BRO_Senior Orifice Fitting Cat100_EN

Senior® Orifice Fitting Brochure

Overview

Styles of Fittings

Catalog Numbering System

Standard Specifications

Special Features

Installation

Removing/Replacing the Plate

Representative Operating Sequence

Maintenance

Seals

Drawings

Raised Face Flangnek 2"-14" Class 150-900

Ring Joint Flangnek 2"-14" Class600/900, 2"-6"Class 1500, 2500

Raised Face Flanged 2"-14" Class 150-900,2"-12" Class 1500, 2"-6" Class 2500

Ring Joint Flanged 2"-14" Class 600/900, 2"-12"Class 1500, 2"-6" Class 2500

Weldnek 2"-14" Class 600/900, 2"-12" 1500,2"-6" Class 2500

Dimensions

Flangnek Raised Face Class 150, 300, 600, 900,1500, 2500

Flangnek Ring Joint Class 600, 900, 1500, 2500

Flanged Raised Face Class 150, 300, 600, 900,1500, 2500

Flanged Ring Joint Class 600, 900, 1500, 2500

Weldneck Class 600, 900, 1500, 2500

Parts

2"-14" Class 150-900

2"-12"' Class 1500

2"-6" Class 2500

Product OverviewSENIOR ORIFICE FITTING

Allows plate changing under flow conditions.

View of Early Daniel Plant

When Paul Daniel developed his first orifice fitting in the early1930's, he knew that he had a good idea and a sounddesign. But he could not have realized that 60-plus yearslater there would be hundreds of thousands of Senior OrificeFittings in use worldwide and that Daniel Industries would bethe world leader in the manufacture of orifice measurementequipment.

Today, the Senior Orifice Fitting is only one of the manymeasurement products supplied by Daniel Industries, Inc.And, because of Daniel's commitment to high qualitymanufacturing and service, the Senior Orifice Fitting isaccepted as the industry standard and is much preferred fora wide range of applications.

Since its original development, the Senior Orifice Fitting product line has grown enormously to includeapplications for pipeline sizes from 2" to 48" and pressure ratings up to 10,000 pounds per square inch. Inaddition, the use of corrosion-resistant and special materials make these products suitable for sour serviceand other special applications.

The many outstanding features found only in Daniel Senior Fittings are the result of many years ofexperience and research into flow measurement. In fact, the term "Senior" applied to an orifice fittingspecifically denotes the Daniel designed Dual-chamber Orifice Fitting. This fitting provides a fast, safe andextremely simple method of changing orifice plates under pressure without interrupting the flow andeliminates costly by-passes, valves and other fittings required with conventional orifice flange installations.

Daniel's most popular Senior Orifice Fitting, the "Flangnek," has aweldneck inlet and a flanged outlet. Daniel fittings meet or exceedAPI Chapter 14, Section 3, Part 2 (14.3/AGA 3) and ASME coderequirements. They are usually furnished with Daniel Meter Tubes,which are designed and manufactured under a controlledfabrication environment to assure that customer/code specificationsare met.

Daniel Industries has been a stable, growing company since PaulDaniel started it moving in the 30's. The multifaceted company hasbeen expanding into high-tech electronics to complement itstime-proven flow measurement devices and other flow controlproducts. This expanded product line, combined with the solidDaniel reputation, ensures our customers that Daniel is committedto producing the very best in flow control systems and individualcompatible components.

Daniel's Katy Road Flow ProductsFacility

One person can operate the Daniel Senior Orifice fitting.1. Available in 2" thru 48" line size up to ANSI 2500, API 10,000psi.

2.

Accomodates a wide variety of fluid flows with selected plateseal designs and materials.

3.

Styles of Fittings

CONTROLLED FABRICATION ENVIRONMENT●

ASME-QUALIFIED WELDERS●

AVAILABLE OPTIONS:●

RADIOGRAPHY●

SPECIAL PAINT SYSTEMS●

FLOW CALIBRATION●

MEETS OR EXCEEDS API CHAPTER 14, SECTION 3, PART 2 (14.3/AGA 3)

Catalog Numbering System

Daniel Senior Orifice Fitting Catalog Numbering System

6" (6.065) 01 5 DS "A"Code Explanation/Example

6" Nominal Line Size

(6.065) Internal Diameter

01 Fitting Style01 Raised Face Flangnek10 Raised Face Flanged18 Weldneck014 Ring Joint Flangnek14 Ring Joint Flanged

5 Pressure Rating ANSI1 150#3 300#5 600#6 900#7 1500#8 2500#

DS Orifice Plate Seal MaterialDS Removable Dual Seal (up to 10")DVS Dual Vulcanized Seal (12" and up)TS Removable Teflon Seal (up to 24")MS Removable Metal Seal (up to 24")SN Removable Snap Seal* (up to 20")

"A" Internal Trim Material"A" Standard"AASG" Sour Gas/Corrosive ServiceNACE

WHEN ORDERING, PLEASE SPECIFY:

Catalog Number1. Plate Material2. Plate Bore(s)3. Quantity4.

*Patented

Note: All products and components are subject to change without notice in a continuing effort of product

improvement.

Standard Specifications

METER TAPS: All Daniel Orifice Fittings are provided with two sets of "Flange Taps," located in accordancewith latest ANSI/API 2530 (AGA #3) recommendations.

FLANGE TAP SPECIFICATIONS: Flange tap meter connections are 1/2" NPT. Internal tap hole sizes followlatest ANSI/API 2530 (AGA #3) recommendations. Internal edges of tap holes are free from burrs and squareedged.

LINE BORE TOLERANCES: 2-inch and 3-inch sizes, plus or minus .003"; 4-, 6-, 8-, and 10-inch sizes, plus orminus .004"; 12-inch and larger sizes, plus or minus .005". Unless otherwise specified, all fittings are furnishedwith standard internal line bore as listed in dimensional tables.

OPERATING SHAFTS: On sizes 2-inch to 14-inch inclusive, single operating shafts are standard on left side offitting when looking downstream. On sizes 16-inch and larger, operating shafts on both sides of fitting arestandard.

The Senior Orifice Fitting is composed of two independent compartments separated by a hardened stainlesssteel slide valve.

Side sectional view below left shows the slide valve in closed position and orifice plate concentric in line of flow.Slide valve cannot be closed unless orifice is concentric to bore of fitting.

Photo, below right, shows the Daniel top closure in opened position with plate carrier in place for change orinspection of orifice plate. Only a few turns of the speed wrench are required to loosen screws to remove orreplace clamping and sealing bars. Set screws always remain in clamping bar. This feature adds greatly tospeed and ease of operation.

Plate carrier is raised and lowered by double rack and pinion mechanism with power applied through speedwrench. This method provides the quickest means of operation with the least amount of effort and assurespositive control of plate carrier at all times.

All parts, including the essential slide valve assembly, may be replaced or repaired without removing fitting fromline.

TEMPERATURE UNITS: Standard trim fittings Class 150-900 are suitable for -20 to +450ºF service. Class1500 and 2500 are suitable for service in -20 to +275ºF. However, the Orifice Plate Seal used may limit theservice temperatures. See document entitled "Orifice Plate Sealing Units" for details. Special trims and sealsare available for higher or lower temperature service. Please consult factory.

INDICATOR PLATE: Standard on all Senior Orifice Fittings, this plate clearly shows the direction of the openand closed position of the Slide Valve.

OPERATING WRENCH: A speed wrench is provided with each fitting for quick operation of the shaft and

pinions.

HYDROSTATIC TESTING: All Daniel Senior Orifice Fittings are hydrostatically tested in accordance with ANSIB16.34.

PLATE ALIGNMENT: The plate carriers in all Senior fittings are centered using a fixed three point positioningsystem. This assures concentricity within the fitting in accordance with the latest ANSI/API 2530 (A.G.A. Report#3).

...........................

Orifice Plate Sealing UnitsThe Daniel Dual Seal is the most simple and practical orifice platesealing device for normal flowing streams. It is precision moldedfrom 70-80 shore nitrile synthetic rubber** and provides fourrubber-to-metal sealing surfaces 360º around the plate. The unitspositively seal against both outer faces of the plate and againstboth seats of the orifice fitting to prevent leakage.

On request, a special metallic-oxide lubricant coated "DSC" seal isavailable. In 1-1/2" to 10" sizes, the "DSC" is interchangeable withDaniel "TSC" and "MSC" seal units. In 12" sizes and up, the seal isbonded from 80-90 shore rubber directly to the outer edge of theorifice plate at the factory. If damaged, the "DVSC" seal and platemay be returned to the factory for revulcanizing. The "DSC" and"DVSC" seals are used in pressure ratings to 600 lbs. ANSI, intemperatures from -20ºF to +275ºF.

"DSC" in 2"-8", "DS" in 10" *US Patent # 5085250. **Also available in Viton.The Daniel Snap Seal Ring is a removable orifice plate holderdesigned for use in services where elastomer seal swelling is aproblem. Certain media, such as ethylene or carbon dioxide maycause seal swelling when other type holders are removed fromhigh-pressure service.

The Snap Seal Ring unit consists of two symmetrical metal rings,each one having an O-ring on both sides for a positive seal on theplate side and the fitting side of the ring. These rings center andsecure the orifice plate between them. The assembled unit providesa full 360º rubber-to-metal seal around both sides, even in theabsence of any pressure differential. No special tools are requiredfor assembly or disassembly.

The Snap Seal Ring is designed for service temperatures rangingfrom -20ºF to +275ºF (standard O-rings) to -67ºF to +437ºF (VitonO-rings). It is available for line sizes of 2" through 16". Whenordering, please specify nominal line size, schedule, platethickness, and flowing media or material choice. The unit isavailable in 316 stainless steel and cadmium-plated carbon steel.

"SSRC" 2"-8", "SSR" 10" & up *US Patent # 4,478,251.

The Daniel Teflon Seal is a superior orifice plate sealing unit fordifficult, corrosive flows and for higher temperatures than the "DSC"unit can handle. The "TSC" has proven effective in such flows asdilute sulphuric acid, fuming nitric acid, hydrazine, liquid oxygenand other unusual flows, from -65ºF to +500ºF.

The two-piece unit consists of an inlet ring which fits around theplate outer diameter, and a downstream ring fitted with metal clipsfor assembling the unit. A special lip on this ring plus an annulargroove* provide compression to effectively seal off the plate. The"TSC" unit can be assembled or taken apart by hand and isinterchangeable in 1 1/2" to 10" sizes with Daniel "DSC" and "MSC"seal units.

The Teflon seal is recommended for services with pressure ratingsof 900 lbs. ANSI to 2500 lbs. ANSI or lower pressure serviceswhere rubber seals may not be satisfactory. Size 14" and largernow have graphite added for lubricity and ease of movement.

"TSC" 2"-8", "TS" 10" & up *This groove should be spread by inserting a blunt object such asscrew driver and rotating 360º to reengage the spring lip after eachuse.

"MSC" 2"-8", "MS" 10" & up

The Daniel Metal Seal is a stainless or cadmium-plated carbonsteel clip-ring assembly recommended for high pressures and fortemperatures up to 1200ºF. The assembly consists of an upstreamand a downstream ring. The upstream ring has a recessed grooveinto which a thin leaf-spring is inserted. When the plate is clampedbetween the rings, the spring provides the necessary compressionto seat the plate against the downstream ring and effect a seal.

"MSC" Seal Units of cadmium-plated carbon steel arerecommended for services to +600ºF, standard 316 stainless steelunits to +1000ºF, and 316 stainless steel units with an iconel springto +1200ºF. The "MSC" seal unit can be assembled or taken apartby hand and is interchangeable in 1-1/2" to 12" sizes with Daniel"DSC" and "TSC" seal units.

...........................

Special Features

ORIFICE PLATE SEALING UNITS, designed and patented by Daniel, give positive seal between orifice plateand body seats. Available for a variety of services.

PLATE CARRIER protects orifice plate at all times while inserting or removing from fitting.

TOP OUTSIDE GUIDE BRACKETS with pinion and roller assembly are standard equipment on 18-inch andlarger Senior Fittings. Orifice plates can be inspected or changed without disengaging plate carrier frompinions.

INDICATOR PLATE clearly shows the position of the slide valve within the fitting.

TEFLON SHAFT PACKING AND CENTERING RINGS are standard equipment on all Daniel Senior OrificeFittings in all sizes and ratings.

FITTINGS up to and including 12" line size can operate in a vertical up flow condition or positioned in horizontalflow for side opening.

COMPACT DESIGN requires minimum operating space.

ALL DANIEL SENIOR ORIFICE FITTINGS are designed and manufactured to meet latest ANSI/API/AGArecommendations, and in strict accordance with latest A.S.T.M. specifications.

HIGH PRESSURE FITTINGS

Class 1500Class 2500 (See Note A)

The drawing above shows in detail the extra-heavy construction of the wall sections and essential parts on theClass 1500 Senior Orifice Fitting.

NOTE: Body/Top Gasket--peroxide cured nitrile O-ring for Class 1500 fittings. Male and female gasket joint withParker seal gaskets for Class 2500 Orifice Fitting.

"TS" (All-Teflon) Orifice Plate Sealing Unit is standard in Class 900, 1500, and 2500 fittings.

Daniel Method of Aligning Meter Tube Flange to Orifice Fitting Flange

On all sizes, ANSI Class 300 or under, three dowel pin flange-alignment holes are drilled in the flanges.

Class 400 or higher, flanges are manufactured with close-tolerance, square-shouldered, large maleflange-facing on fitting and large female flange-facing on meter tube to assure proper internal alignment. Flangegaskets are precision-cut so that under compression they will not extend into internal bore of fitting. Refer toengineering drawing above.

SLIDE VALVE DETAIL

In Daniel Senior Orifice Fittings, the valve seat (Part No. 18) is a part of the upper chamber. The valve strip(Part No. 3) moves underneath this seat, thus utilizing line pressure to effect a positive seal. The valve strip ismaintained in "floating" position by minimum spring pressure.

Before slide valve is opened, it is lubricated through grease gun, No. 23. Pressure is then equalized throughoutthe entire fitting by operation of the equalizer valve, No. 1. Equalized pressure on both sides of the valve stripallows slide valve to move freely without wear. Valve seat and valve strip are ground for tight shut-off and areeasily removable for grinding if required.

InstallationRemove all foreign matter such as dirt, sediment or scale from fitting surfaces, connections and internalcavities which may have collected between factory inspection and delivery. Gasket the line flanges andinstall or weld the fitting in line, making sure flow arrow cast on body corresponds to flow direction.

1.

Install Bleeder Valve (Part No. 10B) and Grease Gun (Part No. 23) to connections provided on fittingwhich are shipped separately.

2.

The standard Senior® Orifice Fitting is assembled with the gear shafts located on the left side of thefittings as you are facing the fitting looking downstream. For this standard arrangement, rotate the SlideValve Gear Shaft (lower upstream shaft) clockwise until it stops to open the Slide Valve. Place SlideValve Indicator Plate (shipped separately) stamped "LH" on the Slide Valve Gear Shaft with the wordOPEN at the 12 o'clock position. Tighten the set screw (shipped separately) to fix the Plate on the Shaft.Use two drive screws (shipped separately) to install the Indicator Pointer on the fitting body so that itpoints to the world OPEN on the Plate. The Senior Orifice Fitting may have the optional "reversedshafts" arrangement where the gear shafts are located on the right side of the fitting as you are facingthe fitting looking downstream. In that case, rotate the Slide Valve Gear Shaft (lower upstream shaft)counterclockwise until it stops to open the Slide Valve. Place the Slide Valve Indicator Plate stamped"RH" on the Slide Valve Gear Shaft with the word OPEN at the 12 o'clock position. Tighten the set screwto fix the Plate on the Shaft. Use two drive screws to install the Indicator Pointer on the fitting body sothat it points to the word OPEN on the plate.

3.

When fitting is shipped, the Plate Carrier (Part No. 8DM) is enclosed inside the fitting and the OrificePlate is packaged separately.

4.

After installation, remove Drain Plugs (Part No. 30). Check for any foreign matter that may have becometrapped in fitting cavities. Install full-opening valves for blow-down operation.

5.

Removing/Replacing Orifice PlateTO REMOVE ORIFICE PLATE

Open Equalizer Valve(No. 1) Max two turnsonly

1.

Open Slide Valve (No.5)

2.

Rotate Lower PlateCarrier Gear Shaft (No.6)

3.

Rotate Upper PlateCarrier Gear Shaft (No.7)

4.

Close Slide Valve (No.5)

5.

Close Equalizer Valve(No. 1)

6.

Open Bleeder Valve(No. 10B)*

7.

Lubricate Thru GreaseGun (No. 23)

8.

Loosen Clamping BarScrews (No. 11); DONOT Remove ClampingBar (No. 12)

9.

Rotate Upper PlateCarrier Gear Shaft (No.7) to free Sealing Bar(No. 9) and Sealing BarGasket (No. 9A)

10.

Remove Clamping Bar(No. 12), Sealing Bar(No. 9), and Sealing BarGasket (No. 9A)

11.

TO REPLACE ORIFICE PLATE

Close Bleeder Valve (No.10B)

1.

Rotate Upper Plate CarrierGear Shaft (No. 7) slowlyuntil Plate Carrier is clear ofSealing Bar and Gasketlevel. Do not lower PlateCarrier onto Slide Valve.

2.

Replace Sealing Bar Gasket(No. 9A), Sealing Bar (No.9), and Clamping Bar (No.12).

3.

Tighten Clamping BarScrews (No. 11)

4.

Open Equalizer Valve (No.1)

5.

Open Slide Valve (No. 5)6. Rotate Upper Plate CarrierGear Shaft (No. 7)

7.

Rotate Lower Plate CarrierGear Shaft (No. 6)

8.

Close Slide Valve (No. 5)9. Close Equalizer Valve (No.1)

10.

Open Bleeder Valve (No.10B)*

11.

Lubricate Thru Grease Gun(No. 23)

12.

Close Bleeder Valve (No.10B)

13.

*When venting upper chamber through bleeder valve (#10B), direct fluid to a safe area using the threaded connectionat the valve discharge point.

CAUTION: Daniel Senior Orifice Fittings are operated under pressurized line conditions. Proper precautions must beexercised to protect personnel. Always read and follow OPERATING instructions and avoid placing any part of thebody in front of the top opening when the clamping bar is removed.

Representative Operational Sequence

OPERATION OF A DANIEL SENIOR ORIFICE FITTING

The valve seat and the valve strip are field replaceable or repairable (re-lapping) without removing thefitting from the line, reducing down-time.

Caution: This operational sequence is representational only and it not intended for use as a field guideto operations. Always read and follow the detailed operating instructions provided with each fittingbefore attempting to operate.

MaintenanceIt is recommended that all Senior Orifice Fittings be operated once every thirty days. Slide valve shouldbe opened and closed and lubricant should be applied through grease gun.

1.

If plate inspection is not required, rotate operating shafts anyway.2. In conditions where foreign matter accumulates, blow-down valves (as per installation instructions, StepNo. 5) should be used to clear dirt from fittings as often as required. Plate Carrier should always beraised into upper chamber before blowing or cleaning through blow-down valves.

3.

When pigging the line, a pigging ring is recommended to prevent dirt from being forced into the platecarrier cavity.

4.

Following the pigging operation, the blow-down valve(s) should be opened to clear out any accumulationof dirt which may have been forced into the plate carrier cavity.

5.

Dimensional DiagramsFLANGNEK - RAISED FACE2" Thru 14"Class 150-900

2" Thru 12" Class 15002" Thru 6" Class 2500

Dimensional DiagramsFLANGNEK - RING JOINT2" Thru 14"Class 600 & 900


Dimensional DiagramsFLANGED - RAISED FACE2" Thru 14"Class 150-900


Dimensional DiagramsFLANGED - RING JOINT2" Thru 14"Class 600 & 900


Dimensional DiagramsWELDING NECK2" Thru 14"Class 600 and 900


ANSI 150 Class

FLANGNEK - RAISED FACE

Catalog NO. 011DS--Class 150 (295 P.S.I.G.) C.W.P.--Dual Seal

Size 2 3 4 6 8 10 12 14

Diam. Internal Line Bore A 2.067 3.068 4.026 6.065 8.071 10.136 12.090 13.250

Upstream Face of OrificePlate to Face of End

B 5 1/4 5 5/16 5 7/16 5 9/16 6 3/16 6 7/16 7 3/8 7 3/8

Downstream Face ofOrifice Plate to Face of

End

C 5 1/4 5 5/16 5 7/16 5 9/16 6 3/16 6 7/16 6 3/8 7 3/8

Overall Face to Face D 10 5/8 10 3/4 11 11 1/4 12 1/2 13 14 15

Operating Clearance FromCenter

F 12 7/8 13 3/4 14 1/8 15 1/2 16 1/2 17 3/8 18 7/8 20 1/8

Body Clearance FromCenter

G 4 1/4 5 3/8 5 7/8 6 3/4 8 9 10 3/4 11

Centerline to Bottom H 3 3/4 4 4 1/2 5 1/2 6 3/4 8 9 1/2 10 1/2

Centerline to Top I 13 1/4 14 1/2 15 3/4 18 3/4 21 3/4 24 7/8 28 31 5/8

Clearance for PlateChanging

I1 5 9/16 6 1/16 7 9 11 13 1/8 15 17 9/16

Diameter of Flange J 6 7 1/2 9 11 13 1/2 16 19 21

Diameter of Bolt Circle K 4 3/4 6 7 1/2 9 1/2 11 3/4 14 1/4 17 18 3/4

Diameter of Raised Face+.000 -.005

L 3 5/8 5 6 3/16 8 1/2 10 5/8 12 3/4 15 16 1/4

Height of Raised Face M 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16

Flange Thickness N 3/4 15/16 15/16 1 1 1/8 1 3/16 1 1/4 1 3/8

Number and Diameter ofBolts or Studs (Per

Flange)

4- 5/8 4- 5/8 8- 5/8 8- 3/4 8- 3/4 12- 7/8 12- 7/8 12-1

Length of Bolts (Sq. headwith Hex. Nut)

2 3/4 3 3 3 1/4 3 1/2 3 3/4 4 4 1/4

Length of Bolt-Studs with 2Hex. Nuts

3 1/4 3 3/4 3 3/4 4 4 1/4 4 3/4 4 3/4 5 1/2

Diameter of Hub at Pointof Welding

O 2.375 3.500 4.500 6.625 8.625 10.750 12.750 14.000

Size of Drain Plugs P 1/2 1/2 3/4 3/4 3/4 3/4 3/4 3/4

Orifice Plate Thickness R 1/8 1/8 1/8 1/8 1/8 1/4 1/4 1/4

Approximate Weight(Pounds)

100 140 185 265 345 465 655 945

Size 2 3 4 6 8 10 12 14

Sizes 12" and 14" up to Class 900 contain "DVS" Seal Vulcanized to plate.

ANSI 300 ClassFLANGNEK - RAISED FACE

Catalog No. 013DS--Class 300 (740 P.S.I.G.) C.W.P.--Dual Seal

Size 2 3 4 6 8 10 12 14



B 5 1/4 5 1/2 6 1/4 6 15/16 6 15/16 8 3/16 8 7/8 9 3/8


End

C 5 1/4 5 1/2 5 5/8 6 15/16 6 15/16 7 3/16 7 7/8 9 3/8

Overall Face to Face D 10 5/8 11 1/8 12 14 14 15 1/2 17 19


F 12 7/8 13 3/4 14 1/8 15 1/2 16 1/2 17 3/8 18 7/8 20 1/8


G 4 1/4 5 3/8 5 7/8 7 8 9 10 3/4 11

Centerline to Bottom H 3 3/4 4 1/8 5 6 1/4 7 1/2 8 3/4 10 1/4 11 1/2



I1 5 9/16 6 1/16 7 9 11 13 1/8 15 17 9/16

Diameter of Flange J 6 1/2 8 1/4 10 12 1/2 15 17 1/2 20 1/2 23

Diameter of Bolt Circle K 5 6 5/8 7 1/8 10 5/8 13 15 1/4 17 3/4 20 1/4


L 3 5/8 5 6 3/16 8 1/2 10 5/8 12 3/4 15 16 1/4


Flange Thickness N 7/8 1 1/8 1 1/4 1 7/16 1 5/8 1 7/8 2 2 1/8


Flange)

8- 5/8 8- 3/4 8- 3/4 12- 3/4 12- 7/8 16-1 16-1 1/8 20-1 1/8


3 3 1/2 3 3/4 4 1/4 4 3/4 5 1/4 5 3/4 6


3 1/2 4 1/4 4 1/2 5 3/4 5 1/2 6 1/4 6 3/4 7


O 2.375 3.500 4.500 6.625 8.625 10.750 12.750 14.000




100 150 200 330 480 615 1110 1105

Size 2 3 4 6 8 10 12 14




Size 2 3 4 6 8 10 12 14



B 5 1/4 6 15/16 6 9/16 7 15/16 8 11/16 9 9 13/16 10 1/4


End

C 5 1/4 6 15/16 6 9/16 7 15/16 8 11/16 8 8 13/16 10 1/4

Overall Face to Face D 10 5/8 14 13 1/4 16 17 1/2 17 1/4 18 7/8 20 3/4


F 12 7/8 13 3/4 14 1/8 15 1/2 16 1/2 17 3/8 18 7/8 20 1/8


G 4 1/4 5 3/8 6 1/8 7 8 9 10 3/4 11

Centerline to Bottom H 3 3/4 4 1/8 5 3/8 7 8 1/4 10 11 11 7/8



I1 5 9/16 6 1/16 7 9 11 13 1/8 15 17 9/16

Diameter of Flange J 6 8 1/4 10 3/4 14 16 1/2 20 22 23 3/4

Diameter of Bolt Circle K 5 6 5/8 8 1/2 11 1/2 13 3/4 17 19 1/4 20 3/4


L 3.625 5.000 6.188 8.500 10.625 12.750 15.000 16.250


Flange Thickness N 1 1/4 1 1/2 1 3/4 2 1/8 2 7/16 2 3/4 2 7/8 3


Flange)

8- 5/8 8- 3/4 8- 7/8 12-1 12-1 1/8 16-1 1/4 20-1 1/4 20-1 3/8


--- --- --- --- --- --- --- ---


4 1/4 5 5 3/4 6 3/4 7 3/4 8 1/2 8 3/4 9 1/2


O 2.375 3.500 4.500 6.625 8.625 10.750 12.750 14.000




105 160 265 400 595 745 1215 1475

Size 2 3 4 6 8 10 12 14



Catalog No. 016TS--Class 900 (2220 P.S.I.G.) C.W.P.--Teflon Seal

Size 2 3 4 6 8 10 12 14

Diam. Internal Line Bore A ? ? ? ? ? ? ? ?


B 6 15/16 6 15/16 7 13/16 8 9/16 9 1/8 10 7/8 11 9/16 11 1/16


End

C 6 15/16 6 15/16 7 1/16 7 15/16 9 1/8 10 7/8 11 9/16 11 1/16

Overall Face to Face D 14 14 15 16 5/8 18 3/8 21 7/8 23 3/8 22 3/8


F 12 7/8 13 3/4 14 1/8 15 1/2 17 1/4 18 3/8 20 3/8 21


G 5 3/4 5 3/8 6 1/8 7 9 1/8 11 12 12 3/8

Centerline to Bottom H 4 1/4 4 3/4 5 3/4 7 1/2 9 1/4 10 3/4 12 12 13/16



I1 5 9/16 6 1/16 7 9 11 13 1/8 15 17 9/16

Diameter of Flange J 8 1/2 9 1/2 11 1/2 15 18 1/2 21 1/2 24 25 1/4

Diameter of Bolt Circle K 6 1/2 7 1/2 9 1/4 12 1/2 15 1/2 18 1/2 21 22


L 3.625 5.000 6.188 8.500 10.625 12.750 15.000 16.250


Flange Thickness N 1 3/4 1 3/4 2 2 7/16 2 3/4 3 3 3/8 3 5/8


Flange)

8- 7/8 8- 7/8 8-1 1/8 12-1 1/8 12-1 3/8 16-1 3/8 20-1 3/8 20-1 1/2


--- --- --- --- --- --- --- ---


5 3/4 5 3/4 6 3/4 7 3/4 8 3/4 9 1/4 10 11 1/4


O 2.375 3.500 4.500 6.625 8.625 10.750 12.750 14.000




205 215 300 490 1095 1555 1935 2115

Size 2 3 4 6 8 10 12 14

?To be specified by purchaser.Sizes 12" and 14" up to Class 900 contain "DVS" Seal Vulcanized to plate.



Size 2 3 4 6 8 10 12

Diam. Internal Line Bore A ? ? ? ? ? ? ?


B 6 15/16 8 3/16 8 3/8 10 3/4 11 25/32 12 3/8 13 5/16


End

C 6 15/16 7 11/16 7 7/8 10 3/16 11 7/32 12 3/8 13 5/16

Overall Face to Face D 14 16 16 3/8 21 1/16 23 1/8 24 7/8 26 7/8


F 12 7/8 13 3/4 15 16 17 1/4 18 3/8 20 1/4


G 5 3/4 5 5/8 6 1/2 7 3/4 9 3/4 11 12 3/8

Centerline to Bottom H 4 1/4 5 1/4 6 1/8 7 3/4 9 1/2 11 1/2 13 1/4

Centerline to Top I 13 3/4 14 7/8 16 1/8 19 1/8 22 1/8 26 28 1/4


I1 5 9/16 6 1/16 7 9 11 13 1/8 15

Diameter of Flange J 8 1/2 10 1/2 12 1/4 15 1/2 19 23 26 1/2

Diameter of Bolt Circle K 6 1/2 8 9 1/2 12 1/2 15 1/2 19 22 1/2


L 3.625 5.000 6.188 8.500 10.625 12.750 15.000

Height of Raised Face M 1/4 1/4 1/4 1/4 1/4 1/4 1/4

Flange Thickness N 1 3/4 2 1/8 2 3/8 3 1/2 3 7/8 4 1/2 5 1/8


Flange)

8- 7/8 8-1 1/8 8-1 1/4 12-1 3/8 12-1 5/8 12-1 7/8 16-2


5 3/4 7 7 3/4 10 1/4 11 1/2 13 1/4 14 3/4


O 2.375 3.500 4.500 6.625 8.625 10.750 12.750

Size of Drain Plugs P 1/2 1/2 3/4 3/4 3/4 3/4 3/4

Orifice Plate Thickness R 1/8 1/8 1/8 1/8 1/8 1/4 1/4


205 275 445 710 1240 1745 2805

Size 2 3 4 6 8 10 12

?To be specified by purchaser.



Size 2 3 4 6

Diam. Internal Line Bore A ? ? ? ?


B 8 5/8 9 9/16 10 1/2 12 1/2


End

C 8 5/8 9 9/16 10 1/2 12 1/2

Overall Face to Face D 17 3/8 19 1/4 21 1/8 25 1/8


F 15 1/8 15 1/8 16 1/4 17 1/2


G 7 1/4 7 1/4 7 3/4 9 1/2

Centerline to Bottom H 6 6 7 9 1/2

Centerline to Top I 16 7/8 16 7/8 17 19 1/8


I1 7 7 7 3/8 9

Diameter of Flange J 9 1/4 12 14 19

Diameter of Bolt Circle K 6 3/4 9 10 3/4 14 1/2


L 3.625 5.000 6.188 8.500

Height of Raised Face M 1/4 1/4 1/4 1/4

Flange Thickness N 2 1/4 2 7/8 3 1/4 4 1/2


Flange)

8-1 8-1 1/4 8-1 1/2 8-2


7 8 3/4 10 13 3/4


O 2.375 3.500 4.500 6.625

Size of Drain Plugs P 1/2 1/2 3/4 3/4

Orifice Plate Thickness R 1/8 1/8 1/8 1/8


520 575 715 1195

Size 2 3 4 6


ANSI 600 ClassFLANGNEK - RING JOINT


Size 2 3 4 6 8 10 12 14

A.P.I. Ring Number R-23 R-31 R-37 R-45 R-49 R-53 R-57 R-61



B 5 5/16 7 6 5/8 8 8 3/4 9 1/8 9 7/8 10 5/16


End

C 5 5/16 7 6 5/8 8 8 3/4 8 1/8 8 7/8 10 5/16

Overall Face to Face D 10 3/4 14 1/8 13 3/8 16 1/8 17 5/8 17 3/8 19 20 7/8


F 12 7/8 13 3/4 14 1/8 15 1/2 16 1/2 17 3/8 18 7/8 20 1/8


G 4 1/4 5 3/8 6 1/8 7 8 9 10 3/4 11 7/8




I1 5 9/16 6 1/16 7 9 11 13 1/8 15 17 9/16

Diameter of Flange J 6 1/2 8 1/4 10 3/4 14 16 1/2 20 22 23 3/4


Pitch Diameter of Ring andGroove

L2 3 1/4 4 7/8 5 7/8 8 5/16 10 5/8 12 3/4 15 16 1/2

Depth of Groove M1 5/16 5/16 5/16 5/16 5/16 5/16 5/16 5/16

Width of Groove M2 15/32 15/32 15/32 15/32 15/32 15/32 15/32 15/32

Flange Thickness N1 1 5/16 1 9/16 1 13/16 2 3/16 2 1/2 2 13/16 2 15/16 3 1/16

Number and Diameter ofBolt--Studs (Per Flange)

8- 5/8 8- 3/4 8- 7/8 12-1 12-1 1/8 16-1 1/4 12-1 1/4 20-1 3/8


4 1/2 5 1/4 6 7 8 8 3/4 9 9 3/4


O 2.375 3.500 4.500 6.625 8.625 10.750 12.750 14.000




105 160 265 400 595 745 1215 1475

Size 2 3 4 6 8 10 12 14




Size 2 3 4 6 8 10 12 14




B 7 7 7 7/8 8 5/8 9 3/16 10 7/8 11 5/8 11 1/16


End

C 7 7 7 1/8 8 9 3/16 10 7/8 11 5/8 11 1/4

Overall Face to Face D 14 1/8 14 1/8 15 1/8 16 3/4 18 1/2 22 23 1/2 22 9/16


F 12 7/8 13 3/4 14 1/8 15 1/2 17 1/4 18 3/8 20 3/8 21


G 5 3/4 5 3/8 6 1/8 7 9 1/8 11 12 1/4 12 1/8




I1 5 9/16 6 1/16 7 9 11 13 1/8 15 17 9/16




L2 3 3/4 4 7/8 5 7/8 8 5/16 10 5/8 12 3/4 15 16 1/2

Depth of Groove M1 5/16 5/16 5/16 5/16 5/16 5/16 5/16 7/16

Width of Groove M2 15/32 15/32 15/32 15/32 15/32 15/32 15/32 21/32



8- 7/8 8- 7/8 8-1 1/8 12-1 1/8 12-1 3/8 16-1 3/8 20-1 3/8 20-1 1/2


6 6 7 8 9 9 1/2 10 1/4 11 3/4


O 2.375 3.500 4.500 6.625 8.625 10.750 12.750 14.000




205 215 300 490 1095 1555 1935 2115

Size 2 3 4 6 8 10 12 14




Size 2 3 4 6 8 10 12

A.P.I. Ring Number R-24 R-35 R-39 R-46 R-50 R-54 R-58



B 7 8 1/4 8 7/16 10 7/8 11 31/32 12 9/16 13 5/8


End

C 7 7 3/4 7 15/16 10 5/16 11 13/32 12 9/16 13 5/8

Overall Face to Face D 14 1/8 16 1/8 16 1/2 21 9/16 23 1/2 25 1/4 27 1/2


F 12 7/8 13 3/4 15 16 1/8 17 1/4 18 3/8 20 1/4


G 5 3/4 5 5/8 6 1/2 7 3/4 9 3/4 11 12 3/8




I1 5 9/16 6 1/16 7 9 11 13 1/8 15




L2 3 3/4 5 3/8 6 3/8 8 5/16 10 5/8 12 3/4 15

Depth of Groove M1 5/16 5/16 5/16 3/8 7/16 7/16 9/16

Width of Groove M2 15/32 15/32 15/32 17/32 21/32 21/32 29/32

Flange Thickness N1 1 13/16 2 3/16 2 7/16 3 5/8 4 1/16 4 11/16 5 7/16


8- 7/8 8-1 1/8 8-1 1/4 12-1 3/8 12-1 5/8 12-1 7/8 16-2


6 7 1/4 8 10 1/2 12 13 3/4 15 1/4


O 2.375 3.500 4.500 6.625 8.625 10.750 12.750




205 275 445 710 1240 1745 2805

Size 2 3 4 6 8 10 12




Size 2 3 4 6

A.P.I. Ring Number R-26 R-32 R-38 R-47



B 8 11/16 9 11/16 10 11/16 12 3/4


End

C 8 11/16 9 11/16 10 11/16 12 3/4



F 15 1/8 15 1/8 16 1/4 17 1/2


G 7 1/4 7 1/4 7 3/4 9 1/2




I1 7 7 7 3/8 9




L2 4 5 6 3/16 9

Depth of Groove M1 5/16 3/8 7/16 1/2

Width of Groove M2 15/32 17/32 21/32 25/32

Flange Thickness N1 2 5/16 3 3 7/16 4 3/4


8-1 8-1 1/4 8-1 1/2 8-2


7 1/4 9 10 1/2 14 1/4


O 2.375 3.500 4.500 6.625




520 575 715 1195

Size 2 3 4 6


ANSI 150 ClassFLANGED - RAISED FACE

Catalog NO. 101DS--Class 150 (295 P.S.I.G.) C.W.P.--Dual Seal

Size 2 3 4 6 8 10 12 14



B 5 1/4 5 5/16 5 7/16 5 9/16 6 3/16 6 7/16 7 3/8 7 3/8


End

C 5 1/4 5 5/16 5 7/16 5 9/16 6 3/16 6 7/16 6 3/8 7 3/8

Overall Face to Face D 10 5/8 10 3/4 11 11 1/4 12 1/2 13 14 15


F 12 7/8 13 3/4 14 1/8 15 1/2 16 1/2 17 3/8 18 7/8 20 1/8


G 4 1/4 5 3/8 5 7/8 6 3/4 8 9 10 3/4 11

Centerline to Bottom H 3 3/4 4 4 1/2 5 1/2 6 3/4 8 9 1/2 10 1/2



I1 5 9/16 6 1/16 7 9 11 13 1/8 15 17 9/16

Diameter of Flange J 6 7 1/2 9 11 13 1/2 16 19 21

Diameter of Bolt Circle K 4 3/4 6 7 1/2 9 1/2 11 3/4 14 1/4 17 18 3/4


L 3 5/8 5 6 3/16 8 1/2 10 5/8 12 3/4 15 16 1/4


Flange Thickness N 3/4 15/16 15/16 1 1 1/8 1 3/16 1 1/4 1 3/8


Flange)

4- 5/8 4- 5/8 8- 5/8 8- 3/4 8- 3/4 12- 7/8 12- 7/8 12-1


2 3/4 3 3 3 1/4 3 1/2 3 3/4 4 4 1/4


3 1/4 3 3/4 3 3/4 4 4 1/4 4 3/4 4 3/4 5 1/2




105 150 245 285 375 510 720 1030

Size 2 3 4 6 8 10 12 14




Size 2 3 4 6 8 10 12 14



B 5 1/4 5 1/2 6 1/4 7 1/4 6 15/16 8 3/16 8 7/8 9 3/8


End

C 5 1/4 5 1/2 5 5/8 6 3/8 6 15/16 7 3/16 7 7/8 9 3/8

Overall Face to Face D 10 5/8 11 1/8 12 14 14 15 1/2 17 19


F 12 7/8 13 3/4 14 1/8 15 1/2 16 1/2 17 3/8 18 7/8 20 1/8


G 4 1/4 5 3/8 5 7/8 7 8 9 10 3/4 11

Centerline to Bottom H 3 3/4 4 1/8 5 6 1/4 7 1/2 8 3/4 10 1/4 11 1/2



I1 5 9/16 6 1/16 7 9 11 13 1/8 15 17 9/16

Diameter of Flange J 6 1/2 8 1/4 10 12 1/2 15 17 1/2 20 1/2 23

Diameter of Bolt Circle K 5 6 5/8 7 1/8 10 5/8 13 15 1/4 17 3/4 20 1/4


L 3 5/8 5 6 3/16 8 1/2 10 5/8 12 3/4 15 16 1/4


Flange Thickness N 7/8 1 1/8 1 1/4 1 7/16 1 5/8 1 7/8 2 2 1/8


Flange)

8- 5/8 8- 3/4 8- 3/4 12- 3/4 12- 7/8 16-1 16-1 1/8 20-1 1/8


3 3 1/2 3 3/4 4 1/4 4 3/4 5 1/4 5 3/4 6


3 1/2 4 1/4 4 1/2 5 5 1/2 6 1/4 6 3/4 7




110 165 220 370 540 695 1225 1270

Size 2 3 4 6 8 10 12 14




Size 2 3 4 6 8 10 12 14



B 5 1/4 6 15/16 6 9/16 7 15/16 8 11/16 9 1/16 9 13/16 10 1/4


End

C 5 1/4 6 15/16 6 9/16 7 15/16 8 11/16 8 1/16 8 13/16 10 1/4



F 12 7/8 13 3/4 14 1/8 15 1/2 16 1/2 17 3/8 18 7/8 20 1/8


G 4 1/4 5 3/8 6 1/8 7 8 9 10 3/4 11 7/8




I1 5 9/16 6 1/16 7 9 11 13 1/8 15 17 9/16

Diameter of Flange J 6 8 1/4 10 3/4 14 16 1/2 20 22 23 3/4



L 3.625 5.000 6.188 8.500 10.625 12.750 15.000 16.250


Flange Thickness N 1 1/4 1 1/2 1 3/4 2 1/8 2 7/16 2 3/4 2 7/8 3


Flange)

8- 5/8 8- 3/4 8- 7/8 12-1 12-1 1/8 16-1 1/4 20-1 1/4 20-1 3/8


--- --- --- --- --- --- --- ---


4 1/4 5 5 3/4 6 3/4 7 3/4 8 1/2 8 3/4 9 1/2




115 175 300 480 710 920 1430 1735

Size 2 3 4 6 8 10 12 14




Size 2 3 4 6 8 10 12 14



B 6 15/16 6 15/16 7 13/16 8 9/16 9 1/8 10 7/8 11 9/16 11 1/16


End

C 6 15/16 6 15/16 7 1/16 7 15/16 9 1/8 10 7/8 11 9/16 11 1/16



F 12 7/8 13 3/4 14 1/8 15 1/2 17 1/4 18 3/8 20 3/8 21


G 5 3/4 5 3/8 6 1/8 7 9 1/8 11 12 12 3/8




I1 5 9/16 6 1/16 7 9 11 13 1/8 15 17 9/16




L 3.625 5.000 6.188 8.500 10.625 12.750 15.000 16.750


Flange Thickness N 1 3/4 1 3/4 2 2 7/16 2 3/4 3 3 3/8 3 5/8


Flange)

8- 7/8 8- 7/8 8-1 1/8 12-1 1/8 12-1 3/8 16-1 3/8 20-1 3/8 20-1 1/2


--- --- --- --- --- --- --- ---


5 3/4 5 3/4 6 3/4 7 3/4 8 3/4 9 1/4 10 11 1/4




230 245 355 600 1265 1800 2260 2495

Size 2 3 4 6 8 10 12 14




Size 2 3 4 6 8 10 12



B 6 15/16 8 3/16 8 3/8 10 3/4 11 25/32 12 3/8 13 5/16


End

C 6 15/16 7 11/16 7 7/8 10 3/16 11 7/32 12 3/8 13 5/16



F 12 7/8 13 3/4 15 16 17 1/4 18 3/8 20 1/4


G 5 3/4 5 5/8 6 1/2 7 3/4 9 3/4 11 12 3/8




I1 5 9/16 6 1/16 7 9 11 13 1/8 15




L 3.625 5.000 6.188 8.500 10.625 12.750 15.000

Height of Raised Face M 1/4 1/4 1/4 1/4 1/4 1/4 1/4

Flange Thickness N 1 3/4 2 1/8 2 3/8 3 1/2 3 7/8 4 1/2 5 1/8


Flange)

8- 7/8 8-1 1/8 8-1 1/4 12-1 3/8 12-1 5/8 12-1 7/8 16-2


5 3/4 7 7 3/4 10 1/4 11 1/2 13 1/2 14 3/4




230 275 520 875 1500 2180 3470

Size 2 3 4 6 8 10 12




Size 2 3 4 6



B 8 5/8 9 9/16 10 1/2 12 1/2


End

C 8 5/8 9 9/16 10 1/2 12 1/2



F 15 1/8 15 1/8 16 1/4 17 1/2


G 7 1/4 7 1/4 7 3/4 9 1/2




I1 7 7 7 3/8 9




L 3.625 5.000 6.188 8.500

Height of Raised Face M 1/4 1/4 1/4 1/4

Flange Thickness N 2 1/4 2 7/8 3 1/4 4 1/2


Flange)

8-1 8-1 1/4 8-1 1/2 8-2


7 8 3/4 10 13 3/4




560 660 840 1520

Size 2 3 4 6


ANSI 600 ClassFLANGED - RING JOINT


Size 2 3 4 6 8 10 12 14




B 5 5/16 7 6 5/8 8 8 3/4 9 1/8 9 7/8 10 5/16


End

C 5 5/16 7 6 5/8 8 8 3/4 8 1/8 8 7/8 10 5/16

Overall Face to Face D 10 3/4 14 1/8 13 3/8 16 1/8 17 5/8 17 3/8 19 20 7/8


F 12 7/8 13 3/4 14 1/8 15 1/2 16 1/2 17 3/8 18 7/8 20 1/8


G 4 1/4 5 3/8 6 1/8 7 8 9 10 3/4 11 7/8




I1 5 9/16 6 1/16 7 9 11 13 1/8 15 17 9/16

Diameter of Flange J 6 1/2 8 1/4 10 3/4 14 16 1/2 20 22 23 3/4



L2 3 1/4 4 7/8 5 7/8 8 5/16 10 5/8 12 3/4 15 16 1/2

Depth of Groove M1 5/16 5/16 5/16 5/16 5/16 5/16 5/16 5/16

Width of Groove M2 15/32 15/32 15/32 15/32 15/32 15/32 15/32 15/32



8- 5/8 8- 3/4 8- 7/8 12-1 12-1 1/8 16-1 1/4 12-1 1/4 20-1 3/8


4 1/2 5 1/4 6 7 8 8 3/4 9 9 3/4




115 175 300 480 710 920 1430 1735

Size 2 3 4 6 8 10 12 14




Size 2 3 4 6 8 10 12 14




B 7 7 7 7/8 8 5/8 9 3/16 10 7/8 11 5/8 12 15/16


End

C 7 7 7 1/8 8 9 3/16 10 7/8 11 5/8 12 15/16

Overall Face to Face D 14 1/8 14 1/8 15 1/8 16 3/4 18 1/2 22 23 1/2 26 1/8


F 12 7/8 13 3/4 14 1/8 15 1/2 17 1/4 18 3/8 20 3/8 21


G 5 3/4 5 3/8 6 1/8 7 9 1/8 11 12 1/4 12 1/8




I1 5 9/16 6 1/16 7 9 11 13 1/8 15 17 9/16




L2 3 3/4 4 7/8 5 7/8 8 5/16 10 5/8 12 3/4 15 16 1/2

Depth of Groove M1 5/16 5/16 5/16 5/16 5/16 5/16 5/16 7/16

Width of Groove M2 15/32 15/32 15/32 15/32 15/32 15/32 15/32 21/32



8- 7/8 8- 7/8 8-1 1/8 12-1 1/8 12-1 3/8 16-1 3/8 20 1 3/8 20-1 1/2


6 6 7 8 9 9 1/2 10 1/4 11 3/4




230 245 355 600 1265 1800 2260 2495

Size 2 3 4 6 8 10 12 14




Size 2 3 4 6 8 10 12

A.P.I. Ring Number R-24 R-35 R-39 R-46 R-50 R-54 R-58



B 7 8 1/4 8 7/16 10 7/8 11 31/32 12 9/16 13 5/8


End

C 7 7 3/4 7 15/16 10 5/16 11 13/32 12 9/16 13 5/8

Overall Face to Face D 14 1/8 16 1/8 16 1/2 21 5/16 23 1/2 25 1/4 27 1/2


F 12 7/8 13 3/4 15 16 1/8 17 1/4 18 3/8 20 1/4


G 5 3/4 5 5/8 6 1/2 7 3/4 9 3/4 11 12 3/8




I1 5 9/16 6 1/16 7 9 11 13 1/8 15




L2 3 3/4 5 3/8 6 3/8 8 5/16 10 5/8 12 3/4 15

Depth of Groove M1 5/16 5/16 5/16 3/8 7/16 7/16 9/16

Width of Groove M2 15/32 15/32 15/32 17/32 21/32 21/32 29/32

Flange Thickness N1 1 5/16 2 3/16 2 7/16 3 5/8 4 1/16 4 11/16 5 7/16


8- 7/8 8-1 1/8 8-1 1/4 12-1 3/8 12-1 5/8 12-1 7/8 16-2


6 7 1/4 8 10 1/2 12 13 3/4 15 1/4




230 325 520 875 1500 2180 3470

Size 2 3 4 6 8 10 12




Size 2 3 4 6

A.P.I. Ring Number R-26 R-32 R-38 R-47



B 8 11/16 9 11/16 10 11/16 12 3/4


End

C 8 11/16 9 11/16 10 11/16 12 3/4



F 15 1/8 15 1/8 16 1/4 17 1/2


G 7 1/4 7 1/4 7 3/4 9 1/2




I1 7 7 7 3/8 9




L2 4 5 6 3/16 9

Depth of Groove M1 5/16 3/8 7/16 1/2

Width of Groove M2 15/32 17/32 21/32 25/32

Flange Thickness N1 2 5/16 3 3 7/16 4 3/4


8-1 8-1 1/4 8-1 1/2 8-2


7 1/4 9 10 1/2 14 1/4




560 660 840 1520

Size 2 3 4 6


ANSI 600 ClassWELDING NECK


Size 2 3 4 6 8 10 12 14



B 5 1/4 6 15/16 7 3/16 7 15/16 8 11/16 9 9 13/16 10 1/4


End

C 5 1/4 6 15/16 7 3/16 7 15/16 8 11/16 8 8 13/16 10 1/4



F 12 7/8 13 3/4 14 1/8 15 1/2 16 1/2 17 3/8 18 7/8 20 1/8


G 4 1/4 5 3/8 6 1/8 7 8 9 10 3/8 11 7/8




I1 5 9/16 6 1/16 7 9 11 13 1/8 15 17 9/16


O 2.375 3.500 4.500 6.625 8.625 10.750 12.750 14.000




95 145 230 320 480 570 1000 1215

Size 2 3 4 6 8 10 12 14




Size 2 3 4 6 8 10 12 14



B 6 15/16 6 15/16 7 13/16 8 9/16 9 1/8 10 13/16 11 9/16 11 1/16


End

C 6 15/16 6 15/16 7 1/16 7 13/16 9 1/8 10 13/16 11 9/16 11 1/16



F 12 7/8 13 3/4 14 1/8 15 1/2 17 1/4 18 3/8 20 3/8 21


G 5 3/4 5 3/8 6 1/8 7 9 1/8 11 12 1/4 12 3/8




I1 5 9/16 6 1/16 7 9 11 13 1/8 15 17 9/16


O 2.375 3.500 4.500 6.625 8.625 10.750 12.750 14.000




180 185 245 380 925 1310 1610 1735

Size 2 3 4 6 8 10 12 ?14




Size 2 3 4 6 8 10 12



B 6 15/16 8 3/16 8 3/8 10 3/4 11 25/32 12 3/8 13 5/16


End

C 6 15/16 7 11/16 7 7/8 10 3/16 11 7/32 12 3/8 13 5/16



F 12 7/8 13 3/4 15 16 17 1/4 18 3/8 20 1/4


G 5 3/4 5 5/8 6 1/2 7 3/4 9 3/4 11 12 3/8




I1 5 9/16 6 1/16 7 9 11 13 1/8 15


O 2.375 3.500 4.500 6.625 8.625 10.750 12.750




180 225 370 545 980 1310 2140

Size 2 3 4 6 8 10 12




Size 2 3 4 6



B 8 5/8 9 9/16 10 1/2 12 1/2


End

C 8 5/8 9 9/16 10 1/2 12 1/2



F 15 1/8 15 1/2 16 1/4 17 1/2


G 7 1/4 7 1/4 7 3/4 9 1/2




I1 7 7 7 3/8 9


O 2.375 3.500 4.500 6.625




480 490 590 870

Size 2 3 4 6


Sizes 2"-14", ANSI Classes 150, 300, 600 & 900

?NOTE: Fittings manufactured after July 1986 use these stuffing box and bearing plug parts. The parts are interchangeable in prior dated fittings, but may require minorfield modification (shortening) of the sleeves only.

ALL PARTS ON DANIEL SENIOR ORIFICE FITTING MAY BE REPLACED OR REPAIRED WITHOUT REMOVING FITTING FROM THE LINE.

PARTS AND MATERIALS NUMBER REQUIRED

SIZE

Part No. DESCRIPTION MATERIAL 2" 3" 4" 6" 8" 10" 12" 14"

1* Equalizer Valve(Complete)

1G* Stem 316 StainlessSteel

1 1 1 1 1 1 1 1

1H* Packing Nut CS (CP) 1 1 1 1 1 1 1 1

1D* Ball Chrome-Steel 1 1 1 1 1 1 1 1

1K* Packing Washer 316 StainlessSteel

1 1 1 1 1 1 1 1

1J* Packing Ring Teflon 2 2 2 2 2 2 2 2

2* OperatingWrench

Ductile Iron 1 1 1 1 1 1 1 1

3 Slide Valve Strip Type 410Stainless Steel

1 1 1 1 1 1 1 1

4 Body Cast CarbonSteel(Class 150, 300,600, 900)

1 1 1 1 1 1 1 1

5 Slide Valve GearShaft

CS (CP) 1 1 1 1 1 1 1 1

5A* Slide ValveIndicator Plate

Cast Aluminum 1 1 1 1 1 1 1 1

5B* Slide ValveIndicator Pointer

Stainless Steel 1 1 1 1 1 1 1 1

6 Lower PlateCarrier GearShaft

CS (CP) 1 1 1 1 1 1 1 1

7 Upper PlateCarrier GearShaft

CS (CP) 1 1 1 1 1 1 1 1

8DM Plate Carrier CS (CP) 1 1 1 1 1

316 SS 1 1 1

8E Orifice PlateSealing UnitClass 150-600

Nitrile(Removeable)

1 1 1 1 1 1 --- ---

12" up--NitrileBonded to BothSides of OrificePlate

1 1

8TS Orifice PlateSealing Unit(Complete):Class 150-2500Alternate SealsAvail.SeeCatalog--#500

Teflon 1 1 1 1 1 1 1 1

9 Sealing Bar CS (CP) 1 1 1 1 1 1 1 1

9A Sealing BarGasket

GraphiteAsbestos

1 1 1 1 1 1 1 1

10B* (1) Bleeder Valve(Complete):

10C* Body CS (CP) 1 1 1 1 1 1 1 1

10D* Needle 316 StainlessSteel

1 1 1 1 1 1 1 1

10E* "O" Ring Synthetic Rubber 1 1 1 1 1 1 1 1

10G* Set Screw Alloy Steel 1 1 1 1 1 1 1 1

11* Clamping BarScrew

Alloy Steel CL150 to 600

4 4 5 6 7 8 10 11

Alloy Steel CL900

4 4 5 6 8 8 10 22

12 Clamping Bar CS (CP) 1 1 1 1 1 1 1 1

13 Orifice Plate Type 304 or 316Stainless Steel

1 1 1 1 1 1 1 1

14 Top Cast CarbonSteel(Class 150, 300,600, 900)

1 1 1 1 1 1 1 1

15* Slide ValveSprings

316 StainlessSteel

4 4 4 6 6 6 7 8

16* Slide ValveCarrier Guide

316 StainlessSteel

2 2 2 2 2 2 2 2

17 Slide ValveCarrier

Carbon Steel 1 1 1 1 1 1 1 1

17A* Slide ValveCarrier Stop Pin

Carbon Steel(CP)

2 2 2 2 2 2 2 2

18 Slide Valve Seat Alloy Iron 1 1 1 1 1 1** 1** 1**

18A Slide Valve Seat& Top Gskt

GraphiteAsbestos

1 1 1 1 1 1 1 1

18B* Slide Valve SeatScrew

Alloy SteelPhosphateCoated

8 10 11 14 16 18 20 24

19 Bearing Plug(Upper)

CS (CP) 1 1 1 1 1 1 1 1

20* Stuffing Box(Upper)

CS (CP) 1 1 1 1 1 1 1 1

21 Stuffing Box(Lower)

CS (CP) 2 2 2 2 2 2 2 2

22 Bearing Plug(Lower)

CS (CP) 2 2 2 2 2 2 2 2

22A* Bearing Plug &Stuffing BoxGasket

Stainless Steel 6 6 6 6 6 6 6 6

23* Grease Gun(Complete)

CS (CP) 1 1 1 1 1 1 1 1

23A* Grease GunStem

CS (CP) 1 1 1 1 1 1 1 1

23B* Grease GunBody

CS (CP) 1 1 1 1 1 1 1 1

24* Grease SealDouble BallCheck Valve

316 StainlessSteel withChrome-SteelBalls

1 1 1 1 1 1 1 1

25* Packing Nut CS (CP) 3 3 3 3 3 3 3 3

25A* Packing Ring Teflon Varies with Size of Fittingand Pressure Rating

25B* Bearing Plug andStuffing BoxCentering Ring

Teflon 15 15 15 15 15 15 15 15

26* Stuffing BoxGland

316 StainlessSteel

3 3 3 3 3 3 3 3

28A* Packing Bushingand Retainer

316 StainlessSteel

3 3 3 3 3 3 3 3

30* Drain Valve Plug CS (CP) 2 2 2 2 2 2 2 2

31* 1/2" NPT Plugfor PressureMeter Tap

CS (ChemicallyTreated)

4 4 4 4 4 4 4 4

32 Hex. Nut CS -- Class 150to 600 Incl.

14 15 15 18 19 22 22 24

CS -- Class 900 14 15 15 18 20 22 22 24

33 Stud Alloy Steel CL150 to 600 Incl.

14 15 15 18 19 22 22 24

Alloy Steel CL900

14 15 15 18 20 22 22 24

34* Bearing PlugBody (Upper)

CS (CP) 1 1 1 1 1 1 1 1

35* Bearing PlugBody (Lower)

CS (CP) 2 2 2 2 2 2 2 2

36* Stuffing BoxBody (Upper)

CS (CP) 1 1 1 1 1 1 1 1

37* Stuffing BoxBody (Lower)

CS (CP) 2 2 2 2 2 2 2 2

38 Bearing PlugSleeve (Upper)

CS (CP) 1 1 1 1 1 1 1 1

39 Bearing PlugSleeve (Lower)

CS (CP) 2 2 2 2 2 2 2 2

40 Stuffing BoxSleeve (Upper)

CS (CP) 1 1 1 1 1 1 1 1

41 Stuffing BoxSleeve (Lower)

CS (CP) 2 2 2 2 2 2 2 2

25* Packing Nut CS (CP) 3 3 3 3 3 3 3 3

25A* Packing Ring Teflon 3/8" Thick 9 9 9 9 9 9 9 9

25B* Centering Ring Teflon 3/16"Thick

9 9 9 9 9 9 9 9

26* Stuffing BoxGland

316 S.S. 3 3 3 3 3 3 3 3

*Indicates Part Interchangeable in 2 inch thru 14 inch sizes.**10", 12" and 14" Class 900 are Cast Stainless Steel

NOTE: Available in other materials upon specification. CS (Carbon Steel), CP (Cadmium Plated)Various Part Materials are changed for "AASG" Trim Fittings

IN ORDERING PARTS, PLEASE SPECIFY:

Catalog number1. Size2. Serial number and date of the original purchase3. Part number4. Material5. Quantity of parts required.6.

(1)When venting upper chamber through bleeder valve (#10B), direct fluid to a safe area using the threaded connection at the valve discharge port.

Sizes 2"-12", ANSI Class 1500 & Sizes 2"-6", Class 2500

?NOTE: Fittings manufactured after July 1986 use these stuffing box and bearing plug parts. The parts are interchangeable in prior dated fittings, but may requireminor field modification (shortening) of the sleeves only.

ALL PARTS ON DANIEL SENIOR ORIFICE FITTING MAY BE REPLACED OR REPAIRED WITHOUT REMOVING FITTING FROM THE LINE.

PARTS AND MATERIALS NUMBER REQUIRED

SIZE

Part No. DESCRIPTION MATERIAL 2" 3" 4" 6" 8" 10" 12"

1* Equalizer Valve(Complete)

1G* Stem 316 Stainless Steel 1 1 1 1 1 1 1

1H* Packing Nut CS (CP) 1 1 1 1 1 1 1

1D* Ball Chrome-Steel 1 1 1 1 1 1 1

1K* Packing Washer 316 Stainless Steel 1 1 1 1 1 1 1

1J* Packing Ring Teflon 2 2 2 2 2 2 2

2* Operating Wrench Ductile Iron 1 1 1 1 1 1 1

3 Slide Valve Strip Stainless Steel 1 1 1 1 1 1 1

4 Body Cast Carbon Steel 1 1 1 1 1 1 1

5 Slide Valve Gear Shaft CS (CP) 1 1 1 1 1 1 1

5A* Slide Valve Indicator Plate Cast Aluminum 1 1 1 1 1 1 1

5B* Slide Valve IndicatorPointer

Stainless Steel 1 1 1 1 1 1 1

6 Lower Plate Carrier GearShaft

CS (CP) 1 1 1 1 1 1 1

7 Upper Plate Carrier GearShaft

CS (CP) 1 1 1 1 1 1 1

8DM Plate Carrier CL 1500 - 316 StainlessSteel

1 1 1

CL 1500 - CS (CP) 1 1 1 1

CS 2500 - CS (CP) 1 1 1 1

8TS Orifice Plate Sealing Unit(Without Orifice Plate)

Teflon 1 1 1 1 1 1 1

9HP Sealing Bar CS (CP) 1 1 1 1 1 1 1

9A Sealing Bar Gasket Synthetic Composition 1 1

9CF "Compoflex" Sealing BarGasket

Synthetic Composition 1 1 1 1 1

10B* (1) Bleeder Valve (Complete): CS (CP)

10C* Body CS (CP) 1 1 1 1 1 1 1

10D* Needle 316 Stainless Steel 1 1 1 1 1 1 1

10E* "O" Ring Synthetic Rubber 1 1 1 1 1 1 1

10G* Set Screw Alloy Steel 1 1 1 1 1 1 1

11* Clamping Bar Screw Alloy Steel -- CL 1500 (CP) 10 10 12 14 16 16 20

Alloy Steel -- CL 2500 (CP) 10 10 12 14

12HP Clamping Bar CS (CP) 1 1 1 1 1 1 1

13 Orifice Plate Type 304 or 316 StainlessSteel

1 1 1 1 1 1 1

14 Top Cast Carbon Steel 1 1 1 1 1 1 1

14CF Body-Top "O" Ring Special CompoundSynthetic Rubber CL 1500

1 1 1 1 1

14CF-C Body-Top Gasket(Male-Female Joint)Not Illustrated

Parker Seal SyntheticRubber Gasket CL 2500

1 1 1 1

15* Slide Valve Springs 316 Stainless Steel 4 4 4 6 6 6 7

16* Slide Valve Carrier Guide 316 Stainless Steel 2 2 2 2 2 2 2

17 Slide Valve Carrier Carbon Steel 1 1 1 1 1 1 1

17A* Slide Valve Carrier StopPin

Carbon Steel (CP) 2 2 2 2 2 2 2

18 Slide Valve Seat Stainless Steel 1 1 1 1 1 1 1

18A Slide Valve Seat Gasket Synthetic Comp. - CL 1500 1 1 1 1 1

Synthetic Comp. - CL 2500 1 1 1 1

Slide Valve Seat/TopGasket (Not Illustrated)

Synthetic Comp. - CL 1500 1 1

18B* Slide Valve Seat Screw Alloy Steel CL 1500 PhosCoat

8 10 11 14 16 18 20

Alloy Steel CL 2500 PhosCoat

10 10 11 14

19 Bearing Plug (Upper) CS CL 1500 (CP) 1 1 1 1 1 1 1

19HP Bearing Plug (Upper) CS CL 2500 (CP) 1 1 1 1

20 Stuffing Box (Upper) CS CL 1500 (CP) 1 1 1 1 1 1 1

20HP Stuffing Box (Upper) CS CL 2500 (CP) 1 1 1 1

21 Stuffing Box (Lower) CS CL 1500 (CP) 2 2 2 2 2 2 2

21HP Stuffing Box (Lower) CS CL 2500 (CP) 2 2 2 2

22 Bearing Plug (Lower) CS CL 1500 (CP) 2 2 2 2 2 2 2

22HP Bearing Plug (Lower) CS CL 2500 (CP) 2 2 2 2

22A* Bearing Plug & StuffingBox Gasket

316 Stainless Steel CL1500

6 6 6 6 6 6 6

22A-HP* Bearing Plug & StuffingBox Gasket


6 6 6 6

22B* Bearing Plug & StuffingBox O-Ring Seal

Synthetic Rubber CL 2500 6 6 6 6

23* Grease Gun (Complete) CS (CP) 1 1 1 1 1 1 1

24* Grease Seal Double BallCheck Valve

316 Stainless Steel withChrome-Steel Balls

1 1 1 1 1 1 1

25* Packing Nut CS CL 1500 (CP) 3 3 3 3 3 3 3

25HP* Packing Nut CS CL 2500 (CP) 3 3 3 3

25A* Packing Ring Teflon CL 1500 Varies with Size of Fittingand Pressure Rating25A-HP* Packing Ring Teflon CL 2500

25B* Bearing Plug CenteringRing

Teflon CL 1500 & 2500 9 9 9 9 9 9 9

25B* Stuffing Box CenteringRing

Teflon CL 1500 6 6 6 6 6 6 6

25B-HP* Stuffing Box CenteringRing

Teflon CL 2500 6 6 6 6 6 6 6

26* Stuffing Box Gland 316 Stainless Steel CL1500

3 3 3 3 3 3 3

26B* External Stuffing BoxGland with "O" RingGroove


3 3 3 3

26E* Internal Stuffing Box Glandwith "O" Ring Groove


3 3 3 3

26C* "O" Ring Synthetic Rubber CL 2500 3 3 3 3

26D* "O" Ring Synthetic Rubber CL 2500 6 6 6 6

28A* Packing Bushing andRetainer

Stainless Steel CL 1500 3 3 3 3 3 3 3

30* Drain Valve Plug CS 2 2 2 2 2 2 2

31* 1/2" NPT Plug forPressure Meter Tap

CS 4 4 4 4 4 4 4

32 Hex. Nut CS -- Class 1500 14 14 16 18 18 22 22

CS -- Class 2500 16 16 16 18

33 Stud Alloy Steel -- CL 1500 14 14 16 18 18 22 22

Alloy Steel -- CL 2500 16 16 16 18

POST JULY 1986 CL 1500STUFFING BOX AND BEARING PLUG:

34* Bearing Plug Body (Upper) CS (CP) 1 1 1 1 1 1 1

35* Bearing Plug Body (Lower) CS (CP) 2 2 2 2 2 2 2

36* Stuffing Box Body (Upper) CS (CP) 1 1 1 1 1 1 1

37* Stuffing Box Body (Lower) CS (CP) 2 2 2 2 2 2 2

38 Bearing Plug Sleeve(Upper)

CS (CP) 1 1 1 1 1 1 1

39 Bearing Plug Sleeve(Lower)

CS (CP) 2 2 2 2 2 2 2

40 Stuffing Box Sleeve(Upper)

CS (CP) 1 1 1 1 1 1 1

41 Stuffing Box Sleeve(Lower)

CS (CP) 2 2 2 2 2 2 2

25* Packing Nut CS (CP) 3 3 3 3 3 3 3

25A* Packing Ring Teflon 3/8" Thick 9 9 9 9 9 9 9

25B* Centering Ring Teflon 3/16" Thick 9 9 9 9 9 9 9

26* Packing Gland 316 S.S. 3 3 3 3 3 3 3

*Indicates Part Interchangeable in 2 inch thru 12 inch sizes.CS (Carbon Steel), CP (Cadmium Plated).NOTE: Some Materials changed for "AASG" Trim. Other Materials available upon specification.

IN ORDERING PARTS, PLEASE SPECIFY:

Catalog number1. Size2. Serial number and date of the original purchase3. Part number4. Material5. Quantity of parts required.6.

(1)When venting upper chamber through bleeder valve (#10B), direct fluid to a safe area using the threaded connection at the valve discharge port.

Documents

BRO_Senior Orifice Fitting Cat100_EN