Kami dari PT. Mitra Morakarya Tehnik bergerak dalam bidang supplier spare part industri, fabrikasi, perakitan, instalasi, peralatan mekanikal-electrikal dan automasi serta program.Selain menyediakan berbagai jenis spare part untuk industri kami juga melayani :1. jasa perbaikan mesin, pengelasan, perakitan, pengecatan dan perakitan (automasi ), instalasi bagian-bagian mekanikal dan elektrikal. 2. jasa perancangan, fabrikasi, instalasi, program dan perbaikan (service )Kami selalu memberikan pelayanan yang terbaik untuk customer dan menjadi mitra kerja yang memuaskan.
Industrial Automation System ServiceSpecial Purpose
AutomationMachineConveyor System Tolls and MachiningElectrical and
Mechanical SupplierEfficient and Robust Automation Solusitions
INTRODUCTIONOffice Network(Mainly Ethernet based)IPC =Industrial
Personal ComputerPLC =Programmable Logic ControllerThese says, it's
hard to image the production landscape without industrial
automation systems. Growing requirements of high product quality,
paired with expectations of equally high -volume production, mean
that the scale of industrial automation will continue to grow. Much
of what previously produced by human hand can no longer be achieved
in terns of cost and quality. Energy efficiency, mobility and
security arethe main challenges facing modern society. Mitra
Morakarya Tehnik, PT industrial automation product address all of
these needs. Providing outstanding reliability and rebustness,
exellent quality and leading-edge innovations. Rich Funtionality
and extensive integration capabilities ensure easy design-in and
fast time-to-market, TheIndustral automation application is
presented in the following level: The automation level illustrates
the three main levels as wll as the intercommunication between
them.Supervisor Level (e.g.,IPC)Control Level(e.g.,PLC)Factory
Network(Field Bus Based)Field Level (e.g.,Peripheral Module)Sensor,
Actuator Interface (Mainly point-to-point)Field Bus )Head
Office:Sentra Niaga Square F-28 Graha AsriCikarang-Bekasi 17836;
Tel : 021-89142788, 021-98131447,fax 021-89142788E-mail :
[email protected] of BusinessIndustrial Automation
UnitINSERTINGPRESSINGPIN MACHINEPT MITRA MORAKARYA
TEHNIKThismachine is the improvement on the speed and the precision
that applicable in the production of compressor crankcase that
usedfor Motor Car Air Conditioning , The advatage of this machine
onsuch below features:* The production capacity will increase five
time compare with manualssystem. This is a result combining two
process such as pininserting and crankcase pressing process* The
precision level on the dimension can achieve 0.02 mm
tolerance.*This macine warranty the quality by using part or
component of japan and europe made.* The machine is automation
control base system with type CJ1M* The machine is featured with
safety system for both human safetyandThis machine is applicable
for sealingprocess on crankcase automaticallywith some beneficial
such as:* Themachine already using combination of both servo driver
and SMC system.* The precisan of sealant positioning can achieve
0,1 mm tolerance.* Sealant volume can control by using nozzle with
diameter size 1 mm.* This machine is using PLC control type
CJ1M-CPU22.* Good quality of mechanical and cashing taht using corm
plating, aluminium profile, "Misumi" parts, and support by surface
treatment Thismachine is using for making marking on the crankcase
automatically with below specifications :* This machine system
using PLC control type CPM2C-20CDT.* The marking capacity can
achieve 0,2mm.* The machine id completed with human safety and
preasure safety.* Good quality of mechanical and chasing taht using
corm plating,alumionium profile, "Misumi' parts, and support by
surface traetment precision of 0,02mm tolerance.* Cover unit using
acrylic transparant 5mm.SEALENTCRANKCASE MACHINEMARKINGCRANKCASE
MACHINEE-mail : [email protected] Office:Sentra Niaga
Square F-28 Graha AsriCikarang-BekasiTel : 021-89142788,
021-98131447,fax 021-89142788E-mail :
[email protected] of BusinessIndustrial Automation
UnitAUTO SOLDERING MACHINE"MitraMorakarya Tehnik" auto soldering
machine is the combination of automation technology and mechanical
and electrical system with some beneficial features as :* The
moving part using motor servo as driver with pointing precisian can
achieve 0,0002mm and using PLC control program type C1JM-CPU23.*The
relay production capacity can achieve 20 pcs take in-out.* Can
detect the soldering quality as on setting standard.* Featured with
weekly timer for it is heater machine.* Featured with human safety
device and pressure safety.* Featured with touch screen display
control of type NT21, brand of Omron,or equivalent.* Good quality
of electrical parts which produced by Japan and Europe This machine
is using for twisting the yarn for making hair of " Barbie
Doll"manually that complete with some features such as :*
Temperature sensor that using for detecting the temperature during
twisting process by application of some save hold relay or relay
scanner.* Good quality of mechanical and cashing that using corm
plating, almuminium profile, "Misumi" parts, and support by surface
teratment precision of 0,02 tolerance.* The machine is using
Acrylic transparant cover with 5mm thickness.This machine is using
for trainning kitthat support by component such as :* Proximity
sensors that function for detect the Relay-leg and support by PLC
control type CP1A-30CDR.* The machine can automatically split the
good output and no good output trainning.* This machine using good
quality for casing and other mechanical CURLINGMACHINETRAINNING
KITE-mail : [email protected] Office:Sentra Niaga
Square F-28 Graha AsriCikarang-BekasiTel : 021-89142788,
021-98131447,fax 021-89142788E-mail : [email protected]
MITRA MORAKARYA TEHNIKScope of BusinessIndustrial Automation
UnitIndustrial Automation Winding CableThis machine is functionfor
detecting relay contact (continuity) manually with good precision
and this machine is complete with flicker speed quality adjustment
with below specifications:* This machine is using control type
CPM1A-30CDT.* The machine complete with pressure safety sensor.*
Good quality of mechanical and casing that using corm plating,
aluminium profile, "Misumi" parts, and support by surface teratment
precision of MANUAL COUNTIUNITY MACHINEE-mail :
[email protected] MACHINEThis machine is using for
checkingthe precision of Relay-leg size automatically that support
by component such as :* Proximity sensors that function for detect
the Relay-leg and support by PLC control type CJ1M-CPU11.* The
machine can automatically split the good output and no good output
for the amount 4 pcs at the same time.* The production speed can
achieve 2 pcs per second.* The precision level can achieve 0,1mm
tolerance.Head Office:Sentra Niaga Square F-28 Graha
AsriCikarang-BekasiTel : 021-89142788, 021-98131447,fax
021-89142788E-mail : [email protected] MITRA MORAKARYA
TEHNIKIndustrial Automation MC Insert BondingIndustrial Automation
MC PressingCrankcase 1 TonIndustrial Automation Trainning
KitTrainning TeknisiIndustrial Automation Process WiringE-mail :
[email protected] MITRA MORAKARYA TEHNIKHead
Office:Sentra Niaga Square F-28 Graha AsriCikarang-BekasiTel :
021-89142788, 021-98131447,fax 021-89142788E-mail :
[email protected] Automation UnloaderTools &
MachiningEquipment SupportingHand CuttingHand DrillingGrinding
MachineSurface Milling & Lathe MilingCNC LatheManual LatheCNC
Lathe CNC CenterCNC LatheHead Office:Ruko Sentra Niaga Square F-28
Graha AsriCikarang-Bekasi 17836; Tel : 021-89142788,
021-98131447,fax 021-89142788E-mail :
[email protected] : [email protected] MITRA
MORAKARYA TEHNIKPT. Mitra Morakarya TehnikRuko Sentra Niaga
SquareF-28 Graha AsriCikarang-Bekasi Jawa Barat 17836; Phone :
021-89142788, 021-98131447Fax : 021-89142788E-mail
:[email protected]. Mitra Morakarya TehnikJl. Desa
Telajung RT 02 RW08 Kampung TelajungCikarang-Bekasi Jawa Barat
17836E-mail :[email protected] ShopHead OfficeE-mail :
[email protected]
