PRODUCTION AND TEST PACKER RETRIEVABLE____________________________________________________BOTIL MODEL “BM” MECHANICALSET PACKERProduct No. BI 643-01

DESCRIPTION & APPLICATIONThe BOTIL Model “BM” is mechanical setretrievable high performance productionPacker. It is designed to meet the demandsof high pressure fracturing procedures, aswell as production applications. The Packeris set in compression, allowing finalpositioning in compression, tension orneutral.

FEATURES/BENEFITS

Ease of setting and release, onefourth turn right-hand rotation to set,one – forth right-hand rotation torelease

Superior sealing system with threeelement stack

Independent lower and upper JayAssemblies contributing to short,compact design

No O-ring required Built in un loader with bonded deal

for bypass Bypass opens before release of

upper slips for safety and ease ofrelease

Rated to 10,000 psi @ 350°F Fully tested in minimum to maximum

API tolerances for each specifiedcasing weight

Temperature tested with multiplePressure reversals

Tension loads compatible withtubing string @ 10,000 psi

Staged upper slip release with solidupper cone

Full tubing ID Packer bore

SPECIFICATION GUIDECasing Packer Casing

OD WeightRange

PackerSize

GageRing OD

PackerI.D.

Min ID Max ID

In. mm (lb/ft) In. In. In. In.

5-1/2” 139.720-23 45A2 4.500

2.375

4.578 4.86817-20 45A4 4.600 4.696 4.976

15.5-17 45B 4.720 4.819 5.031

7” 177.826-29 47B2 6.174 6.174 6.38123-26 47B4 6.256 6.266 6.46620-23 47B 6.239 6.239 6.570

62.I

PRODUCTION AND TEST PACKER RETRIEVABLE

____________________________________________________ BOTIL MODEL “BTCN” MECHANICAL SET PACKER Product No. BI 643-02 DESCRIPTION & APPLICATION The Botil Model “BTCN” Retrievable Production Packer meets several zone isolation, production, and injection requirements. Full opening design gives unrestricted flow and allows Wireline tools to pass. Mechanical lock-setting action holds substantial pressure from above or below without tubing weight or tension. No hydraulic anchor is required to prevent packer movement, even with differential pressures. Packer’s ability to absorb tubing expansion or contraction forces makes the “BTCN” right for both pumping and injection wells. The large internal bypass reduces swabbing effect when running-in or retrieving. When packer is set, by pass is automatically sealed. The “BTCN” also features of upper slip releasing system that reduces the strain required to release the slips by dislocating a key non-directional slip first which automatically releases the other slips. this mechanical feature replaces the hold down system found in other tools making it independent of pressure variations.

FEATURE & BENEFITS:

Tension set for shallow applications

Three assemblies are available; small bore, large bore and high pressure

Can leave the tubing in a tension, compression or neutral condition

Holds pressure from above or below

Right hand set, right hand release

jay setting and releasing mechanism

internal by-pass internal pressure unloader seal

is located below the upper slips; this allows debris to be flushed away from hold-down slips before releasing

PRODUCTION AND TEST PACKER RETRIEVABLE

____________________________________________________ SPECIFICATION GUIDE

CASING CASING ID RANGE MAX

OD OF

TOOL

PACKER

BORE

THREAD CONNECTIO

N BOX UP/

PIN DOWN

PACKER SIZE SIZE

WEIGHT (LBS/FT)

MIN (IN)

MAX

(IN)

5 1/2

20-23 4.629 4.852 4.500 2.000 2 3/8 EU 8 RD 450-200 14-17 4.851 5.075 4.625 462-200

15.5-17 4.851 5.016 2.375 2 7/8 EU 8 RD 462-237 20-23 4.629 4.852 4.500 450-237

7

29-35 5.952 6.237 5.812 2.500 2 7/8 EU 8 RD

581-250 26-32 6.042 6.342 5.875 587-250 17-26 6.224 6.611 6.000 600-250 26-32 6.042 6.361 5.875 3.000 3 1/2 EU 8 RD 587-300 17-26 6.224 6.611 6.000 600-300

9 5/8 43.5-53.5 8.463 8.866 8.250 4.000 4 1/2 EU 8 RD 825-400 32.3-43.5 8.683 9.101 8.500 850-400

PRODUCTION AND TEST PACKER RETRIEVABLE

____________________________________________________ BOTIL MODEL “BTCN-1” MECHANICAL SET PACKER Product No. BI 643-03 DESCRIPTION & APPLICATION The Botil Model “BTCN-1” Retrievable Production Packer meets several zone isolation, production, and injection requirements. Full opening design gives unrestricted flow and allows Wireline tools to pass. Mechanical lock-setting action holds substantial pressure from above or below without tubing weight or tension. No hydraulic anchor is required to prevent packer movement, even with differential pressures. Packer’s ability to absorb tubing expansion or contraction forces makes the “BTCN-1” right for both pumping and injection wells. The large internal bypass reduces swabbing effect when running-in or retrieving. When packer is set, by pass is automatically sealed. The “BTCN-1” also features of upper slip releasing system that reduces the strain required to release the slips by dislocating a key non-directional slip first which automatically releases the other slips. this mechanical feature replaces the hold down system found in other tools making it independent of pressure variations.

FEATURE & BENEFITS:

Tension set for shallow applications

Three assemblies are available; small bore, large bore and high pressure

Can leave the tubing in a tension, compression or neutral condition

Holds pressure from above or below

Right hand set, right hand release

jay setting and releasing mechanism

internal by-pass internal pressure unloader seal

is located below the upper slips; this allows debris to be flushed away from hold-down slips before releasing

PRODUCTION AND TEST PACKER RETRIEVABLE

____________________________________________________ SPECIFICATION GUIDE

CASING CASING ID RANGE MAX

OD OF

TOOL

PACKER

BORE

THREAD CONNECTIO

N BOX UP/

PIN DOWN

PACKER SIZE SIZE

WEIGHT (LBS/FT)

MIN (IN)

MAX

(IN)

5 1/2

20-23 4.629 4.852 4.500 2.000 2 3/8 EU 8 RD 450-200 14-17 4.851 5.075 4.625 462-200

15.5-17 4.851 5.016 2.375 2 7/8 EU 8 RD 462-237 20-23 4.629 4.852 4.500 450-237

7

29-35 5.952 6.237 5.812 2.500 2 7/8 EU 8 RD

581-250 26-32 6.042 6.342 5.875 587-250 17-26 6.224 6.611 6.000 600-250 26-32 6.042 6.361 5.875 3.000 3 1/2 EU 8 RD 587-300 17-26 6.224 6.611 6.000 600-300

9 5/8 43.5-53.5 8.463 8.866 8.250 4.000 4 1/2 EU 8 RD 825-400 32.3-43.5 8.683 9.101 8.500 850-400

MODEL ‘BHRL’ HYDRAULIC RETRIEVABLE PACKER MODEL ‘BHRL’ HYDRAULIC RETRIEVABLE PACKER PRODUCT No. BI 646-90 DESCRIPTION: Botil Model ‘BHRL’ is a hydraulically set, straight-pull, shear release retrievable packer. It is used in vertical and deviated wellbore or in application in which single or multiple packers are set after the wellhead has been installed. A modular shell and body design for low to medium pressure differentials allows configuration as a single-string production packer. Its compact, modular design makes the BHRL an economical choice for production applications. The BHRL is installed with the completion tubing and is set by applying pressure to the tubing. Retrieval of the BHRL is accomplished with a straight upward pull on the tubing. Once the tension on the tubing string exceeds the shear value of the release pins, the slips disengage the casing, and the element relaxes. Set at the factory to a standard value, the packer-shear release mechanism can be adjusted in the field just before installation. FEATURES: • No Tubing Manipulation required while setting of the Packer. The Packer

can be set after the well is flanged up and the tubing is displaced. • Opposed Double grip slips (Bi-Directional) prevent movement of the

Packer in either direction due to pressure differentials. • Large Flow Path ID. • Straight pull shear release. • Adjustable shear release. • Field proven sealing element • Minimized end effect on shear-release screws. • Slips located below the Packing Elements. • Double Piston design prevents tubing movement while setting. • Double Lock ring sustain Pack-off and Slip grip mechanically after setting.

BENEFITS: • Simplified operations reduce rig costs. • Eliminates tubing movement during installation. • Prevents debris build up above slips. • Facilitates circulating out debris before retrieval. • Positive casing grip secures packer.

MODEL ‘BHRL’ HYDRAULIC RETRIEVABLE PACKER

APPLICATIONS: • Single string completion • Zonal Isolation. • Vertical, deviated or horizontal well bores.

SPECIFICATION GUIDE:

Casing Size

Casing Weight

Max O.D Packer I.D* * Differential Rating(Psi)

Min. tubing Setting

Pressure(psi) 7 23-26 6.090 2.426,2.992 7,000

3500

7 26-29 6.000 2.426,2.992 7,000 7 29-32 5.910 2.426,2.992 7,000 7 32-35 5.850 2.426,2.992 7,000

7 5/8 24-29.7 6.690 2.992 7,000 3000 7 5/8 33.7-39 6.440 2.992 7,000

9 5/8 40-47 8.463 2.992,3.910,4.733 7,000 3000 9 5/8 47-53.5 8.354 2.929,3.910,4.733 7,000

** I.D may vary depending on End connection selected.

PRODUCTION AND TEST PACKER RETRIEVABLE____________________________________________________BOTIL MODEL NON ROTATIONALSHEAR OUT SAFETY JOINTProduct No. BI 441-32

DESCRIPTION & APPLICATION

The BOTIL Non Rotational Shear-OutSafety Joint is used between packers indual and triple completions and in selectivecompletions using Hydrostatic Single-StringPackers. It is also used when rotationalreleasing is not desired. When run abovethe upper packer in a single-stringcompletion, however, the shear valueshould be adjusted to compensate for anyhydraulic conditions that exist when thestring is landed, or that are created by welltreating operations. This Model has Torquetransmission feature.

BOTIL MODEL “BNC” STORM VALVEProduct No. BI 442-10

DESCRIPTION & APPLICATION

The BOTIL Model “BNC” Storm Valve is runabove the compression set service packerto isolate the tubing below the packer fordisconnection during weather emergency orsurface equipment repair.

The running string is disconnected by 15 leftturns, and then the valve closesautomatically. This quick, safe, costeffective well closing requires no tubingpulling. The valve has an expandable plugthat provides through bore access forcirculation or wireline passage. After thestring is reconnected, the valve opensautomatically to equalize pressure forpacker retrieval.

FEATURES/BENEFITS

Weather emergencies Wellhead repair The rugged alloy-steel construction

ensures dependability The simple, field proven design

eases valve operation andredressing

The expandable plug providesthrough bore access for circulationand wirelines.

The valve equalizes automaticallyduring string reconnection, enablingfast packer retrieval.

81.I