COMPANY PROFILE
Delta Group
Delta Engineering
Cosmec Elfor Controls
Who we are
Where we are
Total Area 30.000 m2
Covered Area Carbon Steel 7.000 m2
Covered Area Stainless Steel 2.000 m2
Covered Test Area 1.000 m2
Location
1981Constitution Date
1992Cosmec Acquisition
ISO 9001 Quality System
1995Filtration Department
2005Sales Expansion in
Mediterranean Basin & Europe
2010World Market Expansion
2013Elfor Controls Acquisition
Group History
Elfor Controls was born in the ’70 following the increasing demand of Valve
Automation products in various industrial sectors. Consequently Elfor Controls
started to develop its first range of electric actuators and later the company
expanded to increase its offering capability and to engineer a wide range of
Pneumatic & Hydraulic Actuators equipped with their relevant control systems.
From 2006 to 2014 the company went through a radical renewal, during which
time it was incorporated into the Delta Engineering Group, and now includes
the following RANGE OF PRODUCTS from it’s new office and factory in Dalmine,
Italy, making it a world leader.
Elfor Controls History
Scotch-Yoke Hydraulic & Pneumatic Actuators
Linear Hydraulic & Pneumatic Actuators
Electro – Hydraulic Actuators
Rack & Pinion Pneumatic Actuators
Electric ¼ turn and multi-turn Actuators
Manual Gearboxes
Positioners
Limit Switches
Control Panels, Solenoid Valves & accessories
Product Range
The Company has the capability to provide the complete package:
Valve + Actuator and Control System Assembly
Elfor Controls actuators can be provided either with Scotch Yoke (symmetricalor canted) or Rack and Pinion mechanisms.Our actuators are suitable for a wide range of applications and are primarilysupplied in the following markets:
Oil & Gas Chemical & Petrochemical Process Industry Water Treatment LNG Plants
Activity
Excellent Quality
Short deliveries
Customised solutions
Short reaction to Customers needs
Flexibilty
Prompt and professional pre/after Sales Service
Full package Valve + Actuator + Control System
Service for valves and Actuators
Our Strenghts
ELFOR CONTROLS strongly believes that the greater the level of service, the higher the customer satisfaction, and we are pleased to introduce you to ourformula to achieve this:
Excellent Quality +Customized Solutions +
Short Delivery =
Total Customer Satisfaction
Our Philosophy
Certification
Certification
Steel Industry Biomass GeoThermal
Oil & Gas Power Generation Water Treatment
Market Sectors
Our Products
Elfor Controls Rack & Pinion Actuators are Quarter-turn (Models 052 to 270).
Available in 10 models, either spring return or double acting.
Compact Aluminium construction and economical.
The ideal solution for small to medium valve service.
Operating pressure range from 3 to 8 bar.
Stainless Steel versions also available upon request
Output Torque Range 7 to 2900 Nm
Rack & PinionActuators
Elfor Controls Electric Actuators are Quarter-turn (Models AFG1-AFG2) and Multi-Turn (Models SEM10-SEM50).
SEM10 / SEM50 Key Features: AFG1 / AFG2 Key Features:
3 Phase Electric Motor to IP67 Electric Motor weather-proof to IP67 Class H insulation Class F insulation and thermal cut out Temperature range: -20°C /+80°C Temperature range: -20°C /+80°C Speed: Up to 144 rpm Speed: Up to 2800 rpm Power: Up to 1,25 KW Power: Up to 0,23 KW
Output Torque Range 100 to 3000 Nm
Electric Actuators
Elfor Controls Scotch-Yoke Actuators are heavy duty, quarter-turn rotary type.Manufactured in models EC0, EC1, EC2, EC3 and EC4 Models according to different Output Torque ranges.
FEATURES
Totally enclosed waterproof body. Single or double acting versions. Symmetric or canted Scotch Yoke design. Pneumatic version cylinder polished with electro-less nickel plated internal
ASTM-B733 and UNI ISO 4527 and carbon steel piston with dynamic floatingO-ring seal.
2 independent external travel stops for precise angular stroke adjustment. Position indicator complete with VDI/VDE 3845 NAMUR for mounting
accessories.
Pneumatic & HydraulicScotch Yoke
TRUNNION BALL VALVES 24’’ 600lb with Pneumatic actuator Double effect
Elfor Controls Compact Actuators are the best solution where minimization
of the overall dimension is a key point.
Compact quarter-turn actuators for on-off and modulating control of ball, butterfly or valves in heavy duty service.
Actuators can be provided complete with control panel which is usuallydesigned according to project/ customer specification with a wide range of customized adaptation.
Pneumatic & HydraulicCompact
Hydraulic - Compact Pneumatic - Compact
Elfor Controls Linear Actuators, double acting and spring return.
Designed for on-off or regulation of gate and globe valves, from very high to very low thrust requirements.
Heavy duty design and special care on materials selection make Elfor ControlsLinear actuators suitable for severe and corrosive environment installation.
A wide range of control units customizations can be provided according to allcustomer needs.
Pneumatic & HydraulicLinear
Pneumatic & HydraulicLinear
Elfor Controls Electro - Hydraulic Actuators, double acting and spring
return.
DOUBLE ACTING: starting from 1.000 up to 125.000 Nm.
SPRING RETURN: from 1.000 up to 60.000 Nm (considered lower value of the spring) SPRING-RETURN UNIT.
During the opening cycle, the motor turns on and drives the hydraulic pump and the fluid is forced into the actuator cylinder moving the actuator to the open position.A limit switch box give the signal to the motor that will stop to work, while the fluid will be blocked by closing a solenoid valve to maintain the position.To move the actuator to the close position, the solenoid valves are opened allowing fluid to flow to the reservoir.
Electro - Hydraulic
Electro - Hydraulic
COMPONENTS:
Inlet Filter / Pressure Regulator Limit Switches Quick Exhaust units Control Solenoid valves Tubing Mounting Bracket + other according to customer request
Control Panels
Control Panels
De-Clutchable manual overides Positioners Box Micro Quick exhaust Valve Speed control Valve Storage Tanks + other according to customer request
Accessories
CoatingsElfor Controls standard coating specification consist of the following
Cycle:
Sand blasting to grade SA 2 ½.
Primer: ZINC RICH PRIMER (D.F.T. 80 microns).
Finish: POLYURETHANE FINISH (D.F.T. 70 microns).
The total thickness of the cycle will be minimum of 150 microns
(dry film).
Final Colour: RAL 2009 (Orange)
Options are also available for alternative colours and
coatings for corrosive atmospheres.
In-House Design Team
Whether a complete package including Valve,actuator and accessories, or free issued items, our in-house design team can design a finalproduct to fully meet the client requirements of each application.
EXAMPLE: Trunnion Ball Valve & Pneumatic Scotch Yoke Spring Return Actuator.
In-House Design Team
In-House Design Team
The Results:Scotch Yoke Pneumatic Actuator with TrunnionBall Valve, inclusive of:
Three Way Inlet ValveInlet FilterFlow RegulatorCheck Valve3/2 Solenoid ValveQuick Exhausr ValveLimit Switch BoxSilencers
Client Documentation Inclusive Of:Complient Client Data SheetsCertificate of originManufacturing Record BookPMISIL 2 Certificate for packaged unit
Aftermarket Service
With many thousands of actuators installed in a wide variety of industries, from standard installations to the most remote and severe locations, ourreliability recognized as a worldwide leader.
The advange of selecting Elfor Controls asyour partner is that you need only one company to solve all your requirements.
Elfor Controls technicians are always availableto give maximum support on site for start-up, commissioning and in case of trouble shooting
Aftermarket Service
Main spare parts always available : To guarantee availability in emergency.
Spare parts service : to guarantee originalspare parts interchangeable with existingone.
Fast shipment service: 24/48 hours spareparts shipment service.
Remote customer care : telephoneassistance during start-up, commissioningand normal operation.
Field service on site : Skilledtechnicians available for site service.
Maintenance service on site : For regular maintenance of your actuator and accessories.
Upgrade service : to be able to propose the best new solutionavailable for your system.
Training on site : for bettercalibration and knowledge of your system.
CUSTOMER CONTRACTOR DESTINATION
DK Engineering AKER / IDEMITSU VIETNAM
TWS GROUP ORASCOM ENGINEERING EGYPT
CONTROLFLUID S.r.l. TECNIMONT INDIA EGYPT
TECNOVIDUE ENI TECNOMARE EGYPT
TUAN LOC CONSTRUCTION INVESTMENT CO VIETNAM
ALAS MECCANICA GE / NUOVA PIGNONE ITALY
ELETTROMECC.ING.F.ARDUINI Srl ABB Power Technologies WORLDWIDE
ZA.VE.RO S.r.l. SICIM KZ / MAERSK OIL KAZAKISTAN
ATMOC WLL QATAR PETROCHEMICAL COMPANY (QAPCO) QATAR
COMART spa (TOZZI GROUP) COMART / TECNICAS REUNIDAS ALGERIA
ICHINOSE EMICO VALVES PETRONAS SIGNAPORE
NIGREMA S.r.l. REPCO – WEATHERFORD NIGERIA
NUOVO DLM VALVO S.r.l. ENI CONGO
VIRGO EUROPE S.p.A. STOGIT S.p.A. MALAYSIA
FURTHER INFORMATION AVAILABLE UPON REQUEST
References
Our Realizations
Our Realizations
Our Realizations
Our Realizations
Our Realizations
Our Realizations
Our Realizations
Our Realizations
IVS EXHIBITION Bergamo, Italy May 24-26th 2017
Market Presence
Market Presence
IVS EXHIBITION - Bergamo, Italy - May 24-26th 2017
ELFOR CONTROLS CONTACT DETAILS
We are located in a brand new Headquarter in:Via Bastone 148/15024044 Dalmine(BG) Italy
Tel.: +39 035-561140E-mail: [email protected]: www.elforcontrols.it
Thank You For Your Attention