Blade LiteBLD-LT-600BLD-LT-920BLD-LT-1200BLD-LT-1500

Blade Lite is an attractive, sleek stand in anodized silver with chrome endcaps and a streamlined base design. With four base widths to choose from, there is a Blade Lite to fit every space. dimensions:

additional information:

- Comes complete with base, premium toprail, three-piece bungee pole(s) and carry bag- Four sizes to choose from: 600, 920, 1200 and 1500mm wide

features and benefits:- Weighted base for stability- Adjustable leveling feet- Protective foam padding in bag- Lifetime hardware warranty against manufacturer defects

Assembled unit: 600mm: 25.5”w x 8.62”d x 86”h647.69mm(w) x 219.07mm(d) x 2184.4mm(h)

920mm: 38”w x 8.62”d x 86”h965.19mm(w) x 219.07mm(d) x 2184.4mm(h)

1200mm: 49”w x 8.62”d x 86”h1244.6mm(w) x 219.07mm(d) x 2184.4mm(h)

1500mm: 61”w x 8.62”d x 86”h1549.39mm(w) x 219.07mm(d) x 2184.4mm(h)

Visible dimensions:600mm: 23.5”w x 83.25”h596.9mm(w) x 2114.5mm(h)

920mm: 36”w x 83.25”h914.4(w) x 2114.5mm(h)

1200mm: 47.25”w x 83.25”h1200.1mm(w) x 2114.5mm(h)

1500mm: 59”w x 83.25”h1498.6mm(w) x 2114.5mm(h)

Refer to related graphic template for more information

Hardware

We are continually improving and modifying our product range and reserve the right to vary the specifications without prior notice. All dimensions and weights quoted are approximate and we accept no responsibility for variance. E&OE. See Graphic Templates for graphic bleed specifications.

Graphic

Graphic materials:13 oz flatmaxx vinyl or oxford fabric

Pole heights for the Blade 600:1 pole: 21”2 pole: 41.5”3 pole: 62.5”4 pole: 83.25”

Pole heights for remaining blade lites:1 pole: 27.75”2 pole: 55.5”3 pole: 83.25”

Shipping

Shipping dimensions - ships in one box600mm: 29.53”l x 9.84”w x 4.92”h750.062mm(l) x 249.94mm(w) x 124.97mm(h)

920mm: 41.73”l x 9.84”w x 4.92”h1059.94mm(l) x 249.94mm(w) x 124.97mm(h)

1200mm: 53.15”l x 9.84”w x 4.92”h1350.01mm(l) x 249.94mm(w) x 124.97mm(h)

1500mm: 64.96”l x 9.84”w x 4.92”h1649.98mm(l) x 249.93mm(w) x 124.97mm(h)

Approximate shipping weight:600mm: 6.72lbs/3.05kg

920mm: 12.12lbs/5.5kg

1200mm: 14.33lbs/6.5kg

1500mm: 18.47lbs/8.4kg

Stand is supplied with premium top rail including both gripper and adhesive options, we recommend use of clamp rail

Blade Lite 600 and 920 are supplied with one bungee pole per unit while 1200 and 1500 come with two bungee poles per unit

6/4/12

Blade Lite 920 Blade Lite 1500Blade Lite 1200Blade Lite 600

Graphic to toprail attachment (metal insert)

Blade Lite set-up

Remove adhesive backing from the rail

Secure pole(s) in the base of stand

Loosen each screw from the rail using provided allen key and remove metal insert (do not remove screws)

Peel film to expose adhesive; place metal insert from graphic rail on top back side of graphic point

Assemble three piece bungee pole(s) 1 2 3 4

1 2 3 4

Insert the metal insert with graphic attached into the top graphic profile rail

Gently lean the unit back and pull the graphic up by the toprail Leveling feet located under unit

metal insert

metal insert

metal insert

5

Tighten the screws back in place to hold metal insert and graphic with an allen key 1

Quick slide top rail attachment (plastic insert)

2 3Remove top slider from graphic railRemove film to expose adhesive on top slider

Align and apply to top slider on the top front of graphic

top slider

printed side down

2 3

Place additional masking tape to the back of the graphic for extra protection

5 6

Remove pin while holding onto the graphic so the graphic does not retract back in quickly

1

Line the bottom of the back of the graphic print with adhesive tape on white leader strip

Graphic to base attachment

4Insert graphic onto graphic rail

Slowly retract the graphic back into the base

Once aligned pull adhesive tape slowly while applying pressure to graphic to adhere tape

top rail slider

graphic back

graphic front

Check out these related products:

Orient Orient 2

Blok

Blade LX

ElevateLumina 2