Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
MevaFlex
mf-
pd
v-g
b.p
df
St. 0
1/01
/14
Prin
ted
in G
erm
any
MF21
Ref. No. Description / Application m² kgProduct List
This product list includes all parts necessary for most applications. For parts required for special applications, please refer to the MEVA price list. Dimensions are in centimetres (cm) unless another measure is shown.
ContentsBeam clamp 8 .....................................................................................27Beam clamp 20 ...................................................................................31Beam clamp H20 .................................................................................26Beam support .....................................................................................33Brace frame ........................................................................................28Coupling unit M16 .............................................................................30Cross-bracing clamp ...........................................................................28Forked assembly stick H20 .................................................................27Forked prop head ...............................................................................26Formwork girder H20 .........................................................................22Height extension ................................................................................32MD prop ..............................................................................................25MD safety claw ...................................................................................28MEP frames .........................................................................................30MEP prop with SAS quick-lowering system ......................................24ME prop .............................................................................................23Pin .......................................................................................................26Railing clamp ......................................................................................29Retaining rail ......................................................................................32Shuttering panel 3S ............................................................................22Shuttering panel 7S ............................................................................22Tension belt with hook ......................................................................29Tensioning chain 8/2500 ....................................................................29Tensioning device ...............................................................................32Trestle for beams 40/30 ......................................................................31Tripod ..................................................................................................27Wedge clamp H20 ..............................................................................31
mf-
pd
v-g
b.p
df
St. 0
1/01
/14
Prin
ted
in G
erm
any
MF22
MevaFlex
Ref. No. Description / Application m² kg
Shuttering panel 7S
Three-layer plywood forming face, 21 mm thick, with resistant coating on both sides. Good pore structure of the concrete due to absorbent surface. Alternative: alkus all-plastic facing.
29-324-30...... Shuttering.panel.3S......... 250/50................ 1.25......... 11.8
29-324-20...... Shuttering.panel.3S......... 200/.50............... 1.00........... 9.5
41-324-10...... Shuttering.panel.3S......... 150/50................ 0.75........... 8.0
41-324-00...... Shuttering.panel.3S......... 100/50................ 0.50........... 5.5
41-324-60...... Shuttering.panel.3S......... 300/100.............. 3.00......... 31.0
41-324-35...... Shuttering.panel.3S......... 250/100.............. 2.50......... 26.0
41-324-25...... Shuttering.panel.3S......... 200/100.............. 2.00......... 21.0
Shuttering panel 3S
Not shown. Multi-layer plywood forming face, 21 mm thick, with film-coating on both sides and edge protection.
41-324-40...... Shuttering.panel.7S......... 250/125.............. 3.13......... 33.0
Ref. No. Description / Application m² kg
Formwork girder H20
Robust multi-purpose girder for the most different tasks. While the girder itself does not weigh much, it has a high load-bearing capacity (approved by building authorities). Admissible load: Q = 11 kN, M = 5 kNm.
29-206-02...... Formwork.girder.H20/245........................................... 12.3
29-206-05...... Formwork.girder.H20/290........................................... 14.5
29-206-10...... Formwork.girder.H20/330........................................... 16.5
29-206-20...... Formwork.girder.H20/390........................................... 19.5
29-206-30...... Formwork.girder.H20/450........................................... 22.5
29-206-45...... Formwork.girder.H20/490........................................... 24.5
29-206-48...... Formwork.girder.H20/590........................................... 29.5
Ref. No. Description / Application m² kg
245 - 590
8
20
MevaFlex
mf-
pd
v-g
b.p
df
St. 0
1/01
/14
Prin
ted
in G
erm
any
MF23
Ref. No. Description / Application m² kg
29-907-50...... ME.prop.250/30.............. (150-250)............................ 17.5
29-907-60...... ME.prop.350/30.............. (200-350)............................ 25.5
29-907-62...... ME.prop.450/30.............. (250-450)............................ 32.5
29-907-63...... ME.prop.550/30.............. (300-550)............................ 42.3
ME prop
Galvanized. Complies with European Standard EN 1065, class E. The admissible load capacity is 30 kN at all extensions. Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual).
Fin
e ad
just
-m
ent
11.5
12 8
8
12
Ad
just
men
t ra
ng
e 15
0–25
0
10 x
10
710
15 x
10
7
Ad
just
men
t ra
ng
e 20
0–35
0
10
14 8
814
Fin
e ad
just
-m
ent
11.5
14 88
14
19 x
10
7
Ad
just
men
t ra
ng
e 25
0–45
0
17.2 24
x 1
07
Ad
just
men
t ra
ng
e 30
0–55
0
17.8
14 12.5
7
14
mf-
pd
v-g
b.p
df
St. 0
1/01
/14
Prin
ted
in G
erm
any
MF24
MevaFlex
Ref. No. Description / Application m² kgMEP prop with SAS quick-lowering system
Complies with European Standard EN 1065, class E. The MEP prop has a steel inner tube and an aluminium outer tube with T-groove to attach reinforcing frames. The SAS quick lowering system allows the stress in the prop to be released with one strike of a hammer. After stripping the prop automatically resets and locks in the original position. The admissible load capacity is as follows when used as a single prop: MEP 300 with SAS – 40 kN at all extensions; MEP 450 with SAS – 20 kN independent from the assembly position (or 30 kN if assembled with the inner tube downwards). Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual).
29-907-65...... MEP-prop.300.with.SAS... (185-300)............................ 24.4
29-907-70...... MEP-prop.450.with.SAS... (300-450)............................ 34.4
710
7Fi
ne
adju
stm
ent
11.5
Ad
just
men
t ra
ng
e 18
5–30
0 Ad
just
men
t ra
ng
e 30
0–45
0
Fin
e ad
just
men
t 11
.57
107
Plate inner tube
8
10.2
12.5
14
1.7 2.
2
12.5
Plate outer tube
16
11
MevaFlex
mf-
pd
v-g
b.p
df
St. 0
1/01
/14
Prin
ted
in G
erm
any
MF25
Ref. No. Description / Application m² kg
Galvanized. Complies with European Standard EN 1065, class D. The admis-sible load capacity is 20 kN at all extensions. Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual).
MD prop
29-907-35...... MD.prop.300/20.............. (175-300)............................ 17.7
29-907-40...... MD.prop.400/20.............. (225-400)............................ 25.6
29-907-45...... MD.prop.550/20.............. (300-550)............................ 36.7
24 x
10
Ad
just
men
t ra
ng
e M
D 5
50/2
0:30
0–55
0
717
.8
12 x
10
713
Ad
just
men
t ra
ng
e M
D 3
00/2
0: 1
75–3
00 128
812
Fin
e ad
just
-m
ent
11.7
8
8
14
14
8
8
14
14Fi
ne
adju
st-
men
t 12
17 x
10
Ad
just
men
t ra
ng
e M
D 4
00/2
0: 2
25–4
00
713
7
mf-
pd
v-g
b.p
df
St. 0
1/01
/14
Prin
ted
in G
erm
any
MF26
MevaFlex
Ref. No. Description / Application m² kgForked prop head
Galvanized. Supports wooden formwork girders. Is attached to MD/ME steel props with pin 14/90 or to MEP props with pin 14/135. The forked prop head 20 is used with H20 formwork girders and the forked prop head 16 with H16 formwork girders.
29-206-40...... Forked.prop.head.20.................................................... 3.0
29-206-35...... Forked.prop.head.16.................................................... 2.9
18.7
(15
.7)
14.5
14.5
8.5
Ø 0.7
2317
Ø3.2
Die Zahlen in der Klammer betreffen die Trägergabel 16
Beam clamp H20
Galvanized. Is used to position interme-diate props below H20 girders. Is attached to MD/ME steel props with pin 14/90 or to MEP props with pin 14/135.
Ref. No. Description / Application m² kg
29-907-00...... Beam.clamp.H20.......................................................... 0.8
14.5
Ø 1
.4
10
Ø 1
.4
Pin Ref. No. Description / Application m² kg
Galvanized. Is used to secure forked prop heads, beam clamps etc. to props. Pin 14/90 is used for connection to steel tubes up to Ø 63 mm and pin 14/135 for connection to the aluminium outer tube of MEP props or extensions.
29-909-94...... Pin.14/90...................................................................... 0.1
29-909-90...... Pin.14/135,.(for.MEP).................................................... 0.2
4.3
614.6
14 8.3
1.7
19.3
MevaFlex
mf-
pd
v-g
b.p
df
St. 0
1/01
/14
Prin
ted
in G
erm
any
MF27
Ref. No. Description / Application m² kg
Not shown. Clamps stringers to joists and is suited for wooden formwork girders H20.
Beam clamp 8
Forked assembly stick H20
Aluminium tube with galvanized steel fork. Is used to assemble and strip stringers and joists of the MevaFlex slab formwork.
Ref. No. Description / Application m² kg
29-206-90...... Forked.assembly.stick.H20............................................ 2.2
Tripod
Galvanized auxiliary to stabilize props with Ø 48 to 80 mm. The tripod’s revolving legs allow it to be used in the middle of a room, along walls or in corners. Is attached to the aluminium profile of MEP props with the MD safety claw.
29-905-50...... Tripod......................................................................... 12.2
Ref. No. Description / Application m² kg
29-207-40...... Beam.clamp.8............................................................... 2.7
8.7
19
170
Ø 3
5 m
m
mf-
pd
v-g
b.p
df
St. 0
1/01
/14
Prin
ted
in G
erm
any
MF28
MevaFlex
Ref. No. Description / Application m² kgBrace frame
Is used as a support when erecting MD, ME and MEP props. Stepless adjustment range from 1450 to 2450 mm. Height is 1000 mm.
29-905-80...... Brace.frame..................... (1450.-.2450.mm)............... 40.5
Cross-bracing clamp
Galvanized. Is used to brace steel props with boards when the forming height exceeds 3.00 m. Usable for all prop Øs from 48 to 76 mm.
29-907-10...... Cross-bracing.clamp..................................................... 1.0
Ref. No. Description / Application m² kg
16
4 16
102.
5
154.8
149.
8
MD safety claw
Galvanized. Is used to clamp a tripod to the aluminium profile of MEP props.
Ref. No. Description / Application m² kg
29-302-10...... MD-safety.claw............................................................. 0.5
10.54 0.8
3.5
51.4
1.7
MevaFlex
mf-
pd
v-g
b.p
df
St. 0
1/01
/14
Prin
ted
in G
erm
any
MF29
Ref. No. Description / Application m² kg
Tension belt with hook
Railing clamp
29-107-20...... Railing.clamp.100......................................................... 6.0
29-107-25...... Railing.clamp.140......................................................... 9.4
Coated. Can be clamped to all types of beams and to free slab edges. Railing clamp 100: 100 cm high, clamping length 45 cm. Railing clamp 140: 140 cm high, clamping length 50 cm.
Ref. No. Description / Application m² kg
29-930-10...... Tension.belt.with.hook.and.loop................................... 3.8
29-930-15...... Tension.belt.with.hook.on.both.ends............................ 3.9
29-930-90...... Tension.belt.clamp.H20
Not shown. For safety against wind load. 50 mm wide, reinforced loop 200 mm, cranked snap hook with safety flap, DIN EN 12195. Adm. load: 25 kN (straight), 50 kN (strapped). Is attached to climbing bracket KLK or bracket extension and with safety eye to concrete wall. This can be done at the cone from the previous pour.
Tensioning chain 8/2500
Not shown. Is used to secure the slab formwork, e.g. at slab edges and on cantilevering beams. Two tensioning chains and one coupling unit are required. Ø 8 mm, length 2.50 m, load capacity 5 kN. Attention: the tensioning chains must not be used as lifting devices.
29-412-12...... Tensioning.chain.8/2500.(5.kN)..................................... 2.9
Ref. No. Description / Application m² kg
140
17.9C
lam
pin
g le
ng
th u
p t
o 0
-50
100
Cla
mp
ing
len
gth
up
to
0-4
5
14.4
mf-
pd
v-g
b.p
df
St. 0
1/01
/14
Prin
ted
in G
erm
any
MF30
MevaFlex
Ref. No. Description / Application m² kgCoupling unit M16
Not shown. Galvanized. Is used with tensioning chain 8/2500. One side with hook, one side with safety eye.
29-412-13...... Coupling.unit.M16....................................................... 0.9
MEP frames
Aluminium. Reinforcing frame that is required when building towers with MEP props. The frames are attached to the aluminium outer tube of the MEP props or extension pieces using the integrated quick connector.
29-909-30...... MEP-frame.330........................................................... 15.7
29-909-25...... MEP-frame.220........................................................... 11.9
29-909-20...... MEP-frame.170............................................................. 9.9
29-909-15...... MEP-frame.110............................................................. 7.8
29-909-10...... MEP-frame.55............................................................... 6.4
Ref. No. Description / Application m² kg
320
56210
56
160
56
100
56
45
56
Hebel in Arretier-stellung
integrierter Schnellanschluss
Aluminium-profil
MevaFlex
mf-
pd
v-g
b.p
df
St. 0
1/01
/14
Prin
ted
in G
erm
any
MF31
Ref. No. Description / Application m² kg
Beam clamp 20
Trestle for beams 40/30
Galvanized. Is used as formwork for concrete beams or for stop ends at slab edges.
29-500-10...... Trestle.for.beams.40/30................................................. 5.1
Ref. No. Description / Application m² kg
Galvanized. Is used to attach the trestle for beams 40/30 to the joist. Suitable for formwork girders up to 24 cm high.
79-500-30...... Beam.clamp.20............................................................. 1.1
29.8
39
5.8
10
2.78.
4
264
2
12
23.2
5.6
10.315.9
10.3
Klemmbereich 0 - 26
31.5
33
1417
Wedge clamp H20 Ref. No. Description / Application m² kg
Galvanized. Is used to attach the trestle for beams 40/30 at the top chord of the cross beam H20.
29-500-45...... Wedge.clamp.H20........................................................ 1.9
mf-
pd
v-g
b.p
df
St. 0
1/01
/14
Prin
ted
in G
erm
any
MF32
MevaFlex
Ref. No. Description / Application m² kg
Tensioning device Ref. No. Description / Application m² kg
Retaining rail
Galvanized. Secures the trestle for beams 40/30. Is attached together with the tensioning device beneath the cross beam (2 x H20).
Galvanized. Optimizes the distance between trestles and tightly connects the trestle for beams 40/30 and the retaining rail.
29-500-20...... Retaining.rail................................................................. 6.5
29-500-35...... Tensioning.device.......................................................... 2.2
Height extension
Galvanized. Extends the trestle for beams 40/30 in height. Is inserted into the trestle and adjusted to the required height of the beam, then secured with the integrated hammerhead screw.
29-500-40...... Height.extension........................................................... 2.3
Ref. No. Description / Application m² kg
89
39.4 9
28.52 28 28.5 2
10.7
4.6
2.7
44
63.8
62.2
7.7
413.8 1.3
8.4
5.5
MevaFlex
mf-
pd
v-g
b.p
df
St. 0
1/01
/14
Prin
ted
in G
erm
any
MF33
Ref. No. Description / Application m² kgBeam support
Galvanized. Is attached to the height extension with the integrated hammerhead screw and supports a wooden H20 girder or squared timber.
29-500-25...... Beam.support............................................................... 0.6
8
6
6
10
6
mf-
pd
v-g
b.p
df
St. 0
1/01
/14
Prin
ted
in G
erm
any
MF34
MevaFlex
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Notes
MevaFlex
mf-
pd
v-g
b.p
df
St. 0
1/01
/14
Prin
ted
in G
erm
any
MF35
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Notes
mf-
pd
v-g
b.p
df
St. 0
1/01
/14
Prin
ted
in G
erm
any
Headquarters (Germany) Logistic Centers International Sales & Service
MEVA Schalungs-Systeme GmbH
Industriestraße 5
D-72221 Haiterbach
Tel. +49 7456 692-01
Fax +49 7456 692-66
www.meva.de
A-Pfaffstätten, Tel. 02252 20900-0
AUS-Adelaide, Tel. 08 82634377
B-Kruibeke, Tel. 03 250 11 11
CDN-Toronto, Tel. 416 5766397
CHSeon, Tel. 062 7697100
CO-Bogotá, Tel. 01 5204236
FSarreguemines, Tel. 0387 959938
GBTamworth, Tel. 01827 60217
HBudapest, Tel. 01 2722222
HR-Bestovje, Tel 013 323 666
IND-Mumbai, Tel. 022 27563430
LT-Kaunas, Tel. 0684 82795
MAL-Perak, Tel. 12 5209337
N-Oslo, Tel. 067 154200
NLGouda, Tel. 0182 570770
PA-Panama City 507 2372222
PL-Bialystok, Tel. 085 6768159
RUSMoskva, Tel. 495 7813737
SGP-Singapore, Tel. 67354459
SLO-Petrovce, Tel. 03 7131500
UAEDubai, Tel. 04 3411180
USASpringfield, Tel. 937 3280022
A-Pfaffstätten, Tel. +43 2252 20900-0
D-Berlin, Tel. +49 3375 90300
D-Haiterbach, Tel. +49 7456 692-01
D-Hannover, Tel. +49 511 949930
H-Budapest, Tel. +36 1 2722222
UAEDubai, Tel. +971 4 3411180
USA-Springfield, Tel. +1 937 3280022