BIS Salamis Rigging Brochure

A 1/2" ChokerClamp should beattached to astructural memberat the midpoint ofthe system andattached to the1/2" board. Forexample, a 50'

cable run-midpoint support choker in excess of 50' cable runneeds two chokers spaced evenly.

BOCO CABLE RIGGING SYSTEM

BOCO CABLE RIGGINGACCESS SYSTEM

Overview of System• Independent Moon Clamps attached to structural I-Beams.• 1/2" Cable for supporting stage boards and nets.• Boards & nets supported on separate cables.• Horizontal Lifeline System supported from separate

clamps & cable.• System installed using Spider ST-17.• Needle Beams used for access to small areas.• Aluminum stage boards and OSHA wooden boards used

as access platforms.

Boco Rigging System• Moon Clamps set at 22ft. Centers for primary cables tosupport boards.• Moon Clamps set at 18ft. Centers for safety nets.• 1/2" Cable attached to Moon Clamps over a max. distanceof 50ft. span.• Aluminum staging boards attached to primary support cablesusing safety hooks.• Safety nets attached using safety hooks to secondary cables.• 3 x Horizontal lifeline cables at 6ft. Centers attached toseparate clamps.• Maximum of 2 x personnel working on system at one time.

Needle Beams• 2.5" square tubing by 10' or 4' long with pad eyes welded at each end.• Hung from structural members using Min. 3/8" cable.• Permanent termination to padeye.• Adjustable termination for connection to structural steelwork.• Span between needle beams dependent upon type of

boarding used.• System designed for maximum loading of 800lbs.• System installed using combination of Spiders and rigging

personnel.

ST-17 Spider• Deemed suitable for man riding purposes by universal

underwriter laboratories.• Independently Load tested.• Personnel connected to certified 5/8" safety rope and

rope grab providing an independent fall protection system.• Spider capable of moving along beams using unique

beam clamps which form part of the integral system.

Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2.000Shackle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6.900Snatch Block . . . . . . . . . . . . . . . . . . . . . . . . . . . .6.200Pin Bearing Stress . . . . . . . . . . . . . . . . . . . . . . .7.500Pin Shear Tear-out Stress . . . . . . . . . . . . . . . . . .4.100Needle Beam Bending Stress . . . . . . . . . . . . . . .3.740Horizontal Lifeline Clamp . . . . . . . . . . . . . . . . .2.020Overall System (minimum) . . . . . . . . . . . . . . . . .2.000

Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2.275Shackle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7.847Snatch Block . . . . . . . . . . . . . . . . . . . . . . . . . . .7.098Pin Bearing Stress . . . . . . . . . . . . . . . . . . . . . . .8.300Pin Shear Tear-out Stress . . . . . . . . . . . . . . . . . .7.465Moon Clamp . . . . . . . . . . . . . . . . . . . . . . . . . . .2.000Needle Beam Bending Stress . . . . . . . . . . . . . . .3.740Overall System (minimum) . . . . . . . . . . . . . . . .2.000


• Surface preparation(conventional abrasive and UHP water jetting)

• Coating Application

• Inspection and testing

• Insulation installation, removal and repair

• Passive fire protection installation, removal and repair

• Mechanical/electrical repair and maintenance

• Decommissioning

Horizontal Lifeline System• Independent clamps connected to structural steel.

1/2" cable support line.• Maximum system span of 50ft. (with intermediate choker).• Personnel hooked onto horizontal lifeline system using full

body harness and double lanyards.• Spider used as a Rescue System.• Horizontal lifeline systems set at 6ft. Centers to ensure

100% hook-up.

salamis services inc.

Aluminum Staging and OSHA Boards• 24ft. X 2ft. aluminum staging boards with a working

load of 500 lbs. (2 x personnel).• 14ft. X 1ft. Flame retardant laminated wood OSHA boards.• Maximum loading on boards to comply with

manufacturers recommendations.• OSHA boards to be connected to needle beams using

rope lashings with cleats.• Correct manual handling techniques to be used when

lifting or carrying boards.

FACTORS OF SAFETY FACTORS OF SAFETY

Horizontal Lifeline System Moon Clamp System

SYSTEM APPLICATIONSSYSTEM APPLICATIONS

MAINASSEMBLY

HLL LIVEEND CLAMP

HHL DEADEND CLAMP

LIVE ENDMOON CLAMP

DEADEND

MOONCLAMP

NEEDLE

NEEDLEBEAM

Choker Cables

A 1/2" ChokerClamp should beattached to astructural memberat the midpoint ofthe system andattached to the1/2" board. Forexample, a 50'

cable run-midpoint support choker in excess of 50' cable runneeds two chokers spaced evenly.



Overview of System• Independent Moon Clamps attached to structural I-Beams.• 1/2" Cable for supporting stage boards and nets.• Boards & nets supported on separate cables.• Horizontal Lifeline System supported from separate

clamps & cable.• System installed using Spider ST-17.• Needle Beams used for access to small areas.• Aluminum stage boards and OSHA wooden boards used

as access platforms.

Boco Rigging System• Moon Clamps set at 22ft. Centers for primary cables tosupport boards.• Moon Clamps set at 18ft. Centers for safety nets.• 1/2" Cable attached to Moon Clamps over a max. distanceof 50ft. span.• Aluminum staging boards attached to primary support cablesusing safety hooks.• Safety nets attached using safety hooks to secondary cables.• 3 x Horizontal lifeline cables at 6ft. Centers attached toseparate clamps.• Maximum of 2 x personnel working on system at one time.

Needle Beams• 2.5" square tubing by 10' or 4' long with pad eyes welded at each end.• Hung from structural members using Min. 3/8" cable.• Permanent termination to padeye.• Adjustable termination for connection to structural steelwork.• Span between needle beams dependent upon type of

boarding used.• System designed for maximum loading of 800lbs.• System installed using combination of Spiders and rigging

personnel.

ST-17 Spider• Deemed suitable for man riding purposes by universal

underwriter laboratories.• Independently Load tested.• Personnel connected to certified 5/8" safety rope and

rope grab providing an independent fall protection system.• Spider capable of moving along beams using unique

beam clamps which form part of the integral system.

Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2.000Shackle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6.900Snatch Block . . . . . . . . . . . . . . . . . . . . . . . . . . . .6.200Pin Bearing Stress . . . . . . . . . . . . . . . . . . . . . . .7.500Pin Shear Tear-out Stress . . . . . . . . . . . . . . . . . .4.100Needle Beam Bending Stress . . . . . . . . . . . . . . .3.740Horizontal Lifeline Clamp . . . . . . . . . . . . . . . . .2.020Overall System (minimum) . . . . . . . . . . . . . . . . .2.000

Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2.275Shackle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7.847Snatch Block . . . . . . . . . . . . . . . . . . . . . . . . . . .7.098Pin Bearing Stress . . . . . . . . . . . . . . . . . . . . . . .8.300Pin Shear Tear-out Stress . . . . . . . . . . . . . . . . . .7.465Moon Clamp . . . . . . . . . . . . . . . . . . . . . . . . . . .2.000Needle Beam Bending Stress . . . . . . . . . . . . . . .3.740Overall System (minimum) . . . . . . . . . . . . . . . .2.000


• Surface preparation(conventional abrasive and UHP water jetting)

• Coating Application

• Inspection and testing

• Insulation installation, removal and repair

• Passive fire protection installation, removal and repair

• Mechanical/electrical repair and maintenance

• Decommissioning

Horizontal Lifeline System• Independent clamps connected to structural steel.

1/2" cable support line.• Maximum system span of 50ft. (with intermediate choker).• Personnel hooked onto horizontal lifeline system using full

body harness and double lanyards.• Spider used as a Rescue System.• Horizontal lifeline systems set at 6ft. Centers to ensure

100% hook-up.


Aluminum Staging and OSHA Boards• 24ft. X 2ft. aluminum staging boards with a working

load of 500 lbs. (2 x personnel).• 14ft. X 1ft. Flame retardant laminated wood OSHA boards.• Maximum loading on boards to comply with

manufacturers recommendations.• OSHA boards to be connected to needle beams using

rope lashings with cleats.• Correct manual handling techniques to be used when

lifting or carrying boards.

FACTORS OF SAFETY FACTORS OF SAFETY

Horizontal Lifeline System Moon Clamp System

SYSTEM APPLICATIONSSYSTEM APPLICATIONS

MAINASSEMBLY

HLL LIVEEND CLAMP

HHL DEADEND CLAMP

LIVE ENDMOON CLAMP

DEADEND

MOONCLAMP

NEEDLE

NEEDLEBEAM

Choker Cables

Training and Induction Process• PEC Core Compliance Training• BIS Salamis Onshore Induction• Rigger Training in accordance with API RP 2D/4th Edition• Spider Rigging Training• Crane Operator training• ‘Qualified’ Person’s for Cable Rigging System

Certification• All equipment to comply with UK PUWER and LOLER

Regulations and US ANSI Standards plus the intent of OSHA 1926.501.

• Life Line Clamps Constructed in the US of certified and engineered plate. Details available upon request

• Moon Clamps constructed in the US of of certified and engineered plate. Details available upon request

• Clamps for both horizontal lifeline and cable rigging systems engineered to ANSI A10.14 - 1991 American National Standard.

• All cable is provided with relevant certification.• System 3rd Party engineered, constructed, tested & certified.

MarathonShell E & PChevronTexacoPetroQuestBurlington ResourcesEl Paso Pipeline GroupEl Paso Field ServicesShell Pipeline LPExxonMobilSamedan

Shell WesternAmerada HessDiamond OffshoreConocoPhillipsNorcen ExplorationForce EnergyShell Gas TransmissionBPAmoco (US & UK)Kerr McGeeApache

Pecten (West Africa)Oxy USAPennzoilUnocal/SpiritLL & ENewfield.MurphyNi-SourceHunt Petroleum

A Proven Track RecordClient Previous experience Listing 1984 - To Datepo

P..O. Box 1500 • Broussard, LA 70518 • (337) 289-0092 • (337) 837-3096website: www.bissalamis.com • e-mail: [email protected] BOCO CABLE RIGGING SYSTEM



BIS Salamis can confirm that it possesses the firstGOM fully engineered cable rigging access system that is fullysafety rated to a minimum factor of 2.1. The system has beenutilized extensively both domestically and overseas (West Africaand North Sea) and is certified to meet both the exacting NorthSea UK HSE standards and ANSI A10.14 - 1991 American NationalStandard plus the intent of OSHA 1926.501.

The Boco cable rigging system utilizes a system of cables and clampswhich allows effective, multi purpose access to the followingoffshore installation areas: Underside (45+ level), Production DeckLevel, Waterline MLW plus 15 foot level and helidecks. All the saidareas have been accessed successfully in support of Salamis ServicesPainting and blasting programs since 1984.

This system requires the use of specially designed Boco MoonClamps that attach to main support Structural Support I-beams.

Independent Moon Clamps and cables are used to install debrisnets, a second set of Moon Clamps and cables for the purpose ofsupporting the Aluminum Pic Boards, OSHA Certified WoodenScaffold Boards and Personnel.

Finally, another independent set of cable is used as a horizontalfall protection system that ensures 100% “Hookup” at all times forthe personnel. The Boco system has a 100% safety record over the19 years of use and development by Salamis Services Inc.

In summary the Boco system provides a stable work platform thatcan be erected in a minimal amount of time versus conventionalscaffolding systems by multi disciplined trades personnel thusproviding considerable cost savings.

SYSTEM DESCRIPTIONSYSTEM DESCRIPTION


Training and Induction Process• PEC Core Compliance Training• BIS Salamis Onshore Induction• Rigger Training in accordance with API RP 2D/4th Edition• Spider Rigging Training• Crane Operator training• ‘Qualified’ Person’s for Cable Rigging System

Certification• All equipment to comply with UK PUWER and LOLER

Regulations and US ANSI Standards plus the intent of OSHA 1926.501.

• Life Line Clamps Constructed in the US of certified and engineered plate. Details available upon request

• Moon Clamps constructed in the US of of certified and engineered plate. Details available upon request

• Clamps for both horizontal lifeline and cable rigging systems engineered to ANSI A10.14 - 1991 American National Standard.

• All cable is provided with relevant certification.• System 3rd Party engineered, constructed, tested & certified.

MarathonShell E & PChevronTexacoPetroQuestBurlington ResourcesEl Paso Pipeline GroupEl Paso Field ServicesShell Pipeline LPExxonMobilSamedan

Shell WesternAmerada HessDiamond OffshoreConocoPhillipsNorcen ExplorationForce EnergyShell Gas TransmissionBPAmoco (US & UK)Kerr McGeeApache

Pecten (West Africa)Oxy USAPennzoilUnocal/SpiritLL & ENewfield.MurphyNi-SourceHunt Petroleum

A Proven Track RecordClient Previous experience Listing 1984 - To Datepo

P..O. Box 1500 • Broussard, LA 70518 • (337) 289-0092 • (337) 837-3096website: www.bissalamis.com • e-mail: [email protected] BOCO CABLE RIGGING SYSTEM



BIS Salamis can confirm that it possesses the firstGOM fully engineered cable rigging access system that is fullysafety rated to a minimum factor of 2.1. The system has beenutilized extensively both domestically and overseas (West Africaand North Sea) and is certified to meet both the exacting NorthSea UK HSE standards and ANSI A10.14 - 1991 American NationalStandard plus the intent of OSHA 1926.501.

The Boco cable rigging system utilizes a system of cables and clampswhich allows effective, multi purpose access to the followingoffshore installation areas: Underside (45+ level), Production DeckLevel, Waterline MLW plus 15 foot level and helidecks. All the saidareas have been accessed successfully in support of Salamis ServicesPainting and blasting programs since 1984.

This system requires the use of specially designed Boco MoonClamps that attach to main support Structural Support I-beams.

Independent Moon Clamps and cables are used to install debrisnets, a second set of Moon Clamps and cables for the purpose ofsupporting the Aluminum Pic Boards, OSHA Certified WoodenScaffold Boards and Personnel.

Finally, another independent set of cable is used as a horizontalfall protection system that ensures 100% “Hookup” at all times forthe personnel. The Boco system has a 100% safety record over the19 years of use and development by Salamis Services Inc.

In summary the Boco system provides a stable work platform thatcan be erected in a minimal amount of time versus conventionalscaffolding systems by multi disciplined trades personnel thusproviding considerable cost savings.

SYSTEM DESCRIPTIONSYSTEM DESCRIPTION


Documents

BIS Salamis Rigging Brochure