Apt 7, Lot 6 Mahabir Development Siparia Old Road

Avocat Village Fyzabad

Trinidad Cell #: 1-868-473-5712 Email: colin_l_morris@gmail.com.

Colin L Morris

Personal Information

Over twenty years’ experience in Drilling Waste Management and Solids Control. Twenty- four years total Oilfield experience.

Marital Status: Married

Nationality: Trinidadian

Country of residence: Trinidad

Age: 47

Place of Birth: San Fernando

Summary of Qualifications

A.T.O.C. Basic Safety Training Course 1995, 1997

Basic Safety Refresher 2002

T.S.F. Safety Module (O.J.T.) 2001.

T.S.F. First Step Training Safety Management System 2001.

T.S.F. Safety and Induction Module 2002.

ENSCO Safe Systems of Work 2004.

W.S.P.C.L. Drilling School Roustabout (O.J.T.) 1997.

W.S.P.C.L. Drilling School Introduction to Drilling Equipment and Operations 1997.

W.S.P.C.L. Drilling School H 2 S Awareness 1997.

W.S.P.C.L. Drilling School Floorman (O.J.T.) 1998.

T.S.F. Floorman (O.J.T.) 2002.

P.C.S. Computer Literacy 2001.

MI Swaco Centrifuge Workshop 2003.

H.H.S.L. Basic HSE Training (Offshore) Course 2004.

H.H.S.L. Helicopter Survival Training Programme (HUET) 2004.

MI Swaco Electrical Workshop 2004.

Trinmar ISO 14001 Training 2004.

S.B.C.S. Supervisory Management Programme 2005.

N.S.C. Coaching the Lift Truck Operator 2005.

W.S.P.C.L. Basic Well Control Course 2006.

Performing Authority Training Course 2008.(BP)

I.S.S.O.W Training Course 2008

TBoiset 2011

MI Swaco Advanced Verti-G (Top of Class)

MI Swaco Clean Cut Theory and Application (2nd in Class)

MI Swaco Clean Cut Operations and Maintenance (Top of Class)

Fatigue Management Level 1

First Aid Level 1

Hazard Identification Level 1

QHSE Induction

Well Integrity Level 1

Observation Intervention Level 1

SIPP Level 2

Emergency Response Drill (Fire)

Emergency Response Drill (Hazardous Substances/Spill)

AVERT- Armed Robbery Security Event

Commentary Task Assessment (SIPP)

DROPS Level 1

Electrical Safety Level 1

Emergency Response Drill (Fire)

Employee Security Level 1

Fire Safety Level 1

Environment Level 1

H2S Safety Level 1

Hazardous Materials Level 1

Health and Hygiene Level 1

Lock out Tag out Level 1

Noise/Nuisance Level 1

Permit to Work Level 1

PPE Level 1

Pressure Level 1

SIPP Level 2 (Non-Office)

Standard Work for Field Operations

GHS (Global Harmonized System) Basic Training

IT Security Level 2

IT Security: Phishing

EAF - Five for Hand Injury Prevention Level 1

FIVE-4- Zero Hand Injury Prevention

Performing Authority Training

Transocean Permit to Work System

MI Swaco Deepwater Certification Program for ES Specialists:

ES Deep Water Certification M1 Introduction and Overview ES DWC M13- Mixing on the Fly- HiSIDE ES DWC M11 Managed Pressure Drilling ES DWC M12 Wellbore Strengthening ES DWC M3 Basic Calculations ES DWC M4 Equipment Installations ES DWC M5 Offshore Personnel Roles and Responsibilities ES DWC M6 Circulation and Displacement

ES DWC M7 Key Performance Indicators ES DWC M8 Contingency Planning and Failure Scenarios ES DWC M9 Reporting and Documentation ES DWC M10 Gas Hydrates ES DWC M2 Equipment used in Deepwater Drilling

Rigs/Locations/Clients

Well Services Marine One (Modular); Poui, Samaan Fields;Trinidad, East Coast (Amoco)

Transocean Marine 3 (Modular); Immortelle platform; Trinidad, East Coast (BPAmoco)

Transocean Rig 110 (Jack Up); Soldado, South West fields; Trinidad West Coast (Trinmar)

Stena Tay (Semi-submersible): Trinidad East Coast (Shell)

Ensco 76 (Jack Up); Kapok platform; Trinidad, East Coast (BP)

Petrotrin Rig 1 (Land rig); Grand Ravine field; Trinidad (Petrotrin)

KCA Deutag Chirag 1 (Platform); Azeri-Chirag-Gunashli Field; Azerbaijan (BP)

Shah Deniz (Jack Up); Shah Deniz Field; Azerbaijan (BP)

KCA Deutag Ben Avon (Jack Up); Gabon (CNR)

Caroil 14 (Land rig); Mombe Field; Cameroon (Perenco)

H&P rig 203 (Modular) Toucan Field; East Coast, Trinidad (EOG Resources)

ESSO TLP-A (Tension Leg Platform); Block 15; Kizomba field; Angola (ESSO)

Transocean Celtic Sea (Semi-submersible); Block 15 Angola (ESSO)

Paragon M825 (Jack-Up) KB Main & East Panel, Cameroon (Perenco)

Education

San Fernando Technical Institute Business Management 1988-1990

Barrackpore Senior Comprehensive GCE Advanced Level 1986-1988

Naparima College CXC Ordinary Level 1981-1986

Professional Experience

June 2016 to September 2016: EARTH Company Limited, Trinidad.

HSSE Assistant:

Assist in preparation & creation of HSSE Documentation. Review various elements of Company’s HSSE policies Prepare Emergency Response Plans Prepare Power point Presentations for New Employee and Contractor/ Visitor

Orientation for both Office and Hazardous Waste Facility. Sorted and filed HSSE documentation for previous 4 years.

September 2014 to February 2016 ; MI Cameroon

Lead ES Supervisor: Paragon M825, Perenco Offshore. KB Main & East Panel, Cameroon

Supervise crew of 3

Operate and perform maintenance on CSI WSM 03 Verti-G, two CD 518 HV Electric Centrifuges, One FHD 518 Centrifuge, One Nord Auger Conveyor, 3 Nova mono pumps, Nemesis Vac, and diaphragm pumps. Nemesis Pressure Washer

Perform Retorts and supervise completion of Excel Daily reports.

Complete Section Recaps including costing.

Manage logistics relating to movements of personnel and equipment.

Maintain Inventory of necessary spares, tools and equipment. Notable achievements

Commissioned all MI Swaco ES equipment in time for Drilling OBM section with limited material and manpower.

Improvised and improved original Installation plan

July 2011 – 2014; MI Angola:

April 2012 to July 2014;

Lead ES Engineer: Transocean Celtic Sea, ESSO, Block 15, offshore Angola

Supervise crew of 3

Operate and perform maintenance on CSI WSM-02 Verti-G, two 518 Electric Centrifuges, Three Nord Auger Conveyors, 3 Nova 80 mono pumps, 100 hp Vac, and diaphragm pumps. MI Swaco Automated Tank Cleaning System.

Perform Retorts and supervise completion of Excel Daily reports.

Manage logistics relating to movements of personnel and equipment.

Maintain Inventory of necessary spares, tools and equipment. Notable achievements

Modified Dryer and Centrifuge effluent lines to Catch tank to prevent solids laden mud from Dryer being returned to active system, and reduce possibility of tank overflow

Modified Dryer discharge flush to enable machine to handle cuttings in 17 ½” hole section with zero downtime.

Streamlined fluid transfer, flush and pneumatic operations to eliminate wasted materials and overall labor requirements for Swaco operations and increase safety of installed components.

Reduced equipment downtime in 17 ½” hole. (Prior to my arrival on rig MI Swaco incurred many hours NPT while drilling during this hole size section).

Installed ATC system for automated tank cleaning. Recognized for participation in Safety program and adherence to safe work

practices.

Reinforced Conveyor Trough to prevent twisting under high Torque. Developed contingencies for breakdowns. Fabricated and installed Salt water Flush inside Dryer to prevent unit from

packing off; 100% success rate. Fabricated and installed salt water flush on Cuttings Dryer Discharge Conveyor

to prevent plugging around Hangar Bearings. Installed Automated Tank Cleaning System in 4 Reserve Pits. Modified 2 NR 60 mono pumps to accept NR 80 components due to shortage of

NR 60 components in Angola. Created and update Written Work Assessments for tasks on board the rig.

July 2011 to April 2012

Lead ES Engineer: Ensco TLP-A, ESSO, Kizomba A, Block 15, Angola

Supervise a crew of 3

Operate and maintain one CSI WSM-04 Dryer, two 518 Electric Centrifuges, 4 Nova 80 Pumps, one Mantovani Auger Conveyor and two Ingersol Rand Diaphragm Pneumatic Pumps.

Perform Retorts and supervise completion of Excel Daily reports.

Manage logistics relating to movements of personnel and equipment.

Maintain Inventory of necessary spares, tools and equipment.

Notable achievements

Completely overhauled both Centrifuges on site.

Improved efficiency of operation through regular and thorough maintenance which was previously lacking.

Performed and updated inventory on rig and removed many unnecessary items from

location Volunteered to work overtime (24hours) alongside other expats to assist in the

completion of gravel pack job during “industrial action” by the Angolan employees on the rig. Was subsequently awarded by ESSO.

Eliminated downtime from October 2011 to April 2012. Successfully demobilized equipment in 7 days safely and within required time frame

despite being unable to start job on time due to late arrival of manpower and materials.

Retained by ESSO and transferred to Transocean Celtic Sea.

February 2011 – June 2011 ; MI Trinidad

Solids Control Technician: H&P Rig 203, EOG Resources Toucan, Trinidad

Operate and maintain 2 CD 500 Centrifuges, 2 WSM-03 Dryers, 2 100 HP Vacuum units, one 30 HP Vacuum Unit, one Auger, 2 Pressure Washers, one Roto Hopper.

June 2010 – August 2010 ; MI Cameroon

Night Supervisor: Caroil14, Perenco, Mombe Cameroon.

Supervise a crew of 6

Operate and maintain Dewatering unit, one 518 Hydraulic, Two 518 electric, one 414 Centrifuge, three Auger Conveyors and one ALS Shaker.

Perform and supervise Dewatering Operations

Supervise and record water disposal.

Perform Retorts and supervise completion of Excel Daily reports. Notable achievements

Repaired Dewatering unit hopper Re-configured rig up to improve efficiency during centrifuge operation

May 2010 ; MI Azeri

Lead Engineer: Chirag 1, BP Azerbaijan

Supervise a crew of 3

Install operate and maintain WSM-03 Dryer skid complete with 414 Centrifuge, Mono and Diaphragm pumps.

Supervise pit cleaning and Filtration operations.

Assist in the monitoring of screens and operation of Rig Centrifuges (414 & 518) while drilling.

Perform Retorts and supervise completion of Excel Daily reports.

Complete Word Well recaps

Manage logistics relating to movements of personnel and equipment.

Maintain Inventory of necessary spares, tools and equipment.

Notable achievements

Modified rig up to handle 17 ½” hole successfully.

October 2009; MI Gabon

Night Supervisor: Ben Avon, CNR Gabon

Supervise Night Operations and crew of 2

Operate and maintain CSI WSM-03 Dryer, 414 and 518 Centrifuges, Mono and Diaphram pumps.

Perform Retorts, monitor discharges, OOC and reclaimed volumes as per schedule and submit Excel Daily Reports

June 2007 to January 2009; MI Azeri Ltd

Lead Engineer: Chirag 1, BP Azerbaijan

Supervise a crew of 3

Install operate and maintain WSM-03 Dryer skid complete with 414 Centrifuge, Mono and Diaphram pumps.

Supervise pit cleaning and Filtration operations.

Assist in the monitoring of screens and operation of Rig Centrifuges (414 & 518) while drilling.

Perform Retorts and supervise completion of Excel Daily reports.

Complete Word Well recaps

Manage logistics relating to movements of personnel and equipment.

Maintain Inventory of necessary spares, tools and equipment.

Notable achievements

Installed and operated first WSM-03 Cuttings Dryer for MI Swaco in Azerbaijan. Zero downtime.

June 2006 to June 2007; E.A.R.T.H. Company Limited

Site Manager: Guapo Hazardous Waste Facility

Manage crew of 15

Supervise Daily operations

Recommend and implement Site Upgrades

Create Equipment maintenance schedules

Implement Company Policies and mentor site personnel

Compete Weekly Reports and monthly Payroll reports

Improve Plant efficiency

Submit Improvement Proposals to Upper Management

Notable achievements

Relocated oil recovery equipment to more suitable location. Oil recovery unit re-designed. Modified shaker for screening operations on site. Implemented shift system Improved worker morale Reduced environmental issues on site Improved site security Site’s electrical installation commissioned.

January 2003 to June 2006; MI Swaco

Lead Technician: TODCO 110 (Trinmar)

Supervision of a crew of 4.

Installation, operation and maintenance of Swaco 30HP and 100HP Vacuum Units, Roto Hopper, 414 and 518 Centrifuges, and CSI Verti-G Cuttings Dryer.

Sampling and Testing (retorts) of cuttings discharge and compilation of data for well recaps.

Manage logistics relating to movements of personnel and equipment.

Maintain Inventory of necessary spares, tools and equipment.

Shop Foreman; MI Swaco HQ Point Lisas.

Solids Control Technician; ENSCO 76, Santa Fe Constellation (BPTT), Petrotrin Rig 1, Stena Tay (SHELL), WSL Rig 15.

Installation, operation and maintenance of Swaco Injection System (Ranger Auger Conveyors, CLEANCUT Cuttings Blower and ISO Tanks, National Oilwell Triplex Pumps), CSI Cuttings Dryer, Swaco 30HP and 100HP Vacuum units, and Hutchison Hayes 5500 Centrifuges.

Repairs to Swaco BEM-600 Shakers.

Installation of Swaco “Mongoose” Shakers. 1998 to 2003; Cliffs Drilling Company, Reading and Bates Falcon, Transocean Sedco

Forex, Transocean Inc.

Solids Control and Instrument Technician; Marine One, Marine Three, Cliffs 209, TSF 110.

Operation and maintenance of all rig owned/leased solids control equipment including Derrick Flo-line cleaners, Mud Cleaners, Sweco Desanders , Desilters and SC-4 Centrifuges (Hydraulic and Electrical), Burgess and Brandt Degassers, Brandt 3174 Centrifuge.

Maintenance, repair and calibration of Rig Information Systems (MD Totco Rig Sense, Petron 1000)

Maintenance, repair and calibration of Swaco Super Choke. 1993 to 1998; Well Services Marine Limited

Roustabout, Floorman.

References

Furnished upon request.

Hobbies

Music Production and Sound engineering. Building PC’s.