COMPANY PROFILE

Delta Group

Delta Engineering

Cosmec Elfor Controls

Who we are

Where we are

Total Area 30.000 m2

Covered Area Carbon Steel 7.000 m2

Covered Area Stainless Steel 2.000 m2

Covered Test Area 1.000 m2

Location

1981Constitution Date

1992Cosmec Acquisition

ISO 9001 Quality System

1995Filtration Department

2005Sales Expansion in

Mediterranean Basin & Europe

2010World Market Expansion

2013Elfor Controls Acquisition

Group History

Elfor Controls was born in the ’70 following the increasing demand of Valve

Automation products in various industrial sectors. Consequently Elfor Controls

started to develop its first range of electric actuators and later the company

expanded to increase its offering capability and to engineer a wide range of

Pneumatic & Hydraulic Actuators equipped with their relevant control systems.

From 2006 to 2014 the company went through a radical renewal, during which

time it was incorporated into the Delta Engineering Group, and now includes

the following RANGE OF PRODUCTS from it’s new office and factory in Dalmine,

Italy, making it a world leader.

Elfor Controls History

Scotch-Yoke Hydraulic & Pneumatic Actuators

Linear Hydraulic & Pneumatic Actuators

Electro – Hydraulic Actuators

Rack & Pinion Pneumatic Actuators

Electric ¼ turn and multi-turn Actuators

Manual Gearboxes

Positioners

Limit Switches

Control Panels, Solenoid Valves & accessories

Product Range

The Company has the capability to provide the complete package:

Valve + Actuator and Control System Assembly

Elfor Controls actuators can be provided either with Scotch Yoke (symmetricalor canted) or Rack and Pinion mechanisms.Our actuators are suitable for a wide range of applications and are primarilysupplied in the following markets:

Oil & Gas Chemical & Petrochemical Process Industry Water Treatment LNG Plants

Activity

Excellent Quality

Short deliveries

Customised solutions

Short reaction to Customers needs

Flexibilty

Prompt and professional pre/after Sales Service

Full package Valve + Actuator + Control System

Service for valves and Actuators

Our Strenghts

ELFOR CONTROLS strongly believes that the greater the level of service, the higher the customer satisfaction, and we are pleased to introduce you to ourformula to achieve this:

Excellent Quality +Customized Solutions +

Short Delivery =

Total Customer Satisfaction

Our Philosophy

Certification

Certification

Steel Industry Biomass GeoThermal

Oil & Gas Power Generation Water Treatment

Market Sectors

Our Products

Elfor Controls Rack & Pinion Actuators are Quarter-turn (Models 052 to 270).

Available in 10 models, either spring return or double acting.

Compact Aluminium construction and economical.

The ideal solution for small to medium valve service.

Operating pressure range from 3 to 8 bar.

Stainless Steel versions also available upon request

Output Torque Range 7 to 2900 Nm

Rack & PinionActuators

Elfor Controls Electric Actuators are Quarter-turn (Models AFG1-AFG2) and Multi-Turn (Models SEM10-SEM50).

SEM10 / SEM50 Key Features: AFG1 / AFG2 Key Features:

3 Phase Electric Motor to IP67 Electric Motor weather-proof to IP67 Class H insulation Class F insulation and thermal cut out Temperature range: -20°C /+80°C Temperature range: -20°C /+80°C Speed: Up to 144 rpm Speed: Up to 2800 rpm Power: Up to 1,25 KW Power: Up to 0,23 KW

Output Torque Range 100 to 3000 Nm

Electric Actuators

Elfor Controls Scotch-Yoke Actuators are heavy duty, quarter-turn rotary type.Manufactured in models EC0, EC1, EC2, EC3 and EC4 Models according to different Output Torque ranges.

FEATURES

Totally enclosed waterproof body. Single or double acting versions. Symmetric or canted Scotch Yoke design. Pneumatic version cylinder polished with electro-less nickel plated internal

ASTM-B733 and UNI ISO 4527 and carbon steel piston with dynamic floatingO-ring seal.

2 independent external travel stops for precise angular stroke adjustment. Position indicator complete with VDI/VDE 3845 NAMUR for mounting

accessories.

Pneumatic & HydraulicScotch Yoke

TRUNNION BALL VALVES 24’’ 600lb with Pneumatic actuator Double effect

Elfor Controls Compact Actuators are the best solution where minimization

of the overall dimension is a key point.

Compact quarter-turn actuators for on-off and modulating control of ball, butterfly or valves in heavy duty service.

Actuators can be provided complete with control panel which is usuallydesigned according to project/ customer specification with a wide range of customized adaptation.

Pneumatic & HydraulicCompact

Hydraulic - Compact Pneumatic - Compact

Elfor Controls Linear Actuators, double acting and spring return.

Designed for on-off or regulation of gate and globe valves, from very high to very low thrust requirements.

Heavy duty design and special care on materials selection make Elfor ControlsLinear actuators suitable for severe and corrosive environment installation.

A wide range of control units customizations can be provided according to allcustomer needs.

Pneumatic & HydraulicLinear

Pneumatic & HydraulicLinear

Elfor Controls Electro - Hydraulic Actuators, double acting and spring

return.

DOUBLE ACTING: starting from 1.000 up to 125.000 Nm.

SPRING RETURN: from 1.000 up to 60.000 Nm (considered lower value of the spring) SPRING-RETURN UNIT.

During the opening cycle, the motor turns on and drives the hydraulic pump and the fluid is forced into the actuator cylinder moving the actuator to the open position.A limit switch box give the signal to the motor that will stop to work, while the fluid will be blocked by closing a solenoid valve to maintain the position.To move the actuator to the close position, the solenoid valves are opened allowing fluid to flow to the reservoir.

Electro - Hydraulic

Electro - Hydraulic

COMPONENTS:

Inlet Filter / Pressure Regulator Limit Switches Quick Exhaust units Control Solenoid valves Tubing Mounting Bracket + other according to customer request

Control Panels

Control Panels

De-Clutchable manual overides Positioners Box Micro Quick exhaust Valve Speed control Valve Storage Tanks + other according to customer request

Accessories

CoatingsElfor Controls standard coating specification consist of the following

Cycle:

Sand blasting to grade SA 2 ½.

Primer: ZINC RICH PRIMER (D.F.T. 80 microns).

Finish: POLYURETHANE FINISH (D.F.T. 70 microns).

The total thickness of the cycle will be minimum of 150 microns

(dry film).

Final Colour: RAL 2009 (Orange)

Options are also available for alternative colours and

coatings for corrosive atmospheres.

In-House Design Team

Whether a complete package including Valve,actuator and accessories, or free issued items, our in-house design team can design a finalproduct to fully meet the client requirements of each application.

EXAMPLE: Trunnion Ball Valve & Pneumatic Scotch Yoke Spring Return Actuator.

In-House Design Team

In-House Design Team

The Results:Scotch Yoke Pneumatic Actuator with TrunnionBall Valve, inclusive of:

Three Way Inlet ValveInlet FilterFlow RegulatorCheck Valve3/2 Solenoid ValveQuick Exhausr ValveLimit Switch BoxSilencers

Client Documentation Inclusive Of:Complient Client Data SheetsCertificate of originManufacturing Record BookPMISIL 2 Certificate for packaged unit

Aftermarket Service

With many thousands of actuators installed in a wide variety of industries, from standard installations to the most remote and severe locations, ourreliability recognized as a worldwide leader.

The advange of selecting Elfor Controls asyour partner is that you need only one company to solve all your requirements.

Elfor Controls technicians are always availableto give maximum support on site for start-up, commissioning and in case of trouble shooting

Aftermarket Service

Main spare parts always available : To guarantee availability in emergency.

Spare parts service : to guarantee originalspare parts interchangeable with existingone.

Fast shipment service: 24/48 hours spareparts shipment service.

Remote customer care : telephoneassistance during start-up, commissioningand normal operation.

Field service on site : Skilledtechnicians available for site service.

Maintenance service on site : For regular maintenance of your actuator and accessories.

Upgrade service : to be able to propose the best new solutionavailable for your system.

Training on site : for bettercalibration and knowledge of your system.

CUSTOMER CONTRACTOR DESTINATION

DK Engineering AKER / IDEMITSU VIETNAM

TWS GROUP ORASCOM ENGINEERING EGYPT

CONTROLFLUID S.r.l. TECNIMONT INDIA EGYPT

TECNOVIDUE ENI TECNOMARE EGYPT

TUAN LOC CONSTRUCTION INVESTMENT CO VIETNAM

ALAS MECCANICA GE / NUOVA PIGNONE ITALY

ELETTROMECC.ING.F.ARDUINI Srl ABB Power Technologies WORLDWIDE

ZA.VE.RO S.r.l. SICIM KZ / MAERSK OIL KAZAKISTAN

ATMOC WLL QATAR PETROCHEMICAL COMPANY (QAPCO) QATAR

COMART spa (TOZZI GROUP) COMART / TECNICAS REUNIDAS ALGERIA

ICHINOSE EMICO VALVES PETRONAS SIGNAPORE

NIGREMA S.r.l. REPCO – WEATHERFORD NIGERIA

NUOVO DLM VALVO S.r.l. ENI CONGO

VIRGO EUROPE S.p.A. STOGIT S.p.A. MALAYSIA

FURTHER INFORMATION AVAILABLE UPON REQUEST

References

Our Realizations

Our Realizations

Our Realizations

Our Realizations

Our Realizations

Our Realizations

Our Realizations

Our Realizations

IVS EXHIBITION Bergamo, Italy May 24-26th 2017

Market Presence

Market Presence

IVS EXHIBITION - Bergamo, Italy - May 24-26th 2017

ELFOR CONTROLS CONTACT DETAILS

We are located in a brand new Headquarter in:Via Bastone 148/15024044 Dalmine(BG) Italy

Tel.: +39 035-561140E-mail: info@elforcontrols.itWeb-site: www.elforcontrols.it

Thank You For Your Attention