Upload
others
View
9
Download
0
Embed Size (px)
Citation preview
A R C H I T E C T U R A L
S U S T A I N A B L E
R E P U T A B L E
C-BRICK CONCRETE MASONRY UNITS
design with the beauty of brick
while benefiting from the economy
and flexibility of concrete
masonry units
PERFORMANCE & SUSTAINABILITY
C-Brick has the ability to perform with all the
durable characteristics that a concrete masonry
unit has to offer. The structural integrity of C-Brick
allows designers to remain confident in the
longevity and life cycle of any project. C-Brick
is integrally colored, it is not just an applied face
which is prone to fading over time.
ATTRACTIVE & ECONOMICAL
C-Brick Concrete Masonry Units offer a truly
unique alternative to clay brick, while still
providing an appealing brick-like appearance.
C-Brick also allows customers to benefit from
reduced costs in many ways by providing a
concrete masonry unit that can function as a
single-wythe wall instead of a veneer type wall.
DESIGN FLEXIBILITY
Whether designed as a veneer or a through the
wall single-wythe load bearing wall system,
C-Brick delivers amazing results. C-Brick can
function as a finished wall surface on one or
both faces, making it a superior choice for sound
barriers, screen walls, or on buildings where the
look of brick is required on both the interior and
exterior walls. Refer to specifications on page 4
for ASTM requirements that are always
exceeded with C-Brick manufactured by Grand
Blanc Cement Products.
AUTUMN BLEND CIMARRON BLEND DESERT BLEND
FIRESTORM BLEND
HERITAGE BLEND
GREAT LAKES BLEND GRANDVILLE BLEND
OLD TUDOR BLEND
S.E.D. BLEND
SAVANNAH BLEND
"C - Brick" Masonry Units PART 2 - PRODUCTS MORTAR BED & JOINTING
Specifications PRODUCT NAME Units shall be laid w ith full
"C - Brick" Masonry Units mortar coverage on head and
PART 1 - GENERAL bed joints w ithout blocking cores.
SUBMITTAL SIZES AND SHAPES All joints shall be tooled w hen
Submit color samples for Hollow Units: 4 x 4 x 16, 6 x 4 x 16 finger-print hard into a concave
selection from manufacturer's 8 x 4 x 16, 10 x 4 x 16, 12 x 4 x 16 shape. Remove mortar from
group. Submit product literature, Solid Units: 4 x 4 x 12, 4 x 4 x 16 the face of masonry before it
certif ications, test reports and 4 x 4 x 24 sets. Tuck-point all joints of
full size samples of each color Solid Wall Caps: 8 x 4 x 16 scored units for creating proper
that is specif ied. 12 x 4 x 16 appearance. All exterior scored
units must be tuck-pointed to
QUALITY ASSURANCE MANUFACTURER prevent w ater penetration. DO
Certif ications: "C - Brick" Grand Blanc Cement Products, Inc. NOT RAKE JOINTS.
Masonry Units shall comply w ith 10709 S. Center Road
recommendations of the National Grand Blanc, MI 48439 FINAL CLEANING
Concrete Masonry Association, P 800-875-7500 F 810-694-2995 During the installation process,
and conform to ASTM C90, for www.grandblanccementproducts.com w alls should be kept as clean
hollow and solid load bearing as possible by using brushes,
units. "C - Brick" Masonry Units PART 3 - EXECUTION sponges, etc. Never allow
shall be normal w eight block, LAYING MASONRY WALLS excess mortar or smears to
w ithstanding compression test All "C - Brick" Masonry Units harden on the f inished surfaces
loads of at least 3,000 psi for shall be draw n from more than of block. Avoid using harsh
individual units, or 3,500 psi for one pallet at a time and must cleaning methods that w ill
an average of f ive units; basing be laid using the best concrete result in damaged or marred
load f igures on the average net masonry practices. Lay block surfaces. Alw ays pre-w et w all
area of the blocks. Units shall w ith the faces level, plumb and w ith potable w ater to avoid
meet or exceed requirements true to the mason line strung streaking of w all surface. Use
for ASTM C55-06e1. "C - Brick" horizontally at the f inished side individuals that are experienced
Masonry Unit samples shall be of the block. Both horizontal in cleaning Decorative Masonry
submitted for establishing an and vertical joints should be Units and clean f inished w alls
approved color and texture. 3/8" on the f inished side of the w ith Custom Masonry Cleaner
w all. Joints should be neatly by PROSOCO. Manufacturer's
WATER REPELLENT and uniformly tooled after instructions should be strictly
All "C - Brick" Masonry Units they are f inger-hard. Cut pieces follow ed for cleaning including
shall be manufactured w ith should be sized and placed a complete and thorough rinse.
Acme Shield Integral Water properly to maintain bond and Permanent damage to the
Repellent w hen used for exterior consistency. block could result if the exact
w all construction. Acme Shield instructions are not adhered to.
shall comply w ith ASTM E514-74 INSTALLATION
for w ind and rain resistance. Lighting: Alw ays use adequate Note: Consult NCMA TEK NOTES
Acme Shield Mortar Admix lighting for masonry w ork. regarding proper installation techniques
shall be incorporated w ith all For even and consistent for concrete masonry.
mortar used in the installation illumination, alw ays place
of "C - Brick" and shall conform lights at a reasonable distance
to ASTM E7-72-74 for bond from the w all. For best results,
strength to "C - Brick" Units. do not use trough lighting.
RELATED INFORMATION Cutting: Use the correct type
Fire Resistance:Hourly f ire rating of motor driven masonry saw s
information, defined and required to make all cuts, including
by NCMA TEK NOTES, available those for bonding, holes, boxes G r a n d B l a n c
at w w w .grandblanccement.com. etc. Use diamond or abrasive CEM ENT PRODUCTS
blades and make neat cuts to 10709 S. Center Rd.
Mortar: Type S Natural Gray provide the best appearance. Grand Blanc, MI 48439
mortar is recommended for all Ph: 800-875-7500 Fax: 810-694-2995
"C - Brick" Masonry Units. w w w .grandblanccementproducts.com