DI Brick in the Wall: Wall Luminaires

WALL LUMINAIRES

Calcyt®

Plaster with a high density and purity

"BRICK IN THE WALL® " developed it's own CALCYT® plaster with amazing characteristics. CALCYT® is a high density, heat resistance,next generation plaster, with optimal hardness and light reflexion properties. Our continuous research results in the productionof CALCYT® fixtures without air holes, assuring no cracks after installation. Due to it's thermal resistance,CALCYT® fittings aresuitable for many different light sources.The snow white CALCYT® fixtures can easily be painted in the colour of your wall or ceiling ! This facilitate the seamless integrationof our bordeless CALCYT® fixtures into each and every interior.

CALCYT® is a registered trade mark of BRICK IN THE WALL®

Atmos 4

Expression 8

Impression 14

Small 34

Wave 18

Normall 38

Move Out 20

Big 44

XT 48

Move In 26

Moor 50

Slim 30

�� All cutout dimensions are approxmate.Use plaster kit as template.

4 | d e s i g n p l a n / B R I C K I N T H E WA L L

The ATMOS creates a pattern of movement by emitting a ray of light from an incision in the architecture. The seamless plaster fixture can be installed as a wall-washer with the light beam at the top or the bottom. Soft, undulating wave shapes exiting and entering the wall give the architect an unlimited freedom. The Atmos is foreseen with a special designed printed circuit board for the new generation of the ‘Rebel’ led with integrated electronics, to obtain a maximum light output with an optimal heat release. The shape ensures perfect light distribution. The use of colored LEDs allows the architect to personalize his project. ETL listed class II. Requires remote 350mA power supply. The Atmos can be directly installed in a brick wall or in gypsum by means of an optional plaster kit.

ATMOS

DES

IGN

BY

CA

RL

DEV

OLD

ER

d e s i g n p l a n / B R I C K I N T H E WA L L | 5

ATMOS19.84”

19.8

4”

2.4”

REF. N° : 145 29 100 : 3000°KREF. N° : 145 29 000 : 2700°KREF. N° : 145 29 500 : 2200°K

1x Luxeon Z-ES LED350mA - 7W. Power supply not included (see cutsheet). Cutout 19.84” x 19.84” listed IP20.

For direct mounting in solid walls or in gypsum walls by means of an optional plasterkit (Ref. N° 745 01 000).Colour : paintable plasterEquipped with a clear acrylic lens.Can be installed with the LED’s at the top or bottomOther colours available on requestRequires remote 350mA power supply

ATMOS PLASTERKIT

19.84”

19.8

4”

2.4”

REF. N° : 745 01 000For mounting into gypsum wallsCutout 19.84” x 19.84”Housing : perforated aluminium




The Expression has an innovative design language of its own. It can be combined with the Impression to create beautiful wave shapes fading in and out of the architectural space. A structured polycarbonate cover provides an optimal light distribution. The Expression is available in ‘Mono’ version, used as an up or down light, or in ‘Duo’ version (both up and down light). The combination of both versions gives the architect unlimited freedom. The Expression can be directly installed in a brick wall or in gypsum by means of an optional plaster kit.

EXPRESSION

DES

IGN

BY

CA

RL

DEV

OLD

ER


50.79”

49.61”

4.3

3”

4.3

3”

3.1

5”

3.54” 3.15”

3.1

5”

50.79”

49.61”

4.3

3”

4.3

3”

3.1

5”

3.54” 3.15”

3.1

5”

For direct mounting in solid walls or in gypsum walls by means of an optional plasterkit (Ref. N° 718 01 000).Colour : paintable plaster - lampunit : galvanized steelOptional laminated colour cover on request (Ref. N° 518 01 005)Can be installed with the opening at the top or bottom

EXPRESSION PLASTERKIT

4.4

9”

50.94”

3.58”


EXPRESSION MONO T5 21 39W T5HO DIM

REF. N° : 318 15 021 ( ADD SUFFIX FOR WATTAGE, 21 OR 39)1× 21W T5 or 1x 39W T5HO specify wattage (lamp by others)Integral electronic universal voltage ballast 120V-277V. ETL listedCutout 49.61” x 4.33”

REF. N° : 318 18 021( ADD SUFFIX FOR WATTAGE, 21 OR 39)1× 21W T5 or 1x 39W T5HO specify wattage (lamp by others)Integral electronic dimming ballast 120V or 277V. Specify voltage. ETL listedCutout 50.79” x 4.33”

EXPRESSION MONO T5 21 39W T5HO


50.79”

49.61”

4.3

3”

4.3

3”

3.1

5”

3.54” 3.15”

3.1

5”

50.79”

49.61”

4.3

3”

4.3

3”

3.1

5”

3.54” 3.15”

3.1

5”


EXPRESSION DUO 21WT5 or 39W T5HO

EXPRESSION DUO 21WT5 or 39W T5HO DIM

REF. N° : 319 15 021 ( ADD SUFFIX FOR WATTAGE, 21 OR 39)1× 21W T5 or 1x 39W T5HO specify wattage (lamp by others)Integral electronic universal voltage ballast 120V-277V. ETL listedCutout 50.79” x 4.33”

REF. N° : 319 18 021 ( ADD SUFFIX FOR WATTAGE, 21 OR 39)1× 21W T5 or 1x 39W T5HO specify wattage (lamp by others)Integral electronic dimming ballast 120V or 277V. Specify voltage. ETL listedCutout 50.79” x 4.33”





Transform your interior with the Impression. The basic idea of the Impression (possibly in combination with the Expression) is to create unexpected and inspiring plaster fixtures with light and shape as a true amalgam with the architecture. The Impression can be used with the lamp at the top or at the bottom. Optional laminated colour covers give a personal touch and accent to your interior. The Impression can be directly installed in a brick wall or in gypsum by means of an optional plaster kit.

IMPRESSION

DES

IGN

BY

CA

RL

DEV

OLD

ER


50.79” 3.74”

3.15”

7.1

3”

3.1

5”

7.1

3”

3.74”

3.1

5”

3.3

9”

50.79” 3.74”

3.15”

7.1

3”

3.1

5”

7.1

3”

3.74”

3.1

5”

3.3

9”

For direct mounting in solid walls or in gypsum walls by means of an optional plasterkit

(Ref. N° 717 01 000).Colour : paintable plaster - lampunit : galvanized steelOptional laminated colour cover on request (Ref. N° 517 01 005)Can be installed with the opening at the top or bottom

IMPRESSION PLASTERKIT

7.2

8”

50.94”

3.78”


IMPRESSION 21/39 21WT5 or 39WT5HO

IMPRESSION 21/39 21WT5 or 39WT5HO DIM

REF. N° : 317 15 021 (ADD SUFFIX FOR WATTAGE, 21 OR 39)1× 21W T5 or 1x 39W T5HO specify wattage (lamp by others)Integral electronic universal voltage ballast 120V-277V. ETL listedCutout 50.79” x 713”

REF. N° : 317 18 021 ( ADD SUFFIX FOR WATTAGE, 21 OR 39)1× 21W T5 or 1x 39W T5HO specify wattage (lamp by others)Integral electronic dimming ballast 120V or 277V. Specify voltage. ETL listedCutout 50.79” x 7.13”




The Wave reveals itself by emitting a ray of light out of the wall. This seamless plaster fixture can be installed as a wall-washer with the lamp at the top. The luminaire can be also used to illuminate circulation zones. An optional laminated colour cover allows the architect to personalize his project. The Wave can be directly installed in a brick wall or in gypsum by means of an optional plaster kit.

WAVE

DES

IGN

BY

CA

RL

DEV

OLD

ER




11

.28

”

9.8

4”

2.24”

2.76”

11.2

2”

26.1”

27.28”

11

.28

”

9.8

4”

2.24”

2.76”

11.2

2”

26.1”

27.28”


WAVE PLASTERKIT

27.44”

11.3

8”

2.80”


WAVE 14WT5 or 24WT5HO

WAVE 14WT5 or 24WT5HO DIM

REF. N° : 316 15 024 (ADD SUFFIX FOR WATTAGE, 14 OR 24)1× 14W T5 or 1x 24W T5HO specify wattage (lamp by others)Integral electronic universal voltage ballast 120V-277V. ETL listedCutout 27.28” x 11.22”

REF. N° : 316 18 024 ( ADD SUFFIX FOR WATTAGE, 14 OR 24)1× 14W T5 or 1x 24W T5HO specify wattage( lamp by others)Integral electronic dimming ballast 120V or 277V. Specify voltage. ETL listedCutout 27.28” x 11.22”


The Move Out has an innovative design of its own. The plaster fixture disappears smoothly and seamless into the architecture and creates a non-disturbing light beam. The Move Out guarantees a total disappearance into the wall where only the light beam can be noticed. The soft light curves add a new rhythm to the architecture and fade into infinity. The Move Out is foreseen with a special designed printed circuit board for the new generation of the ‘Rebel’ led with integrated electronics, to obtain a maximum light output with an optimal heat release. The lenses ensure a perfect light distribution. The use of colored LEDs allows the architect to personalize his project. ETL listed class II. Requires remote 24V DC power supply. The Move Out can be directly installed in a brick wall or in gypsum by means of an optional plaster kit.

MOVE OUT

DES

IGN

BY

CA

RL

DEV

OLD

ER


17.3

2”

0.43”

2.68”

7.87”

11.41”

11.1

4”

For direct mounting in solid walls or in gypsum walls by means of an optional plasterkit (Ref. N° 721 01 000).Colour : paintable plaster - lampunit galvanized steelCan be installed with the LED’s at the top or bottomRequires remote 24V DC power supply

MOVE OUT PLASTERKIT

11.57”

17.4

8”

2.72”


MOVE OUT

IP54 Damp label version on requestREF. N° : 121 20 101 : Warm White (3000°K)REF. N° : 121 20 201 : Neutral White (4000°K)REF. N° : 121 20 301 : Royal Blue

REF. N° : 121 20 100 : Warm White (3000°K)REF. N° : 121 20 200 : Neutral White (4000°K)REF. N° : 121 20 300 : Royal Blue5× Rebel LED For dimmable 0-10V “5x Rebel LED” change catalog numbers from “XXX 20 XXX” to “XXX 60 XXX”.24VDC - 10W. Power supply not included. ETL listed.Cutout 7.87” x 17.32”




The Move In is a small and elegant luminaire that can be perfectly integrated into any interior thanks to its simplicity. The minimalist design creates an environment of pure and simple lines. The Move In is available with high power LEDs After integration of the plaster luminaire, the lamp module can easily be installed. ETL listed class II. Requires remote 24V DC power supply. The Move In can be directly installed in a brick wall or in gypsum by means of an optional plaster kit.

MOVE IN

DES

IGN

BY

CA

RL

DEV

OLD

ER


17.1

3”

10.24”

11.0

2”

7.2”

2.56”


MOVE IN PLASTERKIT

10.39”

17.2

8”

2.6”

REF. N° : 722 01 000For mounting into gypsum wallsCutout 10.43" x 17.32" Housing : perforated aluminium

MOVE IN

REF. N° : 122 20 100 : Warm White (3000°K)REF. N° : 122 20 200 : Neutral White (4000°K)REF. N° : 122 20 300 : Royal Blue5× Rebel LED24VDC - 10W. Power supply not included. For dimmable 0-10V “5x Rebel LED” change catalog numbers from “XXX 20 XXX” to “XXX 60 XXX”.Cutout 7.7” x 17.13” ETL listed.





The Slim is a small and elegant luminaire that can be perfectly integrated into any interior thanks to its simplicity. The minimalist design creates an environment of pure and simple lines. The LED light source allows the Slim to be used as a floor or ceiling washlight. The Slim is available with a specially designed printed circuit board for the new generation of the Xicato LED with integrated electronics, for a maximum light output with an optimal heat release. The lenses ensure a perfect light distribution. The use of colored LEDs allows the architect to personalize his project. ETL listed class II. Requires remote 350mA power supply. After integration of the plaster luminaire, the lamp module can easily be installed. The Slim can be directly installed in a brick wall or in gypsum by means of an optional plaster kit.

SLIM


21.4

6”

15.6

7”

5.1

2”

2.2”

3.54”

3.54”

For direct mounting in solid walls or in gypsum walls by means of an optional plasterkit (Ref. N° 707 01 000). Color : paintable plaster - lampunit galvanized steelCan be installed with the LED’s at the top or bottomRequires remote 350mA power supply

SLIM PLASTERKIT

21.6

1”

3.70”

3.58”

REF. N° : 707 01 000For mounting into gypsum wallsCutout 3.75' x 21.6"Housing : perforated aluminium

SLIM

IP54 Damp label version:REF. N° : 107 29 101 : Warm White (3000°K) REF. N° : 107 29 201 : Neutral White (4000°K) REF. N° : 107 29 001 : Super Warm White (2200°K)

REF. N° : 107 29 100 : Warm White (3000°K) REF. N° : 107 29 000 : Warmer White (2700°K) REF. N° : 107 29 500 : Super Warm White (2200°K)1x Xicato LED350mA - 4W. Power supply not included. Cutout 3.54” x 21.46”ETL listed.




The Small is guaranteed to entirely blend into the wall, so that only the light beam will be noticed. With the light source at the top and placed at a relatively low level, the Small can be used to illuminate circulation zones.Due to its discrete design, the light fixture can be installed in any interior to create a cozy atmosphere.The Small is available with a specially designed printed circuit board for the new generation of the ‘Rebel’ LED with integrated electronics, for a maximum light output with an optimal heat release. The lenses ensure a perfect light distribution. The use of colored LEDs allows the architect to personalize his project. ETL listed class II. Requires remote 24V DC power supply. After integration of the plaster luminaire, the lamp module can easily be installed.The Small can be directly installed in a brick wall or in gypsum by means of an optional plaster kit.

SMALL


14.1

7”

9.1

7”

5.1

2”

3.39”

4.72”

3.54”


SMALL PLASTERKIT

14.3

3”

4.88”

3.58”

REF. N° : 706 01 000For mounting into gypsum walls Cutout 4.88" x 14.33" Housing : perforated aluminium

SMALL


Warm White (3000°K)Neutral White (4000°K)Royal Blue 3× REBEL LEDREF. N° : 106 20 100 : Warm White (3000°K)REF. N° : 106 20 200 : Neutral White (4000°K)REF. N° : 106 20 300 : Royal Blue24VDC 6W. Power supply not included. Cutout 4.72” x 14.17”ETL listed.




The Normall collection is designed to create indirect ambient lighting. The fixture can be seamlessly installed in walls with a lamp at the top or at the bottom. The Normall series are available with with compact fluorescent lamps and energy-saving Rebel Leds. Requires remote 24V DC power supply. The lenses on the LED ensure a perfect light distribution. The use of colored LEDs allows the architect to personalize his project. It is not just a simple lighting fixture, it becomes a part of the architecture. An optional plaster kit allows installation in gypsum walls. Once the plaster luminaires are painted in the desired colour, the light source can be installed using a simple and ingenious system.

NORMALL

DES

IGN

BY

AR

CH

. S

TEP

HA

NE

BO

ENS


14.1

7”

9.1

7”

4.3

3”

7.48”

8.66”3.54”


NORMALL PLASTERKIT

14.3

3”

8.82”

3.58”

REF. N° : 705 01 000For mounting into gypsum wallsCutout 8.82" x 14.33"Housing : perforated aluminium

NORMALL

REF. N° : 105 01 02626W Double Twin CFL (lamp by others)G24q-3 - 120-277V integral electronic ballast Cutout 8.66” x 14.17”ETL listed.


REF. N° : 105 20 100 : Warm White (3000°K)REF. N° : 105 20 200 : Neutral White (4000°K)REF. N° : 105 20 300 : Royal Blue6× Rebel LEDFor dimmable 0-10V “6x Rebel LED” change catalog numbers from “XXX 20 XXX” to “XXX 60 XXX”.24VDC 12W. Power supply not included. ETL listed.






The Big, with its asymmetric reflector shape, has the same lighting concept as the Normall, but bigger dimensions allow its integration in larger architectural designs. The Big can be directly installed in a brick wall or in gypsumby means of an optional plaster kit.

BIG


15.3

5”

10.3

5”

4.3

3”

8.78”

10.35”3.54”

For direct mounting in solid walls or in gypsum walls by means of an optional plasterkit (Ref. N° 704 01 000).Colour : paintable plaster - lampunit galvanized steel

BIG PLASTERKIT

15.5

1”

10.51”

3.58”


BIG





The XT is designed for compact high power fluorescent lamps 42-57W. This results in large dimensions with an asymmetric reflector shape. The luminaire is driven by its function to create and control maximum output without glare. The XT can be directly installed in a solid wall or in gypsum by means of an optional plaster kit.

XT


27.7

0”

15.9

4”

17.2

8”

11.65”

12.76”

3.54”


(Ref. N° 708 01 000).Colour : paintable plaster - lampunit galvanized steel

XT PLASTERKIT

23.8

6”

3.39”

3.58”


XT

REF. N° : 108 01 04242W Triple Twin CFL (lamp by others)GX24q-4 - 120-277V integral electronic ballast ETL listed. Cutout 12.76” x 27.7”

REF. N° : 108 01 057TC-TEL 57W (lamp by others)GX24q-5 - 120-277V integral electronic ballast Cutout 12.76” x 27.7”ETL listed.


A collection inspired by Moorish architecture. This style is typical of the revival of exotic oriental architecture. The variety of designs with different decorative patterns inspires the lighting designer to integrate this collection into a large range of projects. Seamless integration into the wall remains, of course. the basic idea of ‘Brick in the Wall’. The complete Moor range is also available with a special designed printed circuit board for the new generation of the ‘Rebel’ LED with integrated electronics. The LED version requires remote 24V DC power supply. The lenses ensure an perfect light distribution. The use of colored LEDs allows the architect to personalize his project. The Moor can be directly installed in a solid wall or in gypsum by means of an optional plaster kit.

MOOR


15.5

5” 10.0

4”

4.9

2”

7.48”

8.66”3.54”

19.4

9”

13.9

8”

4.9

2”

7.48”

8.66”3.54”

For direct mounting in solid walls or in gypsum walls by means of an optional plasterkit (Ref. N° 701 01 000).Colour : paintable plaster - lampunit galvanized steelAvailable with 6× Rebel LED’s IP20 & IP54 damp label on request (see Ref.N° page 63)


MOOR 1

MOOR 1 LARGE






15.5

5”

10.0

4”

4.9

2”

7.48”

8.66”3.54”

19.4

9”

13.9

8”

4.9

2”

7.48”

8.66”3.54”


(Ref. N° 701 01 000).Colour : paintable plaster - lampunit galvanized steelAvailable with 6× Rebel LED’s IP20 & IP54 damp label on request (see Ref.N° page 63)


MOOR 2

MOOR 2 LARGE




15.5

5” 10.0

4”

4.9

1”

7.48”

8.66”3.54”

19.4

9”

13.9

8”

4.9

1”

7.48”

8.66”3.54”



MOOR 3

MOOR 3 LARGE





17.3

2” 11.8

1”

4.9

2”

7.48”

8.66”3.54”

21.2

6”

15.7

5”

4.9

2”

7.48”

8.66”3.54”



MOOR 4

MOOR 4 LARGE

REF. N° : 101 04 026 26W Double Twin CFL (lamp by others)G24q-3 - 120-277V integral electronic ballast Cutout 8.66” x 17.32”ETL listed.



17.3

2” 1

1.8

1”

4.9

2”

7.48”

8.66”3.54”

21.2

6”

15.7

5”

4.9

2”

7.48”

8.66”3.54”



MOOR 5

MOOR 5 LARGE

REF. N° : 101 05 026 26W Double Twin CFL (lamp by others)G24q-3 - 120-277V integral electronic ballast ETL listed.




18.7

” 13.1

9”

4.9

2”

7.48”

8.66”3.54”

22.6

4” 17.1

3”

4.9

2”

7.48”

8.66”3.54”



MOOR 6

MOOR 6 LARGE




18.7

” 13.1

9”

4.9

2”

7.48”

8.66”3.54”

22.6

4”

17.1

3”

4.9

2”

7.48”

8.66”3.54”



MOOR 7

MOOR 7 LARGE




18.7

” 13.1

9”

4.9

2”

7.48”

8.66”3.54”

22.6

4”

17.1

3”

4.9

2”

7.48”

8.66”3.54”



MOOR 8

MOOR 8 LARGE




MODEL IP20 IP54 COLOUR

Moor 1 101 21 100 101 21 101 Warm White (3000K)Moor 1 101 21 200 101 21 201 Neutral White (4000K)Moor 1 101 21 300 101 21 301 Royal Blue








Moor 1 Large 102 21 100 102 21 101 Warm White (3000K)Moor 1 Large 102 21 200 102 21 201 Neutral White (4000K)Moor 1 Large 102 21 300 102 21 301 Royal Blue








MOOR RANGE WITH REBEL LEDS

6× Rebel LED24VDC - 12W. Power supply not included. For dimmable 0-10V “6x Rebel LED” change catalog numbers from “XXX 2X XXX” to “XXX 6X XXX”.ETL listed.


15.7

1”

8.82”

3.58”

17.4

8”

8.82”

3.58”

18.8

6”

8.82”

3.58”

MOOR 1/2/3 PLASTERKIT

MOOR 4/5 PLASTERKIT

MOOR 6/7/8 PLASTERKIT

REF. N° : 701 01 000For mounting into gypsum walls of Moor 1, Moor 2 & Moor 3Cutout 8.82" x 15.71"Housing : perforated aluminium

REF. N° : 701 02 000For mounting into gypsum walls of Moor 4 & Moor 5Cutout 8.82" x 17.48"Housing : perforated aluminium

REF. N° : 701 03 000For mounting into gypsum walls of Moor 6, Moor 7 & Moor 8Cutout 8.82" x 18.86"Housing : perforated aluminium


19.6

5”

8.82”

3.58”21.4

2”

8.82”

3.58”

22.8

0”

8.82”

3.58”

MOOR 1/2/3 LARGE PLASTERKIT

MOOR 4/5 LARGE PLASTERKIT

MOOR 6/7/8 LARGE PLASTERKIT

REF. N° : 702 01 000For mounting into gypsum walls of Moor 1 Large , Moor 2 Large & Moor 3 LargeCutout 8.82' x 19.65"Housing : perforated aluminium

REF. N° : 702 02 000For mounting into gypsum walls of Moor 4 Large & Moor 5 LargeCutout 8.82" x 21.42"Housing : perforated aluminium

REF. N° : 702 03 000For mounting into gypsum walls of Moor 6 Large, Moor 7 Large & Moor 8 LargeCutout 8.82" x 22.80"Housing : perforated aluminium



The award “red dot” for high design quality, expressing innovation inform and function in an exemplary manner, is presented to :Die Auszeichnung “reddot” für hohe Designqualität, die in beispielhafterWeise Innovation in Form und Funktion ausdrückt, wird verliehen an :

AtmosWall Luminaires/Wandleuchten

Brick in the Wall NV, Waregem, Belgium/BelgienDesign : Carl Devolder, Roeselare, Belgium/Belgien

Essen, 5 July 2010

Prof. Werner AisslingerBerlin, Germany

Shashi CaanNew York, USA

Jorge PensiBarcelona, Spain

Prof. Dr. Peter ZeeInitiator red dot designEssen, Germany

79 Trenton Avenue Frenchtown, NJ 08825 Tel: (908) 996-7710 Fax: (908) 996-7042 www.designplan.com

Documents

DI Brick in the Wall: Wall Luminaires