AG106 CP105 FLUX-1802-D FLUX-1802-PF BRAZING ALLOYS & SILVER SOLDER PART ROD Ø WEIGHT MELTING SILVER NUMBER (gram) (°C RANGE) (%) CP105 2 500 645 / 825 2 CP104 2 500 645 / 815 5 CP102 2 500 645 / 800 15 AG106 2 250 630 / 730 34 AG104 2 250 640 / 680 45 RB-4240 2 200 600 / 690 30 Certified EN 1044 Cadmium-free 1. PLAIN SILVER ALLOY RODS AUTO-FLUX BRAZING DESCRIPTION • These BRAZING ALLOYS are used for joining copper, especially for REFRIGERATION and AIR-CONDITIONING. • May also be used for joining brass to copper with the use of FLUX (no flux is required when brazing copper to copper). • With 5% SILVER ALLOY: Lower melting temperature than that of 0%. Addition of silver makes it more manageable. • With 15% SILVER ALLOY: More silver and less phosphorus gives a low brazing temperature for better control with excellent fill capabilities. The most preferred because its versatility. • With 30% and 40% SILVER ALLOY: Good strength and ductibility. Flows in a sluggish manner making it suitable for loose fittings. For general purpose brazing with a lower silver content making it the most economical cadmium alloys. • With 45 and 56% SILVER ALLOY: Additional silver content gives this alloy a high degree of versatility and extreme thin flowing. Has a very high tensile strength and is especially suitable for joining dissimilar metals. PART DESCRIPTION WEIGHT °C TEMP. NUMBER (gram) (Range) FLUX-800-D Powder for 800 & 806 200 500 / 850 FLUX-1802-D Powder for 1020, 1802 200 500 / 780 & 4240 FLUX-1802-PF Soft paste 200 500 / 850 2. BRAZING SCOURING FLUXES SEE ALSO: • “SOLDERLENE” PASTE FLUX • “HEAT SEAL STICK” SOLDER • “BLOCK- ITE” HEAT ABSORBER

BRAZING ALLOYS & SILVER SOLDERREFRIGERATION and AIR-CONDITIONING. • May also be used for joining brass to copper with the use of FLUX (no flux is required when brazing copper to

Download PDF Report

Upload
others
View
1
Download
0

Embed Size (px)

Citation preview

AG106

CP105

FLUX-1802-D FLUX-1802-PF

BRAZING ALLOYS & SILVER SOLDER

PART ROD Ø WEIGHT MELTING SILVER NUMBER (gram) (°C RANGE) (%)

CP105 2 500 645 / 825 2CP104 2 500 645 / 815 5CP102 2 500 645 / 800 15

AG106 2 250 630 / 730 34AG104 2 250 640 / 680 45

RB-4240 2 200 600 / 690 30

Certified EN 1044Cadmium-free

1. PLAIN SILVER ALLOY RODS AUTO-FLUX BRAZING

DESCRIPTION•TheseBRAZING ALLOYSareusedforjoiningcopper,especially

forREFRIGERATION andAIR-CONDITIONING.•MayalsobeusedforjoiningbrasstocopperwiththeuseofFLUX

(nofluxisrequiredwhenbrazingcoppertocopper).•With 5% SILVER ALLOY:Lowermeltingtemperaturethanthatof

0%.Additionofsilvermakesitmoremanageable.•With 15% SILVER ALLOY: More silver and less phosphorus

givesalowbrazingtemperatureforbettercontrolwithexcellentfillcapabilities.Themostpreferredbecauseitsversatility.

•With 30% and 40% SILVER ALLOY:Goodstrengthandductibility.Flows inasluggishmannermaking itsuitable for loose fittings.Forgeneralpurposebrazingwithalowersilvercontentmakingitthemosteconomicalcadmiumalloys.

•With 45 and 56% SILVER ALLOY:Additionalsilvercontentgivesthis alloy a high degree of versatility and extreme thin flowing.Has a very high tensile strength and is especially suitable forjoiningdissimilarmetals.

PART DESCRIPTION WEIGHT °C TEMP. NUMBER (gram) (Range)

FLUX-800-D Powderfor800 & 806 200 500 / 850 FLUX-1802-D Powderfor1020, 1802 200 500 / 780 & 4240 FLUX-1802-PF Softpaste 200 500/850

2. BRAZING SCOURING FLUXES

SEE ALSO: • “SOLDERLENE”PASTE FLUX• “HEATSEALSTICK”SOLDER• “BLOCK-ITE”HEATABSORBER
http://www.ite-tools.com/en/product/700291http://www.ite-tools.com/en/product/700293http://www.ite-tools.com/en/product/700290http://www.ite-tools.com/en/product/700292http://www.ite-tools.com/en/product/700294http://www.ite-tools.com/en/product/700279http://www.ite-tools.com/en/product/700264http://www.ite-tools.com/en/product/700269http://www.ite-tools.com/en/product/700271