Embed Size (px)
Citation preview
Relion® Protection and Control
Relion® 650 and 670 series instructionsHow to use order specific files in PCM600 2.x
March 24, 2010
1MRG000522
Rev. B
How to use order specific files in PCM600 2.x
Instructions
1. IntroductionThis document is designed to instruct the users on how to use the IED order specific files (more popular known as “option files”), more exactly – how to install them during the new IED insertion and the Configuration Wizard process or later on with the License Update Tool.
IED insertion if you work offline, follow the steps described in Chapter 2: - If you don’t have access to the IED.
IED insertion if you work online, follow the steps described in Chapter 3:- If you have access to the IED.
How to run License Update Tool, follow the steps described in Chapter 4: - If you already started engineering.
2. If you don’t have access to the IEDThese steps assume that you have access to the order specific files (e.g. 213314930.zip, i.e. ordernumber.zip)
Step 1Unzip the file to extract the file “Orderoptions 213314930.xml“from it.
Step 2Start PCM600 and insert your IED, the IED Configuration Wizard will then start.Select the Offline option and click Next.
Figure 1
March 24, 2010
1MRG000522
Rev. B
How to use order specific files in PCM600 2.x
Instructions
Step 3Select communication protocol and click Next.
Figure 2
Step 4Enter the IP address for your IED and click Next.
Figure 3
March 24, 2010
1MRG000522
Rev. B
How to use order specific files in PCM600 2.x
Instructions
Step 5Select the IED version and click Next.
Figure 4
Step 6Select Browse and navigate to the directory containing the previously unzipped xmlfile. Select the xml file, click Open and Next (Fig. 6 and Fig. 7).
Figure 5
March 24, 2010
1MRG000522
Rev. B
How to use order specific files in PCM600 2.x
Instructions
Figure 6
Figure 7
March 24, 2010
1MRG000522
Rev. B
How to use order specific files in PCM600 2.x
Instructions
Step 7Confirm the housing options, by clicking Next.
Figure 8
Step 8Click Finish on the last Configuration Wizard screen, to complete the IED insertion process.
Figure 9
You are ready now to use the inserted IED in PCM.
March 24, 2010
1MRG000522
Rev. B
How to use order specific files in PCM600 2.x
Instructions
3. If you have access to the IEDStart PCM600 and insert your IED, the IED Configuration Wizard will then start.Select the Online option and click Next.
Figure 10
Perform step 3 and 4 described in chapter 2 and then perform a scan on the IED that you are connected to by clicking Scan and Next.
Figure 11
Perform step 7 and 8 described in chapter 2, to complete the online installation. The order options will be loaded from the IED.
You are ready now to use the inserted IED in PCM.
March 24, 2010
1MRG000522
Rev. B
How to use order specific files in PCM600 2.x
Instructions
4. If you already started engineeringFor offline license update these steps assume that you have access to the order specific files (e.g. 213314930.zip, i.e. ordernumber.zip)
Step 1For offline license update unzip the file to extract the file “Orderoptions 213314930.xml“from it.
Step 2Start License Update Tool by right clicking the IED and select “License Update Tool”.
Figure 12
Step 3Select Yes or No to make a backup or not. It’s recommended to make a backup.
Figure 13
March 24, 2010
1MRG000522
Rev. B
How to use order specific files in PCM600 2.x
Instructions
Step 4Select Online or Offline and click next. For Offline follow step 5, 6 and 8.For Online follow step 7 and 8.
Figure 14
Step 5Select Browse and navigate to the directory containing the previously unzipped xmlfile. Select the xml file, click Open and Next.
Figure 15
March 24, 2010
1MRG000522
Rev. B
How to use order specific files in PCM600 2.x
Instructions
Step 6Click Finish on the last License Update Wizard screen, to complete the IED license update process.
Figure 16
Step 7Click Finish on the last License Update Wizard screen, to complete the IED license update process.
Figure 17
March 24, 2010
1MRG000522
Rev. B
How to use order specific files in PCM600 2.x
Instructions
Step 8After completion a migration report is presented, showing deleted functionality.
Figure 18
Deleted blocks are marked blue in Application Configuration Tool.
Figure 19
If there are any deleted function blocks, you need to check the configuration and make sure that all variables related to that function block are deleted as well and this will not impact the configuration.
After this, you are ready now to continue using the IED in PCM.
5. LimitationIf the order option in the IED is updated and a read command is executed, operation will fail. Hence the order option and the configuration will not match in the IED. To avoid this situation it is recommended that always execute a write operation from PCM with the new order options in order to synchronize the configuration and order options both in IED and PCM.
March 24, 2010
1MRG000522
Rev. B
How to use order specific files in PCM600 2.x
Instructions
ABB ABSubstation Automation ProductsSE-721 59 VästeråsSwedenTelephone: +46 (0) 21 34 20 00Facsimile: +46 (0) 21 14 69 18www.abb.com/substationautomation
