Broughton hire guide 2016/17

BROUGHTON PLANT HIRE & SALES HIRE GUIDE 2016/17Specialist suppliers to the heating, ventilation and fire protection trades

e: [email protected]

Southern Depot: 01708 383350 Midlands Depot: 01773 609789 South West Depot: 01275 875587

PLANT HIREBROUGHTON

established 1969

OFFICIAL SERVICE CENTRE FOR

APPROVED TOOLING DISTRIBUTOR FOR

TRAINING We can arrange all your training requirements.

ACCREDITATION

1

Hire rates charged at a minimum of one week, thereafter on a daily basis. All Plant supplied with relevant safety instructions and test certification. Images used through the this hire guide are for illustration purposes only

All hire rates shown in this brochure are exlusive of VAT.

PRESS FITTING04PIPE FITTING16

WELDING25ACCESS EQUIPMENT28

POWERED ACCESS32

DRILLING38

HANDLING & LIFTING34

GRINDING & CUTTING41SITE SERVICES43

ELECTRICAL CABLE CRIMPING & CUTTING46

HEALTH & SAFETY02

CONTENTS

Southern Depot : 01708 383350 Midlands Depot : 01773 609789 South West Depot: 01275 875587

GREEN: NO MORE THAN 8 HOURS CONSTANT USE

AMBER: NO MORE THAN 2 HOURS CONSTANT USE

RED: DOWN TO INDIVIDUAL, USER NEEDS TO DO A RISK ASSESSMENT ON EQUIPMENT BEFORE USE. SHOULD NOT EXCEED 10 - 20 MINS USE

GREEN: BELOW 5m2

AMBER: ABOVE 5m2 BUT BELOW 10m2

RED: ABOVE 10m2

HEALTH & SAFETY INFORMATION

HAND ARM VIBRATION DATABASE

VIBRATION MEASURED IN m2

To help you select the correct Personal Protection please follow the P.P.E. symbol Guide listed below for the relevant Plant items.

Eye Protection Protective footwear

Protective gloves Face Shield

Dust Mask Welding Visor/Welding Goggles

Ear Defenders Respirator, suitable for welding and/or cutting fumes

Full Body Safety Harness Safety Helmetc/w a Lanyard

All the above are available from stock, each complying fully with Health & Safety Regulations. All PPE associated products in this brochure are recommended for use and are available as sales items.Please contact our hire desk for more information.

The hand/harm vibration level information in this brochure, is based on Data supplied by the Relvant manufacturers. Broughton Plant Hire reproduces this data in good faith. For guidance only & not as a substitute for your own risk assessment.

1

1

2

2

3

3

www.broughtonplanthire.co.uk


SALES ITEMS

PLANT HIREBROUGHTON

established 1969

• MACHINE SPARES

• PPE –PROTECTIVE FOOTWEAR, HI VIS CLOTHING, HARD HATS ETC

• WELDING CONSUMABLES

• ABRASIVE DISCS

• HAND AND POWER TOOL CONSUMABLES

• SITE SECURITY E.G. SITE BOXES, FITTING STORES

• POWER AND LIGHTING E.G. SITE LIGHTS, TRANSFORMERS ETC

• ACCESS EQUIPMENT E.G. LADDERS, PODIUM STEPS ETC

Broughton Plant Hire and Sales stock a wide range of consumables, ancillaries and PPE for sale.

Please call us to enquire further about our wide range of goods available for next day delivery.

☎ 01708 383 350

When ordering Presstools please specify what Pressfitting System is being used. As not all Jaws & Collars are compatible. If you are unsure please call for advice on:t: 01708 383350

Preparation of Pipe is important. We can supply Pipe Cutters & Deburrers for hire or sale.

All Novopress Tools are calibrated using a 8790 Pressure Tester and Jaws are inspected with a 31465 Optical Laser Test Rig.

PRESSFITTING

5


MAPRESS COPPER weeklyMAPRESS COPPER KIT 1 15-35mm £40.00

Novopress EFP202 / ECO202 / ECO2 / EFP2 110v PresstoolInclusive: 15-35mm Jaws

MAPRESS COPPER KIT 2 15-35mm £40.00

Novopress ACO202 / ACO203 Battery PresstoolInclusive: 15-35mm Jaws


Novopress ECO301 110v PresstoolInclusive: 15-35mm Jaws


Novopress 42 + 54mm Adaptor Kitto suit above pressing tools


Novopress ECO301 110v PresstoolInclusive: 15-67mm Jaws, Collars and Adaptors


Novopress ECO301 110v PresstoolInclusive: 67-108mm Collars and Adaptors




Novopress ACO202XL / ACO203XL Battery PresstoolInclusive: 67-108mm Collars and Adaptors


Novopress ACO202XL / ACO203XL Battery PresstoolInclusive: 15-108mm Jaws, Collars and Adaptors

MINI COPPER KIT 15-35mm £40.00

Novopress ACO102 Battery PresstoolInclusive: 15-35mm Jaws

5


6

MAPRESS CARBON STEEL/STAINLESS STEEL weeklyMAPRESS STEEL KIT 1 15-35mm £40.00

Novopress EFP202 / ECO202 / ECO2 / EFP2 110v PresstoolInclusive: 15-35mm Jaws

MAPRESS STEEL KIT 2 15-35mm £40.00















Novopress ACO202XL / ACO203XL Battery PresstoolInclusive: 15-108mm Jaws, Collars and Adaptors (not suitable for 66.7mm Gerberit Mapress carbon steel)**

MINI STEEL KIT 15-35mm £40.00


**For 66.7mm Geberit Mapress Carbon Steel please use Novopress ECO301 Press Tool


SPRINKLER SYSTEM weeklyMAPRESS SPRINKLER KIT 1 15-28mm £40.00


MAPRESS SPRINKLER KIT 2 35mm £29.50

Novopress 35mm HP Collar and Adaptor To suit above pressing tool

MAPRESS SPRINKLER KIT 3 42-54mm £17.50

Novopress 42-54mm Collars and Adaptor To suit above pressing tool

MAPRESS SPRINKLER KIT 4 76.1mm £19.50

Novopress 76.1mm Collar and Adaptor To suit above pressing tool

MAPRESS SPRINKLER KIT 5 88.9mm £19.50

Novopress 88.9mm Collar and AdaptorTo suit above pressing tool

MAPRESS SPRINKLER KIT 6 76-108mm £110.00

HCPS Supersize PresstoolInclusive: 76-108mm Collars and Adaptors

MEPLA weeklyMEPLA KIT1 16-32mm £40.00

Novopress ACO202 / ACO102 / ACO203 Battery PresstoolInclusive: 16-32mm Jaws, Deburrer and Cutter

MEPLA KIT 2 16-50mm £57.50

Novopress ACO202 / ACO102 / ACO203 Battery PresstoolInclusive: 16-50mm Jaws, Deburrer and Cutter

MEPLA KIT 3 63mm Jaw Kit £17.50

63mm Jaw Kit, Cutter and Deburrer

MEPLA KIT 4 75mm Jaw Kit £17.50

75mm Jaw Kit, Cutter and Deburrer

7


8

COPPER weeklyYORKSHIRE COPPER KIT 1 15-35mm £40.00

Novopress ECO2 / ECO202 / EFP2 / EFP202 110v PresstoolInclusive: 15-35mm Jaws

YORKSHIRE COPPER KIT 2 15-35mm £40.00





Novopress 42 + 54mm Adaptor Kit to suit above pressing tools




Novopress ECO301 110v PresstoolInclusive 67-108mm Collars and Adaptors






Novopress ACO202XL / ACO203XL Battery PresstoolInclusive: 15-108mm Jaws, Collars, Adaptors




CARBON STEEL/STAINLESS STEEL weeklyYORKSHIRE STEEL KIT 1 15-35mm £40.00


YORKSHIRE STEEL KIT 2 15-35mm £40.00









Novopress ECO301 110v PresstoolInclusive 67-108mm Collars and Adaptors









MULTI LAYER HENCO PVDF/BRASS weeklyBATTERY / 110v PRESSTOOL 16-32mm £40.00

BATTERY / 110v PRESSTOOL 16-50mm £57.50


9


10

COPPER weeklySANHA COPPER KIT 1 15-35mm £40.00


SANHA COPPER KIT 2 15-35mm £40.00















Novopress ACO202XL / ACO203XL Battery PresstoolInclusive: 15-108mm Jaws, Collars, Adaptors




CARBON/STAINLESS/BRONZE weeklySANHA STEEL KIT 1 15-35mm £40.00


SANHA STEEL KIT 2 15-35mm £40.00











Novopress ECO301 110v Presstool Inclusive: 15-108mm Jaws, Collars and Adaptors







MULTI LAYER weeklyBATTERY / 110v PRESSTOOL 16-32mm £40.00



11


12

COPPER/CARBON/STAINLESS weeklyVIEGA KIT 1 15-35mm £40.00Viega Battery PressgunInclusive: 15-35mm Press Jaws

VIEGA KIT 2 15-54mm £57.50Viega Battery PressgunInclusive: 15-54mm Press Jaws

VIEGA KIT 3 15-67mm £75.00Viega Battery PressgunInclusive: 15-67mm Press Jaws, Press Rings and Adaptors

VIEGA KIT 4 67-108mm £95.00Viega Battery PressgunInclusive: 67-108mm Press Rings and Adaptors

VIEGA KIT 5 15-108mm £110.00Viega Battery PressgunInclusive: 15-108mm Press Jaws, Press Rings and Adaptors (excluding 64mm Press RIng)

VIEGA PRESS RING 64mm £9.0064mm Press Ring

VIEGA MINI KIT 15-35mm £40.00Viega Battery Pressgun PiccoInclusive: 15-35mm Press Jaws

VIEGA HINGED RING SET FOR MINI KIT 15-35mm £26.50Inclusive: 15-35mm Press Ring Set for Hinged Press Jaws

MEGA PRESS weeklyMEGA PRESS KIT 1/2"-2" £75.00Viega Battery PressgunInclusive: 1/2"-2" Press Collars

13


CARBON/STAINLESS/COPPER/GAS weeklyB PRESS KIT 1 15-35mm £40.00Rems Power Press 110vInclusive: 15-35mm Jaws

B PRESS KIT 2 15-35mm £40.00Rems AKKU Press BatteryInclusive: 15-35mm Jaws

B PRESS KIT 3 42mm £8.7542mm Rems Jaw

B PRESS KIT 4 54mm £8.7554mm Rems Jaw

B PRESS KIT 5 67mm £75.00Novopress ECO301 110v PresstoolInclusive: Adaptor & 67mm Collar

B PRESS KIT 6 MINI KIT 15-28mm £40.00Rems Battery MinipressInclusive: 15-28mm Jaws

B PRESS KIT 7 67-108mm £95.00Novopress ECO301 110v PresstoolInclusive: 67-108mm Collars and Adaptors

MULTILAYER COMPOSITE PIPE (U PROFILE) weeklyWAVIN KIT 1 16-40mm £40.00Novopress ACO102 Presstool Inclusive 16-40mm Jaws

WAVIN KIT 2 16-50mm £57.50Novopress ACO202/3 Presstool Inclusive 16-50mm Jaws

WAVIN KIT 3 63mm £17.5063mm Jaw

WAVIN KIT 4 75mm £22.0075mm Collar and adaptor

MLCP PIPE CUTTER 16-75mm £8.50

A full range of Calibration Kits/ Mandrels available POA


14

POLYPRESS weeklyREMS AKKU PRESSTOOL 16-32mm £40.00

REMS AKKU PRESSTOOL 16-50mm £57.50

PRESS COLLAR KIT 63mm £17.50

PRESS COLLAR KIT 75mm £17.50

POLYSURE weeklyREMS AKKU PRESSTOOL 15-22mm £40.00

RAUTOOLS weekly

A2/A3 BATTERY – HYDRAULIC POWERED COMPRESSION SLEEVE TOOL 16 – 40mm £52.00

H/G1 HYDRAULIC POWERED COMPRESSION SLEEVE TOOL 40 – 110mm £110.00

weekly

KLAUKE BATTERY PRESSTOOL 16-32mm £57.50KLAUKE BATTERY PRESSTOOL 16-50mm £57.50PRESS COLLAR KIT 63mm £17.50PRESS COLLAR KIT 75mm £17.50PRESS COLLAR KIT 90mm £22.00PRESS COLLAR KIT 110mm £22.00CUTTER & BENDING TOOL SET 16-110mm £22.00PIPE BENDING TOOL 110v 16-32mm £42.00

PEX AL PEX (Series F5 ‘U’ Profile / Series F9 ‘TH’ Profile) weekly

REMS AKKU PRESSTOOL 16-32mm £40.00REMS AKKU PRESSTOOL 16-50mm £57.50PRESS COLLAR KIT 63mm £17.50PRESS COLLAR KIT 75mm £17.50


PRESS SYSTEM ACCESSORIES (CARBON/STAINLESS) weeklyMANUAL PIPE BENDER 15-28mm £25.00REMS CURVO 110v ELECTRIC BENDER 15-35mm £50.00TUBELA ROTARY SCISSOR BENDER 15-54mm (CARBON STEEL) £115.00MANUAL PIPE CUTTER 15-54mm £8.50MANUAL PIPE CUTTER 76-108mm £12.50AXXAIR BENCH MOUNTED PIPE CUTTER 110v UP TO 108mm £85.00REMS CENTO PIPE CUTTER 110v 22-108mm (CARBON, STAINLESS OR COPPER CUTTING WHEELS AVAILABLE)

£48.00

COPPER weeklyMANUAL PIPE CUTTER 15-108mm £12.50

REMS CENTO 110v PIPE CUTTER 22-108mm £48.00

REMS CURVO 110v ELECTRIC BENDER 15-35mm £50.00

RATCHET COPPER BENDER 15-54mm £95.00

MULTILAYER weeklyREMS SWING BENDING TOOL 14-32mm £22.00

REMS CURVO 50 BENDING TOOL 32-50mm £50.00

REMS PYTHON BENDING TOOL 40-63mm £55.00

MANUAL PIPE CUTTER 16-75mm £8.50

15

16

www.broughtonplanthire.co.ukfor more information visit www.broughtonplanthire.co.uk telephone: 01708 383350

16

www.broughtonplanthire.co.ukfor more information visit www.broughtonplanthire.co.ukwww.broughtonplanthire.co.ukwww.broughtonplanthire.co.ukwww.broughtonplanthire.co.uk telephone: 01708 383350

1616PIPE FITTINGEQUIPMENT

17


PIPE THREADING MACHINES weeklyRIDGID 300C THREADING MACHINE 1⁄2"-2" BSP C/W PIPE SUPPORT £40.00

RIDGID 1233 THREADING MACHINE 1⁄2"-3" BSP C/W PIPE SUPPORT £62.00

RIDGID 1233 THREADING MACHINE 1⁄2"-2" BSPC/W 2 DIE HEADS & PIPE SUPPORT

£52.50

ADDITIONAL DIE HEAD RIDGID £6.00

REX THREADING MACHINE 1⁄2"-4" BSP C/W PIPE SUPPORT £95.00

RIDGID 1233C THREADING MACHINE 1⁄2"-3" NPT C/W PIPE SUPPORT £95.00

REX THREADING MACHINE 1⁄2"-4" NPT C/W PIPE SUPPORT £105.00

MACHINE GUARDS £6.00

46 PIPE SUPPORT £8.00

965/RJ98 PIPE SUPPORT/PIPE ROLLER 4"-12" £8.00

DRIP TRAY (FOR USE UNDER MACHINES TO PROTECT FLOORS ETC) £5.00

NIPPLE CHUCK £12.50

141 RECEDER 21⁄2"-4" £30.00

161 RECEDER 4"-6" £40.00

HAND HELD THREADING MACHINES weeklyRIDGID 690 1⁄2"-2" 110v £32.00

REMS AMIGO 2 1⁄2"-2" 110v £32.00

REMS AMIGO 16-32mm CONDUIT £32.00

R200 RATCHET HAND DIES UPTO 2" £20.00

PIPE STILSONS & CHAIN WRENCHES weekly14"/24" £6.00

36" £7.00

48" £8.50

17

18


ROLL GROOVING EQUIPMENT weeklyRIDGID 918 HYDRAULIC GROOVER SUPPLIED 2"-6" £40.00

RIDGID 918 HYDRAULIC GROOVER SUPPLIED 8"-12" £40.00

RIDGID 918 STABILIZER KIT £11.50

RIDGID 916 PORTABLE ROLL GROOVER 11⁄4"-6" £30.00

RIDGID 916 PORTABLE ROLL GROOVER 1" ONLY £40.00

RIDGID 916 PORTABLE ROLL GROOVER 2"- 6" COPPER £40.00

RIDGID 915/914 PORTABLE ROLL GROOVER 2"- 6" £40.00

RIDGID 975 COMBO INSITU ROLL GROOVER 11⁄4" – 6" £40.00

RIDGID 915 INSITU PORTABLE ROLL GROOVER ROLLERS 11⁄4"- 11⁄2" £40.00

RIDGID 918 GROOVER, POWER DRIVE & PIPE SUPPORT £62.00

RIDGID HC450 HOLE CUTTER FOR MECHANICAL TEES £62.00

ROLL GROOVING EQUIPMENT weeklyVICTAULIC 272SFS ROLL GROOVING M/C 2"-8"* £88.00

ABOVE SUPPLIED WITH 300C POWER DRIVE AND TRISTAND £110.00

VICTAULIC VE416 FSD 2"-12" OGS PIPE £265.00

VICTAULIC VE416 FSD 14"-16" AGS PIPE £265.00

RX ROLLER SET S/STEEL SCH 10 AND BELOW 3⁄4"- 12" £38.00

RX ROLLER SET CARBON SCH 10 AND BELOW 3⁄4"- 12" £38.00

COPPER ROLLER SET FOR BRITISH STANDARD COPPER 2"-8" £38.00

AGS ROLLER SET 14"-16" FOR USE ON VE416 FSD £88.00

*VE272SFS permitted for roll grooving thin wall carbon steel pipe 2"-12"

19


PRESSURE/PIPE TESTING (*Calibrated gauges available as sale items) weekly

3.5 CFM COMPRESSOR 115 psi C/W HOSE & 1⁄2" BSP BUSH £27.50

7.5 CFM COMPRESSOR 115 psi C/W HOSE & 1⁄2" BSP BUSH £35.00

8 CFM COMPRESSOR 130 psi C/W HOSE & 1⁄2" BSP BUSH £38.00

ELECTRIC WATER TEST PUMP MAX. 50 BAR £40.00

PETROL WATER TEST PUMP MAX. 50 BAR £50.00

RIDGID HAND TEST BUCKET MAX. 60 BAR £18.50

REMS MULTI-PUSH FLUSHING AND PRESSURE TESTER £85.00

GAS PURGING weeklyNITROGEN REGULATOR HOSE & 1⁄2" BSP CONNECTION £16.00

NITROGEN CYLINDER 30 LITRE £6.50

DRAIN TESTING weeklyDRAIN BUNGS 1"-6" £2.00

RUBBER DRAIN TEST BAGS 2"-6" £4.00

TEST KIT SALE ITEM ONLY POA

20


POWERED PIPE CUTTERS weeklyRIDGID 590L 14" DRY CUT SAW £40.00

RIDGID 550 RECIPROCATING SAW 1⁄2"-6" £30.00

FEIN RECIPROCATING PIPE SAW 100-325MM COMPLETE WITH CLAMP £75.00

RIDGID 258 HYDRAULIC/POWERED PIPE CUTTER 21⁄2"-8" £58.00

RIDGID 258XL HYDRAULIC/POWERED PIPE CUTTER 8"-12" £58.00

REMS DUE CENTO 2"-8" £58.00

MANUAL PIPE CUTTERS weeklyRIDGID 2A PIPE ROLLER CUTTER 1⁄2"-2" £6.50

RIDGID 4S PIPE ROLLER CUTTER 2 1⁄2"-4" £12.50

RIDGID 6S PIPE ROLLER CUTTER 4"-6" £15.00

RIDGID 466 HINGED FOUR WHEEL CUTTERS 4"-6" £40.00

RIDGID 468 HINGED FOUR WHEEL CUTTERS 6"-8" £45.00

RIDGID 472 (868) HINGED FOUR WHEEL CUTTERS 8"-12" £48.00

RIDGID 154 4" COPPER CUTTERS £9.50

RIDGID 156 6" COPPER CUTTERS £15.50

RIDGID STUD CUTTER 8mm £12.00

RIDGID STUD CUTTER 10mm £12.00

ORBITAL CUTTERS weeklySCORP CUTTER 1"-8" 110v SQUARE CUT £62.50

SCORP CUTTER 8"-14" 110v SQUARE CUT £85.00

GF CUT AND BEVEL MACHINE RA4 1⁄2"-4" C/W BENCH £90.00

GF CUT AND BEVEL MACHINE RA6 2"-6" C/W BENCH £120.00

AXXAIR CUTTER 4" C/W BENCH 1⁄4”-4 1⁄2” £90.00

AXXAIR CUTTER 6" C/W BENCH 1⁄4”-6” £120.00

AXXAIR CUTTER 8" C/W BENCH 2”-8” £150.00

21


PIPE BENDING weeklyHYDRAULIC 1⁄2"-2" £48.00

HYDRAULIC 1⁄2"-3" £60.00

RIDGID 3813C 1⁄2"- 3" ELECTRIC 110v BENDER £105.00

TUBELA ROTARY SCISSOR BENDER 15-54mm CARBON STEEL / COPPER £115.00

TUBELA 15-54mm RATCHET ASSISTED COPPER BENDER £85.00

HILMOR 15-35mm STAND BENDER £28.00

HILMOR 15-42mm STAND BENDER £32.00

HILMOR 16-25mm CONDUIT BENDER £18.00

HILMOR 15-22mm SCISSOR BENDER £10.00

REMS CURVO 15-28mm 110v BENDER £50.00

REMS CURVO 50 110v 14-50mm / MULTI-LAYER COMPOSITE PIPE £50.00

REMS PYTHON HYDRAULIC 40-63mm / MULTI-LAYER COMPOSITE PIPE £58.00

PIPE FREEZERS weeklyFREEZE MASTER ELECTRIC 110v 15mm-42mm £48.00

FREEZE MASTER ELECTRIC 110v 15mm-60mm £64.00

EXPANSION KIT 65mm-88mm £16.00

REMS ESKIMO CO2 KIT 1⁄8"-2" 10-60mm £42.00

CO2 GAS POA

BENCHES/VICES weeklyRIDGID 1400 WORK BENCH C/W CHAIN VICE (4" OR 6") & ENGINEERS VICE £12.50

RIDGID 560 HORSE BENCH 5" CAPACITY £7.50

RIDGID 450 TRIPOD VICE 5" CAPACITY £9.00

RIDGID 460 TRIPOD VICE 6" CAPACITY £9.00

WELDING CLAMPS/VICES £12.00

ROLLING WORK BENCH C/W CHAIN VICE & ENG VICE £27.50

PIPE BENDING"-2"

21

22


COPPER TOOLS weeklyT60 110v T DRILL 15-54mm £110.00

MANUAL T DRILL FOR COPPER 15-42mm £40.00

CAST IRON TOOLS weeklyRECORD 45 CUTTER UP TO 6" £34.00

RECORD 45 CUTTER UP TO 12" £38.00

246 SNAP CUTTER UP TO 6" £36.00

4" PULLING TOOL £30.00



RIDGID 228 PIPE ASSEMBLY TOOL 2"-8" £38.00

22

23


HDPE JOINTING weeklyBUTT WELDING MACHINE 40-200mm £135.00

BUTT WELDING MACHINE 40-315mm £255.00

BUTT WELDING HAND HELD MACHINE (HOT PLATE) 40-75mm £40.00

ELECTROFUSION BOX 110v 40-160mm £60.00


FUZE HDPE weeklyREMS BUTT WELDING MACHINE 40-160mm £135.00

REMS BUTT WELDING MACHINE 90-315mm £255.00

BUTT WELDING HAND HELD MACHINE (Hot Plate) 40-75mm £40.00


PE80 FUSION WELDER 40v 16-800mm £68.00

HPPE (PE100) MDPE FUSION WELDER 40v 32-315mm £60.00

HPPE (PE100) MDPE FUSION WELDER 80v 315-800mm £75.00

SOCKET FUSION weeklyBENCH MACHINE PACK 50-125mm £155.00

Also includes 1400w Hand-held machine

1400w HAND-HELD MACHINE 40-125mm £55.00

800w HAND-HELD MACHINE 20-63mm £40.00

JIG KIT FOR INSITU SOCKET FUSION 20-125mm £125.00

AQUATHERM ELECTROFUSION MACHINE 20-160mm £68.00

AQUATHERM ELECTROFUSION MACHINE 20-250mm £85.00

* Generators for fusion machines available on Page 44

23

24


ELECTROFUSION (Now available as data logging) weekly

MDPE FUSION WELDER 40v £60.00

MDPE FUSION WELDER 80v £75.00

HPPE (PE100) FUSION WELDER 40v 32-315mm £60.00

HPPE (PE100) FUSION WELDER 80v 315-800mm £75.00

BARCODE READER FOR USE WITH MDPE MACHINE £25.00

HDPE FUSION WELDER AW315 110v40-315mm (SUITABLE FOR GEBERIT, TERRAIN, AKATHERM)

£68.00

ENFUSION VULCATHENE (FOR CHEMICAL WASTE) UPTO 6" £68.00

GF PIPING SYSTEMS INSTAFLEX HWSG3 16-225mm £85.00

ACCESSORIES weeklyTOP LOADING CLAMP £12.00

FUSION CLAMP TEE £25.00

SQUEEZE OFF TOOL MANUAL 20-63mm £14.00

SQUEEZE OFF TOOL HYDRAULIC 63-180mm £40.00

RITMO PS180 PEELING TOOL 63-180mm £47.50

RITMO PS400 PEELING TOOL 110-400mm £47.50

FRIATEC PEELING TOOL 90-400mm £47.50

UNIPREP 1 ROTARY SCRAPPING TOOL 110-400mm £47.50

UNIPREP 2 ROTARY SCRAPPING TOOL 125-500mm £65.00

PROTECTA-LINE STRIPPING TOOL 90-110mm £47.50

PROTECTA-LINE STRIPPING TOOL 125-180mm £47.50

TIN-12 GENERATOR TO SUIT FUSION MACHINE £60.00

25


WELDING

26


WELDERS(All sets supplied with 2 x 15m Welding Leads. 415 Welders supplied with 415v 32amp 5 Pin Plugs) weekly

150amp D.C. INVERTER DUAL VOLTAGE 110v 32amp OR 240v 16amp £45.00200amp MULTI VOLTAGE (110v/240v/415v) MILLER DC INVERTER £65.00250amp D.C. INVERTER 240v/415v 32amp £65.00270amp D.C. INVERTER 415v 32amp £65.00400amp D.C. INVERTER 415v 32amp £65.00INVERTER REMOTE CONTROL £12.00415v TIG SET £90.00110v/240v TIG SET £65.00

WELDER GENERATORS(All sets supplied with 2 x 15m Welding Leads) weekly

PETROL MOSA DC 150amp Hand Carry £70.00PETROL MOSA DC 200amp £82.00DIESEL MOSA DC 200amp £85.00DIESEL MOSA DC 250amp £95.00DIESEL MOSA DC 300amp £105.00DIESEL MOSA DC 350amp £115.00REMOTE CONTROL £12.00

WELDER ACCESSORIES weekly15m WELDING LEADS £5.50415v 5-PIN EXT LEADS £12.00WELDING SCREEN 2m X 2m £8.00ELEPHANT TENT WELDING SHELTER £26.00PIPE ROLLER STANDS UP TO 10" £8.00ADJUSTABLE PIPE STAND UP TO 16" £36.00FUME EXTRACTOR C/W 5M FLEXI DUCT £32.00FUME ELIMINATOR FILTRATION EXTRACT £42.00LINCOLN MOBIFLEX FILTRATION FUME EXTRACTOR / 735 CFM AIRFLOW £80.00FIRE EXTINGUISHERS, CO2 WATER, DRY POWDER £7.50ROD QUIVER £8.00WELDING CLAMP £8.00BARREL PUMP £3.00JERRY CAN £2.50205L DIESEL DRUM POABARREL BUND £12.00

27


PROPANE EQUIPMENT weeklyPROPANE TORCH KIT & CYLINDER £8.00

PROPANE TORCH £5.50

LEAD MELTING POT LADLE & FURNACE £36.00

OXY/PROPANE CUTTING & HEATING KIT £36.00

OXY/ACETYLENE EQUIPMENT weeklyLEAD BURNING KIT £33.00

CUT & WELD KIT £33.00

OXY/PROPANE CUTTING & HEATING KIT £36.00

PORTA PACK CYLINDER TROLLEY CYLINDER SIZE X + M £5.50

MID SIZE CYLINDER TROLLEY CYLINDER SIZE Y + J £5.50

FULL SIZE CYLINDER TROLLEY CYLINDER SIZE W + F £5.50

CYLINDER HIRE weeklyOXYGEN 10ltr £6.50

OXYGEN 30ltr £6.50

ACETYLENE 10ltr £6.50

ACETYLENE 30ltr £6.50

ARGON 30ltr £6.50

NITROGEN 30ltr £6.50

CO2 VAPOUR 10ltr £4.50

CO2 LIQUID FREEZE 10ltr £4.50

PROPANE 3.9kg £4.50

PROPANE 18kg £6.50

27

*All Gas contents for the above cylinders POA

28

www.broughtonplanthire.co.ukwww.broughtonplanthire.co.uk

28 ACCESSEQUIPMENT

29


MOBILE TOWERS (All available with 500mm & 250mm Rung Centres in 3T and AGR)(All available in the following base sizes: 1450x2.5m 1450x1.8m 850x2.5m 850x1.8m) weeklyPLATFORM HEIGHT 1.7m WORKING HEIGHT 3.7m OVERALL HEIGHT 2.530m £25.00

PLATFORM HEIGHT 2.2m WORKING HEIGHT 4.2m OVERALL HEIGHT 3.030m £25.00



















CANTILEVER TOWERS weeklyVARIOUS SIZES AVAILABLE POA

STAIRDECK-STAIRWAY TOWER (Base Size 700x1500mm) weeklyPLATFORM HEIGHT 2.8m £65.00

PLATFORM HEIGHT 4.3m £85.00

29

30


DEALING DESK TOWERS (Allows Access over desks, Machinery etc.) weekly2.2m PLATFORM HEIGHT 850mm WIDE X 3.6m LONG £52.00

2.2m PLATFORM HEIGHT 850mm WIDE X 2.5m LONG £45.00

2.2m PLATFORM HEIGHT 850mm WIDE X 1.8m LONG £45.00

MONKEY TOWER MINI (Desk surfer) weeklyWORKING HEIGHT UPTO 3.9m £90.00

FOLDEASY TOWER weekly0.8m X 1.8m PLATFORM HEIGHT 1.5m £25.00

0.8m X 1.8m PLATFORM HEIGHT 2.2m £25.00

BUILDERS STEPS weeklyClass 1 aluminium 8 tread OPEN HEIGHT 1.95m £6.50

Class 1 aluminium 10 tread OPEN HEIGHT 2.44m £8.00

Class 1 aluminium 12 tread OPEN HEIGHT 2.93m £10.00

Class 1 fibreglass 6 tread OPEN HEIGHT 1.65m £11.50



PODIUM STEPS (Standard or PAS 250 complient) weeklyPD500 PLATFORM HEIGHT 0.5m £16.00

PD5 PLATFORM HEIGHT 0.9m £16.00

PD PLATFORM HEIGHT 1.165m £18.00



SHERPASCOPIC HEIGHT ADJUSTABLE PLATFORM STEPS weekly4-6 Tread 1.06-1.52m PLATFORM ADJUSTABLE £20.00

7-9 Tread 1.77-2.23m PLATFORM ADJUSTABLE £24.00

6 Tread 1.52m PLATFORM FIXED £20.00

30

31


PLATFORM STEPS (Complete with two handrails) weekly5 Tread 1.3m PLATFORM £10.00

6 Tread 1.56m PLATFORM £12.00



COMBINATION LADDER (Use as extended steps or extension ladder) weekly2.1m CLOSED HEIGHT Extended Steps max 3.5m £16.00

2.7m CLOSED HEIGHT Extended Steps max 4.2m £18.00

3m CLOSED HEIGHT Extended Steps max 4.8m £19.50

3.5m CLOSED HEIGHT Extended Steps max 5.6m £21.00

EXTENSION LADDERS weekly2.3m Double EXTENDED HEIGHT 4m £14.00

2.3m Treble EXTENDED HEIGHT 5.8m £16.00

3m Double EXTENDED HEIGHT 5.4m £14.00

3m Treble EXTENDED HEIGHT 7.3m £20.00

3.5m Double EXTENDED HEIGHT 6.2m £16.00

3.5m Treble EXTENDED HEIGHT 8.5m £26.00

4m Treble EXTENDED HEIGHT 10.3m £34.00

ROOF LADDER £12.00

LIGHTWEIGHT STAGING “YOUNGMAN BOARD" weekly10’ 3m £6.00

12’ 3m £7.00

14’ 4.5m £8.00

16’ 5m £10.00

18’ 5.4m £13.00

20’ 6.3m £15.00

Guard Rail System per 3m £10.00

32


POWEREDACCESS

33


PUSH AROUND VERTICAL (PAV) weeklyMODEL MAX PLATFORM MAX WORKING WEIGHT KGPop Up 1.63m 3.63m 280 £70.00

Pop Up Push 8 Pro 2.5m 4.5m 370 £95.00

Youngman X3 2.5m 4.5m 349 £95.00

Youngman X3X 3.2m 5,2m 390 £110.00

Power Tower Nano 2.5m 4.5m 285 £95.00

Power Tower Power Tower 3.1m 5.1m 342 £110.00

Genie AWP 25 7.56m 9.56m 263 £165.00

Peco lift 1.5m 3.5m 180 £75.00

Eco lift 2.2m 4.2m 305 £95.00

SELF PROPELLED weeklyMODEL MAX PLATFORM MAX WORKING WEIGHT KGPower Tower Nano SP 2.5m 4.5m 478 £210.00

Genie GS1932 5.79m 7.79m 1,498 £165.00

Snorkel S1930 5.6m 7.6m 1,650 £165.00

Genie GS2032 6.10m 7.90m 1,825 £190.00

Genie GS2632 7.92m 9.92m 2,002 £295.00

Genie GS2646 7.92m 9.92m 2,447 £325.00

Genie GR15 4.47m 6.47m 994 £165.00

Genie GR20 6.02m 8.02m 1,112 £210.00

ACCESSORIES weeklyFULL BODY C/W RESTRAINT LANYARD £15.00

POWER TOWER PIPE CARRIER £12.50

GENIE 1932, 2632, 2646 PIPE CARRIER £24.00

33

34


HANDLING& LIFTING

35


GENIE LIFTS weeklyGL10 3.56m MAX LIFT SWL 159kg £80.00SUMNER CONTRACTOR LIFT 24/12 - 3.7m MAX LIFT SWL 180kg £80.00SL10 3m MAX LIFT SWL 450kg £85.00SL12 3m MAX LIFT SWL 295kg £85.00SL15 5m MAX LIFT SWL 360kg £95.00SL18 5.4m MAX LIFT SWL 295kg £95.00SL20 6m MAX LIFT SWL 363kg £115.00SL24 7.3m MAX LIFT SWL 290kg £125.00SL25 7.9m MAX LIFT SWL 295kg £125.00GENIE FORK EXTENSIONS PER PAIR (N.B. Will decrease load capacity) £12.00PIPE CRADLES PER PAIR £12.00

PORTABLE TELESCOPIC GAS HOIST weeklyGH38 3.8m MAX LIFT SWL 136Kg £105.00GH56 5.6m MAX LIFT SWL 113Kg £125.00CO2 10ltr vapour cylinder £4.50Contents for 10ltr CO2 vapour cylinder POA

ROUST-A-BOUT weeklyR150 4.6m MAX LIFT SWL 680kg £105.00R250 7.6m MAX LIFT SWL 680kg £175.00EXTENSION TEE & HEAD £32.00

SHEER LEGS (Extendable) weeklySWL 1 Ton £115.00

MAN RIDING TRIPOD Portable Retrival System for Personnel Working below ground weeklyTRIPOD C/W WINCH & HARNESS £175.00MAN SAFE SAFETY HARNESS RESTRAINT FOR ROOF £195.00

35

36


CHAIN BLOCKS weekly1⁄2 TON UP TO 6m LIFT £30.001⁄2 TON UP TO 30m LIFT £45.00

1 TON UP TO 6m LIFT £30.00

1 TON UP TO 30m LIFT £45.00

2 TON UP TO 10m LIFT £45.003⁄4 / 11⁄2 TON PULL LIFT/LEVER HOIST £25.001⁄2 / 1 TON ELECTRIC HOIST UP TO 30m LIFT 110v 32amp £95.001⁄2 / 1 TON ELECTRIC HOIST UP TO 50m LIFT 110v 32amp £120.00

2 TON ELECTRIC HOIST UP TO 30m LIFT 110v 32amp £125.00

PORTABLE HANDLING weeklyPALLET TRUCKS 2 TON STANDARD £28.50

PALLET TRUCK EXTENDED FORK 2 TON £48.00

PALLET TRUCK HIGH LIFT 1 TON £64.00

FLOOR CRANE 1000 KILO £54.00

COUNTER BALANCE FLOOR CRANE 500kg £105.00

NYLON MACHINE SKATES (PER 3) £54.00

PIPE BOGEY £12.50

CRICKET PIPE BOGEY £16.50

FLAT BED TROLLEY (VARIOUS SIZES AVAILABLE) £22.00

SACK BARROW £8.50

SKOOT HYDRAULIC SACK BARROW 2 TON (PAIR G STRAP) £120.00

STAIR CLIMBING SACK BARROW £12.50

BATTERY POWERED STAIR CLIMBER 330kg £135.00



MANHOLE LIFT CRADLE £95.00

SMALL PLASTERBOARD TROLLEY £16.50

LARGE PLASTERBOARD TROLLEY £22.50

DRY WALL PANEL LIFTER £45.00

CHAIN BLOCKS

37


WINCH weeklyTIRFOR WINCH C/W 30m WIRE ROPE (800kg OR 1600kg) £40.00

MINIFOR 110v C/W 50m WIRE ROPE (300kg SWL) TR30 (WT 21KG) £145.00

MINIFOR 110v C/W 50M WIRE ROPE (500kg SWL) TR50 (WT 32kg) £165.00

HANDLING & LIFTING ACCESSORIES weeklyFLAT / WEBBED SLINGS (ALL SIZES) £6.00

GIRDER TROLLEY / CLAMP (ADJUSTABLE) £12.00

D SHACKLES £3.50

ROLLING CROW BAR £12.00

RATCHET CABLE JACKS 16TON £105.00

CABLE JACKS 3 TON/ 6 TON £52.00

CABLE ROLLERS £6.00

NYLON MACHINE SKATES (PER 3) £54.00

HYDRAULIC JACKS (5 TON) £32.00

HYDRAULIC JACKS (10 TON) £49.00

SAFETY HARNESS FULL BODY (VARIOUS LANYARD OPTIONS AVAILABLE) £15.00

INERTIA REEL UP TO 10m £35.00

INERTIA REEL UP TO 20m £40.00

ROOF MAN ANCHOR £85.00

A FRAME GANTRY (6’6" to 10’ Adjustable underside of Beam) weeklyA. FRAME (1 & 2 TON CAPACITY) 1.5m BEAM £95.00

A. FRAME (1 & 2 TON CAPACITY) 2.0m BEAM £110.00

A.FRAME (1 & 2 TON CAPACITY) 3.0m BEAM £125.00

A. FRAME (1 & 2 TON CAPACITY) 4.0m BEAM £140.00

37

38


DRILLING

39


HAMMER DRILLS 110v weeklyGBH 2 SDS HAMMER DRILL 20mm CONCRETE 16 m/s2 £14.00

GBH 3 SDS HAMMER DRILL 28mm CONCRETE 13m/s2 £18.00

GBH 4 SDS HAMMER DRILL 32mm CONCRETE 12m/s2 £24.00

GBH 5 SDS MAX COMBI HAMMER 40mm CONCRETE 12.8 m/s2

ROTARY DRILLS weekly13mm PERCUSSION DRILL 15 m/s2 £14.00

10mm CHUCK ANGLE DRILL £16.00

13mm CHUCK ANGLE DRILL £18.00

ROTARY DRILL AND PEDESTAL STAND £32.00

ROTOBROACH weeklyPUMA 30mm DIA 25MM DEPTH £50.00

PANTHER 40mm DIA 50mm DEPTH £60.00

COBRA 65mm DIA 50mm DEPTH £70.00

HILTI RANGE weeklyTE2 110v ROTARY HAMMER DRILL SDS 12mm Concrete 16 m/s2 £16.00

TE7 110v ROTARY HAMMER DRILL SDS max 12mm Concrete 11ms2 £20.00

TE4A CORDLESS ROTARY HAMMER DRILL SDS 22v 12mm Concrete 11m/s2 £28.00

TE6A CORDLESS ROTARY HAMMER DRILL SDS 36v 16mm Concrete 11m/s2 £30.00SFH22A CORDLESS HAMMER DRILL DRIVER 22v 14mm Concrete NB only gives steel HAV rating at 2.5m/s2

£20.00

TE60ATC 110v BREAKER SDS 40mm Concrete 11 m/s2 £65.00

SIW14 IMPACT WRENCH CORDLESS 18v Up to 10mm max £28.00SIW22A IMPACT WRENCH CORDLESS 22v Up to 10mm max £28.00SID14 IMPACT DRIVER CORDLESS 18v Up to 10mm max £18.00SID22A IMPACT DRIVER CORDLESS 22v Up to 10mm max £20.00TEDRS6 DUST REMOVAL SYSTEM TO SUIT TE7 AND TE6A £12.50

39

40


DRY DIAMOND CORE DRILLING weeklyVAR. SPEED DRILL 8406 13mm CHUCK £24.00

CONCRETE BREAKING weeklyLIGHT DUTY BREAKER SDS MAX £30.00

MEDIUM DUTY BREAKER 950 £34.00

HEAVY DUTY BREAKER £42.00

POINTS/CHISELS £2.50

CORE DRILLS weeklyALL SIZES AVAILABLE (SALE ONLY) POA

IMPACT WRENCH weekly110v 1⁄2" SQ DRIVE 12 - 32mm £20.00

110v 3⁄4" SQ DRIVE 12 - 36mm £22.00

IMPACT SOCKETS AVAILABLE POA

CORDLESS DRILLING & FIXING weekly14/18v 13MM CHUCK COMBI DRILL £18.00

18v 10mm CHUCK ANGLE DRILL £18.00

18v IMPACT DRIVER £16.00

18v IMPACT WRENCH 1⁄2" SQ DRIVE £18.00

24v CORDLESS HAMMER DRILL SDS PLUS £24.00

36v CORDLESS HAMMER DRILL SDS PLUS £26.00

40

41


GRINDING & CUTTING

42


GRINDING & CUTTING weekly4" & 41⁄

2" MINI GRINDER £8.50

41⁄2" 18v CORDLESS GRINDER £18.00

5" ANGLE GRINDER £15.00



12" PETROL SAW £40.00

JIGSAW £16.00

18v CORDLESS JIGSAW £24.00

FEIN RECIPROCATING PIPE SAW 100-325MM COMPLETE WITH CLAMP £75.00

RECIPROCATING SHARK SAW £22.00

18v CORDLESS SHARK SAW £24.00

14" 2414 CHOP SAW £20.00

BAND SAW MA615 £105.00

CROSS CUT MITRE SAW £48.00

270mm CIRCULAR SAW £20.00

NIBBLER 110v JN1601 1.6mm CAPACITY £25.00

NIBBLER 110v JN3200 3.2mm CAPACITY £30.00

RIDGID 590L DRY CUT SAW 5" CAPACITY £40.00

MAKITA 18v CIRC METAL CUT SAW (136mm BLADE) £26.00

RIDGID STUD CUTTER M8 OR M10 £12.00

HITACHI CORDLESS STUD CUTTER M10 £30.00

ARMORGARD CUTTING STATION (does not include chopsaw) £46.00

PLASMA CUTTERS (Requires compressor 8cfm) weekly415v PC60 CUTTER £115.00

415v PC105 CUTTER £140.00

9CFM COMPRESSOR 110v 32amp £38.00

42

Blades for the above tools sold seperately POA

43


SITE SERVICES

44


MOBILE PIPE RACKS weekly1 TON CAPACITY 3m - FOLDING PIPE RACK £26.00

2 TON CAPACITY 3m - 2 PIECE COLLAPSABLE £26.003.2 TON CAPACITY 6m - 3 PIECE COLLAPSABLE £34.00

SITE SECURITY & STORAGE weeklySITE BOX 1m x 480 x 480 £12.00SITE BOX 1.2m x 600 x 600 £12.00SITE CHEST 1.52m x 860 x 760 £16.00SITE CHEST 1.52m x 1.2 x 800 £16.00CHEMICAL STORE £28.00ARMORGARD BARRO BOX £12.00ARMORGARD SITESTATION £49.00ARMORGARD POWERSTATION £29.50ARMORGARD ROLLING WORK BENCH C/W CHAIN VICE & ENG VICE £27.50All above can be supplied with fitted castors

ARMOURGUARD CUTTING STATION (does not include chopsaw) £46.00BOTTLE CAGES 1800 x 850 x 850 £16.00BOTTLE CAGES COLLAPSABLE £18.50SITE SECURITY FENCING PER PANEL £3.90SECTIONAL STEEL SITE HUTS POAMOBILE STORAGE CAGE 1800 x 1200 £22.00MOBILE FITTINGS STORE £16.00DOUBLE FITTINGS STORE £20.00COPPER COFFIN 3m £15.00COPPER COFFIN 6m £25.00

GENERATORS weekly2.7 KVA PETROL £38.003.4 KVA PETROL £46.005 KVA PETROL £62.004 KVA DIESEL £62.006 KVA DIESEL £75.007 KVA DIESEL SUPER SILENCED £80.0010 KVA DIESEL SUPER SILENCED £95.00TIN 12 SPEC BRUSHLESS GENERATOR FOR USE WITH ELECTRO FUSION MACHINE £60.00JERRY CAN £2.50205lt DIESEL DRUM SALE ONLY

45


TRANSFORMERS weekly3 KVA PORTABLE TWIN 16amp 110v £6.505 KVA PORTABLE TWIN 16amp 110v + SINGLE 32amp £9.505 KVA, SINGLE PHASE £14.0010 KVA, SINGLE OR THREE PHASE £20.003.5v KVA STEP UP 110V TO 240v 16amp TRANSFORMER £16.50

LASER LEVEL weeklyLasermark LM800 Dual Grade £65.00

EXTENSION LEADS weekly2.5mm CABLE 14m 110v 16amp £3.004mm CABLE 14m 110v 32amp £4.503 PHASE 415v 32amp 15m £10.50SPIDER BOX 110v 16amp £3.50

SITE LIGHTING weeklyFESTOON LIGHTING PER 25m £6.50FLUORESCENT TASK LIGHT 1.2m ON STAND £6.50FLUORESCENT LINK LIGHT 600mm ON FLOOR STAND £6.50FLUORESCENT EMERGENCY BACK UP LIGHT £12.50ECO LIGHT 110v £7.50SUPALITE K9 PORTABLE WORK LIGHT £25.00

VACUUM CLEANERS weeklyDRY / WET VAC SINGLE MOTOR 110v 16AMP £32.00

DRY / WET VAC TWIN MOTOR 110v 32AMP £42.00

PUMPS weekly110v 2" SUBMERSIBLE 50 GPM £40.00110v 1" PUDDLE PUMP / SUBMERSIBLE £40.00PETROL TRASH PUMP 3" INLET/OUTLET £90.00TRANSFER PUMP 110v £40.00REMS SOLAR PUSH K60 FLUSHING CLOSED SYSTEMS £58.00C/W CHANGEOVER VALVE

TRANSFORMERS

ELECTRICAL CABLE CRIMPING & CUTTING


47

CRIMPING TOOLS weeklyManual hydraulic crimping tool HT131-CFor use on Copper lugs

10-400 mm2 £95.00

Hydraulic crimping head c/w foot pump ECW-H3DFor use on Copper lugs

10-630 mm2 £165.00

Cordless 18 volt crimping tool Ridgid RE60For use on Copper lugs

10-300 mm2 £95.00

CUTTING TOOLS weeklyHydraulic cutting tool HT-TC051For cutting standard copper or aluminium cable to maximum diameter of 50mm

£55.00

Hydraulic cutting tool HT-TC0851For cutting standard copper or aluminium cable to maximum diameter of 85mm

£85.00

Hydraulic cutting head c/w foot pump TC120 120mm max For cutting standard copper or aluminium cable to maximum diameter of 120mm or 4 core armoured cable with a maximum diameter of 80mm

£130.00

Hydraulic cutting head (no foot pump) TC 120For cutting standard copper or aluminium cable to maximum diameter of 120mm or 4 core armoured cable with a maximum diameter of 80mm

£85.00

Cordless 18 volt cutting tool KlaukeFor cutting standard copper or aluminium cable to maximum diameter of 45mm

£60.00

Cordless 18 volt cutting tool B-TC500EFor cutting standard copper or aluminium and telecommunication cable to maximum diameter of 50mm

£65.00

Cordless 18 volt cutting tool B-TC950For cutting standard copper or aluminium and telecommunication cable to maximum diameter of 95mm

£85.00

AA frame gantry 37 Acetylene Cylinder 27Angle Drill 39Angle Grinder 42Axxair Cutter 20Aquatherm socket fusion 23

BBarrel Bund 26Barrel Pump 26Band-saw 42Benches and vices 21Bottle Cages 44Builders Steps 30Barro Box 44 CCable Crimping/Cutting 47Cable Jacks 37Cantilever Towers 29Cast iron tools 22Cembre Hydraulic Crimping Tool 47Chain Blocks 36Chain Wrenches 17Chemical Store 44Chop Saw 42Combination Ladder 31Compressor 19Concrete Breaking 40Cordless Angle Grinder 18v 42Cordless Drilling Fixing 40Conex Banninger B Press 13Copper Cutters 20Copper Coffins 44Copper tools 22Cordless Shark Saw 42Core Drills 40Counter Balance Floor Crane 36Cross Cut Mitre Saw 42Cut & Weld Kit 27Cutting Station 42, 44

DD Shackles 37Dealing Desk Towers 30Diesel 205L Drum 44Drain Bungs 19Drain Testing 19Drip Tray 17Dry Diamond Core Drilling 40Dry Cut Saw 14" 42Dry Vac 45Due Cento 20

EElectro Fusion Machine 24Enfusion 24Electrical Cable Crimping & Cutting 47Electric 110v Bender 21Extension Ladder 31Extension Leads 45Eco Lift 33

FFestoon Lighting 45Fire Extinguisher 26Flat Bed Trolley 36Floor Crane 36Fluorescent Emergency Back up Light 45Fluorescent Link Light 45Fluorescent Task Light 45Foldeasy Towers 30Full Size Cylinder Trolley 27Fume Eliminator 26Filtration Extract 26Fume Extractor 26

Fusion Accessories 24Fusion Clamps 24Fusion Machine 5 kva Generator 24

GGas purging 19Geberit HDPE 23Geberit Mapress Carbon 6Geberit Mapress Copper 5Geberit Mepla 7Genie GR Series 33Genie Material Lifts 35Genie Lift - Pipe Holding Kit 33Genie Scissor Lifts 33Generators 44GF Cut and Bevel Machine 20Girder Trolley / Clamp 37

HHammer Drills 39Handling and lifting accessories 37Hand held threading machines 17Hilmor Stand Bender 21Hilmor Conduit Bender 21Hilmor Scissor Bender 21Hilti Range 39Horse Bench 21Hydraulic Cutting Tool 47Hydraulic Jacks 37

IImpact Wrench 40Inertia Reel 37Inverter Remote Control 26Inverter Welder 26

JJerry Can 44Jigsaw 42

LLaser Level 45Lead Burning Kit 27Lead Melting Pot Ladle & Furnace 27Lighting 45Lightweight Staging 31Lincoln Mobiflex extractor 26

MMachine Guards 17Manual Pipe Cutters 20Man Riding Tripod 35Makita 18V Circ 42 Manhole Lift Cradle 36Mid Size Cylinder Trolley 27Miller DC Inverter 26Minifor 37Mobile Fittings Store 44Mobile Pipe Racks 44Mobile Storage Cage 44Mobile Towers 29Monkey Tower Mini 30

NNibbler 42Nipple Chuck 17Nitrogen Cylinders 27Nylon Machine Skates 37

OOrbital Cutters 20Oxy/Propane Cutting & Heating kit 27Oxygen Cylinder 27

PPallet Trucks 36Pannel Lifter 36

Petrol Saw 12" 42Petrol Trash Pump 45Pipe Assembly Tool 22Pipe Bending Hydraulic 21Pipe Bogey 36Pipe Freezers 21Pipe Holding Kit (Power Tower) 33Pipe Roller Stands RJ98 17Pipe Stilsons 17Pipe Support 17Pipe Threading 17Pipe Testing 19Plasterboard Trolley 36Plasma cutters 42Platform Steps 31Podium Steps 30Points/Chisels 40Polypipe HDPE 23Polypipe Presstools 14Pop Up Products 33Porta Pack Cylinder Trolley 27Portable Handling 36Portable telescopic gas hoist 35Portastore 44Powered Pipe Cutters 20Powerstation - Armorguard 44Power Tower Products 33Pressure testing 19Press system accessories 15Propane equipment 27Propane Torch 27Propane Torch Kit & Cylinder 27Puddle Pump 45Pulling Tool 22Pumps 45Push around vertical 33Peco 33

RRatchet Hand Dies 17Receder 17Reciprocating Shark Saw 42Record 45 22Rehau Presstools 14Rems Amigo 17Rems Curvo 110v Bender 21Rems Eskimo Freezer 21Rex Threading Machine 17Ridgid Threading Machine 17Ridgid 258 20Ridgid 258XL 20Ridgid 2A Pipe Roller Cutter 20Ridgid 300c Threading Machine 17Ridgid 466 Hinged Four Wheel Cutter 20Ridgid 4S Pipe Roller Cutter 20Ridgid 550 reciprocating saw 20Ridgid 690 17Ridgid 6S Pipe Roller Cutter 20Ridgid 868 Hinged Four Wheel Cutters 20Ridgid 915 Insitu Portable 18Ridgid 915/914 Portable 18 Roll grooving 18Ridgid 916 Portable Roll Groover 18Ridgid 918 Groover, Power Drive 18Ridgid 918 Hydraulic Groover 18Ridgid 918 Stabilizer Kit 18Ridgid 975 Combo Insitu 18Ridgid Die Head 17Ridgid Hand Test Bucket 19Ridgid HC450 Hole Cutter 18Ridgid RE60 Crimping Tool 47Rod Quiver 26Rolling Crow Bar 37Rolling Work Bench 44Roustabout 35

Rotary Drills 39Rotary Hammer Drill Cordless 39Roto Broach 39Rubber Drain Test Bags 19

SSales Items 3Sack Barrow 36Safety Harness 37Sanha Carbon Steel 11Sanha Copper 10Sanha Multi Layer 11Sanha Stainless Steel 11Self-propelled access 33SDS Hammer Drill 39Sectional Steel Site Huts 44Sherpa Scopic Steps 30Sheer legs 35Site Box 44Site security 44Site Security Fencing 44Site Station 44Site storage 44Skorp Cutter 20Slings 37Snap Cutter 22Snorkel 33Squeeze Off Tool 24Stair Climbing Sack Barrow 36Stairway Towers 29STIHL saw 42Stud Cutter 42Submersible pump 45

TTig set 26Tirfor Winch 37Transformers 45Tripod Vice 21Tubela Ratchet Bender 21Tubela Rotary Scissor Bender 21

UUponor Multi-Layer 14

VVacumn cleaners 45Victaulic Adjustable Pipe Stand 18Victaulic 272SFS Roll Grooving 18Victaulic VE416 FSD 18Viega presstools 12

WWater Test Pump 19Wavin 13Welder Generators 26Welders 26Welding accessories 26Welding Clamps 26Welding Leads 26Welding Screen 26Welding Shelter 26Wet Vac 45Winch 37Work Benches 21

YPegler Yorkshire Xpress Carbon/stainless 9Pegler Yorkshire Xpress Copper 8Pegler Yorkshire Xpress Multi Layer 9Youngman X3 Series 33

INDEX page page page page

Head Office; Southern DepotUnit 10 Trade City,Ashton Road,Romford,Essex,RM3 8UJ t: 01708 383350

Midlands Depot Unit B1,Venture Crescent,Motorway Lnk Industrial Estate,AlfretonDE55 7RAt: 01773 609789

South West Depot 31-32 Hither Green Industrial Est.Clevedon,Bristol,BS21 6XUt: 01275 875587

Southern DepotSouth West Depot

Midlands Depot

Broughton Plant Hire was formed in 1984 as a trading division of Michael Broughton Ltd Est 1969 and specialises in the hire and sale of plant and equipment to the mechanical, electrical and fire protection industries.

Now established in the industry for over 30 years Broughton Plant Hire has a wealth of experience and expertise throughout the business from our engineers and depot staff through to our hire desk and management team. This combined with our commitment to ensure that our customers receive the best service possible and a constant investment in our hire fleet has allowed us to build a reputation in the industry of supplying our customers with quality tools and equipment at short notice.

Broughton Plant Hire and Sales has a wide and extensive fleet of small tools, plant and equipment and are the market leaders in the hiring, servicing and maintenance of pressfitting tools. We are an approved tool provider and calibration centre for a number of press fit manufacturers such as Geberit, Pegler Yorkshire, Sanha, Viega, Wavin and IBP Conex. We are also a specialist supplier in low level access and operate and maintain a large fleet of podium steps and push around vertical lifts. We are proud distributors and service agents for the following manufacturers: Ridgid, Novopress, Rems, Power Tower, Youngmans and Armorgard Security Products. We currently have 3 depots located in Essex, the Midlands and Bristol from which we operate a fleet of over 35 vehicles

Head Office; Southern DepotUnit 10 Trade City,Ashton Road,Romford,Essex,RM3 8UJ t: 01708 383350

Midlands Depot Unit B1,Venture Crescent,Motorway Lnk Industrial Estate,AlfretonDE55 7RAt: 01773 609789

South West Depot 31-32 Hither Green Industrial Est,Clevedon,Bristol, BS21 6XUt: 01275 875587

e: [email protected]

Documents

Broughton hire guide 2016/17