CMPSolutions Brochure WEB

www.cmpsolutions.net

Hygiene Equipment

advanced hygiene solutions from

2 Visit us on the web at: www.cmpsolutions.net

Who We Are And What We Docm process solutions provide specialist skills and services to the food processing and food service industry.

our teams of engineers have worked professionally at the highest levels for our corporate clients, delivering and installing capital projects not only in the us, but in the united Kingdom, ireland, spain, Germany, Dubai, Australia and canada.

projects can range from site consolidation or relocations implementation and validation of production lines/specialist equipment, to the management and specification of new and existing manufacturing facilities.

cm process solutions are truly efficient in delivering projects that meet our clients requirements, whilst appreciating confidentially and business culture and operational differences between sites and locations.

What We Can SupplyWe supply a whole range of products tailored to your specific needs, such as individual boot washers to complete automated buggy washing systems.

this brochure illustrates some of our common products such as: boot washing systems, sinks, lifting and dumping machines and tote washers.

in addition to this we offer stainless steel tables, cooking racks, bins and general hygiene equipment for your food processing areas.

please view our website www.cmpsolutions.net for the latest product releases.

INTRODUCTION

5

54

1 1

3

2 2

3Contact us: [email protected] or 1.951.808.4376

the food processing industry has various directives and guidelines which form the basis of optimal sanitary management.

the aim of these guidelines is to prevent the contamination of food by careful and thorough sanitation of the staff, production rooms and equipment.

inspectors who visit the plants can even take temporary precautions against insufficient attention to the regulations.

Hygiene is therefore fundamental in every plant and needs to be tightly managed. optimum hygiene is the first condition for the security of products, positive image and economic success.

cm process solutions team of engineers has a wealth of experience in hygienic and sanitary design. We can work with your team and tailor a process layout to suit your facility.

1. Automatic soap dispenser HDK SG page 12

2. Hand Wash Sink WR4 page 33

3. Apron drying frame set SZT page 34

4. Apron cleaning machine SWM page 31

5. Foot Wear Cleaning and Hand Sanitizing URK page 8

Sanitary Blockades A Crucial Contribution To Optimal Sanitation In The Processing Plant

INTRODUCTION


Hygicontrol HCthe Hygicontrol Hc is an obligatory hygiene system placed between the production areas and the changing rooms. it is designed for the automatic sanitation of hands and the disinfection of soles prior to entering the production area. the soles of the footwear are also cleaned upon leaving the area by way of two horizontally mounted rotating brushes.

Features

• Ergonomic easy to clean sanitary design.• on entry into the production area the operator steps directly into the sole disinfection area and places

their hands into the automated hand sanitation unit.• on exit from the production area, the person passes through the unit via two sole cleaning brushes.• A one-way turnstile prevents entry into the production areas via the exiting side of the unit.• completely digitally operated via a control panel with an lcD display.• optional 3” or 12” side scrubbing brushes.

HC

cm process solutions range of hygiene stations are designed to enforce obligatory use and are positioned between the production area and the changing rooms.

the solution you require can be as simple as a single turnstile or sole washer to a complex fully automated footwear and hand washing/hand sanitizing system with multiple turnstiles.

All machinery is constructed from 304 grade stainless steel with sloped external surfaces and removable covers ensuring maximum sanitary design. All machines are delivered installation ready and include built in detergent injector systems with a smooth sand blast finish.

HYGIENE STATIONS


Hygicontrol HC/XXLthe Hc/XXl is similar to the Hc/Xl, but with double the entrance lanes it is designed for larger plants with a higher number of employees.

Features

• twin entrance lane into production areas with sole disinfection baths and hand sanitation units.• separate exit lane with sole cleaning brushes.• Automatic filling and re-dosing of footwear disinfection chemical.• All containers with chemicals are locked within the stainless steel framework.• All cycle times are fully adjustable by the lcD display.

Hygicontrol HC/XLA highly efficient machine with a double entrance and exit, designed so that two people can use the machine at the same time either as an entry or exit.

compact dimensions allow it to be fitted into narrow corridors.

Features

• Ergonomic easy to clean design.• Double entrance or exit design.• twin hand sanitizer chambers.• Built in detergent injector system.

HC/XXL

HC/XL

HYGIENE STATIONS


Hygicontrol Compact HC/Cthe Hygicontrol compact has the same functions as the larger Hygicontrol Hc range, but with a smaller compact footprint, it is an ideal unit for smaller passage ways or rooms.

Features

• Ergonomic easy to clean design.• completely digitally operated via a control panel.• All containers with chemicals are locked within the stainless steel framework.• can be supplied a footwear disinfection bath or optional set of horizontally mounted sole cleaning brushes.• Big capacity short entry time 3-5 seconds per person.

HC/C

HYGIENE STATIONS


Hygicontrol UDKthe uDK compact hygiene station is designed to ensure that employee’s correctly sanitize their hands and disinfect the soles of their footwear prior to entering the production area.

the machine is equipped with a stainless steel turnstile and will unlock automatically when the operator has correctly followed the machines requirements.

Features

• Ergonomic easy to clean design.• completely digitally operated via an lcD

control panel.• All cycle times are fully adjustable.• chemical containers are locked within the

machines stainless steel framework.• Automatic filling and re dosing of disinfectant

chemicals.• stainless steel turnstile for controlled access.• optional second chamber for automatic soap

dispensing and hand washing function uDKW.

UDK

HYGIENE STATIONS


HYGIENE STATIONS

Hygicontrol URK the uRK range of two way passage hygiene stations have all the functions and requirements needed to control sanitary measures within a factory.

the basic uRK is designed to ensure the operator cleans the soles of the footwear and sanitizes their hands prior to entering the production areas; a stainless steel turnstile prevents entrance if the procedure has not been correctly followed.

Features

• strong, solid, easy to clean construction.• Digitally operated via an lcD control panel.• Entry turnstile interlocked with hand sanitizer

function.• Built in detergent injector system.• can be upgraded to facilitate automatic hand

washing with soap dispensing.• optional 3” or 12” Vertical brushes for cleaning

the sides of boots or shoes.

Walkthrough Boot Washer DR/V300the DR/V300 is designed for easy and effective cleaning of the entire boot when passing through the machine, it has 5 brushes each individually controlled by their own motor.

A button mounted within the handrail starts the rotation of the brushes, the DR/V 300 come complete with a detergent injector system.

Features

• stainless steel heavy duty construction.• Easy to clean design.• complete with built in detergent injector system.• ideal for small traffic areas.

Walkthrough Boot Washer DR/V500the DR/V500 is designed for continuous passage two way entry, and full cleaning off boots.

the cleaning of the boots is facilitated by means of two horizontal brushes and four vertically inclined brushes each individually controlled by their own motor. it has a stainless steel handrail on both sides of the machine to provide additional operator safety.

Features

• stainless steel heavy duty construction.• sensor operated design.• Built in detergent injector system.• All chemicals are stored with the

machines framework• ideal for large traffic areas.

DR/V 300

DR/V 500


BOOT & SOLE WASHERS


Continuous Passage Walkthrough Sole Washing Machine DRthe DR range of sole washers are designed for obligatory use prior to entering a production area, the employee walks slowly over the brushes and the soles of the footwear are thoroughly cleaned.

the DR range is available in five different sizes, its robust construction and round profile edges make it a strong and easy to clean machine.

Features

• strong solid easy to clean construction.• sensor operated design.• Built in steps.• stainless steel handrails for optimum safety.• optional vertical brushes for cleaning the sides

of the footwear.• Built in detergent injector system.

BOOT & SOLE WASHERS


Stationary Boot Washer SR/V300the sR/V300 is designed to accommodate facilities where the need for washing boots is paramount but the volume of traffic into the designated area is minimal and space is a premium.

Features

• strong stainless steel construction.• sensor operated design.• Built in detergent injector system.• Brushes can be changed without the use

of tools.• Handle for operator stability.

Clog Cleaner SR/Cthe sR/c is a small compact cleaning machine designed for washing the soles and the upper part of the clog.

Features

• stainless steel construction.• sensor operated design.• Built in detergent injector system.• Handle for operator stability.

Sole Cleaner SRA compact cleaning machine designed for fast and efficient cleaning of soles.

Features

• stainless steel construction.• sensor operated design.• can be supplied wall or floor mounted.• Handle for operator stability.

SR

SR/C

SR/V300

BOOT & SOLE WASHERS

HDK/SP or HDK/DP

HDK/SG or HDK/DG


HAND HYGIENE SYSTEMS

Optimal Hand HygieneEffective measures taken for the complete sanitation of hands are crucial for assuring high levels of hygiene.

A four step procedure is necessary:

1. Automatic soap dispensing.

2. Washing under hot running water.

3. intensive drying of hands with paper towels.

4. sanitation of hands with an alcohol based product.

Automatic Soaping Of Hands With Access ControlEffective hand cleaning starts with the soaping of hands and subsequent rinsing under hot running water.

implementation of automatic dispenser units with access control ensures personnel wash their hands with soap when entering the production area.

cm process solutions can provide individual machines to deliver these four steps in one integrated machine.

Soap Guard HDK/SPthe HDK range is an automatic machine for dispensing soap or sanitation solution, with a stainless steel integrated turnstile for controlling the entrance.

After the required solution is dispensed the turnstile is released and the operator proceeds through the machine.


Automatic Hand Washer H/Wthis floor mounted unit can be used everywhere hand washing is obligatory; the machine can be supplied as a self standing unit or in combination with any other hygiene station.

As an option the machine can be fitted with a paper towel dispenser and a waste paper basket as seen in the picture on the right.

Features

• strong easy to clean design.• Automatically dispenses soap and water.• signal lights indicate when process is complete.• All soap and chemical containers are locked

within the framework of the machine.• machine can be upgraded to facilitate a hand

sanitizing function.

Automatic Hand Sanitizers H/Dthis easy and effective hand sanitizer design can be supplied in either a wall or floor mounted design.

Features

• strong easy to clean design.• All cycle times can be adjusted via the digital lcD controller mounted inside the machine.• All chemicals are locked within the stainless steel framework.• signal lights indicate when process is complete.

H/WD

H/DP H/D




All In One Hygiene Solution HDK/WDGthe HDK/WDG is the perfect machine for ensuring optimal hand hygiene in areas where it is necessary to only wash and sanitize the operator ’s hands.

the machine has a chamber for soap dispensing and hand washing and a separate chamber for the sanitizing of hands. the machine is supplied with a stainless steel turnstile and is only unlocked upon completing the correct process.

Features

• Ergonomic easy to clean design.• Adjustable process times controlled by a

digital lcD display.• All chemicals are stored within the stainless

steel framework.• optional paper towel dispenser.

Turnstile DKthe DK turnstile is designed to effectively control the flow of operatives into an area. the DK is manufactured from 304 grade stainless steel and can be supplied in either a wall mounted or floor mounted execution.

Floor mounted DK/F

Wall mounted DK/P

Options:

• Anti-panic (1)• signal lights (2)

(1)

(2)

The unit has 5 pre set modes.

1. Always open.

2. Always closed.

3. closed with anti panic feature.

4. Electronically controlled.

5. Electronically controlled with anti panic feature.


Industrial Washerscm process solutions are an established supplier of commercial and industrial washing systems to the food, pharmaceutical, and distribution industries.

our range of standard commercial and industrial washing machines are specifically designed with optimal hygiene in mind to efficiently wash and sanitize items such as stainless steel pans, trays, cheese moulds, cooking and smoke trucks, vats, 400lb & 600lb buggies & v mag carts, pallets, lugs, barrels, screens, and scale buckets.

We offer our machines in either a batch or a continuous design, with speeds ranging from 200 to several thousand containers per hour.

cm process solutions have the ability to custom build our range of industrial and commercial washing machines to whatever you’re specific needs and demands.

WASHING MACHINES


Industrial Tunnel Washerscm process solutions range of tunnel washers are designed to offer a continuous in line washing solution for items such as totes, trays, stainless steel sheet pans and lugs.

our range of commercial washers can be supplied with various different heating options such as gas, steam coils, live steam injection and electric.

the tunnel washer can be supplied with various options to meet your specific requirements such as different types of wash configurations, filtration and also drying systems.

Features

• stainless steel 304/316 grade construction.• Variable speed control.• Electrically interlocked service covers.• stainless steel transport chain conveyors.• stainless steel control panel.

Options

• Gas, steam or electric heating.• Various wash configurations.• speeds ranging from 200 to 5000 per hour.• Automatic filtration for large debris removal.• Drying systems.

WASHING MACHINES


Cheese Mould Washerscm process solutions range of cheese mould washers are custom designed to the specific mould you are washing, it has an increased pump size than the standard tunnel washer to assist in the removal of whey and to ensure the optical cleaning of the intricate perforations in many moulds.

the machine is equipped with a stainless steel mesh belt, so that moulds of all shapes and sizes can be positioned on the belt and held in position with adjustable top and side guide rails.

Features

• stainless steel mesh belt.• Electrical interlocked doors.• Hygienic sanitary design.• Variable speed control.

Options

• speeds up to 1000 moulds per hour.

• Drying tunnel.• Automatic filtration.• Various wash configurations.• chemical dosing systems.

WASHING MACHINES


Cabinet Buggy Washerscm process solutions range of cabinet buggy washers come in two sizes, the Ec20 which is a single capacity machine and can wash up to 25 buggy’s per hour or the Ec40 which is a double capacity unit and can wash up to 50 bins per hour dependent on soiling levels.

Both machines can be heated by steam or electric, and can be supplied with various wash configurations and filtration systems.

WASHING MACHINES

EC 20 Features

• sustained jetting with hot water and chemicals.

• Automatic filling and level controls.• Electrical interlocked doors.• sanitary and hygienic construction.

Options

• steam or electric heating.• Various wash configurations.• Automatic rotary filters.• chemical dosing system.

EC 40 Features

• Double capacity design.• Electrical interlocked doors.• Re-circulated hot wash.• sanitary and hygienic design.

Options

• Gas steam or electric heating.• cassette for washing lids.• steam or condensates extract system.• chemical dosing system.

EC 20

EC 40


Tunnel Buggy Washerthe Et75 is a conveyorised tunnel washer and is designed for washing large quantities of buggy’s with capacity ’s and throughputs of up to 75 buggy’s per hour dependent on the level of soiling.

the buggy’s are automatically inverted and loaded on to the machine and are transported through the wash tunnel by a stainless steel chain conveyor, after the wash process is completed the buggy is then automatically unloaded and delivered to the floor level allowing the operator to remove.

the Et75 is supplied with a recirculated hot wash tank and also a recirculated hot rinse tank, a fresh sanitizing rinse can also be employed.

manufactured to high sanitary standards it has sloping surfaces where possible and electrical interlocked service covers to allow efficient cleaning.

WASHING MACHINES

Features

• Automatic load and unload system.• stainless steel guarding.• Electrically interlocked service covers.• Removable catch basket filters.

Options

• steam, gas or electrically heated tanks.• pre wash tank.• Automatic filtration system.• steam and condensate extract systems.• chemical dosing system.


Vat Washerscm process solutions range of vat washers are designed to facilitate the efficient cleaning of items such as stainless steel vats, plastic vats and other bulk containers.

cabinet units can be supplied with a single or double bays to accommodate various throughput rates, multiple programmable wash cycles are included which gives flexibility for a wide range of soiling, allowing the customer to custom select the specific cycle based on the soling of the vats.

inline systems work on the same principle as the Et75 Buggy washer, the vats are loaded and unloaded into the machine by automatic bin inverters, as an option the inline system can be supplied with an indexing mechanism allowing the vat or container to pause at a wash stage, where sustained high impact jetting ensures the washing quality of the vat.

As with our commercial and industrial washing machines, our vats washers are designed with all the hygienic features and principles, thus minimizing energy usage and washing time.

WASHING MACHINES

Features

• stainless steel construction.• Recirculated hot wash system.• Rotating spray nozzle’s.• manual doors.

Options

• steam gas or electric heating.• lid washing sections.• Double capacity machine available.• chemical dosing system.


Combination Vat & Buggy Washerscm process solutions range of combination vat and buggy washers are a versatile design to facilitate the washing of dump buggies or vats in one machine

the machine can be supplied in either a single or double bay design to accommodate various throughputs.

it is designed with a special lifting cradle so it can wash either a 400lb/600lb buggy or a large vat or bulk container in one cycle

the double bay design can wash both a 400lb/600lb buggy and a large vat or bulk container in one cycle.

Heating of the tanks can be achieved by means of steam, gas or electric, multiple programmable wash cycles are included which gives the operator the option to select a wash cycle specific to the level of soiling on the bin.

standard filtration is fitted, but for heavy soiling products such as ground beef, rice or poultry then automatic filtration can be added.

WASHING MACHINES

Features

• stainless steel construction.• stainless steel filter system.• Electrical interlocked doors.• stainless steel control panel.• sustained 360 jetting.

Options

• steam, gas or electric heating.• Automatic filtration.• Exhaust system.• chemical dosing system.• Recirculated heated rinse.


Rack & Smoke Truck Washerscm process solutions produce a variety of models designed to clean a wide range of cooking racks and smoke trucks, meeting the requirements and needs of all types of facilities.

our models consist of a single and double capacity batch washer or for increased production and high throughput requirements; we can offer a continuous design. All our models can either be pit mounted or floor mounted, floor mounted models are provided with a ramp.

our batch machines can be supplied with a single door for loading/unloading or can be supplied as a pass through design for a dirty to clean operation or raw to cooked operation.

stainless steel construction, high specification filtration and a powerful accurate jetting system guarantees a peak cleaning performance throughout the machines working life.

Features

• compact and hygiene-conscious design.• Re-circulated wash systems for economical

operation.• High impact Jetting.• Varying wash programming to suit soiling

levels.

Options

• Gas steam or electric heating.• pit or floor mounted.• pass through designs.• Re-circulated heated rinse tank.• Drying systems.

WASHING MACHINES


Pallet Washerscm process solutions range of pallet washers can be supplied as manually loaded units or as a complete system, using automatic de-stacking and re-stacking of pallets.

All our machines are designed with optimum hygiene in mind thus enabling them to be used in sectors serving the food, pharmaceutical and logistic industries.

Scale Bucket Washerscm process solutions range of scale bucket washers are designed to effectively wash and sanitize detachable items such as scale buckets or feeder pans.

the machines are designed with a custom rack that slides in out of the machine for unloading and loading; it can be positioned on the floor or on the mezzanine next to the multi head scale.

Features

• stainless steel hygienic construction.• Re-circulated hot water wash tank.• Electrical interlocked service covers.

Options

• Gas, steam or electric heating.• Drying options.• push through or conveyorised.

Features

• stainless steel hygienic construction.• custom built loading and unloading frame.• High specification filtration.• suitable for all industries including snack food,

confectionary and vegetable packing.

Options

• total wash and dry systems for up to 48 buckets per load.

• Gas, steam or electric heating.• Re-circulated heated rinse systems.

WASHING MACHINES


Utensil Washerscm process solutions range of EDi machines consist of five models, each one being capable of satisfying the washing requirements of the bakery, butchery, catering and small food industry sectors.

the machines are constructed in satin finished 304 grade stainless steel and are double skinned for insulation and operator safety.

All machines are front loading via a well balanced, easy open door. stainless steel rotary wash and rinse arms clean the utensils loaded into the stainless steel wash rack, which can also be modified to hold a specific type or shape product.

WASHING MACHINES


the machines are designed with high levels of hygiene in mind; the interior of the machine is completely rounded with no right angles.

there are removable stainless steel baskets for filtration and a filter is installed to protect the wash pump.

the EDi is digitally controlled by means of a controller housed in the front of the machine where cycle times, wash temperature and other parameters can easily be changed. the display also includes the current wash cycle status and tank temperature.

WASHING MACHINES


400Lb Buggy Mixer & Tumblerthe unique and innovative GBt300 is designed to offer a revolutionary way for companies to mix, blend and marinate there product within a standard stainless dump buggy.

the GBt300 with its innovative design has no rotating blades or paddles and still allows the mixing of delicate products such as salads, rice, pastas, cereals and vegetables and ensures there is little or no product damage.

the GBt300 is supplied with a vacuum system so that protein products such as chicken, beef or pork can be marinated within a stainless steel 400lb buggy.

the tumbler is fully guarded and the door is electrically interlocked to ensure operator safety.

MIXING TUMBLER


MIXING TUMBLER

Features

• stainless steel construction• innovative mixing and blending solution.• Hmi for storing multiple pre set recipes• Vacuum system for brining and marinating.

Before mixing meat

Before mixing rice & vegetables

Before mixing vegetables

After mixing meat

After mixing rice & vegetables

After mixing vegetables


Dump Buggy Scale SKV 200 ESVthe sKV 200 EsV is used to weigh ingredients or products inside a 400lb buggy.

it can be supplied with a manual lift operation or alternatively a pneumatic lift up design.

the scale can also be manufactured to suit barrels, small containers, or other fields of applications such as large vats.

Features

• 304 Grade construction• mettler toledo load cell and display.• Finished with a smooth sand blast finish. SKV 200 ESV

Features

• 304 Grade construction.• can be either mobile or fixed.• can be adaptable to hold a 600lb buggy or

any other container.• Finished with a smooth sand blast finish.

SKV 200 HA 90T

SKV 200 HA 90T

(side view)

Dump Buggy Tipper SKV 200 HA90Tthe sKV 200 HA90t is used principally for tipping 400lb dump buggy’s, it can also be adapted to suit barrels and other small containers.

it has a low tipping height and is commonly used for tipping meat products onto a table or a conveyor for inspecting or sorting.

LIFTING & TIPPING


LIFTING & TIPPING

Column Lifter/Tipper SKV 300 C3the sKV 300 c3 is a single column lift with a combined lifting and tipping function to convey both the 400lb & 600lb buggy’s to forming machines.fillers,grinding machines and mixers.

the sKV 300 c3 can be supplied in either a mobile or bolt down execution.

Features

• Fail safety chain system.• Adaptable to suit a wide range of

containers.• optional adjustable tipping height in 2”

increments.• mobile or bolt down execution.• Finished with a smooth sand blast finish.

400lb & 600lb Dump Buggy’scm process solutions supply both the 400lb & 600lb dump buggy’s, they are designed to interface with equipment such as lifters & dumpers, table top tippers, washing machines and scale units.

Features

• stainless steel 304 grade construction.• completely electro polished.• Reinforced base design.• complete with handle and front drip plate.

SKV 300 C3


Vat Lifter/Tipper SK 800 HAthe sK 800 HA is used to empty large containers, such as stainless steel vats (dolavs) or combo pallets, onto table height equipment.

it is particularly efficient and well suited for unloading products on to a conveyor or inspection tables.

the sK 800 HA can be manufactured to suit either a rear loading application or a side loading application, for safety reasons all driving and operating functions are fully enclosed and guarded to ensure operator safety.

Features

• stainless steel construction.• Ergonomic, easy to clean design.• Hydraulically operated.• Adaptable for a wide range of containers.• side or rear loading.• optional electrical interlocked loading doors.

High Level Lifter/Tipper SK 800 MKthe sK 800mK is a powerful lifting and tipping tool for the food industry, it can handle large containers for unloading into machines such as formers, fillers, grinders, mixers, and also multi head weighing systems.

this two column lift can be adapted to suit a range of containers such as 400lb and 600lb buggy’s, barrels, combo pallets, and also custom made containers.

the machine comes as standard with a stainless steel safety cage with two electrical interlocked doors.

Features

• stainless steel 304 grade construction.• twin column design.• Fitted with a safety cage as standard.• can be used to service multiple hoppers by

mounting on wheels.• Finished with a smooth sand blast finish.

SK 800 HA

SK 800 MK

LIFTING & TIPPING


APRON WASH SYSTEMS

SWK/R

SWKSWK/XL

Apron Cleaning Machine SWMthe sWm is designed for quick and effective cleaning of work aprons by means of two automatic brushes.

Features

• Ergonomic easy to clean construction.• sensor operated design.• Adjustable detergent injector system.• Brushes are removed without the use of tools.• Finished with a smooth sand blast finish.

Apron And Boot Washing Cabinet SWKthe sWK is designed for manually washing aprons boots and other small objects.

After the aprons are hung, dirt is removed by using a manual hand held brush with intergral water supply.

Features

• stainless steel construction.• Double capacity sWK/Xl.• stainless steel grids.• optional rotating sole cleaner.• Finished with a smooth sand blast finish.


Hand Wash Basins BW2/BW2Fthe BW2 range of wash basins are manufactured from 304 grade stainless steel, they are available in three activation designs: 1) mains supply sensor operated, 2) battery operated sensor operated or 3) manual knee valve activation.

Features

• stainless steel 304 grade construction.• continuously welded design.• chrome plate faucet with jet regulator.• Available in both wall or floor mounted design.• optional paper towel and soap dispenser.

Soap Or Sanitizer Dispenser USPthe usp is manufactured from stainless steel and is designed to dispense soap or sanitation solution on the employee’s hands.

Features

• stainless steel construction.• Front plate equipped with a lock and filling

pointer.• Wall fastening kit and refillable solution

container.• can be fitted direct to the wall or sink.

BW2BW2/F

HAND WASH SINKS


HAND WASH SINKS

Hand Wash Sinks cm process solutions range of hand wash sinks are manufactured from 304 grade stainless steel and are continuously welded.

they are supplied in various different designs such as wall or pedestal mounted or even a double side execution.

the sinks are supplied with a chrome plated faucet with a jet flow regulator.

they can be initiated by a simple knee push valve or via a sensor.

Features

• stainless steel 304 grade construction.• 2 – 6 man capacity.• Double sided design allows maximum of

12 people.• complete with faucet.• optional paper towel dispenser.


Apron Hanging Rack SZTthe sZt is a compact hanging frame designed for the storage of aprons.

it is manufactured from 304 grade stainless steel and is available in two designs, floor or wall mounted.

the hangers can be removable or completely encapsulated with capacity to hold up to 35 aprons.

Stainless Steel Lockers KSDthe KsD range of lockers are manufactured from 304 grade stainless steel and are designed for the safe storage of operators personal effects or ppE.

the slanting top design ensures easy wash down and prevention of storage of unwanted items.

they can be supplied with a built in bench and are manufactured with either perforated or solid doors.

Options

• Different styles of locking padlock, key or coin operated.

• Various formations and configurations.• optional internal shelve design with

coat hook.• can be supplied with or without a

changing bench.

CHANGING ROOM


CHANGING ROOM

Boot Storage Rack STTthe storage racks are designed for their safe storage of employee’s boots.

Racks have a capacity range of between 10 and 30 pairs per side.

Features

• constructed from 304 grade stainless steel.• mobile, static or wall mounted design.• can be supplied so the boot locks in place.• single or double sided.

Boot Dryer HSTTthe Hstt is designed for drying the insides of the employee’s boots, ambient air is fed and warmed via an electronic element and blown through the boot rods; therefore drying the boots.

the drying time is fully adjustable.

Features

• 304 Grade stainless steel construction.• 10 – 30 pair capacity.• can be supplied wall or floor mounted.

Boot Drying Cabinetthe cabinet works on the same principle as the Hstt, a hot air dryer is integrated with in a stainless steel cabinet.

the cabinet is supplied with stainless steel sliding doors and a slanting top which allows for placement in a wash down area.

it has a capacity of 30 pairs of boots.

advanced hygiene solutions from

1269PomonaRoad,Suite112-113•Corona,CA92882Tel:(951)808-4376•Fax:(951)808-8657

www.cmpsolutions.net•[email protected]

Documents

CMPSolutions Brochure WEB