Upload
dinhduong
View
215
Download
0
Embed Size (px)
Citation preview
OverviewMRV is the leader of Free Space Optics (FSO or Optical Wireless) by means of its TereScope® product line, an opticalwireless system for data, voice and video transmission system. The MRV TereScope® systems provide the most compre-hensive FSO wireless solutions, ranging from short to long distances and narrow to ultra-high bandwidth.
TereScope® provides ultra high bandwidth using a technology similar to that found in fiber optics communications, pro-viding full-wire data rate using optical signals. In addition, the narrow and invisible laser beam makes it the most secure wireless solution, nearly impossible to intercept. TereScope systems, without the need for right-of-way or government permits for installation, provide a license-free technology.
Providing high-speed fiber-speed with wireless flexibility The TereScope® family of Free-Space Optics (FSO) products provides cost-effective, high-speed wireless connectivity for a variety of applications, such as: Enterprise connectivity, Voice & Data, Video and Entertainment, Telco Bypass, Disaster Recovery, Surveillance and Government, Backhaul for wireless mesh. Whether you need narrowband voice and/or broadband data, our products provide scalable, wireless solutions at fiber-speed. Operating at data rates of 1 Mbps to 10 Gigabit speeds, TereScope® systems’ deployment is fast, without requiring right-of-way or government permits for installation, providing you with flexible high bandwidth, secure communication. Whether you are a Service Provider or an Enterprise customer, the TereScope® family of products can provide you with the data rate, performance and reliability that you need in a communications network.
The Free Space Optics Advantage
Ultra High Wireless Bandwidth The components used in FSO technology are similar to those found in fiber optic system. Therefore, FSO gives you the high data rates previously provided only by fiber optics.
Most Secure Wireless TransmissionThe beam that transmits your data is very narrow and invisible, making it nearly impossible to intercept.
License free operation No need to obtain frequency licenses for the operators of TereScope® FSO wireless solutions
TereScopeSeries
The Most Comprehensive Free Space Optics Wireless Solution
www.mrv.com Contact: [email protected]
®
Versatile Protocol Compatible for better investment protection FSO links work with a variety of protocols. Protocols such as Ethernet, Fast Ethernet, Gigabit Ethernet, FDDI, ATM, and ESCON can all be transmitted through TereScope® without issue. Using an industry standard network interfaces and a clear upgrade path for higher bandwidth protects your investment in MRV TereScope® solutions.
Safe to Use All TereScope® systems are eye and skin safe at the aperture and meet all the safety standards – includingthe IEC60825-1 Class 1M standard.
Major Cost Savings With TereScope links, you own your bandwidth. Avoiding the recurring costs of leased lines and licensing costs, your return on investment can be realized in just a few months
MRV’s TereScope® - Free Space Optics (FSO) solutions Integrated End-to-End solution Backed by over twenty years of research and development in the field of Free Space Optics and networking, MRV is the market leader in FSO technology. We have over 8000 links deployed worldwide granting us more experience in selling, installing and servicing this equipment than any other FSO vendor. In addition to incorporating all of the FSO advantages, our TereScope® systems offer unique integration of end-to-end networking solution (using MRV Ethernet solutions) and patented features including: - Multiple transmitters to reduce scintillation, based on matrix transmission - All-optics FSO - TereScope 1 (PAL) systems are all-optical, free of electronics and do not require any power source to provide optical wireless solutions - An RF backup system (Fusion) for a number of the TereScope products, offering carrier-class availability (99.999%) in all types of weather, including heavy fog and rain - End-to-End Management by MegaVision®, MRV’s SNMP manager, or any commercially available SNMP browser
Performance – Ultra High Bandwidth The high-end TereScope® series provides for 1 Mbps to 10 Gbps wire-speed connectivity for distances of up to 6.7 km.
Reliable Communication Multiple transmit apertures technology: The TereScope® products use a multiple transmit apertures technology to ensure high performance under adverse weather conditions. The receivers are designed to overcome scintillation and other atmospheric noises in hot or cold weather.
High MTBF: All TereScope® systems are extremely reliable with an MTBF (Mean Time Between Failures) of more than 10 years.Heating: All our midrange systems are equipped with our special internal air circulation feature, based on dissipation of the power supply heat. This prevents the formation of condensation on the lenses under all weather conditions with-out the need for additional heating at low temperatures
Notwithstanding the above, when the internal heating and ventilation mechanism of the TereScope systems is not enough due to adverse weather conditions, such as heavy snow accompanied by strong wind or in places with high humidity the TereScope systems can be ordered with the additional heating.
For the TS5000 and TS4000 models the heating mechanism includes the front window with the implanted thin heating element and a circuit controlling the heating in accordance with the outside temperature and the humidity (P.N: TSX000-HEAT).For the TS700 or TS800 models the heating mechanism includes the heating elements between the lens and the front window, which stream the heating towards the optical components in order to prevent condensation and to heat the window to prevent snow accumulation on the front window (P.N: TSX00-HEAT).At the moment there is no heating option for the TS2000 models.
Gigabit EthernetFast EthernetSMPTE
10 Gigabit EthernetEthernet4E1/4T1
E1/T1ATM
secure optical wireless OC3/STM-1OC1STM-4
FSO Chaining for non-line-offset and higher distance communications The chaining of TereScope® FSO is required when the two sites are connected by more than one link using at least one additional building as a mid-point.
When is the Chaining required? The chaining of TereScope® links is required in the following cases: a) When there is no direct line of sight between the sites; b) When the distance between the sites is too long; c) When the distance between the sites is reachable with one link but the customer wants much more Power Budget for a higher reliability.
Backup Radio: Maximizing link availability under all weather conditionsThe TereScope® Fusion was designed to combine the best features of two transport media: laser light and radio waves, to form a single, seamless, wireless communication link between network devices. By leveraging both technologies, we can provide the 99.999% availability that your network requires.The TereScope® Fusion has been specifically constructed to maximize link availability between network nodes. These sys-tems use the internationally unlicensed 2.4 GHz or 5.5 GHz ISM band and are used as a backup for a number of TereScope systems.TereScope Fusion systems have an optical wireless link that provides Fast Ethernet connectivity as the primary link and Ethernet RF as the backup link. These systems operate under most weather conditions, including heavy rain, snow and fog, to nearly 100% link availability. Ease of installation and freedom from licensing make these systems very simple to deploy. The Fusion built-in option exists for the TS5000, TS4000 and TS800 series. Add-on Fusion exist for the other models.
SafetyAll TereScope® models are eye and skin safe at the aperture and comply with eye safety Class 1M.The PoE technology allows to safely transfer electrical power to the TereScope system over the data cable. All the fol-lowing TereScope models having the copper interface support the PoE (Power over Ethernet) technology: TS700/100, TS800/100, TS2000/100, TS4000/100 and TS5000/100. The first three models meet the requirements of the international standard IEEE802.3 2008 and their maximum power consumption is 15W. The two other models have the PoE feature with the consumption up to 27W. In order to benefit from this PoE feature these models should be ordered in the low voltage version (V13, F13, V3 or F3).
Network Management The new generation of TereScopes systems, including the TS700 series is equipped with the management hardware. Most of the products include the Extended SNMP software version License. Though some of the systems do not have any license or the Basic version only, upgrading can be carried out at any time or at any place by means of the License key, which will be sent to the client. SNMP monitoring can be done as usual via MRV’s SNMP MegaVision Web software or via TereScope’s SNMP Management web-based interface (using for example Internet Explorer, Firefox, etc.), or any other standard SNMP Platform.
Dry Contacts: The TereScope® systems can be equipped with a dry contact option that enables interfacing to dry con-tacts based local and remote management and monitoring systems.
End-to-End Networking The unique integration of high bandwidth with most secure FSO technology and end-to-end Ethernet/IP switches and routers enables the deployment of multi-site connectivity with in-building OptiSwitch Ethernet solutions and outdoor TereScope wireless connectivity with end-to-end MegaVision® Pro NMS integrated management.
TereScope® - The Most Comprehensive Free Space Optics Wireless solution
Features:- Alignment using both visual feedback and received power indicators- Fast deployment- License-free operation- Remote management options- Weatherproofing: IP66- Secure transmission- Eye safety Class 1M- Chain multiple connections
Applications:- Enterprise connectivity- Mesh networking- Voice & video connections - Video & entertainment- Carrier bypass - Surveillance- Government- Temporary installation- Cross border links- Healthcare - Fiber backup - Business continuity
TereScope - One versatile technology for a full complement of communication solutions
TereScope® TS10GE - 10 Gigabit Connectivity
Going the fastest with modular design
The line-of-sight TereScope 10GE, the industry’s first wireless 10 Gigabit Ethernet Free Space Optics system, provides enterprises and service providers with a cost-effective and high-bandwidth wireless solution for extending backbone networks between multiple buildings without a need for rights-of-way or a fiber-optic cable plant. The TereScope® TS10GE provides ultra high-speed Free Space Optics (FSO) connectivity. Operating at data rates of 10 Gigabit, TereScope® TS10GE systems are deployable rapidly, providing maximum bandwidth FSO optical wireless connectivity.
In the near future, it is foreseen that most of the enterprises’ networks’ backbone will consist of 10GE switches. For connecting the various buildings on a multi-site campus, or Optical Metro Ethernet GE drops to the customer where no fiber is available, practical, or cost-effective, the TS10GE FSO link offers a wireless 10GE solution.
The TS10GE is a high quality product designed for short distance connections of up to 350 m. The TS10GE is a transparent link, supporting all 10 Gigabit protocols supported by XFP modules.
Easy to install and set up, the system includes an independent weatherproof enclosure for the electronics, that can be installed as part of an integral system attached to the optics, or separately on an adjacent wall or ledge, allowing maximum flexibility in installation. The electronics are fully modular, enabling convenient repair, maintenance, and upgrades. Included are a modular power supply, interface, EDFA optical amplifier, and SNMP management modules in a miniature rack. The network interface is a standard pluggable XFP module, allowing modifications to wavelength in the field if needed.
Features
- Accommodates 10 Gigabit networks, for protocols such as 10 Gigabit Ethernet, STM64/OC-192, with or without FEC, etc.
- Distances up to 350 m
- SNMP Module
- Built-in dry contacts
- Modular network connectivity (XFP interface)
- Modular Power Supply
Part number TS10GE/XYL/SHSModel TS-10GEStandard P.N. TS10GE/S3L/SHSApplications/Data Protocol
10 Gigabit Ethernet, STM64, OC-192, 10 Gigabit Fibre Channel
Performance Rate 9.95 – 11.3 GbpsRange @ 17 dB/km 350m @ 30 dB/km 300mMinimum Range 10 mBit error rate Less than 1E-12 (unfaded)MTBF 10 years
Transmitter Light source 1 EML DFB Laser + EDFAWavelength 1528-1565 nmTotal Output power 80 mWBeam divergence 2 mrad
Receiver Detector APDField of view 2 mrad
Interface Type XFPConnectors LC (other connectors available)Wavelength 1310 nm (other wavelengths available)Cable Up to 10km length over 9/125 SM fibre
Power Supplly Factory set: 100-240 VAC @ 50/60 Hz or 24-60 VDC(45 W)
EnvironmentalInformation
Operating temperature -30˚ C to +50˚ CStorage temperature -40˚ C to +70˚ CHumidity 95% non-condensingHousing Weatherproofing: IP56Eye safety Class 1M
Mechanical Design
Dimensions (mm) TereScope: 412x263x355mm, Service Box: 276X187x300mm,Mounted: 412x491x355mm
Weight Unit 17.5 kgModularity Modular Power supply, Modular Interface, Modular EDFA module, Modular SNMP
Diagnostics Indicators Airlink: Flag, Fiber Optic: Flag, Sync. Receive Signal Strength (Digital Display), Tx Laser, EDFA, SNMP TX and RX
Optical Block Heating, Elec. Block HeatingSelectors Transmit power attenuator.
Laser OFF, EDFA OFF, Control modeDry contact Two pairs of Pins of the management RJ45 connector can be used for dry contact purposes, for Airlink flag and
F/O flag alarms Management JT-SNMP-SW/E included (SNMP Unit with web based software, extended version license)
@17 dB/km = Cloudburst (100 mm/hr) - Medium snow - Light fog @30 dB/km = Rain (up to 180 mm/hr) - Blizzard - Moderate fog
TereScope® 10GE - Technical Specifications
TereScope® 5000 - up to GEGoing the farthest with modular design The carrier class TereScope® 5000 provides long distance high-speed Free Space Optics (FSO) connectivity. Operating at data rates of 10 Mbps to 1.5 Gigabit, TereScope® 5000 systems are deployable rapidly, providing long distances FSO optical wireless connectivity. The TS5000 exists in the following models: Ethernet, 4 x E1/T1, 100, 155 and GigabitTereScope® 5000 uses multiple transmit aperture technology (3 transmitters) to ensure high performance in adverse weather conditions. The receiver of the long-range TereScope® 5000 has an 8” diameter to overcome scintillation and other atmospheric noises in hot or cold weather.
In addition to the formerly existing modular power supply, the improved model of TS5000 has another power supply, which noticeably improves the MTBF (available only in TS5000/G, TS5000/100 and TS5000/155 models). When one of the power supplies breaks down, the other one continues to operate normally and transparently: the customer will only see on the back panel or on the MegaVision screen that one of the power supplies stopped working. The power supply modularity allows for replacing the faulty power supply without interrupting the normal operation of the link.
The TS5000 series also has a modular interface (SFP), i.e. the SFP can be easily changed in the field from multimode to singlemode or from 850 mm to 1300 mm (available only in TS5000/G and TS5000/155 models).An additional advantage of the transceiver modularity is the possibility to add the Fusion feature in the field in case this option has not been use.
Features- Accommodates 10 Mbps to 1.5 Gigabit networks, for protocols such as Ethernet, 4 x E1/T1, Fast Ethernet, ATM, Gigabit Ethernet. Storage- Supports multiple protocols: E3/T3, Fast and Gigabit Ethernet, FDDI, OC-3, ATM and STM-1, Fiber Channel- Distances up to 7 km- SNMP Built-in - PoE option (available only in TS5000/100) - 30w- FUSION option – Fail-over to radio backup- Modular network connectivity (interface)- Modular Power Supply- Redundant Power Supply - Optional ( available only in TS5000/G, TS5000/100 and TS5000/155 models)
Part number TS5000/4E1/V *or TS5000/4T1/V *
TS5000/ETH/V *
Model TS5000/4E1 or TS5000/4T1 *
TS5000/ETH
Standard P.N. TS5000/4E1/VS TS5000/ETH/VSApplications/Data Protocol
4E1:4x2.048 Mbps or 4T1:4x1.55 Mbp
G.703/G.704
Ethernet (10 Mbps)
Performance Rate 8.2Mbps 10Mbps
Range(1) @ 3 dB/km 7000 m 6700 m @ 5 dB/km 5300 m 5000 m @10 dB/km 3350 m 3200 m @17 dB/km 2270 m 2170 m @30 dB/km 1460m 1400mMinimum Range 450m 450mBit error rate Less than 1E - 9 (unfaded) Less than 1E - 9 (unfaded)MTBF 10 years
Transmitter Light source 3 x LasersWavelength 830 - 860 nmTotal Output power 150 mWBeam divergence 2 mrad
Receiver Detector APDField of view 2 mradSensitivity -56 dBm -56 dBm
Interface Type Electrical: E1:75 Ohm or 120 Ohm, T1: 100 Ohm Copper 10 BaseTX
Connectors Universal Connector RJ45
Impedance E1: 75 Ohm or 120 OhmCable Coax or STP STPCable loss Supports Short and Long haul trunks
Power Supplly Voltage range Factory set: 100-240 VAC @ 50/60 Hz or 35-60 VDC (V3 versions)Power consumption 30 W
EnvironmentalInformation
Operating temperature -30˚ C to +50˚ CStorage temperature -50˚ C to +70˚ CHumidity 95% non-condensingHousing Weatherproofing: IP66Eye safety Class 1M
Mechanical Design
Dimensions (mm) TereScope: 788 x 391 x 326 AD-5000: 253x355x429Mounted: 788x391x571
Weight Unit 15 kgAccessories 21.5 kg
Modularity Modular Power supply, Modular Interface, Redundant Power supply - optional Diagnostics Indicators Airlink: Flag, Sync E1 Ports: LED per port
Receive Signal Strength (Digital Display) Laser status (3 LEDs)
Airlink: Flag, Data. 10 BaseT: Flag, DataReceive Signal Strength (Digital Display),
Laser status (3 LEDs)Selectors Termination, Electrical receive sensitivity, Line incoding LLB,
RLB, IP address settingIP address setting
Management SNMP Protocol - Built-in6 Dry Contact ouputs: 4 for interface ports 1 for Airlink flag
1 for Airlink sync
SNMP Protocol - Built-inOne pair of pins of the main RJ45 connector can be used for
dry contacts purposes, for Airlink flag alarmStandardsCompliance
Jitter Specifications proposed for SONET/SDH equipment defined by the Bellcore Specifications: GR-253-CORE, Issue 2, December 1995 and ITU-T Recommendations: G.958 document. Typical Applications: OC-1, STS-3, ATM, FDDI, E3, Fast Ethernet etc...EN50081-1: 1991; EN50082-1: 1998; EN55022: 1997; EN61000-4-2: 1995; EN61000-4-3: 1995; EN61000-4-4: 1995; EN61000-4-5:1995; ENV50142; EN61000-4-6: 1996/ENV50141; EN61000-4-8: 1993; EN61000-4-11: 1994; EN61000-3-2:1995; IEC950, 1991, A1, A2, A3, A4; EN60950, 1992, A1,A2,A3,A4,A11; FCC part 15 Class A; UL1950,3rd Edition (1995); CSA22.2, No.950 (1995) ;weather proofing IP66
(1) @ 3 dB/km = Light rain (5-10 mm/hr) - Light haze @ 5 dB/km = Light to medium rain (15-20 mm/hr) - Haze @10 dB/km = Medium to heavy rain (45 mm/hr) - Light snow - Thin fog @17 dB/km = Cloudburst (100 mm/hr) - Medium snow - Light fog @30 dB/km = Rain (up to 180 mm/hr) - Blizzard - Moderate fog
TereScope® 5000 - Low Speed up to 10 Mbps Technical Specifications
TereScope® - The Most Comprehensive Free Space Optics Wireless solution
Part number TS5000/FET/F ** TS5000/XYL/F ** TS5000G/XYL/F**Model TS5000/100 TS5000/155 TS5000/GStandard P.N. TS5000/FET/F1S TS5000/M8L/F1S TS5000G/M8L/F1SApplications/Data Protocol
Fast Ethernet Fast Ethernet, ATM, OC3, STM1, SMPTE, E3, T3, OC1/STM0 & other
between 10 and 155Mbps
Gigabit Ethernet, Escon, 622 Mbps, Fibre channel and others between 100
and1500 MbpsPerformance Rate 100 Mbps 10-155 Mbps 100-1500 Mbps
Not attenuated. Attenuated (10db)
Not attenuated Attenuated(3TXs) (2TXs)
Range(1) @ 3 dB/km 5800 m 4300 m 3500 m 3100 m @ 5 dB/km 4400 m 3300 m 2750 m 2500 m @10 dB/km 2800 m 2150 m 1850 m 1650 m @17 dB/km 1920 m 1520 m 1300 m 1200 m @30 dB/km 1250 m 1000 m 870 m 820 mMinimum Range 570 m 200 m 700 m 500 mBit error rate Less than 1E - 12 (unfaded)MTBF 10 years
Transmitter Light source 3 x LasersWavelength 830 - 860 nmTotal Output power 20 - 150 mW 70 - 140 mWBeam divergence 2 mrad
Receiver Detector APDField of view 2 mradSensitivity -48 dBm -48 dBm -33 dBm
Interface Type 100Base TX or Optical SFP (optional) MM/SM 1310nm LC
SFP - Multimode (Singlemode available upon request)
Connectors RJ45 LCCable STP Up to 220m length @ 62.5 um &
Up to 500m length @ 50 umBuilt in Fusion Included, 100Base-T connection Included - Optical SFP portWavelength 1310 nm
(other wavelength available)850 nm
(other wavelength available)Output power -17 ± 3 dBm -3 to -9.5 dBmRX operating range -14 to - 30 dBm 0 to - 17 dBmVoltage range Factory set: 100-240 VAC @ 50/60 Hz
or 35-60 VDC (F13 versions) High PoE (Power over Ethernet): in F13 version
(Low voltage)
Factory set: 100-240 VAC @ 50/60 Hz or 24-60 VDC (F13 version)
Power consumption 25 WEnvironmentalInformation
Operating temperature -50˚ C to +50˚ C -30˚ C to +60˚ CStorage temperature -50˚ C to +70˚ CHumidity 95% non-condensingHousing Weatherproofing: IP66Eye safety Class 1M
Mechanical Design
Dimensions (mm) Terescope: 806 x 410 x 341 AD-5000: 253x355x429
mounted: 806 x 410 x 586Weight Unit 15 kg
Accessories 21.5 kgModularity Modular Power supply
Optical SFP: optional Redundant Power supply - optional
Modular Power supply SFP: interface
Redundant Power supply - optional Diagnostics Indicators Airlink: Link, Data.
100BaseTx (Main): Link, Data. Optical SFP (optional): Link, Data.
100BaseTx (redundant): Link, Data. Alignment, Loopback, Fusion mode
and activity, Heating status (if exists), Control mode: Hardware mode or
software mode.Power supply status, Heating active,
Receive Signal Strength (Digital Display), Lasers status (3 LEDs), SNMP
Link, Data
Airlink: Flag, Sync.SFP main and redundant: Flag, Sync. Alignment, Loopback
Fusion mode and activity, Heating status (if exists), Control mode: Hardware mode or software mode.
Power supply main and redundant status, Heating active, Receive Signal Strength (Digital Display), Lasers status (3 LEDs), SNMP: Link, Data
Selectors Loopback (local), Remote loopbackSignal attenuation for Short distance,
Laser On/Off, Fusion activation, Heating activation (if exists), Control mode.
Data Transmission
Alignment, Loopback (local), Remote loopback, Signal attenuation for short distance, Fusion activation, Laser On/Off. Heating activation (if exists)
Control mode.
Management JT-SNMP-SW/E included (SNMP Unit with web based software, extended
version license)Two pairs of Pins of the management RJ45 connector can be used for dry
contact purposes, for Airlink flag and 100BT flag alarms
JT-SNMP-SW/E included (SNMP Unit with web based software, extended version license)
Two pairs of Pins of the management RJ45 connector can be used for dry contact purposes, for Airlink flag and F/O flag alarms
StandardsCompliance
Jitter Specifications proposed for SONET/SDH equipment defined by the Bellcore Specifications: GR-253-CORE, Issue 2, December 1995 and ITU-T Recommendations: G.958 document. Typical Applications: OC-1, STS-3, ATM, FDDI, E3, Fast Ethernet etc...EN50081-1: 1991; EN50082-1: 1998; EN55022: 1997; EN61000-4-2: 1995; EN61000-4-3: 1995; EN61000-4-4: 1995; EN61000-4-5:1995; ENV50142; EN61000-4-6: 1996/ENV50141; EN61000-4-8: 1993; EN61000-4-11: 1994; EN61000-3-2:1995; IEC950, 1991, A1, A2, A3, A4; EN60950, 1992, A1,A2,A3,A4,A11; FCC part 15 Class A; UL1950,3rd Edition (1995); CSA22.2, No.950 (1995) ;weather proofing IP66
(1) @ 3 dB/km = Light rain (5-10 mm/hr) - Light haze @ 5 dB/km = Light to medium rain (15-20 mm/hr) - Haze @10 dB/km = Medium to heavy rain (45 mm/hr) - Light snow - Thin fog @17 dB/km = Cloudburst (100 mm/hr) - Medium snow - Light fog @30 dB/km = Rain (up to 180 mm/hr) - Blizzard - Moderate fog
TereScope® 5000 - High Speed 10-1500 Mbps Technical Specifications
TereScope® 4000 - 1 to 155Mbps SolutionsRobustness is the keyThe carrier class TereScope® 4000 operates at data rates of 1 Mbps to 155 Mbps. TereScope 4000 systems are used for medium to long distances and support a wide variety of protocols in full duplex at wire-speed. It can achieve distances of up to 5.5 km.The TS4000 exists in all models but Gigabit as follows: E1/T1, 4 x E1/T1, Ethernet, 34 and 155.TereScope® 4000 uses multiple transmit aperture technology (3 transmitters) to ensure high performance in adverse weather conditions. The receiver of the long-range TereScope® 4000 has a diameter of 8” to overcome scintillation and other atmospheric noises in hot or cold weather.Regarding functionality, the TS4000 has all the advantages of the TS5000, such as operation in Open Protocol mode, optional redundant power supply and modular interface (available only in TS4000/155 and TS4000/100 models).
Features- Accommodates 1 to 155 Mbps networks, for protocols such as E1/T1, Ethernet, 4xE1/T1, 34Mbps, Fast Ethernet, ATM- Supports protocols: E1/T1, E3/T3, 4 x E1/T1, Ethernet, Fast Ethernet, FDDI, OC-3, ATM and STM-1- Distances up to 5.5 km- Built-in SNMP management (in TS4000/155 and TS4000/100 models)- FUSION option – Fail-over to radio backup- Modular network connectivity (in TS4000/155)- Modular Power Supply- Redundant Power Supply - Optional (in TS4000/155 and TS4000/100 models)- POE option, available only in TS4000/100 - Low voltage version (30w)
���������������
������������
������������
����������
���������������
������ ������
������� ������� �� ���
������� ����� ����
Part number TS4000/E1/V* or TS4000/T1/V*
TS4000/4E1/V* or TS4000/4T1/V*
TS4000/ETH/V* TS4000/34XYZ/V*
Model TS4000/E1 or TS4000/T1 TS4000/4E1 or TS4000/4T1 TS4000/ETH TS4000/34Standard P.N. TS4000/E1/VS TS4000/4E1/VS TS4000/ETH/VS TS4000/34M8T/VSApplications/Data Protocol
E1: 2.048 Mbps or T1:1.55Mbps G.703/G.704
4E1:4x2.048 Mbps or 4T1: 4x1.55 Mbps G.703/G.704
Ethernet (10 Mbps) Open Protocol up to 34Mbps
Performance Rate 10 Mbps 1-34 MbpsRange(1) @ 3dB/km 5500m 5000 m 5000 m 4400 m @ 5dB/km 4200 m 3850 m 3850 m 3350 m @10dB/km 2700 m 2500 m 2500 m 2240 m @17dB/km 1880 m 1730m 1730 m 1550 m @30dB/km 1220m 1130m 1130m 1040 mMinimum Range 200m 150m 150m 200 mMinimum Range Less than 1E - 9 (unfaded)MTBF 10 years
Transmitter Light source 3 x LasersWavelength 830 - 860 nmTotal Output power
75 mW
Beam divergence 3 mradReceiver Detector Silicon Photodiode
Field of view 5 mradSensitivity -51 dBm -47 dBm -47 dBm -43 dBm
Interface Type Electrical Electrical Copper 10 BaseTX Fiber Optic Transceiver - Multimode
(Singlemode available uponrequest)
Connectors BNC and RJ48 (STP) Universal Connector RJ45 ST other connectors available
Impedance E1: 75 Ohm or 120 Ohm T1:100 ohmCable Coax 75 Ohm or STP STPCable loss Supports short and long haul trunksWavelength 850nm
(other wavelengths available)Output power -17 ± 2 dBm (measured with
a 62.5 micro fiber)Receiver operating range
-14 to - 27 dBm
Power Supplly Voltage range Factory set: 100-240 VAC @ 50/60 Hz or 35-60 VDC (V3 version)Power consumption
30 W
EnvironmentalInformation
Operating temperature
-50˚ C to +60˚ C
Storage temperature
-50˚ C to +70˚ C
Humidity 95% non-condensingHousing Weatherproofing: IP66Eye safety Class 1M
Mechanical Design
Dimensions (mm TereScope: 788 x 391 x 326AD-5000: 253 x 355 x 429Mounted: 788 x 391 x 571
Weight Unit 15 kgAcc. 21.5 kg
Modularity Modular Power Supply Diagnostics
Indicators Airlink: Flag, Electrical: Flag, Local loopback Receive Signal Strength
(Digital Display)
Airlink: Flag, Sync E1 Ports: LED per port, Receive Signal Strength
(Digital Display)
Airlink: Flag, Data. 10BaseT: Flag, Data Receive Signal Strength
(Digital Display)
Airlink: Flag, Sync., Fiber Optic: Flag, Sync. Alignment, Loopback,
Receive Signal Strength (Digital Display)
Selectors Termination, Electrical receive sensitivity, line incoding, LLB, RLB
IP address setting
Termination, Electrical receive sensitivity,
Line incoding, LLB, RLBIP address setting
IP address setting Data Rate, Alignment, Loopback (local)
Management SNMP Protocol - OptionalTwo pair of pins of the main RJ48 connector can be used
for dry contacts purposes, for air link flag alarm and Electrical
Flag alarm
SNMP Protocol - OptionalP.N. with SNMP:
TS4000/4E1/VMS6 Dry Contact ouputs: 4 for E1 Ports , 1 for air-link flag , 1 for
air-link sync
SNMP Protocol - Optional P.N. with SNMP: TS4000/ETH/VMS
one pair of pins of the main RJ45 connector can be used for dry contacts purposes, for air link
flag alarm
SNMP card - optional.dry contacts through RSM-DC
StandardsCompliance
Jitter Specifications proposed for SONET/SDH equipment defined by the Bellcore Specifications: GR-253-CORE, Issue 2, December 1995 and ITU-T Recommendations: G.958 document. Typical Applications: OC-1, STS-3, ATM, FDDI, E3, Fast Ethernet etc...EN50081-1: 1991; EN50082-1: 1998; EN55022: 1997; EN61000-4-2: 1995; EN61000-4-3: 1995; EN61000-4-4: 1995; EN61000-4-5: 1995; ENV50142; EN61000-4-6: 1996/ENV50141; EN61000-4-8: 1993; EN61000-4-11: 1994; EN61000-3-2:1995; IEC950, 1991, A1, A2, A3, A4; EN60950, 1992, A1, A2, A3, A4, A11; FCC part 15 Class A; UL1950,3rd Edition (1995); CSA22.2, No.950 (1995) ;weather proofing IP66
(1) @ 3 dB/km = Light rain (5-10 mm/hr) - Light haze @ 5 dB/km = Light to medium rain (15-20 mm/hr) - Haze @10 dB/km = Medium to heavy rain (45 mm/hr) - Light snow - Thin fog @17 dB/km = Cloudburst (100 mm/hr) - Medium snow - Light fog @30 dB/km = Rain (135 mm/hr) - Blizzard - Moderate fog
TereScope® 4000 - Low Speed 1-34 Mbps Technical Specifications
TereScope® - The Most Comprehensive Free Space Optics Wireless solution
Part number TS4000/XYL/F** TS4000/FET/F**Model TS4000/155 TS4000/100Standard P.N. TS4000/M3L/F1S TS4000/FET/F13Applications/Data Protocol
Fast Ethernet, ATM, OC3, STM1, SMPTE, E3, T3, OC1/STMO & others between 10 and 155Mbps
Fast Ethernet
Performance Rate 10-155 Mbps 100 MbpsRange(1) @ 3 dB/km 3500 m @ 5 dB/km 2750 m @10 dB/km 1850 m @17 dB/km 1320 m @30 dB/km 880 mMinimum Range 120 mMinimum Range Less than 1E - 12(unfaded)MTBF 10 years
Transmitter Light source 3 x VCSELsWavelength 830 - 860 nmTotal Output power 75 mWBeam divergence 3 mrad
Receiver Detector Silicon PhotodiodeField of view 5 mradSensitivity -37 dBm
Interface Type SFP - Multimode (Single mode available upon request) 100BaseTX or Optical SFP (optional) MM/SM 1310nm LCConnectors LC RJ45Cable STPWavelength 1310 nm (other wavelengths available)Output power -17 ± 3 dBmReceiver operating range
-14 to - 30 dBm
Built-in Fusion Included – Optical SFP port Included – 100 Base-T connectionPower Supplly Voltage range Factory set: 100-240 VAC @ 50/60 Hz or 24-60 VDC
( F3 version)Factory set: 100-240 VAC @ 50/60 Hz or 24-60 VDC
( F3 versions)High PoE (Power over Ethernet): In F3 version (Low voltage)
Power consumption 15 WEnvironmentalInformation
Operating temperature
-50˚C to +60 ˚C
Storage temperature -50 ˚C +/- 70 ˚CHumidity 95% non-condensingHousing Weatherproofing: IP66Eye safety Class 1M
Mechanical Design
Dimensions (mm TereScope: 806 x 410 x 341 AD-5000: 253 x 355 x 429 Mounted:806 x 410 x 586
Weight Unit 15 kgAcc. 21.5 kg
Modularity Modular Power supply, SFP InterfaceRedundant Power supply - optional
Modular Power supply, Optical SFP: optional Redundant Power supply - optional
Diagnostics Indicators Airlink:Flag, Sync. SFP main and redundant:Flag, Sync.Alignment, Loopback, Fusion mode and activity, Heating
status (if exists), Control mode: Hardware mode or softwaremode. Power supply main and redundant status, Heating
active, Receive Signal Strength (Digital Display), Lasers status (3 LEDs), SNMP Link, data
Airlink: Flag, Data, 100 Base Tx (Main):Link, Data. Optical SFP (optional): Link, Data. 100BaseTx (redundant): Link, Data. Alignment, Loopback, Fusion mode and activity, Heating status (if exists), Control mode: Hardware mode or software mode. Power supply status, Heating active, Receive Signal Strength
(Digital Display), Lasers status (3 LEDs), SNMP Link,DataSelectors Alignment, Loopback (local), Remote Loopback, Signal
attenuation for Short distance, Laser On/Off, Fusion activation, Heating activation (if exists), Control mode.
Loopback (local), Remote loopback, Signal attenuation for Short distance, Laser On/Off, Fusion activation, Heating activation (if
exists), Control mode, Data Transmission Management JT-SNMP-SW/E included (SNMP Unit with web based
software, extended version License)Two pairs of pins of the management RJ45 connector can be
used for dry contact purposes, for Airlink flag and F/O flag alarms
JT-SNMP-SW/E included (SNMP Unit with web based software, extended version License)
Two pairs of pins of the management RJ45 connector can be used for dry contact purposes, for Airlink flag and 100BT flag
alarmsStandardsCompliance
Jitter Specifications proposed for SONET/SDH equipment defined by the Bellcore Specifications: GR-253-CORE, Issue 2, December 1995 and ITU-T Recommendations: G.958 document. Typical Applications: OC-1, STS-3, ATM, FDDI, E3, Fast Ethernet etc... EN50081-1: 1991; EN50082-1: 1998; EN55022: 1997; EN61000-4-2: 1995; EN61000-4-3: 1995; EN61000-4-4: 1995; EN61000-4-5:1995; ENV50142; EN61000-4-6: 1996/ENV50141; EN61000-4-8: 1993; EN61000-4-11: 1994; EN61000-3-2:1995; IEC950, 1991, A1, A2, A3, A4; EN60950, 1992, A1,A2,A3,A4,A11; FCC part 15 Class A; UL1950,3rd Edition (1995); CSA22.2, No.950 (1995) ;weather proofing IP66
(1) @ 3 dB/km = Light rain (5-10 mm/hr) - Light haze @ 5 dB/km = Light to medium rain (15-20 mm/hr) - Haze @10 dB/km = Medium to heavy rain (45 mm/hr) - Light snow - Thin fog @17 dB/km = Cloudburst (100 mm/hr) - Medium snow - Light fog @30 dB/km = Rain (135 mm/hr) - Blizzard - Moderate fog
TereScope® 4000 - High Speed 10-155 Mbps Technical Specifications
TereScope® 2000 –UP to GE - For Voice Connectivity - E1/T1 & 4x E1/4T1 SolutionsThe TereScope® that never tiresThe carrier class TereScope® 2000 operates at data rates of 2 Mbps to 1.25 Gbps.Terescope 2000 systems are used for medium distances and support a wide variety of protocols at full duplex at wire-speed.TS2000 exists in the following models: E1/T1, 4x E1/T1, Fast Ethernet and Gigabit Ethernet.TereScope® 2000 systems, like all TereScope units, are deployable within a matter of hours. TereScope 2000 supplies a connectivity that reaches up to 4.1 km and supports various protocols.The TS2000 has two transmitters and an 8” RX lens - these features almost eliminate any scintillation influence and en-hance the transceiver’s reliability.The TS2000/G can be ordered with the Fusion option (TS2000/G-F), in this case the TS2000/G-F model can be connected to the back-up radio systemThe TS2000 is especially recommended for Voice Connectivity - E1/T1 & 4x E1/4T1 solutions even for short distances
Features- Accommodates Gigabit Ethernet, Fibre Channel, Fast Ethernet, E1/ T1 and 4 x E1/4T1 protocols- Distances up to 4.1 km- Built-in dry contacts- SNMP - Optional (in TS2000/G the SNMP is included)- PoE available in TS2000/100, low voltage version- Fusion option: Fail over to radio back-up (in TS2000/G only)
Part number TS2000/E1/V* or TS2000/T1/V* TS2000/4E1/V* or TS2000 4T1/V* Model TS2000/E1 or TS2000/T1 TS2000/4E1 or TS2000/4T1Standard P.N TS2000/E1/VS TS2000/4E1/VSApplications/Data Protocol
E1: 2.048 Mbps or T1:1,55MbpsG.703/G.704
4E1: 4x2.048 Mbps or 4T1: 4x1,55Mbps G.703/G.704
Performance RateRange(1) @ 3 dB/km 3400 m 2750 m @ 5 dB/km 2700 m 2150 m @10 dB/km 1810 m 1500 m @17 dB/km 1300 m 1100 m @30 dB/km 880 m 740 mMinimum Range 150 m 100 mBit error rate Less than 1E - 9 (unfaded)MTBF 10 years
Transmitter Light source 2 VCSELsWavelength 830 - 860 nmTotal Output power 7 mWBeam divergence 4.5 mrad
Receiver Detector Si PINField of view 5 mradSensitivity -51dBm -45 dBm
Interface Type Electrical: E1: 75 Ohm or 120 Ohm, T1: 100 OhmConnectors RJ48 (STP) Universal connectorImpedance E1: 120 Ohm , T1: 100 Ohm E1: 75 Ohm or 120 Ohm,
T1: 100 OhmCable STP Coax 75 Ohm or STPCable loss Supports Short and Long haul trunksOutput powerRX Operating rangeBuilt-in Fusion
Power Supplly Voltage range Factory set: 100 - 240 VAC @50/60 Hz or 35-60 VDC (V3 vertions)Power consumption 15 W
EnvironmentalInformation
Operating temperature -30˚ C to +50˚ CStorage temperature -50˚ C to +70˚ CHumidity 95% non-condensingHousing Weatherproofing: IP66Eye safety Class 1M
Mechanical Design
Dimensions (mm TereScope: 788 x 391 x 326 JAH-8+JMP-8: 234 X 250 x 180
Mounted: 788 x 391 x 506Weight Unit 13 kg
Accessories 13 kg Diagnostics Indicators Airlink: Flag, Electrical: Flag , Local loopback
Receive Signal Strength (Digital Display)Airlink: Flag, Sync. E1 Ports: LED per port.Receive Signal Strength (Digital Display)
Selectors Termination, Electrical receive sensitivity, Line incoding, Local Loopback, Remote loopBack, IP address setting
Management SNMP Protocol - OptionalP.N with SNMP: TS2000/E1/VMS
One pair of pins of the main RJ48 connector can be used for dry contacts purposes, for air link flag alarm
SNMP card - OptionalP.N with SNMP: TS2000/E1/VMS
6 Dry Contact ouputs:4 interface ports , 1 for air-link flag, 1 for air-link sync
StandardsCompliance
EN50081-1: 1991; EN50082-1: 1998; EN55022: 1997; EN61000-4-2: 1995; EN61000-4-3: 1995; EN61000-4-4: 1995; EN61000-4-5:1995; ENV50142; EN61000-4-6: 1996/ENV50141; EN61000-4-8: 1993; EN61000-4-11: 1994; EN61000-3-2:1995; IEC950, 1991, A1, A2, A3, A4; EN60950, 1992, A1,A2,A3,A4,A11; FCC part 15 Class A; UL1950,3rd Edition (1995); CSA22.2, No.950 (1995) ;weather proofing IP66
(1) @ 3 dB/km = Light rain (5-10 mm/hr) - Light haze @ 5 dB/km = Light to medium rain (15-20 mm/hr) - Haze @10 dB/km = Medium to heavy rain (45 mm/hr) - Light snow - Thin fog @17 dB/km = Cloudburst (100 mm/hr) - Medium snow - Light fog @30 dB/km = Rain (up to 180 mm/hr) - Blizzard - Moderate fog
TereScope® 2000 Low Speed 1.5 - 10Mbps - Technical Specifications
Part number TS2000/FE-O/V* TS2000G/XYL/V* orTS2000G/XYL/F*
Model TS2000/100 TS2000/G or TS2000/G-FStandard P.N TS2000/FE-O/V3 TS2000G/M8L/VSApplications/Data Protocol
Fast Ethernet Gigabit-Ethernet, Fibre Channel
Performance Rate 100 Mbps 1.0625Gbps & 1.25GbpsRange(1) @ 3 dB/km 2850 m 2300 m @ 5 dB/km 2270 m 1800 m @10 dB/km 1570 m 1300 m @17 dB/km 1130 m 980 m @30 dB/km 780 m 680 mMinimum Range 100 m 100 mBit error rate Less than 1E - 12 (unfaded)MTBF 10 years
Transmitter Light source 2 VCSELsWavelength 830 - 860 nmTotal Output power 50 mW 30 mWBeam divergence 3 mrad
Receiver Detector Si PINField of view 5 mrad 2.5 mradSensitivity -34 dBm -33 dBm
Interface Type 100BaseTX or Optical SFP (optional) MM/SM 1310nm LC SFP - Multimode (Single mode available upon request)Connectors RJ45 (LC for the Optical option) LCWavelength Optical SFP: 1310 nm
(other wavelength available)850nm
(other wavelength available)Cable STP (F/O for the Optical option) Up to 220m length @ 62.5um & Up to 500m length
@ 50umOutput power -17 ± 3dBm (SFP) -3 to -9.5 dBmRX Operating range -14 to -30 dBm (SFP) 0 to -17 dBmBuilt-in Fusion optional Optical SFP port
Power Supplly Voltage range Factory set: 100 - 240 VAC @50/60 Hz or 24-60 VDC (V3 version)
PoE (Power over Ethernet): In V3 version (low voltage)
Factory set: 100 - 240 VAC @50/60 Hz or 24-60 VDC (V3 versions)
Power consumption 15 WEnvironmentalInformation
Operating temperature -30˚ C to +50˚ CStorage temperature -50˚ C to +70˚ CHumidity 95% non-condensingHousing Weatherproofing: IP66Eye safety Class 1M
Mechanical Design
Dimensions (mm) TereScope: 806 x 410 x 341JAH-8: 234 X 250 x 180
Mounted: 806 x 410 x 521Weight Unit 13 kg
Accessories 13 kg Diagnostics Indicators Airlink: Link, Data. 100BaseTX: Link, Data. Optical SFP
(optional): Link, Data. Alignment mode, Loopback mode, Software mode, Laser status, Management TX and RX,
Receive Signal Strength (Digital Display)
Airlink: Flag, SFP main and redundant: Flag, Laser enabled, Alignment, Loopback mode, Fusion mode
and activity, Software mode, Management TX and RX, Receive Signal Strength (Digital Display)
Selectors Alignment, Loopback (local), Laser On/Off, Window Heater (if exists), Control Mode, Data Transmission
Alignment, Loopback (local), Signal attenuation (for short distance), Fusion activation, Data Rate, Control
Mode. Management SNMP hardware present in the product. SNMP software
licenses: JT-SNMP-SW/B or JT-SNMP-SW/E: optionalP.N of the product including SNMP software license:
TS2000/FE - O/VM*: License for Basic versionTS2000/FE-O/VE*: License for Extended version
2 Dry Contact ( air- link and FO link )
JT-SNMP-SW/E included (SNMP Unit with web based software, extended version License)
4 dry contacts for: airlink flag, fiber optic flag, laser enabled and power
StandardsCompliance
EN50081-1: 1991; EN50082-1: 1998; EN55022: 1997; EN61000-4-2: 1995; EN61000-4-3: 1995; EN61000-4-4: 1995; EN61000-4-5:1995; ENV50142; EN61000-4-6: 1996/ENV50141; EN61000-4-8: 1993; EN61000-4-11: 1994; EN61000-3-2:1995; IEC950, 1991, A1, A2, A3, A4; EN60950, 1992, A1, A2, A3, A4, A11; FCC part 15 Class A; UL1950,3rd Edition (1995); CSA22.2, No.950 (1995) ; weather proofing IP66
(1) @ 3 dB/km = Light rain (5-10 mm/hr) - Light haze @ 5 dB/km = Light to medium rain (15-20 mm/hr) - Haze @10 dB/km = Medium to heavy rain (45 mm/hr) - Light snow - Thin fog @17 dB/km = Cloudburst (100 mm/hr) - Medium snow - Light fog @30 dB/km = Rain (up to 180 mm/hr) - Blizzard - Moderate fog
TereScope® 2000 - High Speed 10-1500 Mbps Technical Specifications
TereScope® 800 - up to 155Mbps solutionsThe strong and compact TereScope®The TereScope® 800 is a solution with an innovative and compact design.The TS800/155* is a high quality product designed for the medium range connections reaching distances of up to 1000 m.
The TS800 exists in the following models: TS800/155 and TS800/100.
Both of them exist in the wide beam version: TS800/155-WB and TS800/100-WB.These two models are intended for unstable installations. Due to their wide beam (11 mrad instead of 3 mrad – nearly 4 times more) these models can be installed on high masts with large angular movement (up to a certain point, of course) or on high buildings with large sway or at other sites lacking stability.
Like his “big brothers”, the TS800/155 can operate with all the data and protocol in the 10-155 Mbps range without affecting the performance. The TereScope identifies the protocol automatically and locks on it. In addition we have clock and data recovery for each protocol.The TS800/155 can be ordered with the Fusion option and it can be added in the field as well
Part number TS800/XYL/V* or TS800/XYL/F* TS800W/XYL/V* or TS800W/XYL/F*Model TS800/155 or TS800/155-F TS800/155-WB or TS800/155F-WBStandard P.N. TS800/M3L/VS or TS800/M3L/FS TS800W/M3L/VS or TS800W/M3L/FSApplications/Data Protocol
Fast Ethernet, ATM, OC3, STM1, SMPTE, E3, T3, OC1/STMO & and others between 10 and 155Mbps
Performance Rate 10 -155 MbpsRange @ 3 dB/km 1900 m 860 m @ 5 dB/km 1600 m 760 m @10 dB/km 1150 m 600 m @17 dB/km 850 m 485 m @30 dB/km 600 m 370 mMinimum Range Less than 10 mBit error rate Less than 1E - 12 (unfaded)MTBF 10 years
Transmitter Light source 1 laserWavelength 830 - 860 nmTotal Output power 28 mWBeam divergence 3 mrad 11 mrad
Receiver Detector Silicon PhotodiodeField of view 14 mradSensitivity -37 dBm
Interface Type STP- Multimode (Singlemode available upon request)Connectors LCWavelength 1310 nm (other wavelengths available)Output power -17 to ±3 dBmReceiver operating range -14 to -30 dBm
Power Supplly Built-in Fusion Optional - Optical SFP portVoltage range Factory set: 100 - 240 VAC @50/60 Hz or 24-60 VDC (V3 and F3 versions)Power consumption 15 W
EnvironmentalInformation
Operating temperature -50˚ C to +60˚ CStorage temperature -50˚ C to +70˚ CHumidity 95% non-condensingHousing Weatherproofing: IP66Eye safety Class 1M
Mechanical Design
Dimensions (mm) TereScope: 470 x 282 x 178 Mounted on JAH-L: 470 x 282 x 355
Weight Unit 5 kgAccessories 5.5 kg
Diagnostics Indicators Airlink: Flag, Sync. Fiber Optic: Flag, Sync., Alignment mode, Loopback mode, Remote LoopBack mode,Fusion mode and activity, Software mode,Laser status, Management Tx and RX, F/O Redundant Link and Sync., Receive
Signal Strength (Digital Display) Selectors Alignment, Loopback (local), Remote LoopBack, Alignment Signal Attenuation, Laser On/Off, Fusion, activation
Window Heater (if exists), control mode. Management JT-SNMP-SW/B included (SNMP Unit with web based software, Basic version Licence) can be upgraded to
JT-SNMP-SW/E (Extended version License) 2 Dry Contacts (AirLink and FO Link).StandardsCompliance
Jitter Specifications proposed for SONET/SDH equipment defined by the Bellcore Specifications: GR-253-CORE, Issue 2, December 1995 and ITU -T Recommendations: G.958 document. Typical Applications: OC-1, STS-3, ATM, FDDI, E3, Fast Ethernet etc... EN50081-1: 1991; EN50082-1: 1998; EN55022: 1997; EN61000-4-2: 1995; EN61000-4-3: 1995; EN61000-4-4: 1995; EN61000-4-5: 1995; ENV50142; EN61000-4-6: 1996/ENV50141; EN61000-4-8: 1993; EN61000-4-11: 1994; EN61000-3-2: 1995; IEC950, 1991, A1, A2, A3, A4; EN60950, 1992, A1, A2, A3, A4, A11; FCC part 15 Class A; UL1950, 3rd Edition (1995); CSA22.2, No.950 (1995); weather proofing IP66
@ 3 dB/km = Light rain (5-10 mm/hr) - Light haze@ 5 dB/km = Light to medium rain (15-20 mm/hr) - Haze@10 dB/km = Medium to heavy rain (45 mm/hr) - Light snow - Thin fog@17 dB/km = Cloudburst (100 mm/hr) - Medium snow - Light fog@30 dB/km = Rain (up to 180 mm/hr) - Blizzard - Moderate fog
TereScope® 800 -10-155 Mbps - Technical Specifications
TereScope® - The Most Comprehensive Free Space Optics Wireless solution
Part number TS800/FET/F* TS800W/FET/F*Model TS800/100-F TS800/100F-WBStandard P.N. TS800/FET/F3 TS800W/FET/F3Applications/Data Protocol
Fast Ethernet
Performance Rate 100 MbpsRange @ 3 dB/km 1900 m 860 m @ 5 dB/km 1600 m 760 m @10 dB/km 1150 m 600 m @17 dB/km 850 m 485 m @30 dB/km 600 m 370 mMinimum Range Less than 10 mBit error rate Less than 1E - 12 (unfaded)MTBF 10 years
Transmitter Light source 1 laserWavelength 830 - 860 nmTotal Output power 28 mWBeam divergence 3 mrad 11 mrad
Receiver Detector Silicon PhotodiodeField of view 14 mradSensitivity -37 dBm
Interface Type Electrical - 100BaseTXConnectors RJ45
Power Supplly Built-in Fusion Included - 100Base TX connectionVoltage range Factory set: 100 - 240 VAC @50/60 Hz or 24-60 VDC (V3 and F3 versions)
PoE (Power over Ethernet): In V3 version (Low voltage)Power consumption 15 W
EnvironmentalInformation
Operating temperature -50˚ C to +60˚ CStorage temperature -50˚ C to +70˚ CHumidity 95% non-condensingHousing Weatherproofing: IP66Eye safety Class 1M
Mechanical Design
Dimensions (mm TereScope: 470 x 282 x 178Mounted on JAH-L: 470 x 282 x 355
Weight Unit 5 kgAccessories 5.5 kg
Diagnostics Indicators Airlink: Link, Data, 100Base TX Main: Link, Data. Alignment mode, Loopback mode, Fusion mode and activity, Software mode, Laser status, Management Tx and RX, 100BaseTx Redundant Link and Data
Receive Signal Strength (Digital Display) Selectors Alignment, Loopback (local), Remote LoopBack, Alignment Signal Attenuation, Laser On/Off, Fusion, activation
Window Heater (if exists), Control Mode. Data Transmission Management JT-SNMP-SW/B included (SNMP Unit with web based software, Basic version Licence) can be upgraded to
JT-SNMP-SW/E (Extended version License) 2 Dry Contacts (AirLink and FO Link).StandardsCompliance
Jitter Specifications proposed for SONET/SDH equipment defined by the Bellcore Specifications: GR-253 - CORE, Issue 2, December 1995 and ITU -T Recommendations: G.958 document. Typical Applications: OC-1, STS-3, ATM, FDDI, E3, Fast Ethernet etc.. EN50081-1: 1991; EN50082-1: 1998; EN55022: 1997; EN61000-4-2: 1995; EN61000-4-3: 1995; EN61000-4-4: 1995; EN61000-4-5: 1995; ENV50142; EN61000-4-6: 1996/ENV50141; EN61000-4-8: 1993; EN61000-4-11: 1994; EN61000-3-2:1995; IEC950, 1991, A1, A2, A3, A4; EN60950, 1992, A1, A2, A3, A4, A11; FCC part 15 Class A; UL1950, 3rd Edition (1995); CSA22.2, No.950 (1995); weather proofing IP66
@ 3 dB/km = Light rain (5-10 mm/hr) - Light haze@ 5 dB/km = Light to medium rain (15-20 mm/hr) - Haze@10 dB/km = Medium to heavy rain (45 mm/hr) - Light snow - Thin fog@17 dB/km = Cloudburst (100 mm/hr) - Medium snow - Light fog@30 dB/km = Rain (up to 180 mm/hr) - Blizzard - Moderate fog
TereScope® 800 - Fast Ethernet - 100 Mbps Technical Specifications
The TS800/100 has the Fusion feature built-in.The TS800/100 in its standard version (low voltage) has the PoE feature.
Features- Data rate between 10 -155 Mbps - Supports protocols: E3/T3, 4xE1/T1, Ethernet, Fast Ethernet FDDI, OC-3, ATM and STM-1- Distances up to 1000 m- SNMP - The license for the basic version is included- FUSION option - Failover to radio backup (included in TS800/100)- PoE available in TS800/100 only - low voltage version.
Part number TS800/E1/V*or TS800/T1/V* TS800/4E1/V*or TS800/4T1/V* TS800/ETH/V*
Model TS800/E1 or TS800/T1 TS800/4E1 or TS800/4T1 TS800/ETH/V*
Standard P.N. TS800/E1/VS TS800/4E1/VS TS800/ETH/VS
Applications/Data Protocol
E1 or T1G.703/G.704
4E1 or 4T1G.703/G.704
Ethernet
Performance Rate 2.048 Mbps or 1.55 Mbps 4 x 2.048 Mbps or 4x1.55 Mbps 10Mbps
Range @ 3 dB/km 2750 m 2000 m 2000 m
@ 5 dB/km 2200 m 1640 m 1640 m
@10 dB/km 1500 m 1180 m 1180 m
@17 dB/km 1100 m 870 m 870 m
@30 dB/km 750 m 610 m 610 m
Minimum Range 50 m 50 m 50 m
Bit error rate Less than 1E - 9 (unfaded)
MTBF 10 years
Transmitter Light source 1 VCSELs
Wavelength 830 - 860 nm
Total Output power 8 mW
Beam divergence 3.5 mrad
Receiver Detector Si PIN
Field of view 14 mrad
Sensitivity -50 dBm -45 dBm -45 dBm
Interface Type Electrical Electrical Copper - 10BaseT
Connectors RJ48 (STP) RJ48 (STP) RJ45
Impedance 120 Ohm, T1:100 Ohm 75 or 120 Ohm for E1 input or 100 Ohm for T1 input
Cable STP STP 0r Coax STP
Cable loss Supports Short and Long haul trunks
Power Supplly Voltage range Factory set: 100 - 240 VAC @50/60 Hz or 24-60 VDC (V3 Versions)
Power consumption 10W 15W
EnvironmentalInformation
Operating temperature -50˚ C to +60˚ C
Storage temperature -50˚ C to +70˚ C
Humidity 95% non-condensing
Housing Weatherproofing: IP66
Eye safety Class 1M
Mechanical Design Dimensions (mm TereScope: 470 x 282 x 178 Mounted on JAH-L: 470 x 282 x 355
Weight Unit 5 kg
Accessories 3.5 kg
Diagnostics
Indicators Airlink: Flag, Electrical: Flag, Local loopback, Receive Signal Strength (Digital Display)
Airlink: Flag, Sync. E1 Ports: LED per port. Receive Signal Strength (Digital Display)
Airlink: Link , Data. 10Base Tx: Link, Data. Loopback mode, Receive Signal Strength
(Digital Display)
Selectors Termination, Electrical Receive sensitivity, Line coding, Local loopback
Remote Loop Back. IP address setting
Termination, Electrical receive sensitivity, Local loopback, Line incoding
Remote Loop Back, IP address setting
Management SNMP Protocol - OptionalP.N with SNMP: TS800/E1/VMS
Dray contact: One pair of pins of the main RJ48 connector can be used for dry contact
purposes, for Airlink flag alarm.
SNMP Protocol - OptionalP.N with SNMP: TS800/4E1/VMS
6 Dry contact outputs: 4 for interface ports1 for air-link flag and 1 for air-link sync
SNMP - Optional
StandardsCompliance
ITU G.703, G.704, G.706, G.736, G.737, G.738, G.739, G.742, G.775, G.823; EN50081-1: 1991; EN50082-1: 1998; EN55022: 1997; EN61000-4-2: 1995; EN61000-4-3: 1995; EN61000-4-4: 1995; EN61000-4-5: 1995/ ENV50142; EN61000-4-6: 1996/ENV50141; EN61000-4-8: 1993; EN61000-4-11: 1994; EN61000-3-2: 1995; IEC 950, 1991, A1, A2, A3, A4 ; EN 60950, 1992, A1, A2, A3, A4, A11 UL1950, 3rd Edition (1995) CSA 22.2, No. 950 (1995) ; Weatherproof: IP66
@ 3 dB/km = Light rain (5-10 mm/hr) - Light haze@ 5 dB/km = Light to medium rain (15-20 mm/hr) - Haze@10 dB/km = Medium to heavy rain (45 mm/hr) - Light snow - Thin fog@17 dB/km = Cloudburst (100 mm/hr) - Medium snow - Light fog@30 dB/km = Rain (up to 180 mm/hr) - Blizzard - Moderate fog
TereScope®800 - Low Speed 1.5 -10Mbps Technical Specifications
TereScope® 700 - up to GEHigh Bandwidth – Short Distances – Excellent Price/Performance The TS700 series provides high speed Free Space optics (FSO) connectivity for a variety of first mile applications. Operating at full wire speed data rates of 10 Mbps to 1.25 Gbps, the TS700 series is rapidly deployable, without re-quiring right-of-way or government permits for installation, providing you with communication links in hours instead of weeks or months.The TS700 is a high quality product specially designed for short distance connections reaching distances of up to 400 m at the best price perfor-mance ratio possible.
The TS700 has two models: TS700/100 and TS700/G.- The TS700/100 was designed specifically for Fast Ethernet. This transceiver has a copper 100BaseT interface. - The TS700/100 model includes the option for an optical SFP. Therefore if somebody needs a TereScope for a short distance for Fast Ethernet with an optical interface, he can order the TS700/100 and the required SFP (it can be purchased from MRV).- The TS700/100 low voltage version (V3) has a Power over Ethernet (PoE) configuration that operates in accordance with international standards. (IEEE standard 802.3af ).- The TS700/G operates at Gigabit Ethernet and Fibre Channel. The TS700/G can be ordered with the Fusion option (TS700/G-F); in this case the TS700/G-F model can be connected to the back-up radio system
Features- Accommodates 1.0625 & 1.25 Gbps networks, for protocols such as: Fibre Channel and Gigabit Ethernet, or 100 to 155 Mbps (Fast Ethernet)- PoE (power over Ethernet) in the TS700/100 model - Distances up to 400 meters- Built-in dry contacts- SNMP – optional (in TS700/G the SNMP is included)- Compact solution- Fusion option: fail over to radio back-up (in TS700/G only)
�� ����
Full duplex 155 Mbps wireless links for easy extension of Fast Ethernet, FDDI, SDH and ATM networks.
TereScope 700 Series
opticalwireless link
Switch, Router, or Hub
TereScope® - The Most Comprehensive Free Space Optics Wireless solution
Part number TS700/FE-O/V* TS700G/XYL/V*or TS700G/XYL/F*Model TS700/100 TS700/G or TS700/G-FStandard P.N. TS700/FE-O/V3 TS700G/M8L/VSApplications/Data Protocol
Fast Ethernet Gigabit-Ethernet, Fibre Channel
Performance Rate 100 Mbps 1.062Gbps & 1.25 GbpsRange @ 3 dB/km 1000 m 1100 m @ 5 dB/km 870 m 950 m @10 dB/km 670 m 730 m @17 dB/km 530 m 570 m @30 dB/km 390 m 425 mMinimum Range Less than 10m Less than10mBit error rate Less than 1E - 12 (unfaded)MTBF 10 years
Transmitter Light source 1 VCSELWavelength 830 - 860 nmTotal Output power 5 mW 16 mWBeam divergence 3.5 mrad 3.5 mrad
Receiver Detector Silicon Photodiode APDField of view 14 mrad 8 mradSensitivity -34 dBm -33 dBm
Interface Type 100Base Tx or Optical SFP (optional) MM/SM 1310nm LC SFP - Multimode (Single mode available upon request)
Connectors RJ45 (LC for the optical option) LCCable SFP (F/O for the optical option) Up to 220m length @ 62.5um
&Up to 500m length @ 50um
Wavelength 1310 nm (for the SFP option) 850 nm (other wavelengths available)Output power -17 +/-3 dBm (for the SFP) -3 to - 9.5 dBmReceiver operating range -14 +/-30 dBm (for the SFP) 0 to -17 dBmBuilt-in fusion Optional - Optical SFP port
Power Supplly Voltage range Factory set: 100 - 240 VAC @50/60 Hz or 24-60 VDC (V3 version)PoE (Power over Ethernet): In V3 version (Low voltage)
Factory set: 100 - 240 VAC @50/60 Hz or 24-60 VDC (V3 or F3 version)
Power consumption 15 WEnvironmentalInformation
Operating temperature -50˚ C to +60˚ C -30˚ C to +50˚ CStorage temperature -50˚ C to +70˚ C -50˚ C to +70˚ CHumidity 95% non-condensingHousing Weatherproofing: IP66Eye safety Class 1M
Mechanical Design
Dimensions (mm TereScope: 470 x 282 x 178Mounted on JAH-L: 470 x 282 x 355
Weight Unit 5 kgAccessories 5.5 kg
Diagnostics Indicators Airlink: Link, Data. 100BaseTX: Link, Data. Optical SFP (optional): Link, Data. Alignment mode, Loopback mode, Software mode, Laser status,
Management TX and RX, Receive Signal Strength (Digital Display)
Airlink: Flag, SFP main and redundant: Flag, Laser enabled, Alignment, Loopback mode, Fusion mode and activity, Software mode,
Management TX and RX, Receive Signal Strength (Digital Display)
Selectors Alignment, Loopback (local), Laser On/Off, Window Heater (if exists), Control Mode., Data Transmission
Alignment, Loopback (local), Signal attenuation (for short distance)Fusion activation, Data Rate, Control Mode.
Diagnostic 2 dry contacts (Airlink and FO Link) 4 dry contacts for: Airlink Flag, Fiber Optic Flag, Laser enabled and Power
Management SNMP hardware present in the product.SNMP software licenses: JT-SNMP-SW/B or JT-SNMP-SW/E: optional P.N of
the product including SNMP software license: TS700/FE-O/VM*: License for Basic version
TS700/FE-O/VE*: License for Extended version
JT-SNMP-SW/E included (SNMP Unit with web based software, extended version License)
StandardsCompliance
ITU G.703, G.704, G.706, G.736, G.737, G.738, G.739, G.742, G.775, G.823; EN50081-1: 1991; EN50082-1: 1998; EN55022: 1997; EN61000-4-2: 1995; EN61000-4-3: 1995; EN61000-4-4: 1995; EN61000-4-5: 1995/ ENV50142; EN61000-4-6: 1996/ENV50141; EN61000-4-8: 1993; EN61000-4-11: 1994; EN61000-3-2: 1995; IEC 950, 1991, A1, A2, A3, A4 ; EN 60950, 1992, A1, A2, A3, A4, A11 UL1950, 3rd Edition (1995) CSA 22.2, No. 950 (1995) ; Weatherproof: IP66
TereScope® 700 - Technical Specifications
TereScope 702 - Technical Specifications
Part number TS702/ETH/VSModel TS702/ETHStandard P.N. TS702/ETH/VSApplications/Data Protocol EthernetPerformance Rate 10Mbps
Range @ 3 dB/km 500 m @ 5 dB/km 450 m @10 dB/km 380 m @17 dB/km 320 m @30 dB/km 250 mMinimum Range 0 mBit error rate Better than 1E - 9 (unfaded)MTBF 10 years
Transmitter Light source 1 LEDWavelength 830 - 860 nmTotal Output power 5 mWBeam divergence 12 mrad
Receiver Detector Si PINField of view 14 mradSensitivity -42 dBm
Interface Type Copper - 10BaseTConnectors RJ45Cable STP
Power Supplly Voltage range 110 or 240 VAC onlyPower consumption 7W
EnvironmentalInformation
Operating temperature -50˚ C to +60˚ CStorage temperature -50˚ C to +70˚ CHumidity 95% non-condensingHousing Weatherproofing: IP66Eye safety Class 1M
Mechanical Design Dimensions (mm 430 x 216 x 290Weight Unit 3.5 kg
Accessories Diagnostics Indicators Airlink: Flag, Sync 100Base Tx: Flag, Sync. Receive Signal Strength (Digital Display) ManagementStandardsCompliance
ITU G.703, G.704, G.706, G.736, G.737, G.738, G.739, G.742, G.775, G.823; EN50081-1: 1991; EN50082-1: 1998; EN55022: 1997; EN61000-4-2: 1995; EN61000-4-3: 1995; EN61000-4-4: 1995; EN61000-4-5: 1995/ ENV50142; EN61000-4-6: 1996/ENV50141; EN61000-4-8: 1993; EN61000-4-11: 1994; EN61000-3-2: 1995; IEC 950, 1991, A1, A2, A3, A4 ; EN 60950, 1992, A1, A2, A3, A4, A11 UL1950, 3rd Edition (1995) CSA 22.2, No. 950 (1995) ; Weatherproof: IP66
TereScope® 702- Technical Specifications
MODEL/PROD CODE
TS1/ATS1/A/DST
TS1/CTS1/C/DST
Applications/Data Protocol
Fast Ethernet , 4xE1
Performance Rate 100 MbpsRange (1) @ 10 dB/km 280 m 550 m @ 17 dB/km 240 m 470 m @ 30 dB/km 200 m 360 m @ 60 dB/km 150 m 240 mMinimum Range 0 m 30 mBit error rate Less than 10E - 12 (unfaded)MTBF Over 10 years
Transmitter Light source 1x VCSELWavelength 850 nmTotal Output power 2.5 mW 3.5 mWBeam divergence 6 mrad 3.6 mradField of view 4.5 mrad 6 mradSensitivity -33dbmFiberoptic cable Custom MultimodeConnectors ST Max cable length 50 m Custom MM Cable
Power Supplly Voltage range Factory set: 100 - 240 VAC @50/60 Hz or 24-60 VDCPower consumption 6 W
EnvironmentalInformationOutdoor Unit
Operating temperature -40˚ C to +60˚ CStorage temperature -40˚ C to +60˚ CHumidity Less than 90% non-condensingHousing Weatherproof IP 65
Mechanical DesignOutdoor Units
Dimensions (mm) 248 x 155 x 375Weight (kg) Unit: 3 Kg - Accessories: 1.5 Kg
EnvironmentalInformationIndoor Unit
Operating temperature 0˚ C to +40˚ CStorage temperature -40˚ C to +70˚ CHumidity Less than 85% non-condensingEye safety Class 1M
Mechanical DesignIndoor Units
Dimensions (mm) 120 x 180 x 45Weight (kg) 0.6 Kg
(1) @17 dB/km = Moderate rain @30 dB/km = Blizzard, cloudburst @60 dB/km = Light to moderate fog
TereScope® 1 - Technical Specifications
TereScope® 1/ TereScope® 1000P - Fast Ethernet & Gigabit EthernetAll optics wireless The TereScope 1 (TS1) is an innovative solution for wireless optical communications without elec-tronics. The TS1 is an optical wireless system, which sits on rooftops and provides wireless fiber connection speeds without electronics or electricity power. TS1 responds to today’s as well as tomorrow’s user services demands, while providing higher potential capacity, license free trans-mission, at lower costs, over the air.
TereScope 1 Photonic Air Link (PAL) systems (outdoor head) are directly connected via optical fi-bers to the OptiSwitch® module that functions as the TereScope 1 network interface unit (NIU) or to the Media Converter MC102/p (indoor). Offering data rates of 1 Mbps to1.25 Gbps, at distances of up to 680 m, these systems avoid the need for costly and time-consuming fiber runs in devel-oped areas. Easy to install and align, these systems can be deployed almost instantly to expand your network as needed. Designed for short distance connectivity, and offered at low cost, TereScope® 1 is an ideal and highly reliable solution for dense urban areas and for Ethernet traffic based networks.
Features- Accommodates 1 Mbps to1.25 Gbps Mbps networks, for Fast Ethernet and Gigabit Ethernet - Distances up to 680 m- Immediate deployment- 100 Mbps or 1 Gbps Full Duplex transmission- Intrinsically EMI/RFI immune- No power needed on rooftop
Applications- Point-to-point LAN extension- Access connectivity- Difficult terrain- Fiber backup
MODEL/PROD CODE
TS1/1000 P/CTS1/C/GIGA/DST
Applications/Data Protocol
Gigabit Ethernet
Performance Rate 1 Gbps
Range (1) @10 dB/km 680 m
@17 dB/km 530 m
@30 dB/km 400 m
@60 dB/km 265 m
Minimum Range 0m (with attenuator). 120m w/o attenuator
Bit error rate Less than 10E - 12 (unfaded)
MTBF Over 10 years
Transmitter Light source 1x VCSEL
Wavelength 850 nm
Total Output power 12.5 mW
Beam divergence 2 mrad
Eye safety Class 1M
Receiver Field of view 2.4 mrad
Interface Connectors ST
Max cable length 50 m Custom MM Cable
Indoor Unit:Media converter
Part number MC102-SXGPALC/*
TX Power 12.5 mW
RX sensitivity -30 dBm
Power supply HV :100-240VAC 50/60Hz or LV: 24-60VDC
Connection to Giga-PAL ST Connectors
Connection to Network SC MM 850 nm (1000Base-SX)
EnvironmentalInformationOudoor Unit
Operating temperature -40˚ C to + 60˚ C
Storage temperature -40˚ C to + 60˚ C
Humidity Less than 90% non-condensing
EnvironmentalInformationIndoor Unit
Operating temperature 0˚ C to + 40˚ C
Storage temperature -40˚ C to +70˚ C
Humidity Less than 85% non-condensing
Mechanical Design Housing Weatherproofing: IP65
Dimensions (mm 410 x 244 x 325 mm 16.14x9.60x12.8 Inch
Weight 5.5 Kg/12.13lb including accessories
StandardsCompliance
Jitter Specifications proposed for SONET/SDH equipment defined by the Bellcore Specifications: GR-253-CORE, Issue 2, December 1995 and ITU-T Recommendations: G.958 document. Typical Applications: OC-1, STS-3, ATM, FDDI, E3, Fast Ethernet etc...EN50081-1: 1991; EN50082-1: 1998; EN55022: 1997; EN61000-4-2: 1995; EN61000-4-3: 1995; EN61000-4-4: 1995; EN61000-4-5:1995; ENV50142; EN61000-4-6: 1996/ENV50141; EN61000-4-8: 1993; EN61000-4-11: 1994; EN61000-3-2:1995; IEC950, 1991, A1, A2, A3, A4; EN60950, 1992, A1,A2,A3,A4,A11; FCC part 15 Class A; UL1950,3rd Edition (1995); CSA22.2, No.950 (1995) ;weather proofing IP66
(1)@ 3 dB/km = Light rain (5-10 mm/hr) - Light haze @ 5 dB/km = Light to medium rain (15-20 mm/hr) - Haze @10 dB/km = Medium to heavy rain (45 mm/hr) - Light snow - Thin fog @17 dB/km = Cloudburst (100 mm/hr) - Medium snow - Light fog @30 dB/km = Rain (up to 180 mm/hr) - Blizzard - Moderate fog
(*) Media Converter Power: for High Voltage: 2 for Low Voltage: 3
TereScope® 1000P/C - Technical Specifications
All Optical Wireless
Product part Model Protocols DescriptionActive TereScope ProductsTereScopes - 10 GigabitTS10GE/S3L/SHS TereScope10GE 10 Gigabit
Ethernet, STM64, OC-19210 GigabitFibre Channel
TereScope10GE, 9.95-11.3Gbps Free Space Optics link. 300m@30db/km and 350m@17db/km. XFP Single mode 1310nm interface. Internal heating. Each TereScope unit consists of an Optical head, Service Box and cabling between them. The Service Box includes Removable Modules: Power supply Module (** Power supply options: S or 3 - See below for power supply options explanation), Management Module (JT-SNMP-SW/E - SNMP Unit with web based software, extended version License), Interface Module and EDFA Module. Basic accessories kit supplied with the link: Aiming Head, JMP-G, Service box Stand and JITK-G (installer basic tools).
TereScopes - Up to Gigabit EthernetTS5000G/XYL/F** TereScope
5000/GEscon, 622Mbps, Fiber channel, Giga-Ethernet andothers between100 and 1500Mbps
TereScope 5000/G-F with built-in Fusion, 8 inch receiver Free Space Optics 870m@30db/km and 3500m@3db/km (clear weather), Open Protocol 100-1250Mbps with clock recovery, visual alignment. XYL coding: SFP interface options: M8L, S3L, S5L (Standard model: TS5000G/M8L/F1S). JT-SNMP-SW/E included (SNMP Unit with web based software, extended version License), Removable power supply, Redundant power supply: Optional. ** Power supply options: 1S, 2S, 13, 23, and 24 (See below for power supply options explanation). Basic accessories kit supplied with the link: AD-5000, JMP-8 and JITK. .
TS2000G/XYL/V* TereScope 2000/G
Gigabit Ethernet Fibre Channel
TereScope2000/G, Free Space Optics 680m@30db/km and 2300@3db/km (clear weather), Selectable Protocol Link: Giga-Ethernet and Fibre Channel, visual alignment. XYL coding: SFP interface options: M8L, S3L, S5L (Standard model: TS2000G/M8L/VS). JT-SNMP-SW/E included (SNMP Unit with web based software, extended version License). Power Supply S or 3 (see below for power supply options explanation). Basic accessories kit supplied with the link: JAH-8, JMP and JITK.
TS2000G/XYL/F* TereScope2000/G-F
TereScope2000/G-F with built-in Fusion, Free Space Optics 680m@30db/km and 2300@3db/km (clear weather), Selectable Protocol Link: Giga-Ethernet and Fibre Channel, visual alignment. XYL coding: SFP interface options: M8L, S3L, S5L (Standard model: TS2000G/M8L/FS). JT-SNMP-SW/E included (SNMP Unit with web based software, extended version License). Power Supply S or 3 (see below for power supply options explanation). Basic accessories kit supplied with the link: JAH-8, JMP and JITK.
TS700G/XYL/V* TereScope 700/G
TereScope700/G, Free Space Optics 425m@30db/km and 1100m@3db/km (clear weather), Selectable Protocol Link: Giga-Ethernet and Fibre Channel, visual alignment. XYL coding: SFP interface options: M8L, S3L, S5L (Standard model: TS700G/M8L/VS). JT-SNMP-SW/E included (SNMP Unit with web based software, extended version License). Power supply S or 3 (See below for power supply options explanation). Basic accessories kit supplied with the link: JAH-L, JMP and JITK.
TS700G/XYL/F* TereScope 700/G-F
TereScope700/G-F with built-in Fusion, Free Space Optics 425m@30db/km and 1100m@3db/km (clear weather), Selectable Protocol Link: Giga-Ethernet and Fibre Channel, visual alignment. XYL coding: SFP interface options: M8L, S3L, S5L (Standard model: TS700G/M8L/FS). JT-SNMP-SW/E included (SNMP Unit with web based software, extended version License). Power supply S or 3 (See below for power supply options explanation). Basic accessories kit supplied with the link: JAH-L, JMP and JITK.
TereScopes - 10 to 155 MbpsTS5000/XYL/F** TereScope
5000/155Fast Ethernet (100Mbps), ATM, OC3,STM1 (155Mbps), SMPTE (143Mbps), E3 (34Mbps), T3 (45Mbps), OC1/STM0 (52Mbps), and others between 10 and 155Mbps
TereScope5000/155-F with buil-in Fusion, 8 inch receiver Free Space Optics 1250m@30db/km and 5800m@3db/km (clear weather), Open Protocol 10-155Mbps with clock recovery, visual alignment. XYL coding: SFP interface options: M3L, S3L, S5L (Standard model: TS5000/M3L/F1S). JT-SNMP-SW/E included (SNMP Unit with web based software, extended version License), Removable Power supply, Redundant Power supply: Optional. ** Power supply options: 1S, 2S, 13, 23, 24 (See below for power supply options explanation). Basic accessories kit supplied with the link: AD-5000, JMP-8 and JITK.
TS4000/XYL/F** TereScope4000/155
TereScope4000/155-F with built-in Fusion, 8 inch receiver Free Space Optics 880m@30db/km and 3500m@3db/km (clear weather), Open Protocol 10-155Mbps with clock recovery, visual alignment. XYL coding: SFP interface options: M3L, S3L, S5L (Standard model: TS4000/M3L/F1S). JT-SNMP-SW/E included (SNMP Unit with web based software, extended version License), Removable Power supply, Redundant Power supply : Optional. **Power supply options: 1S, 2S, 13, 23, 24 (See below for power supply options explanation) . Basic accessories kit supplied with the link: AD-5000, JMP-8 and JITK.
TS800/XYL/V* TereScope800/155
TereScope800/155, Free Space Optics 600m@30db/km and 1900m@3db/km (clear weather), Open Protocol 10-155Mbps with clock recovery, visual alignment. XYL coding: SFP interface options: M3L, S3L, S5L (Standard model: TS800/M3L/VS), Fusion: optional. JT-SNMP-SW/B included (SNMP Unit with web based software, Basic version License) can be upgraded to JT-SNMP-SW/E (Extended version License). Power supply S or 3 (See below for power supply options explanation). Basic accessories kit supplied with the link: JAH-L, JMP and JITK.
TS800/XYL/VE* TereScope800/155
TereScope800/155, Free Space Optics 600m@30db/km and 1900m@3db/km (clear weather), Open Protocol 10-155Mbps with clock recovery, visual alignment. XYL coding: SFP interface options: M3L, S3L, S5L (Standard model: TS800/M3L/VES), Fusion: optional. JT-SNMP-SW/E included (SNMP Unit with web based software, Extended version License). Power supply S or 3 (See below for power supply options explanation). Basic accessories kit supplied with the link: JAH-L, JMP and JITK.
TS800/XYL/F* TereScope800/155-F
TereScope800/155-F with built-in Fusion, Free Space Optics 600m@30db/km and 1900m@3db/km (clear weather), Open Protocol 10-155Mbps with clock recovery, visual alignment. XYL coding: SFP interface options: M3L, S3L, S5L (Standard model: TS800/M3L/FS). JT-SNMP-SW/B included (SNMP Unit with web based software, Basic version License) can be upgraded to JT-SNMP-SW/E (Extended version License). Power supply S or 3 (See below for power supply options explanation). Basic accessories kit supplied with the link: JAH-L, JMP and JITK.
TS800/XYL/FE* TereScope800/155-F
TereScope800/155-F with built-in Fusion, Free Space Optics 600m@30db/km and 1900m@3db/km (clear weather), Open Protocol 10-155Mbps with clock recovery, visual alignment. XYL coding: SFP interface options: M3L, S3L, S5L (Standard model: TS800/M3L/FES). JT-SNMP-SW/E included (SNMP Unit with web based software, Extended version License). Power supply S or 3 (See below for power supply options explanation). Basic accessories kit supplied with the link: JAH-L, JMP and JITK.
TS800W/XYL/V* TereScope800/155-WB
TereScope800/155-WB, Free Space Optics 370m@30db/km and 860m@3db/km (clear weather), Wide Beam - 11mrad - for installations with large sway, Open Protocol 10-155Mbps with clock recovery, visual alignment. XYL coding: SFP interface options: M3L, S3L, S5L (Standard model: TS800W/M3L/VS), Fusion: optional. JT-SNMP-SW/B included (SNMP Unit with web based software, Basic version License) can be upgraded to JT-SNMP-SW/E (Extended version License). Power supply S or 3 (See below for power supply options explanation). Basic accessories kit supplied with the link: JAH-L, JMP and JITK.
TereScope® Fast Ethernet 100MbpsTS5000/FET/F** TereScope
5000/100Fast Ethernet (100 Mbps)
TereScope5000/100-F with built-in Fusion, 8 inch receiver Free Space Optics 1250m@30db/km and 5800m@3db/km (clear weather), Fast-Ethernet (100Mbps) link, 100BaseTX interface with an option for an Optical SFP interface (to be ordered separately). The PoE (Power over Ethernet) feature is included in the “3” (low voltage) version. (Standard model: TS5000/FET/F13). JT-SNMP-SW/E included (SNMP Unit with web based software, extended version License), Removable Power supply, Redundant Power supply: Optional. **Power supply options: 1S, 2S, 13, 24, 25, 26 (See below for power supply options explanation). Basic accessories kit supplied with the link: AD-5000, JMP-8, JITK and JPOE-X000 (PoE injector).
TS4000/FET/F** TereScope4000/100
TereScope4000/100-F with built-in Fusion, 8 inch receiver Free Space Optics 880m@30db/km and 3500m@3db/km (clear weather), Fast-Ethernet (100Mbps) link, 100BaseTX interface with an option for an Optical SFP interface (to be ordered separately). The PoE (Power over Ethernet) feature is included in the “3” (low voltage) version. (Standard model: TS4000/FET/F13). JT-SNMP-SW/E included (SNMP Unit with web based software, extended version License), Removable Power supply, Redundant Power supply: Optional. **Power supply options: 1S, 2S, 13, 24, 25, 26 (See below for power supply options explanation). Basic accessories kit supplied with the link: AD-5000, JMP-8, JITK and JPOE-X000 (PoE injector).
Ord
er In
form
atio
n
TS2000/FE-O/V* TereScope2000/100
TereScope2000/100, Free Space Optics 780m@30db/km and 2850m@3db/km (clear weather), Fast-Ethernet (100Mbps) link, 100BaseTX interface with an option for an Optical SFP interface (to be ordered separately), visual alignment. SNMP software JT-SNMP-SW/B or JT-SNMP-SW/E: optional (see P.Ns below this item). Power supply S or 3 (See below for power supply options explanation), The PoE (Power over Ethernet) feature is included in the 3 (low voltage) version and only the 100Base-TX port has to be used. (Standard Model: TS2000/FE-O/V3) Basic accessories kit supplied with the link: JAH-8, JMP and JITK.
TS2000/FE-O/VM* TereScope2000/100
TereScope2000/100, Free Space Optics 780m@30db/km and 2850m@3db/km (clear weather), Fast-Ethernet (100Mbps) link, 100BaseTX interface with an option for an Optical SFP interface (to be ordered separately), visual alignment. JT-SNMP-SW/B included (SNMP Unit with web based software, Basic version License) can be upgraded to JT-SNMP-SW/E (Extended version License). Power supply S or 3 (See below for power supply options explanation), The PoE (Power over Ethernet) feature is included in the 3 (low voltage) version and only the 100Base-TX port has to be used. (Standard Model: TS2000/FE-O/VM3) Basic accessories kit supplied with the link: JAH-8, JMP and JITK.
TS2000/FE-O/VE* TereScope2000/100
Fast Ethernet (100 Mbps)
TereScope2000/100, Free Space Optics 780m@30db/km and 2850m@3db/km (clear weather), Fast-Ethernet (100Mbps) link, 100BaseTX interface with an option for an Optical SFP interface (to be ordered separately), visual alignment. JT-SNMP-SW/E included (SNMP Unit with web based software, Extended version License). Power supply S or 3 (See below for power supply options explanation), The PoE (Power over Ethernet) feature is included in the 3 (low voltage) version and only the 100Base-TX port has to be used. (Standard Model: TS2000/FE-O/VM3) Basic accessories kit supplied with the link: JAH-8, JMP and JITK.
TS2000/FE-S/V* TereScope2000/100 + 2x Optical SFP Bundle, Free Space Optics 780m@30db/km and 2850m@3db/km (clear weather), Fast-Ethernet (100Mbps) link, Optical SFP interface, visual alignment. SNMP software JT-SNMP-SW/B or JT-SNMP-SW/E: optional (see P.Ns below this item). Power supply S or 3 (See below for power supply options explanation). (Standard Model: TS2000/FE-S/VS). Basic accessories kit supplied with the link: JAH-8, JMP and JITK.
TS800/FET/F* TereScope800/100-F
TereScope800/100-F with built-in Fusion, Free Space Optics 600m@30db/km and 1900m@3db/km (clear weather), Fast-Ethernet (100Mbps) link, 100BaseT interface. Power supply S or 3 (See below for power supply options explanation), The PoE (Power over Ethernet) feature is included in the 3 (low voltage) version. (Standard model: TS800/FET/F3). JT-SNMP-SW/B included (SNMP Unit with web based software, Basic version License) can be upgraded to JT-SNMP-SW/E (Extended version License). Basic accessories kit supplied with the link: JAH-L, JMP and JITK.
TS800/FET/FE* TereScope800/100-F
TereScope800/100-F with built-in Fusion, Free Space Optics 600m@30db/km and 1900m@3db/km (clear weather), Fast-Ethernet (100Mbps) link, 100BaseT interface. Power supply S or 3 (See below for power supply options explanation), The PoE (Power over Ethernet) feature is included in the 3 (low voltage) version. (Standard model: TS800/FET/F3). JT-SNMP-SW/E included (SNMP Unit with web based software, Extended version License). Basic accessories kit supplied with the link: JAH-L, JMP and JITK.
TS800W/FET/F* TereScope800/100F-WB
TereScope800/100F-WB with built-in Fusion, Free Space Optics 370m@30db/km and 860m@3db/km (clear weather), Wide Beam - 11mrad - for installations with large sway, Fast-Ethernet (100Mbps) link, 100BaseT interface. Power supply S or 3 (See below for power supply options explanation), The PoE (Power over Ethernet) feature is included in the 3 (low voltage) version. (Standard model: TS800W/FET/F3). JT-SNMP-SW/B included (SNMP Unit with web based software, Basic version License) can be upgraded to JT-SNMP-SW/E (Extended version License). Basic accessories kit supplied with the link: JAH-L, JMP and JITK.
TS700/FE-O/V* TereScope700/100
TereScope700/100, Free Space Optics 390m@30db/km and 1000m@3db/km (clear weather), Fast-Ethernet (100Mbps) link, 100BaseTX interface with an option for an Optical SFP interface (to be ordered separately), visual alignment. SNMP software JT-SNMP-SW/B or JT-SNMP-SW/E: optional (see P.Ns below this item). Power supply S or 3 (See below for power supply options explanation), The PoE (Power over Ethernet) feature is included in the 3 (low voltage) version and only the 100Base-TX port has to be used. (Standard Model: TS700/FE-O/V3). Basic accessories kit supplied with the link: JAH-L, JMP and JITK.
TS700/FE-O/VM* TereScope700/100
TereScope700/100, Free Space Optics 390m@30db/km and 1000m@3db/km (clear weather), Fast-Ethernet (100Mbps) link, 100BaseTX interface with an option for an Optical SFP interface (to be ordered separately), visual alignment. JT-SNMP-SW/B included (SNMP Unit with web based software, Basic version License) can be upgraded to JT-SNMP-SW/E (Extended version License). Power supply S or 3 (See below for power supply options explanation), The PoE (Power over Ethernet) feature is included in the 3 (low voltage) version and only the 100Base-TX port has to be used. (Standard Model: TS700/FE-O/VM3). Basic accessories kit supplied with the link: JAH-L, JMP and JITK.
TS700/FE-O/VE* TereScope700/100
TereScope700/100, Free Space Optics 390m@30db/km and 1000m@3db/km (clear weather), Fast-Ethernet (100Mbps) link, 100BaseTX interface with an option for an Optical SFP interface (to be ordered separately), visual alignment. JT-SNMP-SW/E included (SNMP Unit with web based software, Extended version License). Power supply S or 3 (See below for power supply options explanation), The PoE (Power over Ethernet) feature is included in the 3 (low voltage) version and only the 100Base-TX port has to be used. (Standard Model: TS700/FE-O/VM3). Basic accessories kit supplied with the link: JAH-L, JMP and JITK.
TS700/FE-S/V* TereScope700/100
TereScope700/100 + 2x Optical SFP Bundle, Free Space Optics 390m@30db/km and 1000m@3db/km (clear weather), Fast-Ethernet (100Mbps) link, Optical SFP interface, visual alignment. SNMP software JT-SNMP-SW/B or JT-SNMP-SW/E: optional (see P.Ns below this item). Power supply S or 3 (See below for power supply options explanation). (Standard Model: TS700/FE-S/VS). Basic accessories kit supplied with the link: JAH-L, JMP and JITK.
TereScope®- Ethernet, 10MbpsTS702/ETH/VS TereScope
702Ethernet (10Mbps)
TereScope702/ETH (“EtherLight”) ,Free Space Optics 250m@30db/km ETHERNET Link , 10 Mbit/s (RJ45), visual alignment. Power supply V1 and V2 (user selectable)*. Basic accessories kit supplied with the link:JMP.
TS800/ETH/V* TereScope800/ETH
TereScope800/ETH, Free Space Optics 610m@30db/km and 2000m@3db/km (clear weather), ETHERNET Link, 10 Mbit/s (RJ45), visual alignment. RSM-SNMP/700: optional. Power supply S or 3 (See below for power supply options explanation), Important Remark: This model can be powered via standard data cable (CAT 5, RJ48 Connector) - to be specified with order. Basic accessories kit supplied with the link:JMP.
TS4000/ETH/V* TereScope4000/ETH
TereScope4000/ETH, 8 inch receiver Free Space Optics 1130m@30db/km and 5000m@3db/km (clear weather), ETHERNET Link , 10 Mbit/s, (RJ45), visual alignment. RSM-SNMP: optional. Removable Power supply, Power supply S or 3 (See below for power supply options explanation). Basic accessories kit supplied with the link: AD-5000, JMP-8 and JITK.
TS5000/ETH/V* TereScope5000/ETH
TereScope5000/ETH, 8 inch receiver Free Space Optics 1460m@30db/km and 7000m@3db/km (clear weather), ETHERNET Link , 10 Mbit/s, (RJ45), visual alignment. RSM-SNMP included, Removable Power supply, Power supply S or 3 (See below for power supply options explanation). Basic accessories kit supplied with the link: AD-5000, JMP-8 and JITK.
TereScope® E1 or T1TereScope® E1 LinksTS800/E1/V* TereScope
800/E1E1
(2.048Mbps)TereScope800/E1, Optical Wireless 750m@30db/km and 2800m@3db/km (clear weather), E1 Link, G.703/G.704, Interface RJ48, visual alignment. RSM-SNMP/700: optional. Power supply S or 3 (See below for power supply options explanation). Important Remark: This model can be powered via standard data cable (CAT 5, RJ48 Connector) - to be specified with order. Basic accessories kit supplied with the link: JMP.
TS2000/E1/V* TereScope2000/E1
TereScope2000/E1 , Free Space 880m@30db/km and 3400m@3db/km (clear weather), E1 Link, G.703/G.704, Interface: Universal connector to be used with 75 Ohm (Coax) or 120 Ohm (STP), visual alignment. RSM-SNMP/700: optional. Power supply S or 3 (See below for power supply options explanation). Important Remark: This model can be powered via standard data cable (CAT 5) - to be specified with order. Basic accessories kit supplied with the link: JAH-8, JMP and JITK.
TS4000/E1/V* TereScope4000/E1
TereScope4000/E1 , Free Space 1220m@30db/km and 5500m@3db/km (clear weather), E1 Link, G.703/G.704, Interface: Universal connector to be used with 75 Ohm (Coax) or 120 Ohm (STP), visual alignment. RSM-SNMP: optional. Removable Power supply, Power supply S or 3 (See below for power supply options explanation). Basic accessories kit supplied with the link: AD-5000, JMP-8 and JITK.
TereScope® T1 LinksTS800/T1/V* TereScope
800/T1T1 (1.55Mbps) TereScope800/T1, Optical Wireless 750m@30db/km and 2800m@3db/km (clear weather), T1 Link, G.703/
G.704, Interface RJ48, visual alignment. RSM-SNMP/700: optional. Power supply S or 3 (See below for power supply options explanation). Important Remark: This model can be powered via standard data cable (CAT 5, RJ48 Connector) - to be specified with order. Basic accessories kit supplied with the link: JMP.
Ord
er In
form
atio
n
TS2000/T1/V* TereScope2000/T1
TereScope2000/T1 , Free Space 880m@30db/km and 3400m@3db/km (clear weather), T1 Link, G.703/G.704, Interface: Universal connector to be used with 75 Ohm (Coax) or 120 Ohm (STP), visual alignment. RSM-SNMP/700: optional. Power supply S or 3 (See below for power supply options explanation). Important Remark: This model can be powered via standard data cable (CAT 5) - to be specified with order. Basic accessories kit supplied with the link: JAH-8, JMP and JITK.
TS4000/T1/V* TereScope4000/T1
TereScope4000/T1 , Free Space 1220m@30db/km and 5500m@3db/km (clear weather), T1 Link, G.703/G.704, Interface: Universal connector to be used with 75 Ohm (Coax) or 120 Ohm (STP), visual alignment. RSM-SNMP: optional. Removable Power supply, Power supply S or 3 (See below for power supply options explanation). Basic accessories kit supplied with the link: AD-5000, JMP-8 and JITK.
TereScope® - MUX, 4E1 or 4T1 TereScope® 4E1 LinksTS800/4E1/V* TereScope
800/4E14x E1
(4x2.048Mbps)TereScope800/4E1 , Free Space Optics 610m@30db/km and 2000m@3db/km (clear weather), 4E1 Link, G.703 inputs, Interface RJ48, visual alignment. RSM-SNMP/700: optional. Power supply S or 3 (See below for power supply options explanation). Basic accessories kit supplied with the link: JMP.
TS2000/4E1/V* TereScope2000/4E1
TereScope2000/4E1 , Free Space 740m@30db/km and 2750m@3db/km (clear weather), 4E1 Link, G.703/G.704, Interface: Universal connector to be used with 75 Ohm (Coax) or 120 Ohm (STP), visual alignment. RSM-SNMP/700: optional. Power supply S or 3 (See below for power supply options explanation). Basic accessories kit supplied with the link: JAH-8, JMP and JITK.
TS4000/4E1/V* TereScope4000/4E1
TereScope4000/4E1 , Free Space 1130m@30db/km and 5000m@3db/km (clear weather), 4E1 Link, G.703/G.704, Interface: Universal connector to be used with 75 Ohm (Coax) or 120 Ohm (STP), visual alignment. RSM-SNMP: optional. Removable Power supply, Power supply S or 3 (See below for power supply options explanation). Basic accessories kit supplied with the link: AD-5000, JMP-8 and JITK.
TS5000/4E1/V* TereScope5000/4E1
TereScope5000/4E1, Free Space 1460m@30db/km and 7000m@3db/km (clear weather), 4E1 Link, G.703/G.704, Interface: 4 Universal connectors to be used with 75 Ohm (Coax) or 120 Ohm (STP), visual alignment. RSM-SNMP included, Removable Power supply, Power supply S or 3 (See below for power supply options explanation). Basic accessories kit supplied with the link: AD-5000, JMP-8 and JITK.
TereScope® 4T1 LinksTS800/4T1/V* TereScope
800/4T14x T1
(4x 1.55Mbps)TereScope800/4T1, Free Space Optics 610m@30db/km and 2000m@3db/km (clear weather), 4T1 Link, G.704 inputs, Interface RJ48, visual alignment. RSM-SNMP/700: optional. Power supply S or 3 (See below for power supply options explanation). Basic accessories kit supplied with the link: JMP.
TS2000/4T1/V* TereScope2000/4T1
TereScope2000/4T1 , Free Space 740m@30db/km and 2750m@3db/km (clear weather), 4T1 Link, G.703/G.704, Interface: Universal connector to be used with 100 Ohm STP cable, visual alignment. RSM-SNMP/700: optional. Power supply S or 3 (See below for power supply options explanation). Basic accessories kit supplied with the link: JAH-8, JMP and JITK.
TS4000/4T1/V* TereScope4000/4T1
TereScope4000/4T1, Free Space 1130m@30db/km and 5000m@3db/km (clear weather), 4T1 Link, G.703/G.704, Interface: Universal connector to be used with 100 Ohm STP cable, visual alignment. RSM-SNMP: optional. Removable Power supply, Power supply S or 3 (See below for power supply options explanation). Basic accessories kit supplied with the link: AD-5000, JMP-8 and JITK.
TS5000/4T1/V* TereScope5000/4T1
TereScope5000/4T1 , Free Space 1460m@30db/km and 7000m@3db/km (clear weather), 4T1 Link, G.703/G.704, Interface: 4 Universal connectors to be used with 100 Ohm STP cable, visual alignment. RSM-SNMP included, Removable Power supply, Power supply S or 3 (See below for power supply options explanation). Basic accessories kit supplied with the link: AD-5000, JMP-8 and JITK.
Power Supply OptionsGeneral
Each product base code ends with * or **. * means that the product has one power supply. **means that the product can have two power supplies: one main and the other one - for back-up. In the products description, is a list of all compatible power supplies. When ordering, please specify the required power supply and make sure that it is in the above list. For example, if a TS4000/155 with one power supply, high voltage (100-240VAC) is required, TS4000/XYL/V1S should be ordered. Similarly, in case of 2 power supplies low voltage (24-60VDC) are request, the p/n will be TS4000/XYL/V23. If the required product can have only one power supply, for example TS700/G, high voltage, the p/n will be TS700G/XYL/VS. The TSX000/FET/F** default Power Supply is POE (High Power over Ethernet) version and can be fed also with a 48VDC non PoE (and not 24-60VDC).
TereScope® FusionTS-FUSION Upgrade the TereScope by adding the Fusion option. The Fusion option will be opened by a License key.
The license is given for a specific MAC address. (The price doesn’t include the SFPs)
Single TereScope® Unit (1 terminal) T-x/x/x/V* To order a single TereScope terminal (transceiver), please use same products code, but REPLACE the TS with
T-. For example TereScope4000/155 with 1 power supply High voltage (100-240VAC) code is TS4000/M3L/V1S to be T-4000/M3L/V1S. This single unit is supplied without any accessories. 50% of the link price (after deducting accessories price).
THxxx/xx/V* To order a single TereScope terminal (transceiver) with accessories, please use same products code, but REPLACE the TS with TH (Terescope Head) . For example TereScope4000/155 with 1 power supply Low voltage (24-60VDC) code is TS4000/M3L/V13 to be TH4000/M3L/V13. this single unit is supplied with all standard accessories. 50% of the link price.
Management**JT-SNMP-SW/B License for the TereScope Web based SNMP Software, Basic Version. This version enables monitoring
the TereScope head. A code is supplied in order to activate the SNMP software. The license is given for a specific MAC address.
JT-SNMP-SW/E License for the TereScope Web based SNMP Software, Extended Version. This version enables monitoring, controling and managing the TereScope head. A code is supplied in order to activate the SNMP software. The license is given for a specific MAC address.
JT-SNMP-SW/UP Upgrade the TereScope SNMP software License from the Basic version to the Extended Version. The license is given for a specific MAC address.
Passive TereScope ProductsTereScope 1000P/C - Gigabit EthernetBundlesTS1G/C/BDL/25/A TS1000P/C
BundleGigabit-Ethernet
TereScope 1000P/C bundle, consists of two transceiver heads TS1/C/GIGA/DST + two FO-25/PALG/B 25 meter fiberoptic cable + two MC102-SXGPALC/2 1000 Base SX to PAL converters for TS1/C/GIGA/DST, 100-240 VAC
TS1G/C/BDL/25/D TereScope 1000P/C bundle, consists of two transceiver heads TS1/C/GIGA/DST + two FO-25/PALG/B 25 meter fiberoptic cable + two MC102-SXGPALC/3 1000 Base SX to PAL converters for TS1/C/GIGA/DST, 24-60 VDC
TS1G/C/BDL/50/A TereScope 1000P/C bundle, consists of two transceiver heads TS1/C/GIGA/DST + two FO-50/PALG/B 50 meter fiberoptic cable + two MC102-SXGPALC/2 1000 Base SX to PAL converters for TS1/C/GIGA/DST, 100-240 VAC
TS1G/C/BDL/50/D TereScope 1000P/C bundle, consists of two transceiver heads TS1/C/GIGA/DST + two FO-50/PALG/B 50 meter fiberoptic cable + two MC102-SXGPALC/3 1000 Base SX to PAL converters for TS1/C/GIGA/DST, 24-60 VDC
TereScope1- Fast Ethernet, 100MbpsBundlesTS1/A/BDL/MC TS1/A Bundle Fast-Ethernet
(100Mbps)Bundle consist of - TS1/A/DST + 2x MC-102/P/A + 2x FO-25/PAL/UNI.
TS1/C/BDL/MC TS1/C Bundle Bundle consist of - TS1/C/DST + 2x MC-102/P/C + 2x FO-25/PAL/UNI.TS1/A/BDL/MM TS1/A Bundle Bundle consist of - TS1/A/DST + 2x MM04E112/APAL1 + 2x FO-25/PAL/UNI.TS1/C/BDL/MM TS1/C Bundle Bundle consist of - TS1/C/DST + 2x MM04E112/CPAL1 + 2x FO-25/PAL/UNI.
��� ����� ����� ��������� �������� ���
����������� �� �����������������������������
��� ����� ����� ������� ������ ���
���������� �� �����������������������������
��� ������������������������ ���� ����������
���������������� ������� �������������������
����������� ���� ���������
���� ���� ������������
��� ��� ���� ���� �� ������� ���������� ��� ������ ���������� ����� �������� ��� ��� ������� ��� ������ �� ������������������ ������ �� �� ������������� �� ���� �� ��� �����������
��� ����������� ��������� ����������� ��� ��������������� ������� �� ��� �������� ������ ��� ����� ���� ����������� �������� �� �� �������� �� ��������� �������� ��� �������� �� ������������������� �� ��� ����������� ��� �� �������������� �� ������� ��� ��� ������������� ������ ������� ��� �������������� ��� ���� ������������ ��� �������������� ��� ��� ��� ������������������ ��� ���������� �� ��� ��������������� ���� ����� ���������� ��� ��� �������� �� ����� ���������� ��������
Copyright ©2009 MRV Communications, Inc. All Rights Reserved.MRV- TS BrochureRev.3 08-09
** The management products indicated above are used with an individual unit.
Ord
er In
form
atio
n