread connection on request.
Available with premium metallurgies for sour service.
No rotation required.
Torque transmitted through valve to set lower packer.
M.C.A. Valve
sizeInches (mm)
Max O.d.Inches (mm)
Min i.d.Inches (mm)
PrOduct nuMber
2.375 (60.33) 3.750 (95.25) 1.985 (50.42) T107-20A-000
4.500 (114.30) 5.500 (139.70) 3.985 (101.22) T107-45A-000
5.500 (139.70) 6.500 (165.10) 4.985 (126.62) T107-55A-000
1
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents 042412
H Tension Packer
The T405 H Tension Packer was designed for use in old scaly casing or open hole applications.
The T405 H Packers unique design features make it the packer of choice when producing or
injecting in old pipe or open hole applications. The standard packer comes with deep wide
wicker slips that allow penetration into scaly casing or open hole formations. The T405 H
Packer has three releasing methods built in the design, virtually eliminating retrieval problems.
features and benefits Open J-slot reduces debris build up
Safety tubing release
Wide wicker slips insure setting in scaly casing
Available in single or double element design
Automatic J-slot design for easy set and release
H Tension Packer
sizeInches (mm)
Casing Weightlbs/ft (kg/m)
Max O.d.Inches (mm)
Min i.d.Inches (mm)
PrOduCt nuMber
2.875 (73.00) 6.4-6.5 (9.5-9.7) 2.250 (57.15) 0.750 (19.10) T405-41A-000
3.500 (88.90) 7.7-10.2 (11.5-10.0) 3.781 (96.00) 1.500 (38.10) T405-45B-000
4.000 (101.60) 9.5-11.0 (14.1-16.4) 3.250 (82.55) 1.500 (38.10) T405-45A-000
4.000 (101.60) 9.5-11.0 (14.1-16.4) 3.250 (82.55) 1.875 (47.60) T405-50A-000
4.500 (114.30) 15.10-16.6 (22.5-24.7) 3.500 (88.90) 2.000 (50.80) T405-50B-000
4.500 (114.30) 9.5-13.5 (14.1-20.9) 3.750 (95.25) 2.000 (50.80) T405-55A-000
5.000 (127.00) 11.5-18.0 (17.1-26.8) 4.125 (104.78) 2.000 (50.80) T405-55B-000
5.000 (127.00) 18.0-20.8 (26.8-31.0) 4.000 (101.60) 2.000 (50.80) T405-56A-000
5.500 (139.70) 13.0-20.0 (19.3-29.8) 4.625 (117.40) 2.000 (50.80) T405-56B-000
5.500 (139.70) 20.0-23.0 (29.8-34.2) 4.500 (114.30) 2.000 (50.80) T405-60B-000
5.500 (139.70) 13.0-20.0 (19.3-29.8) 4.625 (117.40) 2.437 (61.90) T405-65A-000
5.500 (139.70) 20.0-23.0 (29.8-34.2) 4.500 (114.30) 2.437 (61.90) T405-65B-000
6.000 (152.40) 20.0-23.0 (29.8-34.2) 5.000 (127.00) 2.437 (61.90) T405-70A-000
6.625 (168.30) 20.0-24.0 (29.8-35.7) 5.750 (146.10) 2.437 (61.90) T405-73A-000
6.625 (168.30) 24.0-32.0 (35.7-47.6) 5.500 (139.70) 2.437 (61.90) T405-75A-000
7.000 (177.80) 17.0-29.0 (25.3-43.2) 6.000 (152.40) 2.437 (61.90) T405-85A-000
7.000 (177.80) 17.0-29.0 (25.3-43.2) 6.000 (152.40) 3.000 (76.20) T405-85B-000
7.625 (193.70) 20.0-29.7 (29.8-35.7) 6.625 (168.30) 2.437 (61.90) T405-95A-000
8.625 (219.10) 24.0-40.0 (35.7-59.5) 7.500 (190.50) 2.437 (61.90) T405-95B-000
8.625 (219.10) 20.0-24.0 (29.8-35.7) 7.875 (200,00) 2.437 (61.90) T405-96A-000
9.625 (244.50) 32.3-43.5 (48.0-64.7) 8.500 (215.90) 2.500 (63.50) T405-96B-000
9.625 (244.50) 43.5-53.5 (64.7-79.6) 8.250 (209.60) 2.500 (63.50) T405-97A-000
9.625 (244.50) 32.3-43.5 (48.0-64.7) 8.500 (215.90) 3.000 (76.20) T405-97B-000
9.625 (244.50) 43.5-53.5 (64.7-79.6) 8.250 (209.60) 3.000 (76.20) T405-10A-000
9.625 (244.50) 32.3-43.5 (48.0-64.7) 8.500 (215.90) 4.000 (101.60) T405-101A-000
9.625 (244.50) 43.5-53.5 (64.7-79.6) 8.250 (209.60) 4.000 (101.60) T405-102A-000
10.750 (273.10) 32.7-55.5 (48.6-82.6) 9.500 (241.30) 2.500 (63.50) T405-13A-000
10.750 (273.10) 32.7-55.5 (48.6-82.6) 9.500 (241.30) 3.000 (76.20) T405-101A-000
10.750 (273.10) 32.7-55.5 (48.6-82.6) 9.500 (241.30) 4.000 (101.60) T405-102A-000
10.750 (273.10) 48.0-72.0 (71.4-107.0) 12.000 (304.80) 4.000 (101.60) T405-13A-000
2
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents 041012
SL Tension Packer
The T412 SL Tension Packer is a dependable hook wall packer used for water injection and
production. The open J-slot and large stainless steel drag springs make the T412 SL ideal for
setting in heavily corroded casing. The T412 SL has a right hand rotational safety release built
into the top sub. This allows the tubing string to be removed from the packer when normal
release procedures fail.
features and benefits Open J-slot reduces debris build up
Safety tubing release
Wide wicker slips insure setting in scaly casing
Available in single or double element design
Automatic J-slot design for easy set and release
SL Tension Packer
sizeInches (mm)
Casing Weightlbs/ft (kg/m)
Max O.d.Inches (mm)
Min i.d.Inches (mm)
PrOduCt nuMber
2.875 (73.00) 6.4-6.5 (9.5-9.7) 2.250 (57.15) 0.750 (19.10) T412-41A-000
3.500 (88.90) 7.7-10.2 (11.5-10.0) 3.781 (96.00) 1.500 (38.10) T412-45B-000
4.000 (101.60) 9.5-11.0 (14.1-16.4) 3.250 (82.55) 1.500 (38.10) T412-45A-000
4.000 (101.60) 9.5-11.0 (14.1-16.4) 3.250 (82.55) 1.875 (47.60) T412-50A-000
4.500 (114.30) 15.10-16.6 (22.5-24.7) 3.500 (88.90) 2.000 (50.80) T412-50B-000
4.500 (114.30) 9.5-13.5 (14.1-20.9) 3.750 (95.25) 2.000 (50.80) T412-55A-000
5.000 (127.00) 11.5-18.0 (17.1-26.8) 4.125 (104.78) 2.000 (50.80) T412-55B-000
5.000 (127.00) 18.0-20.8 (26.8-31.0) 4.000 (101.60) 2.000 (50.80) T412-56A-000
5.500 (139.70) 13.0-20.0 (19.3-29.8) 4.625 (117.40) 2.000 (50.80) T412-56B-000
5.500 (139.70) 20.0-23.0 (29.8-34.2) 4.500 (114.30) 2.000 (50.80) T412-60B-000
5.500 (139.70) 13.0-20.0 (19.3-29.8) 4.625 (117.40) 2.437 (61.90) T412-65A-000
5.500 (139.70) 20.0-23.0 (29.8-34.2) 4.500 (114.30) 2.437 (61.90) T412-65B-000
6.000 (152.40) 20.0-23.0 (29.8-34.2) 5.000 (127.00) 2.437 (61.90) T412-70A-000
6.625 (168.30) 20.0-24.0 (29.8-35.7) 5.750 (146.10) 2.437 (61.90) T412-73A-000
6.625 (168.30) 24.0-32.0 (35.7-47.6) 5.500 (139.70) 2.437 (61.90) T412-75A-000
7.000 (177.80) 17.0-29.0 (25.3-43.2) 6.000 (152.40) 2.437 (61.90) T412-85A-000
7.000 (177.80) 17.0-29.0 (25.3-43.2) 6.000 (152.40) 3.000 (76.20) T412-85B-000
7.625 (193.70) 20.0-29.7 (29.8-35.7) 6.625 (168.30) 2.437 (61.90) T412-95A-000
8.625 (219.10) 24.0-40.0 (35.7-59.5) 7.500 (190.50) 2.437 (61.90) T412-95B-000
8.625 (219.10) 20.0-24.0 (29.8-35.7) 7.875 (200,00) 2.437 (61.90) T412-96A-000
9.625 (244.50) 32.3-43.5 (48.0-64.7) 8.500 (215.90) 2.500 (63.50) T412-96B-000
9.625 (244.50) 43.5-53.5 (64.7-79.6) 8.250 (209.60) 2.500 (63.50) T412-97A-000
9.625 (244.50) 32.3-43.5 (48.0-64.7) 8.500 (215.90) 3.000 (76.20) T412-97B-000
9.625 (244.50) 43.5-53.5 (64.7-79.6) 8.250 (209.60) 3.000 (76.20) T412-10A-000
9.625 (244.50) 32.3-43.5 (48.0-64.7) 8.500 (215.90) 4.000 (101.60) T412-101A-000
9.625 (244.50) 43.5-53.5 (64.7-79.6) 8.250 (209.60) 4.000 (101.60) T412-102A-000
10.750 (273.10) 32.7-55.5 (48.6-82.6) 9.500 (241.30) 2.500 (63.50) T412-13A-000
10.750 (273.10) 32.7-55.5 (48.6-82.6) 9.500 (241.30) 3.000 (76.20) T412-101A-000
10.750 (273.10) 32.7-55.5 (48.6-82.6) 9.500 (241.30) 4.000 (101.60) T412-102A-000
10.750 (273.10) 48.0-72.0 (71.4-107.0) 12.000 (304.80) 4.000 (101.60) T412-13A-000
3
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents 041012
GV-5 Gas Vent Packer
The T421 GV-5 Gas Vent Packer System was developed to isolate casing leaks in pumping or
injection wells. The GV-5 system can be used on pumping wells with the installation of a tubing
anchor catcher used below the packers or with a lower tension packer on injection wells to
allow for integrity pressure tests down to the lower packer. The system was designed as an
inexpensive alternative to squeeze cementing. The packer style venting system allows for a
positive seal against the casing wall where cup style systems fail to perform.
features and benefits Isolate Casing Leaks While Venting Gas From Below
Packer Style Makes for Positive Seal Against Casing Wall
Tension Set System
Allows M.I.T. Integrity Tests to Lower Packer
Retrievable and Resetable System
GV-5 Gas Vent packer
sizeInches (mm)
Max O.d.Inches (mm)
Min i.d.Inches (mm)
PrOduct nuMber
4.500 (114.30) 3.750 (95.25) 2.000 (50.80) T421-45A-000
5.000 (127.00) 4.000 (101.60) 2.000 (50.80) T421-50A-000
5.500 (139.70) 4.625 (117.48) 2.000 (50.80) T421-55A-000
7.000 (177.80) 6.000 (152.40) 2.500 (63.50) T421-70A-000
4
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents 120412
C-1 Tandem Tension Packer
The T436 C-1 Tandem Tension Packer is an economical, compact isolation packer. It can be
used to isolate casing holes or perforations as well as for multi-zone completions. It is used as
the upper packer or packers with a tension packer such as the ASI-X or SL Shear Packer used
as the lower packer. The C-1 packer may be run with or without the shear screws. If the packer
is run with the shear screws in place, set down weight is required to shear the screws before
the packer is moved into the set position.
features and benefits Full bore design.
Simple, economical packer for zone isolation.
Built in unloader
Standard design is left-hand set.
Available in right-hand set on request.
��Shear�value�field�adjustable.
T436 C-1 Tandem Tension Packer
sizeInches (mm)
Casing Weightlb/ft (kg/m)
Max O.d.Inches (mm)
Min i.d.Inches (mm)
PrOduCt nuMber
5.500 (139.70) 20.0-23.0 (29.8-34.2) 4.500 (114.30) 1.985 (50.42) T436-55A-000
5.500 (139.70) 15.0-20.0 (23.1-29.8) 4.625 (117.48) 1.985 (50.42) T436-55B-000
5.500 (139.70) 13.0-14.0 (19.3-20.8) 4.781 (121.44) 1.985 (50.42) T436-55C-000
5
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents 041012
S-1 Tandem Tension Packer
The T437 S-1 Tandem Packer is used as an isolation packer in multiple zone completions.
Setting: Unjayed position: Apply tension shearing the brass shear screw energizing the packing
element.
Jayed position: Set down weight shearing the brass shear screws, the rotate 1/8 right hand
turn at packer and pull tension to energize the packing element.
Releasing: Set down weight to remove applied tension and engage the unloader to Equalize
pressures, then rotate 1/8 left hand turn at the packer to re-engage into running jay position.
features and benefits Full bore design
Simple, economical packer for zone isolation
Built in unloader
�� Available�in�right�or�left�hand�J-slot�configurations
S-1 Tandem Tension Packer
sizeInches (mm)
Casing Weightlbs/ft (kg/m)
Max O.d.Inches (mm)
Min i.d.Inches (mm)
PrOduCt nuMber
4.500 (114.30) 9.5-13.5 (14.1-20.9) 3.750 (95.25) 2.000 (50.80) T437-45A-000
5.000 (127.00) 11.5-15.0 (17.1-22.3) 4.125 (104.78) 2.000 (50.80) T437-50A-000
5.000 (127.00) 18.0-20.8 (26.8-31.0) 4.000 (101.60) 2.000 (50.80) T437-50B-000
5.500 (139.70) 13.0-20.0 (19.3-29.8) 4.625 (117.48) 2.000 (50.80) T437-55A-000
5.500 (139.70) 20.0-23.0 (29.8-34.2) 4.500 (114.30) 2.000 (50.80) T437-55B-000
7.000 (177.80) 17.0-26.0 (25.3-38.7) 6.000 (152.40) 2.500 (63.50) T437-70B-000
7.000 (177.80) 26.0-32.0 (38.7-47.6) 5.875 (149.23) 2.500 (63.50) T437-70A-000
7.000 (177.80) 17.0-26.0 (25.3-38.7) 6.000 (152.40) 3.000 (76.20) T437-73B-000
7.000 (177.80) 26.0-32.0 (38.7-47.6) 5.875 (149.23) 3.000 (76.20) T437-73A-000
8.625 (219.10) 24.0-40.0 (35.7-59.5) 7.500 (190.50) 2.500 (63.50) T437-85A-000
8.625 (219.10) 24.0-40.0 (35.7-59.5) 7.500 (190.50) 3.000 (76.20) T437-86A-000
9.625 (244.50) 32.3-43.5 ( 38.1-64.7) 8.500 (215.90) 3.000 (76.20) T437-95B-000
9.625 (244.50) 40.0-53.5 (59.5-79.6) 8.250 (209.60) 3.000 (76.20) T437-95A-000
6
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents 100912
Casing Packer
The T440 Casing Packer is an economical full bore tension or compression packer used for
isolating bad areas of casing. The T440 Casing Packer is a versatile tool used for injection,
producing & cementing in liner strings. The T440 Casing Packer comes with deep wide wicker
slips, single or double element system making this packer ideal for setting in scaly pipe or open
hole formations. The T440 Casing Packer is available in either manual or automatic J-slot
configurations and is also available with a right hand rotational safety release when run as
tension set tool.
features and benefits Full bore design
Tension or compression set
Available with rotational safety release system
Available in single or double element design
Economical
Easily convertible into liner hanger system
Casing Packer
sizeInches (mm)
Casing Weightlbs/ft (kg/m)
Max O.d.Inches (mm)
Min i.d.Inches (mm)
PrOduCt nuMber
4.500 (114.30) 9.5-13.5 (14.1-20.9) 3.750 (95.25) 2.485 (63.12) T440-45A-000
5.000 (127.00) 11.5-15.0 (17.1-22.3) 4.125 (104.80) 2.485 (63.12) T440-50A-000
5.500 (139.70) 13.0-20.0 (19.3-29.8) 4.625 (117.40) 2.985 (75.82) T440-55A-000
5.500 (139.70) 13.0-20.0 (19.3-29.8) 4.625 (117.40) 3.485 (88.52) T440-56A-000
5.500 (139.70) 13.0-17.0 (19.3-25.3) 4.750 (120.65) 3.485 (88.52) T440-56B-000
6.625 (168.28) 20.0-28.0 (29.8-41.7) 5.625 (142.88) 3.985 (101.22) T440-65A-000
7.000 (177.80) 17.0-38.0 (25.3-56.5) 5.750 (146.00) 3.985 (101.22) T440-70A-000
7.000 (177.80) 26.0-32.0 (38.7-47.6) 5.875 (149.23) 4.485 (113.92) T440-73A-020
7.625 (193.70) 20.0-33.7 (29.8-50.2) 6.500 (165.10) 3.985 (101.22) T440-75A-001
8.625 (219.10) 24.0-40.0 (35.7-59.5) 7.500 (190.50) 3.985 (101.22) T440-84A-001
8.625 (219.10) 24.0-40.0 (35.7-59.5) 7.500 (190.50) 4.985 (126.62) T440-85A-000
9.625 (244.48) 43.5-53.5 (64.7-79.6) 8.250 (209.55) 6.485 (164.72) T440-94A-000
9.625 (244.48) 32.3-43.5 (48.1-64.7) 8.500 (215.90) 6.485 (164.72) T440-95A-000
11.750 (298.45) 42.0-60.0 (62.5-89.3) 10.500 (266.70) 7.985 (202.82) T440-11A-000
13.375 (346.08) 48.0-72.0 (71.4-107.1) 12.000 (304.80) 8.985 (228.22) T440-13A-000
7
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents 041012
WS Hanger Packer
The T441 WS Hanger Packer is a compression set liner hanger packer for use in open hole or
casing. The T441 WS Hanger uses deep wide wicker slips that penetrate in scaly casing and
open hole formations. The WS Hanger cone is shear pinned to eliminate premature setting of
the packing element while running, once the slips engage the cone the brass shear screws
break energizing the packing element. The T441 WS Hanger Packer is run in using the WS
Running Tool. The running tool comes with a two foot stroke allowing rotation at the hanger
without picking up on the casing string, this allows the right hand break thread to rotate free
and disconnect without damage..
features and benefits Simple operation
Deep wide wicker slips
Full opening
Stainless steel slip arms drag springs
Available in stainless steel construction
WS Hanger Packer
sizeInches (mm)
Casing Weightlbs/ft (kg/m)
Max O.d.Inches (mm)
Min i.d.Inches (mm)
PrOduCt nuMber
4.500 (114.30) 9.5-13.5 (14.1-20.9) 3.750 (95.25) 2.50 (63.50) T441-45A-000
5.000 (127.00) 11.5-15.0 (17.1-22.3) 4.125 (104.80) 2.50 (63.50) T441-50A-000
5.000 (127.00) 18.0-20.8 (26.8-31.0) 4.000 (101.60) 2.50 (63.50) T441-50B-000
5.500 (139.70) 13.0-20.0 (19.3-29.8) 4.625 (117.40) 3.00 (76.20) T441-55A-000
5.500 (139.70) 20.0-23.0 (29.8-34.2) 4.500 (114.30) 3.00 (76.20) T441-55B-000
5.500 (139.70) 13.0-15.5 (19.3-23.1) 4.781 (121.40) 3.50 (88.90) T441-56A-000
5.500 (139.70) 13.0-17.0 (19.3-25.3) 4.650 (118.10) 3.50 (88.90) T441-56B-000
7.000 (177.80) 17.0-38.0 (25.3-56.5) 5.750 (146.00) 4.00 (101.60) T441-70A-000
7.000 (177.80) 17.0-29.0 (25.3-56.5) 5.969 (151.60) 4.50 (114.30) T441-71B-000
7.000 (177.80) 17.0-23.0 (25.3-34.2) 6.187 (157.10) 5.00 (127.00) T441-72B-000
7.625 (193.70) 20.0-33.7 (29.8-50.2) 6.625 (168.30) 4.00 (101.60) T441-75A-000
7.625 (193.70) 20.0-33.7 (29.8-50.2) 6.625 (168.30) 5.00 (127.00) T441-76A-000
8.625 (219.10) 24.0-40.0 (35.7-59.5) 7.500 (190.50) 4.00 (101.60) T441-84A-000
8.625 (219.10) 24.0-40.0 (35.7-59.5) 7.500 (190.50) 5.00 (127.00) T441-85A-000
8.625 (219.10) 24.0-40.0 (35.7-59.5) 7.500 (190.50) 5.50 (139.70) T441-86A-000
8.625 (219.10) 32.3-43.5 (48.1-64.7) 7.656 (194.50) 6.50 (165.10) T441-87B-000
9.625 (244.50) 32.3-43.5 (48.1-64.7) 8.500 (215.90) 6.00 (152.40) T441-94A-000
9.625 (244.50) 40.0-53.5 (59.5-79.6) 8.250 (209.60) 6.00 (152.40) T441-94B-000
9.625 (244.50) 32.3-43.5 (48.1-64.7) 8.500 (215.90) 6.50 (165.10) T441-97A-000
9.625 (244.50) 40.0-53.5 (59.5-79.6) 8.250 (209.60) 6.50 (165.10) T441-97B-000
10.750 (273.10) 40.0-53.5 (59.5-79.6) 9.500 (215.90) 6.50 (165.10) T441-10A-000
10.750 (273.10) 40.0-53.5 (59.5-79.6) 9.500 (215.90) 7.00 (177.80) T441-101A-000
8
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents 100912
V.I.P Gas Vent Packer System
The T442 V.I.P. Packer is used in conjunction with the TEAM full bore T440 Casing Packer.
Together these tools create a unique packer system that are used to isolate bad areas of
casing while allowing gas to vent from below. The V.I.P. Packer System can be used in tension
or compression, but is ideally suited for pumping wells with the tubing string landed in tension.
features and benefits Full bore design allows maximum tubing size
Torque mechanism allows manipulation of packer system
Easily adjustable shear mechanism
No o-ring seals
Packing element design
V.I.P. Gas Vent Packer System
sizeInches (mm)
Casing Weightlbs/ft (kg/m)
Max O.d.Inches (mm)
Min i.d.Inches (mm)
PrOduCt nuMber
4.500 (114.30) 9.5-13.5 (14.1-20.9) 3.765 (95.63) 1.985 (50.42) T442-45A-000
5.500 (139.70) 13.0-20.0 (19.3-29.8) 4.625 (117.48) 1.985 (50.42) T442-55A-000
5.500 (139.70) 13.0-20.0 (19.3-29.8) 4.625 (117.48) 1.985 (50.42) T442-56A-000
7.000 (177.80) 17.0-38.0 (25.3-56.5) 5.750 (146.00) 2.485 (63.12) T442-70A-000
9
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents 041012
CS Compression Packer
The T444 CS Compression Packer is an inexpensive means of isolating the casing string from
the open hole formation or used with the T444 Casing Packer for zone isolation. The T444 is set
by applying sufficient weight to shear the setting screws energizing the packing elements.
features and benefits Large bore design
Double element design for open hole formations
Simple operation, economical
M-2 Shear Tension Packer
sizeInches (mm)
Casing Weightlbs/ft (kg/m)
Max O.d.Inches (mm)
Min i.d.Inches (mm)
PrOduCt nuMber
4.500 (114.30) 9.5-13.5 (14.1-20.1) 3.750 (95.25) 2.50 (63.50) T444-45A-000
5.000 (127.00) 11.5-15.0 (17.1-22.3) 4.125 (104.80) 2.50 (63.50) T444-50A-000
5.000 (127.00) 18.0-20.8 (26.8-31.0) 4.000 (101.60) 2.50 (63.50) T444-50B-000
5.500 (139.70) 13.0-20.0 (19.3-29.8) 4.625 (117.40) 3.00 (76.20) T444-55A-000
5.500 (139.70) 20.0-23.0 (29.8-34.2) 4.500 (114.30) 3.00 (76.20) T444-55B-000
5.500 (139.70) 13.0-15.5 (19.3-23.1) 4.781 (121.40) 3.50 (88.90) T444-56A-000
5.500 (139.70) 13.0-17.0 (19.3-25.3) 4.650 (118.10) 3.50 (88.90) T444-56B-000
7.000 (177.80) 17.0-38.0 (25.3-56.5) 5.750 (146.00) 4.00 (101.60) T444-70A-000
7.000 (177.80) 17.0-29.0 (25.3-43.2) 5.969 (151.60) 4.50 (114.30) T444-71B-000
7.000 (177.80) 17.0-23.0 (25.3-43.2) 6.187 (157.10) 5.00 (127.00) T444-72B-000
7.625 (193.70) 20.0-33.7 (29.8-50.2) 6.625 (168.30) 4.00 (101.60) T444-75A-000
7.625 (193.70) 20.0-33.7 (29.8-50.2) 6.625 (168.30) 5.00 (127.00) T444-76A-000
8.625 (219.10) 24.0-40.0 (35.7-59.5) 7.500 (190.50) 4.00 (101.60) T444-84A-000
8.625 (219.10) 24.0-40.0 (35.7-59.5) 7.500 (190.50) 5.00 (127.00) T444-85A-000
8.625 (219.10) 24.0-40.0 (35.7-59.5) 7.500 (190.50) 5.50 (139.70) T444-86A-000
8.625 (219.10) 32.3-43.5 (48.1-64.7) 7.656 (194.50) 6.50 (165.10) T444-87B-000
9.625 (244.50) 32.3-43.5 (48.1-64.7) 8.500 (215.90) 6.50 (165.10) T444-97A-000
9.625 (244.50) 40.0-53.5 (59.5-79.6) 8.250 (209.60) 6.50 (165.10) T444-97B-000
10.750 (273.10) 40.0-53.5 (59.5-79.6) 9.500 (241.30) 6.50 (165.10) T444-10A-000
10.750 (273.10) 40.0-53.5 (59.5-79.6) 9.500 (241.30) 7.00 (177.80) T444-101A-000
10
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents 041012
M-2 Shear Tension Packer
The T456 M-2 SHEAR TENSION PACKER is used for water injection testing and , pumping
wells. The M-2 design uses an external J-slot unlike most drag block tension packers that
use internal J-slots. The external J-slot is extremely durable and will accept torque without
damage, it also allows for increased cross- section of the mandrel for optimum wear. The top
and bottom connections of the M-2 Packers are interchangeable which allows the packer
to convert to compression set tool while maintaining a rotational safety release system. The
shear release mechanism use slotted brass screws that remain visible and are easily adjusted
in the field.
features and benefits External J-slot design for durability
Uses drag blocks for extended life
Interchangeable top and bottom connections allows tool to invert (tension or compression)
Automatic J-slot for easy release
Rotational safety release
Shear safety release
Uses common replacement parts
M-2 Shear Tension Packer
sizeInches (mm)
Casing Weightlbs/ft (kg/m)
Max O.d.Inches (mm)
Min i.d.Inches (mm)
PrOduCt nuMber
4.500 (114.30) 9.5-13.5 (14.1-20.1) 3.750 (95.25) 1.938 (49.20) T456-45A-000
5.000 (127.00) 11.5-15.0 (17.1-26.8) 4.125 (104.80) 1.938 (49.20) T456-45A-000
5.000 (127.00) 18.0-20.8 (26.8-31.0) 4.000 (101.60) 1.938 (49.20) T456-45A-000
5.500 (139.70) 14.0-20.0 (20.8-29.8) 4.625 (117.40) 1.938 (49.20) T456-55A-000
5.500 (139.70) 20.0-23.0 (29.8-34.2) 4.500 (114.30) 1.938 (49.20) T456-55B-000
5.500 (139.70) 14.0-20.0 (20.8-29.8) 4.650 (117.40) 2.375 (60.30) T456-56A-000
5.500 (139.70) 20.0-23.0 (29.8-34.2) 4.500 (114.30) 2.375 (60.30) T456-56A-000
7.000 (177.80) 17.0-26.0 (25.3-38.7) 6.000 (152.40) 2.500 (63.50) T456-70B-000
7.000 (177.80) 26.0-32.0 (38.7-47.6) 5.875 (149.20) 2.500 (63.50) T456-71A-000
7.000 (177.80) 17.0-26.0 (25.3-38.7) 6.000 (152.40) 3.000 (76.20) T456-73B-000
7.000 (177.80) 26.0-32.0 (38.7-47.6) 5.875 (149.20) 3.000 (76.20) T456-73A-000
8.625 (219.10) 24.0-40.0 (35.7-59.5) 7.500 (190.50) 2.500 (63.50) T456-85A-000
8.625 (219.10) 24.0-40.0 (35.7-59.5) 7.500 (190.50) 3.000 (76.20) T456-86A-000
9.625 (244.50) 32.3-43.5 (48.0-64.7) 8.500 (215.90) 2.500 (63.50) T456-95B-000
9.625 (244.50) 40.0-53.5 (59.5-79.6) 8.250 (209.60) 2.500 (63.50) T456-95A-000
9.625 (244.50) 32.3-43.5 (48.0-64.7) 8.500 (215.90) 3.000 (76.20) T456-96B-000
9.625 (244.50) 40.0-53.5 (59.5-79.6) 8.250 (209.60) 3.000 (76.20) T456-96A-000US PAT # 7,082,991
11
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents 041012
ASI-X Production Packer
The T600 ASI-X Production Packer is a high pressure double grip tubing retrievable packer.
It is normally set and retrieved using a ¼ turn to the right but it can be modified to be run
on electric wireline if preferred. It is designed to be run with the standard T-2 On-Off Tool
disconnect as the seal assembly and retrieving tool. This configuration uses less equipment
and trips than a conventional wireline set seal bore packer and allows it to be used in a variety
of applications from production packer to retrievable bridge plug. The release mechanism
incorporates an internal by-pass which opens to equalize pressure before the upper slips are
released from the casing wall by means of a sequential release system.
features and benefits The packer can be set in tension or compression depending on the application.
It can be modified to be run on electric wireline using standard setting tools.
It can also be supplied in a shear release configuration if needed.
Standard setting and releasing methods incorporate a ¼ turn to the right at the tool.
The internal by-pass equalizes pressure across the packer to reduce any tendency to swabbing.
Use of the T-2 disconnect feature eliminates the need for expensive seal assemblies.
Rated to 7,000psi at 300ºF with elevated temperature capabilities up to 425ºF with choice of appropriate elastomers.
US PAT # 7,082,991
12
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents 041012
ASI-X Production Packer
ASI-X Production Packer
sizeInches (mm)
Casing Weightlbs/ft (kg/m)
Max O.d.Inches (mm)
Min i.d.Inches (mm)
PrOduCt nuMber
2.500 (63.50) 6.4-6.5 (9.5-9.7) 2.250 (57.15) 0.868 (22.05) T603-25A-000
3.500 (88.90) 9.3-10.2 (13.8-15.2) 2.781 (70.64) 1.235 (31.37) T600-35A-000
4.500 (114.30) 13.5-15.1 (20.1-22.5) 3.656 (92.86) 1.922 (48.82) T600-45B-000
4.500 (114.30) 9.5-13.5 (14.1-20.1) 3.750 (95.25) 1.922 (48.82) T600-45A-000
5.000 (127.00) 18.0-20.8 (26.8-31.0) 4.000 (101.60) 1.922 (48.82) T600-50B-000
5.000 (127.00) 11.5-15.0 (17.1-22.3) 4.125 (104.78) 1.922 (48.82) T600-50A-000
5.500 (139.70) 20.0-23.0 (29.8-34.2) 4.500 (114.30) 1.985 (50.42) T600-55B-000
5.500 (139.70) 14.0-20.0 (20.8-29.8) 4.625 (117.48) 1.985 (50.42) T600-55A-000
5.500 (139.70) 13.0-14.0 (19.3-20.8) 4.781 (121.44) 1.985 (50.42) T600-55C-000
5.500 (139.70) 23.0-26.0 (34.2-38.7) 4.406 111.91) 2.360 (59.94) T600-56E-000
5.500 (139.70) 20.0-23.0 (29.8-34.2) 4.500 (114.30) 2.360 (59.94) T600-56B-000
5.500 (139.70) 15.5-20.0 (23.1-29.8) 4.625 (117.48) 2.360 (59.94) T600-56A-000
5.500 (139.70) 13.0-14.0 (19.3-20.8) 4.781 (121.44) 2.360 (59.94) T600-56C-000
6.000 (152.40) 14.0-20.0 (20.8-29.8) 5.188 (131.78) 2.360 (59.94) T600-60A-000
6.625 (168.28) 24.0-32.0 (35.7-47.6) 5.500 (139.70) 2.485 (63.12) T600-65A-000
6.625 (168.28) 17.0-24.0 (25.3-35.7) 5.750 (146.05) 2.485 (63.12) T600-65B-000
7.000 (177.80) 26.0-32.0 (38.7-47.6) 5.875 (149.23) 2.485 (63.12) T600-70A-000
7.000 (177.80) 23.0-29.0 (34.2-43.2) 5.969 (151.61) 2.485 (63.12) T600-70C-000
7.000 (177.80) 17.0-26.0 (25.3-38.7) 6.000 (152.40) 2.485 (63.12) T600-70B-000
7.000 (177.80) 26.0-32.0 (38.7-47.6) 5.875 (149.23) 2.985 (75.82) T600-73A-000
7.000 (177.80) 17.0-26.0 (25.3-38.7) 6.000 (152.40) 2.985 (75.82) T600-73B-000
7.625 (193.68) 33.7-39.0 (50.2-58.0) 6.453 (163.91) 2.485 (63.12) T600-75A-000
7.625 (193.68) 29.7-33.7 (44.2-50.2) 6.625 (168.28) 2.485 (63.12) T600-75B-000
7.625 (193.68) 20.0-24.0 (29.8-35.7) 6.672 (169.47) 2.485 (63.12) T600-75C-000
7.625 (193.68) 33.7-39.0 (50.2-58.0) 6.453 (163.91) 2.985 (75.82) T603-76A-000
7.625 (193.68) 24.0-29.7 (35.7-44.2) 6.625 (168.28) 2.985 (75.82) T603-76B-000
8.625 (219.08) 24.0-40.0 (35.7-59.5) 7.500 (190.50) 2.485 (63.12) T600-85A-000
8.625 (219.08) 24.0-32.0 (35.7-47.6) 7.750 (196.85) 2.485 (63.12) T600-85B-000
8.625 (219.08) 32.0-40.0 (47.6-59.5) 7.500 (190.50) 2.985 (75.82) T600-86A-010
8.625 (219.08) 32.0-40.0 (47.6-59.5) 7.500 (190.50) 3.985 (101.22) T600-87A-000
9.625 (244.48) 43.5-53.5 (64.7-79.6) 8.250 (209.55) 3.985 (101.22) T600-95A-000
9.625 (244.48) 32.3-43.5 (48.1-64.7) 8.500 (215.90) 3.985 (101.22) T600-95B-000US PAT # 7,082,991
13
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents 041012
ASI-X 10K Production Packer
The T600 ASI-X 10K Production Packer is a high pressure double grip tubing retrievable
packer. It is normally set and retrieved using a ¼ turn to the right but it can be modified to be
run on electric wireline if preferred. It is designed to be run with the standard T-2 On-Off Tool
disconnect as the seal assembly and retrieving tool. This configuration uses less equipment
and trips than a conventional wireline set seal bore packer and allows it to be used in a variety
of applications from production packer to retrievable bridge plug. The release mechanism
incorporates an internal by-pass which opens to equalize pressure before the upper slips are
released from the casing wall by means of a sequential release system.
features and benefits The packer can be set in tension or compression depending on the application.
It can be modified to be run on electric wireline using standard setting tools.
It can also be supplied in a shear release configuration if needed.
Standard setting and releasing methods incorporate a ¼ turn to the right at the tool.
The internal by-pass equalizes pressure across the packer to reduce any tendency to swabbing.
Use of the T-2 disconnect feature eliminates the need for expensive seal assemblies.
Rated to 10,000psi at 250ºF with elevated temperature capabilities up to 425ºF with choice of appropriate elastomers.
ASI-X 10K Production Packer
sizeInches (mm)
Casing Weightlbs/ft (kg/m)
Max O.d.Inches (mm)
Min i.d.Inches (mm)
PrOduCt nuMber
4.500 (114.30) 13.5-15.1 (20.1-22.5) 3.680 (93.47) 1.922 (48.82) T600-45B-010
4.500 (114.30) 13.5-15.1 (20.1-22.5) 3.680 (93.47) 1.922 (48.82) T600-45B-030
4.500 (114.30) 9.5-13.5 (14.1-20.1) 3.766 (95.66) 1.922 (48.82) T600-45A-010
5.000 (127.00) 18.0-20.8 (26.8-31.0) 4.000 (101.60) 1.984 (50.39) T600-50B-010
5.000 (127.00) 18.0-20.8 (26.8-31.0) 4.000 (101.60) 1.984 (50.39) T600-50B-030
5.000 (127.00) 11.5-15.0 (17.1-22.3) 4.125 (104.78) 1.984 (50.39) T600-50A-010
5.500 (139.70) 20.0-23.0 (29.8-34.2) 4.500 (114.30) 1.985 (50.42) T600-55B-010
5.500 (139.70) 14.0-20.0 (20.8-29.8) 4.625 (117.48) 1.985 (50.42) T600-55A-010
5.500 (139.70) 13.0-14.0 (19.3-20.8) 4.781 (121.44) 1.985 (50.42) T600-55C-010
5.500 (139.70) 23.0-26.0 (34.2-38.7) 4.406 111.91) 2.360 (59.94) T600-56E-010
5.500 (139.70) 20.0-23.0 (29.8-34.2) 4.500 (114.30) 2.360 (59.94) T600-56B-010
5.500 (139.70) 20.0-23.0 (29.8-34.2) 4.500 (114.30) 2.360 (59.94) T600-56B-030
5.500 (139.70) 15.5-20.0 (23.1-29.8) 4.625 (117.48) 2.360 (59.94) T600-56A-010
6.625 (168.28) 24.0-32.0 (35.7-47.6) 5.500 (139.70) 2.484 (63.09) T600-65A-010
6.625 (168.28) 17.0-24.0 (25.3-35.7) 5.750 (146.05) 2.484 (63.09) T600-65B-010
7.000 (177.80) 26.0-32.0 (38.7-47.6) 5.875 (149.23) 2.485 (63.12) T600-70A-010
7.000 (177.80) 23.0-29.0 (34.2-43.2) 5.969 (151.61) 2.485 (63.12) T600-70C-010
7.000 (177.80) 17.0-26.0 (25.3-38.7) 6.000 (152.40) 2.485 (63.12) T600-70B-010 US PAT # 7,082,991
14
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents 041012
ASI-X HP Production Packer
The T603 ASI-X HP Production Packer is a high pressure double grip tubing retrievable
packer that holds pressure from above and below. The HP version of this ASI-X packer
is capable of being set in tnesion or compression, once set the tubing string can be left in
tension, compression or neutral. It is normally set and retrieved using a ¼ turn to the right.
It is designed to be run with the standard T-2 On-Off Tool disconnect as the seal assembly
and retrieving tool. The release mechanism incorporates an internal by-pass which opens
to equalize pressure before the upper slips are released from the casing wall by means of a
sequential release system.
features and benefits The packer can be set in tension, compression or neutral depending on the application.
Standard setting and releasing methods incorporate a ¼ turn to the right at the tool.
The internal by-pass equalizes pressure across the packer to reduce any tendency to swabbing.
Use of the T-2 disconnect feature eliminates the need for expensive seal assemblies.
Available in shear relase design.
Standard element design rated at 250°F with elevated temperature capabilities up to 425°F with choice of appropriate elastomers.
�� Standard�flow�wet�parts�AISI�4130-4145,�110�KSI.
ASI-X HP Production Packer
sizeInches (mm)
Casing Weightlbs/ft (kg/m)
Max O.d.Inches (mm)
Min i.d.Inches (mm)
PrOduCt nuMber
7.625 (193.68) 39.0-45.3 (50.1-67.4) 6.250 (158.75) 2.485 (63.12) T603-70G-010
7.625 (193.68) 33.7-39.0 (50.2-58.0) 6.453 (163.91) 2.485 (63.12) T603-75A-010
7.625 (193.68) 24.0-33.7 (35.7-50.2) 6.672 (169.47) 2.485 (63.12) T603-75C-010
8.625 (219.08) 24.0-40.0 (35.7-59.5) 7.500 (190.50) 2.985 (75.82) T603-85A-010
9.625 (244.48) 43.5-53.5 (64.7-79.6) 8.250 (209.55) 3.985 (101.22) T603-95A-010
9.625 (244.48) 32.3-43.5 (48.1-64.7) 8.250 (209.55) 3.985 (101.22) T603-95B-010
US PAT # 7,082,991
15
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents
US PAT # 7,591,305 US PAT # 7,082,991
041012
Patriot Packer
The T607 Patriot Packer is a mechanically set retrievable production packer used in many
applications, particularly in injection wells. It is a double grip packer utilizing a special upper
slip releasing system which reduces the forces required to release. Once set it is mechanically
locked and can hold substantial pressures from above or below. Set with a ¼ turn to the right
the Patriot can be set shallow with tension or deeper with compression and once set it can
remain in neutral making it ideal for applications where pressure reversals are anticipated. It
can also be set on wireline if required, with an On/Off Tool, for greater versatility.
features and benefits Holds pressure differentials from above and below.
Set and released by a ¼ turn to the right followed by compression or tension as required.
Can be run with an On/Off Tool with suitable tubing release mechanism.
Can be set at any depth in tension, compression or neutral.
An internal by-pass allows for faster running in.
�� The�same�by-pass�opens�first�to�equalize�pressure�upon�retrieval�and�counters�any�swabbing tendency while pulling out.
Upper slip releasing system reduces retrieval force requirements.
Can be run on electric line using a wireline adapter kit and On/Off Tool seal nipple for greater versatility.
Available in materials suitable for corrosive environments upon request.
Patriot Packer
sizeInches (mm)
Max O.d.Inches (mm)
Min i.d.Inches (mm)
PrOduct nuMber
4.500 (114.30) 3.750 (95.25) 1.923 (48.85) T607-45A-000
5.500 (139.70) 4.625 (117.48) 1.985 (50.42) T607-55A-000
5.500 (139.70) 4.781 (121.44) 1.985 (50.42) T607-55C-000
5.500 (139.70) 4.500 (114.30) 2.360 (59.94) T607-56B-000
5.500 (139.70) 4.625 (117.48) 2.360 (59.94) T607-56A-000
5.500 (139.70) 4.781 (121.44) 2.360 (59.94) T607-56C-000
7.000 (177.80) 5.875 (149.23) 2.485 (63.12) T607-70A-000
7.000 (177.80) 5.969 (151.61) 2.485 (63.12) T607-70C-000
7.000 (177.80) 6.000 (152.40) 2.485 (63.12) T607-70B-000
7.000 (177.80) 6.000 (152.40) 2.985 (75.82) T607-73B-000
7.000 (177.80) 6.250 (158.75) 2.985 (75.82) T607-73A-000
9.625 (244.48) 8.250 (209.55) 3.985 (101.22) T607-95A-020
9.625 (244.48) 8.500 (215.90) 3.985 (101.22) T607-95B-020
10.750 (273.05) 9.437 (239.70) 3.985 (101.22) T607-10B-000
10.750 (273.05) 9.688 (246.08) 3.985 (101.22) T607-10A-020
11.750 (298.45) 10.500 (266.70) 3.985 (101.22) T607-11A-020
16
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents
US PAT # 7,082,991
061212
ASII Compression Packer
The T611 ASII Double Grip Retrievable Packer is used for production, stimulation and testing.
The mechanical upper hold down system reduces the cost and maintenance of a button type
hydraulic hold down system. The ASII Packer is equipped with a running bypass that reduces
swabbing. Set down weight closes the bypass valve, sets the upper and lower slips and
energizes the packing elements. The closed bypass valve activates the pressure balanced hold
down system. Pressure from below aids in holding the bypass valve closed and preventing
upward movement of the tubing string.
features and benefits No hydraulic hold down buttons
Built in unloader washes debris from when retrieving
Sequential release upper slip system
�� Available�in�automatic�and�manual�configurations
ASII Production Packer
sizeInches (mm)
Casing Weightlbs/ft (kg/m)
Max O.d.Inches (mm)
Min i.d.Inches (mm)
PrOduCt nuMber
2.875 (73.00) 6.4-6.5 (9.5-9.7) 2.250 (57.15) 0.610 (15.49) T611-25A-000
2.875 (73.00) 6.4-6.5 (9.5-9.7) 2.250 (57.15) 0.610 (15.49) T611-25A-010
3.500 (88.90) 7.7-10.2 (11.5-15.0) 2.781 (70.63) 1.235 (31.37) T611-35A-000
3.500 (88.90) 7.7-10.2 (11.5-15.0) 2.781 (70.63) 1.235 (31.37) T611-35A-010
4.500 (114.30) 13.5-15.1 (20.9-22.5) 3.661 (92.99) 1.923 (48.84) T611-45B-000
4.500 (114.30) 9.5-13.5 (14.1-20.9) 3.750 (95.25) 1.923 (48.84) T611-45A-000
5.000 (127.00) 18.0-21.4 (26.8-31.8) 4.000 (101.60) 1.923 (48.84) T611-50B-000
5.000 (127.00) 15.0-18.0 (22.3-26.8) 4.125 (104.78) 1.923 (48.84) T611-50A-000
5.500 (139.70) 14.0-20.0 (20.8-29.8) 4.625 (117.48) 1.985 (50.42) T611-55A-000
5.500 (139.70) 23.0-26.0 (34.2-38.7) 4.406 (111.91) 2.360 (59.94) T611-56E-000
5.500 (139.70) 20.0-23.0 (29.8-34.2) 4.500 (114.30) 2.360 (59.94) T611-56B-000
5.500 (139.70) 15.5-20.0 (23.1-29.8) 4.625 (117.48) 2.360 (59.94) T611-56A-000
5.500 (139.70) 13.0-14.0 (19.3-20.8) 4.781 (121.44) 2.360 (59.94) T611-56C-000
7.000 (177.80) 26.0-32.0 (38.7-47.6) 5.875 (149.23) 2.485 (63.12) T611-70A-000
7.000 (177.80) 17.0-29.0 (25.3-43.2) 5.969 (151.61) 2.485 (63.12) T611-70C-000
7.000 (177.80) 17.0-26.0 (25.3-38.7) 6.000 (152.40) 2.485 (63.12) T611-70B-000
7.000 (177.80) 26.0-32.0 (38.7-47.6) 5.875 (149.23) 2.985 (75.82) T611-73A-000
7.000 (177.80) 17.0-29.0 (25.3-43.2) 5.969 (151.61) 2.985 (75.82) T611-73C-000
7.000 (177.80) 17.0-29.0 (25.3-43.2) 6.000 (152.40) 2.985 (75.82) T611-73B-000
17
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents 041012
AS-5 Anchor Packer
The T628 AS-5 Anchor Packer is the upper packer in a zone isolation completion. The packer
was designed to run above the AS-6 Compression Packer. The AS-5 Packer sets by applying
weight closing the bypass seal and energizing the packing elements. Once set the AS-5 can be
locked in place allowing the tubing string to be removed using the T-2 On/Off Tool. The AS-5
sets and releases with one quarter turn right hand rotation at the packer.
features and benefits Allows tubing disconnect in straddle completions
Sequential release slip system
Large bypass area
Equalizing bypass system opens before upper slips are released
Premium thread connection available upon request.
Packing element combo available up to 450°F, see TEAM Oil Tools Elastomer Guide.
AS-5 Anchor Packer
sizeInches (mm)
Max O.d.Inches (mm)
Min i.d.Inches (mm)
PrOduct nuMber
4.500 (114.30) 3.750 (95.25) 1.925 (48.90) T628-45A-000
5.000 (127.00) 4.125 (104.78) 1.925 (48.90) T628-50A-000
5.500 (139.70) 4.500 (114.30) 1.985 (50.42) T628-55B-000
5.500 (139.70) 4.625 (117.48) 1.985 (50.42) T628-55A-000
5.500 (139.70) 4.500 (114.30) 2.360 (59.94) T628-56B-000
5.500 (139.70) 4.625 (117.48) 2.360 (59.94) T628-56A-000
5.500 (139.70) 4.781 (121.84) 2.360 (59.94) T628-56C-000
7.000 (177.80) 6.000 (152.40) 2.485 (63.12) T628-70B-000
9.625 (244.48) 8.250 (209.55) 3.985 (101.22) T628-95A-000
9.625 (244.48) 8.500 (215.90) 3.985 (101.22) T628-95B-000
18
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents
US PAT # 7,082,991
041012
AS-6 Anchor Packer
The T629 AS-6 Anchor Packer is a single grip compression packer designed for use as the
bottom packer in a zonal isolation completion. It is typically used in conjunction with a T-628
AS-5 anchor packer to provide a two packer system which can be set by compression. This
combination in conjunction with a T-2 On/Off Tool allows for zonal isolation while providing the
facility to retrieve the tubing if required without disturbing the packers. It is set by applying
a quarter turn at the packer and setting down weight and is released by straight pick up. It
has an extended seal area which allows tubing movement and/or pressure changes between
the packers. It can also be used as a single grip production packer in applications where low
differential pressures from below are anticipated.
features and benefits Extended stroke seal area maintains a seal in all conditions.
Large by-pass area facilitates fast run in and alleviates swabbing when retrieving.
�� Available�in�right�or�left�hand�automatic�or�manual�J-slot�configurations.
Sets with compression and retrieves with straight pull.
Can be used as a single string production packer in suitable conditions.
Premium thread connection available upon request.
Packing element combo available up to 450°F, see TEAM Oil Tools Elastomer Guide.
AS-6 Anchor Packer
sizeInches (mm)
Max O.d.Inches (mm)
Min i.d.Inches (mm)
PrOduct nuMber
4.500 (114.30) 3.750 (95.25) 1.925 (48.90) T629-45A-000
4.500 (114.30) 3.750 (95.25) 1.925 (48.90) T629-45A-000
5.000 (127.00) 4.125 (104.78) 1.925 (48.90) T629-50A-000
5.500 (139.70) 4.625 (117.48) 1.985 (50.42) T629-55A-000
5.500 (139.70) 4.625 (117.48) 1.985 (50.42) T629-55A-000
5.500 (139.70) 4.500 (114.30) 2.360 (59.94) T629-56B-000
5.500 (139.70) 4.625 (117.48) 2.360 (59.94) T629-56A-000
5.500 (139.70) 4.781 (121.44) 2.360 (59.94) T629-56C-000
7.000 (177.80) 6.000 (152.40) 2.485 (63.12) T629-70B-000
19
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents
US PAT # 7,082,991
041012
AS-3 Single Grip Packer
The T631 AS-3 Single Grip Packer is designed for use in wells that where minimal differential
from below is anticipated so that a hold down device is not needed. It is set by applying a
quarter turn to the right at the packer followed by set down weight. The packer is released by
straight pick up to open the large by-pass allowing equalization. After equalization, the packing
elements release reducing tendency of swabbing when pulling out of wellbore. Full opening
design allows unrestricted fluid flow and wireline tool movement through the tubing.
features and benefits Set by right-hand rotation and set down weight.
Large by-pass for ease of running and swabbing prevention when retrieving.
Available with optional setting bottom configurations.
Straight pick-up to release.
Full through bore allows for unrestricted fluid flow and wireline tool access.
Premium thread connection available upon request.
Packing element combo available up to 450°F, see TEAM Oil Tools Elastomer Guide.
AS-3 Single Grip Packer
sizeInches (mm)
Max O.d.Inches (mm)
Min i.d.Inches (mm)
PrOduct nuMber
4.500 (114.30) 3.750 (95.25) 1.933 (49.10) T631-45A-000
5.500 (139.70) 4.500 (114.30) 1.985 (50.42) T631-55B-000
5.500 (139.70) 4.625 (117.48) 1.985 (50.42) T631-55A-000
5.500 (139.70) 4.500 (114.30) 2.360 (59.94) T631-56B-000
5.500 (139.70) 4.625 (117.48) 2.360 (59.94) T631-56A-000
5.500 (139.70) 4.781 (121.44) 2.360 (59.94) T631-56C-000
6.625 (168.28) 5.500 (139.70) 2.485 (63.12) T631-65A-000
7.000 (177.80) 5.875 (149.23) 2.485 (63.12) T631-70A-000
7.000 (177.80) 5.875 (149.23) 2.485 (63.12) T631-70C-000
7.000 (177.80) 6.000 (152.40) 2.485 (63.12) T631-70B-000
7.625 (193.68) 6.453 (163.91) 2.485 (63.12) T631-75A-000
7.625 (193.68) 6.625 (168.28) 2.485 (63.12) T631-75B-000
8.625 (219.08) 7.500 (190.50) 2.485 (63.12) T631-85A-000
9.625 (244.48) 8.250 (209.55) 3.985 (101.22) T631-95A-000
9.625 (244.48) 8.500 (215.90) 3.985 (101.22) T631-95B-000
20
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents
US PAT # 7,082,991
100912
SnapSet II Compression Isolation Packer
The T636 SnapSet II is a compression set single string isolation packer. The SnapSet II is
used where high-differential pressures above the packer are not expected. It is typically run
in a zonal isolation completion, in tandem with a lower anchor packer, such as the T600 ASI-X
allowing compression setting. It is equipped with a collet which shifts at a predetermined
compression value to prevent premature setting during run in. Once the collet shifts the
packing elements are engaged and the hold down slips are activated and set. It is released by
straight pick up on the tubing, opening the by-pass and releasing the upper slips.
features and benefits The hold down system incorporates a compensating piston.
The large by-pass area facilitates run in and counteracts any tendency to swabbing when retrieving.
The equalizing system allows the packing element to relax before retrieval.
The body is keyed to allow rotation through the packer if needed.
Three element packing system.
Internal collet to prevent premature setting.
Sequential slip release system.
Can be run with the T-2 On-Off Tool to allow tubing retrieval.
Premium thread connection available upon request.
Packing element combo available up to 450°F, see TEAM Oil Tools Elastomer Guide.
SnapSet II Compression Isolation Packer
sizeInches (mm)
Max O.d.Inches (mm)
Min i.d.Inches (mm)
PrOduct nuMber
4.500 (114.30) 3.656 (92.86) 1.923 (48.84) T636-45B-000
4.500 (114.30) 3.750 (95.25) 1.923 (48.84) T636-45A-000
5.500 (139.70) 4.625 (117.48) 1.985 (50.42) T636-55A-000
5.500 (139.70) 4.625 (117.48) 2.360 (59.94) T636-56A-000
5.500 (139.70) 4.781 (121.44) 2.360 (59.94) T636-56C-000
7.000 (177.80) 5.875 (149.23) 2.485 (63.12) T636-70A-000
7.000 (177.80) 5.969 (151.61) 2.485 (63.12) T636-70C-000
7.000 (177.80) 6.000 (152.40) 2.485 (63.12) T636-70B-000
7.650 (193.68) 6.672 (169.47) 2.485 (63.12) T636-75C-000
8.625 (219.08) 7.750 (196.85) 2.485 (63.12) T636-85B-000
21
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents 041012
Compression Isolation Packer
The T641 Compression Isolation Packer is an economical means of isolating multiple zone
wells. The T641 Packer is used as the upper packer in tandem string applications
features and benefits Economical
Adjustable shear values
Resetable
Simple operation
Compression Isolation Packer
sizeInches (mm)
tubing sizeInches (mm)
Max O.d.Inches (mm)
Min i.d.Inches (mm)
PrOduct nuMber
4.500 (114.30) 2.375 (60.30) 3.750 (95.25) 2.000 (50.80) T641-45A-000
5.000 (127.00) 2.375 (60.30) 4.000 (101.60) 2.000 (50.80) T641-50A-000
5.500 (139.70) 2.375 (60.30) 4.625 (117.40) 2.000 (50.80) T641-55A-000
5.500 (139.70) 2.875 (73.00) 4.625 (117.40) 2.000 (50.80) T641-56A-000
7.000 (177.80) 2.875 (73.00) 6.000 (152.40) 2.500 (63.50) T641-70B-000
7.000 (177.80) 2.875 (73.00) 5.875 (149.23) 2.500 (63.50) T641-70A-000
7.000 (177.80) 3.500 (88.90) 5.875 (149.23) 3.000 (76.20) T641-73A-000
7.000 (177.80) 3.500 (88.90) 6.000 (152.40) 3.000 (76.20) T641-73B-000
9.625 (244.78) 4.500 (101.60) 8.500 (215.90) 4.000 (101.60) T641-97A-000
22
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents 041012
HS-1 Hydraulic Production Packer
The T650 HS-1 Hydraulic Set Packer is a high pressure hydraulic set double grip production
packer for use in wells where it is desirable to set after the well has been flanged up. It is
equally suitable for single completions or in wells where multiple packers are required,
because the pressure balance system is zone activated thus offsetting pressure differentials
across the packer. All parts are locked to prevent presetting due to pressure build up or debris
when running in. It is retrieved by a straight pull shear release.
features and benefits Suitable for single or multiple packer completions.
All components are locked to prevent premature setting during run in.
Set by hydraulic pressure from surface against a plug or ball and set below.
Once set the release shear mechanism is unaffected by differential pressures.
A pressure balanced system offsets pressure reversals.
Released by a straight pull.
HS-1 Hydraulic Production Packer
sizeInches (mm)
Max O.d.Inches (mm)
Min i.d.Inches (mm)
teMp. rating°F (°C)
pressureratingPSI (bar)
prOduct nuMber
4.500 (114.30) 3.656 (92.86) 1.984 (50.39) 300 (148.89) 7,000 (382.63) T650-45B-000
4.500 (114.30) 3.750 (95.25) 1.984 (50.39) 300 (148.89) 7,000 (382.63) T650-45A-000
5.500 (139.70) 4.500 (114.30) 1.984 (50.39) 300 (148.89) 7,000 (382.63) T650-55B-000
5.500 (139.70) 4.625 (117.48) 1.984 (50.39) 300 (148.89) 7,000 (382.63) T650-55A-000
5.750 (146.05) 4.744 (120.50) 1.984 (50.39) 300 (148.89) 7,000 (382.63) T650-55D-005
6.625 (168.28) 5.500 (139.70) 2.484 (63.09) 300 (148.89) 7,000 (382.63) T650-65A-000
7.000 (177.80) 5.875 (149.23) 2.484 (63.09) 300 (148.89) 7,000 (382.63) T651-70A-000
7.000 (177.80) 6.000 (152.40) 2.484 (63.09) 300 (148.89) 7,000 (382.63) T651-70B-000
7.000 (177.80) 5.875 (149.23) 2.984 (75.79) 300 (148.89) 7,000 (382.63) T650-73A-000
7.000 (177.80) 6.000 (152.40) 2.984 (75.79) 300 (148.89) 7,000 (382.63) T650-73B-000
7.650 (193.68) 6.453 (163.91) 2.984 (75.79) 300 (148.89) 7,000 (382.63) T650-75A-000
7.650 (193.68) 6.625 (168.28) 2.984 (75.79) 300 (148.89) 7,000 (382.63) T650-75B-000
9.625 (244.48) 8.250 (209.55) 2.984 (75.79) 300 (148.89) 5,000 (344.74) T650-95A-000
9.625 (244.48) 8.500 (215.90) 2.984 (75.79) 300 (148.89) 5,000 (344.74) T650-95B-000
9.625 (244.48) 8.250 (209.55) 3.938 (100.03) 300 (148.89) 5,000 (344.74) T650-96A-000
US PAT # 7,082,991
23
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents 041012
HS-4 Isolation Packer
The TEAM T654 HS-4 Isolation Packer is a hydraulic set, single string tandem packer used in
multiple zone well completions. It can be used as the upper packer in a dual zone applications
or I multiple quantities when more than two zones are to be completed. The HS-4 is set by
applying hydraulic pressure to the tubing against a temporary plug located below to shear
the setting screws and pack off the elements. It is released by straight pull which shears the
releasing screws allowing the packing elements to relax and equalizing pressure from tubing
to annulus.
features and benefits Economical Deisgn
�� Easily�adjustable�set�and�release�shear�screws,�both�field�adjustable.
Compact length makes it ideal for use in highly deviated wells.
Standard three piece nitrile packing elements, premium elements available on request.
Flow wet material is AISI 4130-4145, 80 KSI, premium material available on request.
End connections EUE 8 Rd, premium threads available on request.
HS-4 Isolation Packer
sizeInches (mm)
Casing Weightlb/ft (kg/m)
Max O.d.Inches (mm)
Min i.d.Inches (mm)
PrOduCt nuMber
4.500 (114.30) 9.5-11.5 (14.14-17.11) 3.750 (95.25) 1.985 (50.42) T654-45A-000
5.000 (127.00) 11.5-18.0 (17.11-26.78) 4.125 (104.78) 1.985 (50.42) T654-50A-000
5.500 (139.70) 14.0-20.0 (20.83-29.76) 4.625 (117.48) 1.985 (50.42) T654-55A-000
5.500 (139.70) 14.0-20.0 (20.83-29.76) 4.625 (117.48) 2.485 (63.12) T654-56A-000
7.000 (177.80) 26.0-32.0 (38.69-47.62) 5.875 (149.23) 2.485 (63.12) T654-70A-000
7.000 (177.80) 17.0-26.0 (25.30-38.69) 6.000 (152.40) 2.485 (63.12) T654-70B-000
24
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents 041012
HSR-4 Hydraulic Production Packer
The T658 HSR-4 is a hydraulic set retrievable production packer suitable for use in high
pressure well completions. It is very compact and highly suitable for use in deviated wells.
It features a bi-directional slip which holds pressure from above and below. The lock ring
holds the packing elements in the full set position and is unaffected by pressure reversals.
The packer does not have an internal by-pass to allow equalization when releasing. It is
recommended to utilize an On/Off Tool or sliding sleeve above the packer to aid equalization.
features and benefits Hydraulic set by pressure against a down hole plugging device below.
�� The�well�can�be�flanged�up�before�setting�the�packer.
Three element packing system for high pressure applications.
�� Retrieved�by�means�of�a�field�adjustable�shear�release.
Bi-directional slip system which is locked in place to prevent preset while running in.
All o-rings are located below the packing element.
An equalization device is recommended to counter swabbing when retrieving.
Alternative packing elements, premium threads and metallurgy available on request.
Full tubing ID.
Torque through capability.
HSR-4 Hydraulic Production Packer
sizeInches (mm)
Max O.d.Inches (mm)
Min i.d.Inches (mm)
PrOduct nuMber
4.500 (114.30) 3.750 (95.25) 1.985 (50.42) T658-45A-000
25
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents 120312
MSV Dual Compression Packer
The T900 MSV Dual Compression Packer is a retrievable compression set isolation packer
which is used as the upper packer in a tow packer chamber gas lift completion. The bypass
tube is an integral part of the MSV and a telescoping slip joint is used for spacing out and
connection to a gas lift mandrel. The packer is keyed with heavy duty bolts that allow torque to
be applied for setting and releasing of a lower packer. Once the lower packer is set, set down
weight is applied to shear the screws in the MSV packer and energize the packing element.
features and benefits Simple operation.
Rugged construction.
Compression set - straight pick-up release.
Field adjustable setting shear screws.
T900 MSV Dual Compression Packer
sizeInches (mm)
Casing Weightlb/ft (kg/m)
Max O.d.Inches (mm)
Min i.d.Inches (mm)
PrOduCt nuMber
5.500 (139.70) 20.0-23.0 (29.8-34.2) 4.500 (114.30) 1.922 (48.82) T900-55B-000
7.000 (177.80) 17.0-26.0 (25.3-38.7) 6.000 (152.40) 2.485 (63.12) T900-70B-000
26
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents 041012
T901 R-2 Dual String Tension Packer
The T901 R-2 Dual String Tension Packer is the upper packer in multi-zone installations. The
T901 R-2 Tension Packer is used with the M-2 Tension Packer for simple multi-zone waterflood
wells. The R-2 Dual String Packer can handle large volumes of fluid eliminating the use of
downhole flow regulators.
Setting: Run the M-2 and R-2 packers to setting depth, with the last movement downward turn
one quarter turn to the left and pick-up, this will set the lower M-2 Tension Packer. Run the
J-latch seal assembly into the R-3 Packer and pull tension to achieve pack-off.
Release: Slack off on short string will relax the R-3 packing element and turn one quarter turn
to right at packer and pick up to release short string from packer. Slack off on long string and
turn one quarter turn to the right to relax M-2 packer element and release slip assembly. The
M-2 Tension Packer may also be shear released at a pre-determined value.
features and benefits Full Bore Design
Economical
Simple Operation
Can Be Used Shallow or Deep
Available with Nickel or Plastic Coatings
T901 R-2 Dual String Tension Packer
sizeInches (mm)
Casing Weightlb/ft (kg/m)
Max O.d.Inches (mm)
Min i.d.Inches (mm)
PrOduCt nuMber
5.500 (139.70) 13.0-20.0 (330.2-508.0) 4.625 (117.48) 2.000 (50.80) T901-55A-000
5.500 (139.70) 20.0-23.0 (508.0-584.2) 4.500 (114.30) 2.000 (50.80) T901-55B-000
7.000 (177.80) 17.0-26.0 (431.8-660.4) 6.000 (152.40 2.500 (63.50) T901-70B-000
7.000 (177.80) 26.0-32.0 (660.4-812.8) 5.875 (149.23) 2.500 (63.50) T901-70A-000
8.625 (219.07) 24.0-40.0 (609.6-1016.0) 7.500 (190.50) 2.500 (63.50) T901-85A-000
27
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents 041012
HS-II Hydraulic Set Dual String Packer
The T905 HS-II is a high pressure hydraulic set dual string production packer usually run
above a single string hydraulic or wireline set single string packer in a dual completion. It can
also be readily modified for use as a low pressure packer in a submersible pump completion.
Its compact length makes it ideal for use in deviated wells or in applications where doglegs are
anticipated.
The sequential upper slip release system ensures that each slip is released individually to
reduce the loads required to release the packer. The HS-II Packer is available with short string
or long string setting capabilities and a variety of tubing connections and short string seal
options. It is also adaptable for electric, submersible pump applications.
features and benefits Hydraulic set to allow well completions to be flanged up before setting.
Released by straight pull on the long string with field adjustable shear setting.
Dressed with upper slip rather than hold-down buttons for added reliability.
Can be pressure tested on location prior to running.
All components locked in place to avoid premature setting while running in.
Available in long or short sting set configuration.
Shear release mechanism is unaffected by differential pressures.
Short string connection can be threaded or configured with a seal bore to accept locator, J-latch or snap latch seals.
Premium thread connections are available upon request.
HS-II Hydraulic Set Dual String Packer
sizeInches (mm)
Max O.d.Inches (mm)
LOng string shOrt string PrOduct nuMber
Min i.d.Inches (mm)
tensiLelbs/ft (kg/ft)
Min i.d.Inches (mm)
tensiLelbs/ft (kg/ft)
7.000 (177.80) 5.938 (150.83) 1.933 (49.10) 60000 (27215.54) 1.933 (49.10) 50000 (22679.62) T905-70A-006
7.000 (177.80) 5.938 (150.83) 1.933 (49.10) 60000 (27215.54) 1.933 (49.10) 50000 (22679.62) T905-70A-007
9.625 (244.48) 8.313 (211.15) 2.910 (73.91) 120000 (54431.08) 2.910 (73.91) 120000 (54431.08) T905-96A-000
28
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents 040512
TEAM Pack
The Team Oil Tools T265 Team Pack packer is a retrievable seal bore packer which can be
run on electric line with a wireline adapter kit and setting tool or on tubing using a hydraulic
setting tool. All the load bearing parts are designed to withstand high tensile loads and the bi-
directional slips prevent any movement after setting. It is retrieved by a straight pull release
mechanism using a Team Pack Retrieving Tool.
features and benefits Designed for use in vertical, deviated or horizontal well completion applications.
Bi-directional slips prevent any movement after setting.
An internal locking device maintains pack off.
Retrieved by a straight pull shear release using a Team Pack retrieving tool.
Retrieving tool has an emergency shear release feature in the event that the packer does not release.
Available with materials and elastomers suitable for standard or sour service.
�� Rated�at�10,000psi�and�up�to�425˚F�with�Special�Ecner�Array�elastomers.
TEAM Pack
sizeInches (mm)
Max O.d.Inches (mm)
Min i.d.Inches (mm)
PrOduct nuMber
4.500 (114.30) 3.906 (99.21) 2.500 (63.50) T265-45A-000
5.500 (139.70) 4.625 (117.47) 3.000 (76.20) T265-56B-000
5.500 (139.70) 4.625 (117.47) 3.000 (76.20) T265-56A-000
7.000 (177.80) 5.813 (150.83) 4.000 (101.60) T265-73A-000
7.000 (177.80) 5.938 (152.40) 4.000 (101.60) T265-73B-000
7.000 (177.80) 6.000 (152.40) 4.000 (101.60) T265-73C-000
7.625 (193.68) 6.438 (163.53) 4.000 (101.60) T265-76A-000
7.625 (193.68) 6.688 (169.88) 4.000 (101.60) T265-76B-000
29
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents 110212
TL Perma-Pack Seal Bore Packer
The T670 Perma-pack Permanent Seal Bore Production Packer is a versatile tool that can be
used for single or multiple zone completions. The Perma-pack is ideally suited for wells where
high pressure, temperatures and corrosive fluids are anticipated. The packer is available in a
variety of elastomers and seal bore materials to meet the most hostile down hole environments.
The Perma-pack is recommended for injection stimulation, testing or can be converted into a
temporary bridge plug by using a knock-out, pump-out or screw-out plug bottom assembly.
The Perma-Pack Packer is available with a complete line of tubing seal accessories and
elastomers. Seal assemblies are available with TATR, TRTR, TVTR, BONDED NITRILE, BONDED
VITON, BONDED ECO and BONDED EPDM.
features and benefits Electric line set, hydraulic set or mechanical set
Components keyed for milling
Anti-extrusion rings expand to casing I.D. to prevent rubber extrusion
Designed to accommodate competitive seal bore accessories.
Full circle slip allow for fast run time
TL Perma-Pack Seal Bore Packer
sizeInches (mm)
Casing Weightlb/ft (kg/m)
Max O.d.Inches (mm)
PaCker bOreInches (mm)
Min. bOre thru sealsInches (mm)
PrOduCt nuMber
4.500 (114.30) 9.5-13.5 (14.4-20.1) 3.750 (95.20) 2.390 (60.71) 1.703 (43.26) T670-43A-000
4.500 (114.30) 13.5-15.1 (20.1-22.5) 3.594 (91.29) 2.500 (63.50) 1.901 (48.29) T670-44B-000
4.500 (114.30) 9.5-13.5 (14.4-20.1) 3.750 (95.20) 2.688 (68.28) 1.938 (49.29) T670-45A-000
5.000 (127.00) 15.0-20.8 (22.3-31.0) 3.968 (100.79) 2.390 (60.71) 1.703 (43.26) T670-50A-000
5.000 (127.00) 15.0-20.5 (22.3-31.0) 3.968 (100.79) 2.688 (68.28) 1.938 (49.23) T670-51A-000
5.000 (127.00) 11.5-13.0 (17.1-19.3) 4.250 (107.95) 2.688 (68.28) 1.938 (49.23) T670-55C-000
5.500 (139.70) 13.0-17.0 (19.3-25.3) 4.562 (115.87) 2.688 (68.28) 1.938 (49.23) T670-55A-000
5.500 (139.70) 17.0-23.0 (25.3-34.2) 4.437 (112.70) 2.688 (68.28) 1.938 (49.23) T670-55B-000
5.500 (139.70) 13.0-17.0 (19.3-25.3) 4.562 (115.87) 3.000 (76.20) 2.375 (60.30) T670-56A-000
5.500 (139.70) 17.0-23.0 (25.3-34.2) 4.437 (112.70) 3.000 (76.20) 2.375 (60.30) T670-56B-000
7.000 (177.80) 23.0-32.0 (43.2-47.6) 5.687 (144.45) 3.250 (82.55) 2.406 (61.11) T670-70A-000
7.000 (177.80) 32.0-38.0 (47.6-56.5) 5.468 (138.89) 3.250 (82.55) 2.406 (61.11) T670-70C-000
7.000 (177.80) 17.0-20.0 (25.3-29.8) 6.187 (157.15) 3.250 (82.55) 2.406 (61.11) T670-70B-000
7.000 (177.80) 20.0-23.0 (29.8-34.2) 6.000 (152.40) 4.000 (101.60) 3.000 (76.20) T670-71A-000
7.000 (177.80) 26.0-29.0 (38.7-43.2) 5.875 (149..23) 4.000 (101.60) 3.000 (76.20) T670-71B-000
7.625 (193.70) 24.0-39.0 (35.7-58.0) 6.625 (158.75) 3.250 (82.55) 2.406 (61.11) T670-75A-000
7.625 (193.70) 24.0-33.7 (35.7-50.2) 6.500 (165.10) 4.000 (101.60) 3.000 (76.20) T670-76A-000
7.625 (193.70) 33.7-39.0 (50.2-58.0) 6.250 (158.75) 4.000 (101.60) 3.000 (76.20) T670-76B-000
9.625 (244.50) 29.3-53.5 (43.6-79.6) 8.125 (206.38) 3.250 (82.55) 2.406 (61.11) T670-95A-000
9.625 (244.50) 29.3-53.5 (43.6-79.6) 8.125 (206.38) 4.000 (101.60) 3.000 (76.20) T670-96A-000
9.625 (244.50) 29.3-53.5 (43.6-79.6) 8.125 (206.38) 4.750 (120.65) 3.875 (98.43) T670-97A-000
9.625 (244.50) 36.0-47.0 (53.6-69.9) 8.438 (214.33) 6.000 (152.40) 4.875 (123.83) T670-98B-000
9.625 (244.50) 40.0-58.4 (60.4-86.9) 8.218 (208.74) 6.000 (152.40) 4.875 (123.83) T670-98A-000
30
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents 110212
JL Perma-Pack Seal Bore Packer
The T671 Perma-Pack Permanent Seal bore Production Packer is a versatile tool that can be used
for single or multiple zone completions. The Perma-Pack is ideally suited for wells where high
pressure, temperature and corrosive fluids are anticipated. The packer is available in a variety of
elastomer and seal bore materials to meet the most hostile downhole environments. The PERMA-
PACK is recommended for injection, stimulation, testing or plugging by latching a equalizing
packer plug into the top connection. The Perma-Pack is available with a complete line of tubing
seal accessories and elastomers.
features and benefits Electric line set, hydraulic set or mechanical set
Components keyed for milling
Anti-extrusion rings expand to casing I.D. to prevent rubber extrusion
Designed to accommodate competitive seal bore accessories.
Full circle slip allow for fast run time
JL Perma-Pack Seal Bore Packer
sizeInches (mm)
Casing Weightlb/ft (kg/m)
Max O.d.Inches (mm)
PaCker bOreInches (mm)
Min. bOre thru sealsInches (mm)
PrOduCt nuMber
4.500 (114.30) 9.5-13.5 (14.4-20.1) 3.750 (95.20) 2.390 (60.71) 1.703 (43.26) T671-43A-000
4.500 (114.30) 13.5-15.1 (20.1-22.5) 3.594 (91.29) 2.500 (63.50) 1.901 (48.29) T671-44B-000
4.500 (114.30) 9.5-13.5 (14.4-20.1) 3.750 (95.20) 2.688 (68.28) 1.938 (49.29) T671-45A-000
5.000 (127.00) 15.0-20.8 (22.3-31.0) 3.968 (100.79) 2.390 (60.71) 1.703 (43.26) T671-50A-000
5.000 (127.00) 15.0-20.5 (22.3-31.0) 3.968 (100.79) 2.688 (68.28) 1.938 (49.23) T671-51A-000
5.000 (127.00) 11.5-13.0 (17.1-19.3) 4.250 (107.95) 2.688 (68.28) 1.938 (49.23) T671-55C-000
5.500 (139.70) 13.0-17.0 (19.3-25.3) 4.562 (115.87) 2.688 (68.28) 1.938 (49.23) T671-55A-000
5.500 (139.70) 17.0-23.0 (25.3-34.2) 4.437 (112.70) 2.688 (68.28) 1.938 (49.23) T671-55B-000
5.500 (139.70) 13.0-17.0 (19.3-25.3) 4.562 (115.87) 3.000 (76.20) 2.375 (60.30) T671-56A-000
5.500 (139.70) 17.0-23.0 (25.3-34.2) 4.437 (112.70) 3.000 (76.20) 2.375 (60.30) T671-56B-000
7.000 (177.80) 23.0-32.0 (43.2-47.6) 5.687 (144.45) 3.250 (82.55) 2.406 (61.11) T671-70A-000
7.000 (177.80) 32.0-38.0 (47.6-56.5) 5.468 (138.89) 3.250 (82.55) 2.406 (61.11) T671-70C-000
7.000 (177.80) 17.0-20.0 (25.3-29.8) 6.187 (157.15) 3.250 (82.55) 2.406 (61.11) T671-70B-000
7.000 (177.80) 20.0-23.0 (29.8-34.2) 6.000 (152.40) 4.000 (101.60) 3.000 (76.20) T671-71A-000
7.000 (177.80) 26.0-29.0 (38.7-43.2) 5.875 (149..23) 4.000 (101.60) 3.000 (76.20) T671-71B-000
7.625 (193.70) 24.0-39.0 (35.7-58.0) 6.625 (158.75) 3.250 (82.55) 2.406 (61.11) T671-75A-000
7.625 (193.70) 24.0-33.7 (35.7-50.2) 6.500 (165.10) 4.000 (101.60) 3.000 (76.20) T671-76A-000
7.625 (193.70) 33.7-39.0 (50.2-58.0) 6.250 (158.75) 4.000 (101.60) 3.000 (76.20) T671-76B-000
9.625 (244.50) 29.3-53.5 (43.6-79.6) 8.125 (206.38) 3.250 (82.55) 2.406 (61.11) T671-95A-000
9.625 (244.50) 29.3-53.5 (43.6-79.6) 8.125 (206.38) 4.000 (101.60) 3.000 (76.20) T671-96A-000
9.625 (244.50) 29.3-53.5 (43.6-79.6) 8.125 (206.38) 4.750 (120.65) 3.875 (98.43) T671-97A-000
9.625 (244.50) 36.0-47.0 (53.6-69.9) 8.438 (214.33) 6.000 (152.40) 4.875 (123.83) T671-98B-000
9.625 (244.50) 40.0-58.4 (60.4-86.9) 8.218 (208.74) 6.000 (152.40) 4.875 (123.83) T671-98A-000
31
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents
Hydro Perma-Pak
The T674 Hydro Perma-Pak is a hydraulic-set dual bore permanent packer set by applied applied hydraulic pressure against a temporary plugging device set below the packer. The Hydro Perma-Pak has a large upper seal bore allowing the use of an anchor latch to create the largest possible I.D. through the packer and seals for completions requiring large tubing sizes. It can be converted to a temporary bridge plug with the addition of a knockout, pump out or threaded plug for temporary lower zone isolation-this plug can be used to apply the setting pressure.
features and benefits Hydraulic-set, by tubing pressure applied to a temporary plug set below the packer.
No rotation is required to set.
The anti-extrusion back-up rings expand to full casing I.D. to provide positive retention of the packing element.
A larger diameter upper seal bore accepts an anchor seal assembly to maximize thru bore.
Packing element options are available for high temperatures and H2S/CO2 applications.
�� Seal�materials�such�as�Kalrez,�Aflas,�Viton,�Teflon,�Ryton,�HNBR�and�Nitrile�are�available.
110112
Hydro Perma-Pak
sizeInches (mm)
Casing Weightlb/ft (kg/m)
Max O.d.Inches (mm)
Min i.d.Inches (mm)
PrOduCt nuMber
5.500 (139.70) 17.0-23.0 (25.3-34.2) 4.437 (112.70) 2.636 (69.95) T674-57B-000
5.500 (139.70) 17.0-23.0 (25.3-34.2) 4.437 (112.70) 2.636 (69.95) T674-57B-013
5.500 (139.70) 14.0-17.0 (20.8-25.3) 4.563 (115.90) 2.636 (69.95) T674-57A-000
5.500 (139.70) 14.0-17.0 (20.8-25.3) 4.563 (115.90) 2.636 (69.95) T674-57A-013
32
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents
DB Perma-Pak
The T-648 DB Perma-Pak packer is a versatile permanent seal bore packer which may be set on electric line or hydraulically depending on requirements. The DB Perma-Pak has a large upper seal bore allowing the largest possible I.D. through the packer and seals for completions requiring large tubing sizes. It is particularly suitable for use in stimulation jobs where excessive pressure and/or temperature conditions are anticipated. It can be converted to a temporary bridge plug with the addition of a knockout, pump out or threaded plug for temporary lower zone isolation. Threads, seal bores and packer tops are standardized to maximize their interchangeability with competitive seal bore equipment.
features and benefits Can be set on electric line or hydraulic setting tool.
The anti-extrusion back-up rings expand to full casing I.D. to provide positive retention of the packing element.
A larger diameter upper seal bore accepts an anchor seal assembly to maximize thru bore.
Packing element options are available for high temperatures and H2S/CO2 applications.
�� Seal�materials�such�as�Kalrez,�Aflas,�Viton,�Teflon,�Ryton,�HNBR�and�Nitrile�are�available.
110112
DB Perma-Pak
sizeInches (mm)
Casing Weightlb/ft (kg/m)
Max O.d.Inches (mm)
Min i.d.Inches (mm)
PrOduCt nuMber
3.500 (88.90) 7.7-10.2 (11.5-15.2) 2.770 (70.36) 1.370 (34.80) T648-35A-000
4.000 (101.60) 9.5-11.0 (14.1-16.4) 3.250 (82.55) 1.750 (44.45) T648-40A-000
5.000 (127.00) 15.0-18.0 (22.3-26.8) 3.968 (100.79) 2.500 (63.15) T648-50A-000
7.000 (177.80) 32.0-38.0 (47.6-56.5) 5.687 (144.45) 4.000 (101.60) T648-71C-000
7.000 (177.80) 26.0-29.0 (38.7-43.2) 5.875 (149.23) 4.000 (101.60) T648-71B-000
7.000 (177.80) 20.0-23.0 (29.8-34.2) 6.000 (152.40) 4.000 (101.60) T648-71A-000
33
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents 040912
Scorpion Packer
The Team T1125 Scorpion Packer is a permanent wireline set production packer with threaded
top and bottom connections of choice. It is designed to be run in conjunction with a T512 T-2
On/Off overshot and T510 T-2 On/Off stinger to simplify and speed up well completion. The
packer and stinger are made up together and run and set on electric wireline using a standard
wireline adapter kit, the tubing and overshot are then run, spaced out and landed using
standard techniques.
features and benefits Setting on electric wireline, using the combination of a power charge and a pressure
setting assembly, enables the packer to be accurately located in the well by correlation with well logs.
Allows placement of the packer in a much shorter time than tubular conveyed methods.
Simple and fast installation process.
Releasing the tubing from the packer requires only a ¼ turn at the packer.
The seals are retained in the overshot rather than exposed as in standard seal assemblies.
Available in sizes 4-1/2” thru 7” and a standard pressure rating of 10,000psi.
Available for standard service with Nitrile packing elements.
�� Available�for�sour�service�with�an�Aflas�Ecner�array�packing�element.
�� Stinger�can�be�supplied�with�a�variety�of�profiles�for�landing�plugs�etc.
Full circle slips allow for fast run in time.
Scorpion Packer
sizeInches (mm)
Casing Weightlb/ft (kg/m)
Max O.d.Inches (mm)
Min i.d.Inches (mm)
PrOduCt nuMber
4.500 (114.30) 13.5-15.1 (20.1-24.5) 3.600 (91.44) 2.000 (50.80) T1125-44B-000
5.000 (127.00) 20.3-23.2 (30.2-34.5) 3.875 (98.43) 2.000 (50.80) T1125-50C-020
5.000 (127.00) 20.3-23.2 (30.2-34.5) 3.875 (98.43) 1.930 (49.02) T1125-50C-021
5.000 (127.00) 15.0-18.0 (22.3-26.8) 3.969 (100.81) 1.938 (49.23) T1125-50A-020
5.500 (139.70) 20.0-23.0 (29.8-34.2) 4.437 (112.70) 2.000 (50.80) T1125-55B-020
5.500 (139.70) 20.0-23.0 (29.8-34.2) 4.437 (112.70) 2.000 (50.80) T1125-56B-020
7.000 (177.80) 23.0-32.0 (34.2-47.6) 5.687 (144.45) 2.484 (63.09) T1125-70B-000
34
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents 040512
H/D Tubing Anchor Catcher
The T312 H/D Tubing Anchor Catcher is a heavy duty rationally activated tool used to prevent
vertical movement of the tubing string. The H/D Anchor uses drag blocks in place of friction
springs allowing for better torque resistance and longevity. The H/D Anchor sets to the left,
releases to the right or can be shear released with an easily adjustable shear release system.
The H/D Anchor can also be special ordered for right hand set, left hand release with Team
Torque slips allowing the tool to be with progressive cavity pumps..
features and benefits Drag block design for durability and torque
Easily adjustable shear release mechanism
Full bore design
Available in right hand set for PCP applications
HD Tubing Anchor Catcher
sizeInches (mm)
Casing Weightlb/ft (kg/m)
Max O.d.Inches (mm)
Min i.d.Inches (mm)
PrOduCt nuMber
4.500 (114.30) 9.5-13.5 (14.1-20.1) 3.750 (95.25) 2.000 (50.80) T312-45A-000
5.000 (127.00) 11.5-15.0 (17.1-22.3) 4.000 (101.60) 2.000 (50.80) T312-50A-000
5.000 (127.00) 18.0-20.8 (26.8-31.0) 4.125 (104.77) 2.000 (50.80) T312-50B-000
5.500 (139.70) 13.0-20.0 (19.3-29.8) 4.625 (117.47) 2.000 (50.80) T312-55A-000
5.500 (139.70) 20.0-23.0 (29.8-34.2) 4.500 (114.30) 2.000 (50.80) T312-55B-000
5.500 (139.70) 13.0-20.0 (19.3-29.8) 4.625 (117.47) 2.500 (63.50) T312-56A-000
5.500 (139.70) 20.0-23.0 (29.8-34.2) 4.500 (114.30) 2.500 (63.50) T312-56B-000
7.000 (177.80) 17.0-38.0 (25.3-56.5) 5.750 (146.10) 2.500 (63.50) T312-70A-000
35
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents 040512
RT Anchor / Catcher
The T354 RT Anchor Catcher was developed to run with a progressive cavity pump on
fiberglass tubing string. The unique slip design allows the anchor to grip the casing wall
when right hand rotation is applied and prevents any right handed torque. The RT Anchor
Catcher sets to the right, releases to the let or straight pull of the tubing string will engage the
adjustable shear safety release mechanism.
features and benefits Vertically cut wicker slip allows right hand torque
Reduces wear on tubing string
Right hand set, left hand release or shear release
Parts interchangeable with standard tool
Sturdy stainless steel drag springs
RT Anchor Catcher
sizeInches (mm)
Casing Weightlb/ft (kg/m)
tubing sizeInches (mm)
Min O.d.Inches (mm)
PrOduCt nuMber
4.500 (114.30) 9.5-13.5 (14.1-20.1) 3.750 (95.25) 2.000 (50.80) T354-45A-000
5.500 (139.70) 13.0-23.0 (19.3-34.2) 4.500 (114.30) 2.000 (50.80) T354-55A-000
5.500 (139.70) 13.0-23.0 (19.3-34.2) 4.500 (114.30) 2.375 (60.30) T354-56A-000
7.000 (177.80) 17.0-35.0 (25.3-52.1) 5.875 (149.20) 2.500 (63.50) T354-70A-000
7.000 (177.80) 17.0-35.0 (25.3-52.1) 5.875 (149.20) 2.000 (50.80) T354-71A-000
36
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents 041012
T-2 On/Off Tool Stinger
The T510 T-2 ON/OFF TOOL STINGERS are used to disconnect the tubing string from a
packer. The stingers are used with the T512 T-2 Overshot and are available in a variety
of profile types, sizes and from a broad range of material types.
37
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents 041012
T-2 On/Off Connector
The T-2 On/Off Connector was designed to disconnect and connect the tubing string from/
to a double grip production packer, such as the AS1-X, that does not require tension or
compression to maintain a pack-off. It consists of two components, the T510 Stinger and the
T512 Overshot and it can be used in treating, fracing, testing and production applications.
The Stinger can be supplied with an internal profile of choice to accept a wireline plug and
the complete tool is available in a broad range of materials to suit standard or sour service
applications to 10,000psi with seal materials suitable for up to 425ºF.
features and benefits Fully field tested and proven bonded seal system
Designed for strength and durability
Stinger profile nipple can be supplied as specified by client.
Available in metallurgy to suit standard, sour and high temperature applications.
Can be supplied shear pinned in the up or down position
As an alternative a spring loaded design is available.
T-2 On/Off Connector
sizeInches (mm)
Max O.d.Inches (mm)
Min i.d.Inches (mm)
teMp. rating°F (°C)
pressure ratingPsi (bar)
prOduct nuMber
5.500 (139.70) 4.500 (114.30) 1.984 (50.39) 300 (148.89) 10,000 (689.48) T512-55A-010
5.500 (139.70) 4.500 (114.30) 2.484 (63.09) 300 (148.89) 10,000 (689.48) T512-56A-010
38
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents 041012
T-2 Type “H” On/Off Tool
The T513 T-2 Type “H” On/Off Tool is used in liner applications to disconnect the liner from the
tubing string. The overshot is the liner top or guide, while the stinger is used for the running
tool. The seals have been relocated to the stinger allowing the seal to be replaced.
T-2 Type “H” On/Off Tool
SizeInches (mm)
Max O.D.Inches (mm)
Min i.D.Inches (mm)
ThreaD COnneCTiOn Inches
PrODuCT nuMber
4.500 (114.30) 3.750 (95.25) 2.375 (60.30) 2-3/8 EUE 8RD T513-46A-000
39
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents 041012
RH Rotational Safety Joint
The T568 Rotational Safety Joint provides for emergency release of the tubing string. The RH
Rotational Safety Joint uses larger square left- hand threads to separate the upper and lower
subs with right-hand rotation abandoning any production equipment below.
RH Rotational Safety Joint
SizeInches (mm)
Max O.D.Inches (mm)
Min i.D.Inches (mm)
ThreaD COnneCTiOn Inches
PrODuCT nuMber
1.660 (42.20) 2.220 (56.40) 1.375 (34.90) 1.660 EUE 10RD T568-16A-000
1.900 (48.30) 2.500 (63.50) 1.500 (38.10) 1.900 EUE 10RD T568-19A-000
2.375 (60.30) 3.062 (77.80) 2.000 (50.80) 2.375 EUE 8RD T568-20A-000
2.875 (73.00) 3.688 (93.70) 2.500 (63.50) 2.875 EUE 8RD T568-25A-000
3.500 (88.90) 4.500 (114.30) 3.000 (76.20) 3.500 EUE 8RD T568-35A-000
40
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents 041012
Model “K” Shear Safety Joint
The T569 Model ‘K” Shear Safety Joint provides for emergency release of the tubing string.
Straight pull separates the tool at a predetermined shear value. The Model “K” Shear Safety
Joint allows torque to be transmitted through the tool without affecting the shear screws.
features and benefits Available in premium materials.
Available with premium thread connections.
�� Shear�value�field�adjustable.
Additional sizes available on request.
Model "K" Shear Safety Joint
sizeInches (mm)
Max O.d.Inches (mm)
Min i.d.Inches (mm)
PrOduct nuMber
2.375 (60.33) 3.067 (77.90) 1.985 (50.42) T569-20A-020
2.875 (73.03) 3.640 (92.46) 2.485 (63.12) T569-25A-020
3.500 (88.90) 4.510 (114.55) 2.985 (75.82) T569-35A-020
4.500 (114.30) 5.500 (139.70) 3.985 (101.22) T569-45A-020
41
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents 041012
Telescoping Swivel Joint
The TEAM T572 Telescoping Swivel Joint is designed for use in multi string packer completions
to facilitate their assembly. It allows easy makeup of the tubing by allowing both rotation and
telescoping of its top and bottom sub relative to each other. The standard tool can telescope up
to 24 inches but it can be furnished in various lengths, upon request to suit specific completion
requirements.
features and benefits Available in N-80 or L-80 material as standard, premium materials supplied on request.
Available with API threads as standard but premium threads can be provided as needed.
Nitrile seals are supplied as standard but premium seals are available as required.
Standard telescoping length is 24 inches.
Telecoping Swivel Joint
sizeInches (mm)
Max O.d.Inches (mm)
Min i.d.Inches (mm)
strOke lengthInches (mm)
PrOduct nuMber
2.375 (60.33) 3.068 (77.93) 1.985 (50.42) 24.000 (609.60) T572-20A-024
2.375 (60.33) 3.068 (77.93) 1.985 (50.42) 36.000 (914.40) T572-20A-036
2.375 (60.33) 3.673 (93.29) 2.485 (63.12) 24.000 (609.60) T572-25A-024
2.875 (73.03) 3.673 (93.29) 2.485 (63.12) 42.000 (1066.80) T572-25A-042
42
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents 041012
PBR
The T-585 TEAM PBR Polished Bore Receptacle is used in a well completion to provide a means
of sealing the tubing to the top of the production packer while maintaining maximum ID. It can
accept either a latching type or locator seal assembly. It is made up to the top of the packer
and provides an upper seal bore to allow tubing retrieval without releasing the packer. The
PBR is run with the seal assembly in place. Following tubing retrieval, the PBR can be released
from the packer using the pulling tool and right-hand rotation.
features and benefits Available with premium thread down.
Available in premium materials.
Equipped with standard nitrile seals.
Premium seals available upon request.
Upper Right-hand box thread to allow right-hand rotation to release PBR from the packer.
After packer setting and testing the locator seal assembly is released by straight pull on the tubing to shear the screws and allow space out.
Can accommodate locator seal assemblies.
Available in 5, 10, 15 and 20 foot lengths.
Allows tubing retrieval while leaving the packer and PBR in place.
Allows subsequent PBR retrieval with right-hand rotation pulling tool.
PBR
sizeInches (mm)
Max O.d.Inches (mm)
Min i.d.Inches (mm)
Pbr LengthFeet (m)
Max strOke LengthFeet (m)
PrOduct nuMber
4.750 (120.65) 5.750 (146.05) 3.875 (98.43) 5.000 (1.594) 3.500 (1.067) T585-47-005
4.750 (120.65) 5.750 (146.05) 3.875 (98.43) 10.000 (3.048) 8.500 (2.591) T585-47-010
4.750 (120.65) 5.750 (146.05) 3.875 (98.43) 15.000 (4.572) 13.500 (4.115) T585-47-015
4.750 (120.65) 5.750 (146.05) 3.875 (98.43) 20.000 (6.096) 18.500 (5.639) T585-47-020
43
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents 041012
Packer Tubing Accessories
The T597 Model A Pump-out Plug Assembly is used below a production packer or tailpipe.
The assembly holds pressure from below and unseats with a predetermined amount of tubing
pressure.
The T597 Model A Pump-out Plug Assembly is used below a production packer or tailpipe.
The assembly holds pressure from below and unseats with a predetermined amount of tubing
pressure. The AR pump out plug assembly is recommended when running into liners or highly
deviated wells.
The T597 Model A Pump-out Plug Assembly is used below a production packer to test tubing
integrity or to activate a hydraulic set packer. The Model ES allows fluid flow from both
directions until a 1-3/8 Diameter ball is gravitated down into the landing seat. Pressure applied
to tubing string will shear out ball and seat at a predetermined pressure rating.
T597 Model A Pump-Out Plug
Thread ConneCTion Inches
Max o.d.Inches (mm)
SeaT i.d.Inches (mm)
Body i.d.Inches (mm)
2.375 EUE 3.250 (82.55) 1.000 (25.00) 2.000 (25.40)
2.875 EUE 4.250 (107.95) 1.187 (30.00) 2.500 (30.15)
3.500 EUE 4.500 (114.30) 1.187 (31.75) 3.000 (30.15)
T597 Model A Pump-Out Plug
Thread ConneCTion Inches
Max o.d.Inches (mm)
Min i.d.Inches (mm)
1.660 EUE 2.220 (56.40) 1.250 (31.75)
1.900 EUE 2.500 (63.50) 1.500 (38.10)
2.375 EUE 3.062 (77.80) 2.000 (50.80)
2.875 EUE 3.750 (95.25) 2.500 (63.50)
3.500 EUE 4.500 (114.30) 3.000 (76.20)
T597 Model A Pump-Out Plug
Thread ConneCTion Inches
Max o.d.Inches (mm)
Min i.d.Inches (mm)
1.660 EUE 2.220 (56.40) 1.250 (31.75)
1.900 EUE 2.500 (63.50) 1.500 (38.10)
2.375 EUE 3.062 (77.80) 2.000 (50.80)
2.875 EUE 3.750 (95.25) 2.500 (63.50)
3.500 EUE 4.500 (114.30) 3.000 (76.20)
44
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents 041012
Wireline Adapter KitF/ASI-X, PATRIOT & Scorpion Retrievable Packers
The T598 Wireline Adapter Kit is used as the interface between the Patriot or the ASI-
XW retrievable packer to enable them to be set in place using standard pressure setting
assemblies.
features and benefits Setting on electric wireline, using the combination of a power charge and a pressure
setting assembly, enables packer to be accurately located in the well by correlating their position with well logs.
May be set with industry standard E-Line or Hydraulic Setting Tools.
Simple to install with only three major parts – no special tools required.
Allows packer placement in a much shorter time than by using tubular conveyed methods.
Wireline Adapter Kit
sizeInches (mm)
Max O.d.Inches (mm)
use With Packer
setting tOOl
PrOduct nuMber
3.500 (88.90) 2.770 (70.35) ASI-XW 1.6875 “ ”GO” T598-35A-000
4.000 (101.60) 3.187 (80.95) ASI-XW E-4, #10 T598-40A-000
4.500 (114.30) 3.656 (92.86) ASI-XW E-4, #10 T598-45B-000
4.500 (114.30) 3.755 (95.38) ASI-XW E-4, #10 T598-45A-000
4.500 (114.30) 3.755 (95.38) Patriot / Scorpion E-4, #10 T598-45A-020
5.000 (127.00) 3.750 (95.25) Patriot / Scorpion E-4, #10 T598-50C-025
5.500 (139.70) 4.516 (114.71) ASI-XW E-4, #20 T598-55A-000
5.500 (139.70) 4.406 (111.91) ASI-XW E-4, #20 T598-56E-000
5.500 (139.70) 4.516 (114.71) ASI-XW / Patriot E-4, #20 T598-56A-000
7.00 (177.80) 4.516 (114.71) ASI-XW / Patriot E-4, #20 T598-70A-020
7.00 (177.80) 5.500 (139.70) Patriot E-4, #20 T598-73A-000
8.625 (219.08) 5.516 (140.11) Patriot E-4, #20 T598-86A-000
9.625 (244.48) 6.255 (158.88) Patriot E-4, #20 T598-95A-020
45
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents 041012
VIPER™ II Composite Bridge & Frac Plug
The VIPER™ II utilizes a unique combination of composite components to provide a dependable,
durable and cost-effective design for temporary zone isolation during stage fracs in both
vertical and horizontal wells. VIPER™ II plugs are constructed primarily from molded or
machined composites, with cast iron slips, ensuring fast drill time while remaining highly
reliable.
The VIPER™ II is a multi-configuration plug that allows a user to convert the tool from a Ball
Drop to a Caged Ball or Bridge plug in minutes. This conversion is easily accomplished using
hand tools and simple kits (Bridging Pin or Caged Ball Assembly).
The setting sleeve and shear adapter are designed to be run on any wireline setting tool or
tubing-run hydraulic setting tool, with Baker #10, Baker #20, or 3.500” G.O. connections. The
two piece setting sleeve utilizes an adjuster nut that mates directly to the setting tool. The
shear sleeve adapter is also designed to allow the drop ball to be placed inside the adapter.
This gives the user the choice to utilize the plug in the flow back configuration without having to
drop and pump the ball down from the surface.
features and benefits Available in 4.500”, 5.500” and 7.000”. Other sizes pending.
Standard plug is 10K: 6K & 8K rated versions also available.
Sets securely in casing up to P-110 grade.
Consistent drill times of 13-20 minutes or less.
Utilizes unique “lug” design on the top and muleshoe bottom ensuring plugs do not spin during drill out.
Can be drilled out using conventional rigid tubing or coiled tubing.
Materials used in construction are conducive to a wide range of environments.
Slips are hardened to wicker depth only for ease of drill out.
Pump down wiper available upon request.
46
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents 041012
VIPER™ II Composite Bridge & Frac Plug
VIPER™ II Composite Bridge & Frac Plug
casing sizeInches (mm)
casing Weightlbs/ft (kg/m)
pressure ratingPSI (bar)
temp. rating°F (°C)
tool max o.d.Inches (mm)
drop ball frac plug
caged ball frac plug
bridgeplug
3.500 (88.90) 9.2 - 12.95 (13.69 - 19.27) 10,000 (689.48) 300 (148.89) 2.725 (69.22) ECFP-3500-002 ECFP-3500-002CB ECBP-3500-002
4.500 (114.30) 15.1 - 17.1 (22.47 - 25.44) 8,000 (551.58) 275 (135.00) 3.440 (87.38) ECFP-4400-001 ECFP-4400-001CB ECBP-4400-001
4.500 (114.30) 15.1 - 17.1 (22.47 - 25.44) 10,000 (689.48) 300 (148.89) 3.440 (87.38) ECFP-4400-002 ECFP-4400-002CB ECBP-4400-002
4.500 (114.30) 15.1 - 17.1 (22.47 - 25.44) 10,000 (689.48) 350 (176.67) 3.440 (87.38) ECFP-4400-003 ECFP-4400-003CB ECBP-4400-003
4.500 (114.30) 9.5 - 15.1 (14.14 - 22.47) 6,000 (413.69) 250 (121.11) 3.609 (91.67) ECFP-4500-000 ECFP-4500-000CB ECBP-4500-000
4.500 (114.30) 9.5 - 15.1 (14.14 - 22.47) 8,000 (551.58) 275 (135.00) 3.609 (91.67) ECFP-4500-001 ECFP-4500-001CB ECBP-4500-001
4.500 (114.30) 9.5 - 15.1 (14.14 - 22.47) 10,000 (689.48) 300 (148.89) 3.609 (91.67) ECFP-4500-002 ECFP-4500-002CB ECBP-4500-002
4.500 (114.30) 9.5 - 15.1 (14.14 - 22.47) 10,000 (689.48) 350 (176.67) 3.609 (91.67) ECFP-4500-003 ECFP-4500-003CB ECBP-4500-003
5.500 (139.70) 13.0 - 23.0 (11.51 - 34.22) 6,000 (413.69) 250 (121.11) 4.425 (112.40) ECFP-5500-000 ECFP-5500-000CB ECBP-5500-000
5.500 (139.70) 13.0 - 23.0 (11.51 - 34.22) 8,000 (551.58) 275 (135.00) 4.425 (112.40) ECFP-5500-001 ECFP-5500-001CB ECBP-5500-001
5.500 (139.70) 13.0 - 23.0 (11.51 - 34.22) 10,000 (689.48) 300 (148.89) 4.425 (112.40) ECFP-5500-002 ECFP-5500-002CB ECBP-5500-002
5.500 (139.70) 13.0 - 23.0 (11.51 - 34.22) 10,000 (689.48) 350 (176.67) 4.425 (112.40) ECFP-5500-003 ECFP-5500-003CB ECBP-5500-003
7.000 (177,80) 23.0 - 38.0 (34.22 - 56.54) 8,000 (551.58) 275 (135.00) 5.635 (143.13) ECFP-7000-001 ECFP-7000-001CB ECBP-7000-001
7.000 (177,80) 23.0 - 38.0 (34.22 - 56.54) 10,000 (689.48) 300 (148.89) 5.635 (143.13) ECFP-7000-002 ECFP-7000-002CB ECBP-7000-002
7.000 (177,80) 17.0 - 23.0 (25.30 - 34.22) 8,000 (551.58) 275 (135.00) 6.005 (152.53) ECFP-7100-001 ECFP-7100-001CB ECBP-7100-001
7.000 (177,80) 17.0 - 23.0 (25.30 - 34.22) 10,000 (689.48) 300 (148.89) 6.005 (152.53) ECFP-7100-002 ECFP-7100-002CB ECBP-7100-002
47
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents 041012
Elastomer Guide
3 Element Retrievable Packing System Selection Chart
element system
compound temp. rating°F
environment
H2S CO2 Bromides Amines
80-60-80 Nitrile Ambient - 200 NO 5% Max** NO NO
80-70-80 Nitrile Ambient - 225 NO 5% Max** NO NO
90-70-90 Nitrile * Ambient - 250 NO 5% Max** NO NO
90-80-90 Nitrile 250 - 300 NO 5% Max** NO NO
90-80-90 HNBR 250 - 350 NO 5% Max** NO NO
80-70-80 Flourel *** Ambient - 350 OK OK OK NO
90-80-90 Aflas *** 225 - 450 OK OK OK OK
Permanent Packing Element Selection Chart
packer sizeInches
compound temp. rating°F
environment
H2S CO2 Bromides Amines
4.500 - 13.375 70 Duro Nitrile Ambient - 175 10% OK OK * OK
4.500 - 13.375 80 Duro Nitrile 175 - 275 10% OK NO OK
4.500 - 13.375 90 Duro Nitrile 200 - 300 10% OK NO OK
4.500 - 13.375 80 Duro HNBR 200 - 300 10% OK NO OK
4.500 - 13.375 90 Duro HNBR 200 - 350 10% OK NO OK
4.500 - 13.375 Flourel ** Ambient - 450 20% OK OK NO
4.500 - 13.375 Aflas ** 225 - 450 20% OK OK OK
* Standard Element System.
** Re-Settability may be diminshed in CO2.
*** Special anit-extrusion back-ups are necessary.
* Nitrile can be used up to 175 degree fahrenheit in Bromides with limited exposure.
** Special anti-extrusion system is recommended over 200 degree Fahrenheit.
48
On Common Ground
For more information, go to TeamOilTools.com or call 281.602.7815© 2012 TEAM Oil Tools. All rights reserved. Patents: www.teamoiltools.com/Innovation/TEAM-Patents 041012
Elastomer Guide
Seal Stack Rating / Selection Chart
sealstack
max pressure rating (PSI)
maxtemp. °F
environment
H2S CO2 Bromides Amines Oil Brine Water
Bonded Nitrile 10,000 300 NO OK NO NO OK OK OK
Bonded HNBR 10,000 350 NO OK NO NO OK OK OK
Bonded Flourel 5,000 300 5% OK OK NO OK OK OK
Bonded Flourel 10,000 250 5% OK OK NO OK OK OK
Cheveron Nitrile * 10,000 300 NO OK NO NO OK OK OK
Cheveron Flourel * 5,000 300 5% OK OK NO OK OK OK
Cheveron Flourel * 10,000 250 5% OK OK NO OK OK OK
VTR * 15,000 300 15% OK OK NO OK OK OK
VTR * 15,000 400 5% OK OK NO OK OK OK
RTR * 10,000 400 15% OK OK OK OK OK OK
RTR * 10,000 450 5% OK OK OK OK OK OK
ATR * 15,000 300 20% OK OK OK NO ** OK OK
ATR * 15,000 400 5% OK OK OK NO ** OK OK
AKTM * 15,000 550 OK OK OK OK OK OK OK
* Recommended not to leave the seal bore during service.
** Restriction for stab-in installations only.
49
© 2012 TEAM Oil Tools. All rights reserved.
www.teamoiltools.com
© 2012 TEAM Oil Tools. All rights reserved.
On Common Ground
www.teamoiltools.com