C. Section II _Product@Design Devenlopment (Pg.8-Pg.21)

8/14/2019 C. Section II _Product@Design Devenlopment (Pg.8-Pg.21)

1/14

Section ii

Product & Design

Development

Hardware setup

Software used

Other related material

Planning/ strategy

Budget

Roles and responsibilities

of team member

Content

Process & procedures

Product evaluation

Progress calendar


2/14

Section ii Product & Design Development

9

During the industrial training at AYM Bistari I have been assigned for one project named as

Perak Halal Directory. Im lucky that the entire project assigned is multimedia-based project.

The project consists of two sub-projects that will be use as a medium of promoting the centre

which are:

Product design

Web Development

The aims of the project are as follows:

To assist and promote all manufacturer and developer of Halal product.

As list or guide to all that have own the Halal Certificate from Jabatan Agama Islam

Perak.

They are a number of requirements for each project need to follow. The requirement needed as:

II.I HARDWARE SETUP

Media Component

o 8x DVD-RW burner-writer

o BenQ Scanner 4200

o Pixma IP4000 printer


3/14


10

II.II SOFTWARE USED

Adobe Photoshop

Figure 1.0 : Adobe Photoshop CS2 Interface

Adobe Photoshop is use to fix a photo, cropping product, and create its background.

Basically, all design were created in photoshop (see figure 1.0). Its use RGB color format.

There are 3 version of photoshop that I has use

Adobe Photoshop 7.0 :

o Was use during the first two week. the most basic photoshop in photo design,

lighter and easy to use, but has a minimum function.


4/14


11

Figure 1.1: Adobe Photoshop Element 4.0 Interface

Adobe Photoshop Element 4.0

o This is special photoshop version created for photographer. Its has quick smart

photo repair function and auto red-eyes fix. Was use to fix photos and scanning

product.

Adobe Photoshop CS2

o This is an upgraded 7.0 photoshop version. Its has the same photoshop 7.0

interface but with more added effect function. This was the main graphic

application was use to create a design.


5/14


12

Adobe Illustrator

Figure 1.2: Adobe Illustrator CS2 Interface

Adobe Illustrator was use to create a listing and printing template. It use a CYMK color

format its also use to create the final design of the directory and publication.

Adobe Illustrator CS2

o This is an upgraded illustrator CS version. Any RGB product image from the

adobe photoshop will be converted into the CYMK color format for printing.


6/14


13

Figure 1.3: Adobe Bridge Interface

Adobe Bridge

o Use to preview all adobes and pictures files. Also can be use to synchronized files

and work.

Macromedia FlashPaper 2

o Use to create a virtual printer that used to create a print preview.

Microsoft Office (Word, Excel & Access)

o Use to create a database


7/14


14

II.III OTHER RELATED MATERIAL

Operation System

o Microsoft Windows Millennium Edition

o Microsoft Windows XP Professional (5.1.2600) Service Pack 2

Printing Paper

o Mitsubishi Photo Paper

o

Mitsubishi Inkjet Paper

Web Search engines

o Googles

o Flickr

o Yahoo

II.IV PLANNING/ STRATEGY

Before creating an artwork, I plan and do some research to get some information about the

product. Then I analyze the product and begin to create a several rough ideas of the product

placement and background design. My research source are collected from the internet, crusine

magazines, Cook book, tourism flyers and any related material that can be associated with the

product.

II.V BUDGET

Since the concept and any material for work are provided by the company, the budget for this

project is minimal and most of the budget goes to the marketing department.


8/14


15

II.VI ROLES AND RESPONSIBILITIES OF TEAM MEMBER

The Company has been appointed as project consultant to publish the second edition of Perak

Halal Directory as The First Edition was also given to AYM Bistari. My main duty during this

industrial training is to be responsible in designing advertisement to be published on classified

listing column of the directory. The size varies as below:

50mm x 35mm (Rm 150.00) Color



For the second edition, any purchases of advertisement under Quarter, Half and Full Page size

will also receives listing advertisement. Their sizes are varies as below:

Quarter page : 50mm x 50mm

Half & Full page : 70mm x 65mm

As a team, were encourage to work independently. However, we can still help each others when

needed and always maintain a good communicate with client or team members. My roles also to

insist the others members when needed or instructed.


9/14


16

II.VII CONTENT

Figure 1.4 : Classified Listing

The classified listing advertisement contain a list of halal product manufacturer profile such as

their company name, address, halal serial numbers, contact numbers and a short description of

their product, ( see figure 1.1.)

Any Halal Certificate holders that want to advertise their product needs to fill the advertisement

order form (see pg. 17). The information that they give will be us in the classified listing column.


10/14


17

Appendix 3

PERAK HALAL DIRECTORY 2008/2009

ADVERTISMENT ORDER FORM

Name 0f Organization:

Postal Address: ..............

..

Halal Certificate No.: ...

Contact Person: ..

EMail:

Expiry Date: ...............

Tel. No.: ,,.........

Fax No.: ..............

Product Description:

...

...

Exporter Yes Countries ....

No Interest to export your product. Yes, No.

I would like to order placement of:

Listing without image Rm100.00

50mm x 35mm Rm150.00 (colour)



Advertisement Full page Rm1500.00 (colour)

Half page Rm800.00 (colour)

Quarter page Rm500.00 (colour)

The following is enclosed:

Cheque (Bank )/ Money Order/ Bank Draft No.

..

Confirmation copy of remittance advice by bank (payment by direct bankin)

Film (s) + reference copy

Softcopy (CD, Floppy Disk)

This order is placed by (please fill clearly)

Authorized signature and name: .............

Position: ..


11/14


18

II.VIII PROCESS & PROCEDURES

The procedures and workflow of the Perak Halal Directory project focusing on the important

stuff where it help out in terms of reference as each step needs documentations and data keeping.

For the product design, The Hanaffin and Peck model design was used. (see figure 1.4) for the

whole process.

In the Hanaffin and Peck model, each phase has its own evaluation before proceding to next

phase.There are 3 process or phase need to be done before publishing the Perak Halal Directory.

1. Analysis

o After receving task, the information from the order form will be collected and

store in database/ notepad.

o If the company give or include a softcopy of their product in the order form, it

will be store in source_file

o For a hardcopy, it will be scan first and then fix in photoshop. Then it will be

store in source_files.

Phase 1: AnalysisPhase 2: Design Phase 3: Development

Evaluation & Repetition

Figure 1.4 : Hanaffin and Peck Design Model


12/14


19

o Then all the source files will be analize and beginning to create a rought ideas that

associated with the product.

2. Design

o Beginning to searching or collecting ang source picture that can be associated

with the ideas and product. Any medium can be use like internet, magazines,

flyers and many more.

o Then the product will be crop, trim and save in work_file. Then any related

material that can be associate with the product will be design as the background of

the product.

o All this design is created in adobe photoshop, at less 2 sample will be created

before it will be print and evaluated.

o This sample is printed in adobe illustrator, where the sample will be put in the

draf printing template.

3. Devenlopment

o After the product been evaluated, it will be printed again with its listing in adobe

illustrator. Then it will be evaluated again before it been submitted to their

respective company for their evaluation.

o If the design is accepted, then it will be published in Perak Halal Directory. But if

not, it will be repaired or redesign again untill it meets the client choice.

o Then it will be publish on the Perak Halal website. (http://www.perakhalal.com).


13/14


20

Figure 1.5 : workflow

Receiving Task

Analysis Task & Rough Sketch

Designing & Creating Sample

Choosing sample

Creating A Listing

Printing Listing

Evaluation

Sent Sample To Their Company

Company Evaluation

Publish In Halal Perak Directory

YES

YES

YES

NONO

NO


14/14


21

II.IX PRODUCT EVALUATION

Supervisors Evaluation

Students Name : Muhammad Harussani bin Abdul Manap

Students ID No. : 120505010

Training Duration : 21st

January 2008 to 29th

March 2008

Company Name : AYM BISTARI

Address : 17A Medan Istana 6

Bandar Ipoh Raya

30000 Ipoh

Perak Darul Ridzuan

Overall training evaluation. Please circle the appropriate range* (1 to 5)*Range: 5 Excellent, 4 Good, 3 Satisfactory, 2 Below Average, 1 Weak

(i) Attendance : 1 2 3 4 5

(ii) Co-operation : 1 2 3 4 5

(iii) Communication Ability : 1 2 3 4 5

(iv) Association : 1 2 3 4 5

(v) Adaptation : 1 2 3 4 5

(vi) Knowledge : 1 2 3 4 5

(vii) Originality : 1 2 3 4 5

(viii) Design : 1 2 3 4 5

(ix) Industrial Skills : 1 2 3 4 5

(x) Quality of Work : 1 2 3 4 5

TOTAL (I + ii + + viii) : /50

Comments or suggestions :

supervisors signature :

Date :

Documents

C. Section II _Product@Design Devenlopment (Pg.8-Pg.21)