4
LESSON PLAN CHE574 CHEMICAL ENGINEERING LAB III FACULTY OF CHEMICAL ENGINEERING UNIVERSITI TEKNOLOGI MARA 1.0 COURSE INFORMATION COURSE NAME : CHEMICAL ENGINEERING LAB III COURSE CODE : CHE574 PROGRAM : EH220 SEMESTER : 4 CREDIT HOURS : 1 CONTACT HOURS : 3 PRE-REQUISITE : NIL 2.0 SYNOPSIS Chemical Engineering Laboratory III is a continuation of the previous Chemical Engineering Laboratory I and II works. This course covers experiments related to chemical reactions that occur in various reactors types as well as separation processes. 3.0 OBJECTIVES Upon completion of this course, students should be able to: 1. Identify laboratory procedures. 2. Analyze experimental units. 3. Evaluate the experiments in relation to the fundamental theories and concepts. 4.0 METHODS OF INSTRUCTION Laboratory experiments, consultation for open-ended lab & report writing: 3 hours/week 5.0 LESSON PLAN Week Duration Title of Experiment Activities 1 1 Briefing Introduction to the course, safety aspects, lab rules and regulations etc. 2 1 Consultation Designing the experiment 3 1 Experiment 1 Conducting the experiment Analyzing the experimental data Writing the laboratory report 4 1 Consultation Designing the experiment 5 1 Experiment 2 Conducting the experiment Analyzing the experimental data Writing the laboratory report

CHE574 Lsdfesson Plan Mac 2015

Embed Size (px)

DESCRIPTION

sdfdsf

Citation preview

Page 1: CHE574 Lsdfesson Plan Mac 2015

LESSON PLAN

CHE574

CHEMICAL ENGINEERING LAB III

FACULTY OF CHEMICAL ENGINEERING

UNIVERSITI TEKNOLOGI MARA

1.0 COURSE INFORMATION

COURSE NAME : CHEMICAL ENGINEERING LAB III

COURSE CODE : CHE574

PROGRAM : EH220

SEMESTER : 4

CREDIT HOURS : 1

CONTACT HOURS : 3

PRE-REQUISITE : NIL

2.0 SYNOPSIS

Chemical Engineering Laboratory III is a continuation of the previous Chemical Engineering

Laboratory I and II works. This course covers experiments related to chemical reactions that

occur in various reactors types as well as separation processes.

3.0 OBJECTIVES

Upon completion of this course, students should be able to:

1. Identify laboratory procedures.

2. Analyze experimental units.

3. Evaluate the experiments in relation to the fundamental theories and concepts.

4.0 METHODS OF INSTRUCTION

Laboratory experiments, consultation for open-ended lab & report writing: 3 hours/week

5.0 LESSON PLAN

Week Duration Title of Experiment Activities

1 1 Briefing Introduction to the course, safety

aspects, lab rules and regulations etc.

2 1 Consultation Designing the experiment

3 1 Experiment 1 Conducting the experiment

Analyzing the experimental data

Writing the laboratory report

4 1 Consultation Designing the experiment

5 1 Experiment 2 Conducting the experiment

Analyzing the experimental data

Writing the laboratory report

Page 2: CHE574 Lsdfesson Plan Mac 2015

LESSON PLAN

CHE574

CHEMICAL ENGINEERING LAB III

FACULTY OF CHEMICAL ENGINEERING

UNIVERSITI TEKNOLOGI MARA

6 1 Consultation Designing the experiment

7 1 Experiment 3 Conducting the experiment

Analyzing the experimental data

Writing the laboratory report

8 1 Consultation Designing the experiment

9 1 Experiment 4 Conducting the experiment

Analyzing the experimental data

Writing the laboratory report

10 1 Consultation Designing the experiment

11 1 Experiment 5 Conducting the experiment

Analyzing the experimental data

Writing the laboratory report

12 1 Consultation Designing the experiment

13 1 Experiment 6 Conducting the experiment

Analyzing the experimental data

Writing the laboratory report

14 1 All experiments TEST

Student should carry out minimum six (6) experiments which consist of three (3) open-ended

experiments and another three (3) for normal procedural experiments. The following are the

equipments available for experiments:

1 Gas Absorption Unit

2 Gas Adsorption Unit

3 Gas Diffusion Unit

4 Continuous Stirred Tank Reactor (CSTR)

5 Continuous Stirred Tank Reactor (CSTR) in series

6 Plug Flow Reactor

7 Continuous Stirred Tank Reactor (CSTR) – Pilot Size (40L)

8 Tubular Flow Reactor

Student should carry out minimum six (6) of the above experiments during the semester. In case of

any above experiments is not available, alternative experiments or special assignment(s) shall be

conducted.

For selected open-ended experiments, the activities should include:

1. Preparing experimental procedure based on Standard Operating Procedure (SOP) of each

equipment.

2. Discussion/consultation with lecturer and lab technician/lab assistant on experimental

procedure and suitability of chemicals/materials to be used.

Page 3: CHE574 Lsdfesson Plan Mac 2015

LESSON PLAN

CHE574

CHEMICAL ENGINEERING LAB III

FACULTY OF CHEMICAL ENGINEERING

UNIVERSITI TEKNOLOGI MARA

6.0 ASSESSMENT

Lab reports : 60%

Test : 20%

On-site continuous assessment : 20%

TOTAL 100%

7.0 REFERENCES

1. Fogler, H. S. (2005). Elements of Chemical Reaction Engineering (4th Edition). Upper Saddle

River : Prentice Hall.

2. McCabe, W.L., Smith, J.C. & Peter H. (2004). Unit Operation of Chemical Engineering (7th

Edition). New York : McGraw-Hill.

3. Perry, R.H. & Green, D.W. (2007). Perry's Chemical Engineers' Handbook (8th Edition).

New York : Mc-Graw Hill.

4. Seader, J.D. & Henley, E.J. (2005). Separation Process Principles (2nd Edition). New York :

John Wiley & Sons Inc.

5. Sinnot, R.K. (2005). Chemical Engineering Design: Chemical Engineering Volume 6

(Coulson & Richardson’s Chemical Engineering) (4th Edition). Oxford : Butterworth-

Heinemann.

8.0 ADDITIONAL INFORMATION

1. Laboratory experiment and consultation will be carried out in alternate weeks.

2. Attendance is compulsory.

3. No make-up will be allowed unless for medical excuses with legal documents presented.

4. Students are required to design the experiment based on the problem statements given and

consult with the lecturer one week before conducting the experiment.

5. Students are required to repeat the experiment if the results are unsatisfactory.

6. Late submission of laboratory report and any form of cheating, copying and/or plagiarism

will be penalized.

9.0 OTHER INFORMATION/DETAILS

PREPARED BY: APPROVED BY :

SIGNATURE :

NAME: RABIATUL ADAWIYAH ABDOL AZIZ/

SITI KHATIJAH JAMALUDIN/ NURHASLINA

CHE RADZI

POSITION : LECTURER

DATE : 2/3/2015

SIGNATURE :

NAME: DR NORLIZA IBRAHIM

POSITION: HEAD OF STUDIES CHEMICAL

ENGINEERING AND SCIENCES

DATE: 2/3/2015

Page 4: CHE574 Lsdfesson Plan Mac 2015

LESSON PLAN

CHE574

CHEMICAL ENGINEERING LAB III

FACULTY OF CHEMICAL ENGINEERING

UNIVERSITI TEKNOLOGI MARA

COURSE OUTCOMES

PROGRAM OUTCOMES TEACHING METHODOLOGY

ASSESSMENT

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12

1. Identify laboratory procedures.

3 3 Lab Experiments

Lab Report, Test, Rubrics

2. Analyze experimental units.

3 3 Lab Experiments

Lab Report, Test, Rubrics

3. Evaluate the experiments in relation to the fundamental theories and concepts

3 3 Lab Report, Test, Rubrics

RATING ON OBJECTIVE IN RELATION TO PROGRAM OUTCOMES : (1) VERY SLIGHTLY (2) MODERATELY (3) SUBSTANTIVELY